ISO9001/14001/13485...ZenPure Americas, Inc [email protected] 703-335-9910 All Other Regions:...
Transcript of ISO9001/14001/13485...ZenPure Americas, Inc [email protected] 703-335-9910 All Other Regions:...
ZenPureZenPureInnovation, Speed, Flexibility, and Reliability
A Unique Provider of Filtration, Purification and Membrane Device Solutions
Product Catalog 2012 WWW.ZENPURE.COM
ISO9001/14001/13485
®
Our Capabilities and Services ZenPure is vertically integrated developer and manufacturer of filtration and purification products, and specialty membranedevices.
ZenPure capabilities include: Custom product design and development, tooling, process and equipment engineering, OEM and private label services.
We focus on speed and extreme flexibility to meet customers' challenging needs in performance and fast time to market.
Industries served
With our technical and applications know-how in filter performances, coupled with all in-house design and development, engineering, and manufacturing capabilities, we have been able to serve diversified industries worldwide,including:
• Medical and Medical equipment • Pharmaceuticals • Chemical and Industrial • Food and Beverages
Specializing in Custom Products
ZenPure works with both small and large companies to design,develop, and produce custom products. We provide service fromconcept and prototype through to production: • Rapid product turn around • Reliable processes and quality control • Design for optimum efficiency and cost • Dependable service and technical support
The success and satisfaction of our customers is our highest priority.
ZenPure Ze
nPur
e Table of Contents
Capsule Description Filter PrefixCatalog Page
Number
ZenPure Media Options Information 5
ZenPure Capsule Size Options Information 6
PureFlo Filtration Discs CN, DP, E, F, M, N, NS, P, HF, S*** 7PureFlo Filter Cups FS*** 8PureFlo D4 Disc Capsule D4*** 10PureFlo D13 Disc Capsule D13R*** 11PureFlo D13U Disc Capsule D13U*** 12PureFlo D25C Disc Capsule D25C*** 13PureFlo D25U Disc Capsule D25U*** 14PureFlo D40C Disc Capsule D40C*** 15PureFlo D50C Disc Capsule D50C*** 16PureFlo G50C Disc Capsule G50C*** 17PureFlo D65R Disc Capsule D65R*** 19Silicon Heater for D65 D65-SHS80501 21PureFlo Junior Capsule JKL, JNL, JKP*** 22PureFlo MKL Capsule MKL, MKP*** 24PureFlo MKL Capsule PE MKPE***-E 26ZenPure Vent & Drain Info for SK Capsules Information 28PureFlo SKV Series PES Capsule, Pharma Grade SKVS*** 32PureFlo SKV Series PES Capsule, Pharma Grade, with PE SKVS***-E 34PureFlo SKL Series PES Capsule, Pharma Grade SKLS***-PH 36PureFlo SKL Series PES Capsule, Biological Reduction Grade SKLS***-B 38PureFlo SKL Series PES Capsule, Standard Grade SKLS*** 40PureFlo SKV Series PTFE Capsule SKVF** 42PureFlo SKL Series PTFE Capsule SKLF** 44PureFlo SKL Series Nylon Capsule SKLN** 46PureFlo SKV Series Nylon Capsule SKVN*** 48PureFlo SNL Series All Nylon Capsule SNLN** 50PureFlo SNV Series All Nylon Capsule SNVN** 52PureFlo SKL Series Nylon Screen Capsule SKLNS*** 54PureFlo SKL Series PE Capsule SKLE*** 56PureFlo SKL Series Glass MicroFiber Capsule SKLG*** 58PureFlo SKL Series PP Membrane Capsule SKLM*** 61PureFlo SKL Series PP Media Capsule SKLP*** 62PureFlo SKL Series Mini Depth pleated PP Media Capsule SKDP*** 64PureFlo HEPA Capsule SKH*** 66PureFlo Carbon Fiber/HEPA Capsule SKC***, SKCH***, MKC*** 68PureFlo Lenticular Cloud D65R Disc Capsule D65CEP*** 70PureFlo SKV Series Lenticular Cloud Capsule SKVCEP*** 72PureFlo SKL Series Lenticular Cloud Capsule SKLCEP*** 73ZenCap Lenticular Cloud Capsule L**CEP*** 75ZenCap LT and LI Capsule L*** 78
Specialty FiltersPureFlo Ink Capsule IFC*** 80PureFlo Tank Vent Purifier SKCL 82PureFlo Shower Filter SKVPS*** 84PureFlo SVV Void Capsule SVV*** 87PureFlo SVL Void Capsule SVL*** 88PureFlo ZenCap Void Filter Capsule LV*** 89PureFlo SKML Mulit-Zone Capsule SKML*** 90PureFlo SKMV Mulit-Zone Capsule SKMV*** 92PureFlo EDF Capsule EDF*** 94
Page 2
ZenPure Ze
nPur
e Table of Contents
Cartridge DescriptionFilter Prefix
Catalog Page Number
PureFlo Mini Lenticular Cloud Filter MCEP*** 74PureFlo Lenticular Cloud Filter CEP*** 76PureFlo Junior Cartridge MJ*** 96
PureFlo Polypropylene membrane Cartridge MCP*** 98PureFlo Polypropylene Media Cartridge NCP*** 100PureFlo Depth Pleated PP cartrdige NDP*** 102PureFlo Industrial PP Cartridge NIP*** 104PureFlo PTFE Filter Cartridge MCF*** 106PureFlo Hi Temp PTFE Filter Cartridge Nylon Construction MNF*** 108PureFlo Hi Temp PTFE Filter Cartridge w/SS Core MSF*** 110PureFlo Hi Temp PTFE Filter Cartridge w/Hi=Temp PP Construction MBF*** 112PureFlo PE Cartridge MCE*** 115PureFlo Nylon Cartridge MCN*** 116PureFlo Nylon Plus Cartridge MNN*** 118PureFlo All-Nylon Cartridge MSN*** 120PureFlo Charged Nylon Cartridge EPN*** 122PureFlo Charged Nylon Cartridge MPN*** 122PureFlo PES Cartridge MCS*** 124PureFlo PES Pharma Grade Cartridge MCS*** -PH 126PureFlo PES Pharma Grade Cartridge Dual Layer MPS***-PH 126PureFlo PES Biological Reduction Grade Cartridge MCS*** -B 128PureFlo PES Beverage Grade Cartridge MBS*** 130PureFlo EPS Cartridge EPS*** 132PureFlo General Grade Cartridge MGS*** 134PureFlo Water Grade Cartridge MWS*** 136PureFlo Glass MicroFiber Cartridge NCG*** 138Thermally Bonded PP JT*** 140Thermally Bonded PP LF-PP** 142PureFlo Activated Carbon Fiber WCC*** 143String Wound Filter Cartridge SW*** 144PureFlo Mini Cartridge Configuration Information Information 147PureFlo Polypro Membrane Mini Cartridge MMP*** 148PureFlo Polypro Media Mini Cartridge NMP*** 150PureFlo Mini Depth Pleated PP Cartridge JDP*** 152PureFlo PTFE Mini Filter Cartridge MMF*** 154PureFlo PTFE Mini Vent Cartridge MVF*** 156PureFlo PE Mini Vent Cartridge MVE*** 156PureFlo PE Mini Cartridge MME*** 158PureFlo Nylon Mini Cartridge MMN*** 160PureFlo Charged Nylon Mini Cartridge EMN*** 162PureFlo PES Mini Cartridge MMS*** 164PureFlo Glass MicroFiber Mini Cartirdge NMG*** 166
Page 3
ZenPure Ze
nPur
e Table of Contents
Bag Filter DescriptionFilter Prefix
Catalog Page Number
MAXX PP Microfiber Element for Bag Filter Housing PMF*** 169MAXX Glass Fiber Element for Bag Filter Housing BMF*** 170MAXX PP Felt Element for BaG Filter Housing PPF*** 171MAXX Polyester Felt Element for Bag Filter Housing PEF*** 171MAXX Phenolic Polyester Element for Bag Filter Housing PTP*** 172Hi-Pro Micro Felt Bag Filter HPM*** 174Polyester Felt Bag Filter PE*** 176Polypropylene Felt Bag Filter PP*** 176Nylon mono-filiment Mesh Bag Filter NMO*** 178Polyester mono-filiment Mesh Bag Filter PEMO*** 178Polypropylene mono-filiment Mesh Bag Filter POMO*** 178Nylon Multi-filiment Mesh Bag Filter NMU*** 178Polyester Multi-filiment Mesh Bag Filter PEMU*** 178Polyester Chem Bag PE***-CB 180Polypropylene Chem Bag PP***-CB 180Resinator Bag Filter BRB*** 182
Housing DescriptionFilter Prefix
Catalog Page Number
Stainless Steel Disc Holder DH*** 184Stainless Steel Disc Media Holder DMP*** 185Virgin Polypropylene Housing PHV010*** 186Sanitary Mini Stainless Steel Housing SMP01*** 188Sanitary Stainless Steel Housing SHP01*** 190Sanitary SS Filter Housing Multi-round SAN*** 192Industrial Stainless Steel Housing IHP01*** 193Industrial High Purity SS Housing Multi-round IHP*** 195Industrial Economy Filter Housing Multi-round IE*** 196Band Clamp SS Filter Housing Multi-round GTCHB*** 197Industrial High Purity Bag Filter Housing IHPB*** 198SRL Series Bag Housing SRL*** 200SRS Series Bag Housing SRS*** 201SRH Series Bag Housing SRH*** 202SRM Series Multi-cavity Housing SRM*** 203Portable Filter Bag Cart CUSTOM 204Industrial High Purity Vent Housing IHP1IV*** 205Sanitary Stainless Steel Vent Housing SVP017*** 206Sample & Vent Valves OFSB*** 208Sanitary Y-Strainer SYS*** 210
InformationFilter Prefix
Catalog Page Number
ZenPure Media Options Information 5ZenPure Capsule Size Options Information 6ZenPure Vent & Drain Info for SK Capsules Information 28PureFlo Mini Cartridge Configuration Information Information 147Benefits of Electropolishing Information 212Chemical Compatability Table Information 213Terms & Conditions Information 216Trademarks Information 218
Page 4
ZenPure ZenPure Media Options
ZenP
ure
C = Carbon Fiber
CEP = Cellulose w/DE
CN = Charged Nylon
DP = Depth Polypropylene
E = Polyethylene
F = PTFE
G = Glass Fiber
HF = Philic PTFE
M = PP Membrane
N = Nylon
NP = PP Nano Fiber
NS = Nylon Screen
P = PP Media
S = PES
SS = Stainless Steel
TS = Polyester Screen
Carbon Fiber (C )
Cellulose w/DE (CEP)
Charged Nylon (CN)
Depth PP (DP)
Polyethylene (E) PTFE (F) Glass Fiber
(G)Philic PTFE
(HF)
015 = 0.15 005 = 0.05 002 = 0.2 020 = 0.20 010 = 0.1 005 = 0.5 Request040 = 0.40 010 = 0.10 005 = 0.5 100 = 1.0 020 = 0.2 010 = 1.0050 = 0.50 020 = 0.20 010 = 1.0 150 = 1.5 045 = 0.45 030 = 3.0060 = 0.60 045 = 0.45 015 = 1.5 250 = 2.5 100 = 1.0 050 = 5.0085 = 0.85 065 = 0.65 025 = 2.5 300 = 3.0 100 = 10.0150 = 1.50 080 = 0.80 045 = 4.5 500 = 5.0 200 = 20.0250 = 2.50 120 = 1.20 100 = 10 999 = 10.0 300 = 30.0300 = 3.00 200 = 20400 = 4.00600 = 6.0001X = 10.0**
PP Membrane
(M)Nylon (N) Polypro Nano
Fiber (NP)Nylon
Screen (NS)PP Media
(P) PES (S)Stainless
Steel Screen (SS)
Polyester Screen (TS)
010 = 0.1 005 = 0.05 005 = 0.5 100 = 10 003 = 0.3 004 = 0.04 018 = 18 200 = 20020 = 0.2 010 = 0.10 200 = 20 006 = 0.6 010 = 0.1 020 = 20 400 = 40
020 = 0.20 400 = 40 010 = 1.0 020 = 0.2 600 = 60045 = 0.45 600 = 60 030 = 3.0 045= 0.45 730 = 73065 = 0.65 10X = 100 050 = 5.0 065 = 0.65080 = 0.80 20X = 200 100 = 10.0 080 = 0.8120 = 1.20 200 = 20.0 120 =1.2
300 = 30.0500 = 50.0700 = 70.0
Leave pore size blank for Carbon
Fiber
** - Does not have DE
Pore size (Micron)
Pore size (Micron)
Page 5
ZenPure ZenPure Capsule Size Options
Size-Nominal Disc Capsules Millimeters Inches Millimeters Inches Millimeters
D4 4mm .472" 12mm 0.005in2 0.03cm2
D13 13mm .63" 16mm 0.012in2 0.8cm2
D25 25mm 1.3" 33mm 0.713in2 4.6cm2
D40 40mm 1.79" 45.5mm 1.628in2 10.5cm2
D50/G50 50mm 2.13" 54mm 2.47in2 15.9cm2
D65 65mm 2.874" 73mm 4in2 26cm2
Inches (Nominal)
Millimeters (without fittings) Inches Millimeters Inches Millimeters
Junior Capsules 1.6" 41mm 1.6" 41mm 31in2 – 40.3in2 200cm2 - 260cm2
Depending on Media Depending on Media
MKL/MKP SeriesA 3.9" 60mm 2.32" 59mm 31in2 200cm2
B 3.9" 60mm 2.32" 59mm 46.5in2 300cm2
C 3.9" 60mm 2.32" 59mm 62in2 400cm2
D 3.9" 60mm 2.32" 59mm 77.5in2 500cm2
SKL/SKV SeriesH 1.5" 68mm 2.88" 73.2mm .775ft2 720cm2
S 2.5" 98mm 2.88" 73.2mm 1.48ft2 1380cm2
L 5" 153mm 2.88" 73.2mm 2.8ft2 2600cm2
E 7.5" 251mm 2.88" 73.2mm 4.3ft2 3980cm2
K 10" 281mm 2.88" 73.2mm 5.6ft2 5200cm2
ZenCapT-Line 10" 352mm 3.54" 90mmT-Line 20" 596mm 3.54" 90mmT-Line 30" 841mm 3.54" 90mmT-Line 40" 1086mm 3.54" 90mmIn-Line 10" 273mm 3.54" 90mmIn-Line 20" 518mm 3.54" 90mmIn-Line 30" 763mm 3.54" 90mmIn-Line 40" 1008mm 3.54" 90mm
Varies According to Media
Size-Diameter Filtration Area
Size - Length
Varies According to MediaVaries According to MediaVaries According to MediaVaries According to Media
Size - Diameter Filtration Area
Varies According to Media
Varies According to MediaVaries According to Media
ZenP
ure
Page 6
ZenPurePureFlo® Filtration Discs
Zen
Pu
re ZenPureYour Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company. Copyright 2003-2012 ZenPure or an affiliated company. All rights reserved.
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
A4 Rev 2011.08
PureFlo® Membrane Discs can be used for simple, quick, and efficient filtration of fluids and gases used in laboratory, pilot, and small-scale applications. These discs can be used for clarification of acids, bases and solvents. The same membrane is used in the larger PureFlo family of filters to allow for consis-tent scale-up of the product.
PureFlo® Membrane Discs are available in a variety of different materials and diameter sizes to meet your applications and test equipment requirements. They are available in pore sizes ranging from 0.05um to 200um.
PureFlo Membrane Discs Ordering Guide
Materials of ConstructionMembrane: Nylon, Nylon Screen Polyethylene, PES,
Polypropylene Membrane, Polypropylene Media, and Hydrophilic and phobic PTFE bonded on to Polypro-pylene support
Operating ConditionsMax. Differential Pressure: 30 psid (2 bar) Maximum Operating Pressure Liquid: 60 psig @ 77° F (4 Bar @ 25° C) Maximum Operating Pressure Gas: 30 psig @ 77° F (2 Bar @ 25° C) Maximum Operating Temperature: 60° C
Available Diameters (mm) - 13, 25, 47, 90, 142
Regulatory Compliance The discs are manufactured from materials
that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regula-tions. Nylon PES, PTFE, and PP Membrane are also in compliance with the USP Class VI Biological Test for Plastics.
Charged Nylon Depth PP* Polyethylene PTFE
( Hyd rophob ic)
Polypro Membrane Nylon Nylon
Screen*Polypro Media*
PTFE ( Hydro phi l ic)
PES
CN = Charged Nylon 013 = 13 005 = 0.05 002 = 0.2um 020 = 0.20 010 = 0.10 010 = 0.1 005 = 0.05 100 = 10 003 = 0.3 020 = 0.20 005 = 0.05 25DP = Depth PP 025 = 25* 010 = 0.10 005 = 0.5um 100 = 1.0 020 = 0.20 020 = 0.2 010 = 0.10 200 = 20 006 = 0.6 045 = 0.45 010 = 0.10 50E = Polyethylene 047 = 47 020 = 0.20 010 = 1.0um 150 = 1.5 045 = 0.45 020 = 0.20 400 = 40 010 = 1.0 100 = 1.0 020 = 0.20F = PTFE (Hydrophobic) 090 = 90 045 = 0.45 015 = 1.5um 250 = 2.5 100 = 1.0 045 = 0.45 600 = 60 030 = 3.0 300 = 3.0 045 = 0.45M = PP Membrane 142 = 142 065 = 0.65 025 = 2.5um 300 = 3.0 065 = 0.65 10X = 100 050 = 5.0 500 = 5.0 065 = 0.65N = Nylon 080 = 0.80 045 = 4.5um 500 = 5.0 080 = 0.80 20X = 200 100 = 10 080 = 0.80NS = Nylon Screen 120 = 1.20 100 = 10um 999 = 10 120 = 1.20 200 = 20 120 = 1.20P = PP Media 200 = 20um 300 = 30HF = PTFE (Hydrophilic) 400 = 40S = PES 500 = 50
700 = 7015X = 150
*Note: All PP Media, Depth PP and Nylon Screen only sold in packs of 25, and 25mm disks only sold in packs of 25*Note: All PP Media, Depth PP and Nylon Screen only sold in packs of 25, and 25mm disks only sold in packs of 25Example – A pack of 25 discs, 47mm, 1.0 M cron Nylon Membrane Disc is N-047-100-25
Quantity (per pack)
Pore Sizes (Micron)
Filter MediaFilter
Diameter (mm)
Page 7
PureFlo® Filter Cup (Table Top Filtration)
ZenPure Ze
nPur
e
Vacuum Filter Cups
PureFlo® Filter Cups are a convenient, disposable unit for easy and high performance filtration of liquid solutions. Cups have a 175-mL capacity. Choose from 13 filter medias. Membranes are 63mm in diameter with a 31-cm2 filter area.
The filter cup is made of molded polypropylene with an integral thermally-bonded filter. Ideal for sterilizing tis-sue culture media, buffers, weak and dilute acids, and bases, and alcohols, or other solvent solutions. Consult chemical resistance charts before use.
The tapered cup and compact profile can be stacked for multiple and simultaneous filtration steps. The filter cups come stacked for easy and compact storage. For added protection against contamination, the cup has a bottom lip to prevent the bottom support grid from accidently touching working surfaces.
Order a filter funnel base to use the cup with vacuum pressure to speed the filtration process along. Bases easily attach to standard laboratory flasks with stopper sizes 5 through 8 available to fit standard size flask open-ings. The vacuum should be supplied gradually to 16” Hg (7.8 PSI).
Glass Flask not included
Specifications Materials of Construction: Cup Material: PP (standard), Polyethylene , Gamma Stabilized PP, and Nylon Membrane: 12 options (See ordering guide)
Fitting Connections: Vacuum Inlet: 3/8” Hose Barb Vacuum Inlet or none Stopper Sizes : 5,6,7,8
Nominal Dimensions: Diameter: 79mm Capacity: 175-mL
Effective Filtration Area: 63mm in diameter, 31cm2 filter area Available Ratings: 0.05– 150um (See ordering guide
Operating Conditions: Maximum Operational pressure: 16” Hg (7.8 PSI)(No Reverse direction) Maximum Operating Temperature: PP & Gamma PP 80°C/176°F, HDPE 60°C/140°F
Autoclavable & Sanitizable: Cups can be autoclaved 1 time at 123°C for 60 minutes or chemically sanitized by soaking common sanitizing agents or hot water at 80°C (no reverse pressure should be applied).
Regulatory Compliance: The cups are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastics.
Applications Pharmaceutical Products Analysis
Combinatorial Chemistry
Sample and Small Batch Clarification and Filtra-tion
Sample and Small Batch Preparation and Clean-Up
Purification and Concen-tration
Filtration of Aqueous and Organic Solutions
Environmental Monitor-ing and Analysis
Sterile Filtration
Laboratory Food and Beverage
Page 8
ZenPure PureFlo® Filter Cup
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
A5.5 Rev 2011.07
PureFlo Filter Cup Ordering Guide
CN = Charged Nylon A = 175mlE = PolyethyleneF = PTFE E = Polyethylene G =Glass FiberHF = Hydrophil c PTFEM = PP Membrane N = Nylon N = NylonNP = PP Nano FiberNS = Nylon ScreenP = PP MediaS = PES
TS = Polyester Screen
P = Polypropylene (standard)
FC = Filter Cup
Example – 25 Filter Cups with 1.0 Micron PTFE Filter Membrane, 175ml size Cup, PP material would be FCF100AP
GP = Gamma stabilized PP
Blank = 25ea/Box
PureFlo Filter Cup
-6-ETO = Indiv dually bagged Ethylene ox de sterilization (6 /box)
Pore Sizes (Micron)
Pick From Pore Size Table
Filter Media
SS = Stainless Steel Screen
Cup Size Cup Material Options
-12 = Individually bagged (12 /box)
Charged Nylon (CN)
Polyethylene (E)
Glass Fiber (G)
Hydrophobic PTFE (HF)
Hydrophilic PTFE (F)
Polypro Membrane
(M)Nylon (N) PP Nano
Fiber (NP)
Nylon Screen
(NS)
Polypro Media (P) PES (S)
Stainless Steel
Screen (SS)
Polyester Screen
(TS)
005 = 0.05 020 = 0.20 004 = 0.45 010 = 0.10 010 = 0.10 010 = 0.1 005 = 0.05 005 = 0.5 100 = 10 003 = 0.3 005 = 0.05 018 = 18 300 = 30010 = 0.10 100 = 1.0 005 = 0 5 020 = 0.20 020 = 0.20 020 = 0.2 010 = 0.10 200 = 20 006 = 0.6 010 = 0.10 020 = 20 730 = 73020 = 0.20 150 = 1.5 010 = 1 0 045 = 0.45 020 = 0.20 400 = 40 010 = 1.0 020 = 0.20045 = 0.45 250 = 2.5 030 = 3 0 100 = 1.0 045 = 0.45 600 = 60 030 = 3.0 045 = 0.45065 = 0.65 050 = 5 0 300 = 3.0 065 = 0.65 10X = 100 050 = 5.0 065 = 0.65080 = 0.80 100 = 10 500 = 5.0 080 = 0.80 20X = 200 100 = 10 080 = 0.80120 = 1.20 200 = 20 999 = 10 120 = 1.20 200 = 20 120 = 1.20
300 = 30 300 = 30400 = 40500 = 50700 = 7015X = 150
Pore Sizes (Micron)
0 = No StopperBP = Black PP 5 = Size 5
6 = Size 6 N = Buna N N = Buna N7 = Size 7 E = EPDM E = EPDM8 = Size 8 V = Viton V = Viton
E = Polyethylene
FS = Filter Cup Base
Stopper Size Stopper Materials O-Ring Materials
0 = Without hose barb
P = Polypropylene (standard) 0 = No O-ring
Base Type Cup Material
N = Nylon
GP = Gamma stabilized PP 1 = With hose barb
0 = No StopperS = Silicone (Standard) S = Silicone (Standard)
Example – Filter Cup base without hose barb, with PP material, Size 5 SIL stopper, SIL O-Ring would be FS0P5SS
Filter Cup Base
PureFlo Filter Base Ordering Guide Filter Base Spare Parts
Size Material
5 = Size 5 S = Silicone (Standard)6 = Size 6 N = Buna N7 = Size 7 E = EPDM8 = Size 8 V = Viton
Example: FS-RS-5-S = Filter cup base rubber stopper, Silicone materialFS-OR = for O-Ring on the Stem
= for rubber stopper
Filter Cup Base Spart Part Order
Type
Example: FS-OR-S = Filter cup base O-Rings, Silicone material
FS-RS
Size 5: 23mm at bottom/26mm at topSize 6: 26mm at bottom/32mm at topSize 7: 30mm at bottom/37mm at topSize 8: 33mm at bottom/40mm at top
Stopper Sizes
Page 9
ZenPure PureFlo® D4 Filter Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
A5.9 Rev 2011.08
PureFlo® D4 Filter Capsules have been designed for simple, quick, and efficient filtration of fluids used in laboratory and analytical small-scale applications. Ten different media options can be placed in an all-polypropylene construction for excellent chemical compatibility. The small compact design of the filter capsule also reduces hold-up volume and exposure to hazardous liquids. No adhesives, binders, or surfactants are used in the manufacturing process. The filters are thermally sealed to insure integrity.
Charged Nylon (CN)
Polyethylene (E) PTFE (F) Glass
Fiber (G)
Polypro Membrane
(M)Nylon (N)
Nylon Screen
(NS)
Polypro Media (P) PES (S)
CN = Charged Nylon 005= 0.05 020 = 0.20 010 = 0.10 004 = 0.45 010 = 0.1 005= 0 05 100 = 10 003 = 0.3 005 = 0.05 -1 = Single BaggedE = Polyethylene 010 = 0.10 100 = 1.0 020 = 0 20 005 = 0.5 020 = 0 2 010 = 0.10 200 = 20 006 = 0.6 010 = 0.10F = PTFE 020 = 0 20 150 = 1.5 045 = 0.45 010 = 1.0 020 = 0.20 400 = 40 010 = 1.0 020 = 0.20G = Glass Fiber 045 = 0.45 250 = 2.5 100 = 1 0 030 = 3.0 045 = 0.45 600 = 60 030 = 3.0 045 = 0.45M = PP Membrane 065 = 0 65 300 = 3 0 050 = 5.0 065 = 0.65 10X = 100 050 = 5.0 065 = 0.65N = Nylon 080 = 0 80 500 = 5 0 100 = 10 080 = 0.80 20X = 200 100 = 10 080 = 0.80NP = PP Nano Fiber 120 = 1 20 999 = 10 200 = 20 120 = 1.20 200 = 20 120 = 1.20 -NY = Nylon ShellNS = Nylon Screen 300 = 30 300 = 30 -V = PVC ShellP = PP Media 200 = 20 400 = 40S = PES 400 = 40 500 = 50
600 = 60 005 = 0.5 700 = 70730 = 73 15X = 150
Polypro Nano
Fiber (NP)
TS = Polyester Screen
Options
LF = Luer Lock Female
Other options are possible please inquire
PureFlo D4 Filter
CapsulesFilter Media
Pore Sizes (Micron)Inlet
FittingOutlet Fitting
-GP = Gamma stable Polypropylene Shell
Example – 1 0 Micron Nylon Filter Media with Luer Lock by Male Luer Lock fittings would be D4N100LFLM
D4 = 4mm Disc Filter
LF = Luer Lock Female
LM = Luer Lock Male -E = Polyethylene
Shell (for Gamma Stability)
LM = Luer Lock Male
Polyester Screen (TS)
-ETO = E hylene Ox de Sterilization
PureFlo D4 Filter Capsules Ordering Guide
Materials of ConstructionMembrane: Nylon, Nylon Screen Polyethylene, PES,
Polypropylene Membrane, Polypropylene Media, and PTFE
Operating ConditionsMax. Working Pressure: PP/HDPE/PVC 80 PSID @ 77°F/25°C (5.5 bar)
Gamma PP 45 PSID @ 77°F/25°C (3.1 bar) Minimum Burst pressure: PP/HDPE: 120 PSID @ 77° F/25°C (8.3 bar) Gamma PP: 60 PSID @ 77°F/25°C (4.1 bar) Maximum forward differential pressure: 60 PSID (4.1 bar) at 68°F (20°C) Maximum reverse differential pressure:
29 PSIG (2 bar) at 68°F (20°C) Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C PVC: 122°F/50°C
Fitting Connections Male & Female Luer Lock
Effective Filtration Area - 0.005in2 (0.03 cm2)
Autoclave Cycles - 10 times @ 257°F/125°C for 30 minutes. Capsules must not be in situ steam-sterilized
Regulatory Compliance The discs are manufactured from materials that
conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations. Medias and Membranes are also in compliance with the USP Class VI Biological Test for Plastics. (Except Blk PP and PVC.)
Page 10
ZenPurePureFlo® D13R Filter Capsules
Zen
Pu
re Your Local Distributor:
A6 Rev 2011.08
ZenPure
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company. Copyright 2003-2012 ZenPure or an affiliated company. All rights reserved.
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
PureFlo® D13R Filter Capsules have been designed for simple, quick, and efficient filtration of fluids used in laboratory and analytical small-scale applications. Eight different media options can be placed in an all-polypropylene construction for excellent chemical compatibility. The small compact design of the filter capsule also reduces hold-up volume and exposure to hazardous liquids. No adhesives, binders, or surfactants are used in the manufacturing process. The filters are thermally sealed using an overmold process to insure integrity and higher pressures.
Charged Nylon (CN)
Polyethylene (E) PTFE (F) Glass
Fiber (G)
Polypro Membrane
(M)Nylon (N)
Nylon Screen
(NS)
Polypro Media (P) PES (S)
CN = Charged Nylon 005= 0.05 020 = 0.20 010 = 0.10 004 = 0.45 010 = 0.1 005= 0.05 100 = 10 003 = 0 3 005 = 0.05 -1 = Single BaggedE = Polyethylene 010 = 0.10 100 = 1.0 020 = 0.20 005 = 0 5 020 = 0 2 010 = 0.10 200 = 20 006 = 0 6 010 = 0.10F = PTFE 020 = 0.20 150 = 1.5 045 = 0.45 010 = 1 0 020 = 0.20 400 = 40 010 = 1 0 020 = 0.20G = Glass Fiber 045 = 0.45 250 = 2.5 100 = 1.0 030 = 3 0 045 = 0.45 600 = 60 030 = 3 0 045 = 0.45M = PP Membrane 065 = 0.65 300 = 3.0 050 = 5 0 065 = 0.65 10X = 100 050 = 5 0 065 = 0.65N = Nylon 080 = 0.80 500 = 5.0 100 = 10 080 = 0.80 20X = 200 100 = 10 080 = 0.80
NS = Nylon Screen 120 = 1.20 999 = 10 200 = 20 120 = 1.20 200 = 20 120 = 1.20 -NY = Nylon ShellP = PP Media 300 = 30 300 = 30 -V = PVC ShellS = PES 200 = 20 400 = 40 LM = Luer Lock LM = Luer Lock
400 = 40 500 = 50600 = 60 700 = 70730 = 73 15X = 150
Polyester Screen (TS)
TS = Polyester Screen
-GP = Gamma stable Polypropylene Shell
1Q = 1/8" Male Quick Coupling
LF = Luer Lock Female
LF = Luer Lock Female
1Q = 1/8" Male Quick Coupling
Example – 1.0 Micron Nylon Filter Media with Luer Lock by luer Slip fittings would be D13RN100LFLS
LS = Luer Lock Male Slip
LS = Luer Lock Male Slip
-ETO = Ethylene Oxide Ster lization
Inlet Fitting
1H = 1/8" Hose Barb
1H = 1/8" Hose Barb
PureFlo D13R Filter Capsules Filter Media
D13R = 13mm
Options
-E = Polyethylene Shell (for Gamma Stability)
0H = 1/16" Hose Barb
Pore Sizes (Micron)
Outlet Fitting
0H = 1/16" Hose Barb
PureFlo D13R Filter Capsules Ordering Guide
Materials of ConstructionMembrane: Nylon, Nylon Screen Polyethylene, PES,
Polypropylene Membrane, Polypropylene Media, and Hydrophilic PTFE
Fitting Connections Male & Female Luer Lock, Luer Slip, 1/16” & 1/8” Hose
barb
Effective Filtration Area - 0.124in2 (0.8 cm2)
Autoclave Cycles - 10 times @ 257°F/125°C for 30 minutes Capsules must not be in situ steam-sterilized
Operating ConditionsMax. Working Pressure:
PP/HDPE/PVC 80 PSID @ 77°F/25°C (5.5 bar) Gamma PP 45 PSID @ 77°F/25°C (3.1 bar)
Minimum burst pressure: PP/HDPE: 120 PSID @ 77° F/25°C (8.3 bar)
Gamma PP: 60 PSID @ 77°F/25°C (4.1 bar) Maximum forward differential pressure:
60 PSID (4.1 bar) at 68°F (20°C) Maximum reverse differential pressure:
29 PSIG (2 bar) at 68°F (20°C) Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C PVC: 122°F/50°C
Regulatory ComplianceThe discs are manufactured from materials that con-form to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations. Medias and Mem-branes are also in compliance with the USP Class VI Biological Test for Plastics. (Except Blk PP and PVC.)
Page 11
ZenPure PureFlo® D13U Filter Capsules
ZenP
ure
Your Local Distributor:
A6.1 Rev 2011.08
ZenPure
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
PureFlo® D13U Filter Capsules have been designed for simple, quick, and efficient filtration of fluids used in laboratory and analytical small-scale applications. Nine different media options can be placed in an all-polypropylene construction for excellent chemical compatibility. The small compact design of the filter capsule also reduces hold-up volume and exposure to hazardous liquids. No adhesives, binders, or surfactants are used in the manufacturing process. The filters are ultrasonically sealed to insure integ-rity. It is an excellent low cost option for low pres-sure applications.
Charged Nylon (CN)
Polyethylene (E) PTFE (F) Glass
Fiber (G)
Polypro Membrane
(M)Nylon (N)
Nylon Screen
(NS)
Polypro Media (P) PES (S)
CN = Charged Nylon 005= 0.05 020 = 0.20 010 = 0.10 004 = 0.45 010 = 0.1 005= 0.05 100 = 10 003 = 0 3 005 = 0.05 -1 = Single BaggedE = Polyethylene 010 = 0.10 100 = 1.0 020 = 0.20 005 = 0 5 020 = 0 2 010 = 0.10 200 = 20 006 = 0 6 010 = 0.10F = PTFE 020 = 0.20 150 = 1.5 045 = 0.45 010 = 1 0 020 = 0.20 400 = 40 010 = 1 0 020 = 0.20G = Glass Fiber 045 = 0.45 250 = 2.5 100 = 1.0 030 = 3 0 045 = 0.45 600 = 60 030 = 3 0 045 = 0.45M = PP Membrane 065 = 0.65 300 = 3.0 050 = 5 0 065 = 0.65 10X = 100 050 = 5 0 065 = 0.65
N = Nylon 080 = 0.80 500 = 5.0 100 = 10 080 = 0.80 20X = 200 100 = 10 080 = 0.80NS = Nylon Screen 120 = 1.20 999 = 10 200 = 20 120 = 1.20 200 = 20 120 = 1.20 -NY = Nylon ShellP = PP Media 300 = 30 200 = 20 300 = 30 -V = PVC ShellS = PES 400 = 40 400 = 40 LM = Luer Lock LM = Luer Lock
600 = 60 500 = 50730 = 73 700 = 70
15X = 150
Polyester Screen (TS)
TS = Polyester Screen
Example – 1.0 Micron Nylon Filter Media with Luer Lock by luer Slip fittings would be D13UN100LFLS
1Q = 1/8" Male Quick Coupling
1Q = 1/8" Male Quick Coupling
-GP = Gamma stable Polypropylene Shell
PureFlo D13U Filter Capsules Filter Media
Pore Sizes (Micron)
Inlet Fitting Outlet Fitting
D13U = 13mm 0H = 1/16" Hose Barb
0H = 1/16" Hose Barb
1H = 1/8" Hose Barb
1H = 1/8" Hose Barb
Options
LS = Luer Lock Male Slip
LS = Luer Lock Male Slip
LF = Luer Lock Female
LF = Luer Lock Female
-ETO = Ethylene Oxide Sterilization
-E = Polyethylene Shell (for Gamma Stability)
PureFlo D13U Filter Capsules Ordering Guide
Materials of ConstructionMembrane: Nylon, Nylon Screen Polyethylene, PES,
Polypropylene Membrane, Polypropylene Media, and Hydrophilic PTFE
Fitting Connections - Male & Female Luer Lock, Luer Slip, 1/16” & 1/8” Hose barb
Effective Filtration Area - 0.124in2 (0.8 cm2)
Autoclave Cycles - 3 times @ 257°F/125°C for 30 min-utes. Capsules must not be in situ steam-sterilized
Regulatory ComplianceThe discs are manufactured from materials that con-form to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations. Medias and Mem-branes are also in compliance with the USP Class VI Biological Test for Plastics. (Except Blk PP and PVC.)
Liquid: 30 psi (2.1 bar) 30 psi (2.1 bar) 45 psi (3.1 bar) 60 psi (4.1 bar)Gas: 30 psi (2.1 bar) 30 psi (2.1 bar) 30psi (2.1 bar) 44 psi (3.0 bar)
45 psi (3.1 bar) 45 psi (3.1 bar) 60 psi (4.1bar) 80 psi (5.5 bar)176°F (80°C) 176°F (80°C) 140°F (70°C) 122°F (50°C)
30 psid (2.1 bar) 30 psid (2.1 bar) 30 psid (2.1 bar) 44 psid (3.0 bar)30 psid (2.1 bar) 30 psid (2.1 bar) 30 psid (2.1 bar) 30 psid (2.1 bar)
45 kGy 45 kGy
PP ShellGamma Stablized
PP Shell HDPE Shell PVC Shell
Maximum working pressure
Minimum burst pressure:Maximum working temp:
Maximum forward differential pressure: Maximum reverse differential pressure:
Maximum gamma irradiation resistance:
Operating Conditions
Page 12
ZenPure PureFlo® D25C Filter Capsules
ZenP
ure ZenPure
Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
A7 Rev 2011.08
PureFlo® D25C Filter Capsules (25mm diameter) have been designed for simple, quick, and efficient filtration of fluids and gases used in laboratory, pilot, and small scale applications. Eight different media options can be placed in an all-polypropylene construction for excellent chemical compatibility with 10 different fittings. The small compact design of the filter capsule also reduces hold-up volume and exposure to hazardous chemicals. No adhesives, binders, or surfactants are used in the manufacturing process. The unit is thermally-sealed to ensure integrity. Materials of Construction
Membrane: Nylon, Nylon Screen Polyethylene, PES, Polypropylene Membrane, Polypropylene Media, and Hydrophobic PTFE
Membrane Supports: Polypropylene Capsule Body: Polypropylene
Fitting Connections Luer Lock, Luer Slip, Hose Barb, Compression , NPT,
Quick Coupling Effective Filtration Area - 0.7in2 (4.6 cm2) Autoclave Cycles - 10 times @ 257°F/125°C for 30 minutes
Capsules must not be in situ steam-sterilized
PureFlo D25C Filter Capsules Ordering Guide
Charged Nylon (CN)
Polyethylene (E) PTFE (F) Glass
Fiber (G)
Polypro Membrane
(M)Nylon (N)
Nylon Screen
(NS)
Polypro Media (P) PES (S)
Stainless Steel
Screen (SS)
Polyester Screen
(TS)
005= 0.05 020 = 0.20 010 = 0.10 005 = 0.5 010 = 0.1 005= 0.05 100 = 10 003 = 0.3 005 = 0.05 018 = 18 200 = 20 0H = 1/16-3/32" Hose Barb 0H = 1/16-3/32" Hose Barb Blank = Polypropylene010 = 0.10 100 = 1.0 020 = 0.20 010 = 1.0 020 = 0.2 010 = 0.10 200 = 20 006 = 0.6 010 = 0.10 020 = 20 400 = 40 1C = 1/8" Compression 1C = 1/8" Compression -1 = Single Bagged
E = Polyethylene 020 = 0.20 150 = 1.5 045 = 0.45 030 = 3.0 020 = 0.20 400 = 40 010 = 1.0 020 = 0.20 600 = 60 1H = 1/8-3/16" Hose Barb 1H = 1/8-3/16" Hose BarbF = PTFE 045 = 0.45 250 = 2.5 100 = 1.0 050 = 5.0 045 = 0.45 600 = 60 030 = 3.0 045 = 0.45 730 = 73 1N = 1/8" NPTM 1N = 1/8" NPTMG = Glass Fiber 065 = 0.65 300 = 3.0 100 = 10 065 = 0.65 10X = 100 050 = 5.0 065 = 0.65 -BLK = Black PP shellM = PP Membrane 080 = 0.80 500 = 5.0 200 = 20 080 = 0.80 20X = 200 100 = 10 080 = 0.80N = Nylon 120 = 1.20 999 = 10 300 = 30 120 = 1.20 200 = 20 120 = 1.20 2H = 3/16-1/4" Hose Barb 2H = 3/16-1/4" Hose BarbNS = Nylon Screen 300 = 30 2UF = 1/4-28 thread Female 2UF = 1/4-28 thread Female -NY = Nylon ShellP = PP Media 400 = 40 3H = 1/4-3/8" Hose Barb 3H = 1/4-3/8" Hose Barb -V = PVC ShellS = PES 500 = 50 LF = Luer Lock Female LF = Luer Lock Female
700 = 70 LM = Luer Lock Male LM = Luer Lock Male10X = 100 LS = Luer Lock Male Slip LS = Luer Lock Male Slip O-Ring for Quick Connect15X = 150
-OE = O-ring EPDM-ON = O-ring Nitrile-OV = O-ring Viton
Inlet Fitting Outlet Fitting Options
-E = Polyethylene Shell (for Gamma Stability)
-ETO = Ethylene Oxide Sterilization
1Q = 1/8" Male Quick Coupling
CN= Charged Nylon
D25C = 25mm Capsule filter
Blank = O-ring Silicon (Standard)
TS = Polyester Screen
1Q = 1/8" Male Quick Coupling
SS = Stainless Steel Screen
PureFlo D25C Capsule Filters
Filter Media
Pore Sizes (Micron)
Example – 1.0 Micron Nylon Filter Media with 1/4-3/8" hose barb fitting inlet and outlet would be D25CN1003H3H
-GP = Gamma stable Polypropylene Shell
Operating ConditionsMax. Working Pressure: PP/HDPE/PVC 80 PSID @ 77°F/25°C (5.5 bar) Gamma PP 45 PSID @ 77°F/25°C (3.1 bar) Minimum burst pressure: PP/HDPE 120 PSID @ 77°F/25°C (8.3 bar) Gamma PP 60 PSID @ 77°F/25°C (4.1 bar)Maximum forward differential pressure: 60 PSID (4.1 bar) at 68°F (20° C)Maximum reverse differential pressure: 30 PSID (2.1 bar) at 68°F (20° C) Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C PVC: 122°F/50°C
Regulatory ComplianceThe discs are manufactured from materials that conform to the require-ments of 21CFR Part 177 of the U.S. Code of Federal Regulations. Medias and Membranes are also in compliance with the USP Class VI Biological Test for Plastics. (Except Blk PP and PVC)
Page 13
ZenPure PureFlo® D25U Filter Capsules
ZenP
ure ZenPure
Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
A7.2 Rev 2011.08
PureFlo® D25U Filter Capsules (25mm diameter) have been designed for simple, quick, and efficient filtration of fluids and gases used in laboratory, pilot, and small scale applications. Ten different media options can be placed in an all-polypropylene construction for excellent chemical compatibility with 11 different fittings. The small compact design of the filter capsule also reduces hold-up volume and exposure to hazard-ous chemicals. No adhesives, binders, or surfactants are used in the manufacturing process. The unit is ultrasonically-sealed to ensure integrity.
