ITEM :1 · Web viewThe monitor is capable of displaying 8 waveforms simultaneously in a...

ITEM :1 ADULT SCALE QTY :7

SPECIFICATIONS :

Mechanical scale.Capacity 140kg x 100g.High rod included.Hand post included.Wheels for transportation.Platforms cover.Complete with all accessories and consumables needed to work completely as specified

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin and source(clarification certificate ), date of start manufacturing this model , and date of last upgrading ,

are clear in the offer New catalogue is attached with the offer, including data sheet. warranty two years from installation extendable for the same down time period during warranty or 30 months from

delivery at least Warranty for not less than 10 years for spare parts. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the

certificates for evaluation The equipment must pass the acceptance test of MOH biomedical Engineering unit.

Component number 1

ITEM :2 AIR PURIFIRE QTY :3

SPECIFICATIONS :To be used in the operation theater for sterilizationAir purifier machine including Pre , post and carbon filters High quality HEPA filtration. (not less than 99.95% of particles 0.3 microns or larger) Circulation pump (fan) with 3 speeds (low ,med and high)

Ultra violet lamp qty 4 , over 13000 microwatt of germicidal dosage Stainless steel construction Time counter for UV lamps.Field of work: remove a wide range of pollutants such as: Formaldehyde , Phenol , Ozone , Cigarette smoke , Paint fumes, Urea Ethanol, Bacteria and VirusesCleaning Capacity: Up to 130 square m , rated for 6 air changes per hour Max .Air Flow Rate : 350 CFMNoise level : less than 60 decibelsMobile on 4 castorsPower 220v/50 HzComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Pre ,post ,carbon and HEPA filters UV lamp



delivery at least Warranty for not less than 10 years for spare parts. Prices for all mentioned accessories and spares. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE , --- will be taken into consideration ,the offer must include

the certificates for evaluation. The equipment must pass the acceptance test of MOH biomedical Engineering unit.

ITEM :3 AMBO BAG SET QTY :3

SPECIFICATIONS :

3 sizes: adult, child, infant Complete with connector and mask Made of silicon

ITEM :4 ANALYTICAL BALANCE QTY :1

SPECIFICATIONS :

Weighing range 1200gRead ability 10mgDigital displayAdjustable feet level220V, 50Hz supplyMode key to change the unitsDust cover is included

Complete with all accessories and consumables needed to work completely as specified



delivery at least Warranty for not less than 10 years for spare parts Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the

certificates for evaluation The equipment must pass the acceptance test of MOH biomedical Engineering unit.

ITEM :5ANESTHESIA MACHINE

QTY :3

SPECIFICATIONS : ANESTHESIA MACHINE

Composition Anesthesia machine with 2 drawers, top shelf, work area, shelf for gas monitor ,built in ventilator, ventilator screen, absorber bag arm, canister, flow meters, anesthetic gas scavenging system ,patient circuit, test lugs for adult, child and pediatrics. Specification for Anesthesia machine

Good brand name Anesthesia machine to be equipped with Interlock holding for two vaporizers Autoclavable circle system with CO2 absorber canister, patient tubing system, and switch from automatic to manual

ventilation gas mixer with security system:

- O2-deficiency detection - N2O blockage - O2 emergency dosage in case of system failure - automatic check for correct covering of the single gas supply channels every time the device is switched on

Vaporizers : - Tool-free installation

- (2 pcs): Halothane and Isoflurane - slandered type

Ventilator for Anesthesia machine: - A separate anesthesia ventilator integrated in the anesthesia machine - Pressure controlled - Volume control

- SIMV, PSV modes- Pressure support with apnea backup ventilation- I:E ratio: 1:0.5 - 1:8- Acoustic and optic alarms: ventilator failure, set volume not delivered, low O2 supply pressure, low airway pressure,

adjustable alarm limits - Tidal volume : 5-1500 ml in pressure control , 20-1500 in volume control- Respiratory rate: 6 - 60 breaths/m at least- PMAX: 10 - 60 mbar- Minute volume range 0-99.9 l/m- PEEP range : 4-30 cm H2O- Peak gas flow : 120 l/m

Monitor for ventilator :- expiratory minute volume : 0-99.9 l/m- expiratory tidal volume : 0-1500 ml- concentration of oxygen : 0-100%- pressure (peak, plateau, mean) :0-120cm H2O- pressure wave form speed : 4-70 breaths/m according to time

hypoxic guard system included

reusable (autoclavable ) patient circuit latex free with autoclavable flow sensors AGS (anesthetic gas scavenging system): provided O2 Hose, 5m: 1pc , N2O Hose, 5m: 1pc, Compressed Air Hose,5m: 1pc DIN type connectors O2 and N2O Connectors pin index for cylinders O2 and N2O cylinders are included Adult , child ,and pediatrics patient circuits with flow sensors included


OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Patient Circuit Reusable for adult Patient circuit reusable for child Patient circuit reusable for infants Flow sensors



delivery at least Warranty for not less than 10 years for spare parts. Prices for all mentioned accessories and spares. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the

certificates for evaluation The equipment must pass the acceptance test of MOH biomedical Engineering unit. Service training for one MOH engineer in the manufacturer

ITEM :6AUTOMATIC BLOOD PRESSURE MONITOR

QTY :8

SPECIFICATIONS :Brand name

Manual and automatic modesSelectable Intervals for Automatic modeAudible and Visual AlarmsCan be used for adult ,pediatric and neonateMeasuring Ranges:

Systolic pressure 30-250mm Hg for adult /ped. 30-140 mmHg for neonateDiastolic Pressure 10-220mmHg for adult /ped. 10-110 mmHg for neonateMean arterial pressure 20-230 for adult /ped. 20-125 mmHg for neonateHeart rate 30-200 beats/min for adult /ped. 30-220 mmHg for neonate

Storage for the last two values.Complete with cuffs for adult, pediatric and neonate.Adjustable alarm limits.220V/50HzInternal battery for more than 120 minStand with counter weight includedComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Blood pressure cuff for adult Blood pressure cuff for pediatric Blood pressure cuff for neonate




certificates for evaluation. The equipment must pass the acceptance test of MOH biomedical Engineering unit.

ITEM :7 MICRO PIPITTE QTY :4

SPECIFICATIONS :

Digital, variable capacity 200-1000 micro l.Digital , variable capacity 40-200 micro lDigital , variable capacity 5-40 micro lPrecession > or = 99%

ITEM :8DIGITAL MULTIMETER

QTY :1

SPECIFICATIONS :

Voltage DC : Maximum :600V , Accuracy : 7% , Resolution : 1mVVoltage AC : Maximum :600V , Accuracy : 1% , Resolution : 1mVCurrent DC : Maximum :10A , Accuracy : 1% , Resolution : 1mACurrent AC : Maximum :10A , Accuracy : 1% , Resolution : 1mAResistance : Maximum :40 MΩ , Accuracy : 0.9% , Resolution : 0.1Ω Capacitance : Maximum :10000 µF , Accuracy : 1.9% , Resolution : 1nF Frequency : Maximum :50 KHz , Accuracy : 0.1% , Resolution : 0.01 HzDiod measurment is availableContinuty measurment is availableCase : hard caseProbes are includedAlkaline batterey is included


Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin , date of start manufacturing this model , and date of last upgrading , are clear in the offer New catalogue is attached with the offer. warranty one year from installation extendable for the same down time period during warranty or 18 months from delivery

at least Warranty for not less than 10 years extendable for the same down time period during warranty for spare parts. Prices for all mentioned accessories and spares. Service and operation manuals original and copy (2 sets in English ) are included

ITEM :9 BABY COT QTY :10

SPECIFICATIONS :Height adjustable mechanically by gas spring from 65-90cm approx.Mechanical tilting with springTrendelenburg ± 14°

Powder coating polyester standPlastic baby cribCrib dimension 65*60 cm approx.Weight limit not less than 15 kg4 castors with brake mechanismFoam mattress with washable cover includedComplete with all accessories and consumables needed to work completely as specified

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin and source(clarification certificate ), New catalogue is attached with the offer, including data sheet. warranty two years from installation or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the


ITEM :10BILIRUBIN METER

QTY :1

SPECIFICATIONS :

For measurement of total and direct bilirubin

Range: 0-30mg/dlSample: centrifuged whole blood ( serum sample)Sample volume: less than 70μlReading cuvette: heparinized hematocrit capillaryUnit of measurement: mg/dl or μmol/lMeasurement system: Photometric single beamOptical filters: 455 and 575 nmDigital displayBuilt-in printer (optional)Automatic zero






ITEM :11 BLOOD BAG SHAKER QTY :1

SPECIFICATIONS :

Continuous agitation of blood bagsDisplay of blood volume to be collectedPre selection of blood volume to be collectedAdjustable shaking speed

Weight of the bagDigital screenAlarm or buzzer is includedCalibration weight is included220V,50 Hz




delivery at least Warranty for not less than 10 years for spare parts Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the


ITEM :12 BLOOD BANK REFRIGERATOR QTY :1

SPECIFICATIONS :

Height from 16-18 ftCapacity 400-600lTemperature from 2 to 8 dig.Alarm for power fail , over temperature ,under temperature ,door open

6 shelves insideInternal lightGlass doorCastorsChartInstallation and local training is included






ITEM :13 BLOOD GAS / ELECTROLYTE ANALYZER QTY :1

SPECIFICATIONS :Blood Gas / Electrolyte/ Oximetry AnalyzerMeasured Parameters: pH, PO2, PCO2, NA, K , Ca ,Cl, sO2%, ctHbCalculated : cHCO3, Hct, ctCo2 in plasma and blood, Base excess, Anion gap ( not less that 30 calculated parameters)Software Platform: Windows XP, Built-in PC Intel Processor , 40GB hard diskSample throughput: not less than 20 samples per hourSample type: Whole blood (Heparinized), Arterial, Venous, Mixed Venous, Capillary

Remembranable electrodesData Capacity : Hard Disk 40GB 1500 Patient Results , Previous Cal Results and more than 1000 QC Results Calibration method: 1-point: fully automatic and Programmable 2-point; Fully automatic and ProgrammableTFT 10.4” VGA color touch screen Display: for all measured and calculated parametersPrinter: built in High speed thermal printerRead / Write CD and USP support for easy data back upOnline Assistance with Audio –enhanced video tutorialsCustomized user – defined protocols Interface capability: RS232C (standard)Automatic quality control Device built-in with not less than 18 positions


OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- All electrodes Remembrane kit for all electrodes Complete set of solutions ,reagents , cleaning and replinshing Gas cylinder full Printer paper 5 rolls

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin and source(clarification certificate ), date of start manufacturing this model , and date of last upgrading , are clear in

the offer New catalogue is attached with the offer, including data sheet. warranty two years from installation extendable for the same down time period during warranty or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Prices for all mentioned accessories and spares. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the certificates

for evaluation. The equipment must pass the acceptance test of MOH biomedical Engineering unit.

ITEM :14 BLOOD WARMER QTY :3

SPECIFICATIONS :Microprocessor controlledAdjustable TemperatureDigital Display for temp.Temperature setting :around 33 ْْC to 45 ْ C (±0.5 ْ c)Warm-up time : approx.60 secAlarm :

Auto-shutoff at High temperatureAudible and visual indication low temperature Open system blood lines220V/50Hz power req.Stand with counter weight included


OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Set of blood lines 50





ITEM :15 BOWEL STAND QTY :16SPECIFICATIONS :

Stainless steel On 4 castorsSignal Bowl StandDimensions: 600 x 650 x 800mm


Your offer will not be taken in consideration unless:- Country of origin , date of start manufacturing this model , and date of last upgrading , are clear in the offer New catalogue is attached with the offer. Warranty for not less than 10 years for spare parts.

