It’s So Simple, It’s Elmdor....14" x 14" ( 356x ) 1 8.25 (3.74) 30" x 48" (76 2x 19) 5 42.00...
Transcript of It’s So Simple, It’s Elmdor....14" x 14" ( 356x ) 1 8.25 (3.74) 30" x 48" (76 2x 19) 5 42.00...
SUBMITTAL FIELD REFERENCE BOOK
It’s So Simple,It’s Elmdor.
PW Series
SMD SeriesAT Series
SLA Series
EDI Series
DWB Series
2 3
QUICK REFERENCE SHEET
Series Fire Rated
Roof Mount/Hatch
On Pipes
Wall Mount
Ceiling Mount
Duct Mount
Exterior Mount
High Vandal Resistance
PageNo.
1100 • 35ADW • • 4AI • • 5AP • 6AT • • 7ATWT • • 8CFR • 9DT • 10DW (14 Gage) • 11DW (16 Gage • 12DWB • 13ED • • • 14EDI • • 15FR • • 16FRC • • 17GD • • 18GDT • 19GFG • 20HF • 21ML • 22ODD • 23PW • 24RAH • 37RAH-CM • 38S009/S010 • 25SF • 26SLA • • 27SLK • 28SMD • • 29SVB • 32VB • 33WSR • • 30TSP-1 • 40
Access Doors ........................................................................................................ 3-30Valve Boxes ......................................................................................................... 31-33Roof Pipe Flashing .............................................................................................. 34-35Roof Hatches ....................................................................................................... 36-38Options ................................................................................................................ 39-43
3
1
2 4
53
2"
NOMINAL SIZE + 1-5/8"
W
H
A A
1
2 4
53
2"
NOMINAL SIZE + 1-5/8"
W
H
A A
ACCESS DOORS
5
Suffix Options❏ - AKL Allen Key Latch
- CL❏ Cylinder Lock (one per door)❑ - CLD Cylinder Lock with Dust Shutter
(one per door)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER❏ ADW Dry Wall Aluminum Access Door
ACCESS DOORS: ADW Series
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
Revised: 10/26/16ADW
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDO R/STO NE MAN • TE L : (8 0 0 ) 591- 9181 • (626) 968- 8699 • F AX : (626) 333-4109 • www.e lmdors toneman . com
NOMINAL SIZE A B C D E F LATCHES12" x 12" (305 x 305) 12.00" (305) 12.00" (305) 14.20" (360) 14.20" (360) 12.20" (310) 12.20" (310) 116" x 16" (406 x 406) 16.00" (406) 16.00" (406) 18.20" (462) 18.20" (462) 16.20" (411) 16.20" (411) 118" x 18" (457 x 457) 18.00" (457) 18.00" (457) 20.20" (513) 20.20" (513) 18.20" (460) 18.20" (460) 124" x 24" (610 x 610) 24.00 " (610) 24.00" (610) 26.20" (665) 26.20" (665) 24.20" (614) 24.20" (614) 124" x 36" (610 x 914) 36.00" (914) 24.00" (610) 26.20" (665) 38.20" (665) 24.20" (610) 36.20" (919) 2
NOTES:1. CONCEALED HINGE2. DOOR WITH DRYWALL INSERTED3. FRAME4. CONCEALED TOUCH LATCHES5. SAFETY CHAIN
(FOR DOORS 12” x 12” OR BIGGER)D
E
F
58" [15]
112" [36]
34" [19] 1" [25] TYP.
1
2
C B
A
3
1
4
5
NOTE: HINGE SHOULD BE ON THEBOTTOM WHEN INSTALLED IN A WALL
4
5
ACCESS DOORS: AI Series
Revised: 10/25/16AI
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/S TONEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 333- 4109 • w w w .e lmd ors tonema n . c om
Suffix Options❏ - AKL Allen Key Latch
- CL❏ Cylinder Lock (one per door) ❑ - CLD Cylinder Lock with Dust Shutter
(one per door)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER❏ AI Lightweight Aluminum Access Door
AI 8" x 8" 8-5/8" x 8-5/8" 1 2.0 lbs.AI 10" x 10" 10-5/8" x 10-5/8" 1 2.5 lbs.AI 12" x 12" 12-5/8" x 12-5/8" 1 3.0 lbs.AI 14" x 14" . 14-5/8" x 14-5/8" 1 4.0 lbs.AI 18" x 18" 18-5/8" x 18-5/8" 1 5.0 lbs.AI 24" x 24" 24-5/8" x 24-5/8" 1 8.0 lbs.AI 24" x 36" 24-5/8" x 36-5/8" 2 11.0 lbs.AI 24" x 48" 24-5/8" x 48-5/8" 2 14.0 lbs.AI 30" x 30" . 30-5/8" x 30-5/8" 2 11.0 lbs.AI 36" x 36" 36-5/8" x 36-5/8" 2 14.5 lbs.AI 36" x 48" 36-5/8" x 48-5/8" 2 18.25 lbs.
NOMINAL DOOR SIZE(W x H) LATCHES WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
2"Typ.
114"
3
5
4
2
3
1
6
7
W
H
NOMINAL SIZE + 1-34"
NOMINAL SIZE+
1-34"
5. MOUNTING SLOTS
NOTES:1. CONCEALED HINGE2. DOOR3. FRAME4. SCREWDRIVER OPERATED CAM LATCH
6. INSULATION TYPE 3 EPS THERMAL BOARD7. CLOSED CELL NEOPRENE GASKETING
WALL OPENING
6 7
Revised: 04/27/18
Suffix Optionsq -AKL Allen Key Latchq -CL Cylinder Lock (one per door)q -CLD Cylinder Lock with Dust Shutter
(one per door)q -SS Stainless Steel Construction
(Type 304 No. 4 Satin Finish)
AP
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERq AP Acoustical Plaster Access Door
SIDE VIEW FRONT VIEW
ACCESS DOORS: AP Series
AP 12" x 12" 12-1/4" x 12-1/4" 1 7 lbs.
AP 12" x 24" 12-1/4" x 24-1/4" 2 13.5 lbs.
AP 18" x 18" 18-1/4" x 18-1/4" 2 14 lbs.
AP 24" x 24" 24-1/4" x 24-1/4" 4 20.5 lbs.
AP 24" x 36" 24-1/4" x 36-1/4" 5 24.5 lbs.
NOMINALDOOR SIZE(W X H)
CEILING OPENING(minimum required) LATCHES WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STON EMA N • T EL : (8 0 0 ) 591-9181 • (626) 968-8699 • F AX : (626) 333-4109 • www.e lmdors toneman . com
7
q -CLD Cylinder Lock with Dust Shutterq -CL Cylinder Lock (one per door)q -GB Galvanized Drywall Bead
(one per door)
Suffix Optionsq -AKL Allen Key Latch
q -SS Stainless Steel Construction (Type 304 No. 4 Satin Finish)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERq AT Acoustical Tile Access Door
FRONT VIEWSIDE VIEW
ACCESS DOORS: AT Series
AT 24" x 24" 24-1/8" x 24-1/8" 4 16 lbs.
AT 16" x 16" 16-1/8" x 16-1/8" 2 8.5 lbs.
AT 24" x 36" 24-1/8" x 36-1/8" 5 24.5 lbs.
AT 18" x 18" 18-1/8" x 18-1/8" 2 10 lbs.
AT 8" x 8" 8-1/8" x 8-1/8" 1 4 lbs.
AT 12" x 12" 12-1/8" x 12-1/8" 1 5.5 lbs.
AT 12" x 24" 12-1/8" x 24-1/8" 2 9.5 lbs.