Materials of ConstructionMembrane: Nylon, Nylon Screen Polyethylene, PES, Polypro-
pylene Membrane, Polypropylene Media, and Hydrophobic PTFE, Glass Fiber, Polyester Screen, SS Screen
Membrane Supports: Polypropylene Capsule Body: PP, Nylon, PVC, PE
Fitting Connections - Luer Lock, Luer Slip, Hose Barb, Compres-sion, NPT, Quick Coupling
Autoclave Cycles - 3 times @ 257°F/125°C for 30 minutes Capsules must not be in situ steam-sterilized
Effective Filtration Area - 0.7in2 (4.6 cm2)
PureFlo D25U Filter Capsules Ordering Guide
Charged Nylon (CN)
Polyethylene (E) PTFE (F) Glass
Fiber (G)
Polypro Membrane
(M)Nylon (N)
Nylon Screen
(NS)
Polypro Media (P) PES (S)
Stainless Steel
Screen (SS)
Polyester Screen
(TS)
005= 0.05 020 = 0.20 010 = 0.10 005 = 0.5 010 = 0.1 005= 0.05 100 = 10 003 = 0.3 005 = 0.05 018 = 18 200 = 20 0H = 1/16-3/32" Hose Barb 0H = 1/16-3/32" Hose Barb Blank = Poly propylene
010 = 0.10 100 = 1.0 020 = 0.20 010 = 1.0 020 = 0.2 010 = 0.10 200 = 20 006 = 0.6 010 = 0.10 020 = 20 400 = 40 1C = 1/8" Compression 1C = 1/8" Compression -1 = Single Bagged
E = Polyethylene 020 = 0.20 150 = 1.5 045 = 0.45 030 = 3.0 020 = 0.20 400 = 40 010 = 1.0 020 = 0.20 600 = 60 1H = 1/8-3/16" Hose Barb 1H = 1/8-3/16" Hose BarbF = PTFE 045 = 0.45 250 = 2.5 100 = 1.0 050 = 5.0 045 = 0.45 600 = 60 030 = 3.0 045 = 0.45 730 = 73 1N = 1/8" NPTM 1N = 1/8" NPTMG = Glass Fiber 065 = 0.65 300 = 3.0 100 = 10 065 = 0.65 10X = 100 050 = 5.0 065 = 0.65M = PP Membrane 080 = 0.80 500 = 5.0 200 = 20 080 = 0.80 20X = 200 100 = 10 080 = 0.80N = Nylon 120 = 1.20 999 = 10 300 = 30 120 = 1.20 200 = 20 120 = 1.20 2H = 3/16-1/4" Hose Barb 2H = 3/16-1/4" Hose Barb -BLK = Black PP shellNS = Nylon Screen 300 = 30 2UF = 1/4-28 thread Female 2UF = 1/4-28 thread FemaleP = PP Media 400 = 40 3H = 1/4-3/8" Hose Barb 3H = 1/4-3/8" Hose BarbS = PES 500 = 50 LF = Luer Lock Female LF = Luer Lock Female -V = PVC Shell
700 = 70 LM = Luer Lock Male LM = Luer Lock Male10X = 100 LS = Luer Lock Male Slip LS = Luer Lock Male Slip15X = 150 -OE = O-ring EPDM
-ON = O-ring Nitrile-OV = O-ring VitonBlank = O-ring Silicon
Pore Sizes (Micron)
Example – 1.0 Micron Nylon Filter Media with 1/4-3/8" hose barb fitting nlet and outlet would be D25UN1003H3H
-E = Polyethylene Shell (for Gamma Stability)
-GP = Gamma stable Polypropylene Shell
-ETO = Ethylene Oxide Sterilization
O-ring for Quick Coupling
PureFlo D25U Capsule Filters
Filter Media
D25U = 25mm Capsule filter
1Q = 1/8" Male Quick Coupling
1Q = 1/8" Male Quick Coupling
CN = Charged Nylon
SS = Stainless Steel Screen
TS = Polyester Screen
Inlet Fitting Outlet Fitting Options
Regulatory Compliance The discs are manufactured from materials that con-
form to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations. Medias and Mem-branes are also in compliance with the USP Class VI Biological Test for Plastics. (Except Blk PP and PVC.)
Liquid: 30 psi (2.1 bar) 30 psi (2.1 bar) 45 psi (3.1 bar) 60 psi (4.1 bar)Gas: 30 psi (2.1 bar) 30 psi (2.1 bar) 30psi (2.1 bar) 44 psi (3.0 bar)
45 psi (3.1 bar) 45 psi (3.1 bar) 60 psi (4.1bar) 80 psi (5.5 bar)176°F (80°C) 176°F (80°C) 140°F (70°C) 122°F (50°C)
30 psid (2.1 bar) 30 psid (2.1 bar) 30 psid (2.1 bar) 44 psid (3.0 bar)30 psid (2.1 bar) 30 psid (2.1 bar) 30 psid (2.1 bar) 30 psid (2.1 bar)
45 kGy 45 kGy
Gamma Stablized PP Shell
Maximum reverse differential pressure:Maximum gamma irradiation resistance:
Operating ConditionsHDPE Shell PVC Shell
Maximum working pressure @ 77°F/25°C:Minimum burst pressure @ 77°F/25°C:
Maximum working temp: Maximum forward differential pressure :
PP Shell
Page 14
Your Local Distributor:
ZenPure
A7.7 Rev 2011.08
PureFlo® D40C Filter Capsule Ze
nPur
e ZenPure
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
Charged Nylon (CN)
Polyethylene (E) PTFE (F) Glass
Fiber (G)
Polypro Membrane
(M)Nylon (N)
Nylon Screen
(NS)
Polypro Media (P) PES (S)
Stainless Steel
Screen (SS)
005= 0.05 020 = 0.20 010 = 0.10 005 = 0.5 010 = 0.1 005= 0.05 100 = 10 003 = 0.3 005 = 0.05 018 = 18 0H = 1/16-3/32" Hose Barb 0H = 1/16-3/32" Hose Barb Blank = Poly propylene010 = 0.10 100 = 1.0 020 = 0.20 010 = 1.0 020 = 0.2 010 = 0.10 200 = 20 006 = 0.6 010 = 0.10 1C = 1/8" Compression 1C = 1/8" Compression -1 = Single Bagged
E = Polyethylene 020 = 0.20 150 = 1.5 045 = 0.45 030 = 3.0 020 = 0.20 400 = 40 010 = 1.0 020 = 0.20 1H = 1/8-3/16" Hose Barb 1H = 1/8-3/16" Hose BarbF = PTFE 045 = 0.45 250 = 2.5 100 = 1.0 050 = 5.0 045 = 0.45 600 = 60 030 = 3.0 045 = 0.45 1N = 1/8" NPTM 1N = 1/8" NPTMG = Glass Fiber 065 = 0.65 300 = 3.0 100 = 10 065 = 0.65 10X = 100 050 = 5.0 065 = 0.65 1Q = 1/8" Male Quick Coupling 1Q = 1/8" Male Quick Coupling -BLK = Black PP shellM = PP Membrane 080 = 0.80 500 = 5.0 200 = 20 080 = 0.80 20X = 200 100 = 10 080 = 0.80 200 = 20 2H = 3/16-1/4" Hose Barb 2H = 3/16-1/4" Hose BarbN = Nylon 120 = 1.20 999 = 10 300 = 30 120 = 1.20 200 = 20 120 = 1.20 400 = 40 2UF = 1/4-28 thread Female 2UF = 1/4-28 thread FemaleNS = Nylon Screen 300 = 30 600 = 60 3H = 1/4-3/8" Hose Barb 3H = 1/4-3/8" Hose Barb -NY = Nylon ShellP = PP Media 400 = 40 730 = 73 LF = Luer Lock Female LF = Luer Lock FemaleS = PES 500 = 50 LM = Luer Lock Male LM = Luer Lock Male
700 = 70 LS = Luer Lock Male Slip LS = Luer Lock Male Slip
-OE = O-ring EPDM-ON = O-ring Nitrile-OV = O-ring Viton
PureFlo D40C Filter Capsules
Filter Media
D40C = 40mm
Capsule filter
Example – 1.0 Micron Nylon Filter Media and Female Luer Lock fittings I/O would be D40CN100LFLF
-E = Polyethylene Shell (for Gamma Stability)
OptionsOutlet Fitting
-GP = Gamma stable Polypropylene Shell
Inlet Fitting
-ETO = Ethylene Oxide Sterilization
Blank = O-ring Silicon (Standard)
O-Ring for Quick Coupling
Pore Sizes (Micron)
CN = Charged Nylon
Polyester Screen (TS)
SS = Stainless Steel Screen
TS = Polyester Screen
40mm Disc Capsule filter
PureFlo® D40C Filter Capsules have been specially de-signed for simple, quick, and efficient filtration of fluids and gases used in laboratory, pilot, and small-scale ap-plications. Eleven different media options can be placed in an all-polypropylene construction for excel-lent chemical compatibility. The small compact design of the filter capsule reduces hold-up volume and expo-sure to hazardous chemicals. No adhesives, bind-ers, or surfactants are used in the manufacturing proc-ess. The unit is thermally-sealed to ensure integrity.
Effective Filtration Area - 10.5 cm2
Autoclave Cycles - 10 times @ 257°F/125°C for 30 minutes Capsules must not be in situ steam-sterilized
Regulatory Compliance The discs are manufactured from materials that conform
to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations. Medias and Membranes are also in compliance with the USP Class VI Biological Test for Plas-tics. (Except Blk PP and PVC.)
PureFlo D40C Filter Capsules Ordering Guide
Specifications Materials of Construction
Membrane: PE, PTFE, GF, PP, Nylon, PES, SS Membrane Supports: Polypropylene Capsule Body: Polypropylene Fitting Connections: See Ordering Guide
Operating ConditionsMax. Working Pressure: PP/HDPE/PVC 80 PSID @ 77°F/25°C (5.5 bar)
Gamma PP 45 PSID @ 77°F/25°C (3.1 bar) Minimum burst pressure: PP/HDPE: 120 PSID @ 77° F/25°C (8.3 bar) Gamma PP: 60 PSID @ 77°F/25°C (4.1 bar) Maximum forward differential pressure: 60 PSID (4.1 bar) at 68°F (20° C) Maximum reverse differential pressure: 30 PSID (2.1 bar) at 68°F (20° C) Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C PVC: 122°F/50°C
Dimensionsand
Fittings
Page 15
ZenPure PureFlo® D50C Filter Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
A8 Rev 2011.08
PureFlo® D50C Filter Capsules (50mm diameter) have been spe-cially designed for simple, quick, and efficient filtration of liquids and gases used in laboratory, pilot, and small-scale applications. Nine different media options with ten fitting options can be placed in an all-polypropylene or polyethylene shell construction for excellent chemical compatibility. The small, compact design of the filter capsule also reduces hold-up volume and exposure to hazardous chemicals. No adhesives, binders, or surfactants are used in the manufacturing process. The unit is thermally-sealed to ensure integrity.
Materials of ConstructionMembrane: Nylon, Nylon Screen, Polyethylene, PES, Polypropylene Membrane, Polypropylene Media, Hydrophobic and Hydrophilic PTFE Membrane Supports: Polypropylene Capsule Body: Polypropylene (standard)
Fitting Connections Luer Lock, Luer Slip, Hose Barb, Compression, NPT,
Quick Couplings Effective Filtration Area - 2.5in2 (15.9 cm2) Autoclave Cycles - 10 times @ 257°F/125°C for 30 minutes
Capsules must not be in situ steam-sterilized
Operating ConditionsMax. Working Pressure: PP/HDPE/PVC 80 PSID @ 77°F/25°C (5.5 bar)
Gamma PP 45 PSID @ 77°F/25°C (3.1 bar) Minimum burst pressure: PP/HDPE: 120 PSID @ 77° F/25°C (8.3 bar) Gamma PP: 60 PSID @ 77°F/25°C (4.1 bar) Maximum forward differential pressure:
60 PSID (4.1 bar) at 68°F (20°C) Maximum reverse differential pressure:
30 PSID (2.1 bar) at 68°F (20°C) Maximum Operating Temperature:
PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C PVC: 122°F/50°C
PureFlo D50C Filter Capsules Ordering Guide Charged
Nylon (CN)Polyethylene
(E) PTFE (F) Glass Fiber (G)
Polypro Membrane
(M)Nylon (N)
Nylon Screen
(NS)
Polypro Media (P) PES (S)
005= 0.05 020 = 0.20 010 = 0.10 005 = 0.5 010 = 0.1 005= 0.05 100 = 10 003 = 0.3 005 = 0.05 1N = 1/8" MNPT 1N = 1/8" MNPT
010 = 0.10 100 = 1.0 020 = 0.20 010 = 1.0 020 = 0.2 010 = 0.10 200 = 20 006 = 0.6 010 = 0.10 1NF = 1/8" FNPT 1NF = 1/8" FNPT
E = Polyethylene 020 = 0.20 150 = 1.5 045 = 0.45 030 = 3.0 020 = 0.20 400 = 40 010 = 1.0 020 = 0.20 1H = 1/8"-1/4"Hose Barb 1H = 1/8"-1/4"Hose BarbF = PTFE 045 = 0.45 250 = 2.5 100 = 1.0 050 = 5.0 045 = 0.45 600 = 60 030 = 3.0 045 = 0.45G = Glass Fiber 065 = 0.65 300 = 3.0 100 = 10 065 = 0.65 10X = 100 050 = 5.0 065 = 0.65M = PP Membrane 080 = 0.80 500 = 5.0 200 = 20 080 = 0.80 20X = 200 100 = 10 080 = 0.80N = Nylon 120 = 1.20 999 = 10 300 = 30 120 = 1.20 200 = 20 120 = 1.20 -NY = Nylon ShellNS = Nylon Screen 300 = 30 2C = 1/4" Compression 2C = 1/4" Compression -1 = Single BaggedP = PP Media 400 = 40 2H = 1/4"-3/8" Hose Barb 2H = 1/4"-3/8" Hose BarbS = PES 500 = 50 2N = 1/4" MNPT 2N = 1/4" MNPT
200 = 20 700 = 70 2NF = 1/4" FNPT 2NF = 1/4" FNPT -BLK = Black PP shell400 = 40 15X = 150600 = 60730 = 73 LF = Luer Lock Female LF = Luer Lock Female -OE = O-ring EPDM
-ON = O-ring Nitrile-OV = O-ring Viton
CN = Charged Nylon
Options
PureFlo D50C
Capsule Filters
Example – 1.0 Micron Nylon Filter Media with 1/4" hose barb fittings would be D50CN1002H2H
1Q = 1/8" Male Quick Coupling
1QF = 1/8" Female Quick Coupling
Filter Media
Pore Sizes (Micron)
D50C = 50mm
Capsule filter
Blank = Polypropylene Shell
1QF = 1/8" Female Quick Coupling
Input Fitting
-ETO = Ethylene Oxide Sterilization
Output Fitting
1Q = 1/8" Male Quick Coupling
-E = Polyethylene Shell (for Gamma Stability)
-GP = Gamma stable Polypropylene Shell
O-Ring for Quick Coupling
Blank = O-ring Silicon (Standard)
Polyester Screen (TS)
TS = Polyester Screen 2Q = 1/4" Male Quick
Coupling for Metal latch2Q = 1/4" Male Quick Coupling for Metal latch
Regulatory ComplianceThe discs are manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regu-lations. Medias and Membranes are also in compliance with the USP Class VI Biological Test for Plastics.(Except Blk PP & PVC.)
Page 16
ZenPure PureFlo® G50C Gas Filter Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
A8.5 Rev 2011.08
PureFlo® G50C Disc Capsules (50mm diameter) have been specially designed for simple, quick, and efficient filtration of gases. Eight different media options can be placed in an all-polypropylene or polyethylene shell construction for excellent chemical, gas compatibility. The small, compact design of the filter capsule allows for superior air flow rate and low backpres-sure. Ideal for vacuum pump protection from contamination. A hydrophobic 1um or smaller micron size should be used for the application. It can be used as a hydrophobic barrier to protect from viral and bacterial contamination. PTFE 0.2um and PE 0.2um rated filters can be used in sterile vent applications with extremely low resistance. Gamma sterilization resistant options are available.
Materials of ConstructionMembrane: Nylon, Nylon Screen Polyethylene, PES, Polypropylene Membrane, Polypropylene Media, Hydrophobic and Hydrophilic PTFE Membrane Supports: Polypropylene Capsule Body: PP, PE
Fitting Connections Luer Lock, Luer Slip, Hose Barb, Compression, NPT, Quick Cou-
plings, and more
Effective Filtration Area - 2.5in2 (15.9 cm2)
Autoclave Cycles - 10 times @ 257°F/125°C for 30 minutes Capsules must not be in situ steam-sterilized
Operating ConditionsMax. Working Pressure: PP/HDPE/PVC 80 PSID @ 77°F/25°C (5.5 bar)
Gamma PP 45 PSID @ 77°F/25°C (3.1 bar) Minimum burst pressure: PP/HDPE: 120 PSID @ 77° F/25°C (8.3 bar) Gamma PP: 60 PSID @ 77°F/25°C (4.1 bar) Maximum forward differential pressure: 60 PSID (4.1 bar) at 68°F (20°C) Maximum reverse differential pressure: 30 PSID (2.1 bar) at 68°F (20°C) Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C PVC: 122°F/50°C
Regulatory ComplianceThe discs are manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations. Medias and Membranes are also in compliance with the USP Class VI Biological Test for Plastics. (Except Blk PP and
PVC)
PureFlo G50C Filter Capsules Ordering Guide
Polyethylene (E) PTFE (F) Glass
Fiber (G)Polypro
Membrane (M) Nylon (N) Nylon Screen (NS)
Polypro Media (P) PES (S)
E = Polyethylene 020 = 0.20 010 = 0.10 005 = 0.5 010 = 0.1 005= 0.05 100 = 10 003 = 0.3 005 = 0.05 OV = Male Medical Coupling Regular
OV = Male Medical Coupling Regular
Blank = Polypropylene Shell
F = PTFE 100 = 1.0 020 = 0.20 010 = 1.0 020 = 0.2 010 = 0.10 200 = 20 006 = 0.6 010 = 0.10
G = Glass Fiber 150 = 1.5 045 = 0.45 030 = 3.0 020 = 0.20 400 = 40 010 = 1.0 020 = 0.20M = PP Membrane 250 = 2.5 100 = 1.0 050 = 5.0 045 = 0.45 600 = 60 030 = 3.0 045 = 0.45 1N = 1/8" MNPT 1N = 1/8" MNPTN = Nylon 300 = 3.0 100 = 10 065 = 0.65 10X = 100 050 = 5.0 065 = 0.65 1NF = 1/4" FNPT 1NF = 1/4" FNPTNS = Nylon 500 = 5.0 200 = 20 080 = 0.80 20X = 200 100 = 10 080 = 0.80P = PP Media 999 = 10 300 = 30 120 = 1.20 200 = 20 120 = 1.20 -1 = Single BaggedS = PES 300 = 30
400 = 40500 = 50 2H = 1/4"-3/8" Hose Barb 2H = 1/4"-3/8" Hose Barb -BLK = Black PP Shell700 = 70 2K = 1/4" Hose Barb 2K = 1/4" Hose Barb
15X = 150 2N = 1/4" MNPT 2N = 1/4" MNPT
200 = 20 2NF = 1/4" FNPT 2NF = 1/4" FNPT -OE = O-ring EPDM400 = 40 2QF = 1/4" Female Quick 2QF = 1/4" Female Quick -ON = O-ring Nitrile600 = 60 -OV = O-ring Viton730 = 73
1Q = 1/8" Male Quick Coupling
1Q = 1/8" Male Quick Coupling
1QF = 1/8" Female Quick Coupling
1QF = 1/8" Female Quick Coupling
2Q = 1/4" Male Quick Coupling for Metal latch
2QP = 1/4" Male Quick Coupling for Plastic latch
2Q = 1/4" Male Quick Coupling for Metal latch
2QP = 1/4" Male Quick Coupling for Plastic latch
Filter Media Output Fitting OptionsInput Fitting
-E = Polyethylene shell and HDPE media support for gamma sterilization
Pore Sizes (Micron)
OVS = Male Medical Coupling Short
OVS = Male Medical Coupling Short
-GP = Gamma stable Polypropylene Shell
Example – 1.0 Micron PTFE Filter Media with 1/4" hose barb fittings would be G50CF1002H2H
-ETO = Ethylene oxide sterilization
OVS is compatble w th -Parker/RECTUS 91 and 20 Wal her 06-003 and Value Plas ics -Bayonet Style Quick Connect
O-Ring for Quick Coupling
Blank = O-ring Silicon (Standard)
Polyester Screen (TS)
TS = Polyester Screen
PureFlo G50C
Capsule Filters
G50C = 50mm
Capsule filter
Page 17
ZenPure PureFlo® G50C Vacuum/Vent Capsule
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
A8.6 Rev 2011.08
PureFlo G50C Filter Capsules Ordering Guide
Polyethylene (E) PTFE (F)
E = Polyethylene 020 = 0.20 010 = 0.10 OV = Male Medical Coupling Regular OV = Male Medical Coupling Regular
F = PTFE 100 = 1.0 020 = 0.20 OVS = Male Medical Coupling Short OVS = Male Medical Coupling Short
150 = 1.5 045 = 0.45 1N = 1/8" MNPT 1N = 1/8" MNPT250 = 2.5 100 = 1.0 1NF = 1/8" FNPT 1NF = 1/8" FNPT
300 = 3.0 1Q = 1/8" Male Quick Coupling 1Q = 1/8" Male Quick Coupling500 = 5.0 1QF = 1/8" Female Quick Coupling 1QF = 1/8" Female Quick Coupling999 = 10 2H = 1/4"-3/8" Hose Barb 2H = 1/4"-3/8" Hose Barb -1 = Single Bagged
2K = 1/4" Hose Barb 2K = 1/4" Hose Barb2N = 1/4" MNPT 2N = 1/4" MNPT2NF = 1/4" FNPT 2NF = 1/4" FNPT -BLK = Black PP shell
-OE = O-ring EPDM-ON = O-ring Nitrile-OV = O-ring VitonBlank = O-ring Silicon (Standard)
2QP = 1/4" Male Quick Coupling for Plastic latch
2QP = 1/4" Male Quick Coupling for Plastic latch
2Q = 1/4" Male Quick Coupling for Metal latch
2Q = 1/4" Male Quick Coupling for Metal latch
2QF = 1/4" Female Quick Coupling 2QF = 1/4" Female Quick Coupling
Pore Sizes (in Microns)
Input Fitting Output Fitting Options
G50C = 50mm Capsule filter
Blank = Polypropylene Shell
-E = Polyethylene Shell & HDPE media support for Gamma Sterilization
-GP = Gamma stable Polypropylene Shell
PureFlo G50C Capsule Filters Filter Media
Example – 1.0 Micron PTFE Filter Media with 1/4" hose barb fittings would be G50CF1002H2H
-ETO = Ethylene Oxide Sterilization
O-Ring for Quick Coupling
OVS is compatible with - Parker/RECTUS 91 and 20 Walther 06-003 and Value Plactics - Bayonet Style Quick Connect
Bacterial Retention - 0.2um 99.999% retention of Brevundimonas diminuta in accordance with the current HIMA challenge methodology (ASTM F838-83).
Viral Retention - 0.2um 99.9999% retention with �X174 Bacteriophage (25-27nm (Nanometers), method adapted from ASTM F2101
HEPA – 1.0um and smaller Ensures particulate-free air 99.999% retention of 0.3 μm DOP aerosol
Pyrogenicity <0.25 EU/ml using the LAL test method
Autoclave Cycles - 10 times @ 257 F/125 C for 30 minutes Capsules must not be in situ steam-sterilized Regulatory Compliance
Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics.. Meets bacterial filter require-ments suggested by the Center for Devices and Radiological Health, Guidance Development for Power Suction Pump 510(k)s.
PureFlo® PTFE G50C Disc Capsules (50mm diameter) have been spe-cially designed for simple, quick, and efficient vacuum protection. Hydro-phobic PTFE membrane is placed in an all-polypropylene construction for excellent chemical compatibility. The small, compact design of the filter capsule allows for superior air flow rate and low system pressure resistance.
Provides an ideal effective barrier for vacuum/vent protection from bio-hazardous contamination. The filter assists in meeting the 29CFR1910.1030 OSHA Blood borne Pathogen Standard by serving as an “Engineering Control” to reduce human exposure. It can be used as a hydro-phobic barrier to protect from viral and bacterial contamination.
Materials of Construction Membrane: PTFE with polypropylene supports Capsule Body: Polypropylene Fitting: Hose Barb, NPT, Quick Coupling and more
Operating Conditions Max. Working Pressure: PP/HDPE/PVC 80 PSID @ 77 F/25 C (5.5 bar)
Gamma PP 45 PSID @ 77 F/25 C (3.1 bar) Minimum burst pressure: PP/HDPE: 120 PSID @ 77 F/25 C (8.3 bar) Gamma PP: 60 PSID @ 77 F/25 C (4.1 bar) Maximum forward differential pressure:
60 PSID (4.1 bar) at 68 F (20 C) Maximum reverse differential pressure: 30 PSID (2.1 bar) at 68 F (20 C) Maximum Operating Temperature: PP & Gamma PP: 176 F/80 C HDPE: 140 F/60 C PVC: 122 F/50 C
Page 18
PureFlo D65R Filter Capsules (Disc Capsule)
ZenPure Ze
nPur
e
Versatile Disc Capsule filter
PureFlo® D65R Filter Capsules (65mm diameter) have been designed for simple, quick, and effi-cient filtration of fluids and gases used in labora-tory, pilot, and small-scale applications. The fam-ily of products is particularly suitable for scale up testing. Ten different media options can be placed in an all-polypropylene construction for excellent chemical compatibility. There are 18 different fit-ting options that can be mixed and matched for the inlet and outlet fittings.
The compact design of the filter capsule also re-duces hold-up volume and exposure to hazardous chemicals. No adhesives, binders, or surfactants are used in the manufacturing process. The unit is thermally-sealed to ensure integrity. Applications
Low flow Ink Lab scale testing Beverages Bio Bags Pharmaceuticals Fine Chemicals Biologics Vent Filter Scale up processing Water Small volume Specifications
Materials of Construction: Media: Polypropylene, Nylon, PTFE, Polyethylene, Glass Fiber, and PES Media Supports: Polypropylene or Polyester Shell: Polypropylene or Polyethylene Sealing: Thermally-welded
Fitting Connections: See ordering guide for the availability. Any inlet/outlet combinations. (Custom adaptors available upon request)
Effective Filtration Area: 4in2 (26cm2)
Dimensions: 65mm (2.87in)
Available Ratings: 0.04um to 70um (see Ordering Guide)
Operating Conditions: Maximum Working Pressure: PP/HDPE/PVC 80 PSID @ 77°F/25°C (5.5 bar) Gamma PP 45 PSID @ 77°F/25°C (3.1 bar)
Minimum Burst pressure: PP/HDPE: 120 PSID @ 77° F/25°C (8.3 bar) Gamma PP: 60 PSID @ 77°F/25°C (4.1 bar) Maximum Forward differential pressure: 60 PSID (4.1 bar) at 68°F (20° C) Maximum Reverse differential pressure: 30 PSIG (2.1 bar) at 68°F (20° C) Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C PVC: 122°F/50°C
Autoclave Cycles: The filters can be sterilized by autoclaving for 10 cycles at 257°F/125°C for 30 minutes, except for PE membrane.
Capsules must not be in situ steam-sterilized.
Page 19
ZenPure PureFlo D65R Filter Capsules
Your Local Distributor:
A9 Rev 2011.08
ZenPure
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
PureFlo D65R Filter Capsule Ordering Guide
Dimensions (mm)
Carbon Fiber (C)
Charged Nylon (CN)
Depth PP (DP)
Polyethylene (E) PTFE (F) Glass
Fiber (G)Polypro
Membrane (M) Nylon (N) Nylon Screen (NS)
Polypro Media (P) PES (S)
C = Carbon Fiber 005= 0.05 002 = 0.2um 020 = 0.20 010 = 0.10 005 = 0.5 010 = 0.1 005= 0.05 100 = 10 003 = 0.3 005 = 0.05 1H = 1/8" Hose Barb 1H = 1/8" Hose Barb Blank = Polypropy ene Shell010 = 0.10 005 = 0.5um 100 = 1.0 020 = 0.20 010 = 1.0 020 = 0.2 010 = 0.10 200 = 20 006 = 0.6 010 = 0.10 1NF = 1/8" FNPT 1NF = 1/8" FNPT -GP = Gamma stabil zed PP shell020 = 0.20 010 = 1.0um 150 = 1.5 045 = 0. 5 030 = 3.0 020 = 0.20 400 = 0 010 = 1.0 020 = 0.20 1Q = 1/8" Male Quick Coupling 1Q = 1/8" Male Quick Coup ing -NY = Nylon Shell
DP = Depth PP 045 = 0. 5 015 = 1.5um 250 = 2.5 100 = 1.0 050 = 5.0 045 = 0. 5 600 = 60 030 = 3.0 045 = 0. 5 1QF = 1/8" Female Quick 1QF = 1/8" Female Quick E = Polyethylene 065 = 0.65 025 = 2.5um 300 = 3.0 100 = 10 065 = 0.65 10X = 100 050 = 5.0 065 = 0.65 2H = 1/ "-5/16" Hose Barb 2H = 1/ "-5/16" Hose BarbF = PTFE 080 = 0.80 045 = .5um 500 = 5.0 200 = 20 080 = 0.80 20X = 200 100 = 10 080 = 0.80 2N = 1/ " MNPT 2N = 1/ " MNPTG = Glass Fiber 120 = 1.20 100 = 10um 999 = 10 300 = 30 120 = 1.20 200 = 20 120 = 1.20 2NF = 1/ " FNPT 2NF = 1/ " FNPT -1 = Single BaggedM = PP Membrane 200 = 20um 300 = 30 -NV= No vent fittingN = Nylon 400 = 0 -FB = Fi ling Bell (with 2H only)NS = Nylon 500 = 50 -FC = Fi ling Bell w/ Cap (with 2H P = PP Media 700 = 70 -BLK = Black PP ShellS = PES 15X = 150 3H = 5/16-3/8" Hose Barb 3H = 5/16-3/8" Hose Barb
200 = 20 3N = 3/8" MNPT 3N = 3/8" MNPT400 = 0 3NF = 3/8" FNPT 3NF = 3/8" FNPT600 = 60 4N = 1/2" MNPT 4N = 1/2" MNPT730 = 73 FV = Female Ventilator FV = Female Ventilator
LF = Female Luer Lock LF = Female Luer Lock MT = 1/2" Tri Clamp MT = 1/2" Tri Clamp -OE = O-ring EPDMMV = Male Ventilator MV = Male Ventilator -ON = O-ring NitrileTC = 1.5" Tri Clamp TC = 1.5" Tri Clamp -OV = O-ring Viton
-E = Polyethy ene Shell and HDPE media support for gamma ster lizat on
Blank = O-ring Silicon (Standard)
-ETO = Ethylene oxide sterilization
O-Ring for Quick Coupling
Leave Pore Size Blank for Carbon
Fiber
TS = Polyester Screen
2QF = 1/ " Female Quick Coupling with Metal latch
2Q = 1/ " Male Quick Coup ing for Metal latch
2QF = 1/ " Female Quick Coupling with Metal latch
Pore Sizes (Micron)Input Fitting Output Fitting
CN = Charged Nylon
Polyester Screen (TS)
Options
2Q = 1/ " Male Quick Coupling for Metal latch
D65R = 65mm
Capsule filter
PureFlo D65R
Capsule Filters
Filter Media
Example – 1.2 Micron Nylon Filter Media with 1/2 tri clamp i tings would be D65RN120MTMT For Same f lter wi h Carbon Fiber D65RCMTMT
Regulatory Compliance:
The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regula-tions and USP Class VI Bio-logical Test for Plastic. (Except Blk PP and PVC)
Page 20
ZenPure Silicon Heater for the D65
ZenP
ure ZenPure
Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
A9.2 Rev 2011.07
D65 Silicon Heater
Silicon Heaters for the D65 are a reliable heat source capable of operating with excellent performance un-der many adverse conditions. This unit was designed to prevent condensation build up in the filter. The flexible silicon rubber are made of low mass construc-tion to provide rapid heat-up due to direct bonding to the part. Flexible heaters provide uniform heat trans-fer to irregular shaped or flat surfaces including three dimensional geometries, conforming to the filter be-ing heated. They are not affected by mechanical shock, vibration for repeated flexing and will not stretch or tear.
D65 Silicon Heater Part number Guide
SpecificationsSize: 3.75 x 3.75” 0.75” hole in center Wire:60” leadsThermocouple: Type K Operation Voltage: 24Volts, 4 watts Design :Fold Over Pocket Closure :Velcro straps
Performance ratingsMax. Temperature: 392F/ 200C Min Temperature : -80F/-62.2C Physically Resistant To: Moisture, Ozone, Fungus,
and Radiation
Additional Information Leads are Teflon® insulated, UL 1180,
type EE, flexible, stranded, plated copper wire rated for 392F (200C) and 300 volts. On silicon rubber heaters, the lead con-nections are insulated with vulcanized sili-con rubber, which also acts as a strain re-lief.
Part number: D65-SHS80501—Silicon Rubber Surface Heater, 60” Teflon lead, Fold– over pocket design with Velcro closure
Other custom units can be designed
Page 21
PureFlo® Junior Capsules Compact Filtration
ZenPure Ze
nPur
e
Small Disposable Process Filtration
PureFlo® Junior capsule filter assemblies are ready-to-use filters that offer high flows, increased throughputs, high strength, all with the convenience and cleanliness of a disposable and easy-to-install filter assembly in a small package. Designed for small pre-filtration, clarification, and final filtration, in pharmaceutical, biotechnology, food and beverage, medical, chemical, and DI water applica-tions.
PureFlo® Junior capsule assemblies are available with a wide range of hydrophilic and hydrophobic filter medias and pore sizes for liquid, gas, and venting applications. Process engineers can choose from 11 filtration medias to create any combination of integrated filtration.These will allow the disposable processing to become truly flexible, clean, and optimal.
They can be built with several configurations, with five inlet and outlet fitting connections that can be mixed and matched. The filtration shell is an all-polypropylene con-struction that provides excellent chemical compatibility with low extractables. The shell and supports can also be constructed in nylon, polyethylene, or gamma stabilized PP shells for additional compatibility. No adhesives, bind-ers, or surfactants are used in the manufacturing proc-ess.
Specifications Materials of Construction: Media: Charged Nylon, Depth PP, Polyethylene, PTFE, Glass Fiber, PP Membrane, Nylon, Nylon Screen, PP media, PES, and Polyester Screen Media Supports: Polypropylene, Polyester, Nylon, or HDPE Shell, Cage, Core, End Caps: Polypropylene, Nylon, or HDPE
Sealing: Thermally bonded
Fitting Connections: Five Fittings - See Ordering Guide for availability. (Custom adaptors available upon request)
Nominal Dimensions: Lengths: 1.6” (41mm) without fittings Diameter: 1.6” (41mm)
Effective Filtration Area: 260cm2 for single layer membrane, 230cm2 for double layer membrane 200cm2 for Depth and Screen Media
Available Ratings: 0.04um - 200.0um (Dependent on Media)
Operating Conditions: Maximum Operating pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 5 bar (72psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C
Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastics. (Except Blk PP)
Applications
Clarification Water & Wine
Hard Particle Food & Beverages Cell Removal Pharmaceuticals Chemicals Biologics Inks, Dyes Oils, Waters Cosmetics Diagnostics
Page 22
ZenPure PureFlo® Junior Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
A9.3 Rev 2011.08
PureFlo® Junior Filter Capsule Ordering Guide
Specifications (cont.)
Autoclavable & Sanitizable: Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Bacterial Endotoxin: Effluent is non-pyrogenic per USP Bacterial Endotoxin (0.25 EU/ml), determined using Limulus Amebocyte Lysate (LAL) Test.
Charged Nylon (CN)
Depth PP (DP)
Polyethylene (E) PTFE (F) Glass
Fiber (G)Polypro
Membrane (M) Nylon (N) Nylon Screen (NS)
Polypro Media (P)
Philic PTFE PES (S)
005= 0.05 002 = 0.2 020 = 0.20 010 = 0.1 005 = 0.5 010 = 0.1 005= 0.05 100 = 10 003 = 0.3 Request 005 = 0.05010 = 0.10 005 = 0.5 100 = 1.0 020 = 0.2 010 = 1.0 020 = 0.2 010 = 0.10 200 = 20 006 = 0.6 010 = 0.1020 = 0.20 010 = 1.0 150 = 1.5 045 = 0.45 030 = 3.0 020 = 0.20 400 = 40 010 = 1.0 020 = 0.2045 = 0.45 015 = 1.5 250 = 2.5 100 = 1.0 050 = 5.0 045 = 0.45 600 = 60 030 = 3.0 045 = 0.45065 = 0.65 025 = 2.5 300 = 3.0 100 = 10.0 065 = 0.65 10X = 100 050 = 5.0 065 = 0.65080 = 0.80 045 = 4.5 500 = 5.0 200 = 20.0 080 = 0.80 20X = 200 100 = 10.0 080 = 0.8120 = 1.20 100 = 10.0 999 = 10.0 300 = 30.0 120 = 1.20 200 = 20.0 120 = 1.2
200 = 20.0 300 = 30.0500 = 50.0700 = 70.0
Pore size (Micron)
PureFlo Junior Capsule Filters
PreFilter Filter Media
PreFilter Pore Size (Micron) Final Filter Media Pore Size
(Micron) Inlet Fitting Outlet Fitting Options
CN = Charged Nylon CN = Charged Nylon 1H = 1/8" Hose Barb 1H = 1/8" Hose BarbE = Polyethylene DP = Depth PolyPro 1Q = 1/8" Male Quick Coupling 1Q = 1/8" Male Quick CouplingF = PTFE E = Polyethylene 2H = 1/4" Hose barbs 2H = 1/4" Hose barbsG = Glass Fiber F = PTFE 2N = 1/4" MNPTM = PolyPro Mem G = Glass Fiber 2NO = 1/4" MNPT w/O-RingN = Nylon M = PolyPro MemNS = Nylon Screen N = NylonP = PolyPro Media NS = Nylon Screen 3H = 3/8" Hose BarbHF = Hydrophilic PTFE P = PolyPro Media LF = Female Luer LockS = PES HF = Hydrophilic PTFE MT = 1/2" Tri clamps 3H = 3/8" Hose Barb
S = PES LF = Female Luer LockMT = 1/2" Tri clamps -BLK = Black PP Shell
O-Ring for Quick CouplingBlank - for MJ Cartridge
-OE = O-Ring EPDM-ON = O-Ring Nitrile-OV = O-Ring Viton
-ETO = Ethylene oxide sterilization
-GP = Gamma stable polypropylene shell
Example - JKL Series, PTFE, 1 0um, no prefilter, 1/4" Hose Barb I/O is JKLF1002H2H
MJ = Cartridge Filter, PP parts standard Grade
JKL = Capsule filter PP parts
Standard grade
-E = Polyethylene shell and HDPE media support for gamma sterilization
( ,and PES Media
only)
Example - JKP Series, PES 0.8um prefilter, PES 0.2um, 1/4" Hose Barb I/O is JKPS0800202H2H
JNL = Capsule filter Nylon parts
Other Custom options are possible
JKP = Capsule Filter Pharma grade
Blank = No Pre filter
Pick From Pore Size Table
Pick From Pore Size Table
2Q = 1/4" Male Quick Coupling for Metal latch
2H -FB= 1/4" Hose barbs with Filling Bell
2H -FC= 1/4" Hose barbs with Filling Bell with Cap
2Q = 1/4" Male Quick Coupling for Metal latch
Blank = O-Ring Silicon (Standard)
Blank = No Pre filter Blank = Same media as Prefilter
-N = No vent or drain fittings
-NI = No vent or drain inlet fitting
-NO = NO vent or drain outlet fitting
Page 23
MKL Series Filter Capsules (Mini Capsule)
ZenPure Ze
nPur
e
Versatile Small Capsule filter
PureFlo® MKL Series capsules were designed for small-scale filtration, clarification, and filling ap-plications in the pharmaceutical, biotechnology, food and beverage, medical, chemical, water in-dustries worldwide. This family of products is par-ticularly suitable for scale-up testing where a full size capsule or cartridge would be excessive. They are also very suitable for disposable Bio-bag applications.
The MKL capsules have a compact design that can incorporate 200, 300, 400 or 500 cm2 of fil-tration material to meet the needs of different ap-plications. We are currently offering nine different media options with 15 different fitting options. The different possible materials of construction can provides excellent compatibility with a wide-range of chemicals such as acids, bases and solvents. No adhesives , binders, or surfactants are used in the manufacturing process. All units are thermally-sealed and 100% integrity tested.