ITEM :16 CAST CUTTER QTY :1

SPECIFICATIONS :

Oscillating cast cutter 220VIncluding: wrenches 12 & 13mmSaw blade normal Ø50 mm and Ø65mmWith dust removal On portable tableStainless steel removable blades are included


OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Set of blades Key to change the blade





ITEM :17 CELL WASHER QTY :1

SPECIFICATIONS :

2rotorsMinimum 12 tubes rotor for 12*75 tubesDoor lock with ledAdjustable speed TimerBuzzer220V , 50Hz






ITEM :18 TUBE CENTRIFUGE QTY :3

SPECIFICATIONS :

Speed not less than 600 rpm step of 100Specimen capacity 12 tube/runSample size 10 ml tubeBuilt in timer and speed control Digital displayBrakeDoor lock and safety protected lid

Spare brushes220v/50hzComplete with all accessories and consumables needed to work completely as specified





ITEM :19 CHEMISTRY ANALYZER QTY :1

SPECIFICATIONS :

Full Automatic Chemistry AnalyzerOpen systemProgrammable for not less than 36 testsNot less than 30 samples/RunSample cup about 5mlRotational movement for all syringes with stepper motorsCalibration: Linear & non linear with possibility of 2 point Calibration

Sample volume : not more than 60ulDiscrete, selective single line AnalyzerLCDThermal printerRoutine and STAT patient SamplesComplete with all accessories and consumables needed to work completely as specified





ITEM: 20 BACTERIA COLONY COUNTER QTY: 1

SPECIFICATIONS:

For counting bacteria growing on area contaminated in different size of petri-dishes.For petri-dishes up to 10cm diameterIllumination by florescence lampMagnifying glass 100mm on unadjustable focusing armModes of counting:Manual push button

Needle point probing Marking pen probing220V; 50HzComplete with all accessories and consumables needed to work completely as specified





ITEM :21 DEFIBRILLATOR QTY : 11

SPECIFICATIONS :

Biphasic type Semiautomatic and manual modes Energy setting Level: 2-270J Paddle: External (adult, Child)

Cartographic Function: Provided Recharging time: About 5sec Printer: Built in, Thermal Head ECG synchronous and asynchronous Lead select to be displayed 3 and 5 ECG cables included Fully defibrillator protection on the input Detects pace maker pulses Heart rate : 25-300 bpm Memory not less than 30 ECG strips of 20 sec. Power: 220 V AC 50/60HZ

Complete with all accessories and consumables needed to work completely as specifiedOPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:-Cable for ECG 1Dust Cover 1Chart Paper 5 ROLLSElectrode Jell 5 TUBES




certificates for evaluation. The equipment must pass the acceptance test of MOH biomedical Engineering unit. Service training for one MOH engineer in the manufacturer

ITEM :22 DELEVARY TABLE QTY :3

SPECIFICATIONS :

Multi purpose obstetric systemRemovable panels for simple cleaning.

Accessory trolley with two braked castors.Fluid collection bowlLeg rests for lithotomy position.Leg section of two-part mattress.Storage for removable footboard (and headboard). Removable step for patient access and ‘chair’ positionAdjustable side rails to reassure and grip.Fully enclosed height adjustment mechanism.Height raising pedal - one each side.Height lowering pedal - one each side.Four anti static breaking castors.Accessible brake bar with steering facility.Fully length 2200mm Approx.hortened lengths in chair position 1700mm Approx.Minimum height 500mm Approx.Maximum height 800mm Approx.

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin and source(clarification certificate ), New catalogue is attached with the offer, including data sheet. warranty two years from installation or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the


ITEM :23DIAGNOSTIC SET OPHTHALMOSCOPE/ OTOSCOPE

QTY :17

SPECIFICATIONS :

portable(hand held)case typeincluding the followingOphthalmoscopeOtoscope complete with handle and earring heads


OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Ophthalmoscope lamp Otoscope lamp


are clear in the offer New catalogue is attached with the offer, including data sheet. warranty two years from installation or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Prices for all mentioned accessories and spares. Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the


ITEM :24 LYRENGOSCOPE SET QTY :5

SPECIFICATIONS :

Portable (hand held)Case type4 blades including zero , 1,2,3 sizesBattery is includedbulb is included in each blade


are clear in the offer New catalogue is attached with the offer, including data sheet. warranty two years from installation or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the


ITEM :25 DONER CHAIR QTY :1

SPECIFICATIONS :Electric chair with remote controlHeight adjustment electrically from 55 to 80 cm approx.Separate electric adjustment of back and leg rest from sitting to horizontal position.Leg rest can be folded up in setting positionRemovable head restSeat inclination up to –5 degreesSeat width not less than 540 mm

Length not less than 1000 mm in sitting and 1800 mm in horizontal position3 independent 24 v motorswith adjustable arm rests for blood withdrawal4 castors with locking device


are clear in the offer New catalogue is attached with the offer, including data sheet. warranty two years from installation or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the


ITEM: 26 DRESSING TROLLY QTY:17

SPECIFICATIONS:

Stainless steelWith two shelvesTray shapedEquipped with bottle holderMovable rectangular waste binDrawer and bowl are placedPush handle

4 castors 2 brakesDimension 900 *500 * 850h mm Approx. Complete with all accessories and consumables needed to work completely as specified

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin and source(clarification certificate ), New catalogue is attached with the offer, including data sheet. warranty two years from installation or 30 months from delivery at least

ITEM :27DRY OVEN

QTY :1

SPECIFICATIONS :

Capacity of your choice 50 litersFully automated hot air sterilizerAdjustable temperature 0- 200CStainless steel structure powder paintedIncludes 4 perforated anodized aluminum traysSecond safety thermostat for over temperature

Temperature gauge Door stainless steelTimer 0- 120 Min.LED indicators of statusPower 220 VAC





ITEM :28 ECG SIMULATOR QTY :1

SPECIFICATIONS :

12 lead configuration ECG amplitude: 0.5 , 1.0 , 1.5 , 2.0 mVRates: 30-300 B/minPulse: 30, 60 bpm with 60 ms pulse widthSquare wave: 2.0, 0.125 Hz

Sine wave: 0.5, 5, 10, 40, 50, 60, 100 HzTriangle wave: 2.0, 2.5 HzBlood pressure measurements are includedTemperature measurements are includedTemp probe is included





ITEM: 29ELECTROCARDIOGRAPH

QTY :12

SPECIFICATIONS :Leads: 12 standard leads acquired simultaneously and continuouslyThree real times continuous with rhythm, interpretation and measurementsAdult and Pediatricwriter speed : 5,10,25 or 50mm/secLCD display : backlit graphic display around 5˝display channel:1, 3, 6 ,12operation modes : Auto or Manualcopy button for generating multiple copies

Thermal printerRechargeable battery Battery power capacity not less than tow hourpower:220V AC 50/60HzCart Is includedCable holder is includedECG cableLimp electrodes 4Chest pump electrodes 8Jell tube 5ECG paper 10

Complete with all accessories and consumables needed to work completely as specifiedOPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:-

ECG cable Paper 10 rolls





ITEM :30 ELECTROSURGERY UNIT QTY :3

SPECIFICATIONS :-Output method : Bipolar and mono polar modes-Outputs : Cut mode; 3 modes (cut, blend 1 and blend2)

Coagulation modes:2 modes(coagulation and spray coagulation) -Output characteristics : 350 kHz-Maximum output : Mono polar: Cut – 120w, blend 1-250w, blend2 – 200w,

Coagulation- 100w, spray coagulation-120w Bipolar: Cut-120, Blend 1-250w, Blend 2-80w, Coagulation – 70w- Adjustment increment : 10W increment (5W increment at 50w and below)- Output control : Control with foot switch, hand switch- Output time : 10 second ON and 30 second OFF- Accessories: -Electrode handle w. double finger switch , knife electrode , Needle electrode -Bipolar forceps straight , Bipolar forceps curved , Connecting cable for bipolar forceps

-Single pedal foot switch , Neutral electrode , Connecting cable for neutral electrode - Foot pedal


Neutral electrode reusable knife electrode disposable





ITEM :31ELISA READER WITH PRINTER , WASHER AND INCUBATOR

QTY :1

SPECIFICATIONS: Complete consist of

READER :- Full automatic reader with microprocessor VIS and UV ranges Filters 304 , 405 , 450 , 492 , 545 , 600 , 630

Standered vessel with 96 wells LCD display Alpha numeric key pad and display

Memory for 50 tests at least Speed not more than 2 min/ run Can be used with serial or parallel printer Linearity -0.2 to 3 absorbance unitsAccuracy less than ±1%Tungsten lamp

INCUBATOR : Mixing is available with adjusting speed Microprocessor controlled 96 well microplates Up to 40 deg. C Warm up time not more than 15 min. Air circulation Display Calibration probe at 37 deg C

Timer and temp control

WASHER :Microprocessor controlled

Residual volume < 3 micro liter Single and double aspirate available Memory for 50 wash protocols

Page 2 See next page LCD alpha numeric display Processing time for full cycle less than 1 min 12 and 16 probe manifolds Wash , rinse and waste bottles included Suitable for different type of plates and strips

PRINTER:External Parallel

80 column 2k byte capacity

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY

Lamp qty 5 Standard vessel with 96 wells qty 100





ITEM :32 EMERGENCY BED QTY :7

SPECIFICATIONS :

Length : not less than 2100 mmWidth : not less than 940 mmHeight : adjustable 420 to 800 mm Trendelenburg 26 dig. And reverse 14 dig. 3 section Mattress is includedBack section steplesslyCastors 125 mm with lockingPair of side rails

Infusion rod and holderComplete with all accessories and consumables needed to work completely as specified



ITEM :33 EMERGENCY TROLLY QTY :11

SPECIFICATIONS :BackboardIv pole holderTwo small drawers with partitions One large drawerDefibrillator swing armLockable drawer for dangerous drugs Mobile on 4 castors with break mechanismOxygen tank holderDrawer cassette for top cavity

Complete with :- O2 cylinder complete with regulator flow meter and mask Diagnostic set Laryngoscope Fully catheters all sizes 10 each Ambo bag set silicon infant, child, adult Dressing set (specify) Endotrachial tube all sizes 10 each


are clear in the offer New catalogue is attached with the offer, including data sheet. warranty two years from installation or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the


ITEM :34 FETAL HEART DETECTOR QTY :4

SPECIFICATIONS :Desk top type ,not hand heldDiscrete probeUses pulsed Doppler for unique sound suppression that removes irritating skin/probe noisesAdvanced acoustic engineering sound quality from the built-in loudspeakerThe volume-control A socket is provided for private listening on the non-waterproof unitAdvanced FHR detection techniquesVery low ultrasound exposure levelsThe Fetal Heart Detector is supplied with:4 batteries

Soft BagUltrasound GelOperating HandbookInstruction CardProbeComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Probe





ITEM :35 FETAL HEART MONITOR QTY :4

SPECIFICATIONS :Intrapartum monitorDual ultrasound capability (for twins)Uterine activity (UA)Intrauterine pressure (IUP)NIPB serial port connectionBuilt in printerScreen for us and TOCOUS transducer is includedChart paper 50 packs is included

220v 50/60hzComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- US transducer TOCO transducer Chart paper 50 packs





ITEM :36 HEMODIALYSIS MACHINE QTY :6

SPECIFICATIONS : Modular Design Adult / Pediatric Dialysis Suitable forLow and High Flux dialyzers Dialysis Fluid System:

Dialysate flow range:0/300/500/800 ml/min Push Key, flow OFF” for Ultrafiltration ( sequential Dialysis Selectable Dialysate Temperature 35-39 Deg. C Hydraulic test Once every 12.5 Seconds during dialysis Heat exchanger integrated Dialysate filter exchangeable

Dialysate Sample valve for easy sampling of Dialysate and further testing Conductivity range:12,8 to 15,7 mS/cm Conductivity accuracy and resolution: + 0,1 mS/cm TMP Pressure: -60 to 520 mmHgDialysis Treatment Modes: Bicarbonate or Acetate dialysis Isolated Ultrafiltration program ( sequential dialysis) Sodium and UF Profiles Predefined (1-6) SN –Click –Clack mode Dry Bicarbonate Powder : is standard Feature ( automatically emptied at end of Treatment )Ultrafiltration: UF rate ( selectable) from 0-400 ml/h UF accuracy: 1% UF factor of dialyser: no Limitation , high and low flux range Display parameters: Goal , time ( 0-9:59 h) , Rate ( 0-4 l/h) and VolumeBalancing System : Balancing Chamber 30 ml Closed separates waste from fresh dialysate ( Volumetric and not flow controlled) for accurate weight control and mixing

See next page Page2

Dilution of chemicals : Pre-defined Dilution Ratios To fit Most common used Chemicals Variable dilution ratios ( User programmable )

Arterial Blood Pump : Blood flow range : 15 -600 ml/ min digital display Adjustable Pump segment inner Diameter : 2-10 mm digitalHeparin Pump : standard feature: Administration rate : 0.1- 10 ml Syringe sizes : 20-30-50 ml

Bolus administration : up to 5 ml per bolusCleaning and Disinfection : Various Pre programmed Rinsing and disinfection Protocols dependant on the Chemicals used User defined ( programmable and adjustable rinsing and cleaning programs) Automatic Wake up and rinsing of machine available Hot disinfection at 85 Degrees C program possible Cold disinfection at 37 Degrees C with Program possibleSafety Systems: Venus Pressure Monitor : range -60 to 520 mmhg Arterial Pressure Monitor : range -300 to 280 mmhg Blood Leak detector : Color sensitive detector : sensitivity : 0.5 ml/min ( Hct 25%) Air Detector : Ultrasonic and Capacitive air detector Water Supply: Water inlet Pressure ; 1.5 – 6.0 bar Water inlet Temperature : 5 – 30 Deg. C Water inlet 15-25 um Filter included Water inlet pressure reducing valve integrated

See next pagePage3

power Supply : Main Power : 230-240 VAC , 50 Hz Internal battery backup for extracorporeal blood circulating in power failure (automatic return with power restoration)Service and support :

Integrated Diagnostic Software allows diagnostic and troubleshooting of all sensors , valves , and pumps Integrated Calibration software for sensors and pumps

On line clearance monitor is includedBlood pressure monitor is includedComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY Blood lines Coil Bibag





ITEM :37HEMODIALYSIS CHAIR

QTY :6

SPECIFICATIONS : 4 MOTORS Independent adjustments for Backrest, Seat tilt, seat height and largest adjustment 10 button handset including single button for get in/off Trendelenburg positioning (Shock position). Blood resistant artificial leather, which is resistant to disinfectants too. Easy cleaning. 3 parts chair (seat, back and leg).