NOMINALDOOR SIZE(W X H)
CEILING OPENING(minimum required) LATCHES WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
Revised: 05/10/18AT
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
EL MD OR/STONEMAN • TEL : (800) 5 9 1 -9 1 8 1 • (6 2 6 ) 9 6 8 -8 6 9 9 • F AX : (6 2 6 ) 333-4109 • www.e lm d ors tonem an . com
8 9
Suffix Optionso -AKL Allen Key Latcho -CL Cylinder Locko -FFI 1” (25mm) Foil Faced Insulationo -MAS Masonry Anchor Straps Attachedo -MLP Mortise Lock Prepo -NLH Non-Locking, Two-Position Handle
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERo ATWT Airtight/Watertight Door
ACCESS DOORS: ATWT Series
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
03/02/16ATWT
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
EL MDOR/STONEMAN • TEL : (800) 59 1 -9 1 8 1 • (6 2 6 ) 9 6 8 -8 6 9 9 • FAX : (6 2 6 ) 333-4109 • www.e lmdors toneman . com
WALL OPENING (W x H)
INCHES (mm)
LOCK
QTY
WEIGHT
lbs (kg)
WALL OPENING (W x H)
INCHES (mm)
LOCK
QTY
WEIGHT
lbs (kg)
8" x 8" (203 x 203) 1 4.25 (1.92) 24" x 48" (610 x 1219) 3 35.00 (15.87)
10" x 10" (254 x 254) 1 5.25 (2.38) 30" x 30" (762 x 762) 4 26.75 (12.13)
12" x 12" (305 x 305) 1 6.75 (3.06) 30" x 36" (762 x 914) 4 31.00 (14.06)
14" x 14" (356 x 356) 1 8.25 (3.74) 30" x 48" (762 x 1219) 5 42.00 (19.05)
16" x 16" (406 x 406) 1 10.00 (4.53) 30" x 60" (762 x 1524) 5 50.00 (22.68)
18" x 18" (457 x 457) 1 12.00 (5.44) 36" x 36" (914 x 914) 4 36.00 (16.32)
20" x 20" (508 x 508) 1 14.00 (6.35) 36" x 48" (914 x 1219) 5 48.00 (21.77)
24" x 24" (610 x 610) 2 18.50 (8.39) 36" x 60" (914 x 1524) 5 58.00 (26.30)
24" x 36" (610 x 914) 2 26.00 (11.79) 36" x 78" (914 x 1981) 5 75.00 (34.02)
NOTES:
1. CONTINUOUS PIANO HINGE2. DOOR3. FRAME4. SCREWDRIVER OPERATED CYLINDER LATCH5. 3/16" x 3/8" SLOTTED MOUNTING HOLES6. 1/8" x 1/2" GASKET
3
H
W
1 2 45
OPENING
WOOD STUD STEEL STUD
6
A A
134
"
SECTION A-ANOT TO SCALE
9
Allen Key LatchCylinder Lock (one per door)
❑ -SS Stainless Steel Construction (Type 304 No. 4 Satin Finish)
Suffix Options ❑ -AKL ❑ -CL❑ -CLD Cylinder Lock with Dust Shutter
(one per door)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER❑ CFR Ceiling Fire Resistant Access Door
SIDE VIEW FRONT VIEW
ACCESS DOORS: CFR Series
CFR 12" x 12" 10-1/2" x 10-1/2" 1 7.3 lbs.CFR 18" x 18" 16-1/2" x 16-1/2" 2 12.5 lbs.CFR 24" x 24" 22-1/2" x 22-1/2" 2 21.8 lbs.CFR 22" x 30" 20-1/2" x 28-1/2" 4 26.0 lbs.
NOMINALDOOR SIZE(W X H) CEILING OPENING LATCHES WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
Revised: 10/25/16CFR
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
EL MDOR/STONEMAN • TEL : (800) 5 9 1 -9 1 8 1 • ( 6 2 6 ) 9 6 8 -8 6 9 9 • F A X : ( 6 2 6 ) 333-4109 • www. e l mdors toneman . com
10 11
-CNH Cam Latch-Non HingedSuffix OptionsMODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERDT Duct Access Door
SIDE VIEW FRONT VIEW
ACCESS DOORS: DT Series
DT 6" x 6" 4-3/4" x 4-3/4" 1 1.5 lbs.
DT 8" x 8" 6-3/4" x 6-3/4" 1 2.5 lbs.
DT 10" x 10" 8-3/4" x 8-3/4" 1 3 lbs.
DT 12" x 12" 10-3/4" x 10-3/4" 1 4 lbs.
DT 14" x 14" 12-3/4" x 12-3/4" 2 5 lbs.
DT 16" x 16" 14-3/4" x 14-3/4" 2 7 lbs.
DT 18" x 18" 16-3/4" x 16-3/4" 2 8 lbs.
DT 20" x 20" 18-3/4" x 18-3/4" 2 11 lbs.
DT 24" x 24" 22-3/4" x 22-3/4" 2 13 lbs.
NOMINALDOOR SIZE(W X H) DUCT OPENING
CAMLATCHES WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
Revised: 3/24/09DT
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.
roftisivesaelPmost current speci�cations. © Copyright 2009Elmdor/Stoneman, City of Industry, CA,A Division of Acorn Engineering Company.
www.elmdorstoneman.com
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________
Company________________________________________________________________Date___________________
Contact_________________________________________________Title____________________________________
Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STONEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX: (626) 333-4109 • www.e lmdors toneman .co m
11
Suffix Optionso - AKL Allen Key Latcho - CL Cylinder Lock (one per door)
o - MAS Masonry Anchor Strapso - SS Stainless Steel Construction
(Type 304 No. 4 Satin Finish)o - TH 'T' Handle
q - CLD Cylinder Lock with Dust Shutter(one per door)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERo DW Dry Wall Access Door (14 Gage Steel)
ACCESS DOORS: DW Series 14 Gage
Revised: 04/27/18DW14
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMD O R/STO NEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 3 3 3 - 4 1 0 9 • www.e lmdor s ton eman . c om
Notes:1. Concealed Continuous Piano Hinge2. Door3. 2” U-Frame4. Screwdriver operated latch5. Mounting holes
1
2 4
5
32"
NOMINAL SIZE + 1-5/8"
W
H
FRONT VIEW
SECTION VIEW
A A
NOMINAL
DOOR SIZE
(W X H) WALL OPENING LATCHES WEIGHT
DW 6" x 6" 6-1/2" x 6-1/2" 1 3 lbs.
DW 8" x 8" 8-1/2" x 8-1/2" 1 3 lbs.
DW 8" x 12" 8-1/2" x 12-1/2" 1 4 lbs.
DW 10" x 10" 10-1/2" x 10-1/2" 1 4 lbs.
DW 12" x 12" 12-1/2" x 12-1/2" 1 5.5 lbs.
DW 12" x 16" 12-1/2" x 16-1/2" 1 6 lbs.
DW 12" x 18" 12-1/2" x 18-1/2" 2 6.5 lbs.
DW 12" x 24" 12-1/2" x 24-1/2" 3 9.5 lbs.
DW 14" x 14" 14-1/2" x 14-1/2" 1 6 lbs.
DW 14" x 20" 14-1/2" x 20-1/2" 3 8 lbs.
DW 14" x 24" 14-1/2" x 24-1/2" 3 15 lbs.
DW 15" x 15" 15-1/2" x 15-1/2" 1 6.5 lbs.
DW 16" x 16" 16-1/2" x 16-1/2" 1 7.5 lbs.
DW 16" x 20" 16-1/2" x 20-1/2" 3 8.5 lbs.
DW 16" x 24" 16-1/2" x 24-1/2" 3 10 lbs.
DW 18" x 18" 18-1/2" x 18-1/2" 3 9 lbs.
DW 18" x 24" 18-1/2" x 24-1/2" 5 12 lbs.
DW 18" x 36" 18-1/2" x 36-1/2" 6 16 lbs.
DW 20" x 20" 20-1/2" x 20-1/2" 3 11 lbs.
DW 20" x 24" 20-1/2" x 24-1/2" 5 13 lbs.
DW 20" x 30" 20-1/2" x 30-1/2" 5 15 lbs.
DW 22" x 22" 22-1/2" x 22-1/2" 3 12 lbs.
DW 22" x 30" 22-1/2" x 30-1/2" 5 16 lbs.
DW 22" x 36" 22-1/2" x 36-1/2" 6 22 lbs.
DW 24" x 24" 24-1/2" x 24-1/2" 3 15 lbs.
DW 24" x 30" 24-1/2" x 30-1/2" 5 17 lbs.
DW 24" x 36" 24-1/2" x 36-1/2" 6 20.5 lbs.
DW 24" x 48" 24-1/2" x 48-1/2" 7 28 lbs.
DW 30" x 30" 30-1/2" x 30-1/2" 7 21.5 lbs.
DW 30" X 36" 30-1/2" X 36-1/2" 8 29 lbs.
DW 32" x 32" 32-1/2" x 32-1/2" 7 23 lbs.
DW 36" x 36" 36-1/2" x 36-1/2" 8 31.5 lbs.