Applications Low flow Ink Lab scale testing Beverages Bio Bags Pharmaceuticals Fine Chemicals Biologics Vent Filter Scale up processing Water Small volume
Specifications Materials of Construction: Media: Polypropylene, Nylon, PTFE, Polyethylene, Glass Fiber, and PES Media Supports: Polypropylene or Polyester Cage, Core, End Caps: Polypropylene or Polyethylene
Sealing: Thermally-welded
Fitting Connections: See ordering guide for the availability. Any inlet/outlet combinations. (Custom adaptors available upon request)
Nominal Dimensions: Lengths: 3.9 in. (99mm) Diameter: 2.3 in. (60 mm)
Available Ratings: 0.04um to 70um (see Ordering Guide)
Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Maximum Forward Differential Pressure: 5.0 bar (72 psid) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30 psid) at 176°F/80°C
Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C Minimum Burst Pressure: 8.3 bar (120 psid) at 77°F/25°C
Autoclavable & Sanitizable: Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sani-tized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic. (Except Blk PP)
Page 24
ZenPure MKL Series Filter Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
A9.5 Rev 2011.08
PureFlo MKL Series Filter Capsule Ordering Guide PureFlo Capsule
Filters Filter Media Pore size (Micron)
Surface Area Inlet Fitting Outlet Fitting Option
CN = Charged Nylon A = 200cm2 1C = 1/8" Compression 1C = 1/8" CompressionMKL = Capsule filter DP = Depth PolyPro B = 300cm2 1H = 1/8" Hose Barb 1H = 1/8" Hose Barb
Standard grade E = Polyethylene C = 400cm2 1Q = 1/8" Male Quick Coupling 1Q = 1/8" Male Quick CouplingF = PTFE D = 500cm2 1QE = 1/8" Male Quick Coupling Elbow
MKP = Pharma grade G = Glass Fiber 2C = 1/4" CompressionM = PolyPro Mem 2C = 1/4" Compression 2CE = 1/4" Compression ElbowN = Nylon 2CE = 1/4" Compression Elbow 2H = 1/4" Hose barbs -N = No vent or drain fittingsNS = Nylon Screen 2H = 1/4" Hose barbs 2H -FB = 1/4" Hose barbs with Filling Bell -NI = No vent or drain inlet fittingP = PolyPro Media 2N = 1/4" MNPT 2H -FC = 1/4" Hose barbs with Filling Bell w/ Cap -NO = NO vent or drain outlet HF = Hydrophilic PTFE 2NO = 1/4" MNPT+EP O-Ring 2N = 1/4" MNPT -NY = Nylon ShellS = PES 2NO = 1/4" MNPT+EP O-Ring
2Q = 1/4" Male Quick Coupling for Metal latch -BLK = Black PP Shell-ETO = Ethylene oxide sterilization
2QF = 1/4" Female Quick Coupling with Metal O-Ring for Quick Coupling3H = 3/8" Hose Barb Blank = O-ring Silicone (Standard)
3H = 3/8" Hose Barb 3H -FB = 3/8" Hose barbs with Filling BellLF = Female Luer Lock 3H -FC = 3/8" Hose barbs with Filling Bell w/ Cap -OE = O-ring EPDMLFE = Female Luer Lock Elbow LF = Female Luer Lock -ON = O-ring NitrileMT = 1/2" Tri clamps LFE = Female Luer Lock Elbow -OV = O-ring Viton
MT = 1/2" Tri clampsExample - MKL Series, PTFE, 1.0um, 500cm2, 1/4" Hose Barb I/O is MKLF100D2H2H
2Q = 1/4" Male Quick Coupling for Metal latch
2QF = 1/4" Female Quick Coupling with Metal latch
-GP = Gamma stable polypropylene shell
Pick From Pore Size Table
1QE = 1/8" Male Quick Coupling Elbow
2QE = 1/4" Male Quick Coupling for Metal latch Elbow
( For PTFE, PES and PE Media only)
2QE = 1/4" Male Quick Coupling for Metal latch Elbow
-E = Polyethylene shell and HDPE media support for gamma sterilization
Charged Nylon (CN) Depth PP (DP) Polyethylene (E) PTFE (F) Glass Fiber (G) Polypro
Membrane (M) Nylon (N) Nylon Screen (NS) PP Media (P) Philic PTFE PES (S)
005= 0 05 002 = 0.2 020 = 0.20 010 = 0.1 005 = 0.5 010 = 0.1 005= 0.05 100 = 10 003 = 0.3 Request 005 = 0.05010 = 0.10 005 = 0.5 100 = 1.0 020 = 0.2 010 = 1.0 020 = 0.2 010 = 0.10 200 = 20 006 = 0.6 010 = 0.1020 = 0.20 010 = 1.0 150 = 1.5 045 = 0.45 030 = 3.0 020 = 0.20 400 = 40 010 = 1.0 020 = 0.2045 = 0.45 015 = 1.5 250 = 2.5 100 = 1.0 050 = 5.0 045 = 0.45 600 = 60 030 = 3.0 045 = 0.45065 = 0.65 025 = 2.5 300 = 3.0 100 = 10.0 065 = 0.65 10X = 100 050 = 5.0 065 = 0.65080 = 0.80 045 = 4.5 500 = 5.0 200 = 20.0 080 = 0.80 20X = 200 100 = 10.0 080 = 0.8120 = 1.20 100 = 10.0 999 = 10.0 300 = 30.0 120 = 1.20 200 = 20.0 120 = 1.2
200 = 20.0 300 = 30.0500 = 50.0700 = 70.0
Only available Only available Only available Only available Only availablein Surface Area in Surface Area in Surface Area in Surface Area in Surface Area
A (<200cm2) C (400cm2) C (400cm2) C (400cm2) C (400cm2)
Pore size (Micron)
Dimensions (mm)
A B C1C 1/8" Commpression 94 74 602C 1/8" Commpression 99 74 601Q 1/8"Male Quick Coupling 97 74 602Q 1/4"Male Quick Coupling 102 74 602N 1/4" MNPT 100 74 602H 1/4" Hose Barb 98 74 60LF Female Luer Lock 90 74 60MT 0.5" Tri Clamp 114 74 601H 1/8" Hose Barb 96 74 603H 3/8" Hose Barb 124 74 60
LFE Female Luer Lock Elbow 100 74 602CE 1/8" Commpression Elbow 100 74 601QE 1/8"Male Quick Coupling Elbow 100 74 602QE 1/4"Male Quick Coupling Elbow 100 74 60
SizeFitting Code
Fitting Description
0.5" Tri Clamp by 1.4" Hose Barb with Filling Bell
MT2HFB 135 74 60
Page 25
MKP Series Polyethylene Filter Capsules (PE/PE Construction)
ZenPure Ze
nPur
e
Specification
Materials of Construction: Membrane: Polyethylene Media Supports: High Density Polyethylene (HDPE) Cage, Core, End Caps: HDPE Valve O-Rings: Silicon (Standard) Sealing: Thermally welded
Fitting Connections: See Ordering Guide for the availability. Any inlet/outlet combinations. (Custom adaptors available upon request)
Nominal Dimensions: Lengths: 3.9 in. (99 mm) - dependent on fitting Diameter: 2.3 in. (60 mm)
Available Ratings: 0.2um to 2.5um (see Ordering Guide)
Operating Conditions: Maximum Forward Differential Pressure: 73 psid (5.0 bar) at 20°C 36 psid (2.5 bar) at 50°C
17 psid (1.2 bar) at 80°C Maximum Reverse Differential Pressure: 44 psid (3.0 bar) at 20°C Maximum Operating Temperature: 80° C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics.
Applications Buffers and Media Fermentation Tank Product Sterilization Venting Bio Bags Pharmaceuticals Vaccines Biologics Gas Filtration Scale up processing
Versatile Small Capsule filter
PureFlo® MKP Series Polyethylene (PE) capsules were designed for small to medium-scale filtration, clarification, and venting applications in the pharmaceu-tical, biotechnology, food and beverage, medical and water industries worldwide. This family of products is particularly suitable for venting applications where the units need to be gamma sterilized with other disposable units for venting. The hydrophobic PE membrane is ideally suited for air, gas and liquid sterilizing applications.
The hydrophobic membrane provides superior flow and pressure-drop characteristics for small tank and bio-bag venting applications. The MKP capsules have a compact design that can incorporate 400 cm2 of filtration material to meet the needs of a wide variety of processes. We are currently offering four different polyethylene media sizes with 15 different fitting options. The units are thermally-sealed. No adhesives , binders, or surfactants are used in the manufacturing process. The units are rinsed with pyrogen-free water to reduce extractables and downtime. All filter capsules are 100% integrity-tested to ensure filter performance each and every time out of the package.
Page 26
Your Local Distributor:
ZenPure
A9.6 Rev 2011.08
MKP Series PE Filter Capsules
ZenPure North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
Specifications (cont.)
Bacterial Retention (for 0.2um membrane): Complete retention of > 107organisms/cm2 of Brevundimonas diminuta in accordance with the current HIMA challenge method-ology (ASTM F838-83). Validation Guide upon request.
Sanitizable: The filters can be gamma sterilized up to 45kGy. Not Autoclavable.
Bacterial Endotoxin: Effluent is non-pyrogenic per USP Bacterial Endotoxin (0.25 EU/ml), determined using Limulus Amebocyte Lysate (LAL) Test.
PureFlo MKP Series PE Filter Capsule (Pharmaceutical grade) Ordering Guide
A B C1C 1/8" Commpression 94 74 602C 1/8" Commpression 99 74 601Q 1/8"Male Quick Coupling 97 74 602Q 1/4"Male Quick Coupling 102 74 602N 1/4" MNPT 100 74 602H 1/4" Hose Barb 98 74 60LF Female Luer Lock 90 74 60MT 0.5" Tri Clamp 114 74 601H 1/8" Hose Barb 96 74 603H 3/8" Hose Barb 124 74 60
LFE Female Luer Lock Elbow 100 74 602CE 1/8" Commpression Elbow 100 74 601QE 1/8"Male Quick Coupling Elbow 100 74 602QE 1/4"Male Quick Coupling Elbow 100 74 60
SizeFitting Code
Fitting Description
0.5" Tri Clamp by 1.4" Hose Barb with Filling Bell
MT2HFB 135 74 60
Dimensions (mm)
PureFlo Capsule Filters
Filter Media Pore size (Micron)
Surface Area Inlet Fitting Outlet Fitting Option
020 = 0 20 A = 200cm2 1C = 1/8" Compression 1C = 1/8" Compression100 = 1 0 B = 300cm2 1H = 1/8" Hose Barb 1H = 1/8" Hose Barb
E = Polyethylene 150 = 1 5 C = 400cm2 1Q = 1/8" Male Quick Coupling 1Q = 1/8" Male Quick Coupling250 = 2 5 D = 500cm2 1QE = 1/8" Male Quick Coupling Elbow
2C = 1/4" Compression2C = 1/4" Compression 2CE = 1/4" Compression Elbow2CE = 1/4" Compression Elbow 2H = 1/4" Hose barbs2H = 1/4" Hose barbs 2H -FB = 1/4" Hose barbs with Filling Bell
2N = 1/4" MNPT 2H -FC = 1/4" Hose barbs with Filling Bell with Cap
2NO = 1/4" MNPT+EP O-Ring 2N = 1/4" MNPT2NO = 1/4" MNPT+EP O-Ring2Q = 1/4" Male Quick Coupling for Metal latch
2QF = 1/4" Female Quick Coupling with Metal latch3H = 3/8" Hose Barb
3H = 3/8" Hose Barb 3H -FB = 3/8" Hose barbs with Filling Bell O-Ring for Quick Coupling
LF = Female Luer Lock 3H -FC = 3/8" Hose barbs with Filling Bell with Cap
LFE = Female Luer Lock Elbow LF = Female Luer Lock MT = 1/2" Tri clamps LFE = Female Luer Lock Elbow -OE = O-ring EPDM
MT = 1/2" Tri clamps -ON = O-ring Nitrile-OV = O-ring Viton
MKP = Pharma grade
-NI = No vent or drain inlet fitting
-NO = NO vent or drain outlet fitting
-ETO = Ethylene oxide sterilization
Example - MKPE Series, Polyethylene, 020um, 500cm2, 1/4" Hose Barb I/O is MKPE020D2H2H
Blank = O-ring Silicon (Standard)
-E = Polyethylene shell and HDPE media support for gamma sterilization
1QE = 1/8" Male Quick Coupling Elbow
-N = No vent or drain fittings
2Q = 1/4" Male Quick Coupling for Metal latch
2QE = 1/4" Male Quick Coupling for Metal latch Elbow
2QE = 1/4" Male Quick Coupling for Metal latch Elbow
2QF = 1/4" Female Quick Coupling with Metal latch
Page 27
ZenPure Ze
nPur
e
1H = 1/8" Hose barbs X X X1NF = 1/8" FNPT X X2C = 1/4" Compression X2H = 1/4" to 1/2" Hose barbs, 1/4" Hose barb X X X2HS = 1/4" to 3/8" Hose barbs X X2LF = Large Female Luer Lock fitting X2N = 1/4" MNPT X X X2NF = 1/4" FNPT X X X2Q = 1/4" Male Quick Coupling for Metal latch X X2QF = 1/4" Female Quick Coupling with Metal latch X X2QFP = 1/4" Female Quick Coupling with Plastic latch (threaded on) X X X2QP = 1/4" Male Quick Coupling for Plastic latch X X3C = 3/8" Compression X3H = 3/8" Hose Barb X X3HE = 3/8" Hose Barb Elbow X X3NF = 3/8" FNPT X X X4C = 1/2" Compression X4H = 1/2" Hose Barb X X4N = 1/2" MNPT X X X4QP = 1/2" Male Quick Coupling for Plastic latch X XMT = 1/2" Tri clamps X X XTC = 1-1/2" Tri clamp X X X
Option: Plugged and Cut off Vent and/or Drains
SK Capsule Vent and Drain options
Inlet/Outlet Fittings Luer Lock
(SKL) Bleed Valve
(SKV)M8 Plug (SKP)
Compression (SKP)
M8 Plug Luer Lock Bleed valveMMM888 PPll Compression
SK Capsule Series Vent Options Note—Not available on every Inlet/Outlet fitting
SKP SKL SKV SKP
Page 28
ZenPure ZenPure SKV Series Capsule Size & Fitting Options
ZenP
ure
Page 29
ZenPure ZenPure SKL Series Capsule Size & Fitting Options
ZenP
ure
Page 30
ZenPure
This page left blank intentionally
ZenP
ure
Page 31
SKV Series PES Filter Capsules (PES/PP Construction)
ZenPure Ze
nPur
e
Pharmaceutical Capsule filter
The PureFlo® SKV Series PES filter capsule with all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as com-pared to other membrane capsules. The PureFlo® PES filter capsules have been specially designed for steriliz-ing in biopharmaceutical applications. The hydro-philic PES membrane does not require pre-wetting agents, thereby eliminating a potential source of contamination. The PES membrane is a low protein-binding media.
The capsules were designed with built-in bleed valves for simple and efficient evacuation of air and liquid. The units are used for filtration of small to medium volumes used in production, laboratory and pilot runs. No adhesives, binders, or surfactants are used in the manufacturing process of these capsules. They are rinsed with pyrogen-free water to reduce extractables and downtime. All filter capsules are 100% integrity-tested to ensure filter performance each and every time out of the package. PureFlo SKV Series PES filter capsules are well-suited for pharmaceutical applications where superior flow and bacterial retention is required. The capsule can be ordered pre-sterilized.
Applications Buffers and Media Fermentation Broths Product Sterilization SVP (Small Volume Par-
enterals) Bio Bags Pharmaceuticals Vaccines Biologics Antibiotics Scale up processing Water Serums Specifications
Materials of Construction: Media: PES (Polyethersulfone) Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene Valve O-Rings: Silicon (Standard); Sealing: Thermally welded
Fitting Connections: See ordering guide for the availability. Any inlet/outlet combinations. (Custom adaptors available upon request)
Nominal Dimensions: Lengths: 1.5 in (68 mm), 2.5 in (98 mm),5.0 in (153mm), 7.5 in (251mm), 10 in (281mm) Diameter: 2.88 in (73 mm)
Effective Filtration Area: 1.5in: 0.77 ft2 (720 cm2), 2.5in: 1.48 ft2 (1380 cm2), 5.0in: 2.8 ft2 (2600 cm2), 7.5in: 4.3ft2 (3980cm2), 10in: 5.6 ft2 (5200 cm2) Operating Conditions: Maximum Forward Differential Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 5 bar (72psi) at 68°F/20°C Maximum Reverse Differential Pressure: 3.0 bar (44psi) at 68°F/20°C
Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Page 32
Your Local Distributor:
ZenPure
A9.7 Rev 2011.08
SKV Series PES Filter Capsules
ZenPure
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
SPECIFICATIONS (cont.)
Bacterial Retention: Complete retention of > 107organisms/cm2 of Brevundimonas diminuta inaccordance with the current HIMA challenge methodology (ASTM F838-83). Validation Guide upon request.
Autoclavable & Sanitizable: Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Cap-sules must not be in situ steam-sterilized.
Water Bubble Point Specification: 0.1um: 23psi, 0.16 MPa (IPA) 0.2um: 50psi, 0.34 MPa
Bacterial Endotoxin: Effluent is non-pyrogenic per USP Bacterial Endotoxin (0.25 EU/ml), deter-mined using Limulus Amebocyte Lysate (LAL) Test.
0
5
10
15
0
0 2
0.4
0 6
0 8
1
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo Mini PES (1.5" - H) Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
0.1
0.2
1.5 Tri Clamp f ttings
0
2
4
6
8
10
0
0 08
0.16
0 24
0 32
0.4
0.48
0 56
0 64
0 0 5 1 1.5 2 2.5 3 3.5 4
0 5 10 15
PureFlo Mini PES (2.5" - S) Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
0.1
0.2
1.5 Tri Clamp f ttings
0
2
4
6
8
10
0
0 08
0.16
0 24
0 32
0.4
0.48
0 56
0 64
0 0 5 1 1.5 2 2.5 3 3.5 4
0 5 10 15
PureFlo Mini PES (5" - L) Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
0.1
0.2
1.5 Tri Clamp f ttings
Note - Graphs based on Sanitary fittings.
PureFlo Capsule Filters Filter Media Pore size
(Micron)
Internal Filter
LengthSKV S = PES 004 = 0 04 H = 1.5" 1H = 1/8" Hose Barbs 1H = 1/8" Hose Barbs O-Ring for Quick
010 = 0.1 S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT -OE = O-ring EPDM020 = 0 2 L = 5" 1Q = 1/8" Male Quick Coupling with Metal Latch 1Q = 1/8" Male Quick Coupling with Metal Latch -ON = O-ring Nitrile045 = 0.45 E = 7.5" 1QF = 1/8" Female Quick Coupling with Metal Latch 1QF = 1/8" Female Quick Coupling with Metal Latch -OV = O-ring Viton065 = 0 65 K = 10" 2H = 1/4" Hose Barbs 2H = 1/4" Hose Barbs080 = 0 8 2N = 1/4" MNPT 2N = 1/4" MNPT120 = 1 2 2NF = 1/4" FNPT 2NF = 1/4" FNPT
2Q = 1/4" Male Quick Coupling for Metal Latch 2Q = 1/4" Male Quick Coupling for Metal Latch -FB = Filling Bell*2QF = 1/4" Female Quick Coupling with Metal Latch 2QF = 1/4" Female Quick Coupling with Metal Latch -FC = Filling Bell with Cap*2QFP = 1/4" Female Quick Coupling w/Plastic Latch 2QFP = 1/4" Female Quick Coupling w/Plastic Latch2QP = 1/4" Male Quick Coupling for Plastic Latch 2QP = 1/4" Male Quick Coupling for Plastic Latch3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3NF = 3/8" FNPT 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri-clamps MT = 1/2" Tri-clampsTC = 1-1/2" Tri-clamp TC = 1-1/2" Tri-clamp
-NI = No vent or drain inlet fitting Silicon O-Rings for Bleed
Valve and Quick Coupling fittings
-NO = No vent or drain Outlet fitting
Example - PureFlo SKV Series Capsule, PES , 2.5" internal filter, 0.2 micron, with 1 5" Tri-Clamp fittings I/O, w/PP Construction, would be SKVS020STCTC
Note Quick Couplings are molded on. Female Quick Coupling with Plastic latch will be threaded on. Compatible with CPC (Colder), LinkTech and others. * - 2H or 3H with fil ing bell only
Option
Blank = Polypro construction
-E = Polyethylene shell and HDPE media support for gamma sterilization
-GP = Gamma stable polypropylene shell -G(pore Size)= Glass Fiber
PreFilter
70mm Diameter Capsule with Bleed
Valve
-P(pore Size)= PolyPro Media PreFilter-ETO = Ethylene oxide
sterilization -S(pore Size) = PES PreFilter-N= No vent or drain
fittings
Input Fitting
Blank = O-ring Silicon (Standard)
Output Fitting
PureFlo SKV Series PES Filter Capsule (Pharmaceutical grade) Ordering Guide
Page 33
SKV Series PES Filter Capsules (PES/PE Construction)
ZenPure Ze
nPur
e
Pharmaceutical Capsule filter
The PureFlo® SKV Series PES filter capsule with all-polyethylene (PE) construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane capsules. These PureFlo® PES filter cap-sules with Polyethylene construction have been specially designed to be gamma sterilized for biopharmaceutical applications. The PES and the PE construction are naturally Gamma radiation staple. The hydrophilic PES membrane does not require pre-wetting agents, thereby eliminating a potential source of contamination. The PES membrane is a low protein-binding media.
The capsules were designed with built-in bleed valves for simple and efficient evacuation of air and liquid. The units are used for filtration of small to medium volumes used in production, laboratory and pilot runs. No adhesives, binders, or surfactants are used in the manufacturing process of these capsules. They are rinsed with pyrogen-free water to reduce extractables and downtime. All filter capsules are 100% integrity-tested to ensure filter performance each and every time out of the package. PureFlo SKV Series PES filter capsules are well-suited for pharmaceutical applications where gamma sterilization is needed.
Applications Buffers and Media Fermentation Broths Product Sterilization SVP (Small Volume Par-
enterals) Bio Bags Pharmaceuticals Vaccines Biologics Antibiotics Scale up processing Water Serums
Specifications Materials of Construction: Media: PES (Polyethersulfone) Media Supports: High Density Polyethylene (HDPE) Cage, Core, End Caps: HDPE Valve O-Rings: Silicon (Standard); Sealing: Thermally welded
Fitting Connections: See ordering guide for the availability. Any inlet/outlet combinations. (Custom adaptors available upon request)
Nominal Dimensions: Lengths: 1.5 in (68mm), 2.5 in (98mm), 5.0 in (153mm), 7.5 in (251mm), 10 in (281mm) Diameter: 2.88 in (73 mm)
Effective Filtration Area: 1.5in: 0.77 ft2 (720 cm2), 2.5in: 1.48 ft2 (1380 cm2), 5.0in: 2.8 ft2 (2600 cm2), 7.5in: 4.3ft2 (3980cm2), 10in: 5.6 ft2 (5200 cm2)
Operating Conditions: Maximum Forward Differential Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 5 bar (72psi) at 68°F/20°C Maximum Reverse Differential Pressure: 3.0 bar (44psi) at 68°F/20°C
Maximum Operating Temperature: 140°F/60°C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Page 34
Your Local Distributor:
ZenPure
A9.8 Rev 2011.08
Series PES Filter Capsules (PES/PE Construction)
ZenPure
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
Specifications (cont.)
Bacterial Retention: Complete retention of > 107organisms/cm2 of Brevundimonas diminuta inaccordance with the current HIMA challenge methodology (ASTM F838-83). Validation Guide upon request.
Sanitizable: The filters can be Gamma sterilized up to 45kGy. The filters can also be chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Not Autoclavable.
Water Bubble Point Specification: 0.1um: 23psi, 0.16 MPa (IPA) 0.2um: 50psi, 0.34 MPa
Bacterial Endotoxin: Effluent is non-pyrogenic per USP Bacterial Endotoxin (0.25 EU/ml), deter-mined using Limulus Amebocyte Lysate (LAL) Test.
0
5
10
15
0
0 2
0.4
0 6
0 8
1
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo Mini PES (1.5" - H) Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
0.1
0.2
1.5 Tri Clamp f ttings
0
2
4
6
8
10
0
0 08
0.16
0 24
0 32
0.4
0.48
0 56
0 64
0 0 5 1 1.5 2 2.5 3 3.5 4
0 5 10 15
PureFlo Mini PES (2.5" - S) Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
0.1
0.2
1.5 Tri Clamp f ttings
0
2
4
6
8
10
0
0 08
0.16
0 24
0 32
0.4
0.48
0 56
0 64
0 0 5 1 1.5 2 2.5 3 3.5 4
0 5 10 15
PureFlo Mini PES (5" - L) Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
0.1
0.2
1.5 Tri Clamp f ttings
Note - Graphs based on Sanitary fittings.
PureFlo Capsule Filters Filter Media Pore size
(Micron)
Internal Filter
LengthSKV S = PES 004 = 0.04 H = 1.5" 1H = 1/8" Hose Barbs 1H = 1/8" Hose Barbs O-Ring for Quick
010 = 0.1 S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT -OE = O-ring EPDM020 = 0.2 L = 5" 1Q = 1/8" Male Quick Coupling with Metal Latch 1Q = 1/8" Male Quick Coupling with Metal Latch -ON = O-ring Nitrile045 = 0.45 E = 7.5" 1QF = 1/8" Female Quick Coupling with Metal Latch 1QF = 1/8" Female Quick Coupling with Metal Latch -OV = O-ring Viton065 = 0.65 K = 10" 2H = 1/4" Hose Barbs 2H = 1/4" Hose Barbs080 = 0.8 2N = 1/4" MNPT 2N = 1/4" MNPT120 = 1.2 2NF = 1/4" FNPT 2NF = 1/4" FNPT
2Q = 1/4" Male Quick Coupling for Metal Latch 2Q = 1/4" Male Quick Coupling for Metal Latch -FB = Filling Bell*2QF = 1/4" Female Quick Coupling with Metal Latch 2QF = 1/4" Female Quick Coupling with Metal Latch -FC = Filling Bell with Cap*2QFP = 1/4" Female Quick Coupling w/Plastic Latch 2QFP = 1/4" Female Quick Coupling w/Plastic Latch2QP = 1/4" Male Quick Coupling for Plastic Latch 2QP = 1/4" Male Quick Coupling for Plastic Latch3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3NF = 3/8" FNPT 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri-clamps MT = 1/2" Tri-clampsTC = 1-1/2" Tri-clamp TC = 1-1/2" Tri-clamp
-NI = No vent or drain inlet fitting Silicon O-Rings for Bleed
Valve and Quick Coupling fittings
-NO = No vent or drain Outlet fitting
Example - PureFlo SKV Series Capsule, PES , 2.5" internal filter, 0.2 micron, with 1.5" Tri-Clamp fittings I/O, w/PE Construction, would be SKVS020STCTC-E
Note: Quick Coup ings are molded on. Female Qu ck Coupling with Plast c latch wi l be threaded on. Compatible with CPC (Co der), LinkTech and others. * - 2H or 3H with f lling bell only
Option
Blank = Polypro construction
-E = Polyethylene shell and HDPE media support for gamma sterilization
-GP = Gamma stable polypropylene shell -G(pore Size)= Glass Fiber
PreFilter
70mm Diameter Capsule with Bleed
Valve
-P(pore Size)= PolyPro Media PreFilter-ETO = Ethylene oxide
sterilization -S(pore Size) = PES PreFilter-N= No vent or drain
fittings
Input Fitting
Blank = O-ring Silicon (Standard)
Output Fitting
PureFlo SKV Series PES Filter Capsule (Pharmaceutical grade) Ordering Guide
Page 35
PureFlo® PES Filter Capsules High performance encapsulated Pharmaceutical grade PES Filter
ZenPure Ze
nPur
e
The PureFlo® PES filter capsule in its all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane capsules. PureFlo® PES Filter Capsules have been specially designed for sterilizing in biopharmaceutical applications. Its hydrophilic PES membrane does not require pre-wetting agents, thereby eliminating a potential source of contamination. The PES membrane is low protein-binding.
The capsules were designed for simple and efficient filtration of small volumes used in low-flow application, laboratory, and pilot runs. No adhesives, binders, or surfactants are used in the manufacturing process of these capsules. They are rinsed with pyrogen-free water to reduce extractables and downtime. All filter capsules are 100% integrity-tested to ensure filter performance each and every time out of the package. PureFlo PES filter capsules are well-suited for pharmaceutical applications where superior flow and bacterial retention is required. The capsule can be ordered pre-sterilized.
SPECIFICATIONS
Regulatory Compliance Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological test for Plastics
Bacterial Retention Complete retention of > 107organisms/cm2 of Bre-vundimonas diminuta in accordance with the current HIMA challenge methodology (ASTM F838-83). Validation Guide upon request.
Autoclavable & Sanitizable:Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and tempera-ture). Capsules must not be in situ steam-sterilized.
Water Bubble Point Specification 0.1um : 23psi,0.16 MPA (IPA) 0.2um : 47psi,0.32 MPa
Bacterial Endotoxin Effluent is non-Pyrogenic per USP Bacterial En-dotoxin (0.25 EU/ml), determined using Limulus Amebocyte Lysate (LAL) test.
Applications Culture Media Fermentation Broths Serums SVP (Small volume
parenterals)
Vaccines Product Sterilization
Reagents & Buffers Biologics Antibiotics Beverages WFI-POU Scale-up processes
Features Benefits ■ Hydrophilic PES Membrane ■ Inherently hydrophilic for cleaner filtrates
■ High flow rate reduces processing time ■ Low protein-binding membrane maximizing yields ■ Biologically inert membrane ■ Bacterial retentive to produce sterile solutions
■ Small, Compact Design ■ Simple, quick, and efficient filtration ■ Low hold-up volume reduces product waste
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during manufacturing resulting in superior downstream cleanliness
■ All capsules are rinsed with pyrogen-free water
SKL Capsules
Page 36
ZenPure PureFlo® PES Filter Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B10 Rev 2011.08
PureFlo PES Filter Capsule (Pharmaceutical grade) Ordering Guide
Materials of Construction Membrane: Hydrophilic Polyethersulfone Membrane Supports: Polypropylene or PET Cage, Core, End Caps: Polypropylene or Polyethylene option
Fitting Connections NPT, Sanitary Flange, Hose Barb, Coupling Vent/Drain - Luer Lock, Plug, Bleed Valve
Dimensions (Nominal) Length: 1.5 in (68 mm) Length: 2.5 in (98 mm) Length: 5.0 in (153 mm) Length: 7.5 in (251 mm) Length: 10 in (281mm) Diameter: 2.88 in (73 mm)
Effective Filtration Area 1.5 in - 0.77 ft2 (720 cm2) 2.5 in - 1.48 ft2 (1380 cm2) 5.0 in - 2.8 ft2 (2600 cm2) 7.5 in - 4.3 ft2 (3980 cm2) 10 in - 5.6 ft2 (5200 cm2)
Operating Conditions Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 5 bar (72psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C
Note - Graphs based on Sanitary fittings.
0
5
10
15
0
0.2
0.4
0.6
0.8
1
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo Mini PES (1.5" - H) Capsule
GPM
BarPSID
LPM
Dffe
rent
a
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.1
0.2
1 5 Tri Clamp fittings
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3 3.5 4
0 5 10 15
PureFlo Mini PES (2.5" - S) Capsule
GPM
BarPSID
LPM
Dffe
rent
a
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.1
0.2
1 5 Tri Clamp fittings
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3 3.5 4
0 5 10 15
PureFlo Mini PES (5" - L) Capsule
GPM
BarPSID
LPM
Dffe
rent
a
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.1
0.2
1 5 Tri Clamp fittings
PureFlo Capsule Filters
Vent & Drain Fitting
Filter Media Pore size (Micron) Length
004 = 0.04um H = 1.5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbs O-Ring for Quick SK S = PES 010 = 0.1um S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT -OE = O-ring EPDM
020 = 0.2um L = 5" 1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latch -ON = O-ring Nitrile050= 0.45um E = 7.5" 1QF = 1/8" Female Quick Coupling w/ Metal latch 1QF = 1/8" Female Quick Coupling w/ Metal latch -OV = O-ring Viton065 = 0.65um K = 10" 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs080 = 0.8um 2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs120 =1.2um 2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting -NY = Nylon Construction
2N = 1/4" MNPT 2N = 1/4" MNPT -FB = Filling bell2NF = 1/4" FNPT 2NF = 1/4" FNPT -FC = Filling bell with Cap2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling w/ Metal latch 2QF = 1/4" Female Quick Coupling w/ Metal latch2QFP = 1/4" Female Quick Coupling w/ Plastic latch 2QFP = 1/4" Female Quick Coupling w/ Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
Output Fitting Options
L = Female Luer Lock
-P(pore Size)=PolyPro Media PreFilter
Input Fitting
-PH = Pharma Grade
Example - Capsule, Luer Lock V/D, 2.5" Internal filter, 0.2 micron PES Capsule, Pharma Grade, with 1.5" Tri-Clamp fittings would be SKLS020STCTC-PH
70mm Diameter Capsule
-E = Polyethylene shell and HDPE media support for gamma sterilization
Blank = O-ring Silicon (Standard)
-GP = Gamma stable polypropylene shell
P = M8 Threaded Plug - Limited options
-G(pore Size)= Glass Fiber PreFilter
-ETO = Ethylene oxide sterilization -S(pore Size) = PES
PreFilter
-NO = NO vent or drain Outlet fitting
-NI = No vent or drain inlet fitting
Quick Couplings are mo ded, Fema e Qu ck Coup ing with Plastic latch wi l be threaded on, compatible with CPC (Colder), LinkTech and others.
N = No vent or drain fittings
Page 37
PureFlo® Biological Reduction Grade Capsules A High performance encapsulated PES membrane filter
ZenPure Ze
nPur
e
The PureFlo® Biological Reduction Grade filter capsule in its all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane capsules. PureFlo® Biological grade capsules have been designed for bioreduction in pharmaceutical appli-cations. Its hydrophilic PES membrane does not require pre-wetting agents, thereby eliminating a potential source of con-tamination. The PES membrane is low protein-binding.
The capsules were designed for simple and efficient filtration of small volumes used in low-flow application, laboratory, and pilot runs. No adhesives, binders, or surfactants are used in the manufacturing process of these capsules. They are rinsed with pyrogen-free water to reduce extractables and downtime. All filter capsules are 100% integrity tested to ensure filter performance each and every time out of the package. PureFlo PES filter capsules are well-suited for pharmaceutical applications where superior flow and bacterial retention is required.
SPECIFICATIONS Regulatory Compliance
Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics
Autoclavable & Sanitizable Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Water Bubble Point Specification 0.1um : 23psi (IPA) 0.2um : 47psi 0.45um: 33psi
Bacterial Endotoxin Effluent is non-pyrogenic per USP Bacterial Endotoxin (0.25 EU/ml), determined using
Applications Culture media Fermentation Broths Serums SVP (Small volume
parenterals) Vaccines Bio Reduction
Reagents & Buffers Biologics Antibiotics Beverages WFI-POU Scale-up processes
Features Benefits ■ Hydrophilic PES Membrane ■ Inherently hydrophilic for cleaner filtrates
■ High flow rate reduces processing time ■ Low protein-binding membrane maximizing yields ■ Biologically inert membrane ■ Bacterial retentive to produce sterile solutions
■ Small Compact Design ■ Simple, quick, and efficient filtration ■ Low hold-up volume reduces product waste
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during manufacturing re-sulting in superior downstream cleanliness
■ All capsules are rinsed with pyrogen-free water
Page 38
ZenPure PureFlo® Biological Reduction Grade Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B10.5 Rev 2011.08
Materials of Construction Membrane: Hydrophilic Polyethersulfone Membrane Supports: Polypropylene, or PET Cage, Core, End Caps: Polypropylene, or Polyethylene option
Fitting Connections NPT, Sanitary Flange, Hose Barb, Couplings Vent/Drain - Luer Lock with Cap
Dimensions (nominal) Length: 1.5 in (68 mm) Length: 2.5 in (98 mm) Length: 5.0 in (153 mm) Length: 7.5 in (251 mm) Length: 10 in (281mm) Diameter: 2.88 in (73 mm)
Effective Filtration Area 1.5 in - 0.77 ft2 (720 cm2) 2.5 in - 1.48 ft2 (1380 cm2) 5.0 in - 2.8 ft2 (2600 cm2) 7.5 in - 4.3 ft2 (3980 cm2) 10 in - 5.6 ft2 (5200 cm2)
Operating Conditions Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C
0
5
10
15
0
0 2
0 4
0 6
0 8
1
0 0 5 1 1 5 2 2 5 3
0 2 4 6 8 10
PureFlo Mini PES (1.5" - H) Capsule
GPM
BarPSID
LPM
Dffe
rent
a
Pres
sure
Flow Rate @22°C 1cP Fluid
0 65
0 04
0 1
0 2
0 45
1 20 8
1.5" Tri Clamp fittings
0
2
4
6
8
10
0
0 08
0 16
0 24
0 32
0 4
0 48
0 56
0 64
0 0 5 1 1 5 2 2 5 3 3 5 4
0 5 10 15
PureFlo Mini PES (2.5" - S) Capsule
GPM
BarPSID
LPM
Dffe
rent
a
Pres
sure
Flow Rate @22°C 1cP Fluid
0 65
0 04
0 1
0 2
0 45
1 20 8
1.5" Tri Clamp fittings
0
2
4
6
8
10
0
0 08
0 16
0 24
0 32
0 4
0 48
0 56
0 64
0 0 5 1 1 5 2 2 5 3 3 5 4
0 5 10 15
PureFlo Mini PES (5" - L) Capsule
GPM
BarPSID
LPM
Dffe
rent
a
Pres
sure
Flow Rate @22°C 1cP Fluid
0 65
0 040 1
0 2
0 45
1 20 8
1.5" Tri Clamp fittings
Note - Graphs based on Sanitary fittings.
PureFlo Capsule Filters
Vent & Drain Fitting
Filter Media
Pore size (Micron) Length
004 = 0.04um H = 1.5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbs O-Ring for Quick SK S = PES 010 = 0.1um S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT -OE = O-ring EPDM
020 = 0.2um L = 5" 1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latch -ON = O-ring Nitrile050= 0.45um E = 7.5" 1QF = 1/8" Female Quick Coupling w/ Metal latch 1QF = 1/8" Female Quick Coupling w/ Metal latch -OV = O-ring Viton065 = 0.65um K = 10" 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs080 = 0.8um 2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs120 =1.2um 2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting -NY = Nylon Construction
2N = 1/4" MNPT 2N = 1/4" MNPT -FB = Filling bell2NF = 1/4" FNPT 2NF = 1/4" FNPT -FC = Filling bell with Cap2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling w/ Metal latch 2QF = 1/4" Female Quick Coupling w/ Metal latch2QFP = 1/4" Female Quick Coupling w/ Plastic latch 2QFP = 1/4" Female Quick Coupling w/ Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
-E = Polyethylene shell and HDPE media support for gamma sterilization
Example - Capsule, Luer Lock V/D, 2.5" Internal filter, 0.2 micron PES Capsule, Biological Reduction Grade, with 1.5" Tri-Clamp fittings would be SKLS020STCTC-B
Quick Couplings are molded Female Quick Coupling with Plastic latch wi l be threaded on compatible with CPC (Colder) LinkTech and others.
70mm Diameter Capsule -GP = Gamma stable
polypropylene shellBlank = O-ring Silicon (Standard)N = No vent or
drain fittings -G(pore Size)= Glass Fiber PreFilter
-P(pore Size)= PolyPro Media PreFilter-ETO = Ethylene oxide
sterilization -S(pore Size) = PES PreFilter
Input Fitting Output Fitting Options
L = Female Luer Lock -B = Biological Reduction
GradeP = M8 Threaded Plug - Limited options
-NI = No vent or drain inlet fitting
-NO = NO vent or drain Outlet fitting
PureFlo PES Filter Capsule (Biological Grade) Ordering Guide
Page 39
PureFlo® PES Filter Capsules
ZenPure Ze
nPur
e
PureFlo® PES Filter Capsules have been specially designed for simple, quick, and efficient filtration of fluids and gases used in laboratory, pilot, and small-scale applications. The PES membrane in an all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane cartridges. No adhesives, binders, or surfactants are used in the manufacturing process and all capsules are rinsed with high-purity water to reduce extractables and downtime.
The hydrophilic PES membrane does not require pre-wetting with IPA and flushing with DI water, thereby eliminating a potential source of contamination and hazardous waste. In addition, unlike hydrophobic filters such as PTFE the hydrophilic membrane reduces the potential for bubble formation by not de-wetting in out-gassing fluids.. All filter capsules are 100% integrity tested to ensure filter performance each and every time out of the package. PureFlo PES filter capsules are well-suited for applications where superior flow and particle removal efficiency at 0.04, 0.1, 0.2, 0.45, 0.65, 0.80 and 1.2 micron is required.
Materials of Construction Membrane: Hydrophilic Polyethersulfone Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene Fitting Connections: NPT, Compression, Sanitary Flange, Hose Barb
Nominal Dimensions Length: 1.5 in (68 mm) Length: 2.5 in (98 mm) Length: 5.0 in (153 mm) Length: 7.5 in (251 mm) Length: 10 in (281mm) Diameter: 2.88 in (73 mm)
Effective Filtration Area 1.5 in 0.77 ft2 (720 cm2) 2.5 in 1.48 ft2 (1380 cm2) 5.0 in 2.8 ft2 (2600 cm2) 7.5 in 4.3 ft2 (3980 cm2) 10 in - 5.6 ft2 (5200 cm2)
Operating Conditions Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 5 bar (72psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C
Autoclavable & Sanitizable Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and tem-perature). Capsules must not be in situ steam-sterilized.
Applications Acids Ink Jets
Bases Beverages
Solvents Pharmaceuticals
Fine Chemicals Biologics Plating Solutions Dyes
Process Water Lacquers
Features Benefits ■ Hydrophilic PES Membrane ■ IPA pre-wetting not required – thereby eliminating a potential source of
contamination and disposal waste ■ Economic alternative to PTFE
■ Fully Disposable Capsule ■ Rapid installation ■ Reduced downtime ■ Reduced handling of hazardous chemicals
■ Small Compact Design ■ Simple, quick, and efficient filtration ■ Low hold-up volume reduces the chemical waste ■ Reduced chemical handling and hazardous waste disposal
■ Low Filter Extractables ■ No adhesives, binders, or surfactants used ■ Capsules are rinsed with high-purity water
Regulatory Compliance Manufactured from materials that conform to the require-ments of 21CFR Part 177 of the U.S. Code of Federal Regu-lations and USP Class VI Biological Test for Plastics.
Page 40
ZenPure PureFlo® PES Filter Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B11 Rev 2011.08
PureFlo PES Filter Capsule Ordering Guide
Note - Graphs based on Sanitary fittings.
