ISSUE DATE JAN-15 AT A GLANCE FEATURES Scratch-resistant ... · ISO 9001:2008 Tel: 1-941-538-7775...
Transcript of ISSUE DATE JAN-15 AT A GLANCE FEATURES Scratch-resistant ... · ISO 9001:2008 Tel: 1-941-538-7775...
Veethree Electronics and Marine LLC, 2050 47th
Terrace East, Bradenton, Florida 34203 USA
ISO 9001:2008 Tel: 1-941-538-7775 Fax: 1-941-755-1222 www.v3instruments.com
ISSUE DATE JAN-15 AT A GLANCE FEATURES � Scratch-resistant domed glass lens. � ISO symbols. � Pre-calibrated. � Easy U-clamp mounting. � White graphics on a black dial background. � Brushed stainless steel step profile bezel. � Flat glass lens with a low profile stepped bezel. � All lighting included. PAGE 1 OF 2
HEAVY DUTY RANGE OF INSTRUMENTS
The Heavy Duty line of gauges is a proven, accurate and reliable solution for a diverse range of industrial applications. The glass lenses are highly scratch resistant, providing a clear view of the fascia for the life of the gauge. White graphics on a black dial background are easy to read and white perimeter lighting can be added to provide good night visibility. Pointers are high contrast white. Standard bezels are stainless steel. The gauges are designed and manufactured to the highest standards to meet a full range of specifications, from temperature and shock to humidity and overvoltage requirements. The electrical movements are magnetically shielded to eliminate electrical interference and are CE certified. Silicone dampening minimizes pointer bounce caused by vibrations in harsh industrial environments. And, reverse polarity protection is designed into every Veethree electrical instrument.
Actual hole sizes: Nominal 2"=2.13/2.16" except Hourmeter=2.002/2.06". Nominal 3"=3.41/3.44".
Step-Profile
Veethree Electronics and Marine LLC, 2050 47th
Terrace East, Bradenton, Florida 34203 USA
ISO 9001:2008 Tel: 1-941-538-7775 Fax: 1-941-755-1222 www.v3instruments.com
HEAVY DUTY INSTRUMENTS
Ordering Information Size Dial Range Sender SS Step Bezel
Standard Flat Lens
Ammeter 2" 60-0-60 NA 80710
Hourmeter 2" 10,000 HRS NA 82760
Fuel Level 2" 2"
E-F E-F
0 – 90 OHM 240 – 33 OHM
61587 80150
Oil Pressure
2" 2"
0-80 PSI 0-100 PSI
240 – 33 OHM 240 – 33 OHM
80180 80181
Water Temperature 2" 2"
120 – 240 F 100 – 280 F
SW Match SW Match
80590 80593
Voltmeter
2" 2"
10 – 16 V 20 – 32 V
NA NA
80134 80131
Tachometer - Electrical, Diesel Alternator
3"
3.5 RPM Alternator 82302
Tachometer - Electrical, Diesel Mag. P/U
3"
3.5 RPM Mag P/U 82303
Tachometer – Electrical, Gas Engine
3"
6000 RPM
On Engine Coil
82288
Tach/Hour – Low Frequency, Programmable
3"
3.5 RPM Pulse Sensor 82430
Tach/Hour – High Frequency, Programmable
3"
3.5 RPM Pulse Sensor 82431
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -40°F to +158°F (-40°C to +70°C) Humidity Remains within initial accuracy specification in 95% relative humidity at 100 °F (37.8C) for 48 hours Overvoltage Withstands a maximum of 18 volts DC Salt Spray Conforms to ASTM 117 after 48 hours of salt spray exposure Shock Withstand Remains within initial accuracy specification up to 50 G's, half sine 9-13 milliseconds durations, 25 shocks of equal magnitude on each of three axes Vibration Withstand Remains within initial accuracy specification at .060" double amplitude vibration from 10-80 10 Hz for one minute periods over two hours in each of three axes (six hours total)
PAGE 2 OF 2