ITU-R Liaison Group Report - Session #63 Opening Plenary IEEE 802.16 Presentation Submission...

6
ITU-R Liaison Group Report - Session #63 Opening Plenary IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number: IEEE L802.16-09/0088r1 Date Submitted: 2009-08-31 Source: Reza Arefi Voice: +1 503 830 5485 Intel Corporation E-mail: [email protected] Venue: IEEE 802.16 Session #63, WG Opening Plenary Base Contribution: None. Purpose: ITU-R Liaison Group presentation to Opening Plenary of the WG, containing plan for the week Notice: This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.16. Patent Policy: The contributor is familiar with the IEEE-SA Patent Policy and Procedures: <http://standards.ieee.org/guides/bylaws/sect6-7 .html#6 > and <http://standards.ieee.org/guides/opman/sect6.html#6.3 >. Further information is located at <http://standards.ieee.org/board/pat/pat-material.html > and <http://standards.ieee.org/board/pat >.

Transcript of ITU-R Liaison Group Report - Session #63 Opening Plenary IEEE 802.16 Presentation Submission...

Page 1: ITU-R Liaison Group Report - Session #63 Opening Plenary IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number: IEEE L802.16-09/0088r1.

ITU-R Liaison Group Report - Session #63 Opening Plenary

IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number:IEEE L802.16-09/0088r1Date Submitted:2009-08-31Source:Reza Arefi Voice: +1 503 830 5485Intel Corporation E-mail: [email protected]

Venue:IEEE 802.16 Session #63, WG Opening PlenaryBase Contribution:None.Purpose:ITU-R Liaison Group presentation to Opening Plenary of the WG, containing plan for the weekNotice:This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material contained herein.

Release:The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this

contribution may be made public by IEEE 802.16.

Patent Policy:The contributor is familiar with the IEEE-SA Patent Policy and Procedures:<http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and <http://standards.ieee.org/guides/opman/sect6.html#6.3>.Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and <http://standards.ieee.org/board/pat >.

Page 2: ITU-R Liaison Group Report - Session #63 Opening Plenary IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number: IEEE L802.16-09/0088r1.

ITU-R Liaison Group Report - Session #63 Opening Plenary

Reza Arefi

802.16’s ITU-R Liaison Official

IEEE 802.16 Session #63Jeju Island, Korea, 31 September to 3 August 2009

Page 3: ITU-R Liaison Group Report - Session #63 Opening Plenary IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number: IEEE L802.16-09/0088r1.

Relevant Documents from Session #62

• IEEE L802.16-08/058r4IEEE 802.16 ITU-R Liaison Group Workplan

• IEEE L802.16-09/0084r1ITU-R Liaison Group Report to Closing Plenary of Session #62

• IEEE L802.16-09/0079Call for Comments and Contributions for IMT-Advanced submission templates

and Simulation Package

========== Also ===========• IEEE L802.16-08/079IEEE 802.18 IMT-Advanced review process (IEEE 802.18-08-0058/r6)

Page 4: ITU-R Liaison Group Report - Session #63 Opening Plenary IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number: IEEE L802.16-09/0088r1.

Input Documents for Session #63• Contributions submitted on IMT-Advanced work including to the

correspondence groupIEEE C802.16itu-09/0020 - Preliminary system-level simulation results for the Performance Compliance Template of IMT-Advanced; Source: ASB

IEEE C802.16itu-09/0021 - An Overview of IEEE 802.16m Technology; Source: Multiple contributors

IEEE C802.16itu-09/0022 - Proposed updates of L802.16-09/0050d1 ([Draft] Submission of a candidate IMT-Advanced RIT based on IEEE 802.16 (Part I) ; Source: Multiple contributors

IEEE C802.16itu-09/0023 - Proposed updates of L802.16-09/0051d1 ([Draft] Submission of a candidate IMT-Advanced RIT based on IEEE 802.16 (Part II) – SCT and Items 4.2.4.3.2 (Peak spectral efficiency), 4.2.4.3.3 (Bandwidth), 4.2.4.3.5 (Control plane latency), 4.2.4.3.6 (User plane latency), 4.2.4.3.9 (Intra-frequency hand-over interruption time), 4.2.4.3.10 (Inter-frequency handover interruption time within a spectrum band), 4.2.4.3.11 (Inter-frequency handover interruption time between spectrum bands), 4.2.4.3.12 (Inter-system handover) for PCT ; Source: Multiple contributors

IEEE C802.16itu-09/0024 - Proposed updates to L802.16-09/0050d1 - Section 4.2 (Description template - link budget) of [Draft] Submission of a candidate IMT-Advanced RIT based on IEEE 802.16 (Part I) ; Source: Multiple contributors

• Liaison Statement from WiMAX Forum TWGIEEE L802.16-09/0087r1 - WiMAX TWG Contribution to - [DRAFT] SUBMISSION OF A CANDIDATE IMT-ADVANCED RIT BASED ON IEEE 802.16 (PART I) (L80216-09_0050d1)

• Liaison Statement from WP 5DIEEE L802.16-09/0086 – Liaison statement to EOs re IMT parameters in the UHF band (2009-07-22)

Page 5: ITU-R Liaison Group Report - Session #63 Opening Plenary IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number: IEEE L802.16-09/0088r1.

Proposed Objectives for Session #63

per Workplan•Conclude submission package including self evaluation for IMT-Advanced (Contribution #3, Parts I, II, and III)

•Start development of presentation to 3rd IMT-Advanced workshop

•Send IMT-Advanced submission package to 802.18 and interested external organizations

beyond Workplan•Review input contributions on IMT-Advanced topics•Review input liaison statements and prepare proper responses as appropriate

Page 6: ITU-R Liaison Group Report - Session #63 Opening Plenary IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number: IEEE L802.16-09/0088r1.

Proposed Agenda for the Week(Room: Weolla)

Monday Tuesday Wednesday Thursday

AM8:30 AM to 12:00 PM(Mon 10:00 AM to 12:00 AM)

1) Introduction and approval of the agenda

2) Review and follow workplan of IEEE L802.16-08/058r4

4) Consider correspondence group activity

5) Review input contributions on IMT-Advanced and update drafts of working documents (Parts I, II, III)

[report to mid-week plenary]

7) Review and fine-tune draft Contribution #3 on IMT-Advanced submission (Parts I, II, III)

8) Finalize draft Contribution #3 (Parts I, II, III)

[update to TGm]

9) Prepare responses for input Liaison Statements and any other output documents to external organizations as necessary

10) Update work plan

11) Other business

PM1:30 PM to 6:00 PM

5) Review input contributions on IMT-Advanced and update drafts of working documents (Parts I, II, III)

5) Review input contributions on IMT-Advanced and update drafts of working documents (Parts I, II, III)

6) Upload draft contribution #3 on IMT-Advanced submission (Parts I, II, III) for WG review

7) Review and fine-tune draft Contribution #3 on IMT-Advanced submission (Parts I, II, III)