DW 36" x 48" 36-1/2" x 48-1/2" 9 42 lbs.
DW 48" x 48" 48-1/2" x 48-1/2" 11 58 lbs.
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
12 13
Suffix Optionso - AKL Allen Key Latcho - CL Cylinder Lock (one per door)q - CLD Cylinder Lock with Dust Shutter
(one per door)o - MAS Masonry Anchor Straps o - MLP Mortise Cylinder Lock (Prep)o - SS Stainless Steel Construction
(Type 304 No. 4 Satin Finish)o - TH 'T' Handle
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERo DW Dry Wall Access Door
(16 Gage Steel)
FRONT VIEW
SIDE VIEW
ACCESS DOORS: DW Series
Revised: 04/27/18DW
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STONEMAN • TEL : (800) 59 1 -9 1 8 1 • (6 2 6 ) 9 6 8 -8 6 9 9 • F AX : (6 2 6 ) 333-4109 • www.e lmdors toneman . com
NOMINAL
DOOR SIZE
(W X H) WALL OPENING LATCHES WEIGHT
DW 6" x 6" 6-1/2" x 6-1/2" 1 3 lbs.
DW 8" x 8" 8-1/2" x 8-1/2" 1 3 lbs.
DW 8" x 12" 8-1/2" x 12-1/2" 1 4 lbs.
DW 10" x 10" 10-1/2" x 10-1/2" 1 4 lbs.
DW 12" x 12" 12-1/2" x 12-1/2" 1 5.5 lbs.
DW 12" x 16" 12-1/2" x 16-1/2" 1 6 lbs.
DW 12" x 18" 12-1/2" x 18-1/2" 2 6.5 lbs.
DW 12" x 24" 12-1/2" x 24-1/2" 3 9.5 lbs.
DW 14" x 14" 14-1/2" x 14-1/2" 1 6 lbs.
DW 14" x 20" 14-1/2" x 20-1/2" 3 8 lbs.
DW 14" x 24" 14-1/2" x 24-1/2" 3 15 lbs.
DW 15" x 15" 15-1/2" x 15-1/2" 1 6.5 lbs.
DW 16" x 16" 16-1/2" x 16-1/2" 1 7.5 lbs.
DW 16" x 20" 16-1/2" x 20-1/2" 3 8.5 lbs.
DW 16" x 24" 16-1/2" x 24-1/2" 3 10 lbs.
DW 18" x 18" 18-1/2" x 18-1/2" 3 9 lbs.
DW 18" x 24" 18-1/2" x 24-1/2" 5 12 lbs.
DW 18" x 36" 18-1/2" x 36-1/2" 6 16 lbs.
DW 20" x 20" 20-1/2" x 20-1/2" 3 11 lbs.
DW 20" x 24" 20-1/2" x 24-1/2" 5 13 lbs.
DW 20" x 30" 20-1/2" x 30-1/2" 5 15 lbs.
DW 22" x 22" 22-1/2" x 22-1/2" 3 12 lbs.
DW 22" x 30" 22-1/2" x 30-1/2" 5 16 lbs.
DW 22" x 36" 22-1/2" x 36-1/2" 6 22 lbs.
DW 24" x 24" 24-1/2" x 24-1/2" 3 15 lbs.
DW 24" x 30" 24-1/2" x 30-1/2" 5 17 lbs.
DW 24" x 36" 24-1/2" x 36-1/2" 6 20.5 lbs.
DW 24" x 48" 24-1/2" x 48-1/2" 7 28 lbs.
DW 30" x 30" 30-1/2" x 30-1/2" 7 21.5 lbs.
DW 30" X 36" 30-1/2" X 36-1/2" 8 29 lbs.
DW 32" x 32" 32-1/2" x 32-1/2" 7 23 lbs.
DW 36" x 36" 36-1/2" x 36-1/2" 8 31.5 lbs.
DW 36" x 48" 36-1/2" x 48-1/2" 9 42 lbs.
DW 48" x 48" 48-1/2" x 48-1/2" 11 58 lbs.
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
13
q -CL Cylinder Lock (one per door)q -CLD Cylinder Lock with Dust Shutter (one per door)
Suffix Optionsq -AKL Allen Key Latch
q -SS Stainless Steel Construction (Type 304 No. 4 Satin Finish)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERq DWB Dry Wall Bead Access Door
DWB 8" x 8" 8-1/4" x 8-1/4" 1 3.5 lbs.
DWB 10" x 10" 10-1/4" x 10-1/4" 1 4.5 lbs.
DWB 12" x 12" 12-1/4" x 12-1/4" 1 6 lbs.
DWB 14" x 14" 14-1/4" x 14-1/4" 1 7 lbs.
DWB 18" x 18" 18-1/4" x 18-1/4" 3 11 lbs.
DWB 22" x 22" 22-1/4" x 22-1/4" 3 15 lbs.
DWB 24" x 24" 24-1/4" x 24-1/4" 3 16 lbs.
DWB 16" x 16" 16-1/4" x 16-1/4" 1 8 lbs.
DWB 30" x 30" 30-1/4" x 30-1/4" 7 24 lbs.
DWB 24" x 36" 24-1/4" x 36-1/4" 6 25 lbs.
DWB 36" x 36" 36-1/4" x 36-1/4" 8 33 lbs.
FRONT VIEWSIDE VIEW
ACCESS DOORS: DWB Series
NOMINALDOOR SIZE(W X H)
WALL OPENING(minimum required) LATCHES WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
DWB
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STONEMA N • T EL : (8 0 0 ) 591-9181 • (626) 968-8699 • F AX : (626) 333-4109 • www.e lmdors toneman . com
Revised: 05/07/18
1. DRYWALL
5. DRYWALL JOINT COMPOUND
6. DOOR
NOTES:
4. SCREWDRIVER OPERATED LATCH
3. MOUNTING HOLES
2. CONCEALED PIANO HINGE
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
14 15
Suffix Optionso - GB Galvanized Drywall Beado - SS Stainless Steel Construction
(Type 304 No. 4 Satin Finish)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERo ED Exterior Door for Walls and Ceilings
ACCESS DOORS: ED Series
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
Revised: 04/27/18ED
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
EL MDOR/STON E M AN • T E L : (800) 591-9181 • (626) 968-8699 • FAX : (626) 33 3 -4 1 0 9 • www.e lmd ors toneman . c om
KEY SHIPPED LOOSETAPE TO BACK OF
DOOR.
CONCEALED HINGE
FRAME
NEOPRENEGASKET
1/8" WIDTH(4 SIDES)
FOAMINSULATION
W+2"
W
214"
CYLINDERLOCK
KNURLEDKNOB
H+2"
H
214"
NOMINAL DOOR SIZE LOCK(W x H) WALL OPENING QTY WEIGHT
ED 8" x 8" 8-3/8" x 8-3/8" 1 5 lbs.
ED 12" x 12" 12-3/8" x 12-3/8" 1 15 lbs.
ED 14" x 14" 14-3/8" x 14-3/8" 1 17 lbs.
ED 18" x 18" 18-3/8" x 18-3/8" 1 20 lbs.
ED 22" x 30" 22-3/8" x 30-3/8" 2 32 lbs.
NOMINAL DOOR SIZE LOCK(W x H) WALL OPENING QTY WEIGHT
ED 30" x 30" 30-3/8" x 30-3/8" 2 38 lbs.
ED 36" x 36" 36-3/8" x 36-3/8" 2 50 lbs.
ED 36" x 48" 36-3/8" x 48-3/8" 2 81 lbs.
ED 24" x 24" 24-3/8" x 24-3/8" 1 28 lbs.
ED 24" x 36" 24-3/8" x 36-3/8" 2 40 lbs.
15
Suffix Optionso - GB Galvanized Drywall Beado - SS Stainless Steel Construction.
(Type 304 No 4 Finish Satin Finish)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERo EDI Exterior Door for Walls and Ceilings
With Internal Release Latch
ACCESS DOORS: EDI Series
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
EDI
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
E LMDOR/STONEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 333-4109 • www.e lmdors toneman . com
CONCEALED HINGE
FRAME
NEOPRENEGASKET
1/8" WIDTH(4 SIDES)
FOAMINSULATION
W+2"
W
THREADEDRING LATCH
H+2"
H
2 516
"
KEY SHIPPED LOOSETAPE TO BACK OF
DOOR.
