iTest.LiteData Acquisition and Control System

Configurable test automation system ideal for steady-state and ramped-modal test cycles.

Test automation systems are used for a wide range of applications, from simple to com-plex. Built on the iTest platform,  iTest.Lite is the ideal solution for test beds performing durability, end-of-line and lower-level R&D testing, typically involving steady-state or ramped-modal test cycles. The standard iTest.Lite system includes FlexEdit, a config-uration tool for accessing and editing test cell parameters such as I/O channels, limits, and test schedules. For the integration of

test instrumentation, iTest.Lite has access to the same large device library as iTest.Pro.

iTest.Lite is comprised of two main com-ponents, the AutomationPanel user inter-face and FlexEdit, a simplified, pre-config-ured task-based work flow interface. Like iTest.Pro, iTest.Lite easily integrates with devices from a variety of vendors, and is compatible with A&D’s LabWorX lab man-agement suite.

The iTest.Lite Main Page

• Includes 2-3 device drivers and standard test cycles; additional drivers can be added

• Optional RT upgrade

• 4,000 user-defined channels • High-speed time-aligned data

logging

• Customizable GUIs

Features

• Preconfigured with standard test schedules and device drivers

• No programming skills re-quired

• Integrates with A&D’s LabWorX lab management suite

Benefits

iTest.LiteData Acquisition and Control System

==

Americas A&D Technology, Inc.Ann Arbor, MI USAPh: +1 (734)973 1111 www.AandDTech.com

EuropeA&D Europe, GmbHGriesheim, GermanyPH: +49 (0)6155-605 250www.AandDEurope.com

A&D Europe - UK BranchAbingdon, Oxon, UKPH: +44 (0)1235-550 420www.AandDEurope.com

A&D Company, Ltd.Tokyo, JapanPH: +81 (0)3-5391 2753www.AandD.co.jp

Asia A&D Technology Trading Co.Shanghai, China PH: +86 (0)21-3393 2340www.AandDTech.com

AustraliaA&D Australasia Pty Ltd.Kensington, VIC, AustraliaPH: +61 (0)3-9372 1522www.andaustralasia.com.au

v040416 Copyright 2016 A&D Technology, Inc. All rights reserved. All products and brand names are trademarks or registered trademarks of their respective holders. In keeping with our commitment to continuous product improvement, information contained herein is subject to change. Printed in the U.S.A.

Architecture

iTest FamilyiTest.ProA full-featured, expandable test automation and control system for engine and powertrain test beds with the most challenging needs, such as those running transient test schedules, and tests involving simulation.

Offline Development SuiteThe configuration portion of iTest, intended for scripting, schedule creation, etc.

iTest.LiteConfigurable solution ideal for engine test beds performing durability, end-of-line and lower-level R&D testing, typically involv-ing steady-state or ramped modal test cycles.

iTest.MicroTargeted for test systems running simple, repetitive sequences (e.g. on/off), ususally found in component or end-of-line quality testing; test control and status dashboards are configurable through the LabWorX lab management system.

iViewBoxA hardware-only solution for integrating non-PC based systems or those with embedded controllers into the LabWorX lab management system.