1H = 1/8" Hose barbs Luer Lock1NF = 1/8" FNPT Luer Lock2C = 1/4" Compression 1/4" Comp2H = 1/4" to 1/2" Hose barbs Luer Lock2HS = 1/4" to 3/8" Hose barbs Luer Lock2L = Large Female Luer Lock fitting Luer Lock2N = 1/4" MNPT Luer Lock2NF = 1/4" FNPT Luer Lock2Q = 1/4" Male Quick Coupling Luer Lock2QF = 1/4" Female Quick Coupling Luer Lock2QFP = 1/4" Female Quick Coupling with Plastic latch Luer Lock2QP = 1/4" Male Quick Coupling for Plastic latch Luer Lock3C = 3/8" Compression 1/4" Comp3H = 3/8" Hose Barb (future) Luer Lock3HE = 3/8" Hose Barb Elbow Luer Lock3NF = 3/8" FNPT Luer Lock4C = 1/2" Commpression 1/4" Comp4H = 1/2" Hose Barb (future) Luer Lock4N = 1/2" MNPT Luer Lock4QP = 1/2" Male Quick Coupling for Plastic latch Luer LockMT = 0.5" Tri clamps Luer LockTC = 1-1/2" Tri clamp Luer Lock
Inlet/Outlet Fittings Vent and
Drain fittings
Option: Plugged and Cut off Vent and/or Drains
0
1
2
3
4
5
6
7
8
0
0.1
0.2
0.3
0.4
0.5
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 1.5" PES Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.040.1
0.20.45
0.65
1.20.8
0
1
2
3
4
5
0
0.04
0.08
0.12
0.16
0.2
0.24
0.28
0.32
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 2.5" PES Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.04 0.1
0.20.45
0.651.2
0.8
0
0.5
1
1.5
2
2.5
3
0
0.05
0.1
0.15
0.2
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 5.0" PES Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.040.1
0.20.45
0.651.2
0.8
PureFlo Capsule Filters
Vent & Drain Fitting Filter Media Pore size
(Micron) Length
004 = 0.04um H = 1.5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSK S = PES 010 = 0.1um S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT
020 = 0.2um L = 5" 1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latch -NY = Nylon Construction -OE = O-ring EPDM050= 0.45um E= 7.5" 1QF = 1/8" Female Quick Coupling w/ Metal latch 1QF = 1/8" Female Quick Coupling w/ Metal latch -FB = Filling bell -ON = O-ring Nitrile065 = 0.65um K = 10" 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs -FC = Filling bell with Cap -OV = O-ring Viton080 = 0.8um 2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs120 =1.2um 2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting
2N = 1/4" MNPT 2N = 1/4" MNPT2NF = 1/4" FNPT 2NF = 1/4" FNPT2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling w/ Metal latch 2QF = 1/4" Female Quick Coupling w/ Metal latch2QFP = 1/4" Female Quick Coupling w/ Plastic latch 2QFP = 1/4" Female Quick Coupling w/ Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
P = M8 Threaded Plug - Limited options
70mm Diameter Capsule
-S(pore Size) = PES PreFilter
Input Fitting Output Fitting Options
L = Female Luer Lock
-G(pore Size)= Glass Fiber PreFilter
N = No vent or drain fittings
-NO = NO vent or drain Outlet fitting
Blank = O-ring Silicon (Standard)
-P(pore Size)= PolyPro Media PreFilter
Example - Capsule, Luer Lock V/D, 2.5" Internal filter, 0.2 micron PES Capsule, Standard Grade, with 1.5" Tri-Clamp fittings would be SKLS020STCTC
Quick Couplings are molded, Female Quick Coupling with Plastic latch will be threaded on, compatible with CPC (Colder), LinkTech and others.
-GP = Gamma stable polypropylene shell
-ETO = Ethylene oxide sterilization
-NI = No vent or drain inlet fitting
-E = Polyethylene shell and HDPE media support for gamma sterilization
O-Ring for Quick Coupling
PreFilters
Page 41
SKV Series PTFE Filter Capsules (PTFE/ PP Construction)
ZenPure Ze
nPur
e
Pharmaceutical Capsule filter
The PureFlo® SKV Series PTFE filter capsule with all-polypropylene or polyethylene construction provides a excellent compatibility and superior flow per unit area. The SKV capsules were designed with built-in bleed valves for simple and efficient evacuation of air and liquid from the upstream side.
The hydrophobic PTFE membrane is ideally suited for sterilizing in biopharmaceutical applications in aggres-sive chemicals, air and gas. In addition, the hydropho-bic membrane provides superior flow and pressure-drop characteristics for tank venting applications. PureFlo PTFE filter capsules are well-suited for critical applications where superior flow and bacterial reten-tion is required.
The units are used for filtration of small to medium volumes used in production, laboratory and pilot runs. No adhesives, binders, or surfactants are used in the manufacturing process of these capsules. They are rinsed with pyrogen-free water to reduce extractables and downtime. All filter capsules are 100% integrity-tested to ensure filter performance each and every time out of the package. The capsule can be ordered pre-sterilized.
Applications Buffer and Media Fermentation Tanks Product Sterilization SVP (Small Volume
Parenterals) Bio Bags Pharmaceuticals Gas filtration Biologics Antibiotics Venting Water Serums
Specifications Materials of Construction: Media: Hydrophobic PTFE (polytetrafluoroethylene) Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene Valve O-Rings: Silicon (Standard); Sealing: Thermally welded
Fitting Connections: See ordering guide for the availability. Any inlet/outlet combinations. (Custom adaptors available upon request)
Nominal Dimensions: Lengths: 1.5 in (68 mm), 2.5 in (98 mm),5.0 in (153mm), 7.5 in (251 mm), 10 in (281mm) Diameter: 2.88 in (73 mm)
Effective Filtration Area: 1.5 in - 0.77 ft2 (650 cm2), 2.5 in - 1.48 ft2 (1250 cm2), 5.0 in - 2.8 ft2 (2400 cm2), 7.5 in - 4.3ft2 (3980 cm2), 10 in - 5.6 ft2 (4800 cm2)
Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Maximum Forward Differential Pressure: 5.0 bar (72psi) at 68°F/20°C Maximum Reverse Differential Pressure: 3.0 bar (44 psi) at 68°F/20°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C
Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Page 42
Your Local Distributor:
ZenPure
B11.5 Rev 2011.08
SKV Series PTFE Filter Capsules
ZenPure
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
Specifications(continued)
Bacterial Retention (for 0.2um membrane):
Complete retention of > 107organisms/cm2 of Brevundimonas diminuta inaccordance with the current HIMA challenge methodology (ASTM F838-83). Validation Guide upon request.
Autoclavable & Sanitizable: Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Bacterial Endotoxin: Effluent is non-pyrogenic per USP Bacterial Endotoxin (0.25 EU/ml), deter-mined using Limulus Amebocyte Lysate (LAL) Test.
Note - Graphs based on Sanitary fittings.
PureFlo Capsule Filters Filter Media Pore size
(Micron)
Internal Filter
LengthSKV F = PTFE 010 = 0.1 H = 1.5" 1H = 1/8" Hose Barbs 1H = 1/8" Hose Barbs O-Ring for Quick
020 = 0.2 S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT -OE = O-ring EPDM045 = 0.45 L = 5" 1Q = 1/8" Male Quick Coupling with Metal Latch 1Q = 1/8" Male Quick Coupling with Metal Latch -ON = O-ring Nitrile100 = 1.0 E = 7.5" 1QF = 1/8" Female Quick Coupling with Metal Latch 1QF = 1/8" Female Quick Coupling with Metal Latch -OV = O-ring Viton300 = 3.0 K = 10" 2H = 1/4" Hose Barbs 2H = 1/4" Hose Barbs500 = 5.0 2N = 1/4" MNPT 2N = 1/4" MNPT999 = 10.0 2NF = 1/4" FNPT 2NF = 1/4" FNPT
2Q = 1/4" Male Quick Coupling for Metal Latch 2Q = 1/4" Male Quick Coupling for Metal Latch -FB = Filling Bell*2QF = 1/4" Female Quick Coupling with Metal Latch 2QF = 1/4" Female Quick Coupling with Metal Latch -FC = Filling Bell with Cap*2QFP = 1/4" Female Quick Coupling w/Plastic Latch 2QFP = 1/4" Female Quick Coupling w/Plastic Latch2QP = 1/4" Male Quick Coupling for Plastic Latch 2QP = 1/4" Male Quick Coupling for Plastic Latch3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3NF = 3/8" FNPT 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri-clamps MT = 1/2" Tri-clampsTC = 1-1/2" Tri-clamp TC = 1-1/2" Tri-clamp
Example - PureFlo SKV Series Capsule, PTFE , 2.5" internal filter, 0.2 micron, with 1.5" Tri-Clamp fittings I/O, w/PP Construction, would be SKVF020STCTC
Note Quick Couplings are molded on. Female Quick Coup ing with Plastic latch will be threaded on. Compatible with CPC (Colder) LinkTech and others. * - 2H or 3H with filling bell only
-P(pore Size)= PolyPro Media PreFilter-ETO = Ethylene oxide
sterilization -S(pore Size) = PES PreFilter-N= No vent or drain
fittings
-NI = No vent or drain inlet fitting Silicon O-Rings for Bleed
Valve and Quick Coupling fittings
-NO = No vent or drain Outlet fitting
Input Fitting Output Fitting Option
Blank = Polypro construction
70mm Diameter Capsule with Bleed
Valve
-E = Polyethylene shell and HDPE media support for gamma sterilization Blank = O-ring Silicon
(Standard)-GP = Gamma stable polypropylene shell -G(pore Size)= Glass Fiber
PreFilter
PureFlo SKV Series PTFE Filter Capsule (Pharmaceutical grade) Ordering Guide
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 1.5" PTFE Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.1 0.2 0.45
1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 2.5" PTFE Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.1 0.2
0.45
1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 5.0" PTFE Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.1
0.2
0.45
1.0
Page 43
PureFlo® PTFE Filter Capsules
ZenPure Ze
nPur
e
PureFlo® PTFE filter capsules are highly retentive hydrophobic PTFE membrane filters that have been specially designed for critical applications. The PTFE membrane in an all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane capsules. No adhesives, binders, or surfac-tants are used in the manufacturing process.
The hydrophobic PTFE membrane is ideally suited for aggressive chemicals such as acids, bases, and solvents. In addition, the hydrophobic membrane provides superior flow and pressure-drop characteristics per unit area for gas filtration and tank venting applications. All filter capsules are 100% integrity tested to ensure filter performance each and every time out of the package. PureFlo PTFE filter capsules are well-suited for critical applications where superior flow and parti-cle removal efficiency at 0.1 to 10.0 micron is required.
Applications Acids Ink Jets Bases Electronics Solvents Pharmaceuticals Fine Chemicals Venting Plating Solutions Dyes Process Water Lacquers
Features Benefits ■ Naturally Hydrophobic PTFE Membrane ■ High flow rates with low pressure drop per unit area as com-
pared to other filter materials ■ Superior filter lifetime and process throughputs
■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide-range of chemicals such as acids, bases, and solvents
■ No media migration into the process fluid
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during the manufacturing process resulting in superior downstream cleanliness
■ All cartridges are rinsed with high-purity water to reduce extractables and downtime
■ Quality Manufacturing ■ Consistent and reproducible particulate removal
Regulatory Compliance Manufactured from materials that conform to the require-ments of 21CFR Part 177 of the U.S. Code of Federal Regu-lations and USP Class VI Biological Test for Plastic.
Autoclave Cycles 25 times @ 257°F/125°C for 30 minutes Capsules must not be in situ steam-sterilized
Materials of Construction Membrane: Hydrophobic PTFE Membrane Supports: Polypropylene Cage, Core, End Caps, Capsule: Polypropylene Fitting Connections: MNPT, FNPT, Quick Couplings, Compression, Hose Barb, Sanitary Flange
Dimensions (Nominal) Length: 1.5 in (68 mm) Length: 2.5 in (98 mm) Length: 5.0 in (153 mm) Length 7.5 in (251 mm) Length: 10 in (281mm) Diameter: 2.88 in (73 mm)
Effective Filtration Area 1.5 in - 0.65 ft2 (650 cm2) 2.5 in - 1.3 ft2 (1250 cm2) 5.0 in - 2.7 ft2 (2400 cm2) 7.5 in - 4.3ft2 (3980 cm2) 10 in - 5.2 ft2 (4800 cm2)
Operating Conditions Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C
Page 44
ZenPure PureFlo® PTFE Filter Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B12 Rev 2011.08
PureFlo PTFE Filter Cartridge Ordering Guide
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 1.5" PTFE Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.1 0.2 0.45
1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 2.5" PTFE Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.1 0.2
0.45
1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 5.0" PTFE Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.1
0.2
0.45
1.0
Note - Graphs based on Sanitary fittings.
1H = 1/8" Hose barbs Luer Lock1NF = 1/8" FNPT Luer Lock2C = 1/4" Compression 1/4" Comp2H = 1/4" to 1/2" Hose barbs Luer Lock2HS = 1/4" to 3/8" Hose barbs Luer Lock2L = Large Female Luer Lock fitting Luer Lock2N = 1/4" MNPT Luer Lock2NF = 1/4" FNPT Luer Lock2Q = 1/4" Male Quick Coupling Luer Lock2QF = 1/4" Female Quick Coupling Luer Lock2QFP = 1/4" Female Quick Coupling with Plastic latch Luer Lock2QP = 1/4" Male Quick Coupling for Plastic latch Luer Lock3C = 3/8" Compression 1/4" Comp3H = 3/8" Hose Barb (future) Luer Lock3HE = 3/8" Hose Barb Elbow Luer Lock3NF = 3/8" FNPT Luer Lock4C = 1/2" Commpression 1/4" Comp4H = 1/2" Hose Barb (future) Luer Lock4N = 1/2" MNPT Luer Lock4QP = 1/2" Male Quick Coupling for Plastic latch Luer LockMT = 0 5" Tri clamps Luer LockTC = 1-1/2" Tri clamp Luer Lock
Inlet/Outlet Fittings Vent and
Drain fittings
Option: Plugged and Cut off Vent and/or Drains
PureFlo Capsule Filters
Vent & Drain Fitting
Filter Media
Pore size (Micron) Length
010 = 0.1 H = 1.5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSK F = PTFE 020 = 0.2 S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT
045 = 0.45 L = 5" 1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latch -NY = Nylon Construction -OE = O-ring EPDM100 = 1.0 E= 7.5" 1QF = 1/8" Female Quick Coupling w/Metal latch 1QF = 1/8" Female Quick Coupling w/Metal latch -FB = Filling bell -ON = O-ring Nitrile300 = 3.0 K = 10" 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs -FC = Filling bell with Cap -OV = O-ring Viton500 = 5.0 2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs
N = No vent or 999 = 10.0 2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting2N = 1/4" MNPT 2N = 1/4" MNPT2NF = 1/4" FNPT 2NF = 1/4" FNPT2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling w/Metal latch 2QF = 1/4" Female Quick Coupling w/Metal latch2QFP = 1/4" Female Quick Coupling w/Plastic latch 2QFP = 1/4" Female Quick Coupling w/Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
O-Ring for Quick Coupling
Blank = O-ring Silicon (Standard)
PreFilters
-G(pore Size)= Glass Fiber PreFilter
-P(pore Size)= PolyPro Media PreFilter
P = M8 Threaded Plug - Limited
options
-S(pore Size) = PES PreFilter
Quick Coup ings are molded Female Quick Coupling with Plastic latch will be threaded on compatible w th CPC (Colder) LinkTech and others.
70mm Diameter Capsule -ETO = Ethylene oxide
sterilization
-NI = No vent or drain inlet fitting
-NO = NO vent or drain Outlet fitting
Input Fitting Output Fitting Options
-GP = Gamma stable polypropylene shell
-E = Polyethylene shell and HDPE media support for gamma sterilization
L = Female Luer Lock
Example - Capsule, Luer Lock V/D, 2.5" Internal filter, 0.2 micron PTFE Capsule, Standard Grade, with 1.5" Tri-Clamp fittings would be SKLF020STCTC
Page 45
PureFlo® Nylon Filter Capsules (Nylon Membrane on PP Construction)
ZenPure Ze
nPur
e
PureFlo® Nylon filter capsules are highly retentive, naturally hydro-philic nylon membrane filters that have been specially designed for liquid applications. The nylon membrane in an all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane capsules. No ad-hesives, binders, or surfactants are used in the manufacturing proc-ess. All capsules are rinsed with high-purity water to reduce ex-tractables and downtime.
The naturally hydrophilic nylon membrane does not require pre-wetting with IPA and flushing with DI water, thereby eliminating a potential source of contamination and hazardous waste.
All filter capsules are 100% integrity tested to ensure filter perform-ance each and every time out of the package. PureFlo nylon filter capsules are well-suited for critical applications where superior flow and particle removal efficiency at 0.05, 0.1, 0.2, 0.45, 0.65, 0.8, and 1.2 micron is required.
Applications Solvents Parts Cleaning Fine Chemicals Cosmetics Ink Jets Pharmaceuticals Process Water Biologics Beverages Dyes
Materials of Construction Membrane: Naturally Hydrophilic Nylon Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene Fitting Connections: MNPT, FNPT, Compression, Sanitary Flange, Hose Barb, Quick Coupling
Dimensions (Nominal) Length: 1.5 in (68 mm) Length: 2.5 in (98 mm) Length: 5.0 in (153 mm) Length 7.5 in (251 mm) Length: 10 in (281mm) Diameter: 2.88 in (73 mm)
Effective Filtration Area 1.5 in - 0.74 ft2 (690 cm2) 2.5 in - 1.4 ft2 (1300 cm2) 5.0 in - 2.6ft2 (2450 cm2) 7.5 in - 4.0ft2 (3750 cm2) 10 in - 5.3 ft2 (4900 cm2)
Operating Conditions Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C Maximum Operating Temperature: 140°F/60°C
Features Benefits ■ Naturally Hydrophilic Nylon
Membrane (Absolute Rated) ■ IPA pre-wetting not required – thereby eliminating a potential source
of contamination and disposal waste ■ Reduces downtime and improves throughput ■ Economic alternative to PTFE and PVDF ■ Unlike hydrophobic filters there is no de-wetting in outgassing fluids
■ Small Disposable Capsule ■ Rapid installation reduces downtime ■ Low hold-up volume reduces chemical waste ■ Reduced handling of hazardous chemicals
■ Ease of Scale-Up ■ Consistent filtration from laboratory to full production testing
■ Low Filter Extractables ■ No adhesives, binders, or surfactants used ■ Capsules are rinsed with high-purity water
Regulatory Compliance Manufactured from materials that conform to the require-ments of 21CFR Part 177 of the U.S. Code of Federal Regu-lations and USP Class VI Biological Test for Plastics.
Autoclave Cycles 25 times @ 257°F/125°C for 30 minutes Capsules must not be in situ steam-sterilized
Page 46
ZenPure PureFlo® Nylon Filter Capsules
(Nylon Membrane on PP Construction)
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B13 Rev 2011.08
PureFlo Nylon Filter Cartridge Ordering Guide
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2
0 1 2 3 4 5 6 7
PureFlo 1.5" PES Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1/4" Commpression fitting
0.05 0.1
0.20.45 0.65 1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 2.5" Nylon Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1/4" Commpression fitting
0.050.1
0.20.45
0.65
1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 1 2 3 4 5
0 4 8 12 16
PureFlo 5" Nylon Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1/4" Commpression fitting
0.05
0.10.2
0.45
0.651.0
1H = 1/8" Hose barbs Luer Lock1NF = 1/8" FNPT Luer Lock2C = 1/4" Compression 1/4" Comp2H = 1/4" to 1/2" Hose barbs Luer Lock2HS = 1/4" to 3/8" Hose barbs Luer Lock2L = Large Female Luer Lock fitting Luer Lock2N = 1/4" MNPT Luer Lock2NF = 1/4" FNPT Luer Lock2Q = 1/4" Male Quick Coupling Luer Lock2QF = 1/4" Female Quick Coupling Luer Lock2QFP = 1/4" Female Quick Coupling with Plastic latch Luer Lock2QP = 1/4" Male Quick Coupling for Plastic latch Luer Lock3C = 3/8" Compression 1/4" Comp3H = 3/8" Hose Barb (future) Luer Lock3HE = 3/8" Hose Barb Elbow Luer Lock3NF = 3/8" FNPT Luer Lock4C = 1/2" Commpression 1/4" Comp4H = 1/2" Hose Barb (future) Luer Lock4N = 1/2" MNPT Luer Lock4QP = 1/2" Male Quick Coupling for Plastic latch Luer LockMT = 0.5" Tri clamps Luer LockTC = 1-1/2" Tri clamp Luer Lock
Inlet/Outlet Fittings Vent and
Drain fittings
Option: Plugged and Cut off Vent and/or Drains
PureFlo Capsule Filters
Vent & Drain Fitting Filter Media Pore size
(Micron) Length
005 = 0.05 H = 1.5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSK N = Nylon 010 = 0.10 S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT
020 = 0.20 L = 5" 1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latch -NY = Nylon Construction -OE = O-ring EPDM045 = 0.45 E= 7.5" 1QF = 1/8" Female Quick Coupling w/Metal latch 1QF = 1/8" Female Quick Coupling w/Metal latch -FB = Filling bell -ON = O-ring Nitrile065 = 0.65 K = 10" 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs -FC = Filling bell with Cap -OV = O-ring Viton080 = 0.80 2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs120 = 1.20 2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting
2N = 1/4" MNPT 2N = 1/4" MNPT2NF = 1/4" FNPT 2NF = 1/4" FNPT2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling w/Metal latch 2QF = 1/4" Female Quick Coupling w/Metal latch2QFP = 1/4" Female Quick Coupling w/Plastic latch 2QFP = 1/4" Female Quick Coupling w/Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
Blank = O-ring Silicon (Standard)
PreFilters
L = Female Luer Lock
-GP = Gamma stable polypropylene shell
P = M8 Threaded Plug - Limited options
70mm Diameter Capsule N = No vent or
drain fittings-ETO = Ethylene oxide sterilization
-NI = No vent or drain inlet fitting
-NO = NO vent or drain Outlet fitting
-E = Polyethylene shell and HDPE media support for gamma sterilization
Example - Capsule, Luer Lock V/D, 2.5" Internal filter, 0.2 micron Nylon Capsule, Standard Grade, with 1.5" Tri-Clamp fittings would be SKLN020STCTC
-G(pore Size)= Glass Fiber PreFilter
-P(pore Size)= PolyPro Media PreFilter
-S(pore Size) = PES PreFilter
Quick Couplings are molded Female Quick Coupling w th Plastic latch wi l be threaded on compatible with CPC (Colder) LinkTech and others.
O-Ring for Quick Coupling
Input Fitting Output Fitting Options
Page 47
PureFlo Nylon Filter Capsules (SKV Series)
ZenPure Ze
nPur
e
Nylon Capsule
PureFlo® SKV Series Nylon filter capsules are highly re-tentive, naturally hydrophilic nylon membrane filters that have been specially designed for liquid applica-tions. The nylon membrane in an all-polypropylene con-struction provides excellent chemical compatibility and superior flow per unit area as compared to other mem-brane capsules. No adhesives, binders, or surfactants are used in the manufacturing process. All capsules are rinsed with high-purity water to reduce extractables and downtime.
The naturally hydrophilic nylon membrane does not re-quire pre-wetting with IPA and flushing with DI water, thereby eliminating a potential source of contamination and hazardous waste.
All filter capsules are 100% integrity tested to ensure filter performance each and every time out of the pack-age. PureFlo nylon filter capsules are well-suited for critical applications where superior flow and particle re-moval efficiency at 0.05, 0.1, 0.2, 0.45, 0.65, 0.8 and 1.2 micron is required.
Specifications
Materials of Construction: Media: Naturally Hydrophilic Nylon Media Supports: None Cage, Core, End Caps: Polypropylene Sealing: Thermally bonded
Fitting Connections: See ordering guide for the availability. (Custom adaptors available upon request)
Nominal Dimensions: Length: 1.5in. (68mm), 2.5in. (98mm), 5in. (153mm), 7.5in. (251mm), and 10in. (281mm)
Diameter: 2.88 in. (73mm)
Effective Filtration Area: 1.5 in - 0.74 ft2 (690 cm2), 2.5 in - 1.4 ft2 (1300 cm2), 5.0 in - 2.64 ft2 (2450 cm2), 7.5 in - 4.0ft2 (3750 cm2), 10 in - 5.3 ft2 (4900 cm2)Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.2 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30 psi) at 68°F/20°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Operating Temperature: 140°F/60°C
Applications Solvents Water Hard Particle Beverages Cell Removal Pharmaceuticals Chemicals Biologics
Page 48
ZenPure PureFlo Nylon Filter Capsules
(SKV Series)
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B13.0.5 Rev 2011.08
Specifications (cont.)
Autoclavable & Sanitizable: Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sani-tizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
PureFlo SKV Series Nylon Filter Capsule Ordering Guide
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2
0 1 2 3 4 5 6 7
PureFlo 1.5" PES Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1/4" Commpression fitting
0.05 0.1
0.20.45 0.65 1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 2.5" Nylon Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1/4" Commpression fitting
0.050.1
0.20.45
0.65
1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 1 2 3 4 5
0 4 8 12 16
PureFlo 5" Nylon Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1/4" Commpression fitting
0.05
0.10.2
0.45
0.651.0
PureFlo Capsule Filters Filter Media Pore size
(Micron)
Internal Filter
LengthSKV N = Nylon 005 = 0.05 H = 1.5" 1H = 1/8" Hose Barbs 1H = 1/8" Hose Barbs O-Ring for Quick
010 = 0.1 S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT -OE = O-ring EPDM020 = 0.2 L = 5" 1Q = 1/8" Male Quick Coupling with Metal Latch 1Q = 1/8" Male Quick Coupling with Metal Latch -ON = O-ring Nitrile045 = 0.45 E = 7.5" 1QF = 1/8" Female Quick Coupling with Metal Latch 1QF = 1/8" Female Quick Coupling with Metal Latch -OV = O-ring Viton065 = 0.65 K = 10" 2H = 1/4" Hose Barbs 2H = 1/4" Hose Barbs080 = 0.8 2N = 1/4" MNPT 2N = 1/4" MNPT120 = 1.2 2NF = 1/4" FNPT 2NF = 1/4" FNPT
2Q = 1/4" Male Quick Coupling for Metal Latch 2Q = 1/4" Male Quick Coupling for Metal Latch -FB = Filling Bell*2QF = 1/4" Female Quick Coupling with Metal Latch 2QF = 1/4" Female Quick Coupling with Metal Latch -FC = Filling Bell with Cap*2QFP = 1/4" Female Quick Coupling w/Plastic Latch 2QFP = 1/4" Female Quick Coupling w/Plastic Latch2QP = 1/4" Male Quick Coupling for Plastic Latch 2QP = 1/4" Male Quick Coupling for Plastic Latch3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3NF = 3/8" FNPT 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri-clamps MT = 1/2" Tri-clampsTC = 1-1/2" Tri-clamp TC = 1-1/2" Tri-clamp
-P(pore Size)= PolyPro Media PreFilter-ETO = Ethylene oxide
sterilization -S(pore Size) = PES PreFilter-N= No vent or drain
fittings
Input Fitting
Blank = O-ring Silicon (Standard)
Output Fitting Option
Blank = Polypro construction
-E = Polyethylene shell and HDPE media support for gamma sterilization
-GP = Gamma stable polypropylene shell -G(pore Size)= Glass Fiber
PreFilter
70mm Diameter Capsule with Bleed
Valve
-NI = No vent or drain inlet fitting Silicon O-Rings for Bleed
Valve and Quick Coupling fittings
-NO = No vent or drain Outlet fitting
Example - PureFlo SKV Series Capsule, Nylone , 2.5" internal filter, 0.2 micron, with 1.5" Tri-Clamp fittings I/O, w/PP Construction, would be SKVN020STCTC
Note Quick Couplings are molded on. Compat ble with CPC (Colder), LinkTech and others. * - 2H or 3H with fil ing bell only
Page 49
PureFlo All Nylon Filter Capsules (SNL Series)
ZenPure Ze
nPur
e
All Nylon Capsule
PureFlo® All Nylon filter capsules are highly retentive, naturally hydrophilic nylon membrane filters that have been specially designed for liquid applications. The ny-lon membrane in an all-nylon construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane capsules. No adhesives, binders, or surfactants are used in the manufacturing process. All capsules are rinsed with high-purity water to reduce extractables and downtime.
The naturally hydrophilic nylon membrane does not re-quire pre-wetting with IPA and flushing with DI water, thereby eliminating a potential source of contamination and hazardous waste.
All filter capsules are 100% integrity tested to ensure filter performance each and every time out of the pack-age. PureFlo nylon filter capsules are well-suited for critical applications where superior flow and particle re-moval efficiency at 0.05, 0.1, 0.2, 0.45, 0.65, 0.8, and 1.2 micron is required.
Specifications
Materials of Construction: Media: Naturally Hydrophilic Nylon Media Supports: None Cage, Core, End Caps: Nylon Sealing: Thermally bonded
Fitting Connections: See ordering guide for the availability. (Custom adaptors available upon request)
Nominal Dimensions: Lengths: 1.5in. (68mm), 2.5in. (98mm), 5in. (153mm), 7.5in. (251mm), and 10in. (281mm)
Diameter: 2.88 in. (73mm)
Effective Filtration Area: 1.5 in - 0.74 ft2 (690 cm2), 2.5 in - 1.4 ft2 (1300 cm2), 5.0 in - 2.64 ft2 (2450 cm2), 7.5 in - 4.0ft2 (3750 cm2), 10 in - 5.3 ft2 (4900 cm2)Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Liquid: 3.0 bar (43.5psi) at 203°F/95°C Gas: 4.1 bar (60psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.2 bar (60psi) at 68°F/20°C 1.5 bar (21.75psi) at 203°F/95°C Maximum Reverse Differential Pressure: 2.1 bar (30 psi) at 68°F/20°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Operating Temperature: : 203°F/95°C
Applications Solvents Water Hard Particle Beverages Cell Removal Pharmaceuticals Chemicals Biologics
Page 50
ZenPure PureFlo All Nylon Filter Capsules
(SNL Series)
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B13.1 Rev 2011.08
Specifications (cont.)
Autoclavable & Sanitizable: Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sani-tizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
PureFlo All Nylon Filter Capsule Ordering Guide
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2
0 1 2 3 4 5 6 7
PureFlo 1.5" PES Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1/4" Commpression fitting
0.05 0.1
0.20.45 0.65 1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 2.5" Nylon Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1/4" Commpression fitting
0.050.1
0.20.45
0.65
1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 1 2 3 4 5
0 4 8 12 16
PureFlo 5" Nylon Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1/4" Commpression fitting
0.05
0.10.2
0.45
0.651.0
PureFlo Capsule Filters
Vent & Drain Fitting
Filter Media
Pore size (Micron) Length Options
005= 0.05 H = 1.5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSN 010 = 0.10 S = 2 5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT
020 = 0.20 L = 5" 1QF = 1/8" Female Quick Coupling w/ Metal latch 1QF = 1/8" Female Quick Coupling w/ Metal latch045 = 0.45 E = 7 5" 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs
70mm Diameter 065 = 0.65 K = 10" 2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs080 = 0.80 2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting120 = 1.20 2N = 1/4" MNPT 2N = 1/4" MNPT
2NF = 1/4" FNPT 2NF = 1/4" FNPT2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling w/ Metal latch 2QF = 1/4" Female Quick Coupling w/ Metal latch2QFP = 1/4" Female Quick Coupling w/ Plastic latch 2QFP = 1/4" Female Quick Coupling w/ Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT O-Ring for Quick Coupling4H = 1/2" Hose Barb 4H = 1/2" Hose Barb -OE = O-ring EPDM4N = 1/2" MNPT 4N = 1/2" MNPT -ON = O-ring Nitrile4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latch -OV = O-ring VitonMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
Blank = O-ring Silicon (Standard)
Example - 0.2um Nylon with Nylon Construction, Luer Lock V/D, 1 5" internal filter, 1/4" MNPT I/O is SNLN020H2N2NQuick Couplings are molded Female Quick Coupling with Plastic latch will be threaded on compatible with CPC (Colder) LinkTech and others.
Input Fitting Output Fitting
N = Nylon
-N = No vent or Drain fittings
-NI = No vent or drain inlet fitting
-NO = NO vent or drain Outlet fitting
L = Female Luer Lock Blank = Nylon construction
Media on All Nylon Construction P = M8 Threaded
Plug - Limited options-FB = Filling bell
-FC = Filling bell with Cap
-ETO = Ethylene oxide sterilization
Page 51
PureFlo All Nylon Filter Capsules (SNV Series)
ZenPure Ze
nPur
e
All Nylon Capsule
PureFlo® SKN Series All Nylon filter capsules are highly retentive, naturally hydrophilic nylon membrane filters that have been specially designed for liquid applica-tions. The nylon membrane in an all-nylon construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane cap-sules. No adhesives, binders, or surfactants are used in the manufacturing process. All capsules are rinsed with high-purity water to reduce extractables and downtime.
The SKN capsules were designed with built-in bleed valves for simple and efficient evacuation of air and liq-uid from the upstream side. The naturally hydrophilic nylon membrane does not require pre-wetting with IPA and flushing with DI water, thereby eliminating a poten-tial source of contamination and hazardous waste.
All filter capsules are 100% integrity tested to ensure filter performance each and every time out of the pack-age. PureFlo nylon filter capsules are well-suited for critical applications where superior flow and particle re-moval efficiency at 0.05, 0.1, 0.2, 0.45, 0.65, 0.8, and 1.2 micron is required.
Specifications
Materials of Construction: Media: Naturally Hydrophilic Nylon Media Supports: None Cage, Core, End Caps: Nylon Sealing: Thermally bonded
Fitting Connections: See ordering guide for the availability. (Custom adaptors available upon request)
Nominal Dimensions: Length: 1.5in. (68mm), 2.5in. (98mm), 5in. (153mm), 7.5in. (251mm), and 10in. (281mm)
Diameter: 2.88 in. (73mm)
Effective Filtration Area: 1.5 in - 0.74 ft2 (690 cm2), 2.5 in - 1.4 ft2 (1300 cm2), 5.0 in - 2.64 ft2 (2450 cm2), 7.5 in - 4.0ft2 (3750 cm2), 10 in - 5.3 ft2 (4900 cm2)Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.2 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30 psi) at 68°F/20°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Operating Temperature: 203°F/95°C
Applications Solvents Water Hard Particle Beverages Cell Removal Pharmaceuticals Chemicals Biologics
Page 52
ZenPure PureFlo All Nylon Filter Capsules
(SNV Series)
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B13.2 Rev 2011.08
Specifications (cont.)
Autoclavable & Sanitizable: Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sani-tizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
PureFlo All Nylon Filter Capsule Ordering Guide
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2
0 1 2 3 4 5 6 7
PureFlo 1.5" PES Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1/4" Commpression fitting
0.05 0.1
0.20.45 0.65 1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 2.5" Nylon Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1/4" Commpression fitting
0.050.1
0.20.45
0.65
1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 1 2 3 4 5
0 4 8 12 16
PureFlo 5" Nylon Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1/4" Commpression fitting
0.05
0.10.2
0.45
0.651.0
PureFlo Capsule Filters
Filter Media
Pore size (Micron)
Internal Filter
Length Option
005 = 0.05 H = 1 5" 1H = 1/8" Hose Barbs 1H = 1/8" Hose BarbsSNV 010 = 0.10 S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT
020 = 0.20 L = 5" 1QF = 1/8" Female Quick Coupling with Metal Latch 1QF = 1/8" Female Quick Coupling with Metal Latch -FB = Filling BellNylon Construction 045 = 0.45 E = 7.5" 2H = 1/4" Hose Barbs 2H = 1/4" Hose Barbs -FC = Filling Bell w/ Cap
065 = 0.65 K = 10" 2N = 1/4" MNPT 2N = 1/4" MNPT080 = 0.80 2NF = 1/4" FNPT 2NF = 1/4" FNPT120 = 1.20 2Q = 1/4" Male Quick Coupling for Metal Latch 2Q = 1/4" Male Quick Coupling for Metal Latch
2QF = 1/4" Female Quick Coupling w/ Metal Latch 2QF = 1/4" Female Quick Coupling w/ Metal Latch2QFP = 1/4" Female Quick Coupling w/ Plastic Latch 2QFP = 1/4" Female Quick Coupling w/ Plastic Latch2QP = 1/4" Male Quick Coupling for Plastic Latch 2QP = 1/4" Male Quick Coupling for Plastic Latch3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3NF = 3/8" FNPT 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latch -OE = O-ring EPDMMT = 1/2" Tri-clamps MT = 1/2" Tri-clamps -ON = O-ring NitrileTC = 1-1/2" Tri-clamp TC = 1-1/2" Tri-clamp -OV = O-ring Viton
Silicon o-rings for Bleed Valve and Quick Coupling fittings
Blank = O-ring Silicon (Standard)
Example - PureFlo SNV Series Capsule, Nylon , 2.5" internal filter, 0.2 micron, with 1.5" Tri-Clamp fittings I/O, would be SNVN020STCTC
Quick Coup ings are molded on. Female Quick Coupling with Plastic latch will be threaded on. Compatible with CPC (Colder) LinkTech and others.
N = Nylon
Input Fitting Output Fitting
O-Ring for Quick Coupling
70mm Diameter Capsule with Bleed
Valve
-ETO = Ethylene oxide sterilization
-N= No vent or drain fittings
-NI = No vent or drain inlet fitting
-NO = No vent or drain Outlet fitting
Blank = Nylon construction
Page 53
PureFlo Nylon Screen Filter Capsules (Nylon Screen on PP Construction)
ZenPure Ze
nPur
e
Screen Filtration
PureFlo® nylon screen capsule filters are designed for filtration and clarification applications in the pharmaceutical, biotechnology, food and beverage, medical, chemical, and water worldwide. This family of products is particularly suitable for the fluids with large sizes particles. The nylon screen removes particles by a sieving. Hard particles can be easily removed by the use of these units.
The nylon screen in an all-polypropylene construc-tion provides excellent chemical compatibility. It can also be constructed in Nylon, Polyethylene and Gamma stabilized PP shells. PureFlo nylon screen filter capsules are well-suited for applications. No adhesives, binders, or surfactants are used in the manufacturing process. All capsules are rinsed with high-purity water to reduce extractables and downtime in a clean room environment to ensure filter performance each and every time out of the package.
Specifications
Materials of Construction: Media: Nylon Screen Media Supports: Nylon Cage, Core, End Caps: Polypropylene, Gamma Stabilized PP, Nylon Sealing: Thermally bonded
Fitting Connections: See ordering guide for the availability. (Custom adaptors available upon request)
Effective Filtration Area: Lengths: 1.5” 0.65ft2 (500cm2), 2.5” 1.3ft2 (1000cm2), 5” 2.1ft2 (2000cm2), 7.5” 3.2ft2 (3000cm2) and 10” 4.3ft2 (4000cm2)
Diameter: 2.75 in. (70mm)
Available Ratings: 10um, 20um, 40um, 60um, 100um, and 200um
Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30 psi) at 68°F/20°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Operating Temperature: 176°F/80°C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Applications Clarification Water Hard Particle Beverages Cell Removal Pharmaceuticals Chemicals Biologics
Page 54
ZenPure PureFlo Nylon Screen Filter Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B13.3 Rev 2011.08
Specifications (cont.)
Autoclavable & Sanitizable: Capsules can be autoclaved 25 times at 257°F/125°Cfor 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and tempera-ture). Capsules must not be in situ steam-sterilized.
PureFlo Nylon Screen Filter Capsule Ordering Guide
PureFlo Capsule Filters
Vent & Drain Fitting Filter Media Pore size
(Micron) Length
100 = 10 H = 1.5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSK 200 = 20 S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT
400 = 40 L = 5" 1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latch -NY = Nylon Construction -OE = O-ring EPDM600 = 60 E= 7.5" 1QF = 1/8" Female Quick Coupling w/Metal latch 1QF = 1/8" Female Quick Coupling w/Metal latch -FB = Filling bell -ON = O-ring Nitrile10X = 100 K = 10" 2C = 1/4" Compression 2C = 1/4" Compression -FC = Filling bell with Cap -OV = O-ring Viton20X = 200 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs
2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting2N = 1/4" MNPT 2N = 1/4" MNPT2NF = 1/4" FNPT 2NF = 1/4" FNPT2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling w/Metal latch 2QF = 1/4" Female Quick Coupling w/Metal latch2QFP = 1/4" Female Quick Coupling w/Plastic latch 2QFP = 1/4" Female Quick Coupling w/Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3C = 3/8" Compression 3C = 3/8" Compression3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT4C = 1/2" Compression 4C = 1/2" Compression4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
-G(pore Size)= Glass Fiber PreFilter
-P(pore Size)= PolyPro Media PreFilter
-S(pore Size) = PES PreFilter
Quick Couplings are molded, Female Quick Coup ing w th Plastic latch will be threaded on, compatible with CPC (Colder), LinkTech and others.
Example - SK Series Capsule, Luer Lock V/D, 2.5" Internal filter, 20 micron Nylon Screen Capsule, Standard Grade, with 1.5" Tri-Clamp fittings would be SKLNS200STCTC
70mm Diameter Capsule N = No vent or
drain fittings-ETO = Ethylene oxide sterilization
-NI = No vent or drain inlet fitting
L = Female Luer Lock
-GP = Gamma stable polypropylene shell
O-Ring for Quick Coupling
NS = Nylon ScreenP = M8 Threaded
Plug - Limited options
Blank = O-ring Silicon (Standard)
PreFilters
Input Fitting Output Fitting Options
-NO = NO vent or drain Outlet fitting
-E = Polyethylene shell and HDPE media support for gamma sterilization
60um Nylon Screen
Page 55
PureFlo® Polyethylene Filter Capsules
ZenPure Ze
nPur
e
PureFlo® Polyethylene filter capsules are highly retentive hydrophobic membrane filters that have been specially designed for critical applications. The PE membrane in an all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane capsules. No adhesives, binders, or surfac-tants are used in the manufacturing process and all cartridges are rinsed with high-purity water to reduce extractables and downtime.
The hydrophobic PE membrane is gamma stable and ideally suited for sterile applications. In addition, the hydrophobic membrane provides superior flow and pressure drop charac-teristics per surface area for gas filtration and tank venting applications. All filter capsules are 100% integrity tested to ensure filter performance each and every time out of the package. PureFlo PE filter capsules are well-suited for critical applications where superior flow and particle removal efficiency at 0.2 to 2.5 micron is required.