Revised: 04/27/18
NOMINAL DOOR SIZE LOCK(W x H) WALL OPENING QTY WEIGHT
EDI 8" x 8" 8-3/8" x 8-3/8" 1 5 lbs.
EDI 12" x 12" 12-3/8" x 12-3/8" 1 15 lbs.
EDI 14" x 14" 14-3/8" x 14-3/8" 1 17 lbs.
EDI 18" x 18" 18-3/8" x 18-3/8" 1 20 lbs.
EDI 22" x 30" 22-3/8" x 30-3/8" 2 32 lbs.
NOMINAL DOOR SIZE LOCK(W x H) WALL OPENING QTY WEIGHT
EDI 30" x 30" 30-3/8" x 30-3/8" 2 38 lbs.
EDI 36" x 36" 36-3/8" x 36-3/8" 2 50 lbs.
EDI 36" x 48" 36-3/8" x 48-3/8" 2 81 lbs.
EDI 24" x 24" 24-3/8" x 24-3/8" 1 28 lbs.
EDI 24" x 36" 24-3/8" x 36-3/8" 2 40 lbs.
16 17
Cylinder Lock (one per door)
❑ -SS Stainless Steel Construction (Type 304 No. 4 Satin Finish)
Suffix Options ❑ -CL❑ -CLD Cylinder Lock with Dust Shutter
(one per door)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER❑ FR Fire Rated Access Door
FRONT VIEW
ACCESS DOORS: FR Series
SIDE VIEW
NOMINALDOOR SIZE(W X H) LATCHES WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
FR 8" x 8 8-3/8 x 8 1 6 lbs.FR 10" x 10" 10-3/8" x 10-3/8" 1 7.5 lbs.FR 12" x 12" 12-3/8" x 12-3/8" 1 9 lbs.FR 12” x 18" 12-3/8" x 18-3/8" 1 10.5 lbs.FR 12" x 24" 12-3/8" x 24-3/8" 1 13 lbs.FR 14" x 14" 14-3/8" x 14-3/8" 1 10 lbs.FR 16" x 16" 16-3/8" x 16-3/8" 1 12.5 lbs.FR 18" x 18" 18-3/8" x 18-3/8" 1 15 lbs.FR 20" x 20" 20-3/8" x 20-3/8" 1 18 lbs.FR 22" x 22" 22-3/8" x 22-3/8" 1 22 lbs.FR 22" x 30" 22-3/8" x 30-3/8" 2 28 lbs.FR 24" x 24" 24-3/8" x 24-3/8" 2 24.5 lbs.FR 24" x 36" 24-3/8"x 36-3/8" 2 33 lbs.FR 24" x 48" 24-3/8" x 48-3/8" 2 42 lbs.FR 30" x 30" 30-3/8" x 30-3/8" 2 33.5 lbs.FR 32" x 32" 32-3/8" x 32-3/8" 2 35 lbs.FR 36" x 36" 36-3/8" x 36-3/8" 2 43 lbs.FR 36" x 48" 36-3/8" x 48-3/8" 2 74 lbs.
" " -3/8"
WALL OPENING(minimum required)
Revised: 10/25/16FR
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STON EMA N • T E L : (800) 591-9181 • (626) 968-8699 • FAX : (626) 333- 4109 • w w w . e lm dors tone m a n . com
17
Galvanized Drywall BeadMortise Cylinder Lock (Prep)
Suffix Options ❑ -GB❑ -MLP❑ -SS Stainless Steel Construction
(Type 304 No. 4 Satin Finish)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER ❑ FRC Fire Rated Ceiling Access Door
Note: On sizes 16" x 16" and larger, an extra spring is supplied with the door and must be attached from back of door pan to framing, or floor above, in such a manner to ensure that door is self closing.
FRC 8 x 8 9-5/8 x 9-5/8 8-3/8 x 8-3/8 1 11 lbs.FRC 10" x 10" 11-5/8" x 11-5/8" 10-3/8" x 10-3/8" 1 12 lbs.FRC 12" x 12" 13-5/8" x 13-5/8" 12-3/8" x 12-3/8" 1 15 lbs.FRC 14" x 14" 15-5/8" x 15-5/8" 14-3/8" x 14-3/8" 1 17 lbs.FRC 16" x 16" 17-5/8" x 17-5/8" 16-3/8" x 16-3/8" 1 18 lbs.FRC 18" x 18" 19-5/8" x 19-5/8" 18-3/8" x 18-3/8" 1 20 lbs.FRC 18" x 24" 19-5/8" x 25-5/8" 18-3/8" x 24-3/8" 1 26 lbs.FRC 20" x 20" 21-5/8" x 21-5/8" 20-3/8" x 20-3/8" 1 24 lbs.FRC 22" x 30" 23-5/8" x 31-5/8" 22-3/8" x 30-3/8" 2 32 lbs.FRC 22" x 36" 23-5/8" x 37-5/8" 22-3/8" x 36-3/8" 2 40 lbs.FRC 24" x 24" 25-5/8" x 25-5/8" 24-3/8" x 24-3/8" 1 28 lbs.FRC 24" x 36" 25-5/8" x 37-5/8" 24-3/8" x 36-3/8" 2 40 lbs.
" " " " " "
ACCESS DOORS: FRC Series
NOMINALDOOR SIZE(W X H) CEILING OPENING LATCHES WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
WALL OPENING
Revised: 07/18/16FRC
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STON EM A N • T EL : ( 800) 591-9181 • (626) 968-8699 • FAX : (626) 33 3 -4 1 0 9 • www.e lmdors toneman . com
SIDE VIEW
FRONT VIEW
W
H
WALL OPENINGNOMINAL DOOR
SIZE + 3/8"
THREE HOUR RATEDCONSTRUCTION
ONE HOUR RATEDCONSTRUCTION
212"
1
1. LATCH SPRING2. HINGE BRACKET3. HINGE PIN4. DOOR5. FRAME
42 3 5
18 19
ACCESS DOORS: GD Series
Rev: 10/25/16GD
5. MOUNTING HOLES
NOTES:1. CONCEALED PIVOTING ROD HINGE2. DOOR3. FRAME4. SCREWDRIVER OPERATED LATCH
Suffix Options� - AKL Allen Key Latch� - CL Cylinder Lock (one per door)� - CLD Cylinder Lock with Dust Shutter
(one per door)� - SS Stainless Steel Construction
(Type 304 No. 4 Satin Finish)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER� GD Gasketed Access Door
(18 Gage Steel)
INCHES WALL OPENING LATCHES LBS. GD 8" x 8" 8-1/2" x 8-1/2" 1 3.5
GD 12" x 12" 12-1/2" x 12-1/2" 1 6GD 16" x 16" 16-1/2" x 16-1/2" 2 9GD 18" x 18" 18-1/2" x 18-1/2" 2 10.5GD 24" x 24" 24-1/2" x 24-1/2" 2 16GD 24" x 36" 24-1/2" x 36-1/2" 2 22
NOMINAL DOOR SIZE (W X H)
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
W
H
NOMINAL SIZE + 2"
112"
5
4
2
1
5
3
3
SECTION A-A
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
GD
ELMDOR/ST ON EM AN • T EL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 333-4109 • www.e l mdors toneman .co m
19
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER❏ GDT Grease Duct Door
New: 08/03/15GDT
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
E LMDOR/STONEMAN • T EL : (8 0 0 ) 591-9181 • (626) 968-8699 • FAX : (626) 3 3 3 -4 1 0 9 • www. e lmd ors tone man . c om
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
NOMINAL SIZE WING NUTS in. (mm) A in. (mm) B in. (mm) C in. (mm) D in. (mm) QTY #
7” (178) x 7” (178) 10” (254) 10” (254) 7” (178) 7” (178) 47” (178) x 12” (305) 10” (254) 15" (381) 7” (178) 12” (305) 67” (178) x 20” (508) 10” (254) 23" (584) 7” (178) 20” (508) 10
12” (305) x 12” (305) 15" (381) 15" (381) 12” (305) 12” (305) 812” (305) x 20” (508) 15" (381) 23" (584) 12” (305) 20” (508) 1216” (406) x 20” (508) 19" (483) 23" (584) 16” (406) 20” (508) 1220” (508) x 20” (508) 23" (584) 23" (584) 20” (508) 20” (508) 16
OVERALL SIZE FRAME OPENING
WINGNUTS
HIGH-TEMP GASKETPERMANENTLY ATTACHEDTO ACCESS PANEL
ACCESS FRAME
12"
16 GA.ACCESS
PANEL
MOUNTING FRAME16 GA. MILD STEEL
1/4-20 STUDS
DOPENING IN FRAME
A
B
COPENING IN
FRAME
HANDLE
1"
Page 2 of 2
20 21
Suffix Options“No Available Options”
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER❑ GFG Gypsum Fiber Glass
ACCESS DOORS: GFG Series
9” x 9” 15” x 15” 6 lbs.12" x 12" 18” x 18” 9 lbs.16" x 16" 22” x 22” 10 lbs.18" x 18" 24” x 24” 11 lbs.22" x 30" 28” x 36” 16 lbs.24" x 24" 30” x 30” 16 lbs.30" x 30" 36” x 36” 20 lbs.