Over all length approx. 200cm.Width approx. 60cm.Adjustable height from 50 to 70 cm. approx.

Tren Trendelenburg with back movement up to 90 deg. leg up to 35 deg.Arm rests: width 15-cm approx. Length 60 cm approx.Distance between them is adjustable from 50 to 60 cm approx. with lock.Head pollster is included.Footrest is included.

Remote controlled movements attached to arm rest.4 castors, anti static and lockable.220v, 50hz.Complete with all accessories and consumables needed to work completely as specified

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin and source(clarification certificate ), date of start manufacturing this model , and date of last upgrading , are

clear in the offer New catalogue is attached with the offer, including data sheet. warranty two years from installation extendable for the same down time period during warranty or 30 months from delivery at

least Warranty for not less than 10 years for spare parts. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the


ITEM :38 CBC COUNTER QTY :1

SPECIFICATIONS : Full Automatic

Whole blood mode18 parameter

WBC , RBC , HGB , HCT , PLT , MCV , MCH , MCHC , MPV PDW, RDW, lymphocytes (% and #) Monocytes (% and #), granulocytes (% and #)

Calculated parameters and histogram are availableThroughput around 50 samples/hourAutomatic shut down ,start up ,electronic self checking ,filling and background checkFull Automatic calibrationPrinter is included220 V, 50/60HZOpen System use any standard reagents

Reagent bag and start up kit is includedComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Reagent bag WBC aperture RBC aperture





ITEM :39HEMATOLOGY SLIDE STAINER

QTY :1

SPECIFICATIONS :

Open system hematology slide strainerComputer controlled Applications :peripheral , Bone marrow smears and gram stainCapacity /run : not less than 50 slides/runCycle time: not less than 8 min.Memory up to 10 programsBattery backup220 V/ 50Hz






ITEM:40 HIGH SPEED STERILIZER QTY: 2

SPECIFICATIONS:

Electronic High Speed SterilizerPre and Post vacuum Autoclave23 Liters chamberDigital, microprocessor control panelPressure and temp ControlAll program parameters can set to different temp, pressure and time and stored Automatic fill and sterilization and shut-offStainless steel door with double safety locking device, prevents door opening while chamber pressurized

Pressure and temp. and water alarms, Digital display with safety valveDigital programs: Unwrapped at 134 deg. C, Unwrapped at 121 Deg. C, Wrapped at 134 Deg C, Wrapped at 121 Deg. C (From 3 Min -18 Min STE Time)Steam generated in Jacket around ChamberWater ring pump for pre and post vacuumTwo trays included






ITEM :41 CASSETE TYPE HIGH STEAM STERILIZER QTY :1

SPECIFICATIONS :

Dimensions: 50cmx40cmx20cm approx.Internal cassette dimensions 38cmx18cmx7.5cm approx.Reservoir capacity around 4 liters (distilled water)Around 40 cyclesFull cycle time of sterilization not more than12 minutes Sterilization modes : wrapped , unwrapped , rubber/plastic , heavy duty Sterilized instruments can be held and used immediately after the sterilization cycle is completed.A system that uses clean distilled water for each sterilization cycle. Fully automated operation with advanced microprocessor that controls all functions.Power supply 220V/50Hz.






ITEM :42IV – STAND

QTY :34

SPECIFICATIONS :

Stainless steelAdjustable highFour hock5 Casters

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin New catalogue is attached with the offer

ITEM :43 TRANSFERE TROLLEY QTY :3

SPECIFICATIONS :

Consists of two chasis and one platform.One cahsis for the sterile areas and one for the non-sterile areasTrasfer palrform with mattressBoth chasis are linked together at the transfer pointEach cahsis is produced from welded tabular steelWith chrome plated side railsBumpers at all four cornersAdjustable backrest50mm thickness mattressIV rodOxygen cylinder holderMovable X-Ray cassette holderAntistatic castors 200mmThree position break pedal controls two castors at either end of the trolley allowing free swiveling, breaking or steering lock.Overall dimension: 720x2070 mm approx.Hieght: 885mmAdjustable backrestTrendelenburg

Side railsComplete with all accessories and consumables needed to work completely as specified

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin and source(clarification certificate ), New catalogue is attached with the offer, including data sheet. warranty two years from installation or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the

certificates for evaluation. The equipment must pass the acceptance test of MOH biomedical Engineering unit

ITEM :44X-RAY FILM ID CAMERA

QTY :1

SPECIFICATIONS :

Works in daylightWorks with commercial brands with mechanical windowAdjustable brightness for different filmsUsing regular EDV card with patient data into the camera and sliding the cassette into the slot the rest is done automatically Exposure time : 2 secondsExposure levels: 10Card size ; Standard ID card 82.6x187.5 mm , Smallest card size 82.6x140mm with thickness: 0.2-0.5 mmID filed : EUR size Power supply: 220-240 Volts , 50 Hz






ITEM :45 INCUBATOR LAB QTY :1

SPECIFICATIONS :

Stainless steel 316 L chamberMicroprocessor controlTotal volume 30 LTemp. From room to 80 deg.Spatial deviation at 37°C with electronic controllers ±°CElectronic controller for heating Digital temp displayRated voltage 50/60 Hz 230 VComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Heating element





ITEM :46 INFANT INCUBATOR QTY :6

SPECIFICATIONS :Double wallsVariable heightDouble Temperature control for skin 34-37 and single air modes 20-37 degHumidity control 30% to 99%O2 measurement 21-99%four access doorsAdjustable bed movements and tilt with mattressMore than 2 IV pole are includedSliding out mattress tray, X-rays transparent with X-ray cassette holder with mattress 60 x 40 cm approx.Shelf for monitor is includedMovable on 4 Casters 2 with brakeAlarms : visual and audible for air flow, Skin temperature , Air temperature , sensors failure , Air circulation failure , Power failure with possibility to silence audible alarm Noise level inside < 45 dB.Microprocessor control module Digital displays for air and skin temperatures .lCD Screen :pole mounted mounted on a pole for easy positioning and view angle, 24 hour trend plot for temperature, humidity ,

oxygen concentration level, pulse oximeter, Alarm massages Pulse oximeter Module, with plethysmographic waveform, SpO2 and Pulse Rate with adjustable alarm limits.Oxygen servo control Module (Oxygen monitor)Humidity servo control ModuleIncluding all probes , sensors ,filters Complete with all accessories and consumables needed to work completely as specifiedOPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:-

Temperature air probe Skin air probe Air filter





ITEM :47 INFANT VENTILLATOR QTY :6

SPECIFICATIONS :Application : neonatal , infant , pediatric Mode of operation : AC, SIMV/IMV, CPAP, PEEP Inspiratory time :0.1-3.0 secRate : 2-150 breaths per minuteI:E ratio :4:1 –1:1 controlledExpiratory pressure: 0-20 cm h2oInspiratory pressure:5.0-70 cm h2oOperation: electronic controlledAlarms : High/low inspiratory pressure Low peep/Baseline pressure Apnea High respiratory rate , Electrical loss , Loss of gasDisplay parameters: Inspiratory pressure Peep I:E ratio calculated Mean airway pressure Bar graph for airway pressure Respiratory rate measuredSafety pressure relief valve 15 to 85 cm h2o is includedMixer is includedHumidifier is includedPatient circuit with all filters is included , All sensors are includedComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Reusable patient circuit , Sensors please specify





ITEM :48 INFANT SCALE QTY :2

SPECIFICATIONS :

Electronic scale with a large weighing tray up to 20kg. accurate to 10 gramsInternal damping system compensates for movementsWeight in Kg and Lb. conversionBattery operated or by transformerLoad capacity 20 kg / 44 Lb.Complete with all accessories and consumables needed to work completely as specified





ITEM :49 INFUSION PUMP WITH STAND QTY :49

SPECIFICATIONS :

Open system infusion pumpRate range:1-999ml/hr incrementsVolume to be infused:1-9999ml in 1ml incrementKVO rate: 5ml/hr or current set if less than 5ml/hrOcclusion pressure: 6-8 psiPower: 220v ac 50/60hzBattery: Rechargeable not less than 5hrs operationAlarms: low battery Open door

Occlusion Air in iv tubingIV set :Open systemAccessories: infusion bump stand with counter weightComplete with all accessories and consumables needed to work completely as specified





ITEM :50 INSTRUMENT TROLLY QTY :5

SPECIFICATIONS :

Completely stainless steel 2 shelvesUpper shelf with three side railsOne drawerHand for movement50 mm castorsOne stainless steel bowl is includedDimension 700 * 500 * 770h mm approx.IV stand

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin , New catalogue is attached with the offer.

ITEM :51 SAFETY CABINET QTY :1

SPECIFICATIONS :

External Dimension around 750D x 1300W x 1300HChamber dimension not less than 580D × 1190W × 700HFilter efficiency 99.999 , for particles>0.3 microAir volume 300 m3/hoursAir velocity 0.4 m/secPower 220V, 50HzIncluding HEPA filter Vertical sterile flowWorking chamber steel profilesDeep sink 14x12x6 inch is includedHot and cold water supply Exhaust system is includedGas inlet is includedStand type with baseComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY: -Filter





ITEM :52 CLEAN/DIRTY UTILITY TROLLEY QTY :6

SPECIFICATIONS :

Stainless steelBag is made from canvas and can be removedBumpers are on each corner4 castors :125 mm diameter 2 brakesDimension 1330* 650 * 1040h mm


ITEM :53 LINEN TROLLY DIRTY QTY :6

SPECIFICATIONS :

Made of tubular steel tube and powder paintedBag is made from canvas and can be removedBumpers are on each corner100 mm diameter castors2 brakesDimension 640 * 610 * 1080h mm


ITEM :54 LOCKER QTY :66

SPECIFICATIONS :

Enameled sheet steel frameOne drawerOne cabinetOne steel shelf inside cabinetMobile on 4 castorsDimension 45 *40* 85 h cm approx.

Your offer will not be taken in consideration unless (must be mentioned in the offer) :- Country of origin , New catalogue is attached with the offer.

ITEM :55 MAYO TRAY QTY :3

SPECIFICATIONS :

Stainless steelAdjustable height by foot mechanism4 castors

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin and source(clarification certificate ), New catalogue is attached with the offer, including data sheet.

ITEM : 56 MEDICATION CABINET QTY : 12

SPECIFICATIONS :

Constructed from enamelled sheet steel.Upper section with two lockable glass doors Lock and flat key and two adjustable inox shelvesLower section with two sheet steel locking doors and removable sheet steel shelfKnock down constructionDimensions: (75wx38dx169h) cm


Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin and source(clarification certificate ), New catalogue is attached with the offer, including data sheet. warranty two years from installation or 30 months from delivery at least Warranty for not less than 10 years for spare parts.