Applications Sterile gasses and liquids Ink Jets Bases Beverages Solvents Pharmaceuticals Fine Chemicals Biologics Plating Solutions Dyes Process Water Lacquers
Materials of Construction Membrane: Hydrophobic Polyethylene Membrane Supports: Polyethylene Cage, Core, End Caps, Capsule: Polyethylene Fitting Connections: MNPT, FNPT, Quick Couplings, Compres-sion, Hose Barb, Sanitary Flange
Dimensions (Nominal) Length: 1.5 in (68 mm) Length: 2.5 in (98 mm) Length: 5.0 in (153 mm) Length: 7.5 in (251mm) Length: 10 in (281mm) Diameter: 2.88 in (73 mm)
Effective Filtration Area 1.5 in - 0.65 ft2 (500 cm2) 2.5 in - 1.3 ft2 (1000 cm2) 5.0 in - 2.7 ft2 (1900 cm2) 7.5 in - 4.3 ft2 (2900 cm2) 10 in - 5.2 ft2 (3800 cm2)
Operating Conditions Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 5 bar (72psi) at 68°F/20°C Maximum Reverse Differential Pressure: 3.0 bar (44psi) at 68°F/20°C Maximum Operating Temperature: 140°F/60°C
Regulatory Compliance Manufactured from materials that conform to the re-quirements of 21CFR Part 177 of the U.S. Code of Fed-eral Regs and USP Class VI Biological Test for Plastics
Features Benefits ■ Naturally Hydrophobic PE Membrane ■ High flow rates with low pressure drop per surface area as
compared to other filter materials ■ Superior filter lifetime and process throughputs
■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide-range of chemicals such as acids, bases, and solvents
■ No media migration into the process fluid ■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during the
manufacturing process resulting in superior downstream cleanliness
■ All cartridges are rinsed with high-purity water to reduce extractables and downtime
■ Quality Manufacturing ■ Consistent and reproducible particulate removal
Page 56
ZenPure PureFlo® Polyethylene Filter Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B13.5 Rev 2011.08
PureFlo Polyethylene Filter Cartridge Ordering Guide
1H = 1/8" Hose barbs Luer Lock1NF = 1/8" FNPT Luer Lock2C = 1/4" Compress on 1/4" Comp2H = 1/4" to 1/2" Hose barbs Luer Lock2HS = 1/4" to 3/8" Hose barbs Luer Lock2L = Large Female Luer Lock f tting Luer Lock2N = 1/4" MNPT Luer Lock2NF = 1/4" FNPT Luer Lock2Q = 1/4" Male Quick Coupling Luer Lock2QF = 1/4" Female Qu ck Coupling Luer Lock2QFP = 1/4" Female Qu ck Coupling with Plast c latch Luer Lock2QP = 1/4" Male Quick Coupling for Plast c latch Luer Lock3C = 3/8" Compress on 1/4" Comp3H = 3/8" Hose Barb (future) Luer Lock3HE = 3/8" Hose Barb Elbow Luer Lock3NF = 3/8" FNPT Luer Lock4C = 1/2" Commpression 1/4" Comp4H = 1/2" Hose Barb (future) Luer Lock4N = 1/2" MNPT Luer Lock4QP = 1/2" Male Quick Coupling for Plast c latch Luer LockMT = 0.5" Tri clamps Luer LockTC = 1-1/2" Tri clamp Luer Lock
Inlet/Outlet Fittings Vent and
Drain fittings
Option: Plugged and Cut off Vent and/or Drains
PureFlo Capsule Filters
Vent & Drain Fitting Filter Media Pore size
(Micron) Length
020 = 0.20 H = 1.5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSK 100 = 1.0 S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT
150 = 1.5 L = 5" 1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latch -NY = Nylon Construction -OE = O-ring EPDM250 = 2.5 E= 7.5" 1QF = 1/8" Female Quick Coupling w/Metal latch 1QF = 1/8" Female Quick Coupling w/Metal latch -FB = Filling bell -ON = O-ring Nitrile
K = 10" 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs -FC = Filling bell with Cap -OV = O-ring Viton2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting2N = 1/4" MNPT 2N = 1/4" MNPT2NF = 1/4" FNPT 2NF = 1/4" FNPT2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling w/Metal latch 2QF = 1/4" Female Quick Coupling w/Metal latch2QFP = 1/4" Female Quick Coupling w/Plastic latch 2QFP = 1/4" Female Quick Coupling w/Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
O-Ring for Quick Coupling
Blank = O-ring Silicon (Standard)
PreFilters
-G(pore Size)= Glass Fiber PreFilter
-P(pore Size)= PolyPro Media PreFilter
-S(pore Size) = PES PreFilter
-E = Polyethylene shell and HDPE media support for gamma sterilization
Example - SK Series Capsule, Luer Lock V/D, 2.5" Internal filter, 1.5 micron Polyethylene Capsule, Standard Grade, with 1.5" Tri-Clamp fittings would be SKLPE150STCTC
Quick Couplings are molded Female Quick Coupling w th Plastic latch wi l be threaded on compatible with CPC (Colder) LinkTech and others.
N = No vent or drain fittings
-ETO = Ethylene oxide sterilization
-NI = No vent or drain inlet fitting
-NO = NO vent or drain Outlet fitting
Input Fitting Output Fitting Options
L = Female Luer Lock
-GP = Gamma stable polypropylene shell
E =PolyethyleneP = M8 Threaded
Plug - Limited options
70mm Diameter Capsule
Page 57
PureFlo® Glass Microfiber Filter Capsules
ZenPure Ze
nPur
e
PureFlo® Borosilicate Microfiber filter cartridges are highly retentive filters that have a pleated design to maximize surface area. The borosilicate microfiber media in an all-polypropylene construction provides excellent chemical com-patibility and superior flow per unit area. No adhesives or surfactants are used in the manufacturing process. The boro-silicate microfiber is “non-fiber releasing.”
The borosilicate microfiber is ideally-suited for aggressive microbial retention. In addition, the media provides superior flow and pressure drop characteristics per unit area. PureFlo Microfiber filter cartridges are well-suited for critical applica-tions where superior flow and particle retention for deform-able and non-deformable particle removal is required.
Applications
Prefiltration Biologics
Serums Bio-burden reduction
Pharmaceuticals Retention of deformable particles
Wine Clarification Inks
Food & Beverage Cosmetics
Features Benefits ■ Borosilicate Microfiber Media
(Absolute Rated) ■ High dirt-loading capacity ■ Natural positive charge ■ Superior process throughputs
■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility ■ No media migration
■ Quality Construction ■ No adhesives or surfactants ■ Thermally welded construction
Materials of Construction Media: Non-Woven Borosilicate Microfiber Pleate Supports: Polypropylene Cage, Core, End Caps: Polypropylene Fitting Connections: NPT, Couplings Compression, Hose Barb, Sanitary Flange
Dimensions (Nominal) Length: 1.5 in (68 mm) Length: 2.5 in (98 mm) Length: 5.0 in (153 mm) Length: 7.5 in (251 mm) Length: 10 in (281mm) Diameter: 2.88 in (73 mm)
Effective Filtration Area 1.5 in - 0.48 ft2 (450 cm2) 2.5 in - 1.0 ft2 (950 cm2) 5.0 in - 1.8 ft2 (1700 cm2) 7.5 in - 4.3 ft2 (3980 cm2) 10 in - 3.66 ft2 (3400 cm2)
Operating Conditions Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C
Regulatory Compliance Manufactured from materials that conform to the re-quirements of USP Class VI Biological Test for Plastics.
Autoclave Cycles 25 times @ 257°F/125°C for 30 minutes Capsules must not be in situ steam-sterilized
Page 58
ZenPure PureFlo® Glass Microfiber Filter Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B13.8 Rev 2011.07
PureFlo Glass Fiber Filter Cartridge Ordering Guide PureFlo Capsule Filters
Vent & Drain Fitting Filter Media Pore size
(Micron) Length
004 = 0.45 H = 1.5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSK 005 = 0.5 S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT
010 = 1.0 L = 5" 1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latch -NY = Nylon Construction -OE = O-ring EPDM030 = 3.0 E= 7.5" 1QF = 1/8" Female Quick Coupling w/Metal latch 1QF = 1/8" Female Quick Coupling w/Metal latch -FB = Filling bell -ON = O-ring Nitrile050 = 5.0 K = 10" 2C= 1/4" Compression 2C= 1/4" Compression -FC = Filling bell w/Cap -OV = O-ring Viton100 = 10.0 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs200 = 20.0 2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs300 = 30.0 2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting
2N = 1/4" MNPT 2N = 1/4" MNPT2NF = 1/4" FNPT 2NF = 1/4" FNPT2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling w/Metal latch 2QF = 1/4" Female Quick Coupling w/Metal latch2QFP = 1/4" Female Quick Coupling w/Plastic latch 2QFP = 1/4" Female Quick Coupling w/Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3C = 3/8" Compression 3C = 3/8" Compression3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT4C = 1/2" Compression 4C = 1/2" Compression 4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
O-Ring for Quick Coupling
Blank = O-ring Silicon (Standard)
Input Fitting Output Fitting Options
L = Female Luer Lock
-GP = Gamma stable polypropylene shell
G = Glass FiberP = M8 Threaded
Plug - Limited options
70mm Diameter Capsule N = No vent or
drain fittings-ETO = Ethylene oxide sterilization
-NI = No vent or drain inlet fitting
-NO = NO vent or drain Outlet fitting
-E = Polyethylene shell and HDPE media support for gamma sterilization
PreFilters
-G(pore Size)= Glass Fiber PreFilter
-P(pore Size)= PolyPro Media PreFilter
-S(pore Size) = PES PreFilter
Example - SK Series Capsule, Luer Lock V/D, 2.5" Internal filter, 0.3 micron Glass Fiber Capsule, Standard Grade, with 1.5" Tri-Clamp fittings would be SKLG030STCTC
Quick Couplings are molded, Female Quick Coupling w th Plastic latch will be threaded on, compatible w th CPC (Colder), LinkTech and others.
1H = 1/8" Hose barbs Luer Lock1NF = 1/8" FNPT Luer Lock2C = 1/4" Compression 1/4" Comp2H = 1/4" to 1/2" Hose barbs Luer Lock2HS = 1/4" to 3/8" Hose barbs Luer Lock2L = Large Female Luer Lock fitting Luer Lock2N = 1/4" MNPT Luer Lock2NF = 1/4" FNPT Luer Lock2Q = 1/4" Male Qu ck Coupling Luer Lock2QF = 1/4" Female Quick Coupling Luer Lock2QFP = 1/4" Female Qu ck Coupling w th Plastic latch Luer Lock2QP = 1/4" Male Quick Coupling for Plast c latch Luer Lock3C = 3/8" Compression 1/4" Comp3H = 3/8" Hose Barb (future) Luer Lock3HE = 3/8" Hose Barb Elbow Luer Lock3NF = 3/8" FNPT Luer Lock4C = 1/2" Commpression 1/4" Comp4H = 1/2" Hose Barb (future) Luer Lock4N = 1/2" MNPT Luer Lock4QP = 1/2" Male Quick Coupling for Plast c latch Luer LockMT = 0.5" Tri clamps Luer LockTC = 1-1/2" Tri clamp Luer Lock
Inlet/Outlet Fittings Vent and
Drain fittings
Option: Plugged and Cut off Vent and/or Drains
Page 59
PureFlo® Polypropylene Membrane Filter Capsules
ZenPure Ze
nPur
e
PureFlo® polypropylene membrane filter capsules are highly retentive and naturally hydrophobic filters. Polypropylene membrane is a reliable choice for the purification of aggressive chemicals, compressed gases, and vent applica-tions. The all-polypropylene construction is an excellent economic alternative to the more expensive fluoropolymer based medias.
No adhesives, binders, or surfactants are used in the manufacturing process. The membrane does not allow for migration of particle into the process fluid, thereby reducing the potential for contamination and downtime. Furthermore, the all-polypropylene construction provides excellent thermal and chemical compatibility with low and high pH chemicals.
PureFlo polypropylene membrane filter capsules are absolute rated to ensure consistent filter performance each and every time. All filter capsules are 100% integrity tested to ensure filter performance.
Applications Acids Ink Jets Bases Tank vents Solvents Lacquers Fine Chemicals Dyes
Features Benefits ■ Absolute Rated Polypropylene Membrane ■ Consistent and reproducible particulate removal
■ High flow rates and low pressure drops ■ Superior filter lifetime and process throughputs ■ Consistent and reproducible particulate removal
■ 100% Polypropylene Disposable Capsule ■ Excellent thermal and chemical compatibility ■ Rapid installation and reduced downtime ■ Reduced chemical handling and hazardous waste disposal
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during manu-facturing resulting in superior downstream cleanliness
Materials of Construction Membrane: Polypropylene (hydrophobic) Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene Fitting Connections: MNPT, FNPT, Flare Compression, Hose Barb, Sanitary Flange
Dimensions (Nominal) Length: 1.5 in (68 mm) Length: 2.5 in (98 mm) Length: 5.0 in (153 mm) Length: 7.5 in (251 mm) Length: 10 in (281mm) Diameter: 2.88 in (73 mm)
Effective Filtration Area 1.5 in: 0.7 ft2 (650 cm2) 2.5 in: 1.4 ft2 (1300 cm2) 5.0 in: 2.7 ft2 (2500 cm2) 7.5 in: 4.3 ft2 (3980 cm2 10 in: 5.4 ft2 (5000 cm2)
Operating Conditions Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C
Page 60
ZenPure PureFlo® Polypropylene Membrane Filter Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
b14 Rev 2011.08
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 1.5" PolyPro Membrane Capsule
GPM
BarPSID
LPM
Diffe
rent
ial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.10.2
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 2.5" PolyPro Membrane Capsule
GPM
BarPSID
LPM
Dffe
rent
ial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.1
0.2
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 5" PolyPro Membrane Capsule
GPM
BarPSID
LPM
Diffe
rent
ial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.1
0.2
PureFlo Ordering Guide
Regulatory Compliance Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics.
Autoclavable & Sanitizable Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Note - Graphs based on Sanitary fittings.
1H = 1/8" Hose barbs Luer Lock1NF = 1/8" FNPT Luer Lock2C = 1/4" Compression 1/4" Comp2H = 1/4" to 1/2" Hose barbs Luer Lock2HS = 1/4" to 3/8" Hose barbs Luer Lock2L = Large Female Luer Lock fitting Luer Lock2N = 1/4" MNPT Luer Lock2NF = 1/4" FNPT Luer Lock2Q = 1/4" Male Quick Coupling Luer Lock2QF = 1/4" Female Quick Coupling Luer Lock2QFP = 1/4" Female Quick Coupling with Plastic latch Luer Lock2QP = 1/4" Male Quick Coupling for Plastic latch Luer Lock3C = 3/8" Compression 1/4" Comp3H = 3/8" Hose Barb (future) Luer Lock3HE = 3/8" Hose Barb Elbow Luer Lock3NF = 3/8" FNPT Luer Lock4C = 1/2" Commpression 1/4" Comp4H = 1/2" Hose Barb (future) Luer Lock4N = 1/2" MNPT Luer Lock4QP = 1/2" Male Quick Coupling for Plastic latch Luer LockMT = 0 5" Tri clamps Luer LockTC = 1-1/2" Tri clamp Luer Lock
Inlet/Outlet Fittings Vent and
Drain fittings
Option: Plugged and Cut off Vent and/or Drains
PureFlo Capsule Filters
Vent & Drain Fitting Filter Media Pore size
(Micron) Length
010 = 0.1 H = 1.5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSK 020 = 0.2 S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT
L = 5" 1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latch -NY = Nylon Construction -OE = O-ring EPDME= 7.5" 1QF = 1/8" Female Quick Coupling w/Metal latch 1QF = 1/8" Female Quick Coupling w/Metal latch -FB = Filling bell -ON = O-ring NitrileK = 10" 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs -FC = Filling bell w/Cap -OV = O-ring Viton
2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting2N = 1/4" MNPT 2N = 1/4" MNPT2NF = 1/4" FNPT 2NF = 1/4" FNPT2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling w/Metal latch 2QF = 1/4" Female Quick Coupling w/Metal latch2QFP = 1/4" Female Quick Coupling w/Plastic latch 2QFP = 1/4" Female Quick Coupling w/Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
O-Ring for Quick Coupling
Blank = O-ring Silicon (Standard)
PreFilters
-G(pore Size)= Glass Fiber PreFilter
-P(pore Size)= PolyPro Media PreFilter
-E = Polyethylene shell and HDPE media support for gamma sterilization
Example - SK Series Capsule, Luer Lock V/D, 2.5" Internal filter, 0.2 micron PolyPro Membrane Capsule, Standard Grade, with 1.5" Tri-Clamp fittings would be SKLM020STCTC
Quick Couplings are molded Female Quick Coupling w th Plastic latch will be threaded on compatible with CPC (Colder) LinkTech and others.
-S(pore Size) = PES PreFilter
N = No vent or drain fittings
-ETO = Ethylene oxide sterilization
-NI = No vent or drain inlet fitting
-NO = NO vent or drain Outlet fitting
Input Fitting Output Fitting Options
L = Female Luer Lock
-GP = Gamma stable polypropylene shell
M = PolyPro MembraneP = M8 Threaded
Plug - Limited options
70mm Diameter Capsule
Page 61
PureFlo® Polypropylene Filter Capsules
ZenPure Ze
nPur
e
PureFlo® Polypropylene filter capsules are highly retentive, graded porosity, pleated polypropylene media filters that have been specially designed for clarification and pre-filtration applications.
The graded porosity design removes particles in sequence by size – larger particles by the more open outer layers and smaller particles by the tighter inner layers. The outer layers act as a pre-filter while the inner layers provide the absolute rating at the specified pore size. This efficiently spreads the contaminants throughout the media matrix resulting in superior contaminant holding capacity, lifetime, and pressure drop as compared to other media cartridges.
No adhesives, binders, or surfactants are used in the manufacturing process The non-woven media does not allow for migration into the process fluid, thereby reducing the po-tential for extractables and downtime. Furthermore, the all-polypropylene construction provides excellent thermal and chemical compatibility with low and high pH chemicals.
PureFlo Polypropylene filter capsules are absolute rated to ensure consistent filter performance each and every time out of the package. Available in a wide-variety of micron sizes.
Applications Acids Ink Jets Bases Beverages Solvents Pharmaceuticals Fine Chemicals Biologics Plating Solutions Dyes Process Water Lacquers
Features Benefits ■ Absolute Rated Pleated Polypropylene
Media (Graded Porosity Design) ■ Media matrix removes particles in sequence by size – larger
particles by the more open outer layers and smaller particles by the tighter inner layers
■ High flow rates and low pressure drops ■ Superior filter lifetime and process throughputs ■ Consistent and reproducible particulate removal
■ 100% Polypropylene Disposable Capsule ■ Excellent thermal and chemical compatibility ■ No media migration ■ Rapid installation and reduced downtime ■ Reduced chemical handling and hazardous waste disposal
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during manu-facturing, resulting in superior downstream cleanliness
■ Capsules are rinsed with high-purity water
Materials of Construction Media: Non-Woven Polypropylene Meda Supports: Polypropylene Cage, Core, End Caps: Polypropylene Fitting Connections: MNPT, FNPT, Compression, Hose Barb, Sanitary Flange
Dimensions (Nominal) Length: 1.5 in (68 mm) Length: 2.5 in (98 mm) Length: 5.0 in (153 mm) Length: 7.5 in (251 mm) Length: 10 in (281mm) Diameter: 2.88 in (73 mm)
Effective Filtration Area 1.5 in - 0.65 ft2 (600 cm2) 2.5 in - 1.3 ft2 (1200 cm2) 5.0 in - 2.7 ft2 (2400 cm2) 7.5 in - 4.3 ft2 (3980 cm2) 10 in - 5.2 ft2 (4800 cm2)
Operating Conditions Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (72psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C Maximum Operating Temperature: 176°F/80°C
Page 62
ZenPure PureFlo® Polypropylene Filter Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B15 Rev. 2011.07
0
1
2
3
4
5
6
7
8
0
0.1
0.2
0.3
0.4
0.5
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 1.5" PolyPro Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.30.6
1.0
3.05.0
30
10
50,70
0
1
2
3
4
5
0
0.04
0.08
0.12
0.16
0.2
0.24
0.28
0.32
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 2.5" PolyPro Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.3
0.6
1.0
3.05.0
30
10
50,70
0
0.5
1
1.5
2
2.5
3
0
0.05
0.1
0.15
0.2
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 5.0" PolyPro Capsule
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
1.5" Tri Clamp fitting
0.3
0.6
1.0
3.05.0
30
10
50,70
PureFlo Capsule Filters
Vent & Drain Fitting Filter Media Pore size
(Micron) Length
003 = 0.3 H = 1.5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSK 006 = 0.6 S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT
010 = 1.0 L = 5" 1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latch -NY = Nylon Construction -OE = O-ring EPDM030 = 3.0 E= 7.5" 1QF = 1/8" Female Quick Coupling w/Metal latch 1QF = 1/8" Female Quick Coupling w/Metal latch -FB = Filling bell -ON = O-ring Nitrile050 = 5.0 K = 10" 2C= 1/4" Compression 2C= 1/4" Compression -FC = Filling bell w/Cap -OV = O-ring Viton100 = 10.0 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs200 = 20.0 2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs300 = 30.0 2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting500 = 50.0 2N = 1/4" MNPT 2N = 1/4" MNPT700 = 70.0 2NF = 1/4" FNPT 2NF = 1/4" FNPT10X = 100.0 2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch15X = 150.0 2QF = 1/4" Female Quick Coupling w/Metal latch 2QF = 1/4" Female Quick Coupling w/Metal latch
2QFP = 1/4" Female Quick Coupling w/Plastic latch 2QFP = 1/4" Female Quick Coupling w/Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3C = 3/8" Compression 3C = 3/8" Compression3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT4C = 1/2" Compression 4C = 1/2" Compression 4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
Input Fitting Output Fitting Options
L = Female Luer Lock
-GP = Gamma stable polypropylene shell
P = PolyPro MediaP = M8 Threaded
Plug - Limited options
70mm Diameter Capsule N = No vent or
drain fittings-ETO = Ethylene oxide sterilization
-NI = No vent or drain inlet fitting
-NO = NO vent or drain Outlet fitting
-E = Polyethylene shell and HDPE media support for gamma sterilization
Example - SK Series Capsule, Luer Lock V/D, 2.5" Internal filter,10 micron PolyPropylene Media Capsule, Standard Grade, with 1.5" Tri-Clamp fittings would be SKLP100STCTC
Quick Couplings are molded Female Quick Coupling with Plastic latch w ll be threaded on compat ble with CPC (Colder) LinkTech and others.
O-Ring for Quick Coupling
Blank = O-ring Silicon (Standard)
PreFilters
-G(pore Size)= Glass Fiber PreFilter
-P(pore Size)= PolyPro Media PreFilter
-S(pore Size) = PES PreFilter
PureFlo Polypropylene Filter Cartridge Ordering Guide
1H = 1/8" Hose barbs Luer Lock1NF = 1/8" FNPT Luer Lock2C = 1/4" Compression 1/4" Comp2H = 1/4" to 1/2" Hose barbs Luer Lock2HS = 1/4" to 3/8" Hose barbs Luer Lock2L = Large Female Luer Lock fitting Luer Lock2N = 1/4" MNPT Luer Lock2NF = 1/4" FNPT Luer Lock2Q = 1/4" Male Quick Coupling Luer Lock2QF = 1/4" Female Quick Coupling Luer Lock2QFP = 1/4" Female Quick Coupling with Plastic latch Luer Lock2QP = 1/4" Male Quick Coupling for Plastic latch Luer Lock3C = 3/8" Compression 1/4" Comp3H = 3/8" Hose Barb (future) Luer Lock3HE = 3/8" Hose Barb Elbow Luer Lock3NF = 3/8" FNPT Luer Lock4C = 1/2" Commpression 1/4" Comp4H = 1/2" Hose Barb (future) Luer Lock4N = 1/2" MNPT Luer Lock4QP = 1/2" Male Quick Coupling for Plastic latch Luer LockMT = 0.5" Tri clamps Luer LockTC = 1-1/2" Tri clamp Luer Lock
Inlet/Outlet Fittings Vent and
Drain fittings
Option: Plugged and Cut off Vent and/or Drains
Autoclavable & Sanitizable Capsules can be autoclaved 25 times at 257 F/125 C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194 F/90 C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Regulatory Compliance Manufactured from materials that conform to the requirements of 21CFR
Part 177 of the U.S. Code of Federal Regulations and USP Class VI Bio-logical Test for Plastics.
Page 63
Mini Depth Pleated PP Filter Capsules (Depth PP Media on PP Construction)
ZenPure Ze
nPur
e
High Contaminant Holding Filtration
PureFlo® Pleated Depth capsule filters are de-signed for filtration and clarification applications in the pharmaceutical, biotechnology, food and beverage, medical, chemical, and water world-wide. This family of products is particularly suit-able for the fluids that contain gels, colloidal sus-pensions, or high suspended solids.
Highly retentive graded porosity design removes particles by size – larger particles by the more open outer layers and smaller particles by the tighter inner layers. The outer layers act as a pre-filter while the inner layers provide the absolute rating at the specified pore size. This efficiently spreads the contaminants throughout the media matrix, thereby, resulting in superior contaminant holding capacity, lifetime, and lower pressure drop as compared to other depth media car-tridges.
Specifications
Materials of Construction: Media: Non-Woven Polypropylene Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene Sealing: Thermally bonded
Fitting Connections: See ordering guide for the availability. (Custom adaptors available upon request)
Nominal Dimensions: Lengths: 1.5”, 2.5”, 5”, 7.5” and 10” Diameter: 2.75 in. (70mm)
Available Ratings: 0.5um, 1.0um, 1.5um, 2.5um, 4.5um, 10um, and 20um
Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30 psi) at 68°F/20°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Operating Temperature: 176°F (80°C)
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Applications Clarification Ink Gel Removal Beverages Yeast Removal Pharmaceuticals Fine Chemicals Biologics Plating Solutions Wine Beer Water
Page 64
ZenPure Mini Depth Pleated PP Capsules
Your Local Distributor:
B15.1 Rev 2011.07
ZenPure
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
Specifications (cont.)
Autoclavable & Sanitizable: Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and tem-perature). Capsules must not be in situ steam-sterilized.
PureFlo Mini Depth Pleated PP Filter Capsule Ordering Guide
0
1
2
3
4
5
0
0.04
0.08
0.12
0.16
0.2
0.24
0.28
0.32
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo Mini Depth Pleated PP (2.5in) Capsule
GPM
BarPSID
LPM
Dif
fere
nti
al
Pre
ssu
re
Flow Rate @22°C, 1cP Fluid
1.5
2.5
4.510
0
0.5
1
1.5
2
2.5
3
3.5
4
0
0.05
0.1
0.15
0.2
0.25
0 0.5 1 1.5 2 2.5 3 3.5 4
0 5 10 15
PureFlo Mini Depth Pleated PP (5in) Capsule
GPM
BarPSID
LPM
Dif
fere
nti
al
Pre
ssu
re
Flow Rate @22°C, 1cP Fluid
1.5
2.5
4.510
0
1
2
3
4
5
6
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0 0.5 1 1.5
0 0.8 1.6 2.4 3.2 4 4.8 5.6
PureFlo Mini Depth Pleated PP (1.5in) Capsule
GPM
BarPSID
LPM
Dif
fere
nti
al
Pre
ssu
re
Flow Rate @22°C, 1cP Fluid
1.5
2.5
4.5
10
PureFlo Capsule Filters Filter Media Pore size
(Micron) Length Options
002 = 0.2um H = 1.5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbs005 = 0.5um S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT010 = 1.0um L= 5" 1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latch -NY = Nylon Construction015 = 1.5um E= 7.5" 1QF = 1/8" Female Quick Coupling w/Metal latch 1QF = 1/8" Female Quick Coupling w/Metal latch -FB = Filling bell025 = 2.5um K = 10" 2C= 1/4" Compression 2C= 1/4" Compression -FC = Filling bell w/Cap045 = 4.5um 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs100 = 10um 2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs200 = 20um 2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting
2N = 1/4" MNPT 2N = 1/4" MNPT2NF = 1/4" FNPT 2NF = 1/4" FNPT2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling w/Metal latch 2QF = 1/4" Female Quick Coupling w/Metal latch2QFP = 1/4" Female Quick Coupling w/Plastic latch 2QFP = 1/4" Female Quick Coupling w/Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3C = 3/8" Compression 3C = 3/8" Compression3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow -OE = O-ring EPDM3NF = 3/8" FNPT 3NF = 3/8" FNPT -ON = O-ring Nitrile4C = 1/2" Compression 4C = 1/2" Compression -OV = O-ring Viton4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
Example - SK Series Capsule, 2.5" Internal filter,10 micron Depth PolyPropylene Media Capsule, Standard Grade, with 1.5" Tri-Clamp fittings would be SKDP100STCTCQuick Couplings are molded, Female Quick Coupling with Plastic latch will be threaded on, compatible with CPC (Colder), LinkTech and others.
Input Fitting Output Fitting
SK -GP = Gamma stable polypropylene shell
DP = Depth PolyPro Media70mm Diameter
Capsule
-ETO = Ethylene oxide sterilization
-NI = No vent or drain inlet fitting
-NO = NO vent or drain Outlet fitting
-E = Polyethylene shell and HDPE media support for gamma sterilization
Blank = O-ring Silicon (Standard)
O-Ring for Quick Coupling
Internal Cross Section
Page 65
HEPA Filter Capsules (99.997% efficiency at 0.3um)
ZenPure Ze
nPur
e
Specifications
Materials of Construction: Media: Non-Woven Polypropylene, Micro-Glass fiber, PTFE, Polyethylene Media Supports: Polypropylene Shell, Cage, Core, and End Caps: Polypropylene Fitting Connections: Hose Barb, NPT, Compression Quick Couplings, and Sanitary. Any inlet/outlet combinations. (Custom adaptors available upon request)
Nominal Dimensions: Length: 1.5 in (68 mm), Length: 2.5 in (98 mm), Length: 5.0 in (153 mm), Length: 7.5 in (251mm), Length: 10 in (281mm),
Diameter: 2.88 in (73 mm)
Effective Filtration Area: 1.5 in - 0.65 ft2 (600 cm2), 2.5 in - 1.3 ft2 (1200 cm2), 5.0 in - 2.7 ft2 (2400 cm2), 10 in - 5.2 ft2 (4800 cm2)
Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30 psi) at 68°F/20°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Operating Temperature: 140°F/60°C
HEPA Rated: Ensures particulate-free air 99.997% retention of 0.3 µm DOP aerosol Pyrogenicity: <0.25 EU/ml using the LAL test method
Autoclavable & Sanitizable: Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in com-pliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
High-Efficiency Particulate Air and Gas Filter
PureFlo® HEPA Capsules are designed for high retention and particle holding capac-ity for air and gas in the pharmaceutical, biotechnology, medical, chemical, food and beverage applications worldwide. This family of products is particularly suitable for a variety of gases with four different filtration media to choose from.
They are designed to provide bacteria, al-gae, fungal-free air for sterile applications such as fermentors or incubators. The capsules have a durable polypropylene housings. The media allows for high flow rates and low pressure drops.
Applications Tank Vent Air Filter Vacuum pump Beverages Fermentor Pharmaceuticals Fine Chemicals Biologics Incubator Wine Beer Water
Page 66
Your Local Distributor:
ZenPure
B15.2 Rev 2011.08
HEPA Filter Capsules
ZenPure
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
PureFlo MK Series HEPA Filter Capsule Ordering Guide
PureFlo Capsule Filters
Filter Media Surface Area Inlet Fitting Outlet Fitting Option
E = Polyethylene A = 200cm2 1C = 1/8" Compression 1C = 1/8" Compression
MKH F = PTFE B = 300cm2 1H = 1/8" Hose Barb 1H = 1/8" Hose Barb
G = Glass Fiber C = 400cm2 1Q = 1/8" Male Quick Coupling 1Q = 1/8" Male Quick Coupling
D = 500cm2
2C = 1/4" Compression 2C = 1/4" Compression2CE = 1/4" Compression Elbow 2CE = 1/4" Compression Elbow2H = 1/4" Hose barbs 2H = 1/4" Hose barbs2N = 1/4" MNPT 2N = 1/4" MNPT2NO = 1/4" MNPT+EP O-Ring 2NO = 1/4" MNPT+EP O-Ring
3H = 3/8" Hose Barb 3H = 3/8" Hose BarbLF = Female Luer Lock LF = Female Luer Lock LFE = Female Luer Lock Elbow LFE = Female Luer Lock ElbowMT = 1/2" Tri clamps MT = 1/2" Tri clamps
P = Polypropylene Media
Example - MKH Series PTFE HEPA 500cm2 1/4" Hose Barb I/O is MKHFD2H2H
60mm Diameter
-NO = No vent or Drain Outlet fitting
-N= No vent or Drain fittings
1QE = 1/8" Male Quick Coupling Elbow
1QE = 1/8" Male Quick Coupling Elbow
-NI = No vent or Drain inlet fitting
G and P Media are only
available in Surface Area "C" (400cm2)
2QE = 1/4" Male Quick Coupling for Metal latch Elbow
2QE = 1/4" Male Quick Coupling for Metal latch Elbow
2QF = 1/4" Female Quick Coupling with Metal latch
2QF = 1/4" Female Quick Coupling with Metal latch
-GP = Gamma Stable Polypropylene Shell
-E = Polyethylene Shell and PET media support for Gamma Sterilization
2Q = 1/4" Male Quick Coupling for Metal latch
2Q = 1/4" Male Quick Coupling for Metal latch
PureFlo Capsule Filters
Filter Media Length Option
E = Polyethylene H = 1 5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSKH F = PTFE S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT
G = Glass Fiber L = 5" 1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latchE = 7.5" 1QF = 1/8" Female Quick Coupling w/Metal latch 1QF = 1/8" Female Quick Coupling w/Metal latchK = 10" 2C = 1/4" Compression 2C = 1/4" Compression
2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting2N = 1/4" MNPT 2N = 1/4" MNPT2NF = 1/4" FNPT 2NF = 1/4" FNPT2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling w/Metal latch 2QF = 1/4" Female Quick Coupling w/Metal latch2QFP = 1/4" Female Quick Coupling w/Plastic latch 2QFP = 1/4" Female Quick Coupling w/Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3C = 3/8" Compression 3C = 3/8" Compression3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT4C = 1/2" Compression 4C = 1/2" Compression -OE = O-ring EPDM4H = 1/2" Hose Barb 4H = 1/2" Hose Barb -ON = O-ring Nitrile4N = 1/2" MNPT 4N = 1/2" MNPT -OV = O-ring Viton4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
Example - 2.5" Glass Fiber HEPA rated Capsule with 1/2" Hose Barb fittings would be SKHGHS4H4H
M ale Quick Coup ings are molded, Female Quick Coupling with Plastic latch will be threaded on, compat ble w th CPC (Colder), LinkTech and other compatible couplings.
Input Fitting Output Fitting
70mm Diameter Capsule
-E = Polyethylene Shell and PET media support for Gamma Sterilization
-GP = Gamma Stable Polypropylene Shell
-N= No vent or Drain fittings
-NI = No vent or Drain inlet fitting
-NO = No vent or Drain Outlet fitting
Blank = O-ring Silicon (Standard)
O-Ring for Quick Coupling
P = Polypropylene Media
PureFlo SK Series HEPA Filter Capsule Ordering Guide
MK Series Filter
SK Series Filter
Page 67
PureFlo® Carbon Fiber / HEPA Capsules
ZenPure Ze
nPur
e
PureFlo® Carbon Fiber / HEPA capsules are designed to remove volatile organic compounds, hydrocarbons, chlorine, color, and odors from gases and aqueous or organic liquids. This fibrous carbon media is designed for maximum flow and contaminant removal to elimi-nate potential health hazards. The carbon fiber can be followed by HEPA rated media to also filter the gas while purifying it. The carbon fiber allows for highly efficient contact time and adsorption capacity. Designed with clean, durable polypropylene support structure to provide superior down stream cleanliness. No adhesives, binders, or surfactants are used in the manufacturing process. Each capsule is manufactured under tight process control to give you a uniform prod-uct with every filter. These activated carbon filters are available in a range of lengths and connections to suit your individual purification and filtration needs.
Applications Gas purification Liquid purification
Fine Chemicals Water
Reagent Purification Pharmaceuticals
Odor removal Biologics
Vacuum pumps Outlet exhaust
Materials of Construction Media: Fibrous Activated Carbon and HEPA media Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene Fitting Connections: MNPT, FNPT, Compression, Sanitary Flange, Hose Barb
Dimensions (TC fittings) Length: 1.5 in (128 mm) Length: 2.5 in (155 mm) Length: 5.0 in (210 mm) Length: 7.5 in (270 mm) Length: 10 in (340mm) Diameter: 2.75 in (70 mm)
Effective Purification volume 1.5 in 0.65 grams 2.5 in 1.3 grams 5.0 in 2.7 grams 7.5 in 4.0 grams 10.0 in 5.2 grams
Operating Conditions Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C Maximum Operating Temperature: 140°F/60°C
Features Benefits ■ Carbon Fiber ■ Greater surface area to trap VOC’s than granular carbon
■ Faster kinetics for VOC absorption since the VOCs do not need to travel as far in the structure as granular carbon
■ Light weight and high surface area, for lower pressure drop ■ more porous for 100 times more accessible for VOC than granular
activated carbon
■ HEPA filtration ■ Removes 0.3 μm in size with an efficiency rating of 99.97%. ■ Low hold-up volume reduces chemical waste ■ Reduced handling of hazardous chemicals
■ Compact ■ Disposable unit to easily change out ■ Several fittings to choose from
Autoclavable & Sanitizable Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Page 68
ZenPure PureFlo® Carbon Fiber / HEPA Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B15.5 Rev 2011.08
PureFlo Carbon Fiber Filter Capsule Ordering Guide
Regulatory Compliance Manufactured from materials that conform to the re-quirements of 21CFR Part 177 of the U.S. Code of Fed-eral Regulations and USP Class VI Biological test for Plastic
PureFlo Capsule Filters
Filter Media HEPA Filter Media
Internal HEPA Filter Capsule Length Option
1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSK E = Polyethylene H = 1.5" H = 1.5"* 1NF = 1/8" FNPT 1NF = 1/8" FNPT
F = PTFE S = 2.5" S = 2.5" 2C = 1/4" Compression 2C = 1/4" CompressionG = Glass Fiber L = 5" 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbsP = Polypropylene E= 7.5" 2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs
K = 10" 2L = Large Female Luer Lock fitting 2L = Large Female Luer Lock fitting2N = 1/4" MNPT 2N = 1/4" MNPT2NF = 1/4" FNPT 2NF = 1/4" FNPT2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling w/ Metal latch 2QF = 1/4" Female Quick Coupling w/ Metal latch2QFP = 1/4" Female Quick Coupling w/ Plastic latch 2QFP = 1/4" Female Quick Coupling w/ Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3C = 3/8" Compression 3C = 3/8" Compression3H = 3/8" Hose Barb 3H = 3/8" Hose Barb3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT4C = 1/2" Compression 4C = 1/2" Compression4H = 1/2" Hose Barb 4H = 1/2" Hose Barb -OE = O-ring EPDM4N = 1/2" MNPT 4N = 1/2" MNPT -ON = O-ring Nitrile4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latch -OV = O-ring VitonMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
Blank = for Carbon only
O-Ring for Quick Coupling
Input Fitting
M ale Quick Couplings are molded, Female Quick Coupling with Plastic latch w ll be threaded on, compatible with CPC (Colder), LinkTech and other compatible couplings.
Output Fitting
Example - 5" Carbon/HEPA capsule with a Glass Fiber HEPA 1.5" internal filter with 1/2" Hose Barb fittings I/O would be SKCHGHL4H4H
CH = Activated Carbon Fiber with HEPA Filter *
70mm Diameter Capsule
-NI = No vent or Drain inlet fitting
-E = Polyethylene Shell and PET media support for Gamma Sterilization
Blank = for Carbon only
Blank = O-ring Silicon (Standard)
-N= No vent or Drain fittings
-GP = Gamma Stable Polypropylene Shell
* - Size H for Carbon Fiber
only
-NO = No vent or Drain Outlet fitting
C = Activated Carbon Fiber only
PureFlo Capsule Filters
Filter Media Option
MK
2QF = 1/4" Female Quick Coupling with Metal latch
2QF = 1/4" Female Quick Coupling with Metal latch
2NO = 1/4" MNPT+EP O-Ring2N = 1/4" MNPT2H = 1/4" Hose barbs
C = Activated Carbon Fiber
1H = 1/8" Hose Barb1Q = 1/8" Male Quick Coupling
1QE = 1/8" Male Quick Coupling Elbow
60mm Diameter Capsule
1QE = 1/8" Male Quick Coupling Elbow
2CE = 1/4" Compression Elbow2H = 1/4" Hose barbs2N = 1/4" MNPT2NO = 1/4" MNPT+EP O-Ring
1C = 1/8" Compression
2QE = 1/4" Male Quick Coupling for Metal latch Elbow
3H = 3/8" Hose BarbLF = Female Luer Lock LFE = Female Luer Lock Elbow
2Q = 1/4" Male Quick Coupling for Metal latch
MT = 1/2" Tri clamps
2QE = 1/4" Male Quick Coupling for Metal latch Elbow
3H = 3/8" Hose Barb
Inlet Fitting Outlet Fitting
1C = 1/8" Compression1H = 1/8" Hose Barb1Q = 1/8" Male Quick Coupling
2C = 1/4" Compression
LF = Female Luer Lock LFE = Female Luer Lock ElbowMT = 1/2" Tri clamps
2C = 1/4" Compression2CE = 1/4" Compression Elbow
Example - MKL Series Capsule Carbon Fiber Capsule with 1/4" Hose Barb fittings would be MKC2H2H
-N = No vent or Drain fittings
-NI = No vent or Drain inlet fitting
-NO = No vent or Drain Outlet fitting
-GP = Gamma Stable Polypropylene Shell
-E = Polyethylene Shell and PET media support for Gamma Sterilization
2Q = 1/4" Male Quick Coupling for Metal latch
Page 69
PureFlo Lenticular Cloud Filters (Cellulose Media)
ZenPure Ze
nPur
e
Unique Depth Filtration
PureFlo® Lenticular Cloud Filters have been de-signed for simple, quick, and efficient filtration of fluids used in laboratory, pilot, and small-scale applications. The family of products is par-ticularly suitable for high loading liquid applica-tions. The compact design of the filters with re-spect to the filtration area, reduces hold-up vol-ume and optimizes performance. Eleven differ-ent pore size options can be placed in an all-polypropylene construction for excellent chemi-cal compatibility. There are numerous different fitting options for each of the different filters.