NOMINALDOOR SIZE(W X H) ROUGH OPENING WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
Revised: 7/26/13GFG
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STONEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 333 -4 1 0 9 • w w w . e lmdors tone ma n . com
FRONT VIEW
SIDE VIEW
1
22
3 1
2" x 4" Studs(Shown For Reference)
NOTES:1. Panel Frame2. Door3. Mounting Hardware
(By Others)
9" SQ.
15" SQ.
21
ACCESS DOORS: HF Series
Revised: 10/25/16HF
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STON EMAN • TEL : ( 800) 5 9 1 -9 1 8 1 • (6 2 6 ) 9 6 8 -8 6 9 9 • F A X : (6 2 6 ) 333-4109 • www.e lmdor s toneman . com
Suffix Options❏ - AKL Allen Key Latch
- CL❏ Cylinder Lock (one per door) ❑ - CLD Cylinder Lock with Dust Shutter
(one per door)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER❏ HF Hidden Flange Access Door
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
NOTES:1. PANTOGRAPH HINGE2. DOOR3. FRAME4. SCREWDRIVER OPERATED LATCH5. MOUNTING HOLES
5
3
1
2
4
3
H
114"
W+11316"
H+ 11316"
W
SECTION A-A
4
FRAME SIZE(W x H)
INCHES (mm)WALL OPENING
INCHES (mm)LATCHES WEIGHT
lbs (kg)HF 8-1/4" x 8-1/4" (210 x 210) 8-1/2" x 8-1/2" (216 x 216) 1 3 (1.36)
HF 12" x 12" (305 x 305) 12-1/4" x 12-1/4" (312 x 312) 1 6 (2.72)HF 16" x 16" (406 x 406 16-1/4" x 16-1/4" (413 x 413) 1 9 (4.08)HF 18" x 18" (457 x 457) 18-1/4" x 18-1/4" (464 x 464) 3 10 (4.54)HF 24" x 24" (610 x 610) 24-1/4" x 24-1/4" (616 x 616) 4 17 (7.71)
AA
22 23
q -SS Stainless Steel Construction (Type 304 No. 4 Satin Finish)
Suffix Optionsq -AKL Allen Key Latchq -CL Cylinder Lock (one per door)q -CLD Cylinder Lock with Dust Shutter (one per door)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERq ML Metal Lath Access Door
ML 24” x 24” 24-1/4” x 24-1/4” 3 21 lbs.
ML 20” x 30” 20-1/4”x 30-1/4” 5 23.5 lbs.
ML 12” x 18” 12-1/4” x 18-1/4” 1 10 lbs.
ML 8” x 12” 8-1/4” x 12-1/4” 1 5.5 lbs.
ML 12” x 16” 12-1/4” x 16-1/4” 1 9 lbs.
ML 16” x 20” 16-1/4” x 20-1/4” 3 12.5 lbs.
ML 24” x 30” 24-1/4” x 30-1/4” 5 24.5 lbs.
ML 12” x 12” 12-1/4” x 12-1/4” 1 6.5 lbs.
ML 20” x 24” 20-1/4” x 24-1/4” 5 22 lbs.
ML 8” x 8” 8-1/4” x 8-1/4” 1 4 lbs.
ML 36” x 36” 36-1/4” x 36-1/4” 8 28 lbs.
ML 18” x 24” 18-1/4” x 24-1/4” 5 20 lbs.
ML 18” x 18” 18-1/4” x 18-1/4” 3 13 lbs.
ML 16” x 16” 16-1/4” x 16-1/4” 2 11 lbs.
ML 12” x 24” 12-1/4” x 24-1/4” 2 11.5 lbs.
ML 14” x 14” 14-1/4” x 14-1/4” 2 8 lbs.
ML 24” x 36” 24-1/4” x 36-1/4” 6 29.5 lbs.
ML 30” x 30” 30-1/4” x 30-1/4” 7 25.5 lbs.
ML 10” x 10” 10-1/4” x 10-1/4” 1 5.5 lbs.
SIDE VIEW
FRONT VIEW
ACCESS DOORS: ML Series
NOMINALDOOR SIZE(W X H)
WALL OPENING(minimum required) LATCHES WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
Revised: 05/07/18ML
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDO R/STONEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 333-4109 • www.e lmdors toneman . com
NOTES:
2. CONCEALED PIANO HINGE
1. FINISH LINE, PLASTER OVER MASONRY
5. SCREWDRIVER OPERATED LATCH
6. DOOR
4. MOUNTING HOLES
7. METAL LATH
3. FRAME
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
23
ACCESS DOORS: ODD Series
Revised: 06/26/18ODD
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STONEMAN • TEL : (800) 5 91-9181 • (626) 968-8699 • F AX : (626) 33 3-4109 • www.e l m dors tonem an . com
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
NOTES:1. FRAME2. DOOR3. POSITIVE CAM LOCK FASTENERS4. MOUNTING HOLES
A
C
BD
11
2
33
4
1
NOMINAL DOOR SIZE DIM "A" DIM "B" DIM "C" DIM "D" WEIGHT
ODD 8" x 5" (200mm x 125mm) 7-7/8" 5" 9-1/2" 6-1/2" 1 lbs
ODD 12" x 6" (300mm x 150mm) 11-7/8" 6" 13-1/4" 7-7/8" 1.26 lbs
ODD 18" x 10" (460mm x 260mm) 18-1/4" 10-1/4" 19-5/8" 11-7/8" 3.15 lbs
ODD 22" x 14" (550mm x 350mm) 21-5/8" 13-3/4" 23-1/4" 15-3/4" 5.3 lbs
ODD 26" x 18" (650mm x 450mm) 25-5/8" 17-3/4" 27-1/8" 19-5/8" 8.19 lbs
24 25
Suffix Optionsq -AKL Allen Key Latchq -CL Cylinder Lock (one per door)q -CLD Cylinder Lock with Dust Shutter (one per door)q -SS Stainless Steel Construction (Type 304 No. 4 Satin Finish)
BASE MODEL NUMBERq PW Plastered Wall Access Door
MODEL NUMBER AND OPTIONS SELECTION
PW 36" x 36" 36-1/4" x 36-1/4" 8 38 lbs.
PW 8" x 8" 8-1/4" x 8-1/4" 1 3.5 lbs.
PW 8" x 12" 8-1/4" x 12-1/4" 1 5 lbs.
PW 16" x 20" 16-1/4" x 20-1/4" 3 12 lbs.
PW 18" x 24" 18-1/4" x 24-1/4" 5 17.5 lbs.
PW 20" x 30" 20-1/4" x 30-1/4" 5 22 lbs.
PW 24" x 24" 24-1/4" x 24-1/4" 3 20 lbs.
PW 24" x 30" 24-1/4" x 30-1/4" 5 23.5 lbs.
PW 24" x 36" 24-1/4" x 36-1/4" 6 27 lbs.
PW 30" x 30" 30-1/4" x 30-1/4" 7 30 lbs.
PW 14" x 14" 14-1/4" x 14-1/4" 1 7.5 lbs.
PW 12" x 18" 12-1/4" x 18-1/4" 2 8.5 lbs.
PW 18" x 18" 18-1/4" x 18-1/4" 3 11 lbs.
PW 12" x 12" 12-1/4" x 12-1/4" 1 6 lbs.
PW 12" x 24" 12-1/4" x 24-1/4" 3 12 lbs.
PW 10" x 10" 10-1/4" x 10-1/4" 1 5.5 lbs.
