isovac 350-65 A - voestalpine.com · GOST 21427.2 ASTM A677 AISI IS648 GB/T2521.1 Material No....
6
isovac 350-65 A Manufactured in the most modern production lines, this fully processed isovac ® grade exhibits highly homogeneous properties across the width and length of the entire strip. The result is excellent and consistent processability in the manufacture of highly efficient electrical components. Upon request, isovac 350-65 A can be supplied with an electrical steel insulation system and can be used directly in as-delivered condition. Convincing advantages: » Best processability through consistent mechan- ical properties and homogeneous, clean sur- faces » Excellent stackability resulting from high dimen- sional accuracy in rolling direction and perpen- dicular to rolling direction (thickness tolerance) » Innovative electrical steel insulation systems upon request The perfect solution for direct application Electrical Steel | Fully processed Data sheet isovac 350-65 A | page 1/6 | 01/2018 voestalpine Steel Division www.voestalpine.com/isovac
Transcript of isovac 350-65 A - voestalpine.com · GOST 21427.2 ASTM A677 AISI IS648 GB/T2521.1 Material No....
Data sheet isovac 350-65 A | page 1/6 | 01/2018
isovac 350-65 A
Manufactured in the most modern production lines, this fully processed isovac® grade exhibits highly homogeneous properties across the width and length of the entire strip. The result is excellent and consistent processability in the manufacture of highly efficient electrical components.Upon request, isovac 350-65 A can be supplied with an electrical steel insulation system and can be used directly in as-delivered condition.
Convincing advantages: » Best processability through consistent mechan-ical properties and homogeneous, clean sur-faces
» Excellent stackability resulting from high dimen-sional accuracy in rolling direction and perpen-dicular to rolling direction (thickness tolerance)
» Innovative electrical steel insulation systems upon request
The perfect solution for direct application
Electrical Steel | Fully processed Data sheet isovac 350-65 A | page 1/6 | 01/2018
voestalpine Steel Division www.voestalpine.com/isovac
Data sheet isovac 350-65 A | page 2/6 | 01/2018
Grade namedaccording to isovac®
DIN EN 10106 IEC60404-8-4
JISC2552
GOST21427.2
ASTMA677
AISI IS648 GB/T2521.1Material No. Abbreviation
isovac 350-65 A 1.0820 M350-65A M350-65A 5 65A350 - 64F210 M-19 65C350 65W350
Grade named according to conventional international standards:
Grade named according to isovac®
Yield strength ReH
[MPa]
0.2 %-Yield strength Rp0.2
[MPa]
Tensile strength Rm
[MPa]
ElongationA80 [%]
HardnessHV5
[-]
isovac 350-65 A 355 350 485 28 180
Mechanical properties: Tensile test according to DIN EN ISO 6892-1 and hardness according to DIN EN ISO 6507-1 (Typical values); Test direction: Transverse
Specific total loss Magnetic polarization Relative permeability
Grade namedaccording to isovac®
1.0 T P10
1.5 TP15
2500 A/mJ25
5000 A/mJ50
10000 A/mJ100
1.5 Tµr
50 Hz[W/kg]
60 Hz[W/lb]
50 Hz[W/kg]
60 Hz[W/lb] [T] [T] [T] [-]
isovac 350-65 A 1.20 0.71 3.00 1.77 1.60 1.68 1.80 1700
Magnetic properties: in as-delivered condition (Typical values)Test direction: Mean value from longitudinal and transverse measurements at 50 Hz (60 Hz), single-sheet test
Grade named according to isovac®
Densityρ
[g/cm3]
Specific electrical resistanceρs
[µΩcm]
Thermal conductivityλ
[W/mK]
isovac 350-65 A 7.68 52.0 25
Physical properties: Typical values
voestalpine supplies isovac 350-65 A, an electrical steel of the highest quality. We offer you a customer-focused overall package of products, service and logistics in addition to all the advantages of our integrated metallurgical facility and Steel Service Centers.
Data sheet isovac 350-65 A | page 3/6 | 01/2018
Characteristics Ps/J loss curve and characteristics J/H magnetization curveTest direction: Mean value from longitudinal and transverse measurements at indicated frequencies, single-sheet test
Characteristics µr/J permeability curveTest direction: Mean value from longitudinal and transverse measurements at 50 Hz, single-sheet test
0.0
0.1
1.0
10.0
100.0
1000.0
0 500 1000 1500 2000
P S [W
/kg]
J [mT]
50 Hz
60 Hz
200 Hz
400 Hz
500 Hz
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
0 500 1000 1500 2000
µ r
J [mT]
50 Hz
0
200
400
600
800
1000
1200
1400
1600
1800
2000
10 100 1000 10000
J [mT]
H [A/m]
50 Hz
Data sheet isovac 350-65 A | page 4/6 | 01/2018
Frequency dependence of magnetic propertiesTest direction: Mean value longitudinal and transverse at indicated frequencies and polarizations, single-sheet test
50 Hz 60 Hz 200 Hz
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
100 27 0.02 3044
150 32 0.06 3546 150 32 0.07 3541 150 36 0.37 3104
200 37 0.09 4050 200 37 0.12 4032 200 42 0.62 3430
250 41 0.14 4543 250 41 0.17 4513 250 49 0.89 3744