ITEM :57 MEDICATION TROLLY QTY :7

SPECIFICATIONS :

1- Made of steel sheet frame and powder painted2- Top compact laminated to prevent from chemicals3- Strong rubber for protection surrounds bottom4- 2 drawers on both sides5- Plexiglas cabinets on each side for medicine 6- Side rails on top7- IV rod height adjustable8- Hand for movement9- 3 baskets attached

4 castors with 2 brakes Dimension 720 * 410 * 1020h mm approx.


ITEM :58 MICROSCOPE QTY :2

SPECIFICATIONS :

Double head microscope Binocular, stable, fine & coarse focus, control on both sides Built in transformer and illuminationObjective lenses x4, x10 & x40 for both headsObjective oil immersion x100Eyepiece lenses x10 (pair) for both heads CondenserIris diaphragmMechanical stage with specimen holderDust coverSpare lamp & fuseLenses paper boxImmersion oil 50 mm 220 V ,50 HzComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Lamp





ITEM :59 MILK STERILIZER QTY :1

SPECIFICATIONS :

Stainless steel bodyCapacity not less than 20 placesTemperature controlled 380 vDrainTimer and buzzer is availableComplete with all accessories and consumables needed to work completely as specified






ITEM :60 MORGUE FOR THREE BODIES QTY :2

SPECIFICATIONS :Capacity : 3 bodies Dimensions: (1000Wx2400Dx2500H) mm Approx.Cooling rate : around 4200 BTU/Hr.Refrigerant : R134 or R22Stainless steel interior and exteriorTemperature monitoring system Alarm for high /low temperatureGalvanized steel three piece tray cartridge and frame Removable one piece polished stainless steel body tray with hand hold at each end100 mm polystyrene insulationSwing doorsLight fixture with pilot switchInstallation Is included





ITEM :61 COMPLETE MONITORING SYSTEM FOR THE HOSPITAL QTY :1

SPECIFICATIONS :

A. MONITORING SYSTEM FOR ICU

1. BED SIDE MONITORS :QTY 3 The monitor uses a modular hardware design which consists of the following separate components: Control unit with data network interfaces Not less than 18 inch flat panel TFT color display Physiological parameter module housing Physiological parameter module(s) Multi-connector peripheral device interface hub Direct-connect hand-held remote control The monitor is capable of displaying 8 waveforms simultaneously in a moving-trace format Each monitor is capable of switching monitoring configuration with a user-accessible software selection. 9 monitors with Adult ICU monitoring configuration and Neonatal ICU monitoring configuration The monitor uses a variety of tones to indicate the severity of an alarm

Sensor fail tones will be different from patient physiological alarm limit violation tones, tone variation indicating severity of alarm for patient physiological alarm.roessing Unit Component:

The monitoring should be capable of supporting all display technologies, CRT, Flat panel Analog and Digital A color display unit provides the user with a selection of color formats in which to display patient data The system uses a single control knob for functional control. The User interface should be via a Remote Key pad or Remote controls. The control should have the major functions to provide quick access to common procedures Touch screen user interface The monitor uses a menu-select format for operation and control. Each monitor has an on-screen, user help/support system : messages, teaching program and troubleshooting assist program

Capability to connect other types of monitors such as ICP,CPP……….etc monitors The module housing is a separate component from the processing unit and display unit. Mounting system: GCX, Variable Height Wall Mounting Kit, vertical and lateral positioning plus tilt/swivel adjustments.

2. MULTI PARAMETER PATIENT DATA MODULE : QTY 3 Can be used for all monitors , transferee monitors and anesthesia monitors Work with batteries during transportation, removable type, not less than 3 operation Hrs. Save the patient records with data before and during transport.

Parameters:- ECG and respiration :

Simultaneous multi-lead ECG (including 12 lead analysis) Respiration Must process incoming ECG data via a simultaneous, multi-lead format for arrhythmia detection During

use at a monitor and during transport Full lead select (I, II, III, aVR, aVL, aVF, and V (V1-V6 when using the ten lead cable) for display. Each monitor simultaneously obtains, at minimum, three ECG leads for QRS detection and arrhythmia recogni Each monitor is equipped with a “smart” lead-fail system. Trace Sweep Speed 50-12-12.5-mm/sec Software basic arrhythmia detection Respiratory signal is obtained through the ECG leads. Trace sweep speed 25, 12.5, 6.25 mm/sec Thoracic impedance plethsmograph Pace maker pulse rejection The user can select Lead I or Lead II for respiratory cycle monitoring and waveform display. The respiration program includes the following features:

Manual and automatic waveform sizing. Auto and manual respiratory cycle threshold detection. The system has adjustable alarm settings for high and low respiration rate and apnea.

ECG trend must be beat-to-beat Defibrillator protection provided Patient leakage current, less than 10uA For adult monitoring, each monitor is supplied 10 lead patient cable For pediatric and neonatal monitoring, each monitor is supplied with a 3-lead patient cable

NIBP :1channel The monitor uses the oscillometric method for pressure determination. Measurement modes include: Manual mode Time interval automatic mode (user-selectable time interval) STAT mode (5 minutes of rapid

measurements) The monitor displays systolic, diastolic, mean values, and time of pressure determination. (In timed auto

mode, display shows time to next reading.) Measurements are tabulated for recall and review. The monitor uses a dual-hose cuff configuration capable of accommodating adult, pediatric, and neonate

cuff sizes. Hose is included for each monitor Three sizes (infant , child and adult ) cuffs are included for each monitor

Invasive blood pressure : 2channels

The monitor should be capable of displaying the waveforms at different speeds The monitor can monitor up to four invasive blood pressures. The user can label the monitored pressures on the display. Labels include: ART, PA, CVP, ICP, LA, SP

(special), FEM, UAC, UVC, and RA. The pressure waveform display includes a user-adjustable cursor. The monitor automatically measures the PAW. CPP (cerebral perfusion pressure) is displayed in the ICP window when both a mean arterial pressure and

ICP are monitored. Alarm Limit Adjust high and low limit Numeric update rate ; every 3- second Zero : Auto zero Trunk cable reusable qty 2 and 10 disposable transducers complete withal all accessories

Temp : 2- Channel Measurement Range : 0 to 50oC Numeric up to date Rate: every 3 sec. Alarm limit adjustable high and low limits Displays parameters, temp (single probe attended), T1, T2, and delta temp, ∆T , (two probes attached) 2 Oral and skin probe should be delivered

Pulse oximetry : 1 Channel The monitor can measure oxygen saturation using pulse oximetry. Measuring using Masimon or Nelcor probe and algorithm The module offers compatibility with two or more probe manufacturers. The user can select the SpO2 waveform for display. The monitor displays an O2 saturation value and a pulse The SpO2 program includes the following features: High and low alarm limits for O2 saturation Automatic

waveform sizing

Signal strength indicator Displayed messages include: Interference detected, low light, check probe, low signal quality, probe off

patient, replace probe. Display update: 2 sec. And numeric up date rates every 2 sec. Probe for adult, probe for pediatric and for neonatal and extension cable should be delivered

Each module stores, in its integral memory, data trends for all monitored parameters. Data trends are for the most recent 24-hour period. The monitor should be able to interface to up to eight bedside devices, (for example ventilators) via a multi interface device. The monitor should provide trending, alarm information for interfaced device.

B-BED SIDE MONITORS : QTY 3

1. MONITORS: Same as A-1 but not less than 12 inch monitor2. MULTI PARAMETER PATIENT DATA MODULE : Same as A-2

C- TRANSFERE MONITORS : QTY 3 1. MONITORS :

Can be hooked to patient transfer trolley Can be used with same A-2 multi parameter module LCD display not less than 10 inch with resolution 640*480 Battery operated with run time not less than 3 Hrs Alarms : visual and audible

2. MULTI PARAMETER PATIENT DATA MODULE : Same as A-2

D- PORTABLE MONITOR :QTY 11

1. MONITORS : Same as C-1 and C-2 Stand with counter weight included

E- ANESTHESIA MONITOR :QTY 3

1. MONITORS :Same as B-1 with extra module(s) for anesthesia 2. MULTI PARAMETER PATIENT DATA MODULE : Same as A-2 3. ANESTHESIA MODULE(S) :Anesthetic agents (Halothane, Enflurane, Isoflurane, Sevoflurane, Desflurane) , N2O, CO2 , O2 With all accessories needed for anesthesia module with calibration kit for gases , water trap , Sampling tubes not less than 100 ,and other accessories needed.


Multi parameter module A-2 Adult 10 lead ECG patient cable pediatric and neonatal 3-lead ECG patient cable NIBP Hose Three sizes (infant , child and adult ) cuffs IPB Trunk cable reusable , and 10 disposable transducers complete withal all accessories Oral and skin temp. probe Spo2 Probe for adult, probe for pediatric and for neonatal and extension cable Co2 sensor Co2 Main stream and sidestream adaptors ICG cable with 4 sensors EEG cable and electrodes


are clear in the offer New catalogue is attached with the offer, including data sheet. warranty two years from installation or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Prices for all mentioned accessories and spares. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the

certificates for evaluation service training for one MOH Engineer in the manufacturer The equipment must pass the acceptance test of MOH biomedical Engineering unit

ITEM :62 OPEN INCUBATOR QTY :2

SPECIFICATIONS :Mobile on 4 castors with break mechanismMicroprocessor control for temperatureAudible and visual alarms for temperature (low and high) sensor , power failure with alarm silence featureDisplay for skin and control temperaturesTiltable warmer head to easy use of mobile x- rayExamination lamp included Removable sides for easy access to babyBasinet trendelenburg ±15ºat least Washable and hypoallergenic mattress includedOxygen and suction outletsWith x-ray cassette trayMonitor shelf and holder are included2 drawers are includedLateral rail for accessories is includedHandles for movement Including:-Temperature sensorOxygen flowmeter with humidifier Suction complete (regulator ,safety bottle , collection bottle and tubing)IV pole Complete with all accessories and consumables needed to work completely as specifiedOPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:-

Probes please specifyYour offer will not be taken in consideration unless (must be mentioned in the offer):-

Country of origin and source(clarification certificate ), date of start manufacturing this model , and date of last upgrading , are clear in the offer

New catalogue is attached with the offer, including data sheet. warranty two years from installation extendable for the same down time period during warranty or 30 months from



ITEM : 63 OPERATING LAMP QTY :2

SPECIFICATIONS :

LED Surgical Light Ceiling mounted, dual head set ( one main and one satellite)

Multi-lens matrix Without warm upAdjustable Color Temperature: 3500-5000k color rendition index remain constant: around Ra 95Unlimited Angle rotationManual focus working distance via sterile handle Endo-light 120cm approxConstant colour temperature in all dimming levels Wide dimming range: 5%-100%

Low heat emission <2 ۫ CAdjustable high, swiveling armShadow correction Adjustable size of light field Control functions by Sterile knob Synchronization of functions between light headsMain light head:Five cells with control panel at the head lightMain light intensity: 160,000 Lux.Main field : 20-30 cmSatellite light head:Three cells with control panel at the head light Satellite light intensity: 120,000 lux.Satellite field : 20-30 cm

Installation is included


OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- LED

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin and source(clarification certificate ), date of start manufacturing this model , and date of last upgrading , are clear in the offer New catalogue is attached with the offer, including data sheet. warranty two years from installation extendable for the same down time period during warranty or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Prices for all mentioned accessories and spares. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the certificates for evaluation The equipment must pass the acceptance test of MOH biomedical Engineering unit.

ITEM :64 OPERATING MINOR LAMP QTY : 1

SPECIFICATIONS :

Multi lens systemsingle switch able lampColor Temperature 4.300kUnlimited Angle rotationManual focus working distanceMounted ceilingLight adjustable both for intensity and focus.Heat filter is included.Adjustable high, swiveling armTransformer for armMain light intensity: 120,000 Lux.Main field : 20-30 cmInstallation is included


OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Lamp





ITEM :65 OPERATING TABLE QTY :3

SPECIFICATIONS :

Electrical with remote control4 sections.Trendelenbrge : +30/-25 deg.Length not less than 1800mmWidth with side rails not less than 540mmAdjustable High from 760 to 1000 mm approx.Tilt: 18 degBack section: +60/-40 deg.Leg section: +20 /-90 deg.Mattress is includedBridge is Included or renal positionRail setting clamp 2Anesthesia screenIV stand4 Castors with brakeComplete with all accessories and consumables needed to work completely as specified





ITEM :66 OVERBED TABLE QTY :66

SPECIFICATIONS :

Chrome plated steel tubeTiltable plastic topAdjustable height from 75 to 120 cmMounted on 3 swivel castorsKnock down construction


ITEM :67 LCD PROJECTOR QTY :1

SPECIFICATIONS :Maximum power 400 Wa

PortableContrast Ratio: 1000:1 Around 1200 ANSI lumenshigh brightness and uniformity in ambient room light.Resolution: not less than 1024 x 768 PixelsNot less than 24-bit (16.7M colors)Quick Change LensColor Management Systemallows for individual adjustment of lightness, chroma and hue for red, green, blue, cyan, yellow and magenta Variable Audio OutputRemote control's response not less than 7m.