PW 20" x 24" 20-1/4" x 24-1/4" 5 21 lbs.
PW 12" x 16" 12-1/4" x 16-1/4" 1 7.5 lbs.
PW 16" x 16" 16-1/4" x 16-1/4" 1 9.5 lbs.
FRONT VIEW
SIDE VIEW
ACCESS DOORS: PW Series
NOMINALDOOR SIZE(W X H)
WALL OPENING(minimum required) LATCHES WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
Revised: 05/07/18PW
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELM D OR /STON EMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 333-4109 • www.e lmdors toneman . com
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
H
W
3/4"
1 2 3
6 5 4
NOTES:1. CONCEALED PIANO HINGE2. FRAME3. MOUNTING HOLES
6. METAL ANGLE (FLANGE)5. DOOR4. SCREWDRIVER OPERATED LATCH 2"
77. FINISH LINE, PLASTER OVER MASONRY
25
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERq S009 12" x 12" Frame (for urinal installation) Panel Size: 13-1/2" x 13-1/2"q S010 13" (W) x 17" (H) Frame (for toilet installation) Panel Size: 15" (W) x 19" (H)
Note:Special sizes available upon request.
FRAME-SIDE VIEWPANEL-FRONT VIEW
ACCESS DOORS: S009/S010 Series
Revised: 06/11/18S009/S010
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STONEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 333-4109 • www.e lm dors tonem an . c om
PANELSIZE
FRAMESIZE
PANEL SIZE(W X H)
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
MODEL INCHES INCHES LBS.
S009 13-1/2" x 13-1/2 12" x 12" 6 lbs.
S010 15" x 19" 13" x 17" 7 lbs.
FRAME SIZE(W X H)
26 27
Allen Key LatchSuffix Options ❑ -AKL❑ -SS Stainless Steel Construction
(Type 304 No. 4 Satin Finish)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER ❑ SF Surf Access Door
SF 8” x 8” SF 7-5/8” x 7-5/8” 1 2.5 lbs.SF 10” x 10” SF 9-5/8” x 9-5/8” 1 3.5 lbs.SF 12” x 12” SF 11-5/8” x 11-5/8” 1 4 lbs.SF 14” x 14” SF 13-5/8” x 13-5/8” 1 6 lbs.SF 16” x 16” SF 15-5/8” x 15-5/8” 1 8 lbs.SF 18” x 18” SF 17-5/8” x 17-5/8” 3 9.5 lbs.SF 22” x 22” SF 21-5/8” x 21-5/8” 3 13.5 lbs.SF 24” x 24” SF 23-5/8” x 23-5/8” 3 16 lbs.
SIDE VIEW FRONT VIEW
ACCESS DOORS: SF Series
NOMINALDOOR SIZE
LATCHES WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
Revised: 07/18/16SF
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMD O R/S TO NEM A N • T EL : ( 800) 591-9181 • (626) 968-8699 • FAX : (626) 333- 4109 • www.e lm dors tonem an . com
H
W
H + 2"
W + 2"
3
2 1 4
NOTES:1. DOOR2. PIANO HINGE3. SCREWDRIVER OPERATED LATCH4. MOUNTING HOLES
ACTUALDOOR SIZE
(W x H)
27
Suffix Optionsq -LD Lock Provided by Others (1 Prep per Door)q -MAS Masonry Anchor Strapsq -MLP Mortise Cylinder Lock (1 Prep per Door)q -FA12 Folger Adams #10 lockq -FA12KEY Folger Adams key for #10 lock
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERq SLA Slammer Access Door
SLA 12" x 12" 12-1/2" x 12-1/2" 1 29 lbs. 0
SLA 24" x 48" 24-1/2" x 48-1/2" 1 96 lbs. 4
SLA 36" x 48" 36-1/2" x 48-1/2" 1 126 lbs. 4
SLA 24" x 24" 24-1/2" x 24-1/2" 1 59 lbs. 0
SLA 18" x 18" 18-1/2" x 18-1/2" 1 42 lbs. 0
SLA 36" x 36" 36-1/2" x 36-1/2" 1 102 lbs. 4
SLA 16" x 16" 16-1/2" x 16-1/2" 1 37 lbs. 0
SLA 24" x 36" 24-1/2" x 36-1/2" 1 78.5 lbs. 4
SIDE VIEW
FRONT VIEW
ACCESS DOORS: SLA Series
NOMINALDOOR SIZE(W X H)
WALL OPENING(minimum required) LOCK PREP
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
Revised: 05/10/18SLA
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STONEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 33 3 - 4 1 0 9 • www.e lmdors tonema n . com
WEIGHT-SDL
(Extra Latches)
1
W
H
72
3
4
56
8
2. Heady Duty Lock
4. Lock Keeper
Notes:1. Frame
3. Door Stop
5. Door6. Heavy Duty Hinge7. Mounting Holes8. SDL (Extra Latches)
Big Doors Only
28 29
Suffix Optionsq -AS Automatic Spring Door Closerq -SS Stainless Steel Construction (Type 304 No. 4 Satin Finish)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERq SLK Shur-Lok Access Door
SLK 8" x 8" 8-1/2" x 8-1/2" 1 4 lbs. 0
SLK 10" x 10" 10-1/2" x 10-1/2" 1 5.5 lbs. 0
SLK 12" x 12" 12-1/2" x 12-1/2" 1 7 lbs. 0
SLK 16" x 16" 16-1/2" x 16-1/2" 1 10 lbs. 0
SLK 22" x 22" 22-1/2" x 22-1/2" 1 17.5 lbs. 2
SLK 24" x 24" 24-1/2" x 24-1/2" 1 20.5 lbs. 2
SLK 18" x 24" 18-1/2" x 24-1/2" 1 16 lbs. 4
SLK 24" x 30" 24-1/2" x 30-1/2" 1 24 lbs. 4
SLK 30" x 30" 30-1/2" x 30-1/2" 1 28.5 lbs. 6
SLK 18" x 18" 18-1/2" x 18-1/2" 1 12 lbs. 2
SLK 36" x 36" 36-1/2" x 36-1/2" 1 41.5 lbs. 8
SLK 14" x 14" 14-1/2" x 14-1/2" 1 8 lbs. 0
SLK 24" x 36" 24-1/2" x 36-1/2" 1 28 lbs. 6
ACCESS DOORS: SLK Series
Revised: 5/16/18SLK
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELM DO R/ST O NEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 333-4109 • www.e lmdors ton ema n . c om
NOMINALDOOR SIZE(W X H)
WALL OPENING(minimum required) KEY QTY
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
WEIGHT-SDL
(Extra Latches)
1
W
H
3
5
4
2
114"
Notes:1. Concealed Hinge2. Door
4. Spring Door Lock3. Reinforcement Channel
5. SDL (Extra Latches) Big Doors Only
29
ACCESS DOORS: SMD Series
SMD
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/ST ONEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 333-4109 • www.e l mdors toneman .com
5. MOUNTING HOLES
NOTES:1. CONCEALED PIVOTING ROD HINGE2. DOOR3. FRAME4. ALLEN HEAD WITH SECURITY PIN
Suffix Options� - CL Cylinder Lock (one per door) � - CLD Cylinder Lock with Dust Shutter
(one per door)� - SS Stainless Steel Construction
(Type 304 No. 4 Satin Finish)
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER� SMD Medium Security Access Door
(12 Gage Steel)
NOMINAL DOOR SIZE (IN.) W x H LATCHES LBS. SMD 12" x 12" 11-1/2" x 11-1/2" 1 12SMD 16" x 16" 15-1/2" x 15-1/2" 2 18SMD 18" x 18" 17-1/2" x 17-1/2" 2 22SMD 24" x 24" 23-1/2" x 23-1/2" 4 34SMD 24" x 36" 23-1/2" x 35-1/2" 5 47SMD 34" x 36" 33-1/2" x 35-1/2" 5 65
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
NOMINAL SIZE + 2.5"
5
2
3
2"
H
W
4
5 3
SECTION A-A1
4
Rev: 10/25/16
31
Suffix Options� -AKL Allen Key Latch� -CL Cylinder Lock (one per door) � -CLD Cylinder Lock with Dust Shutter
(one per door)� -SS Stainless Steel Construction
(Type 304 No. 4 Satin Finish)� -TH ‘T’ Handle
Access Door
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER� WSR Weather Strip Removable
WSR 8" x 8" 8-1/2" x 8-1/2" 4 3.0 lbs.WSR 10" x 10" 10-1/2" x 10-1/2" 4 4.0 lbs.WSR 12" x 12" 12-1/2" x 12-1/2" 4 5.5 lbs.WSR 14" x 14" 14-1/2" x 14-1/2" 4 6.0 lbs.WSR 16" x 16" 16-1/2" x 16-1/2" 4 7.5 lbs.WSR 18" x 18" 18-1/2" x 18-1/2" 6 9.0 lbs.WSR 24" x 24" 24-1/2" x 24-1/2" 8 15.0 lbs.