300 46 0.18 5020 300 46 0.23 4977 300 55 1.18 4042
350 50 0.23 5476 350 50 0.28 5420 350 62 1.50 4317
400 54 0.28 5905 400 55 0.35 5837 400 68 1.85 4563
450 58 0.33 6302 450 59 0.42 6221 450 75 2.25 4776
500 62 0.40 6661 500 63 0.50 6568 500 81 2.69 4949
550 66 0.47 6978 550 66 0.59 6873 550 88 3.19 5078
600 69 0.54 7255 600 70 0.69 7139 600 94 3.74 5167
650 73 0.63 7496 650 73 0.79 7367 650 101 4.36 5219
700 76 0.71 7703 700 77 0.90 7561 700 108 5.03 5240
750 79 0.81 7878 750 80 1.02 7723 750 115 5.78 5234
800 83 0.91 8026 800 84 1.15 7857 800 123 6.59 5206
850 87 1.01 8146 850 88 1.28 7963 850 132 7.47 5160
900 91 1.12 8236 900 92 1.42 8038 900 141 8.42 5099
1000 101 1.36 8291 1000 103 1.73 8072 1000 162 10.60 4942
1050 108 1.48 8244 1050 109 1.90 8024 1050 173 11.84 4851
1100 114 1.62 8140 1100 116 2.08 7940 1100 185 13.19 4750
1150 123 1.77 7957 1150 124 2.27 7808 1150 197 14.65 4641
1200 136 1.93 7592 1200 136 2.48 7515 1200 211 16.23 4540
1250 157 2.09 6946 1250 156 2.70 6947 1250 227 17.95 4455
1300 186 2.28 6021 1300 184 2.93 6071 1300 240 19.79 4319
1350 232 2.48 4860 1350 231 3.20 4904 1350 259 21.74 4025
1400 348 2.71 3561 1400 346 3.49 3579 1400 352 23.83 3373
1450 605 2.96 2267 1450 599 3.81 2274 1450 603 26.04 2277
1500 1103 3.21 1239 1500 1095 4.14 1245 1500 1111 28.29 1214
1550 1935 3.45 677 1550 1931 4.45 679 1550 1962 30.51 642
1600 3144 3.67 430 1600 3147 4.74 429 1600 3193 32.80 420
1650 4732 3.90 297 1650 4741 5.03 295 1650 4798 35.29 302
1700 6592 4.14 218 1700 6602 5.33 216 1700 6671 37.93 223
1725 7500 4.21 183 1726 7500 5.51 183 1724 7500 39.01 183
1778 10000 4.51 142 1779 10000 5.90 142 1776 10000 42.39 141
Data sheet isovac 350-65 A | page 5/6 | 01/2018
Frequency dependence of magnetic propertiesTest direction: Mean value longitudinal and transverse at indicated frequencies and polarizations, single-sheet test
400 Hz 500 Hz
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
J [mT]
H[A/m]
Ps[W/kg]
µr[-]
150 43 1.04 2537
200 52 1.73 2772
250 60 2.46 2995
300 69 3.26 3200
350 78 4.15 3382
400 88 5.17 3534 400 97 7.00 3296
450 97 6.32 3651 450 108 8.79 3329
500 108 7.63 3728 500 120 10.77 3342
550 118 9.13 3759 550 133 13.13 3321
600 130 10.84 3752 600 148 15.85 3270
650 142 12.77 3712 650 165 18.88 3200
700 155 14.93 3648 700 182 22.16 3118
750 169 17.36 3568 750 199 25.66 3035
800 184 20.06 3479 800 216 29.31 2958
850 200 23.06 3386 850 233 33.17 2893
900 218 26.37 3292 900 252 37.68 2822
1000 258 34.07 3098 1000 310 50.74 2574
1050 280 38.50 2998 1050 341 58.20 2453
1100 302 43.35 2904 1100 365 64.87 2403
1150 324 48.63 2818 1150 392 72.72 2337
1200 351 54.40 2721 1200 424 81.50 2252
1250 385 60.67 2607 1250 460 90.66 2171
1300 406 67.39 2548 1300 489 100.77 2115
1350 411 74.50 2563 1350 514 112.23 2077
1400 464 82.00 2402 1400 577 123.51 1951
1450 657 89.85 1866 1450 738 134.04 1667
1500 1119 97.91 1207 1500 1124 147.99 1199
1550 1962 106.11 719
1600 3204 114.85 419
1650 4817 124.49 257
1700 6691 134.82 187
1724 7500 139.07 183
1776 10000 151.41 141
Data sheet isovac 350-65 A | page 6/6 | 01/2018
voestalpine Stahl GmbH voestalpine-Straße 34020 Linz, AustriaT. +43/50304/[email protected]/isovac
The information and product properties contained in this printed material are non-binding and serve the sole purpose of technical orientation. They do not replace individual advisory services provided by our sales and customer service teams. The product information and characteristics set forth herein shall not be considered as guaranteed properties unless explicitly stipulated in a separate contractual agreement. For this reason, voestalpine shall not grant any warranty nor be held liable for properties and/or specifications other than those subject to explicit agreement. This also applies to the suitability and applicability of products for certain applications as well as to the further processing of materials into final products. All application risks and suitability risks shall be borne by the customer. The General Terms of Sale for Goods and Services of the voestalpine Steel Division shall apply to all materials supplied by the voestalpine Steel Division and can be accessed using the following link: www.voestalpine.com/stahl/en/The-Steel-Division/General-Terms-of-Sale
Technical changes are reserved. Errors and misprints are excepted. No part of this publication may be reprinted without explicit written permission by voestalpine Stahl GmbH.
Please find further information and downloadable files at
www.voestalpine.com/isovac
Available Dimensions
Grade namedaccording to isovac®
Delivery form Width[mm]
Length[mm]
isovac 350-65 AWide strip / Slit strip 19 – 1590 -
Cut-to-length sheets 300 – 1590 300 – 5000
Grade namedaccording to isovac®
Uncoated C-3 Backlack C-5 C-6
isovac 350-65 A
Deliverable coating systems
Available On request