The cellulose depth media is structured in a stacked disc format to provide optimal flow. No adhesives, binders, or surfactants are used in the construction process. The unit is thermally-sealed to ensure integrity.
There are several filter options available for laboratory testing to production:
�� D65 (Disc capsule) �� SKL/ SKV (Mini Capsule) �� Mini Cartidge �� ZenCap (Full Size Capsule) �� Full Size Cartridge
Applications Vaccines Chemicals Lab scale testing Purified Protein Bio Bags Pharmaceuticals Fine Chemicals Biologics Vent Filter Scale up processing Water Cell Separation
SHEET RETENTION AND PERMEABILITY RATINGS
(setaR
noitneteRlanimo
Nμ
)m
FilterGrades
0
6.0
8.0
7.0
5.0
4.0
3.0
2.0
1.0
9.0
10.0
6.0
4 0
3.0
2.5
1.5
0.850.600.500.400.15
mL[ytilibae
mreP2-
nim
1-]
FilterGrades
0
1500
2000
1750
1250
1000
750
500
250
22502020
1390
950
640
435
295200
956444
10.0
4340
0.15 0.40 0.50 0.60 0.85 1.5 2.5 3.0 4.0 6.0
Page 70
ZenPure PureFlo Lenticular Cloud Filters
Operating Conditions: Max. Working Pressure:
PP/HDPE/PVC 80 PSID @ 77°F/25°C (5.5 bar) Gamma PP 45 PSID @ 77°F/25°C (3.1 bar)
Minimum burst pressure: PP/HDPE: 120 PSID @ 77° F/25°C (8.3 bar) Gamma PP: 60 PSID @ 77°F/25°C (4.1 bar)
Maximum forward differential pressure: 60 PSID (4.1 bar) at 68°F (20°C) 30 PSID (2.1 bar) at 176°F (80°C) Maximum reverse differential pressure: 30 PSIG (2.1 bar) at 68°F (20°C)
Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C PVC: 122°F/50°C
Autoclavable & Sanitizable: Capsules can be autoclaved 3 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and tem-perature). Capsules must not be in situ steam-sterilized.
D65 Disc Capsule
PureFlo® D65 Lenticular Cloud capsules with cellulosic media is available in multiple filtra-tion pore sizes. The small size of the D65 al-lows for laboratory and small scale testing for proof of filtration. The inlet and outlet ports are available with 18 fittings options, eliminat-ing the need for transition connectors. This self contained disposable filter can be supplied with your choice of 11 pore sizes to optimize your filtration process.
015 = 0.15 1H = 1/8" Hose Barb 1H = 1/8" Hose Barb Blank = Polypropylene Shell040 = 0.40 1NF = 1/8" FNPT 1NF = 1/8" FNPT -GP = Gamma stabilized PP
ll050 = 0.50 1Q = 1/8" Male Quick Coupling 1Q = 1/8" Male Quick Coupling -NY = Nylon Shell060 = 0.60 1QF = 1/8" Female Quick 1QF = 1/8" Female Quick Coupling085 = 0.85 2H = 1/4"-5/16" Hose Barb 2H = 1/4"-5/16" Hose Barb150 = 1.50 2N = 1/4" MNPT 2N = 1/4" MNPT250 = 2.50 2NF = 1/4" FNPT 2NF = 1/4" FNPT -1 = Single Bagged300 = 3.00 -NV= No vent fitting400 = 4.00 -FB = Filling Bell (with 2H 600 = 6.00 -FC = Filling Bell with Cap
01X = 10.0* -BLK = Black PP Shell3H = 5/16-3/8" Hose Barb 3H = 5/16-3/8" Hose Barb3N = 3/8" MNPT 3N = 3/8" MNPT3NF = 3/8" FNPT 3NF = 3/8" FNPT4N = 1/2" MNPT 4N = 1/2" MNPTFV = Female Ventilator FV = Female VentilatorLF = Female Luer Lock LF = Female Luer Lock MT = 1/2" Tri Clamp MT = 1/2" Tri Clamp -OE = O-ring EPDMMV = Male Ventilator MV = Male Ventilator -ON = O-ring NitrileTC = 1.5" Tri Clamp TC = 1.5" Tri Clamp -OV = O-ring Viton
Nominal Pore size (Micron)
* - Does not have DE
Example – 1.50 Micron Celulose Filter Media with 1/2" tri clamp fittings would be D65CEP150MTMT
CEP = Celulose with DE Blend
Blank = O-ring Silicon (Standard)
D65
Lenticular Cloud =
65mm Disc filter
-E = Polyethylene Shell and HDPE media support for gamma sterilization
2Q = 1/4" Male Quick Coupling for Metal latch
2Q = 1/4" Male Quick Coupling for Metal latch
2QF = 1/4" Female Quick Coupling with Metal latch
2QF = 1/4" Female Quick Coupling with Metal latch
-ETO = Ethylene oxide sterilization
Oring for Quick Coupling
PureFlo D65 Lenticular Cloud Disc
Filters
Filter Media Input Fitting Output Fitting Options
Specifications Materials of Construction: Media: Cellulose Media Supports: Polypropylene Shell: Polypropylene
Sealing: Thermally-welded Effective Filtration Area : 4in2 (26cm2) Dimensions: 65mm (2.87in) Available Ratings: 0.15um to 10um
Regulatory Compliance: The filters are constructed with polypropylene resins and fil-
tration media in compliance with 21CFR of the US Code of Federal Regulations and USP Class VI Biological Test for Plas-tic. (Except Blk PP and PVC)
PureFlo D65 Lenticular Cloud Filter Capsule Ordering Guide
A9.1 Rev 2011.08
Page 71
ZenPure PureFlo Lenticular Cloud Filters
PureFlo SKV Lenticular Cloud Filter Capsule Ordering Guide
Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 5 bar (72psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C
Maximum Operating Temperature: 140°F/60°CAutoclavable & Sanitizable:
Capsules can be autoclaved 3 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Specifications
Materials of Construction: Media: Cellulose Media Supports: Polypropylene Shell: Polypropylene
Sealing: Thermally-welded Effective Filtration Area : 18.6-140in2 (120-900cm2) Dimensions: 2.75 in (70mm) Available Ratings: 0.15um to 10um
Regulatory Compliance: The filters are constructed with poly-propylene resins and filtration media in compliance with 21CFR of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
SKV Series Capsule
PureFlo® SKV Lenticular Cloud capsules with cellulosic media is the next size up with 5 cap-sule sizes to choose ranging from 120-900 cm2. This medium size capsule allows for pilot to medium scale production. The inlet and outlet ports are available with 17 fittings op-tions, eliminating the need for transition con-nectors. The SKV series capsule has an ad-justable, easy to turn upstream bleed values with an o-ring seal and hose barb connections allowing for easy process control. These cap-sules eliminate the time and expense associ-ated with assembling and cleaning stainless steel housings.
PureFlo Capsule Filters
Filter Media Nominal Pore size (Micron)
Effective Media Area Option
015 = 0.15 H = 120cm2 1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSKV 040 = 0.40 S = 250cm2 1NF = 1/8" FNPT 1NF = 1/8" FNPT
050 = 0.50 L = 450cm2 1Q = 1/8" Male Quick Coupling w/Metal Latch 1Q = 1/8" Male Quick Coupling w/Metal Latch -E = Polyethylene Shell 060 = 0.60 E= 700cm2 1QF = 1/8" Female Quick Coupling with Metal latch 1QF = 1/8" Female Quick Coupling with Metal latch085 = 0.85 K = 900cm2 2H = 1/4" Hose barb 2H = 1/4" Hose barb150 = 1.50 2N = 1/4" MNPT 2N = 1/4" MNPT -FB = Filling Bell250 = 2.50 2NF = 1/4" FNPT 2NF = 1/4" FNPT -FC = Filling Bell w/Cap300 = 3.00 2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch400 = 4.00 2QF = 1/4" Female Quick Coupling w/Metal latch 2QF = 1/4" Female Quick Coupling w/Metal latch600 = 6.00 2QFP = 1/4" Female Quick Coupling w/Plastic latch 2QFP = 1/4" Female Quick Coupling w/Plastic latch01X = 10.0* 2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch
3H = 3/8" Hose Barb 3H = 3/8" Hose Barb3NF = 3/8" FNPT 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4H = 1/2" Hose Barb4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latch O-Ring for Quick CouplingMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
-OE = O-ring EPDM-ON = O-ring Nitrile-OV = O-ring Viton
Input Fitting Output Fitting
Blank = Polypro construction
-GP = Gamma stable polypropylene shell
-ETO = Ethylene oxide sterilization
-N= No vent or drain fittings
70mm Diameter Capsule
w/Bleed valve
-NI = No vent or drain inlet fitting
-NO = No vent or drain Outlet fitting
Example - PureFlo SKV Lenticular Cloud Series Capsule Celulose with DE 0.40um 250cm2 3/8" Hose barb I/O would be SKVCE0403H3HQuick Couplings are molded on. Female Quick Coupling with Plastic latch will be threaded on. Compatible with CPC (Colder) LinkTech and others.
CEP =Celulose with
DE Blend
* - Does not have DE
Blank = O-ring Silicon (Standard)
b15.8.1 Rev 2011.08
Page 72
ZenPure PureFlo Lenticular Cloud Filters
PureFlo SKL Lenticular Cloud Filter Capsule Ordering Guide
Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C
Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C
Maximum Operating Temperature: 140°F/60°C
Autoclavable & Sanitizable: Capsules can be autoclaved 3 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitiz-ing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized
Specifications
Materials of Construction: Media: Cellulose Media Supports: Polypropylene Shell: Polypropylene
Sealing: Thermally-welded
Effective Filtration Area : 18.6-140in2 (120-900cm2)
Dimensions: 2.75 in (70mm)
Available Ratings: 0.15um to 10um
Regulatory Compliance: The filters are constructed with polypropyl-ene resins and filtration media in compli-ance with 21CFR of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
SKL Series Capsule
PureFlo® SKL Lenticular Cloud capsules with cellulosic media has 5 capsule sizes to choose from. This is a wide range of filtration area from 120-900 cm2. This medium size capsule allows for pilot to medium scale production. The inlet and outlet ports are available with 17 fittings options, eliminating the need for tran-sition connectors. The SKL series capsule has luer lock upstream vent and drain connec-tions, allowing for easy process control. These capsules eliminate the time and expense asso-ciated with assembling and cleaning stainless steel housings.
PureFlo Capsule Filters
Capsule Version Filter Media
Nominal Pore size (Micron)
Effective Media Area Option
015 = 0.15 H = 120cm2 1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSK 040 = 0.40 S = 250cm2 1NF = 1/8" FNPT 1NF = 1/8" FNPT
050 = 0.50 L = 450cm2 1Q = 1/8" Male Quick Coupling w/Metal Latch 1Q = 1/8" Male Quick Coupling w/Metal Latch -E = Polyethylene Shell 060 = 0.60 E= 700cm2 1QF = 1/8" Female Quick Coupling with Metal lat 1QF = 1/8" Female Quick Coupling with Metal la085 = 0.85 K = 900cm2 2C = 1/4" Compression 2C = 1/4" Compression150 = 1.50 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs -FB = Filling Bell250 = 2.50 2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs -FC = Filling Bell w/Cap300 = 3.00 2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting400 = 4.00 2N = 1/4" MNPT 2N = 1/4" MNPT600 = 6.00 2NF = 1/4" FNPT 2NF = 1/4" FNPT01X = 10.0* 2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch -N= No vent or drain
2QF = 1/4" Female Quick Coupling with Metal lat 2QF = 1/4" Female Quick Coupling with Metal la2QFP = 1/4" Female Quick Coupling with Plastic 2QFP = 1/4" Female Quick Coupling with Plastic2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch3C = 3/8" Compression 3C = 3/8" Compression3H = 3/8" Hose Barb 3H = 3/8" Hose Barb3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT O-Ring for Quick 4C = 1/2" Compression 4C = 1/2" Compression4H = 1/2" Hose Barb 4H = 1/2" Hose Barb4N = 1/2" MNPT 4N = 1/2" MNPT -OE = O-ring EPDM4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latch-ON = O-ring NitrileMT = 1/2" Tri clamps MT = 1/2" Tri clamps -OV = O-ring VitonTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
70mm Diameter Capsule
-NI = No vent or drain inlet fitting
-NO = No vent or drain Outlet fitting
Example - PureFlo SKL Lenticular Series Capsule Celulose with DE 0.40um 250cm2 3/8" Hose barb I/O would be SKLCE0403H3H
Blank = O-ring Silicon (Standard)
* - Does not have DE
Input Fitting (not all fittings avalible in all options) Output Fitting
-GP = Gamma stable polypropylene shell
Blank = Polypro construction
P = M8 Plug or 1/4" Compression fitting Vent/Drain -ETO = Ethylene oxide
sterilization
CEP =Celulose with DE Blend
L = Luer Lock Vent/Drain
Quick Couplings are molded on. Female Quick Coupling with Plastic latch will be threaded on. Compatible with CPC (Colder) LinkTech and others.
b15.8.2 Rev 2011.08 Page 73
ZenPure PureFlo Lenticular Cloud Filters
Mini-Cartridge Series
PureFlo® Lenticular Cloud Mini-cartridges with cellulosic media has 3 filter sizes to choose ranging from 120-900 cm2. This size cartridge allows for pilot to medium scale production. These filters are available with the 7 most common configuration options for your hous-ings. These cartridges can be quickly and eas-ily installed.
The PureFlo Lenticular Cloud Mini-cartridges are highly retentive, designed for high loading applications. The filter is made using cellulose media with an all polypropylene construction. They are well suited for critical applications where superior flow, lifetime, and holding ca-pacity are required. No additional adhesives, binders, or surfactants are used in the manu-facturing process.
PureFlo Mini Lenticular Cloud Filter Cartridges
Removal Rating (micron)
End Modifications Length O-Ring / Gasket Materials Package Qty
015 = 0.15 A = 116 Inner O-Ring H = 1.5" E = EPDM 2P = 2pc/ pack (5")040 = 0.40 C = 015 O-Ring S = 2.5" N = Buna N050 = 0.50 D = 1/2" MNPT L= 5" S = Silicone060 = 0.60 E = 118 O-Ring U = TES085 = 0.85 F = Flange* V = Fluro-Elastomer Option150 = 1.50 O = O-Ringless - 5 = SS Insert250 = 2.50300 = 3.00 N = 116 Inner Housing Seal400 = 4.00600 = 6.00
01X = 10.0*
* - Does not have DE
MCEP = Mini Cellulosic Media
3P = 3pc/ pack (1.5" and 2.5")
Example - A 3 pack of 2.5", 3 micorn filters with 116 Internal EPDM o-ring would be MCEP300 ASE3P * - F end mondification is compatible to fit in a PALL SealKleenTM Housing, **- M end modification is compatible to it in a Millipore OptiSealTM Housing
M = 123 O-Rings with hold down tabs**
S = 116 Inner O-Ring w/locking groove
PureFlo Mini Lenticular Cloud Filter Cartridge Ordering Guide
Specifications Materials of Construction: Media: Cellulose Media Supports: Polypropylene Shell: Polypropylene
Sealing: Thermally-welded Effective Filtration Area : 18.6-140in2 (120-900cm2) Dimensions: 2.2 in (56mm) Available Ratings: 0.15um to 10um
Operating Conditions: Maximum Forward Differential Pressure: 3 bar (43.5 psid) at 20°C Maximum Reverse Differential Pressure: 2.0 bar (29 psid) at 20°C Maximum Operating Temperature: 140°F/60°C
Autoclavable & Sanitizable: Capsules can be autoclaved 3 times at 257°F/
125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature).
Regulatory Compliance: The filters are constructed with polypropylene
resins and filtration media in compliance with 21CFR of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
b15.8.3 Rev 2011.08
Page 74
ZenPure PureFlo Lenticular Cloud Filters
PureFlo Glass Micro-fiber Filter Cartridges
Removal Rating (micron)
End Modifications LengthO-Ring / Gasket
MaterialsPackage Qty Inserts
015 = 0.15 0 = 222 O-Ring Flat 1 - 10" E = EPDM 1 = 1pc/ pack Blank = Standard040 = 0.40 5 = 222 O-Ring Spear 2 - 20" N = Buna N - 5 = SS Insert050 = 0.50 6 = 226 O-Ring Flat 3 - 30" S = Silicone060 = 0.60 7 = 226 O-Ring Spear 4 - 40" V = Viton085 = 0.85 F = DOE Flat Gasket 5 = 5" T = TEV*150 = 1.50 S = SOE Flat Gasket 9 = 9.75" U = TES*250 = 2.50 Z = SOE Internal 213 O-ring Flat **300 = 3.00400 = 4.00600 = 6.0001X = 10.0*
CEP = Cellulosic Media
* - Does not have DE
Example - Cellulosic Media Cartridge, 10", 3.0 micron cartridge, w ith 2-222 Silicone o-ring, Flat end cap, and no insert w ould be CEP3001S1* - not av ailable in Code Z ** - only av ailable in 5", 10" and 20"
Lenticular Cloud Cartridge Series
PureFlo® Lenticular Cloud cartridges with cel-lulosic media can be made from 5-40 inches. This full size cartridge allows for manufactur-ing production. This filter can be incorporated in a standard housing. A special Lenticular housing is not required for this filter.They can also be incorporated into multi-round housings for additional filtration area.
The PureFlo Lenticular Cloud cartridges are highly retentive, designed for high loading ap-plications. The filter is made using cellulose media with an all polypropylene construction. They are well suited for critical applications where superior flow, lifetime, and holding ca-pacity are required. No additional adhesives, binders, or surfactants are used in the manu-facturing process.
ZenCap Lenticular Cloud Filter Cartridge Ordering Guide
Specifications Materials of Construction: Media: Cellulose Media Supports: Polypropylene Shell: Polypropylene
Sealing: Thermally-welded Effective Filtration Area: 155-620in2 (1000-4000cm2) Dimensions: 2.75 in (70mm) Available Ratings: 0.15um to 10um
Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 5 bar (72psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C
Maximum Operating Temperature: 140°F/60°C
Autoclavable & Sanitizable: Capsules can be autoclaved 3 times at 257°F/ 125°C for
30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature).
Regulatory Compliance: The filters are constructed with polypropyl-ene resins and filtration media in compliance with 21CFR of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
b15.8.5 Rev 2011.08
Page 75
ZenPure PureFlo Lenticular Cloud Filters
ZenCap 10-40 inch Disposable
PureFlo® ZenCap Lenticular Cloud capsules with cellulosic media is a full size capsule. Sizes range from 10-40 inches in length. This full size capsule allows for manufacturing production. The inlet and outlet ports are available with 9 fittings options that can be mixed and matched, eliminating the need for transition connectors. The ZenCap series capsule has an adjustable, easy to turn up and downstream bleed value with an o-ring seal and hose barb connections allowing for easy process control. These capsules eliminate the time and expense associated with as-sembling and cleaning stainless steel housings.
They can be built in a T-style or In-line configuration. The filtra-tion shell is an all polypropylene construction that provides ex-cellent chemical compatibility with low extractables. No adhe-sives, binders, or surfactants are used in the manufacturing process.
ZenCap Capsule Series
Configuration Length Filter Media Pore size (Micron) Vents ** Input Fitting Output Fitting Construction Material
1 - 10" 015 = 0.15 A = No v ents 3H = 3/8" Hose Barb 3H = 3/8" Hose Barb Blank = Poly propy lene L I = In-Line* 2 - 20" 040 = 0.40 B = 1/2" Sanitary v ent 4H = 1/2-9/16" Hose Barb -E = Poly ethy lene
3 - 30" 050 = 0.50 4Q = 1/2" Male Quick Connect 4Q = 1/2" Male Quick Connect4 - 40" 060 = 0.60 5H = 5/8" Hose Barb 5H = 5/8" Hose Barb
085 = 0.85 6H = 3/4" (19mm) Hose Barb 6H = 3/4" (19mm) Hose Barb -N = Ny lon 150 = 1.50 8H = 1" (25mm) Hose Barb 8H = 1" (25mm) Hose Barb250 = 2.50 4QP = 1/2" Male Quick connect 4QP = 1/2" Male Quick connect300 = 3.00 TC = 1-1/2" Tri-Clamp TC = 1-1/2" Tri-Clamp400 = 4.00600 = 6.0001X = 10.0*
G = Inlet 1/4" Bleed Valv e O-Rings H = Outlet 1/4" Bleed Valv e
-OE = O-Ring EPDM-ON = O-Ring Nitrile-OV = O-Ring Viton
D = 1/2" Sanitary v ent, w ith Inlet 1/4" Bleed Valv e E = 1/2" Sanitary v ent, w ith dow n stream 1/4" Bleed Valv e F = Inlet and Outlet 1/4" Bleed Valv e
90mm Diameter Capsule w ith Bleed Valv e
* Av ailable in 2011
Example 1 - ZenCAP L Series Capsule, T-Line, Cellulose 1.5um, 20" filter, w ith all v ent and drains, 1.5" Tri-Clamp fittings I/O, w ould be LT2CEP150CTCTCExample 2 - ZenCAP L Series Capsule, T-Line, Cellulose 1.5um, 10" filter, w ith all v ent and drains, 1.5" Tri-Clamp fittings I/O, w ould be LT1CEP150CTCTC
**Note: /4" Drain bleed Valve standard on all filters Except for option A
Blank = O-Ring Silicon (Standard)* - Does not
have DE
T = T-Line C = 1/2" Sanitary vent, with Inlet and Outlet 1/4" Bleed Valve
-GP = Gamma Stable Poly propy lene
CEP =Celulose w th
DE Blend
ZenCap Lenticular Cloud Filter Capsule Ordering Guide
Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 5 bar (72psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C
Maximum Operating Temperature: 140°F/60°C
Autoclavable & Sanitizable: Capsules can be autoclaved 3 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitiz-ing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized
Specifications
Materials of Construction: Media: Cellulose Media Supports: Polypropylene Shell: Polypropylene
Sealing: Thermally-welded Effective Filtration Area : 155-620in2 (1000-4000cm2) Dimensions: 3.54 in (90mm) Available Ratings: 0.15um to 10um Regulatory Compliance: The filters are constructed with polypropyl-
ene resins and filtration media in compli-ance with 21CFR of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
b15.8.4 Rev 2011.08 Page 76
ZenPure PureFlo Lenticular Cloud Filters
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
b15.8 Rev 2011.08 Page 77
ZenCap® Full Size Capsules
ZenPure Ze
nPur
e
10”-40” Disposable Process Filtration
ZenCap® capsule filter assemblies are ready-to-use, full size filters that offer high flows, increased throughputs, high strength, all with the convenience and cleanliness of a disposable and easy-to-install filter assembly. De-signed for pre-filtration, clarification, and final filtration of medium to large scale batches (100L to 5000L), in the pharmaceutical, biotechnology, food and beverage, medi-cal, chemical, and DI water.
ZenCap® capsule assemblies are available with a wide range of hydrophilic and hydrophobic filter media and pore sizes for liquid, gas, and venting applications. Proc-ess engineers can choose from 12 filtration medias to create any combination of integrated filtration train.These will allow the disposable processing to become truly flexible, clean, and optimal.
They can be built in a T-style or In-line configuration with nine inlet and outlet fitting connections that can be mixed and matched. The filtration shell is an all-polypropylene construction that provides excellent chemical compatibil-ity with low extractables. The shell and supports can also be constructed in nylon, polyethylene or gamma sta-bilized PP shells for additional compatibility. No adhe-sives, binders, or surfactants are used in the manufactur-ing
Specifications
Materials of Construction: Media: Charged Nylon, Depth PP, Polyethylene, PTFE, Glass Fiber, PP Membrane, Cellulose, Nylon, Nylon Screen, PP media, PES, and Polyester Screen Media Supports: Polypropylene, PET, Nylon, or HDPE Shell, Cage, Core, End Caps: Polypropylene, Nylon, or HDPE Sealing: Thermally bonded
Fitting Connections: Nine Fittings - See Ordering Guide for availability. (Custom adaptors available upon request)
Nominal Dimensions: Lengths: 10”, 20”, 30”, 40” Diameter: 3.54” (90mm)
Effective Filtration Area: See Cartridge Datasheet for more information (Dependent on Media)
Available Ratings: 0.04um - 200.0um (Dependent on Media)
Operating Conditions: Maximum Forward Differential Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 5 bar (72psi) at 68°F/20°C Maximum Reverse Differential Pressure: 3.0 bar (44psi) at 68°F/20°C
Maximum Operating Temperature: PP & Gamma PP: 176°F/80°C HDPE: 140°F/60°C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastics.
Applications
Clarification Water & Wine
Hard Particle Food & Beverages Cell Removal Pharmaceuticals Chemicals Biologics Inks, Dyes Oils, Waters Cosmetics Diagnostics
Page 78
ZenPure ZenCap® Full Size Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
b15.9 Rev 2011.08
PureFlo ZenCap Filter Capsule Ordering Guide
Specifications (cont.)
Autoclavable & Sanitizable: Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and tem-perature). Capsules must not be in situ steam-sterilized.
Bacterial Endotoxin: Effluent is non-pyrogenic per USP Bacterial Endotoxin (0.25 EU/ml), determined using Limulus Amebocyte Lysate (LAL) Test.
ZenCap Capsule Series Configuration Length Filter MediaPore size (Micron)
Vents ** Input Fitting Output Fitting Construction Material
1 - 10" CN = Charged Ny lon A = No v ents 3H = 3/8" Hose Barb 3H = 3/8" Hose Barb Blank = Poly propy lene L I = In-Line 2 - 20" DP = Depth Poly Pro B = 1/2" Sanitary v ent 4H = 1/2" Hose Barb 4H = 1/2" Hose Barb -E = Poly ethy lene
3 - 30" E = Poly ethy lene 4Q = 1/2" Male Quick connect 4Q = 1/2" Male Quick connect4 - 40" F = PTFE 5H = 9/16" Hose Barb 5H = 9/16" Hose Barb
G = Glass Fiber 6H = 3/4" (19mm) Hose Barb 6H = 3/4" (19mm) Hose Barb -N = Ny lon M = Poly Pro Membrane 8H = 1" (25mm) Hose Barb 8H = 1" (25mm) Hose BarbN = Ny lon 4QP = 1/2" Male Quick connect 4QP = 1/2" Male Quick connect OptionsNS = Ny lon Screen TC = 1-1/2" Tri-Clamp TC = 1-1/2" Tri-ClampP = Poly Pro MediaS = PES Orings TS = Poly ester ScreenCEP = Cellulose w ith DE* G = Inlet 1/4" Bleed Valv e
H = Outlet 1/4" Bleed Valv e -OE = O-Ring EPDM-ON = O-Ring Nitrile-OV = O-Ring Viton
D = 1/2" Sanitary v ent, w ith upstream 1/4" Bleed Valv e E = 1/2" Sanitary v ent, w ith dow n stream 1/4" Bleed Valv e F = Inlet and Outlet 1/4" Bleed Valv e Blank = O-Ring Silicon
(Standard)
-ETO = Ethy lene Ox ide Sterilization
Notes: For -E or -GP options, the standard pleat support will be PET for gamma stability ** 1/4" Drain bleed Valve standard on all T-Line filters Except for option A
90mm Diameter Capsule for full size cartridges
C = 1/2" Sanitary vent, with upstream and down stream 1/4" Bleed Valve
Pick From Pore Size
Table
Note: Option B,C, D &E not for In-Line
-GP = Gamma Stable Poly propy lene
T = T-Line
Example 1 - ZenCAP L Series Capsule, T-Line, PES 0.45um/0.2um, 20" filter, with all vent and drains, 1.5" Tri-Clamp fittings I/O, would be LT2S045020CTCTCExample 2 - ZenCAP L Series Capsule, T-Line, GF0.5um/PES 0.2um, 10" filter, with all vent and drains, 1.5" Tri-Clamp fittings I/O, would be LT1G050S020CTCTC
Dimentions in mm
Charged Nylon
Depth PP Polyethylene PTFE Glass Fiber PP Membrane Cellulose w/DE Nylon Nylon Screen
PP Media PESPolyester
Screen005 = 0.05 002 = 0.2 020 = 0.20 010 = 0.1 004 = 0.45 010 = 0.1 015 = 0.15 005 = 0.05 100 = 10 003 = 0.3 004 = 0.04 400 = 40010 = 0.10 005 = 0.5 100 = 1.0 020 = 0.2 005 = 0.5 020 = 0.2 040 = 0.40 010 = 0.10 200 = 20 006 = 0.6 010 = 0.1 600 = 60020 = 0.20 010 = 1.0 150 = 1.5 045 = 0.45 010 = 1.0 050 = 0.50 020 = 0.20 400 = 40 010 = 1.0 020 = 0.2 730 = 73045 = 0.45 015 = 1.5 250 = 2.5 100 = 1.0 030 = 3.0 060 = 0.60 045 = 0.45 600 = 60 030 = 3.0 045= 0.45065 = 0.65 025 = 2.5 300 = 3.0 050 = 5.0 085 = 0.85 065 = 0.65 10X = 100 050 = 5.0 065 = 0.65080 = 0.80 045 = 4.5 500 = 5.0 100 = 10.0 150 = 1.50 080 = 0.80 20X = 200 100 = 10.0 080 = 0.8120 = 1.20 100 = 10 999 = 10.0 200 = 20.0 250 = 2.50 120 = 1.20 200 = 20.0 120 =1.2
200 = 20 300 = 30.0 300 = 3.00 300 = 30.0400 = 4.00 500 = 50.0600 = 6.00 700 = 70.001X = 10.0**
** - Does not hav e DE
Pore size (Micron)
Page 79
PureFlo® Ink Filter Capsules
ZenPure Ze
nPur
e
Specifications Materials of Construction: Media: Polypropylene Media Shell, Cage, Core, End Caps: Polypropylene and Black PP Sealing: Thermally bonded
Fitting Connections: 1/4” Compression (JACO), No Vent
Nominal Dimensions: Lengths: 2.0” (50mm) without fittings Diameter: 3” (77.5mm) Outer Diameter: 3.37” (85.5mm)
Effective Filtration Area: 18.6 in2 (120cm2)
Available Ratings: 1um - 20.0um (Dependent on Media)
Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30 psi) at 68°F/20°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Operating Temperature: 122°F (50°C)
High Performance Ink Filter
PureFlo® Ink Filter Capsules were designed for filtration of standard and UV sensitive inks. This filter is designed to protect print-heads and commercial printing machines. They come in a standard Polypropylene shell as well as a black PP shell to protect light sensi-tive inks.
The ink capsules have a compact design that can incorporate various polypropylene struc-tures to meet the needs of the different ink applications. We are currently offering five different media pore size options. The poly-propylene construction provides excellent compatibility with a wide-range of inks and their components. No adhesives, binders, or surfactants are used in the manufacturing process. All units are thermally-sealed and flushed, dried and packaged to provide a quality product straight out of the box.
Applications UV Sensitive Ink Ink Lab scale testing Chemicals Vent Filter Small volume Water Digital Inkjet Printer
Page 80
ZenPure PureFlo® Ink Filter Capsules
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
S1 Rev 2011.08
PureFlo Ink Filter Capsule Ordering Guide
PureFlo Capsule Filters Filter Media Pore size
(Micron) Inlet Fitting Outlet Fitting Vent Fitting Option
010 = 1.0P = PolyPro Media 030 = 3.0 2C = 1/4" Compression 2C = 1/4" Compression NV = No Vent
050 = 5.0100 = 10.0 -BLK = Black PP Shell200 = 20.0
IFC = Ink Filter Capsule
Blank = Standard PP Shell
Example - Ink Series,PP Media, 3.0um, 1/4" Compression I/O is IFCP0302C2CNV
Dimensional Drawing
Page 81
PureFlo Tank Vent Purifier Capsules (Removal of VOC and CO
2)
ZenPure Ze
nPur
e
Specifications
Materials of Construction: Media: Granular Soda Lime and Activated Carbon Fiber Media Supports: Polypropylene Shell, Cage, Core, and End Caps: Polypropylene Fitting Connections: Hose Barb, NPT, Compression Quick Couplings, and Sanitary, Tube Stub.
Any inlet/outlet combinations. (Custom adaptors available upon request) No Vent or Drain fittings
Nominal Dimensions: Length: 1.5 in (128 mm), Length: 2.5 in (155 mm), Length: 5.0 in (210 mm), Length: 7.5 in (270mm), Length: 10 in (340mm), Diameter: 2.75 in (70 mm)
Operating Conditions: Maximum Forward Differential Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30psi) at 68°F/20°C
Maximum Operating Temperature: 140°F/60°C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Air Purification Filter
PureFlo® Tank Vent Purifier capsules are de-signed to remove volatile organic compounds, hy-drocarbons, chlorine, color, and odors and CO2from gases with the use of activated fibrous car-bon media and soda lime. Carbon Dioxide is scrubbed out of the gas as it passes through the media matrix in the capsule. It is designed for maximum flow and contaminant removal to elimi-nate potential health hazards. The carbon fiber and soda lime allows for highly efficient contact time and adsorption capacity. Designed with clean, durable polypropylene support structure to provide superior down stream cleanliness.
No adhesives, binders, or surfactants are used in the manufacturing process. Each capsule is manu-factured under tight process control to give you a uniform product with every filter. These activated carbon filters are available in a range of lengths and connections to suit your individual purification needs.
Applications Tank Vent Air Filter Vacuum pump Beverages Fermentor Pharmaceuticals Fine Chemicals Biologics Incubator Wine Beer Water
Page 82
Your Local Distributor:
ZenPure
s2 Rev 2011.08
PureFlo Tank Vent Purifier Capsules (Removal of VOC and CO
2)
ZenPure
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
PureFlo Capsule Filters
Filter Media Capsule Length Options
1H = 1/8" Hose barbs 1H = 1/8" Hose barbsSK H = 1.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT
S = 2.5" 2C = 1/4" Compression 2C = 1/4" CompressionL = 5" 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbsE = 7.5" 2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbsK = 10" 2L = Large Female Luer Lock f tting 2L = Large Female Luer Lock f tting
2N = 1/4" MNPT 2N = 1/4" MNPT2NF = 1/4" FNPT 2NF = 1/4" FNPT2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch2QF = 1/4" Female Quick Coupling with Metal latch 2QF = 1/4" Female Quick Coupling with Metal latch2QFP = 1/4" Female Quick Coupling w th Plast c latch 2QFP = 1/4" Female Quick Coupling with Plast c latch2QP = 1/4" Male Qu ck Coupling for Plastic latch 2QP = 1/4" Male Qu ck Coupling for Plastic latch3C = 3/8" Compression 3C = 3/8" Compression3H = 3/8" Hose Barb 3H = 3/8" Hose Barb3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow3NF = 3/8" FNPT 3NF = 3/8" FNPT4C = 1/2" Compression 4C = 1/2" Compression4H = 1/2" Hose Barb 4H = 1/2" Hose Barb -OE = O-ring EPDM4N = 1/2" MNPT 4N = 1/2" MNPT -ON = O-ring Nitrile4QP = 1/2" Male Qu ck Coupling for Plastic latch 4QP = 1/2" Male Qu ck Coupling for Plastic latch -OV = O-ring V tonMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp4T = 1/2" Tube Stub 4T = 1/2" Tube Stub
-E = Polyethylene Shell and PET media support for Gamma Sterilizat on
Example - 5", Tank Vent capsule, with 1/2" Tri-clamp fittings I/O would be SKCLMTMTM ale Quick Couplings are molded, Female Quick Coupling with Plastic latch will be threaded on, compatible with CPC (Colder), LinkTech and other compatible couplings.
Input Fitting
-GP = Gamma Stable Polypropylene Shell
Blank = O-ring Silicon (Standard)
O-Ring for Quick Coupling
Output Fitting
CL = Activated Carbon Fiber w/Lime Soda
70mm Diameter Capsule
PureFlo Tank Vent Capsule Ordering Guide
Page 83
PureFlo Shower Capsule Filter
ZenPure Ze
nPur
e
Specifications
Materials of Construction: Media: PES Media Supports: Polypropylene Shell, Cage, Core, and End Caps: Polypropylene O-Rings: Silicone Fitting Connections: Shower Head, Hose Barb, NPT, Compression, Quick Couplings, Sanitary
Any inlet/outlet combinations. (Custom adaptors available upon request) Vent or Drain fittings: M10 Bleed Valve
Nominal Dimensions: Length: 1.5 in (128 mm), Length: 2.5 in (155 mm), Length: 5.0 in (210 mm), Diameter: 2.75 in (70 mm)
Effective Filtration Area: 1.5 in - 0.77 ft2 (650 cm2) 2.5 in - 1.48 ft2 (1200 cm2) 5.0 in - 2.8 ft2 (2400 cm2)
Operating Conditions: Maximum Forward Differential Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Differential Pressure: 5 bar (72psi) at 68°F/20°C Maximum Reverse Differential Pressure: 3 bar (44psi) at 68°F/20°C
Maximum Operating Temperature: 140°F/60°C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Shower Filter
PureFlo® Shower capsule filters are designed to remove particles and bacteria from municipal water sources. These filters can help improve hospital environments where patients have weak-ened immune systems. This filter can help with pseudomonads, legionella and other pathogens for washing, showering, and bathing applications.
The ZenPure PureFlo shower capsule can help meet the strict protocols that hospitals need for high risk patients such as burn or immune defi-ciency victims. This filter provides point of use sterile filtered, potable water directly to the patient. Micro organisms from contaminated water are trapped in the filter.
These filters come with a variety of inlet and outlet fittings for easy installation. The PES mem-brane allows for low pressure drops so the patient gets the proper flow. The 0.2 micron membrane used complies with international HIMA guidelines for sterilizing filters, delivering a sterile filtrate af-ter challenges with 107 Brevundimonas diminuta per capsule.
Applications Hospitals Water Showers Sinks Bathrooms Wash Stations ICU Endoscopy Neonatal Care Unit Birthing Centers
Page 84
Your Local Distributor:
ZenPure
S2.5 Rev 2011.08
PureFlo Shower Capsule Filter
ZenPure
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
PureFlo Shower Capsule Ordering Guide
SPECIFICATIONS
Bacterial RetentionComplete retention of > 107organisms/cm2 of Bre-vundimonas diminuta in accordance with the cur-rent HIMA challenge methodology (ASTM F838-83). Validation Guide upon request.
Autoclavable & SanitizableRecommended to sterilize and verify integrity twice a week to minimize risk of contamination. Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using com-mon sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and tempera-ture). Capsules must not be in situ steam-sterilized.
Water Bubble Point Specification0.1um : 23psi,0.16 MPA (IPA) 0.2um : 47psi,0.32 MPa
Bacterial Endotoxin Effluent is non-Pyrogenic per USP Bacterial En-dotoxin (0.25 EU/ml), determined using Limulus Amebocyte Lysate (LAL) test.
PureFlo Capsule Filters
Shower Filter Media Pore size (Micron)
Internal Filter
Length Options
004 = 0.3 PP Media/0.04 PES H = 1 5" 2H = 1/4" Hose Barbs 2H = 1/4" Hose BarbsSKV 010 = 0.6 PP Media/0.1 PES S = 2.5" 2N = 1/4" MNPT 2N = 1/4" MNPT
020 = 1.0 PP Media/0.2um PES L = 5" 2NF = 1/4" FNPT 2NF = 1/4" FNPT2Q = 1/4" Male Quick Coupling for Metal Latch 2Q = 1/4" Male Quick Coupling for Metal Latch2QF = 1/4" Female Quick Coupling with Metal Latch 2QF = 1/4" Female Quick Coupling with Metal Latch2QFP = 1/4" Female Quick Coupling w/Plastic Latch 2QFP = 1/4" Female Quick Coupling w/Plastic Latch2QP = 1/4" Male Quick Coupling for Plastic Latch 2QP = 1/4" Male Quick Coupling for Plastic Latch2V = 1/4" Walther Male Quick Connect (as shown) 3H = 3/8" Hose Barb 3H = 3/8" Hose Barb 3NF = 3/8" FNPT3NF = 3/8" FNPT 4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT4N = 1/2" MNPT 4QP = 1/2" Male Quick Coupling for Plastic latch4QP = 1/2" Male Quick Coupling for Plastic latch MT = 1/2" Tri-clampsMT = 1/2" Tri-clamps TC = 1-1/2" Tri-clampTC = 1-1/2" Tri-clamp TS = Shower Head (as shown)
70mm Diameter Capsule
Blank = Polypro construction
-ETO = Ethylene oxide sterilization
Example - PureFlo Shower Capsule, PP Media/PES , 2.5" internal filter, 1.0/0.2 micron, with 1/4" Walther Coupling Inlet, Shower Head Outlet, would be SKVPS020S2VTS
PS = PP pre filter/PES final
filter
Note Quick Couplings are molded on. Compatible with CPC (Colder) LinkTech and others.
Output FittingInput Fitting
No adhesives, binders, or surfactants are used in the manufacturing process. Each capsule is manufactured under tight process control to give you a uniform product with every filter.
Page 85
PureFlo Void Capsules
ZenPure Ze
nPur
e
High Hold-up Area Capsules
The PureFlo® Void Capsule has been designed for capture of media inside the body of the cap-sule for easy disposal. The filter can be tailored to specific applications and needs. No filter or a smaller than standard is placed in the capsule to allow for a internal void area. This empty space is utilized for media entrapment. All the differ-ent PureFlo Media can be incorporated in this unique design. There are numerous different fitting options for each of the different capsule styles.
The design of the unit can be used as a liquid trap, settling chamber, media capture, or surge suppression. No adhesives, binders, or surfac-tants are used in the construction process.
Applications Bead Capture Particle Capture Surge Suppression Media Hold-upLiquid Trap Settling Chamber DE Capture Filter Pharmaceutical
Specifications
Materials of Construction: Media: Any ZenPure PureFlo Media Media Supports: Media Dependent Shell, Cage, Core, and End Caps: Polypropylene, Gamma-stabilized
Polypropylene, Polyethylene, Nylon Fitting Connections: Hose Barb, NPT, Compression Quick Couplings, and Sanitary.
Any inlet/outlet combinations. (Custom adaptors available upon request)
Capsule Series: SVL Series: Capsule w/Luer Lock Vent & Drain SVV Series: Capsule w/Bleed Valve Vent & Drain ZenCap Void Series: T-line & I-Line Full Size Capsule
Sterilization: The filters can be sterilized by autoclaving, ETO, and gamma sterilization depending on the construction. Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sanitized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compli-ance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Page 86
ZenPure
PureFlo SVV Void Capsule Ordering Guide
SVV Series Capsule
PureFlo® SVV Void capsules can come with a short or no internal filter to allow for greater hold-up capacity. This can be utilized for hard media particle retention. The inlet and outlet ports are available with 18 fittings options, eliminating the need for transition connectors. The SVV series capsule has two adjustable, easy to turn upstream bleed valves with an o-ring seal and hose barb connections allowing for easy process control and/or sampling.