ACCESS DOORS: WSR Series
NOMINALDOOR SIZE(W x H) WALL OPENING LATCHES WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
WSR
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/ST ONEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 333-4109 • www.e l mdors toneman .com
Revised: 10/25/16
1.
FRAME MOUNTING HOLE2.
LATCH ASSEMBLY
3.FRAME
WEATHER STRIP GASKET4.16 GAGE DOOR PANEL5.SLOTTED FLAT HEAD SCREW6.
1
23
4
56
4
NOMINAL SIZE + 1-5/8"(41mm)
1-1/4"(32mm)
W
H1
2
30
31
VALVE BOXES
AB
Close Up A
Close Up B
Hinge
Depth
Wall Opening
H
Door StopSteel ScrewdriverLatch Assembly
1/4-20 x 1/2"Flat Head Screw
16 gageprime coat door
W
Nominal Size + 1-5/8"
AB
Close Up A
Close Up B
Hinge
Depth
Wall Opening
H
Door StopSteel ScrewdriverLatch Assembly
1/4-20 x 1/2"Flat Head Screw
16 gageprime coat door
W
Nominal Size + 1-5/8"
32 33
VALVE BOXES: SVB Series
Revised: 11/11/16SVB
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/ST ONEMAN • TEL : (800) 591- 9181 • (626) 968- 8699 • FAX : (626) 3 3 3 -4 1 0 9 • www.e l mdors toneman .com
Suffix Options� - AKL Allen Key Latch� - CL Cylinder Lock� - CLD Cylinder Lock with Dust Shutter� - PC Prime Coat
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER� SVB Surface Mounted Valve Box
5. MOUNTING SLOTS
NOTES:1. EXPOSED PIANO HINGE2. DOOR3. BOX4. SCREWDRIVER LATCH
SVB 8" x 8" x 4" 1 10.0 lbs.SVB 8" x 8" x 6" 1 12.0 lbs.SVB 8" x 8" x 8" 1 12.0 lbs.SVB 12" x 12" x 4" 1 18.0 lbs.SVB 12" x 12" x 6" 1 20.0 lbs.SVB 12" x 12" x 8" 1 26.0 lbs.
NOMINALDOOR SIZE(W x H x Depth) LATCH WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
W
H
2"TYP.
2"TYP.
DEPTHNOMINAL SIZE + 1/2"
NOMINAL SIZE+
1/2"
4
1
2
3
5
33
Allen Key LatchCylinder Lock
Stainless Steel Construction. (Type 304 No 4 Finish Satin Finish)
❑ -TH T Handle
Suffix Options ❑ -AKL ❑ -CL❑ -CLD❑ -SS
Cylinder Lock with Dust Shutter
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER❑ VB Valve Box
VB 8" x 8" x 4" 8-1/2" x 8-1/2" 1 10.0 lbs.VB 8" x 8" x 6" 8-1/2" x 8-1/2" 1 12.0 lbs.VB 12" x 12" x 4" 12-1/2" x 12-1/2" 1 18.0 lbs.VB 12" x 12" x 6" 12-1/2" x 12-1/2" 1 20.0 lbs.VB 14" x 14" x 4" 14-1/2" x 14-1/2" 1 26.0 lbs.VB 14" x 14" x 6" 14-1/2" x 14-1/2" 1 28.0 lbs.VB 16" x 16" x 4" 16-1/2" x 16-1/2" 1 32.0 lbs.VB 16" x 16" x 6" 16-1/2" x 16-1/2" 1 34.0 lbs.
ACCESS DOORS: VB Series
NOMINALDOOR SIZE(W x H x Depth) WALL OPENING LATCH WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
VB
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
EL MDO R /S TO NEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 333-4109 • www.e lmdors toneman . com
Revised: 10/25/16
AB
Close Up A
Close Up B
Hinge Depth
Wall Opening
H
Door StopSteel ScrewdriverLatch Assembly
1/4-20 x 1/2"Flat Head Screw
16 gageprime coat door
W
Nominal Size + 1-5/8"
34 35
ROOF PIPE FLASHINGS
4
7 5
6
3
2
7
8
4
18
6" Skirt(Std)
6" Skirt(Std)
As Required
5”
5”
35
Revised: 8/28/181100
1100-7 Seriesq 1-1/4" q 1-1/2" q 2" q 2-1/2" q 3" q 3-1/2"
q 1100-5 Seamless Lead Flashing with Vandal Flash Hood
q 1/2" q 3/4" q 1" q 1-1/4" q 1-1/2" q 2" q 2-1/2" q 3"
q 4" q 5" q 6”
1100-5 Series
BASE MODEL #q 1100-4 Seamless Lead Flashing with Cast Iron Counterflashing
q 3-1/2" q 4" q 5" q 6"
q 2" q 2-1/2" q 3" q 3-1/2"
q 1100-7 Seamless Lead Flashing with Cast Iron Counterflashing and Vandal Flash Hood
NOMINAL PIPE SIZE (Roof Penetration)Must Specify1100-4 Series
q 4" q 5" q 6”
q 1-1/4" q 1-1/2"
q 8"
ROOF FLASHINGS: 1100 Flashing with Counterflashing
MATERIAL TYPE Must Specify
PVC Plastic Pipe and Non-Metallic Electrical Conduit)
q SPS Standard Pipe Size (Applies to Schedule 5 thru 160 Steel Pipe and Electrical Rigid Conduit; Schedules 40 & 80 ABS &
NOTES:
1. Roof penetration from 1" SPS to 12" SPS sizes.
4. Galvanized Steel Reinforcing Boot.
2. Roof Penetration with Vandal Flash hood from
1-1/2" SPS to 6" SPS sizes.
3. Seamless 4 lbs. Lead Flashing.
5. Cast Iron Set Screw Type Counterflashing.
8. Epoxy compound supplied by others.
7. Annular Space to be Field Sealed GE Type II Silicon Rubber
Caulk or Equal, by Others.
6. Cast Iron Set Screw Type Vandal Flash Hood.
4
7 5
6
3
2
7
8
4
18
8" Skirt(Std) 8" Skirt
(Std)
As Required
5”5”
1100-4 SeriesSeamless Lead Roof Flashing/
Counterflashing Assembly
1100-5 SeriesSeamless Lead Roof Flashing
with Vandal Flash Hood Assembly
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STONEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FAX : (626) 33 3 - 4 1 0 9 • www.e lmd ors tone ma n . c om
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
36 37
ROOF HATCHES
Anchorsby Others
Roof Sheathingby Others
12"(305 ) mm
/2-1 4"( )57 mm
W x H FRAME INNER DIMENSIONW X H ROOF DIMENSION 3-3/8”
( )86 mm3-3/8”
( )86 mm
37
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERq RAH Roof Access Hatch
ACCESS DOORS: RAH Series
E-24" x 24" -RAH-W 24" x 24" 31" x 31" 24" x 24" 84 lbs.
E-24" x 30" -RAH-W 24" x 30" 31" x 37" 24" x 30" 103 lbs.
E-24" x 36" -RAH-W 24" x 36" 31" x 43" 24" x 36" 124 lbs.
E-30" x 30" -RAH-W 30" x 30" 37" x 37" 30" x 30" 129 lbs.
E-30" x 36" -RAH-W 30" x 36" 37" x 43" 30" x 36" 155 lbs.
E-30" x 54" -RAH-W 30" x 54" 37" x 61" 30" x 54" 233 lbs.
E-30" x 96" -RAH-W 30" x 96" 37" x 103" 30" x 96" 413 lbs.
E-36" x 36" -RAH-W 36" x 36" 43" x 43" 36" x 36" 185 lbs.
E-36" x 48" -RAH-W 36" x 48" 43" x 55" 36" x 48" 248 lbs.