ITEM :68 OXYGEN FLOWMETER COMPLETE QTY :98

SPECIFICATIONS :

Wall mounted typeDIN type connectorHumidifier is includedMask and tube are includedNasal tube is includedFrom 0 to 10 l/min


certificates for evaluation.

ITEM :69 PATIENT BED QTY :66

SPECIFICATIONS :

Semi fowler hospital bedBackrest operation gas springVariable height, foot-controlled Operated individual raise and lower pedals on both sides of the bedStable two-way tilt system with four points of support, between 12 degrees foot-up and 6 degrees foot downBraking security, at either side of the bed locking three braking castors Length 2200mm approx.Width: 1000mm approx.Height: Range: 420mm to 800mm approx.Complete with all accessories and consumables needed to work completely as specified



ITEM :70 PATIENT CHART TROLLEY QTY :4

SPECIFICATIONS :

With slotted rack for medical records chartsMobile on 4 castors with brakesWith under shelfWith drawerWith fold-up side shelfComplete with (10) record chart holder metalicApproximative dimensions H 120cm x L 75cm x W 50cm


ITEM :71 PATIENT COUCH QTY :9

SPECIFICATIONS :

Chromium-plated rectangular steel tube frame 3-section mattresshead section adjustable up to +40 ْ leg section up to +28 ْDimension 1950 * 650 * 650h mm approx.Paper roll holder is includedPaper roll 500mm wide is includedComplete with all accessories and consumables needed to work completely as specified


ITEM :72 PATIENT TROLLY QTY :3

SPECIFICATIONS :

Length approx. 200 cmWidth approx. 70 cmHeight approx. 80 cmMatters is includedSide rails are includedIV stand is included4 casters with breakTrendelenberg is available (foot 10 deg. down to 12deg. up, head up to 70deg.)X-ray grid is included


ITEM :73 PHARMACY REFRIGERATOR QTY :1

SPECIFICATIONS :Overall dimension around 180h*60d*180hTemperature from 4 to 8 deg.Alarm for power fail , over temperature, under temperature ,door open2glass doorsinternal lightDigital display for temp.ChartInside fansComplete with all accessories and consumables needed to work completely as specified





ITEM :74 PHOTOTHERAPY UNIT QTY :3

SPECIFICATIONS :

Phototherapy Unit for neonate treatmentTilting headFour large-lasting fluorescent bulbsBulb-fan which lower the temperature of the fluorescentOn /off switch for all or half lampsWidth: 75cm Approx.Depth : 80cm Approx.Height Adjustable. 100cm to 140cm approx.Mobile on 4 castors with break mechanism 6 spare lamps includedComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Phototherapy blue lamps





ITEM :75PLASTER TABLE WITH EXTENTION

QTY :1

SPECIFICATIONS : 1-extention and plaster table:

Over all length 200cm approx. Over all width 60cm approx. Height adjustment 60-90cm approx. 4 Castors with brake Trendelenburg / reverse Trendelenburg 200/200 Back section up 750 Leg section up/down 300/450

Lower limbs traction device complete with:1. pair dynamometers2. pair popliteus 3. pair ankle leather cuffs for adults and children

Including the following accessories :1. IV Pole 4 hocks 2. Side rails 3. Foot support 4. Mesh basket 5. Oxygen bottle holder6. X-Ray cassette holder 7. Body strap 8. Scapula supports for adults and children;9. Pelvis support with counter traction rod, for adults and children;10. Trunk holder arch, complete with leather belt11. Chin leather support with traction device.

2- Bandage trolley: gypsum bandage trolley with six drawers Dimensions: 900W*850H*580D mm approx. Extensible plate: 500*600 mm approx. Including :waste bin, holder gypsum basin s/s steel Handles

4 castors with brakeComplete with all accessories and consumables needed to work completely as specifiedYour offer will not be taken in consideration unless (must be mentioned in the offer):-

Country of origin and source(clarification certificate ), date of start manufacturing this model , and date of last upgrading , are clear in the offer New catalogue is attached with the offer, including data sheet. warranty two years from installation or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the certificates for evaluation. service training for one MOH Engineer in the manufacturer

ITEM :76MOBILE X-RAY

QTY :1

SPECIFICATIONS :

Generator :- 100 kHz High frequency generator - Microprocssor controlled- 30 kW - 120 kV - 420 mA- Capacitor discharge- Digital display : kV, mAs, sec- 40 Anatomical programmes- mA range : 140 - 420 Ma- kV range : 40 to 120 kV by 1 kV steps- mAs range : 0,2 to 200 mAs - Exposure time : 1,3 ms. to 1 s.

Tube :- Rotating anode X-Ray tube 3000 rpm- Focus : 0,6 - 1,3 mm- Anode heat storage capacity : 107 kHU- Housing thermal capacity : 500 kHU- Manual collimator with light bean cantering- Housing heating capacity : 500 kHU- Manual collimator with light bean cantering

Stand :- Lateral Arm rotation : +/- 90°- Arm rotation around main axis : 90°/60°

- Arm rotation around main axis (up/down) : +60°/-77°- Collimator rotation : +/-90°- Focus-floor height : 47 to 200 cm- Cassette storage compartment for up to 4 sets of 36x43 cm cassettes

Traveling manual drive Single phase

Complete with all accessories and consumables needed to work completely as specified Your offer will not be taken in consideration unless (must be mentioned in the offer):-





ITEM :77 PULSE OXIMETER WITH NIBP QTY :8

SPECIFICATIONS :- Portable Spo2/NIBP- Adult/Infant Operation- Spo2 range:1-99%- Accuracy :2-3%- Resolution :1%- Pulse Rate Range :20-300BPM- Pressure range: 30 –300 mmHg adult , 20-150 mmHg neonate- Resolution :1mmHg , Accuracy :+/-2%- Automatic measurement cycle adjustable- Alarm: Low Spo2, high Spo2, Low Pulse, high Pulse, Low pressure ,and high pressure- Alarm Silence :Available- Memory :24hrs data storage- Power: 220 V AC 50/60HZ- Battery : more than 5 hrs lead acid- Digital display for Spo2 , heart rate and pressure- Adult and infant Spo2 finger probes are included- NIBP cuff and hose are included for adult and child

Mobile Stand with counter weight includedComplete with all accessories and consumables needed to work completely as specifiedOPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:-

Spo2 finger probe Neonatal spo2 probe Adult NIBP cuff and hose Infant NIBP cuff and hose





ITEM :78 PULSE OXIMETER QTY :8

SPECIFICATIONS :- Table top and not hand held type- Nellcor or Masimo probe and algorithm - Spo2 range 0-100%- Accuracy 2-3%- Resolution 1%- Pulse Rate Range 20-255BPM- Relative perfusion index measurement: display range 0.01 to 9.99 ,resolution 0.01 - Adult/Infant Operation

- Alarm: Low Spo2, high Spo2, Low Pulse, and high Pulse.- Alarm Silence: Available- Memory: up to 36hrs data storage- Power: 220 V AC 50/60HZ- battery life: up to 24 hrs- Display: Numeric & Graphicincluding :-

- Probe Adult 2- Probe Infant 2

Mobile Stand with counter weight includedComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:--Probe Adult -Probe Infant





ITEM :79 LAB REFRIGERATOR QTY :1

SPECIFICATIONS :Capacity :not less than 450 lUpright typeGalvanized steel exterior with resistance enemal finishGlass door Illumination inside5 shelves adjustable at leastCfc free refrigerant Uniform cabinet temp.Adjustable temp. Range form 2-14 cºTemp. Stability 1deg.Digital control with displayInternal blower coils Automatic condensate evaporator2 inch polyurethan insulation






ITEM :80 SIDE LAMP QTY :18

SPECIFICATIONS :

Compact light head.Halogen bulb.Light intensity 11,000 Lux. at leastColor temperature 3,700K approx.Mains power 220 volt,50/60HZIncluding transformerMobile on 4 castorsComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:-

LampYour offer will not be taken in consideration unless (must be mentioned in the offer):-





ITEM :81 SLIDE PROJECTOR QTY :1

SPECIFICATIONS :1300 lumens with EXR lamp Accepts 2 x 2 inch slides in standard 80 and 140 circular slide trays Precise horizontal and vertical slide registration Forward and reverse at control panel and with remote control Manual focus at control panel and with remote control Two-position lamp operation (LO, HI) Lamp module with two lamps, auto switching at burnout Easy access to lamp module for quick lamp changes Standby switch ('sleep' mode) Random slide access via remote control or computer Lamp failure indicator light Zero position indicator Built-in dissolve feature (0-10 sec) Single projector soft fade feature RS-232 serial connector for computer communication Accepts both rack-mount and spiral lenses Dark screen shutter eliminates light on screen when no slide Spiral turn elevating foot (up to 10 degrees elevation)

Rear leveling adjustment foot





ITEM :82 SPHYGMOMANOMETER PORTABLE QTY :10

SPECIFICATIONS :Mobile with StandStand With 4 Castors MercuryIncluding cuff and tubesIncluding basket

ITEM :83 SPHYGMOMANOMETER RAIL TYPE QTY :11

SPECIFICATIONS :

Rail type (CLAMP)MercuryIncluding cuff and tubesIncluding basket

ITEM :84 SPHYGMOMANOMETER WALL TYPE QTY :7

SPECIFICATIONS :

Wall typeMercuryIncluding cuff and tubesIncluding basket

ITEM: 85 SPECTROPHOTOMETER QTY :1

SPECIFICATIONS:

Monochromatic by inferential filters spectrophotometerRange 340nm- 700nmAbsorption Rate –0.200 to 2.200AAvailable filters : 340/405/420/505/546/578/670 2empty positionBandwidth 10nmHalogen lamp light sourceMonochromatic and Dichromatic readingSample temperature control 23 deg to 40 deg steps of 1 degBuilt in thermal printerLCD displayProgrammable up to 70 TestsCalculation Modes: Absorption, concentration End point with factor or standard Enzyme kinetics Differential mode Fixed time Polygonal Multi Standard Complete with all accessories and consumables needed to work completely as specified OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:-

4 rolls of printer paper Lamp


are clear in the offer New catalogue is attached with the offer, including data sheet. warranty two years from installation extendable for the same down time period during warranty or 30 months from delivery

at least Warranty for not less than 10 years for spare parts. Prices for all mentioned accessories and spares. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the


ITEM :86 STETHOSCOPE QTY :18

SPECIFICATIONS :

Chrome-plated. Dual-head chest piece48 mm chest-piece has white diaphragmComplete with 2 spare ear tips and a spare diaphragm.

