Calder Stewart Roofing’s newest roof cladding profile, Heritage Tray represents the evolution of its

already popular Euro-Tray product line, with a new emphasis on economy and flexibility. Conceived

around the market leading stylishness of its predecessor, Heritage Tray has the advantage of

requiring no additional plywood substrate, thus reducing costs. Additionally, Heritage Tray offers

the flexibility of being roll formed on-site, an ideal solution where extra-long trays are required,

storage is limited or potential transport damage needs to be eliminated. Heritage Tray comes with

a cost saving, custom flashing solution for eaves and retains its warranty if you later decide to install

a solar PVL laminate. For the architect or builder wishing to utilise a stylish profile in their designs

while at the same time reduce overall project costs, Heritage Tray represents a smart solution.

So, if you’re after a smart roof that’s going to last, call 0800 115 232 or visit us at roofer.co.nz

OVER 80 COLOURS MIX AND MATCH TO FIND YOURS

It’s got the looks, but won’t cost the earth.

Her

itage

Tra

yTMH

erita

ge T

ray

Heritage Tray in New Denim Blue

A Profile That Offers Genuine Savings.

Modelled after our popular Euro-Tray product line, Heritage Tray represents

an elegant solution from the point of view of aesthetics and economy.

It requires no plywood substrate, thus saving on costs, and can be flexibly

roll formed on-site.

Ratings

AS4040.1/AS4040.2/ AS/NZS1170.2 Tested

Design Note

Oil canning, flatness or waviness is a condition that may occur:

(1) during the roll forming process

(2) under thermal expansion, or

(3) during the installation process.

It may be more noticeable with wide panned profiles or when

using softer materials like aluminium. This does not cause any

damage to the product, however the builder/architect needs to

be aware that this may affect aesthetic outcomes.

Please refer to the NZ Metal Roofing Code Practice- Section 2.3.5

Additional Profile InformationAvailable in the following materials:

• Plain - Galvanised / Zn/AL

• Colorcote - ZR8 / ZM8 / ZRX / ZMX / AR8 / ARX

Note: Some materials such as precious metals, non standard Colorcote paint systems and heavier gauges, along with the required fixings are not held in stock. Please consult with a Calder Stewart Sales Representative before ordering.

Heritage Tray Residential, Alpine

Heritage Tray Cross Sectional Profile Drawing

Heritage Tray SpecificationsBMT Min Pitch Max Span (Int/End) Weight/mtr0.55mm 8º 500 / 500 2.600.70mm Alu 8º 500 / 500 1.08

Profile dimensions are nominal.

Visit us at roofer.co.nz

504 - EFFECTIVE COVER

528 - SHEET WIDTH

25

© Calder Stewart Roofing. Revision 1 September 2013.