PureFlo SVV Void Capsule
PureFlo Void Capsule Filter Media Pore size
(Micron)Internal
FilterCapsule Length
* = No Filter * = No Filter H= 1.5" 1H = 1/8" Hose Barbs 1H = 1/8" Hose Barbs Shell Material O-RingsSVV C = Carbon Fiber H = 1.5" S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT -OE = O-ring EPDM
CN = Charged Nylon S = 2.5" L = 5" 1Q = 1/8" Male Quick Coupling w/Metal Latch 1Q = 1/8" Male Quick Coupling w/Metal Latch -ON = O-ring NitrileDP = Depth PolyPro L = 5" E = 7.5" 1QF = 1/8" Female Quick Coupling with Metal Latch 1QF = 1/8" Female Quick Coupling with Metal Latch -E = Polyethylene shell -OV = O-ring VitonE = Polyethylene E = 7.5" K = 10" 2H = 1/4" Hose Barbs 2H = 1/4" Hose BarbsF = PTFE 2N = 1/4" MNPT 2N = 1/4" MNPTG = Glass Fiber 2NF = 1/4" FNPT 2NF = 1/4" FNPT -NY = Nylon ShellM = PolyPro Mem 2Q = 1/4" Male Quick Coupling for Metal Latch 2Q = 1/4" Male Quick Coupling for Metal LatchN = Nylon 2QF = 1/4" Female Quick Coupling with Metal Latch 2QF = 1/4" Female Quick Coupling with Metal Latch SterilizedNP = PP Nanofiber 2QFP = 1/4" Female Quick Coupling w/Plastic Latch 2QFP = 1/4" Female Quick Coupling w/Plastic LatchNS = Nylon Screen 2QP = 1/4" Male Quick Coupling for Plastic Latch 2QP = 1/4" Male Quick Coupling for Plastic LatchP = PolyPro Media 3H = 3/8" Hose Barb 3H = 3/8" Hose Barb S = PES 3NF = 3/8" FNPT 3NF = 3/8" FNPT Vent & DrainTS = Polyester Screen 4H = 1/2" Hose Barb 4H = 1/2" Hose Barb -N= No vent or drain
4N = 1/2" MNPT 4N = 1/2" MNPT Filling Bell4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latch -FB = Filling Bell*MT = 1/2" Tri-clamps MT = 1/2" Tri-clamps -FC = Filling Bell w/Cap*TC = 1-1/2" Tri-clamp TC = 1-1/2" Tri-clamp
70mm Diameter Capsule with Bleed Valve
Blank = No Filter
Pick From Pore Size
Table
Blank = O-ring Silicon (Standard)
G(pore Size)= Glass Fiber PreFilter
P(pore Size)= PolyPro Media PreFilter
S(pore Size) = PES PreFilter
Example - PureFlo SVV Void Capsule, Polyester Screen, 30um , 1.5" internal filter, 5" shell, with 1.5" Tri-Clamp fittings I/O, would be SVVTS300HLTCTC
Note: Quick Couplings are molded on. Female Quick Coupling with Plastic latch w ll be threaded on. Compatib e with CPC (Colder), LinkTech and others. * - 2H or 3H w th fil ing bell only
-NO = No vent or drain Outlet fitting
-ETO = Ethylene oxide sterilization
-NI = No vent or drain inlet fitting
Input Fitting Output Fitting Option
Blank = Polypro construction
-GP = Gamma stable polypropylene shell
Prefilter (add before Filter Media in part#)
S3.0.1 Rev 2011.08
005= 0.05 015 = 1.5 020 = 0.20 010 = 0.1 005 = 0.5 010 = 0.1 005= 0.05 005= 0.5 200 = 20 003 = 0.3 005 = 0.05 300 =30 010 = 0.1 025 = 2.5 100 = 1.0 020 = 0.2 010 = 1.0 020 = 0.2 010 = 0.1 400 = 40 006 = 0.6 010 = 0.1 730 = 73020 = 0.2 045 = 4.5 150 = 1.5 045 = 0.45 030 = 3.0 020 = 0.2 600 = 60 010 = 1.0 020 = 0.2045 = 0.45 100 = 10.0 250 = 2.5 100 = 1.0 050 = 5.0 045 = 0.45 10X = 100 030 = 3.0 045 = 0.45065 = 0.65 200 = 20.0 300 = 3.0 100 = 10.0 065 = 0.65 20X = 200 050 = 5.0 065 = 0.65080 = 0.8 500 = 5.0 200 = 20.0 080 = 0.8 100 = 10.0 080 = 0.8100 = 1.0 999 = 10.0 300 = 30.0 100 = 1.0 200 = 20.0 120 = 1.2
300 = 30.0500 = 50.0700 = 70.0
Polyester Screen (TS)
Leave pore size blank for Carbon
Fiber
PP Nanofiber (NP)
Nylon Screen (NS)
PP Media (P) PES (S)Carbon
Fiber (C )Charged
Nylon PolyPro Depth
Polyethylene (E) PTFE (F) Glass
Fiber (G)PP Membrane
(M) Nylon (N)
Page 87
ZenPure
PureFlo SVL Void Filter Capsule Ordering Guide
SVL Void Capsule
PureFlo® SVL Void capsules has 5 capsule sizes to choose from. These units have inter-nal void areas that can be utilized for several purposes. These can range from diatoma-ceous earth collection and filtration to pres-sure surge minimization. The inlet and outlet ports are available with 22 fittings options, eliminating the need for transition connectors. The SVL series capsule has luer lock upstream vent and drain connections, allowing for easy process control. These capsules eliminate the time and expense associated with assembling and cleaning stainless steel housings.
PureFlo Capsule Filters
Filter Media Pore size (Micron)
Internal Filter
Capsule Length
* = No Filter * = No FilterH= 1.5" 1H = 1/8" Hose barbs 1H = 1/8" Hose barbs Shell Material O-Rings
SVL C = Carbon Fiber H = 1.5" S = 2.5" 1NF = 1/8" FNPT 1NF = 1/8" FNPT -OE = O-ring EPDMCN = Charged Nylon S = 2.5" L = 5" 2C = 1/4" Compression 2C = 1/4" Compression -ON = O-ring NitrileDP = Depth PolyPro L = 5" E = 7.5" 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs -E = Polyethylene shell -OV = O-ring VitonE = Polyethylene E = 7.5" K = 10" 2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbsF = PTFE 2L = Large Female Luer Lock fitting 2L = Large Female Luer Lock fittingG = Glass Fiber 2N = 1/4" MNPT 2N = 1/4" MNPT -NY = Nylon ShellM = PolyPro Mem 2NF = 1/4" FNPT 2NF = 1/4" FNPTN = Nylon 2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch SterilizedNP = PP Nanofiber 2QF = 1/4" Female Quick Coupling w/ Metal latch 2QF = 1/4" Female Quick Coupling w/ Metal latchNS = Nylon Screen 2QFP = 1/4" Female Quick Coupling w/ Plastic latch 2QFP = 1/4" Female Quick Coupling w/ Plastic latchP = PolyPro Media 2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latchS = PES 3C = 3/8" Compression 3C = 3/8" Compression Filling BellTS = Polyester Screen 3H = 3/8" Hose Barb 3H = 3/8" Hose Barb -FB = Filling Bell*
3HE = 3/8" Hose Barb Elbow 3HE = 3/8" Hose Barb Elbow -FC = Filling Bell w/Cap*3NF = 3/8" FNPT 3NF = 3/8" FNPT4C = 1/2" Compression 4C = 1/2" Compression Vent & Drain4H = 1/2" Hose Barb 4H = 1/2" Hose Barb -N= No vent or drain 4N = 1/2" MNPT 4N = 1/2" MNPT4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latchMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp
Prefilter (add before Filter Media in
G(pore Size)= Glass Fiber PreFilter
P(pore Size)= PolyPro Media PreFilter
S(pore Size) = PES PreFilter
Void Filter capsule -GP = Gamma stable
polypropylene shell
-NO = No vent or drain Outlet fitting
-ETO = Ethylene oxide sterilization
-NI = No vent or drain inlet fitting
Example - 5", Void Filter capsule with a 60um Nylon screen 1.5" internal filter, with 1.5" Tri Clamp Fittings I/O would be SVLNS600HLTCTC
Blank = O-ring Silicon (Standard)
70mm Diameter Capsule
Blank = Polypro construction
M a e Qu ck Coup ings are mo ded, Fema e Qu ck Coup ing with Plastic latch wi l be threaded on, compatible with CPC (Colder), LinkTech and other compatible couplings.
Pick From Pore Size Table
Blank = No Filter
Input Fitting Output Fitting Option
PureFlo SVL Void Capsule
S3.0.2 Rev 2011.08
005= 0.05 015 = 1.5 020 = 0.20 010 = 0.1 005 = 0.5 010 = 0.1 005= 0.05 005= 0.5 200 = 20 003 = 0.3 005 = 0.05 300 =30 010 = 0.1 025 = 2.5 100 = 1.0 020 = 0.2 010 = 1.0 020 = 0.2 010 = 0.1 400 = 40 006 = 0.6 010 = 0.1 730 = 73020 = 0.2 045 = 4.5 150 = 1.5 045 = 0.45 030 = 3.0 020 = 0.2 600 = 60 010 = 1.0 020 = 0.2045 = 0.45 100 = 10.0 250 = 2.5 100 = 1.0 050 = 5.0 045 = 0.45 10X = 100 030 = 3.0 045 = 0.45065 = 0.65 200 = 20.0 300 = 3.0 100 = 10.0 065 = 0.65 20X = 200 050 = 5.0 065 = 0.65080 = 0.8 500 = 5.0 200 = 20.0 080 = 0.8 100 = 10.0 080 = 0.8100 = 1.0 999 = 10.0 300 = 30.0 100 = 1.0 200 = 20.0 120 = 1.2
300 = 30.0500 = 50.0700 = 70.0
Polyester Screen (TS)
Leave pore size blank for Carbon
Fiber
PP Nanofiber (NP)
Nylon Screen (NS)
PP Media (P) PES (S)Carbon
Fiber (C )Charged
Nylon PolyPro Depth
Polyethylene (E) PTFE (F) Glass
Fiber (G)PP Membrane
(M) Nylon (N)
Page 88
ZenPure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
ZenCap 10-40 inch Void Capsule
PureFlo® ZenCap Void capsules provides a full size container for filter-ing and capturing settling materials. Sizes range from 10-40 inches in length with options to put up to a 30 inch internal filter or no filter. The inlet and outlet ports are available with 8 fittings options that can be mixed and matched, eliminating the need for transition connectors. The ZenCap void capsule has two adjustable, easy to turn up and down stream bleed values with an o-ring seal and hose barb connec-tions allowing for easy process control. These capsules eliminate the time and expense associated with assembling and cleaning stainless steel housings.
They can be built in a T-style or In-line configuration. The filtration shell is an all polypropylene construction that provides excellent chemical compatibility with low extractables. No adhesives, binders, or surfactants are used in the manufacturing process.
PureFlo ZenCap Void Capsule
ZenCap Void Configuration Capsule Length Internal Filter Filter Media Pore size
(Micron) Vents Input Fitting Output Fitting Options
1 = 10" * = No Filter * = No Filter Blank=No Filter A = No vents 3H = 3/8" Hose Barb 3H = 3/8" Hose Barb Shell Material
LV I = In-Line 2 = 20" 5 = 5" CN = Charged Nylon B = 1/2" Sanitary vent 4H = 1/2" Hose Barb 4H = 1/2" Hose Barb Blank = Polypropylene 3 = 30" 1 = 10" DP = Depth PolyPro 4Q = 1/2" Male Quick connect 4Q = 1/2" Male Quick connect -E = Polyethylene 4 = 40" 2 =20" E = Polyethylene 5H = 9/16" Hose Barb 5H = 9/16" Hose Barb
3 = 30" F = PTFE 6H = 3/4" (19mm) Hose Barb 6H = 3/4" (19mm) Hose BarbG = Glass Fiber 8H = 1" (25mm) Hose Barb 8H = 1" (25mm) Hose Barb -NY = Nylon ShellM = PolyPro Membrane 4QP = 1/2" Male Quick connect 4QP = 1/2" Male Quick connectN = Nylon TC = 1-1/2" Tri-Clamp TC = 1-1/2" Tri-ClampNS = Nylon ScreenP = PolyPro MediaS = PESTS = Polyester Screen G = Inlet 1/4" Bleed Valve O-Rings CEP = Cellulose with DE* H = Outlet 1/4" Bleed
-OE = O-Ring EPDM-ON = O-Ring Nitrile
-OV = O-Ring VitonS(pore Size) = PES PreFilter
For -E or -GP opt ons, the standard pleat support w ll be PET for gamma stability
Blank = O-Ring Silicon (Standard)
Example 1 - ZenCAP Void Series Capsule, T-Line, 10" Capsule Nylon Screen 60um, 5" filter, with all vent and drains, 1.5" Tri-Clamp fittings I/O, would be LVT15NS600CTCTC
* Available in late 2011
Prefilter (add before Filter Media in part#)
T = T-Line C = 1/2" Sanitary vent, with upstream and down stream 1/4" Bleed Valve 90mm Diameter
Capsule with Bleed Valve
Note: Option B,C, D &E not for In-Line
Pick From Pore Size Table
D = 1/2" Sanitary vent, with upstream 1/4" Bleed Valve E = 1/2" Sanitary vent, with down stream 1/4" Bleed Valve
G(pore Size)= Glass Fiber PreFilter
P(pore Size)= PolyPro Media PreFilter
-GP = Gamma Stable Polypropylene
F = Inlet and Outlet 1/4" Bleed Valve
ZenCap Void Capsule Ordering Guide
S3.0.3 Rev 2011.08
Charged Nylon (CN)
Depth PP (DP)
Polyethylene (E) PTFE (F) Glass Fiber
(G)PP Membrane
(M)Cellulose w/DE
(CEP) Nylon (N) Nylon Screen (NS) PP Media (P) PES (S) Polyester
Screen (TS)
005 = 0.05 002 = 0.2 020 = 0.20 010 = 0.1 005 = 0.5 010 = 0.1 015 = 0.15 005 = 0 05 100 = 10 003 = 0.3 004 = 0.04 400 = 40010 = 0.10 005 = 0.5 100 = 1.0 020 = 0 2 010 = 1.0 020 = 0 2 040 = 0.40 010 = 0.10 200 = 20 006 = 0.6 010 = 0.1 600 = 60020 = 0.20 010 = 1.0 150 = 1.5 045 = 0.45 030 = 3.0 050 = 0 50 020 = 0 20 400 = 40 010 = 1.0 020 = 0.2 730 = 73045 = 0.45 015 = 1.5 250 = 2.5 100 = 1 0 050 = 5.0 060 = 0 60 045 = 0.45 600 = 60 030 = 3.0 045= 0.45065 = 0.65 025 = 2.5 300 = 3 0 100 = 10.0 085 = 0 85 065 = 0 65 10X = 100 050 = 5.0 065 = 0.65080 = 0.80 045 = 4.5 500 = 5 0 200 = 20.0 150 = 1 50 080 = 0 80 20X = 200 100 = 10.0 080 = 0.8120 = 1.20 100 = 10 999 = 10 0 300 = 30.0 250 = 2 50 120 = 1 20 200 = 20.0 120 =1 2
200 = 20 300 = 3 00 300 = 30.0400 = 4 00 500 = 50.0600 = 6 00 700 = 70.001X = 10 0**
** - Does not have DE
Pore size (Micron)
Page 89
PureFlo SKML Multi-Zone Capsule Filter
ZenPure Ze
nPur
e
Specifications
Materials of Construction: Media: Any ZenPure PureFlo Media Media Supports: Media Dependent
Shell, Cage, Core, and End Caps: Polypropylene, Gamma-stabilized, Polypropylene, Polyethylene, Nylon
Fitting Connections: Hose Barb, NPT, Compression Quick Couplings, and Sanitary. Any inlet/outlet combinations. (Custom adaptors available upon request)
Sterilization: The filters can be sterilized by autoclaving, ETO, and gamma sterilization depending on the con-struction. Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sani-tized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
For more specific information please see individual Datasheets for each filter zone.
Multi-Zone Filter
PureFlo® SKML capsule filters are designed to filter product in a two stage process. Two separate filters are permanently joined together to capture agglomerates, large cell fragments or gels and different size particles in separate stages to avoid premature plugging and in-crease filter lifetime. The filters can be tailored to spe-cific applications that have multiple size inclusions and particles. The first filter acts as a pre-filter, protecting the tighter final filter. All the different PureFlo® Media can be incorporated in this unique design. This double filter allows for ease of use, minimizing space and po-tential connection issues. There are numerous different fitting options available for the inlet and outlet. The fittings can me mixed and matched for greater flexibility to minimize or eliminate needed connection adapters. The inlet and outlet ports are available with 23 fitting options.
These capsules eliminate the time and expense of cleaning multiple stainless steel housings or setting up sequential filter capsules aseptically. The capsule shell is an all polypropylene construction that provides excel-lent chemical compatibility with low extractables. No adhesives, binders, or surfactants are used in the manufacturing process. Each capsule is manufactured under tight process control to give you a uniform prod-uct with every filter.
Applications Fermentor Water Biologics Pharmaceuticals Clarification Bio-Bags Fine Chemicals Food & Beverage Gel Removal High Loading Processes
Zone 1 Zone 2 Size S Capsule Size H Capsule
Page 90
Your Local Distributor:
ZenPure
S4 Rev 2011.08
PureFlo SKML Multi-Zone Capsule Filter
ZenPure
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
PureFlo SKML Capsule Ordering Guide—Pick 1-10 Example of Part number: SKMLLDP010SS020TCTC
PureFlo SKML Capsule, 5” 1st Filter with 1um Depth PP, 2.5” 2nd Filter with 0.2um PES, 1-1/2” Tri-clamp Inlet and Outlet
Cellulose w/DE (CEP) Charged Nylon (CN)
Depth PP (DP)
Polyethylene (E) PTFE (F) Glass Fiber
(G)Polypro
Membrane (M) Nylon (N) Nylon Screen (NS)
PP Nano Fiber (NP) PP Media (P) PES (S) Polyester
Screen (TS)015 = 0.15 005 = 0.05 002 = 0.2 020 = 0.20 010 = 0.1 005 = 0 5 010 = 0.1 010 = 0.10 100 = 10 005 = 0.5 003 = 0.3 005 = 0.05 200 = 20040 = 0.40 010 = 0.10 005 = 0.5 100 = 1.0 020 = 0.2 010 = 1 0 020 = 0.2 020 = 0 20 200 = 20 006 = 0.6 010 = 0.1 400 = 40050 = 0.50 020 = 0.20 010 = 1.0 150 = 1.5 045 = 0.45 030 = 3 0 045 = 0.45 400 = 40 010 = 1.0 020 = 0.2 600 = 60060 = 0.60 045 = 0.45 015 = 1.5 250 = 2.5 100 = 1.0 050 = 5 0 065 = 0 65 600 = 60 030 = 3.0 045 = 0.45 730 = 73085 = 0.85 065 = 0.65 025 = 2.5 300 = 3.0 100 = 10.0 080 = 0 80 10X = 100 050 = 5.0 065 = 0.65
150 = 1.50 080 = 0.80 045 = 4.5 500 = 5.0 200 = 20.0 120 = 1 20 20X = 200 100 = 10.0 080 = 0.8
250 = 2.50 120 = 1.20 100 = 10 999 = 10.0 300 = 30.0 200 = 20.0 120 = 1.2
300 = 3.00 200 = 20 300 = 30.0400 = 4.00 500 = 50.0600 = 6.00 700 = 70.001X = 10.0** 10X = 100.0** - Does not have DE 15X = 150.0
Pore size Table (in Microns)
1 2 3 4 5 6 7
PureFlo Capsule Filters 1st Filter Length 1st Filter Media 1st Filter Pore
size (Micron)2nd Filter
Length 2nd Filter Media 2nd Filter Pore size (Micron)
H = 1.5" CEP = CEP Media H = 1.5" CEP = CEP Media
SKML = Capsule filter S = 2.5" CN = Charged Nylon S = 2.5" CN = Charged Nylon
Multi-Zone L = 5" DP = Depth PP L = 5" DP = Depth PP
Luer Lock Vent/Drain E = 7.5" E = Polyethylene E = 7.5" E = PolyethyleneK = 10" F = PTFE K = 10" F = PTFE
G = Glass Fiber G = Glass FiberM = PolyPro Mem M = PolyPro MemN = Nylon N = NylonNS = Nylon Screen NS = Nylon ScreenNP = PP Nano Fiber NP = PP Nano FiberP = PolyPro Media P = PolyPro MediaS = PES S = PESTS = Polyester Screen TS = Polyester Screen
Pick From Pore Size Table
Pick From Pore Size Table
10
Options
1H = 1/8" Hose barbs 1H = 1/8" Hose barbs Grade1NF = 1/8" FNPT 1NF = 1/8" FNPT Blank = Standard Grade1QF = 1/8" Female Quick Coupling with Metal latch 1QF = 1/8" Female Quick Coupling with Metal latch -B = Biological Reduction Grade2C = 1/4" Compression 2C = 1/4" Compression -PH = Pharmacuetical Grade 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs2HS = 1/4" to 3/8" Hose barbs 2HS = 1/4" to 3/8" Hose barbs Shell Material2LF = Large Female Luer Lock fitting 2LF = Large Female Luer Lock fitting Blank = Polypropylene2N = 1/4" MNPT 2N = 1/4" MNPT -GP = Gamma Stablized PP Shell2NF = 1/4" FNPT 2NF = 1/4" FNPT -NY = Nylon Shell2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch -E = Polyethylene Shell2QF = 1/4" Female Quick Coupling with Metal latch 2QF = 1/4" Female Quick Coupling with Metal latch2QFP = 1/4" Female Quick Coupling with Plastic latch 2QFP = 1/4" Female Quick Coupling with Plastic latch Vent & Drain2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch -N = No vent or Drain fittings2V = 1/4" Walther Male Quick Connect 3C = 3/8" Compression -NI = No vent or Drain Inlet fitting3C = 3/8" Compression 3H = 3/8" Hose Barb -NO = No vent or Drain Outlet fitting3H = 3/8" Hose Barb 3H-FB = Filling Bell3HE = 3/8" Hose Barb Elbow 3H-FC = Filling bell with Sterilization3NF = 3/8" FNPT 3HE = 3/8" Hose Barb Elbow -ETO = Ethylene Oxide Sterilization4C = 1/2" Compression 3NF = 3/8" FNPT4H = 1/2" Hose Barb 4C = 1/2" Compression4N = 1/2" MNPT 4H = 1/2" Hose Barb O-Ring for Quick Coupling4QP = 1/2" Male Quick Coupling for Plastic latch 4N = 1/2" MNPT Blank = O-ring Silicon (Standard)MT = 1/2" Tri clamp 4QP = 1/2" Male Quick Coupling for Plastic latch -OE = O-ring EPDMTC = 1-1/2" Tri clamp MT = 1/2" Tri clamp -ON = O-ring Nitrile
TC = 1-1/2" Tri clamp -OV = O-ring VitonTS = Shower Head
Inlet Fitting
8 9
Outlet Fitting
Page 91
PureFlo SKMV Multi-Zone Capsule Filter
ZenPure Ze
nPur
e
Specifications
Materials of Construction: Media: Any ZenPure PureFlo Media Media Supports: Media Dependent
Shell, Cage, Core, and End Caps: Polypropylene, Gamma-stabilized, Polypropylene, Polyethylene, Nylon
Fitting Connections: Hose Barb, NPT, Compression Quick Couplings, and Sanitary. Vent & Drain: 1/4” Hose Barb Bleed ValvesAny inlet/outlet combinations. (Custom adaptors available upon request)
Sterilization: The filters can be sterilized by autoclaving, ETO, and gamma sterilization depending on the con-struction. Capsules can be autoclaved 25 times at 257°F/125°C for 30 minutes or chemically sani-tized in situ using common sanitizing agents or hot water at 194°F/90°C for a limited time (dependent on time and temperature). Capsules must not be in situ steam-sterilized.
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
For more specific information please see individual datasheets for each filter zone.
Multi-Zone Filter
PureFlo® SKMV capsule filters are designed to filter product in a two stage process. Two separate filters are permanently joined together to capture agglomerates, large cell fragments, gels and different size particles in separate stages to avoid premature plugging and in-crease filter lifetime. The filters can be tailored to spe-cific applications that have multiple size inclusions and particles. The first filter acts as a pre-filter, protecting the tighter final filter. All the different PureFlo® Media can be incorporated in this unique design. This double filter allows for ease of use, minimizing space and po-tential connection issues. There are numerous different fitting options available for the inlet and outlet. The fittings can me mixed and matched for greater flexibility to minimize or eliminate needed connection adapters. The inlet and outlet ports are available with 20 fitting options. The vent and drain are convenient multi-turn bleed valves to allow for sampling or evacuation of air.
These capsules eliminate the time and expense of cleaning multiple stainless steel housings or setting up sequential filter capsules aseptically. The capsule shell is an all polypropylene construction that provides excel-lent chemical compatibility with low extractables. No adhesives, binders, or surfactants are used in the manufacturing process. Each capsule is manufactured under tight process control to give you a uniform prod-uct with every filter.
Applications Fermentor Water Biologics Pharmaceuticals Clarification Bio-Bags Fine Chemicals Food & Beverage Gel Removal High Loading Processes
Zone 2 Zone 1 Size H Capsule Size L Capsule
FLOW
Page 92
Your Local Distributor:
ZenPure
S5 Rev 2011.08
PureFlo SKMV Multi-Zone Capsule Filter
ZenPure
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
PureFlo SKMV Capsule Ordering Guide—Pick 1-10 Example of Part number: SKMVLDP010SS020TCTC
PureFlo SKMV Capsule, 5” 1st Filter with 1um Depth PP, 2.5” 2nd Filter with 0.2um PES, 1-1/2” Tri-clamp Inlet and Outlet
Cellulose w/DE (CEP) Charged Nylon (CN)
Depth PP (DP)
Polyethylene (E) PTFE (F) Glass Fiber
(G)Polypro
Membrane (M) Nylon (N) Nylon Screen (NS)
PP Nano Fiber (NP) PP Media (P) PES (S) Polyester
Screen (TS)015 = 0.15 005 = 0.05 002 = 0.2 020 = 0.20 010 = 0.1 005 = 0 5 010 = 0.1 010 = 0.10 100 = 10 005 = 0.5 003 = 0.3 005 = 0.05 200 = 20040 = 0.40 010 = 0.10 005 = 0.5 100 = 1.0 020 = 0.2 010 = 1 0 020 = 0.2 020 = 0 20 200 = 20 006 = 0.6 010 = 0.1 400 = 40050 = 0.50 020 = 0.20 010 = 1.0 150 = 1.5 045 = 0.45 030 = 3 0 045 = 0.45 400 = 40 010 = 1.0 020 = 0.2 600 = 60060 = 0.60 045 = 0.45 015 = 1.5 250 = 2.5 100 = 1.0 050 = 5 0 065 = 0 65 600 = 60 030 = 3.0 045 = 0.45 730 = 73085 = 0.85 065 = 0.65 025 = 2.5 300 = 3.0 100 = 10.0 080 = 0 80 10X = 100 050 = 5.0 065 = 0.65
150 = 1.50 080 = 0.80 045 = 4.5 500 = 5.0 200 = 20.0 120 = 1 20 20X = 200 100 = 10.0 080 = 0.8
250 = 2.50 120 = 1.20 100 = 10 999 = 10.0 300 = 30.0 200 = 20.0 120 = 1.2
300 = 3.00 200 = 20 300 = 30.0400 = 4.00 500 = 50.0600 = 6.00 700 = 70.001X = 10.0** 10X = 100.0** - Does not have DE 15X = 150.0
Pore size Table (in Microns)
1 2 3 4 5 6 7PureFlo Capsule
Filters1st Filter
Length 1st Filter Media 1st Filter Pore size (Micron)
2nd Filter Length 2nd Filter Media 2nd Filter Pore
size (Micron)H = 1.5" CEP = CEP Media H = 1.5" CEP = CEP Media
SKMV = Capsule filter S = 2.5" CN = Charged Nylon S = 2.5" CN = Charged Nylon
Multi-Zone L = 5" DP = Depth PP L = 5" DP = Depth PP
Bleed Valve Vents E = 7.5" E = Polyethylene E = 7.5" E = PolyethyleneK = 10" F = PTFE K = 10" F = PTFE
G = Glass Fiber G = Glass FiberM = PolyPro Mem M = PolyPro MemN = Nylon N = NylonNS = Nylon Screen NS = Nylon ScreenNP = PP Nano Fiber NP = PP Nano FiberP = PolyPro Media P = PolyPro MediaS = PES S = PESTS = Polyester Screen TS = Polyester Screen
Pick From Pore Size Table
Pick From Pore Size Table
8 9 10
Inlet Fitting Outlet Fitting Options
1H = 1/8" Hose barbs 1H = 1/8" Hose barbs Grade1NF = 1/8" FNPT 1NF = 1/8" FNPT Blank = Standard Grade1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latch -B = Biological Reduction Grade1QF = 1/8" Female Quick Coupling with Metal latch 2C = 1/4" Compression -PH = Pharmacuetical Grade 2C = 1/4" Compression 2H = 1/4" to 1/2" Hose barbs2H = 1/4" to 1/2" Hose barbs 2N = 1/4" MNPT Shell Material2N = 1/4" MNPT 2NF = 1/4" FNPT Blank = Polypropylene2NF = 1/4" FNPT 2Q = 1/4" Male Quick Coupling for Metal latch -GP = Gamma Stablized PP Shell2Q = 1/4" Male Quick Coupling for Metal latch 2QF = 1/4" Female Quick Coupling with Metal latch -NY = Nylon Shell2QF = 1/4" Female Quick Coupling with Metal latch 2QFP = 1/4" Female Quick Coupling with Plastic latch -E = Polyethylene Shell2QFP = 1/4" Female Quick Coupling with Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch2QP = 1/4" Male Quick Coupling for Plastic latch 3H = 3/8" Hose Barb Vent & Drain2V = 1/4" Walther Male Quick Connect 3H-FB = Filling Bell -N = No vent or Drain fittings3H = 3/8" Hose Barb 3H-FC = Filling bell with Cap -NI = No vent or Drain inlet fitting3NF = 3/8" FNPT 3NF = 3/8" FNPT -NO = No vent or Drain Outlet fitting4H = 1/2" Hose Barb 4H = 1/2" Hose Barb 4N = 1/2" MNPT 4N = 1/2" MNPT Sterilization4QP = 1/2" Male Quick Coupling for Plastic latch 4QP = 1/2" Male Quick Coupling for Plastic latch -ETO = Ethylene Oxide SterilizationMT = 1/2" Tri clamp MT = 1/2" Tri clampTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp O-Ring for Quick Coupling
TS = Shower Head Blank = O-ring Silicon (Standard)-OE = O-ring EPDM-ON = O-ring Nitrile-OV = O-ring Viton
Page 93
PureFlo® EDF Capsule
ZenPureZ
enP
ure
Specifications
Materials of Construction: Media: Polypropylene Media, PTFE, Nylon Screen, PES, Polyester Screen Shell, Cage, Core, End Caps: Polypropylene , PE, Nylon Sealing: Thermally bonded
Fitting Connections: Male Quick Connect, Hose Barb
Nominal Dimensions: Lengths: Long - 190mm (7.48”) , Short - 127mm (5”) Dimensions : 21mm (0.82”) x 29mm (1.14”) Effective Filtration Area: 4 in2 (26cm2)
Available Ratings: 0.1um - 200.0um (Dependent on Media)
Operating Conditions: Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Maximum Forward Differential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Differential Pressure: 2.1 bar (30 psi) at 68°F/20°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Operating Temperature: 176°F (80°C)
Autoclave Cycles: The filters can be sterilized by autoclaving for 10 cycles at 257°F/125°C for 30 minutes, except for PE membrane. Capsules must not be in situ steam- sterilized.
Endoscope Disinfectant Filter
PureFlo® Endoscope Disinfectant Filter is designed for quick and easy connection to endoscope wash machines’ disinfectant and air lines.
The polypropylene construction provides excellent compatibility with a wide-range of disinfectants. No adhesives, binders, or surfactants are used in the manufacturing process. All units are thermally-sealed and flushed, dried and packaged to provide a quality product straight out of the box.
Applications
Endoscopes Chemicals
Lab scale testing Water Scale up Processing Clarification
Replacement for #MF-01-0011 is ZenPure #EDFNS200L2Q2QP
Replacement for #MF01-0028 is ZenPure #EDFF020S2QP2QP
Page 94
ZenPurePureFlo® EDF Capsule
ZenPureYour Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company. Copyright 2003-2012 ZenPure or an affiliated company. All rights reserved.
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
S6 Rev 2011.08
PureFlo Capsule Filters
Filter Media Pore size (Micron) Length Options
EDF F = PTFE S = Short 1Q = 1/8" Male Quick Coupling for Metal latch 1Q = 1/8" Male Quick Coupling for Metal latch GradePureFlo NS = Nylon Screen L = Long 1QP = 1/8" Male Quick Coupling for Plastic latch 1QP = 1/8" Male Quick Coupling for Plastic latch Blank = Standard Grade
P = PP Media 2H = 1/4" to 1/2" Hose barbs 2H = 1/4" to 1/2" Hose barbs Shell MaterialS = PES 2Q = 1/4" Male Quick Coupling for Metal latch 2Q = 1/4" Male Quick Coupling for Metal latch Blank = PolypropyleneTS = Polyester Screen 2QP = 1/4" Male Quick Coupling for Plastic latch 2QP = 1/4" Male Quick Coupling for Plastic latch -GP = Gamma Stablized PP Shell
-NY = Nylon Shell-E = Polyethylene Shell
Sterilization-ETO = Ethylene Oxide Sterilization
O-Ring for Quick CouplingBlank = O-ring Silicon (Standard)-OE = O-ring EPDM-ON = O-ring Nitrile-OV = O-ring Viton
Input Fitting Output Fitting
Pick From Pore Size
Table
Example - Block Capsule, Nylon Screen, 20 micron,Long version, 1/4" Male Quick Connect for Metal Latch Inlet, 1/4" Male Quick Connect for Plastic latch would be EDFNS200L2Q2QPQuick Couplings are molded, compatible with CPC (Colder), LinkTech and others.
Endoscope Disinfectant
Filter Capsule
PureFlo Endo Disinfectant Filter Ordering Guide
(1.14”) (0
82”)
(7.48”)
(3.5”)
(3 5”)
(5”)
Dimensions in mm (inch)
2QP Fittings
PTFE (F) Nylon Screen (NS) PP Media (P) PES (S) Polyester Screen (TS)
010 = 0.1 100 = 10 003 = 0.3 004 = 0.04 200 = 20020 = 0.2 200 = 20 006 = 0.6 010 = 0.1 400 = 40045 = 0.45 400 = 40 010 = 1.0 020 = 0.2 600 = 60100 = 1.0 600 = 60 030 = 3.0 045= 0.45 730 = 73300 = 3.0 10X = 100 050 = 5.0 065 = 0.65500 = 5.0 20X = 200 100 = 10.0 080 = 0.8999 = 10.0 200 = 20.0 120 =1.2
300 = 30.0500 = 50.0700 = 70.0
Pore size (Micron)
Page 95
PureFlo® Junior Cartridges Compact Filtration
ZenPure Ze
nPur
e
Multi-Use Junior Cartridge
PureFlo® Junior cartridges are ready-to-use filters that offer high flows, increased throughputs, high strength, all with the convenience in a small package. Designed for small applications in pharmaceutical, biotechnology, food and beverage, medical, chemical, and DI water.
PureFlo® Junior cartridge are available with a wide range of hydrophilic and hydrophobic filter medias and pore sizes for liquid, gas, and venting applications. Process engineers can choose from 11 filtration medias to meet their needs.
They can be built with several configurations, and used without a housing. The cage, core, and fitting are all-polypropylene construction that provides excellent chemical compatibility with low extractables. The sup-ports can also be constructed in nylon, polyethylene, or gamma stabilized PP for additional compatibility. The filter is manufactured by thermal bonding. No adhesives, binders, or surfactants are used in the manufacturing process.
Applications Clarification Water & Wine
Hard Particle Food & Beverages Vacuum Pump Pharmaceuticals Chemicals Biologics Inks, Dyes Tank Vent Aerator Vent
Specification Materials of Construction: Media: Charged Nylon, Depth PP, Polyethylene, PTFE, Glass Fiber, PP Membrane, Nylon, Nylon Screen, PP media, PES, and Polyester Screen Media Supports: Polypropylene, Polyester, Nylon, or HDPE Shell, Cage, Core, End Caps: Polypropylene, Nylon, or HDPE Sealing: Thermally bonded
Fitting Connections: 11 Fittings - See Ordering Guide for availability. (Custom adaptors available upon request)
Nominal Dimensions: Lengths: 1.5” (35.5mm) without fittings, 2.5” (65mm) without fittings Diameter: 1.14” (29mm)
Effective Filtration Area: 260cm2 for single layer membrane, 230cm2 for double layer membrane 200cm2 for Depth and Screen Media
Available Ratings: 0.04um - 200.0um (Dependent on Media)
Operating Conditions: Maximum Operating pressure: 5 bar (73psi) at 25°C Maximum Operating Temperature: 80° C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastics.
Page 96
ZenPure PureFlo® Junior Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B15.95 Rev 2011.07.2
PureFlo® Junior Filter Cartridge Ordering Guide
Charged Nylon (CN)
Depth PP (DP)
Polyethylene (E) PTFE (F) Glass
Fiber (G)
Polypro Membrane
(M)Nylon (N)
Nylon Screen
(NS)
Polypro Media (P)
Philic PTFE (HF)
PES (S)
005= 0.05 002 = 0.2 020 = 0.20 010 = 0.1 004 = 0.45 010 = 0.1 005= 0.05 100 = 10 003 = 0.3 Request 005 = 0.05010 = 0.10 005 = 0.5 100 = 1.0 020 = 0.2 005 = 0.5 020 = 0.2 010 = 0.10 200 = 20 006 = 0.6 010 = 0.1020 = 0.20 010 = 1.0 150 = 1.5 045 = 0.45 010 = 1.0 020 = 0.20 400 = 40 010 = 1.0 020 = 0.2045 = 0.45 015 = 1.5 250 = 2.5 100 = 1.0 030 = 3.0 045 = 0.45 600 = 60 030 = 3.0 045 = 0.45065 = 0.65 025 = 2.5 300 = 3.0 050 = 5.0 065 = 0.65 10X = 100 050 = 5.0 065 = 0.65080 = 0.80 045 = 4.5 500 = 5.0 100 = 10.0 080 = 0.80 20X = 200 100 = 10.0 080 = 0.8120 = 1.20 100 = 10.0 999 = 10.0 200 = 20.0 120 = 1.20 200 = 20.0 120 = 1.2
200 = 20.0 300 = 30.0 005 = 0.5 300 = 30.0500 = 50.0700 = 70.0
Polypro Nano Fiber
(NP)
Pore size (Micron)
PureFlo Mini Cartridge Filters
PreFilter Filter Media
PreFilter Pore Size (Micron) Final Filter Media Pore Size
(Micron) Length End Modification
CN = Charged Nylon H = 1.5" 0H = 1/16-3/32" Hose Barb Shell Material O-Rings
DP = Depth PolyPro S = 2.5" 1C = 1/8" Compression
CN = Charged Nylon E = Polyethylene 1H = 1/8-3/16" Hose Barb
E = Polyethylene F = PTFE 1N = 1/8" NPTM -OE = O-ring EPDM
F = PTFE G = Glass Fiber -ON = O-ring Nitrile
G = Glass Fiber M = PolyPro Mem -OV = O-ring Viton
M = PolyPro Mem N = Nylon 2H = 3/16-1/4" Hose Barb Sterilized
N = Nylon NP = PP Nano Fiber 2UF = 1/4-28 thread Female
NP = PP Nano Fiber NS = Nylon Screen 3H = 1/4-3/8" Hose Barb
P = PolyPro Media P = PolyPro Media LF = Luer Lock Female
HF = Hydrophilic PTFE HF = Hydrophilic PTFE LM = Luer Lock Male
S = PES S = PES MT = 1/2" Tri Clamp
Blank = Polypro construction
-E = Polyethylene construction
-GP = Gamma stable polypropylene construction
Blank = O-ring Silicon (Standard)
Options
Example - MJ Series, PTFE, 1.0um, no prefilter, 1/4" Hose Barb I/O is MJF100H2H
Quick Couplings are molded, compatible with CPC (Colder), LinkTech and others.
Blank = No Pre filter
1Q = 1/8" Male Quick Coupling
-ETO = Ethylene oxide sterilization
-NY = Nylon construction
Blank = No Pre filter
Pick From Pore Size Table
MJ = Cartridge Filter, PP parts standard Grade
Pick From Pore Size
Table
Blank = Same media as Prefilter
Length S
Length H
Page 97
PureFlo® Polypropylene Membrane Filter Cartridges
ZenPure Ze
nPur
e
PureFlo® polypropylene membrane filter cartridges are highly retentive and naturally hydrophobic filters. Polypropylene membrane is a reliable choice for the purification of aggressive chemicals, compressed gases, and vent applications. The all-polypropylene construction is an excellent economic alternative to more expensive fluoropolymer-based cartridges
No adhesives, binders, or surfactants are used in the manufacturing process. Furthermore, the all-polypropylene construction provides excellent thermal and chemical compatibility with low and high pH chemicals.
PureFlo polypropylene membrane filter cartridges are absolute rated to ensure consistent filter performance each and every time out of the package. All filter cartridges are 100% integrity tested to ensure filter performance.