ITEM :87 STRITCHER QTY :3

SPECIFICATIONS :

Over all length and width around 200 X 70cmHigh adjustable from 70 to 80 cmSide rails includedCasters with central lock and steering IV pole includedFowler 0-90 ْEasy to use in AmbulanceTerndelenburg 12 ْ-7 ْBumpers : PVC

ITEM :88 SUCTION COMPLETE QTY :98

SPECIFICATIONS :

Wall mounted typeDIN type connectorSafety bottleCollection bottle All tubes are includedVacuum gage is included

ITEM :89SUCTION MOBILE

QTY :11

SPECIFICATIONS :Front panel with transported handle2 Jars, 2Lt. Each at leastMobile with 4 CastersNoise level : less than 50 dB Operating time: continuous operationAir flow rate of pump: around 35L/min Power: 220V/50HzFilters and tubes are includedVacuum adjustmentVacuum gauge is includedComplete with all accessories and consumables needed to work completely as specified





ITEM :90SYRINGE PUMP

QTY :14

SPECIFICATIONS :Open system (use any syringe)Syringe sizes : 10,20,30, and 50ml Flow rate range: 0.1-200 ml/hr in 0.1ml incrementsAccuracy: Drive accuracy: within + 2%Total volume display:0.1 –999.9ml (resettle in 0.1 ml increments)Alarms: Occlusion, low battery, near empty end, syringes disengagedDigital display for rate ,total infused target and alarmsBattery: Rechargeable, more than 4 hrs life timeUnits : ml/hr ,mg/hr , mg/kg/hr220 V/50HzMobile Stand with counter weight included






ITEM :91AUTOCLAVE TABLE TOP

QTY :6

SPECIFICATIONS :

Electrical control full automatic cycleCapacity: Not Less Than 30 litter stainless steel chamberPrograms: all program parameters can be altered and stored Power req.: 220v, 50hzAudible and visual alert upon cycle interruption and completionDouble safety locking deviceOverheating protectionTwo trays are includedPressure and temperature controlled and monitoredPressure and temperature alarmsDigital displaySafety valve is included







ITEM :92 MAINTINANCE TOOL KIT QTY :3

SPECIFICATIONS :1. Case 2. Tape measure3. Flashlight4. Hammer 100grm5. Level6. Mirror, Inspection7. Knife, Retractable8. Drill bit Set 1-13mm9. Magnetic pick-up tool10. Socket set inch.11. Socket set metric 900As/c 1012. Wrenches combination metric 7mm-19 / 6mm-2213. Ignition wrenches 5mm-12/6mm-1714. Hex key set ballpoint 1.5mm-10mm15. Hex key set inch16. Scissors 1127+1128+1128 A+B+C17. Pliers long nose 2cices 1166mq / 1168mq18. Pliers, side cut 2cices 1082+1188mq19. Pliers, vise grip20. Pliers, retaining ring21. Punch set22. Wrench, Adjustable 6”23. Wrench, Adjustable 10”24. Wire stripper

25. Screwdriver, Regular set of 626. Screw driver, Phillips set of 527. Brushes set 3فراشي28. Wrench, Ridged adjustable set of 3 1”+2”+3”29. Anti static tool kit30. Solder iron31. Solder sucker32. Drill, elect. L.R.33. Angel grinder, Elect. 4.5”34. DM meter , Fluke 1235.

ITEM :93 INFANT TRANSPORT INCUBATOR QTY :1

SPECIFICATIONS :Servo controlled Air/Baby modesDouble wall hoodTemperature control for skin 34-38 and air modes 20-38.5 degO2 measurement 21-99%Skin temp. probe is includedDouble door and opening from both sidesAdjustable bed movements and tilt with mattressDigital DisplaysBuilt in batteries and mains chargerWith collapsible stand for ambulance loadingWith o2 cylinder with proper flowmeterO2 cylinder holderWith adapter cable for 12 volt automatic supplyIV pole is included4 Casters with brakeSet of air filters min 20 is includedAlarms for air flow, probes, high temp, low temp power failureNoise level inside < 45 dB.Complete with all accessories and consumables needed to work completely as specifiedOPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:-

Temperature air probe Skin air probe Air filter





ITEM :94 TUBE SEALING MACHINE QTY :1

SPECIFICATIONS :

Automatic trigger sealing machineSealing time not more than 1.5 secUp to 6.5 mm tubes Indication lamps for power sealing and readyNo warm up period needed220V,50 Hz





ITEM :95

TUBE SHAKERQTY :1

SPECIFICATIONS:

Capacity 20 tubes Adjustable mixing angle from 0 to 90 deg Constant speed of 20rpm Choice of tube holders to hold a number of different sized tubes Simple on/off control switch Spillage tray is included

Holder is includedElectrical supply 230v, 50hz





ITEM :96 ULTRASOUND QTY :2

SPECIFICATIONS :B/M scanScanning methods : Linear Array electronic Convex array electronicDisplay and Monitor : 12” monitor with display B mode, B DUAL mode, M mode B+M mode, ZoomFrequency : 3.5 MHz – 8MHZB-mode scan :Max depth 20cm

Max frames 25 : Max scanning lines around 175 linesM –mode scan : Single channel

Scroll speed 1,2,4,8 sec/screenGain : 60-100db in2db stepsSTG : 6 steps from 0-18 cmMemory capacity : not less than 60 framesDisplay characters :hospital name , Id information , date ,frequency, Frame rate , gain processing , measured values

Image reversal :lift-right , up-downConnectors : 2 probe connectors, VCR , printer ,foot switch ,videoMeasurements B-MODE :distance ,area ,histogram , profile ,angle , Circumference, volume, cross distance, parallel distance

M-MODE: distance, time, slope, M-Hr, Obstetric calculations: OB , application to twin , trend Include the following : 3.5 probe , Printer B/W , Paper for printer10 rolls , Ultrasound jell 5 tubesComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- 3.5 probe Printer B/W Paper for printer 10 rolls Ultrasound jell 5 tubes

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin and source(clarification certificate ), date of start manufacturing this model , and date of last upgrading , are clear in the

offer New catalogue is attached with the offer, including data sheet. warranty two years from installation extendable for the same down time period during warranty or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Prices for all mentioned accessories and spares. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the certificates for

evaluation. The equipment must pass the acceptance test of MOH biomedical Engineering unit. Service training for one MOH engineer in the manufacturer

ITEM :97 ULTRASONIC NEBULIZER QTY :10

SPECIFICATIONS :Desk Type Nebulization : 0.4-0.7 ml/minMax. Cup capacity : 8mlParticles :1-5 micronOscillating frequency: 2.4 MHz approx.LCD display for time , and air flow On/off buttonIncluding mouth piece , tubes , filters , masks for infant and pediatrics220v/50hzComplete with all accessories and consumables needed to work completely as specified





ITEM :98 U.P.S. 6KVA QTY :2

SPECIFICATIONS :

Single phase6kVAInput : 220volt / 50hzOut put: 220volt / 50hzOn line U.P.S.regulation input voltage 10 – 15%Back up time at full load 10-15min.Zero delay time





ITEM :99 VACUUM EXTRACTOR QTY :3

SPECIFICATIONS :

Compact vacuum extractor for obstetric in gynecology High air-flow rate, and high vacuum Maintenance free diaphragm-type pump Vacuum is controlled by the built-in regulating valve and the pedal regulator Air-flow rate of pump19 ± 1 L/min Max. vacuum approx. 93kPa (0,93 bar 700mmHg) Collection jars: 5L glass or polysulphone jars Suction tubes: Included Operating time:>120 min without switch off at nominal voltage All sizes of cups are included (specify) Foot switch is included






ITEM :100VENTILLATOR MACHINE

QTY :3

SPECIFICATIONS :Adults pediatrics and neonates ventilator , works with central supply or compressorMedical air compressor is included( for 4 units)Movable on castors with brakesType of breath and modes of ventilationControl mandatory ventilation(CMV )Synchronized intermittent mandatory ventilation(SIMV)Spontaneous ventilation ( SPONT)Volume targeted ventilation (VTP)Volume support (VS)Volume based breaths (V-CMV , V-SIMV )Pressure based breaths ( P-CMV , P-SIMV , PS)Pressure regulated volume control (PRVC-CMV ,PRVC-SIMV)Apnea ventilation (Backup ventilation) in all modes.Tidal volume: 5ml – 3000ml Respiratory rate : 1-150 bpmFlow : 1-180 l/minPeak inspiratory pressure :0-60 mBarInspiratory time : 0.1-10secI.E Ratio : 1:99 to 4:1PEEP/CPAP : 0-60 mbarFiO2 : 21%-100%ultrasonic nebulizer : user defined duration 1 min to continuous user defined freq

oxygen concentraion and volume compensatedLeak compensation feature is includedLCD not less than 10 inch graphical user interface is included :- 3 waves and 2 loops simultaneously , 2 trends in addition to all parameters

Displayed parameters: Pressure values (Ppeak , PEEP, Pmean , Pplateau) Volume/flow values (Vte , Exp.Min.Vol , Spon. Min. vol. ,Leak rate ) Time values (resp. rate , Tins , Ti/Ttot , RR/Vt , spont ) Oxygen concentraion 21-100% Curves : Pressure/Time Flow/Time Volume/Time Loops : Pressure/Volume Flow / VolumeAlarms audible and visual :- pressure (low and high), apnea, CPAP (low), low battery , loss of supply , with alarm silence Battery backup for not less than 1 hr Include the following accessories :Built in Mixer Servo Humidifier for adult Servo Humidifier for infant/neonate Patient circuit reusable for adult with heating wires ,water trap and all filters Patient circuits reusable for infant/neonate with heating wires ,water trap and all filters All sensors (O2,Flow ,…..etc) Holder for patient circuit Supply hoses DIN type Lungs , silicon , 3 sizes Maintenance kit Complete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Patient circuit reusable for adult with heating wires ,water trap and all filters Patient circuits reusable for infant/neonate with heating wires ,water trap and all filters All sensors (O2,Flow ,…..etc) Maintenance kit




certificates for evaluation service training for one MOH Engineer in the manufacturer The equipment must pass the acceptance test of MOH biomedical Engineering unit Service training for one MOH engineer in the manufacturer

ITEM :101VORTEX MIXER

QTY :1

SPECIFICATIONS: Variable speed control between 200 and 2500rpm Continuous touch mode

Cast body Orbit diameter 4.2mmElectrical supply 240v, 50hz





ITEM :102 WARMING MATRESS QTY :4

SPECIFICATIONS :

Adjustable TemperatureCirculation pumpDigital Display for temp.DrainWater filterBlanket is included220V/50Hz power req.Alarm for High temperatureComplete with all accessories and consumables needed to work completely as specified





ITEM :103 WATER BATH QTY :1

SPECIFICATIONS :

Analogue with polypropylene tank ambient to 90oC, 10 liter tank capacity Graduated thermostat in 5oC divisions from 20-90oCHeating time 40 minutesHeater power: 0.75 kWTank Dim: 410x240x80 (LxWxD) Approx.Complete with all accessories and consumables needed to work completely as specified






ITEM :104 WHEEL CHAIR ADULT QTY :6

SPECIFICATIONS :

Solid constructionUpholstered armrestsDetachable folding foot platesSeat width 43 cmSeat depth 42 cmBack tiers 33-cm rad.Front tiers 19-cm rad.Complete with all accessories and consumables needed to work completely as specified





ITEM :105 WHEEL CHAIR CHILD QTY :4

SPECIFICATIONS :

Solid constructionUpholstered armrestsDetachable folding foot platesSeat width 34 cmSeat depth 33 cmBack tiers 57-cm rad.Front tiers 21-cm rad.Complete with all accessories and consumables needed to work completely as specified





ITEM :106 X-RAY C-ARM MACHINE QTY :1

SPECIFICATIONS :Generator

- High Frequency 20KHz- Voltage from 40 to 110 kV- Max. current in radiography not less than 6.5 mA current incontinuous fluoroscopy not less than 3mA

X-Ray Tube- Stationary Anode- Nominal focal – spot size 0.6-1.5 mm- Heat storage capacity 40KHU

Exposures Modes -Continuous fluoroscopy

- Automatic brightness control (kV-mA)- Nominal focal-spot size 0.6 mm.- KVp range 40 - 110 kV- mA range 0.2 - 4 mA

2- Pulsed fluoroscopy: - Nominal focal- spot size 0.6 mm.