E-48" x 48" -RAH-W 48" x 48" 55" x 55" 48" x 48" 330 lbs.
* “W” or “H” greater then 48”: The hinge will be position onto the larger side.
NOMINALDOOR SIZE(W X H) WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
Revised: 05/18/16RAH
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STON EMAN • TEL : (800) 5 9 1 -9 1 8 1 • (6 2 6 ) 9 6 8 -8 6 9 9 • F A X : (6 2 6 ) 333-4109 • www.e lmdor s toneman . com
Exterior Lock Provision
VisualWarningSignal
Exterior Handle
14 GageGalvannealedSteel Cover
Integral Cap
Flashing
Built-upRoofing
by Others
Anchorsby Others
Roof Sheathingby Others
12"(305 ) mm
/2-1 4"( )57 mm
1"(25mm)
Thick Rigid Insulation withSteel Corners
-Wood (STD)-FESCO (Option)
Frame -14 gage (A60) GalvannealedSteel
Heavy Duty & Pivot Pin
Continuous ExtrudedSantopreneGasket
W x H FRAME INNER DIMENSIONW X H ROOF DIMENSION
Interior LockProvision
Interior Handle Hold OpenArm Assembly
Actuator Housing
Reinforcing Channel
1" (25mm) Thick Rigid InsulationR Value 5.9
Liner - 22 GageGalvannealed Steel with Visual Warning Signal
3-3/8”( ) 86 mm
FRAME INNERDIMENSION(W X H)
FRAME OUTERDIMENSION(W X H)
ROOF OPENINGDIMENSION(W X H)
3-3/8”( )86 mm
Suffix Optionsq - CM Curb Mountq - F FESCO
**
(Ref. View)
38 39
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERq RAH Roof Access Hatch
ACCESS DOORS: RAH Series
E-24" x 24" -RAH-W 24" x 24" 31" x 31" 24" x 24" 84 lbs.
E-24" x 30" -RAH-W 24" x 30" 31" x 37" 24" x 30" 103 lbs.
E-24" x 36" -RAH-W 24" x 36" 31" x 43" 24" x 36" 124 lbs.
E-30" x 30" -RAH-W 30" x 30" 37" x 37" 30" x 30" 129 lbs.
E-30" x 36" -RAH-W 30" x 36" 37" x 43" 30" x 36" 155 lbs.
E-30" x 54" -RAH-W 30" x 54" 37" x 61" 30" x 54" 233 lbs.
E-30" x 96" -RAH-W 30" x 96" 37" x 103" 30" x 96" 413 lbs.
E-36" x 36" -RAH-W 36" x 36" 43" x 43" 36" x 36" 185 lbs.
E-36" x 48" -RAH-W 36" x 48" 43" x 55" 36" x 48" 248 lbs.
E-48" x 48" -RAH-W 48" x 48" 55" x 55" 48" x 48" 330 lbs.
* “W” or “H” greater then 48”: The hinge will be positioned onto the larger side.
NOMINALDOOR SIZE(W X H) WEIGHT
STANDARD AVAILABLE SIZESSpecial sizes available upon request.
New: 06/20/17
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
ELMDOR/STONEMAN • TEL : (800) 5 91- 9181 • (626) 968- 8699 • FA X : (626) 33 3-4109 • www.e lmdors toneman . com
FRAME INNERDIMENSION(W X H)
FRAME OUTERDIMENSION(W X H)
ROOF OPENINGDIMENSION(W X H)
Suffix Optionsq - F FESCO
**
RAH-CMPAGE 2
Exterior LockProvision
Exterior Handle
ContinuousExtrudedSantopreneGasket
112"
(38mm)
12"(305mm)
Integral CapFlashing
Anchorsby Others
Heavy Duty Hinge& Pivot Pin
Frame - 14 Gage (A60)Galvannealed Steel
1" (25mm) ThickRigid Insulationwith Steel Corners
RH Size + 678" (175mm)
14 GageGalvannealedSteel Cover
VisualWarningSignal Reinforcing
Channel1" (25mm) ThickRigid InsulationR Value 5.9
(REF. VIEW)
Interior Lock Provision
Interior Handle
Liner - 22 GageGalvannealed Steelwith Visual Warning Signal
Hold OpenArm Assembly
Actuator Housing
"X " Inside Curb Dimension (Hinge on " Side)312"
(89mm)
2"(51mm) - Wood (STD)
-FESCO (Option)
Roofing & Curbs,by others
212"
39
OPTIONS
60"16"
4"
418"
40 41
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBERq TSP-1 Telescoping Safety Post
Telescoping Safety Post: TSP-1 Series
Revised: 07/27/16TSP-1
Dimensions are subject to manufacturer's toleranceof plus or minus 1/4". Elmdor/Stoneman assumesno responsibility for use of void or suspended data.Please visit www.elmdorstoneman.com for most current specifications. © Copyright 2009 Elmdor/Stoneman, City of Industry, CA, A Division of Acorn Engineering Company.
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options_____________________________________________________Quantity_______________ Company________________________________________________________________Date___________________ Contact_________________________________________________Title____________________________________ Approval for Manufacturing/Signature_________________________________________________________________
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
EL M D OR/STONEMAN • TEL : (800) 591-9181 • (626) 968-8699 • FA X : (626) 333-4109 • www.e lmdors toneman . com
60"16"
4"
418"
238"
1"
214"
12"
78"
214"
78"
112" SQ. TUBE
3"
158"
CUTTOUT
CLAMPING PLATE
CLAMPING PLATE
CONSTANT FORCE SPRING
3/8" BOLT & NUT
S. Ø1/8" U-BOLT
A. Ø3/8" U-CLIP
LOCKNUTS & WASHERS
814" RETRACTED
45" EXTENDEDLADDER SHOWNFOR REFERENCE ONLY
41
Allen Key LatchModel Number: Option AKL
This option is available on most non-rated doors. It provides a vandal resistant lock option. Provided one per latch; see appropriate model and size for the number of latches required.
Automatic Spring ClosureModel Number: Option AS
This option is available on our SLK series. It provides for a positive latching of the access door after use.
Cylinder LockModel Number: Option CL
As a deterrent to vandalism, option –CL provides a keyed latch for the door. Put the key into the lock and turn the key. The latch will rotate allowiing the door to be opened. Typically, a single lock is provided for each door. All cylinder locks supplied are keyed alike.
42 43
Cylinder Lock withDust ShutterModel Number: Option CLD
As a deterrent to vandalism, option –CLD provides a keyed latch for the door. As the key is pushed into the lock the dust shutter opens. Turn the key. The latch will rotate allowiing the door to be opened. As the key is removed, dust shutter closes to prevent dust and other small particles from entering the internal mechanism of the lock (compare to our -CL option). Typically, a single lock is provided for each door. All cylinder locks supplied are keyed alike.
Galvanized BeadModel Number: Option GB
This option is available on the AT, ED and FRC models. The door is provided with a galvanized bead frame which is tapeable and supports the joint compound which is applied to provide a frameless appearance
43
Masonry Anchor StrapsModel Number: Option MAS
This option is available on the DW and SLA series. For added stability when installing in a masonry application the masonry anchor straps are adhered to the frame
Mortise Lock PrepModel Number: Option MLP
This option is available on the FRC and SLA series. An mortise mechanism is placed on the door allowing for installation of a mortise cylinder allowing the building’s owners to provide their own secure keying system. Doors are standardly prepped for 1.125 inch mortise cylinders
T-HandleModel Number: Option TH
This option is available on most non-rated doors. The T-Handle is operated by a thumb and forefinger allowing for access without the requirement of a tool such as a screwdriver. Provided one per latch; see appropriate model and size for the number of latches required
17451 Hurley Street • P.O. Box 3527 • City of Industry, CA 91744 USATel (800) 591-9181 • (626) 968-8699 • www.elmdorstoneman.com
Font used: BEBAS NEUE
MORRIS INTERNATIONAL ME FZE
Est. 1946
Est. 1989
Est. 1853
Est. 1937
Est. 2014
Est. 2013
Est. 2015
Est. 1945
Est. 1953
Est. 1945
Est. 1990
Est. 2008
Est. 2013Est. 2014
Est. 1989
Est. 2015
Est. 1995
Est. 1958
Est. 1972
Est. 1966
Est. 1926
Est. 1954
Est. 1984 Est. 1953
Est. 1998
L10014100818