- KVp range 40 - 110 kV- mA range 0.2 -4mA

3- Snap Shot- Nominal focal – spot size 0.6 mm- KVp range 40 - 110 kV

- mA range 0.5 -6.5 mAGrid for Fluoroscopy

- ratio 8:1Lines/cm. 36Radiography with Radiographic cassette :

- kV & mAs selection- Nominal focal-spot size 1.5mm- KVp range 40 - 110 kV

mAs range 1 - 250 mAs

SEE NEXT PAGE PAGE1

ITEM : X-RAY C-ARM MACHINE (page 2) QTY :

-Cassette Holder

- 24x30 cm. Adjustable radiographic cassette holderTV Chain

- TV Camera with CCD sensor- 360 rotation of the CCD camera with automatic return to zero- Horizontal image inversion

Image intensifier- Hi-Res. input phosphor screen- Three Fields 9”/6”/4”- Storage Facilities- 1+12 frames memory- 5800 frames Hard Disk (2Gb)- snap shot- subtraction in memory images- positive-negative- text edition- left/right inversion- alphanumerical keyboard

TV Monitors: Two 17" TV monitorsOPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:-

x-ray cassettes 3





ITEM :108AUTOMATIC FILM PROCESSOR

QTY :1

SPECIFICATIONS :

Film transfer system: Facing roller continuous transfer systemProcessing Film size: Approx. 4”x5” to 14”x17”Developing rate: 90 sec./pcProcessing capacity : 220 films/h

Processing temp.: Development 35C in the washing waterReplenishment Incorporate with a replenishment pump for area replenishment by infrared sensorTemp. control system: Non contact control with thermistor and semiconductorTank capacity: Developer 10 Lt., Fixer 10 Lt., Washing 10 Lt.Agitation system: Circulation system by circulation pumpEffluent recovery: PossibleWashing water consumption: 2 Lt./m or lessFilm insertion detecting system : Infrared sensor systemComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY: Developer filter insert





ITEM :109 X- RAY FILM STORAGE CABINET QTY :1

SPECIFICATIONS :

Floor mounted cabinetWooden structureDouble doorSwiveling internal compartment with self closing binsPartitioned for all sizes of x-ray films one partition for each size


ITEM :110 RADIOGRAPHY SYSTEM QTY :1

SPECIFICATIONS :Table:

floating toptop at least 240 x 75cmfloor mounted column with longitudinal and + 90 rotationcontrol handle with laser pointer for centeringmanual collimator

Bucky device:with oscillating gridsuitable for cassettes 13 x 18cm to 35 x 43cm in both directions

Generator:output in kW not less than 60kw. (650 mA at 100kv)computer controlled and high frequency

X-ray tube:17/50kw1.2/1.8 focal spots40kv-150kvnormal speed ~3000rpmnot less than250 KHUbucky frame with oscillating gridready to accept ionization chamber

All necessary interconnecting cables including high voltage cables and all installation material required for the system to operate properly.ATTACHED THE SCHEMATIC FOR ROOMComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY: x-ray tube

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin and source(clarification certificate ), date of start manufacturing this model , and date of last upgrading , are clear in the

offer New catalogue is attached with the offer, including data sheet. warranty two years from installation extendable for the same down time period during warranty or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Prices for all mentioned accessories and spares. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the certificates for

evaluation. The equipment must pass the acceptance test of MOH biomedical Engineering unit. Service training for one MOH engineer in the manufacturer

ITEM :111 X- RAY VIEWER QTY :24

SPECIFICATIONS :

2part viewers.(Double)Power 220 V, 50/60 HZFluorescent light

Your offer will not be taken in consideration unless (must be mentioned in the offer)-: Country of origin New catalogue is attached with the offer

ITEM :112 X-RAY DIGITAL FLOUROSCOPY QTY :1

SPECIFICATIONS :X-Ray digital fluoroscopy with the following features Generator :- Not less than 50 Kw , microprocessor controlled converter type generator.Automatic Kv/mA CONTROL During fluoroscopy.AEC with not less than 4 measuring ionization champers and tomo density control.Tube voltage: 40-150 Kv.Tube current: 0.1-1000 mA. Exposure time : 0.4ms-4sWith tube overload protection and main voltage compensation.Tube:-Double focus 0.6/1.2Rotational anode with speed not less than 9000 rpmAnode heat storage capacity not less than 600 KHUMax. heat dissipation not less than 300 WWith tube overload protection.Image intensifier :-3 mode 6,9,12 inch image intensifier spatial resolution not less than 4.0 lp/mm for the max modeCamera :- CCD camera with H/V scan reverse1024x 512 matrixAutomatic dose controlAutomatic gain controlHigh contrast and spacial resolutionBand width 9 MHzDigital output 8 bitWith last image holdCollimator :- Motor drivenWith automatic and manual operationAuto calibrationPatient table :-Patient weight max. :not less than 150 KgDimensions: 220x70x95h approx.Lateral movement : not less than 20 cm with speed of 4 cm/sTilt 90º/15ºBucky unit cassette sizes from 18x24 to 35x43 with automatic size sensing

Grid 36 l/cm with ratio 1:12SID : 110 cmColumn :-Transverse: movement: not less than 150 cm.Angulations : -35º to 35ºSID: 110cmRotation off x-ray tube : around vertical axis -90º to 90º , around horizontal axis: -180º to 180ºWall stand:-Vertical bucky for radiographyVertical movement : 150 cm with lock-in positionTilt: -20ºto 90ºWith grid 36l/cm oscillatingCassette sizes form 13x18 to 35x43Monitors :17 " monochromeAmbient light dependent contrast and brightness control.

ATTACHED THE LANDSCAPE FOR ROOM

Complete with all accessories and consumables needed to work completely as specifiedYour offer will not be taken in consideration unless (must be mentioned in the offer):-




certificates for evaluation The equipment must pass the acceptance test of MOH biomedical Engineering unit

ITEM :113 ORTHOPAEDIC DRILL AND SAW QTY :1

SPECIFICATIONS :1. Rotary dual hand piece forward and reverse for drilling and reaming with trigger adjustable speed

Battery operated Complete with the following :-

Jacobs chuck drill Synthes chuck drill Drill hudson modified trinkle drill Jacobs reamer attachment Synthes reamer attachment Adjustable pin collect wire Drill bit different sizes (1.6 ,2, 2.8 ,3.2 ,4 , 4.8, 6.3 ) or near sizes Reamer quick locking device Different sizes of reamers to chose from ( 40,42,44,46,48,50,52,54,56,58,60,62,64 mm )or near sizes price each size seperate Krischner wire (round , double point and threaded 8 different sizes and shape ,price each separate )

2. Sigital saw handpiece include the following Large bone oscillating saw blades (2different sizes price each sepertly) Large bone knee blades (2 different sizes price each seperetly) Large bone graft harvesting blades (2 different sizes price each seperetly) Large bone acl blades (2 different sizes price each seperetly) Micro sagittal saw blades (2 different sizes price each seperetly)

3. Reciprocating saw handpiece include the following Large bone reciprocating saw blades ( 7 different sizes and shapes specify and price seperetly)

4. Battery back qty. 25. Battery charger

6.Sterilizing caseOPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:-

Drill bit different sizes Sigital saw blades Reciprocating saw blades

Your offer will not be taken in consideration unless (must be mentioned in the offer):- Country of origin and source(clarification certificate ), date of start manufacturing this model , and date of last upgrading , are clear in the offer New catalogue is attached with the offer, including data sheet. warranty two years from installation extendable for the same down time period during warranty or 30 months from delivery at least Warranty for not less than 10 years for spare parts. Prices for all mentioned accessories and spares. Service and operation manuals original and copy (2 sets in English) are included Certificates (agency approvals ) :FDA , TUV,CSA,UTRL,CE will be taken into consideration ,the offer must include the certificates for

evaluation The equipment must pass the acceptance test of MOH biomedical Engineering unit.

ITEM :114Mortuary Table

QTY :1

SPECIFICATIONS : Stainless steel construction.Over all dimensions: 220x 75 x 90 cm approxLoad :not less than 200kgDeep table top:10 cm approx Drain.



ITEM :115PNEUMATIC TORNIQUATE

QTY :1

SPECIFICATIONS :

AutomaticDual cuffWith precise regulation valveOperated by compressed air with manual override ohio system connectorCan be operated by bulbDigital timerTwo pressure gagesMobile stand with basket is includedAll cuffs for adult , child and infant are includedComplete with all accessories and consumables needed to work completely as specified

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Cuff adult Cuff infant Cuff child




certificates for evaluation

CSSD EQUIPMENT

ITEM :116 AUTOCLAVE, LARGE SIZE W/STEAM GENERATOR QTY :2

SPECIFICATIONS :

Capacity : not less than 600 LSingle horizontal sliding doorAll pipes and fittings are of stainless steel and bronzeAll valves are ball type2 rails in the chamberFree standing cabinetBuilt in printer for documentation 121 and 134 programsControl : By microprocessorSterilizing : By high pressure steamCycle display : LEDTemperature display: DigitalProtection: Interlocked doorSteam boiler: IncludedMaterial: Chamber door and jacket : Heavy duty stainless steelBasket includedTrolley includedComplete with all accessories and consumables needed to work completely as specifiedOPTIONAL ACCESSORIES TO BE PRICED SEPARATELY :-

Heating element





ITEM :117CSSD TROLLEY

QTY :2

SPECIFICATIONS :

For transportation of sterile containers and bagsCompletely made of AISI 304 Stainless steel4 Castors 200mm, 2 fixed and 2 swivel with brakes2 Winged doors with anti dust liningDimensions: 1100x 700x 1300 (WxDxH)approx.Stainless steel push handleKey lockingCorner bumpersCapacity: 9 containers 300x600x300h1/2 central shelves for depositing sterile containers



certificates for evaluation.

ITEM :118 TABLE TOP GAS STERILIZER QTY :1

SPECIFICATIONS :

Low temp gas sterilizerUse Ethylene Oxide gas ampoules Less than 20 grams of ETO/cycleWithout vacuum or water injectionSterilization and aeration in the same cabinetInterior dimension 50*35*35 cm approx.220v/50hzIncluding the exhaust Installation is includedComplete with all accessories and consumables needed to work completely as specified





ITEM :119 SEALING MACHINE QTY :1

SPECIFICATIONS :

Sealing steam length 250 mmSealing steam width 8 mmMain voltage 220v , 50 HzElectronically controlled welding timeCutting device is includedTemperature adjustmentDetachable tableFoot switch






ITEM :120 WASHER DISINFECTOR QTY :1

SPECIFICATIONS :

Washer DisinfectorSteam condenserWater softner built inDrying with hot air98% DOP air filterNr. 2 dosing pumpsStainless steel box for chemical products 300 mm sizeOverall size: L 90 xP 63x H 84 cm approx.

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:1 Standard lower basket

2 Standard upper basket with washing arm3 Vertical instrument basket





Component number 2

ITEM :121 COMPLETE LAUNDRY EQUIPMENTS FOR THE HOSPITALSPECIFICATIONS :

1-IRONING PRESS: QTY 1WITH BUILT IN STEAM GENERATOR

WITH BUILT IN vacuum connectionSteam working pressure 5 barAir working pressure 7 barInclude foot switchOver all dimensions 140 * 100 * 140 cm approx

400V/ 50 Hz / 3 phaseWith Air compressor:

Oil freeCapacity 175 l/min at 7 barSingle stageTwo cylinder piston compressorReceiver is included 24 liter capacity

2- LAUNDRY TROLLEY: QTY 1Made of light alloy metal sheetRolled top edge for safetyStefining ribsPerforated sides4Solid rubber castor wheels 2 fixed and 2 swivelSize : 1330x730x870mm approx

3-TUMBLE DRYER: QTY 2Capacity :25KgDrying process: Tumbling stainless steel drum typeElectrically Operated : 380V, 50HzDrum volume: 500LDrum diameter :Approx. 1100mmWith temperature selectorFull view glass doorMicroprocessor controlInstallation included all fittings, parts------etc

4-WASHER EXTRACTOR: QTY 2Capacity: Approx. 35kgFunction: Washing and de wateringElectrical OperatedWashing speed: Approx. 500rpmG force: At least 133ATTACHED THE SITE PLAN FOR LAUNDRYEQUIPMENTS DISTRIBUTION ON SITE PLAN SHOULD BE INCLUDED IN THE OFFER

OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY One set Heating Element for washer extractor





ITEM :122 COMPLETE KITCHEN EQUIPMENTS FOR THE HOSPITALSPECIFICATIONS :1- BOILING PAN:QTY 160 litersLPG gas operation

Direct heat304 stainless steel Insulated heat exchangerAutomatic ignition systemSolid state control for temperature with ± 1 deg precisionControl for low water safetylED indicators for heat cycle and low water warning Power ON/OFF switchSupport legs with level adjusting Safety valve included

2- CONVECTION OVEN:QTY 1Double Deck Convection OvenInterior Dimension :min. (700*600*700mm W*H*D) Solid state digital controlTemperature (max) 280 approx.Mechanical timerUser programmableAuto cool down feature by fan motor variable speedElectronic ignition with automatic safety shutoff featureNatural gas Stainless steel front ,sides ,top and legsDouble wall thermal glass windowsInertial lightningPorcelain enameled oven interior with coved corners 12 chrome racks

3- WATER COOLER:QTY 1Stainless steel enclosure Stainless steel reservoir Adjustable cold water thermostatUniversal non–spill systemStainless steel hot water reservoir On/off switch and safety reset buttonOverall all dimensions. 30x30x130 cm approx.

4- DEEP FAT FRYER:QTY 1Natural gas operatedStainless steel front ,sides and backAdjustable legsCapacity: 2 * 15 L approx.

Heavy gauge stainless steel fry-potTwin chrome wire basketsBuilt in pressure regulatorPiezo spark ignition with constant burning With safety pilotStainless steel fry-pot coverWith optional stainless steel fish plateDrain shelves are included

5- GAS GRILL:QTY 1steel burners with self stabilizing flame Dimensions W800 D700 H850 mm Approx.Inlet gas: natural gas each ½ module has a separate control for the burner with a flame failure deviceMachine has height adjustment mechanism minimum 50mmStainless steel front ,side and rear panelsLarge pull –out excess fat containerHas right –angled side edges The grid is suitable on two sides, the first side, sloped with drainage channel

6-FOOD SERVICE TROLLEY:QTY 5Capacity: 20 trays of 160*220 mm min.Stainless steel construction4 swivel castors 6 inch diam. with braking mechanismDouble wall s/s swiveling doors with insulationHeavy duty bumpers12 gauge s/s hinges 1 inch diam. s/s push handle mounted Floor drain is includedOverall dimension: 1600H*750D*1600W mm approx

7-GAS RANGE:QTY 112” griddle, 8 burners gas rangeIncludes two 26” approx. wide standard ovens. All stainless steel front, sides, high shelf, and riser. Heavy gauge welded frame construction. 6” stainless steel heavy duty landing ledge. 12”x 12” sectioned cast iron top grates. Each range top burner is 32,000 BTU rated with lift-off heads for easy cleaning. Each oven burner (1 per oven) is 35,000 BTU rated. Includes porcelain oven interior for easy cleaning, pull-off stainless steel door and 1 chrome plated rack per oven.

Oven has 100% safety gas shut-off pilot. Each burner includes matchless push button ignition to light standing pilot. Includes 6” chrome plated steel legs. Oven dimensions -- 26”W x 22”D x 13”H. approx. Overall dimensions -- 60”W x 20”D x 56”H approx.

8-ICE MAKER:QTY 1cube Ice Capacity not less than 75KG/24HR.Water filter for tap water is included.Full Automatic220V, power supplyWorking on tap water supplyAlarms for no water, no powerIsolated storage system not less than 35kgOver load relayHigh/Low pressure relays for safety (switches of when low pressure)Works with a wide range of water temperatureDrain

9-MEAT MINCER: QTY 1Table topConstructed from 304 AISI stainless steelClosed type motor, self-ventilatedEquipped with thermal cut-out Motor unit with special steel helical gears operating in a crankcase with oil additivesThe motor gear units are from 304 AISI stainless steel support with rubber feetTow rotation speeds, controlled by a switch that is also the ON/OFF switchFunction on three phrase electrical supply Cone attachment for rapid insertion of the interchangeable attachments with a locking device and safety micro switchMeat mincer- body in aluminum alloy; scroll in anodized aluminum alloy mounted on self-lubricating bearings; stainless steel conveyor hopperElectrical power 2.2KWSupply voltage 400V/50Hz

10- REFRIGERATOR ROOM: QTY 1A. Freezer room:Supply , installed ,test and commission (freezer-room) for meat, requirement

temp.(-16/-20)C as standard ,the prices include all works required to complete the unit work as described as specification and supervision engineers requirements.

dim. Of room (2.22 *2 *2.5)m , including: -10 cm insulation walls as standard (poletan)

-10 cm insulation above ground (polystyrene density 40 kg/cbm gladded with 1mm galvanized steel ) then tiles. -cladding 0.8mm stainless steel indoor layer

-refrigerator door with heavy duty hinges and lock with internal safety release -refrigerator door with hand , switches , insulation and all accessories as standard qty 1

-with plastic strip curtains in door ways -3.5 hp compressor / R134A or R407 , semi-hermetic Copland qty 1

-condensing and evaporator unit qty 1 -fans Ф40 cm

-expansion valves qty 1 -liquid receiver qty1

-oil separator qty 1 -electrical panel 3 ph with phase failure , timer , alarms , all controls qty1

-sight glass and filter qty 1 -high and low pressure switch qty 1 -solenoid valve , flow regulator qty 1

-base plate qty 1 -5/8 flex connection

-1 1/8 "suction accumulator -Electrical thermostat, electronic tem. Gages drain ,digital sensors

-automatic defrosting -electrical panel with lighting units , circuit breakers , switches , wiring and all electrical works needed to complete the system.

B. Refrigerator room: Supply , installed ,test and commission (Refrigerator room)

Temp. (0-4)C for vegetables as standard, the prices include all works required to complete the unit work as described as specification and supervision engineers requirements.dim. Of room (2.22 *2 *2.5)m , including:

-10 cm insulation walls as standard (poletan) -10 cm insulation above ground (polystyrene density 40 kg/cbm gladded with 1mm galvanized steel) then tiles.

-cladding 0.8mm stainless steel inside layer -refrigerator door with heavy duty hinges and lock with internal safety release

-refrigerator door with hand , switches , insulation and all accessories as standard qty 1 -with plastic strip curtains in door ways

-3 hp compressor / R134A or R407 , semi-hermetic Copland qty 1 -condensing and evaporator unit qty 1

-fans Ф40 cm -expansion valves qty 1

-liquid receiver qty1 -oil separator qty 1

-electrical panel 3 ph with phase failure , timer , alarms , all controls qty1 -sight glass and filter qty 1

-high and low pressure switch qty 1 -solenoid valve , flow regulator qty 1

-base plate qty 1 -5/8 flex connection

-1 1/8 "suction accumulator -Electrical thermostat, electronic tem. Gages drain ,digital sensors

-automatic defrosting -electrical panel with lighting units , circuit breakers , switches , wiring and all electrical works needed to complete the system.

C REFRIGERATORInternal and external structure in 304 AISI stainless steel, external base, top and back in galvanized steel Digital control panel allowing the easy and precise setting and control of the internal temperatureCompletely automatic defrosting and automatic evaporation of defrost water Rounded internal comers of the cabinet and easily removable runners and grids Operating temperature min/max : 0/10 CºOperating mode : ventilatedInternal dimensions in mm: 600W *665D*1480H approx.Min/max internal humidity 85 %No and type of door :1, fullDoor hinges: right sideNo of grids (included) :3Refrigerant type : R134aRefrigerant power 244 WPower 0.37 kW2 S/S side runners qty. 3Grid qty 3Forced air cooling system High-density expanded polyurethane insulating foam, 60mm in thickness with cyclopenthane injection Reversible self-closing door, in positions less than 90º, with a stop at 95º and a maximum opening at 180º, equipped with a magnetic door seal to guarantee perfect closure. lock and key and micro switch to switch of the fan when the door is openedStainless steel feet (plastic interior)CFC and HCFC free

11-MIXER:QTY 1Capacity : 20L bowlVariable speed: 100-370 rpm approx.Floor mounted type½ horse power motor

Complete with : stainless steel bowl swing ring safety guard from both sides ingredient chute batter beater and wire whipExtra blade is included

12-POTATO PEELER: QTY 1 10 kg capacityStainless Steel constructionCorrosion resistant coverPrecision timer Extended discharge chute ,stop splashing Quick lock doorConnector to sink tapSilent double V belt drive 1/3 hp AC motorOperates on drain boardSingle phase , 220V/50HzBuilt in grease cup Body dimension: 570 mm high * 320mm dia. Approx.

13-SLICING MACHINE: QTY 1Heavy duty model suitable for large volume catering establishments and food production facilities1/3 hp motor capacitor chrome plated bladeBlade speed 250 rpm approx.blade diam. 250mmcarriage : manual operationhardened steel with polished anodized aluminum finishbuilt in sharpener and meat holderSafety guard and incorporates all current safety features plus plastic blade guard for blade when removed for cleaning.Blade removal tool for safe blade cleaningMax. product cut in mm :150 W x 220 L X 15 ThicknessAdditional blade is included

14-VEGETABLE SLICER/SHREDDER: QTY 1Heavy duty model suitable for large volume catering establishments and food production facilitiesShaft speed 700 rpm approx.5 discs

9 inch S shape vegetable slicer1 inch wide poly -V beltFront leg extension for counter weightHousing is stain finish anodized aluminum with hinged feed chute doorRocker type double pole ON/OFF switch with keyIncluding:Latch and feed pusher9 inch S knife Qty 2Plate holder (hub and shaft)Shredder plate 3/32Shredder plate 1/2Shredder plate 3/16Shredder plate 5/16Julienne plate

15- WORK TOP BENCH WITH UPSTAND: QTY 1In 304 AISI stainless steel, 10/10 in thicknessSquare section legs and 1”Height-adjustable feet (40mm) in 304 AISI stainless steel 2 drawers, in 304 AISI stainless steel with a one-piece interior and rounded corners , maximum load capacity of 40 kgThe lower shelf, 40mm in thickness, slots easily into place at a height of 200 mm from the floor External Dimensions in mm Width :1800 Depth :700 Height :1000Worktop Thickness in mm : 50Up stand Dimensions In mm Height : 100 Depth : 13 Radius : R=8

16- WORK TOP BENCH WITH BOWL: QTY 1304 AISI stainless steelExternal dimensions- mm:-Width 1800Depth 700Height 1000Worktop thickness-mm 50Up stand dimension mm :-Height 100

Depth 15Radius R=8Bowl dimensions 400x400xh200 mm Square section legs height-adjustable feet (40m) in 304 AISI stainless steel to allwoThe single-pressed bowl is supplied with an overflow pipe and drain holeA chest of 4 drawers 600mm wide 304 AISI stainless steel includedLower shelf includedWater mixer is included

17- MEAT PROCESSING TABLES: QTY 1304 AISI stainless steel External dimensions in mm:-Width 1200Depth 700Height 1000Worktop thickness 50 mmUp stand dimensions in mm :-Height 100Depth 15Radius R=8Square section legsHeight-adjustable feet (40 mm) A ploythene cutting board (340 x 640 x 25mm) includedLiquid container attached to table top includedknife holder attached to table top included S/S 60-Litre mobile bin with lid is included

18-VEGETABLE PROCESSING TABLES: QTY 1304 AISI stainless steel with bowlExternal dimensions in mm:-Width 1800Depth 700Height 1000Worktop thickness 50 mmUp stand dimensions in mm (designed to be used against a wall) :-Height 100Depth 15Radius R=8Bowl Dimensions :1670x320xh180

Square section legs 304 AISI stainlessHeight-adjustable feet (40 mm) S/S 60-Litre mobile bin with lid is includedOperated mixer tap is included

19- SOAKING SINK: QTY 1304 AISI stainless steel, with overflow rim along the topOne bowlBowl and the pan washing support are constructed entirely in 304 AISI stainless steelThe bowls are supplied with an overflow pipe with filter and a drain holeThe bowls have bases which are inclined towards the drain outlets and rounded internal comers for ease of draining and cleaningRear splash back with 8mm rounded corner, 100mm in height and 13mm deepSquare section legs with 1” Height-adjustable (40mm) feetExternal dimensions in mm:-Width 1200 Depth 700Height 1000Worktop thickness:50 mmUp stand dimensions in mm:-Height 100Depth 15Radius R=8Bowl dimensions in mm:1080x540x350hOperated mixer is included

20-COMBINATION SHELVES UNIT: QTY 2Consist of 2 unitsEach unit consist of 4 tiersThe shelves are constructed entirely in 304 AISI stainless steel with a scotch brite finishAll panel edges are upturned to guarantee the safety of the kitchen worker The shelves are supported by two pairs of side uprights.Easy to modify the layout of the shelves line or cornerExternal dimensions-mm for unitWidth 1600Depth 400Height 1800Max loading weight 150kg

21- CRANE: QTY 1304 Stainless steel tower mounted scaleLarge LED displayKeyboard and push button tareOver and under function for check weighingPrinter outputDual presetsAuto shut-offCapacity not less than 100 KgPound/Kg conversionAdjustable height from 75 -100 cm230 V/ 50Hz

ATTACHED THE SITE PLAN FOR KITCHEN EQUIPMENTS DISTRIBUTION ON SITE PLAN SHOULD BE INCLUDED IN THE OFFER


OPTIONAL ACCESSORIES TO BE PRICED SEPARATELY:- Blade for slice machine Knife and plates for vegetable slicer/shredder

ITEM :1 · Web viewThe monitor is capable of displaying 8 waveforms simultaneously in a...

Documents

Transcript of ITEM :1 · Web viewThe monitor is capable of displaying 8 waveforms simultaneously in a...