Materials of Construction Media: Polypropylene Membrane (hydrophobic) Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicone, EPDM, Fluoro-elastomer,
Buna N, TES, TEV Dimensions (nominal)
Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm)
Diameter: 2.75 in. (7 cm) Effective Filtration Area
0.65 m2 (7 ft2) per 10" cartridge element Operating Conditions Maximum Forward Differential Pressure:
5.0 bar (72.5 psid) at 20° C 2.0 bar (29 psid) at 80° C
Maximum Reverse Differential Pressure: 3.0 bar (43.5 psid) at 20° C 1.0 bar (14.5 psid) at 80° C
Maximum Operating Temperature: 80° C
Applications Acids Ink Bases Parts Cleaning Solvents Pharmaceuticals Fine Chemicals Biologics Plating Solutions Vent
Features Benefits ■ Polypropylene Pleated Membrane Media
(Absolute Rated)
■ Consistent and reproducible particulate removal ■ High flow rates and low pressure drops ■ Superior filter lifetime and process throughputs
■ 100% Polypropylene Construction ■ Provides excellent compatibility with a wide range of chemicals such as acids, bases, and solvents
■ No media migration into the process fluid
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during manufacturing resulting in superior downstream cleanliness
■ All cartridges are rinsed with high-purity water to reduce extractables and downtime
Page 98
ZenPure PureFlo® Polypropylene Membrane Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B16 Rev 2011.08
PureFlo Polypropylene Membrane Filter Cartridge Ordering Guide
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 5 10 15
0 8 16 24 32 40 48 56
PureFlo PolyPro Membrane Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.10.2
Polypropylene Membrane Filter
Cartridges
Removal Rating (micron)
Connections LengthO-Ring / Gasket
MaterialsPackage Quantity
Inserts
10 = 0.10 0 = 222 O-Ring Flat 1 = 10" E = EPDM 1 = 1 per pack Blank = StandardMCP = Poly propy lene 20 = 0.20 5 = 222 O-Ring Spear 2 = 20" N = Buna N
Membrane 6 = 226 O-Ring Flat 3 = 30" S = Silicone 7 = 226 O-Ring Spear 4 = 40" V = Fluro-Elastomers F = DOE Flat Gasket 5 = 5" T = TEV* S = SOE Flat Gasket 9 = 9.75" U = TES* Z = SOE Internal 213 O-ring Flat **
- 5 = Stainless Steel Insert
* - not av ailable in Code Z ** - only av ailable in 5", 10" and 20"Ex ample - PP Membrane filter, 10", 0.2 micron cartridge, w ith 2-222 Silicone o-ring, Flat end cap, and no insert w ould be MCP2001S1
Regulatory Compliance Manufactured from materials that conform to the require-ments of 21CFR Part 177 of the U.S. Code of Federal Regula-tions and USP Class VI Biological Test for Plastics.
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 5 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compati-ble with filter components.
Page 99
PureFlo® Polypro Filter Cartridges
ZenPure Ze
nPur
e
PureFlo® polypropylene filter cartridges are highly retentive, graded porosity polypropylene media filters that have been specially designed for clarification and pre-filtration applications. The graded porosity design removes particles in sequence by size – larger particles by the more open outer layers and smaller particles by the tighter inner layers. The outer layers act as a pre-filter while the inner layers provide the absolute rating at the specified pore size. This efficiently spreads the contaminants throughout the media matrix resulting in superior contaminant holding capacity, lifetime, and pressure drop as compared to other media cartridges.
No adhesives, binders, or surfactants are used in the manufacturing process. The non-woven media does not allow migration into the process fluid, thereby reducing the potential for extractables and downtime. Furthermore, the all-polypropylene construction provides excellent thermal and chemical compatibility with low and high pH chemicals.
PureFlo polypropylene filter cartridges ensure consistent filter performance each and every time out of the package.
Materials of Construction Media: Non-Woven Polypropylene Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicone, EPDM, Viton, Buna N, TES, TEV Dimensions (nominal)
Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm)
Diameter: 2.75 in. (7 cm) Effective Filtration Area
0.6 m2 (6.4 ft2) per 10" cartridge element Operating Conditions Maximum Forward Differential Pressure:
5.0 bar (72.5 psid) at 20° C 2.0 bar (29 psid) at 80° C
Maximum Reverse Differential Pressure: 3.0 bar (43.5 psid) at 20 °C 1.0 bar (14.5 psid) at 80° C
Maximum Operating Temperature: 80° C
Applications Acids Ink Jets Bases Electronics Solvents Pharmaceuticals Fine Chemicals Biologics Plating Solutions Dyes Parts Cleaning Lacquers
Features Benefits ■ Graded Porosity Pleated Polypro Media
■ Media matrix removes particles in sequence by size – larger particles by the more open outer layers and smaller particles by the tighter inner layers
■ High flow rates and low pressure drops ■ Superior filter lifetime and process throughputs
■ 100% Polypropylene Construction ■ Provides excellent compatibility with a wide-range of chemicals such as acids, bases and solvents
■ No media migration into the process fluid
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during manufacturing resulting in superior downstream cleanliness
■ All cartridges are rinsed with high-purity water to reduce extractables and downtime
■ High Performance Filtration ■ Consistent and reproducible particulate removal
Page 100
ZenPure PureFlo® Polypro Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated com-pany Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B17 Rev 2011.08
PureFlo Polypro Filter Cartridge Ordering Guide
0
5
10
15
0
0.2
0.4
0.6
0.8
1
0 5 10 15 20
0 10 20 30 40 50 60 70
PureFlo PolyPro Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
3.07.0, 10
0.3
0.6
1.0
5.0
30, 50, 70
PureFlo Polypro Media
Pore Size (micron)
Connections
Length
Gasket / O-Ring Materials
Package Quantity
Inserts
NCP
03 = 0.3 06 = 0.6 10 = 1.0 30 = 3.0 50 = 5.0 70 = 7.0 1X = 10 2X = 20 3X = 30 5X = 50 7X = 70 10X = 100 15X = 150
0 = 222 O-Ring Flat 5 = 222 O-Ring Spear 6 = 226 O-Ring Flat 7 = 226 O-Ring Spear F = DOE Flat Gasket S = SOE Flat Gasket Z = SOE Internal 213
O-Ring Flat **
1 = 10” 2 = 20” 3 = 30” 4 = 40” 5 = 5”9 = 9.75”
E = EPDM N = Buna N S = Silicone V = Viton T = TEV * U = TES *
1 = 1 per pack 6 = 6 per pack
Blank = Standard -5 = Stainless Steel Insert
Example – 10”, 1.0 micron, with 2-222 EPDM O-Rings/Spear Cap and no insert would be NCP1051E1 * - not available in Code Z **- only available in 5", 10", and 20"
Regulatory Compliance Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regula-tions and USP Class VI Biological Test for Plastics.
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 5 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components.
Page 101
PureFlo® Depth Pleated Polypro Filter Cartridges (Thick pleated depth media)
ZenPure Ze
nPur
e
High Bio-Burden Efficient Filtration
PureFlo® pleated depth cartridge filters are designed for large scale filtration and clarification applications in the pharmaceutical, biotechnol-ogy, food and beverage, medical, chemical, wa-ter, and power generation industries worldwide. This family of products is particularly suitable for the fluids that contain high bio-burdens or sus-pended solids.
Highly retentive graded porosity design removes particles in sequence by size – larger particles by the more open outer layers and smaller particles by the tighter inner layers. The outer layers act as a pre-filter while the inner layers provide the absolute rating at the specified pore size. This efficiently spreads the contaminants throughout the media matrix resulting in superior contami-nant holding capacity, lifetime, and pressure drop as compared to other media cartridges.
Applications Clarification Ink Bio-Burden Beverages Yeast Removal Pharmaceuticals Fine Chemicals Biologics Plating Solutions Wine Beer Water
Specifications
Materials of Construction: Media: Non-Woven Polypropylene Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicone, EPDM, Fluoro-Elastomer, Buna N, TES, TEV
Fitting Connections: See ordering guide for the availability Custom adaptors available upon request
Nominal Dimensions: Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76cm), 40 in. (102cm)
Diameter: 2.75 in. (7 cm)
Available Ratings: 0.2um, 0.5um, 1.0um, 1.5um, 2.5um, 4.5um, 10um, and 20um
Operating Conditions: Maximum Forward Differential Pressure: 5.0 bar (72.5 psid) at 20° C, 2.0 bar (29 psid) at 80° C
Maximum Reverse Differential Pressure: 3.0 bar (43.5 psid) at 20° C, 1.0 bar (14.5 psid) at 80 °C
Maximum Operating Temperature: 80° C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Fed- eral Regulations and USP Class VI Biological Test for Plastic.
Page 102
ZenPure PureFlo® Depth Pleated Polypro Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B17.5 Rev 2011.08
0
0.5
1
1.5
2
0
0.02
0.04
0.06
0.08
0.1
0.12
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PureFlo Depth Pleated PolyPro Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid10" Cartridge
20
1.5
2.5
4.510
1.0
0.5
PureFlo Depth Pleated Polypro Filter Cartridge Ordering Guide
PureFlo Polypropylene Filter
CartridgesRemoval Rating End Modifications Length
O-Ring / Gasket Materials
Package Qty Inserts
02 = 0.2 micron 0 = 222 O-Ring Flat 1 - 10" E = EPDM 1 = 1pc/ pack Blank = Standard05 = 0.5 micron 5 = 222 O-Ring Spear 2 - 20" N = Buna N10 = 1.0 micron 6 = 226 O-Ring Flat 3 - 30" S = Silicone15 = 1.5 micron 7 = 226 O-Ring Spear 4 - 40" V = Viton25 = 2.5 micron F = DOE Flat Gasket 5 = 5" T = TEV*45 = 4.5 micron S = SOE Flat Gasket 9 = 9.75" U = TES*1X = 10 micron2X = 20 micron
* - not av ailable in Code Z ** - only av ailable in 5", 10" and 20"
Z = SOE Internal 213 O-ring Flat **
NDP = Depth Pleated Polypropylene
6 = 6pc/ pack (for10" and 20" only )
Example - Depth Pleated PP Media filter, 10", 2.5 micron cartridge, w ith 2-222 Silicone o-ring, Flat end cap, and no insert w ould be NDP2501S1
-5 = Stainless Steel Insert
Specifications (cont.)
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 5 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components.
Page 103
PureFlo® Industrial PP Cartridges
ZenPure Ze
nPur
e
PureFlo® Industrial polypropylene filter cartridges are graded porosity polypropylene media filters that have been designed for general clarification and pre-filtration applications. The graded porosity design re-moves particles in sequence by size – larger particles by the more open outer layers and smaller particles by the tighter inner layers. The outer layers act as a pre-filter while the inner layers provide the smaller particle retention. The media spreads the contami-nants throughout the matrix resulting in a high con-taminant holding capacity, long lifetime, and low pressure drop.
No adhesives, binders, or surfactants are used in the manufacturing process and the non-woven media does not allow for migration into the process fluid, thereby reducing the potential for extractables and downtime. The all-polypropylene construction pro-vides thermal and chemical compatibility with low and high pH chemicals.
Pleated polypropylene filter cartridges are manufac-tured to ensure consistent filter performance each and every time out of the package.
Applications Acids Ink Jets Bases Parts Cleaning Solvents Lacquers Fine Chemicals Plating Solutions Industrial Dyes
Specification Materials of Construction: Media: Non-Woven Polypropylene Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicone, EPDM, Viton, Buna N, TES, TEV Sealing: Thermally bonded
Dimensions (nominal) Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm) 40 in. (102 cm) up to 70” Diameter: 2.75 in. (7 cm)
Effective Filtration Area: 0.5 m2 (5.4 ft2) per 10" cartridge element
Available Ratings: 0.6um - 150.0um
Operating Conditions: Maximum Forward Differential Pressure: 5.0 bar (73 psid) at 20° C 2.0 bar (29 psid) at 80° C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 20° C 1.0 bar (14.5 psid) at 80° C Maximum Operating Temperature: 80° C
Page 104
ZenPure PureFlo® Industrial PP Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B17.7 Rev 2011.08
PureFlo Industrial Polypro Filter Cartridge Ordering Guide
PureFlo Industrial PP Filter Cartridges
Removal Rating End Modifications Length O-Ring / Gasket Materials Inserts
06 = 0.60 micron 0 = 222 O-Ring Flat 1 - 10" E = EPDM Blank = StandardNIP = Polypropylene 10 = 1 micron 5 = 222 O-Ring Spear 2 - 20" N = Buna N
30 = 3 micron 6 = 226 O-Ring Flat 3 - 30" S = Silicone50 = 5 micron 7 = 226 O-Ring Spear 4 - 40" V = Viton70 = 7 micron F = DOE Flat Gasket 5 = 5" T = TEV*1X = 10 micron S = SOE Flat Gasket 9 = 9.75" U = TES*2X = 20 micron Y = DOE Internal 213 O-ring**3X = 30 micron Z = SOE Internal 213 O-ring Flat **4X = 40 micron5X = 50 micron7X = 70 micron 10X = 100 micron 15X = 150 micron
Example - Industrial PP Media filter, 10", 3 micron cartridge, w ith 2-222 Silicone o-ring, Flat end cap, and no insert w ould be NIP3001S* - not av ailable in Code Z ** - only av ailable in 5", 10" and 20"
-5 = Stainless Steel Insert
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 5 10 15
0 8 16 24 32 40 48 56
PureFlo Industrial PolyPro Cartridge
GPM
BarPSID
LPMD
iffer
entia
l Pr
essu
re
Flow Rate @22°C, 1cP Fluid
3.07.0, 10
1.0
5.0
30, 50, 70
0.6
Page 105
PureFlo® PTFE Filter Cartridges
ZenPureZ
enP
ure
PureFlo® PTFE filter cartridges are highly retentive hydro-phobic PTFE membrane filters that have been specially designed for critical applications. The PTFE membrane in an all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane cartridges. No adhesives, binders, or surfac-tants are used in the manufacturing process and all cartridges are rinsed with high-purity water to reduce extractables and downtime.
The naturally hydrophobic PTFE membrane is ideally suited for aggressive chemicals such as acids, bases, and solvents. In addition, the hydrophobic membrane provides superior flow and pressure drop characteristics per unit area for gas filtration and tank venting applications. All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package. PureFlo PTFE filter car-tridges are well-suited for critical applications where superior flow and particle removal efficiency at 0.1 and 0.2 micron is required.
Materials of ConstructionMembrane: Hydrophobic PTFE Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicone, EPDM, Viton, Buna N, TES, and TEV
Dimensions (nominal)Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm) Diameter: 2.75 in. (7 cm)
Effective Filtration Area0.65 m2 (7.0 ft2) per 10" cartridge element
Operating ConditionsMaximum Forward Differential Pressure: 6.0 bar (87 psid) at 20 °C 2.0 bar (29 psid) at 80 °C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 20 °C 1.0 bar (14.5 psid) at 80 °C Maximum Operating Temperature: 80° C
ApplicationsAcids Ink Jets
Bases Electronics
Solvents Pharmaceuticals
Fine Chemicals Biologics
Plating Solutions Dyes
Parts Cleaning Lacquers
Features Benefits � Hydrophobic PTFE Membrane
(Absolute Rated)� Consistent and reproducible particulate removal � High flow rates and low pressure drops � Superior filter lifetime and process throughputs
� Wide Chemical & Thermal Compatibility � Provides excellent compatibility with a wide range of chemicals such as acids, bases, and solvents
� No media migration into the process fluid
� Low Filter Extractables � No adhesives, binders, or surfactants are used during the manufacturing process resulting in superior downstream cleanliness
� All cartridges are rinsed with high-purity water to reduce downtime
Page 106
ZenPurePureFlo® PTFE Filter Cartridges
ZenPureYour Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company. Copyright 2003-2012 ZenPure or an affiliated company. All rights reserved.
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B18 Rev 2011.08
PureFlo PTFE Filter Cartridge Ordering Guide
PureFlo PTFE
Pore Size (micron) Connections Length
Gasket / O-Ring Materials
Package Quantity Inserts
MCF
PTFE with PP Construction
10 = 0.1020 = 0.20 45 = 0.45 1X = 1.0 3X = 3.0 5X = 5.0 9X = 10
0 = 222 O-Ring Flat5 = 222 O-Ring Spear6 = 226 O-Ring Flat7 = 226 O-Ring SpearF = DOE Flat GasketS = SOE Flat GasketZ = SOE Internal 213
O-ring Flat **
1 = 10"2 = 20"3 = 30"4 = 40"5 = 5"9 = 9.75"
E = EPDMN = Buna NS = SiliconeV = VitonT = TEV *U = TES *
1 = 1 per pack
Blank = Standard-5 = Stainless Steel Insert
Example – 20", 0.20 micron, with 2-222 EPDM O-Rings/Flat Cap and no insert would be MCF2002E1
* - not available in Code Z **- only available in 5", 10", and 20"
SPECIFICATIONSRegulatory Compliance
Manufactured from materials that con-form to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regula-tions and USP Class VI Biological Test for Plastics
Bacterial RetentionComplete retention of > 107organisms/cm2 of Brevundimonas diminuta in ac-cordance with the current HIMA chal-lenge methodology (ASTM F838-83). Validation Guide available upon request.
Sterilization & AutoclavingThe filters can be sterilized by autoclav-ing for up to 50 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 50 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or com-mon chemicals that are compatible with filter components.
Bio-SafetyFilter effluent is non-pyrogenic per USP bacterial endotoxin (<0.25 EU/ml)
0
5
10
15
0
0.2
0.4
0.6
0.8
1
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PureFlo PTFE Cartridge
GPM
BarPSID
LPM
Dif
fere
nti
al
Pre
ss
ure
Flow Rate @22°C, 1cP Fluid
0.1
0.2
Gas
Liquid
0
0.5
1
1.5
2
2.5
3
0
0.05
0.1
0.15
0.2
0 500 1000 1500 2000 2500 3000
0 20 40 60 80 100
PTFE Cartridge Gas Flow Rate - 10"
slpm
BarPSID
scfm
Dif
fere
nti
al
Pre
ss
ure
Flow Rate @22°C, Air
0.2um = 0.003um Gas filter
30 PSIG nlet
0.1um
Page 107
PureFlo Hi Temp PTFE Filters (PTFE Membrane w/Hi Temp Nylon construction)
ZenPure Ze
nPur
e
High Compatibility level
PureFlo® Hi Temp PTFE filter cartridges are highly retentive hydrophobic PTFE membrane filters with Nylon components that have been specially designed for critical liquid and gas sterilization applications as possible alter-native to all Teflon® filters. The PTFE membrane with Ny-lon construction provides excellent chemical compatibility and superior flow per unit area for steam-in-place and hot gas applications. No adhesives, binders, or surfactants are used in the manufacturing process and all cartridges are rinsed with high-purity water to reduce extractables and downtime.
The naturally hydrophobic PTFE membrane with Nylon construction is ideally suited for aggressive chemicals and gas filtration. In addition, the hydrophobic mem-brane provides superior flow and pressure drop charac-teristics per unit area for higher temperature venting ap-plications. All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package. PureFlo Hi Temp PTFE filter cartridges are well-suited for critical applications where superior micro-organism removal efficiency is required in a high tem-perature or aggressive environments.
Specification
Materials of Construction: Media: PTFE membrane (hydrophobic) Media Supports: Nylon O-ring insert: Stainless steel 316L option Cage, Core, End Caps: Nylon O-Rings: Silicone, EPDM, Fluoroelastomer, Buna N
Effective Filtration Area: 7.0ft2 (0.65m2) per 10" cartridge element Nominal Dimensions: Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102cm) Diameter: 2.75 in. (70mm)
Available Ratings: 0.1um, 0.2um (0.01um in Gas), 0.45um, 0.65um, 1.0um, 3.0um, 5.0um, & 10.0um
Operating Conditions: Maximum Forward Differential Pressure: 6.0 bar (87 psid) at 20 °C 3.0 bar (44 psid) at 80 °C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 20 °C 1.0 bar (14.5 psid) at 80 °C Maximum Operating Temperature: 95° C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Applications High temp Chemicals Hot Water
Solvent filtration Hot Gas filtration
Tank vent Gas Sterilization
Fine Chemicals Fermentation
Page 108
ZenPure PureFlo Hi Temp PTFE Filters
ZenP
ure ZenPure
Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B18.5 Rev 2011.08
Specifications (cont.)
Sterilization & Autoclaving: The filters can be sterilized by autoclaving for up to 100 cycles at 275°F/135°C. The filters can also be sterilized by steam-in-place procedure up to 100 cycles at 287.6°F/142°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components.
Retention: For 0.2um (0.003um in Gas) Liquid: Complete retention of > 107organisms/cm2 of Brevundimonas diminuta in accordance with the
current HIMA challenge methodology (ASTM F838-83). Gas: Validated by aerosol bacterial (Staphylococcus aureus and Viral (�X174 Bacteriophage) challenge
testing.
Integrity tested: All cartridges are 100% integrity tested—Validation Guide available upon request
PureFlo Hi Temp PTFE Filter Cartridge with Nylon Construction Ordering Guide
PureFlo Filter Cartridges Removal Rating End Modifications LengthO-Ring / Gasket
MaterialsPackage Qty Options
10 - 0.10 micron 0 = 222 O-Ring Flat 1 - 10" E = EPDM 1 = 1pc/ pack Blank = StandardMNF = Hy drophobic 20 - 0.20 micron 5 = 222 O-Ring Spear 2 - 20" N = Buna N
PTFE 45 - 0.45 micron 6 = 226 O-Ring Flat 3 - 30" S = SiliconeW/ Ny lon Construction 1X - 1.0 micron 7 = 226 O-Ring Spear 4 - 40" V = Viton
3X - 3.0 micron F = DOE Flat Gasket 5 = 5" T = TEV*5X - 5.0 micron S = SOE Flat Gasket 9 = 9.75" U = TES*9X - 10 micron Y = DOE Internal 213 O-ring**
Z = SOE Internal 213 O-ring Flat **
-5 = Stainless Steel Insert
Example - PTFE w / Ny lon Construction filter, 10", 0.2 micron cartridge, w ith 2-222 Silicone o-ring, Flat end cap, and no insert w ould be MNF2001S1* - not av ailable in Code Z ** - only av ailable in 5", 10" and 20"
0
5
10
15
0
0.2
0.4
0.6
0.8
1
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PureFlo PTFE Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.1
0.2
0
0.5
1
1.5
2
2.5
3
0
0.05
0.1
0.15
0.2
0 500 1000 1500 2000 2500 3000
0 20 40 60 80 100
PTFE Cartridge Gas Flow Rate - 10"
slpm
BarPSID
scfm
Diff
eren
tial
Pres
sure
Flow Rate @22°C, Air
0.2um
30 PSIG Inlet
0.1um
Gas Liquid
Page 109
PureFlo Hi Temp PTFE Filters (PTFE Membrane w/Hi Temp PP and SS core)
ZenPure Ze
nPur
e
High Compatibility level
PureFlo® Hi Temp PTFE filter cartridges are highly retentive hydrophobic PTFE membrane filters with High Temperature polypropylene components that have been specially designed for critical liquid and gas sterilization applications. The PTFE membrane with High Temperature construction provides excellent chemical compatibility and superior flow per unit area for steam-in-place and hot gas applications. No adhesives, binders, or surfactants are used in the manufacturing process and all cartridges are rinsed with high-purity water to reduce extractables and downtime.
The naturally hydrophobic PTFE membrane is ideally suited for aggressive chemicals and gas filtration. In addition, the hydrophobic membrane provides superior flow and pressure drop characteristics per unit area for higher temperature venting applications. All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package. PureFlo Hi Temp PTFE filter cartridges are well-suited for critical applications where superior flow and particle or microorganism removal efficiency is required in a high temperature environment.
Specification
Materials of Construction: Media: PTFE membrane (hydrophobic) Media Supports: Polypropylene media Core, O-ring insert: Stainless steel 316L Cage, End Caps: High Temperature tolerant polypropylene O-Rings: Silicone, EPDM, Fluoroelastomer, Buna N,
Effective Filtration Area: 7.0ft2 (0.65m2) per 10" cartridge element Nominal Dimensions: Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102cm) Diameter: 2.75 in. (70mm)
Available Ratings: 0.1um, 0.2um (0.01um in Gas), 0.45um, 0.65um, 1.0um, 3.0um, 5.0um, & 10.0um
Operating Conditions: Maximum Forward Differential Pressure: 6.0 bar (87 psid) at 20 °C 4.0 bar (58 psid) at 80 °C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 20 °C 1.0 bar (14.5 psid) at 80 °C Maximum Operating Temperature: 80° C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Applications High Temp Chemicals Hot Water
Solvent filtration Hot Gas filtration
Tank vent Gas Sterilization
Fine Chemicals Fermentation
Page 110
ZenPure PureFlo Hi Temp PTFE Filters
ZenP
ure ZenPure
Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B18.6 Rev 2011.07
PureFlo Hi Temp PTFE w/SS Core Filter Cartridge Ordering Guide
PureFlo PTFE Filter Cartridges
Removal Rating End Modifications Length O-Ring / Gasket Materials Package Qty
10 - 0.10 micron 0 = 222 O-Ring Flat 1 - 10" E = EPDM 1 = 1pc/ packMSF = Hy drophobic 20 - 0.20 micron 5 = 222 O-Ring Spear 2 - 20" N = Buna N
PTFE 45 - 0.45 micron 6 = 226 O-Ring Flat 3 - 30" S = Siliconew / High Temp PP construction 1X - 1.0 micron 7 = 226 O-Ring Spear 4 - 40" V = Viton
Stainless steel core 3X - 3.0 micron F = DOE Flat Gasket 5 = 5" T = TEV*and SS O-ring insert 5X - 5.0 micron S = SOE Flat Gasket 9 = 9.75" U = TES*
9X - 10 micron
Example - PureFlo Hi Temp PTFE Cartridge, 10", 1.0 micron cartridge, w ith 2-226 Silicone o-ring, Fin end cap, and no insert w ould be MSF1X71S1Code 6 &7 come w ith an imbedded SS o-ring insert * - not av ailable in Code Z ** - only av ailable in 5", 10" and 20"
Z = SOE Internal 213 O-ring Flat **
Code 6 &7 come with an
embedded SS O-ring
Specifications (cont.)
Sterilization & Autoclaving: The filters can be sterilized by autoclaving for up to 150 cycles at 275°F/135°C. The filters can also be sterilized by steam-in-place procedure up to 150 cycles at 287.6°F/142°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components.
Retention: For 0.2um (0.003um in Gas) Liquid: Complete retention of > 107organisms/cm2 of Brevundimonas diminuta in accordance with the
current HIMA challenge methodology (ASTM F838-83). Gas: Validated by aerosol bacterial (Staphylococcus aureus and Viral (�X174 Bacteriophage) challenge
testing.
Integrity tested: All cartridges are 100% integrity tested—Validation Guide available upon request
0
5
10
15
0
0.2
0.4
0.6
0.8
1
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PureFlo PTFE Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.1
0.2
0
0.5
1
1.5
2
2.5
3
0
0.05
0.1
0.15
0.2
0 500 1000 1500 2000 2500 3000
0 20 40 60 80 100
PTFE Cartridge Gas Flow Rate - 10"
slpm
BarPSID
scfm
Diff
eren
tial
Pres
sure
Flow Rate @22°C, Air
0.2um
30 PSIG Inlet
0.1um
Gas Liquid
Page 111
PureFlo Hi Temp PTFE Filters (PTFE Membrane w/Hi Temp PP construction)
ZenPure Ze
nPur
e
High Compatibility level
PureFlo® Hi Temp PTFE filter cartridges are highly retentive hydrophobic PTFE membrane filters with High Temperature polypropylene components that have been specially designed for critical liquid and gas sterilization applications. The PTFE membrane with High Temperature construction provides excellent chemical compatibility and superior flow per unit area for steam-in-place and hot gas applications. No adhesives, binders, or surfactants are used in the manufacturing process and all cartridges are rinsed with high-purity water to reduce extractables and downtime.
The naturally hydrophobic PTFE membrane is ideally suited for aggressive chemicals and gas filtration. In addition, the hydrophobic membrane provides superior flow and pressure drop characteristics per unit area for higher temperature venting applications. All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package. PureFlo Hi Temp PTFE filter cartridges are well-suited for critical applications where superior flow and particle or microorganism removal efficiency is required in a high temperature environment.
Specification
Materials of Construction: Media: PTFE membrane (hydrophobic) Media Supports: Polypropylene media O-ring insert: Stainless steel 316L Cage, Core, End Caps: High Temperature tolerant polypropylene O-Rings: Silicone, EPDM, Fluoroelastomer, Buna N,
Effective Filtration Area: 7.0ft2 (0.65m2) per 10" cartridge element Nominal Dimensions: Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102cm) Diameter: 2.75 in. (70mm)
Available Ratings: 0.1um, 0.2um (0.01um in Gas), 0.45um, 0.65um, 1.0um, 3.0um, 5.0um, & 10.0um
Operating Conditions: Maximum Forward Differential Pressure: 6.0 bar (87 psid) at 20 °C 3.0 bar (44 psid) at 80 °C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 20 °C 1.0 bar (14.5 psid) at 80 °C Maximum Operating Temperature: 80° C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Applications High temp Chemicals Hot Water
Solvent filtration Hot Gas filtration
Tank vent Gas Sterilization
Fine Chemicals Fermentation
Page 112
ZenPure PureFlo Hi Temp PTFE Filters
ZenP
ure ZenPure
Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B18.7 Rev 2011.08
Specifications (cont.)
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 100 cycles at 275°F/135°C. The filters can also be sterilized by steam-in-place procedure up to 100 cycles at 287.6°F/142°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components.
Retention: For 0.2um (0.003um in Gas) Liquid: Complete retention of > 107organisms/cm2 of Brevundimonas diminuta in accordance with the
current HIMA challenge methodology (ASTM F838-83). Gas: Validated by aerosol bacterial (Staphylococcus aureus and Viral (�X174 Bacteriophage) challenge
testing.
Integrity tested: All cartridges are 100% integrity tested—Validation Guide available upon request
PureFlo Hi Temp PTFE Filter Cartridge Ordering Guide
PureFlo PTFE Filter Cartridges
Removal Rating End Modifications Length O-Ring / Gasket Materials Package Qty Inserts
10 - 0.10 micron 0 = 222 O-Ring Flat 1 - 10" E = EPDM 1 = 1pc/ pack Blank = StandardMBF = Hy drophobic 20 - 0.20 micron 5 = 222 O-Ring Spear 2 - 20" N = Buna N
PTFE w / High Temp PP 45 - 0.45 micron 6 = 226 O-Ring Flat 3 - 30" S = SiliconeConstruction 1X - 1.0 micron 7 = 226 O-Ring Spear 4 - 40" V = Viton
3X - 3.0 micron F = DOE Flat Gasket 5 = 5" T = TEV*5X - 5.0 micron S = SOE Flat Gasket 9 = 9.75" U = TES*9X - 10 micron
Code 6 &7 come w ith an imbedded SS o-ring insert * - not av ailable in Code Z ** - only av ailable in 5", 10" and 20"
-5 = Stainless Steel Insert
Z = SOE Internal 213 O-ring Flat **
Example - PureFlo PTFE Cartridge, 10", 1.0 micron cartridge, w ith 2-222 Silicone o-ring, Flat end cap, and no insert w ould be MBF1X01S1
0
5
10
15
0
0.2
0.4
0.6
0.8
1
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PureFlo PTFE Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.1
0.2
0
0.5
1
1.5
2
2.5
3
0
0.05
0.1
0.15
0.2
0 500 1000 1500 2000 2500 3000
0 20 40 60 80 100
PTFE Cartridge Gas Flow Rate - 10"
slpm
BarPSID
scfm
Diff
eren
tial
Pres
sure
Flow Rate @22°C, Air
0.2um
30 PSIG Inlet
0.1um
Gas Liquid
Page 113
PureFlo® Polyethylene Cartridges PE membrane on HDPE construction
ZenPure Ze
nPur
e
PureFlo® Polyethylene cartridges are highly reten-tive and have naturally hydrophobic filters. Polyeth-ylene membrane is a reliable choice for the purifi-cation of aggressive chemicals, compressed gases, and vent applications. The PE membrance on HDPE construction is an excellent economic alternative to more expensive fluoropolymer-based cartridges
No adhesives, binders, or surfactants are used in the manufacturing process. PureFlo polyethylene filter cartridges are absolute rated to ensure consis-tent filter performance each and every time out of the package. All filter cartridges are 100% integrity tested and flushed to ensure filter performance.
Applications Clarification Solvents
Hard Particle Food & Beverages Vacuum Pump Pharmaceuticals Chemicals Biologics Inks, Dyes Tank Vent Aerator Vent
Specification Materials of Construction: Media: Polyethylene Media Supports: Polyethylene Shell, Cage, Core, End Caps: HDPE Sealing: Thermally bonded
Effective Filtration Area: 0.65m2 (7ft2) per 10” cartridge element
Nominal Dimensions: Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102cm) Diameter: 2.75 in. (70mm)
Available Ratings: 0.2um, 1um, 1.5um, & 2.5um
Operating Conditions: Maximum Forward Differential Pressure: 4.1 bar (60 psid) at 20 °C 2.0 bar (29 psid) at 80 °C Maximum Reverse Differential Pressure: 2.0 bar (29 psid) at 20 °C 1.0 bar (14.5 psid) at 80 °C Maximum Operating Temperature: 158°F (70°C)
Regulatory Compliance: The filters are constructed with High Density Polyethylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastics.
Page 114
ZenPure PureFlo® Polyethylene Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B18.9 Rev 2011.07
PureFlo® Polyethylene Cartridge Ordering Guide
PureFlo PE Filter Cartridges Removal Rating End Modifications Length O-Ring / Gasket Materials Package Qty
20 - 0.20 micron 0 = 222 O-Ring Flat 1 - 10" E = EPDM 1 = 1pc/ packMCE = Hy drophobic 1X - 1.0 micron 5 = 222 O-Ring Spear 2 - 20" N = Buna N
PE 2X - 1.5 micron 6 = 226 O-Ring Flat 3 - 30" S = SiliconeW/ PE Construction 3X - 2.5 micron 7 = 226 O-Ring Spear 4 - 40" V = Viton
F = DOE Flat Gasket 5 = 5" T = TEV*S = SOE Flat Gasket 9 = 9.75" U = TES*Z = SOE Internal 213
O-ring Flat **Example - PureFlo PE Cartridge, 10", 1.0 micron cartridge, w ith 2-222 Silicone o-ring, Flat end cap, and no insert w ould be MCE1X01S1
* - not av ailable in Code Z ** - only av ailable in 5", 10" and 20"
Page 115
PureFlo® Nylon Filter Cartridges
ZenPure Ze
nPur
e
PureFlo® nylon filter cartridges are highly-retentive, naturally hydrophilic nylon membrane filters that have been specially designed for critical applications. The nylon membrane in an all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane cartridges. No adhesives, binders, or surfac-tants are used in the manufacturing process and all cartridges are rinsed with high-purity water to reduce extractables and downtime.
The naturally hydrophilic nylon membrane does not require pre-wetting with IPA and flushing with DI water, thereby eliminating a potential source of contamination and hazardous waste. In addition, unlike hydrophobic filters such as PTFE, the hydrophilic membrane of nylon reduces the potential for bubble formation by not de-wetting in out-gassing fluids. All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package. PureFlo nylon filter cartridges are well-suited for critical applications where superior flow and particle removal efficiency at 0.1, 0.2, 0.45, 0.65, 0.85 and 1.2 micron is required.
Features Benefits ■ Naturally Hydrophilic Nylon Membrane
(Absolute Rated) ■ IPA pre-wetting not required – thereby eliminating a
potential source of contamination and disposal waste ■ Reduces downtime and improves throughput ■ Economic alternative to PTFE and PVDF filters ■ No dewetting in outgassing fluids unlike hydrophobic filters
such as polypropylene ■ Built To Exacting Specifications ■ Provides a consistent level of filtration
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during manufacturing resulting in superior downstream cleanliness
■ Cartridges are rinsed with high-purity water
Materials of Construction Membrane: Naturally Hydrophilic Nylon Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicone, EPDM, Viton, Buna N, TES, TEV
Dimensions (nominal) Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm) Diameter: 2.75 in. (7 cm)
Effective Filtration Area 0.65 m2 (7.0 ft2) per 10" cartridge element
Operating Conditions Maximum Forward Differential Pressure: 5 bar (87 psid) at 20 °C 2 bar (29 psid) at 80 °C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 20 °C 1 bar (14.5 psid) at 80 °C Maximum Operating Temperature: 80° C
Applications Solvents Ink Jets
Fine Chemicals Parts Cleaning
Plating Solutions Pharmaceuticals
Process Water Biologics
Beverages Dyes
Page 116
ZenPure PureFlo® Nylon Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B19 Rev 2011.08
PureFlo Nylon Filter Cartridge Ordering Guide
0
5
10
15
0
0.2
0.4
0.6
0.8
1
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PureFlo Nylon Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cp Fluid
0.1
0.2
0.450.65
1.0
PureFlo Nylon Filters Removal Rating End Modifications Length O-Ring / Gasket Materials Package Qty Inserts
Cartridge 10 - 0.10 micron 0 = 222 O-Ring Flat 1 - 10" E = EPDM 1= 1pc/ pack Blank = StandardMCN = Ny lon 20 - 0.20 micron 5 = 222 O-Ring Spear 2 - 20" N = Buna N - 5 = SS Insert
50 - 0.45 micron 6 = 226 O-Ring Flat 3 - 30" S = Silicone65 - 0.65 micron 7 = 226 O-Ring Spear 4 - 40" V = Viton85 - 0.85 micron F = DOE Flat Gasket 5 = 5" T = TEV*1X - 1.2 micron S = SOE Flat Gasket 9 = 9.75" U = TES*
Z = SOE Internal 213 O-ring Flat **Example - PureFlo Ny lon filter, 10", 0.2 micron cartridge, w ith 2-222 Silicone o-ring, Flat end cap, and no insert w ould be MCN2001S1
* - not av ailable in Code Z ** - only av ailable in 5", 10" and 20"
Regulatory Compliance Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 3 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pres-sure. The filters can also sanitized by hot water or common chemicals that are compatible with filter compo-nents.
Page 117
PureFlo® Nylon Plus Filter Cartridges
ZenPure Ze
nPur
e
PureFlo® Nylon Plus filter cartridges are highly retentive, naturally hydrophilic membrane filters that have been spe-cially designed for high temperature applications. The nylon membrane with polyester supports in a polypropylene con-struction provides excellent chemical compatibility and su-perior flow per unit area as compared to other membrane cartridges. No adhesives, binders, or surfactants are used in the manufacturing process and all cartridges are rinsed with high-purity water to reduce extractables and downtime.
The naturally hydrophilic nylon membrane does not require pre-wetting with IPA and flushing with DI water, thereby eliminating a potential source of contamination and hazard-ous waste. In addition, unlike hydrophobic filters such as PTFE the hydrophilic nylon membrane reduces the potential for bubble formation by not de-wetting in out gassing fluids. All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package. PureFlo Nylon Plus filter cartridges are well-suited for criti-cal applications where superior flow and particle removal efficiency at 0.1, 0.2, 0.45, 0.65, and 1.0 micron is required.
Materials of Construction Membrane: Nylon 6, 6 Membrane Supports: Polyester Cage, Core: Polypropylene End Caps: Polypropylene O-Rings: Silicone, EPDM, Fluoroelastomer, Buna N, TES, and TEV
Dimensions (nominal) Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm) Diameter: 2.75 in. (7 cm)
Effective Filtration Area 0.6 m2 (6.5 ft2) per 10" cartridge element
Operating Conditions Maximum Forward Differential Pressure: 5 bar (87 psid) at 20 °C 2 bar (29 psid) at 80 °C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 20 °C 1 bar (14.5 psid) at 80 °C Maximum Operating Temperature: 80° C
Applications High Temp Acids Bases Chemical Distribution
Solvents Pharmaceuticals
Fine Chemicals Biologics
Plating Solutions Dyes Parts Cleaning Magnetic Coatings
Features Benefits ■ Nylon Plus Construction
(Absolute Rated) ■ Higher temperature range ■ Maximum compatibility range ■ Superior filter lifetime and process throughputs
■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide range chemicals such as acids, bases, and solvents
■ No media migration into the process fluid
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during the manufacturing process resulting in superior downstream cleanliness
■ All cartridges are rinsed with high-purity water to reduce downtime
Page 118
ZenPure PureFlo® Nylon Plus Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2009 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B19.3 Rev 2011.08
PureFlo Nylon Plus Filter Cartridge Ordering Guide
SPECIFICATIONS Regulatory Compliance
Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics
Sterilization & Autoclaving
The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 3 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components.
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 2 4 6 8 10
0 5 10 15 20 25 30 35PureFlo NYLON Plus Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cp Fluid
0.1
0.2
0.45 0.651.0
Nylon Plus
Cartridge
Pore Size (micron)
Connections
Length
Gasket / O-Ring Materials
Package Quantity
Inserts
MNN
05 = 0.05 10 = 0.10 20 = 0.20 50 = 0.45 65 = 0.65 1X = 1.0
0 = 222 O-Ring Flat 5 = 222 O-Ring Spear 6 = 226 O-Ring Flat 7 = 226 O-Ring Spear F = DOE Flat Gasket S = SOE Flat Gasket Z = SOE Internal 213
O-ring Flat **
1 = 10" 2 = 20" 3 = 30" 4 = 40" 5 = 5"
E = EPDM N = Buna N S = Silicone V = Fluoro-Elastomer T = TEV * U = TES *
1 = 1 per pack
Blank =Standard - 5 =S t a i n l e s s Steel Insert
Example – 20", 0.20 micron, with 2-222 EPDM O-Rings/Flat Cap and no insert would be MNN2002E1 * - not available in Code Z **- only available in 5", 10", and 20"
Page 119
PureFlo® All-Nylon Filter Cartridge
ZenPure Ze
nPur
e
Materials of Construction Membrane: Nylon 6,6 Membrane Supports: Nylon Cage, Core: Nylon End Caps: Nylon O-Rings: Silicone, EPDM, Fluoroelastomer, Buna N, TES, and TEV
Dimensions (nominal) Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm) Diameter: 2.75 in. (7 cm)
Effective Filtration Area 0.6 m2 (6.5 ft2) per 10" cartridge element
Operating Conditions Maximum Forward Differential Pressure: 6.0 bar (87 psid) at 20 °C 3.0 bar (44 psid) at 80 °C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 20 °C 1.0 bar (14.5 psid) at 80 °C Maximum Operating Temperature: 95° C
PureFlo® All-Nylon filter cartridges are highly retentive, naturally hydrophilic membrane filters that have been spe-cially designed for high temperature applications. The nylon membrane in an all-nylon construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane cartridges. No adhesives, binders, or surfactants are used in the manufacturing process and all cartridges are rinsed with high-purity water to reduce extractables and downtime.
The naturally hydrophilic nylon membrane does not require pre-wetting with IPA and flushing with DI water, thereby eliminating a potential source of contamination and hazard-ous waste. In addition, the hydrophilic membrane reduces the potential for bubble formation by not dewetting in out-gassing fluids unlike hydrophobic filters such as polypropyl-ene. All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package. PureFlo All Nylon filter cartridges are well-suited for criti-cal applications where superior flow and particle removal efficiency at 0.1, 0.2, 0.45, 0.65, and 1.0 micron is required.
Features Benefits ■ All Nylon Construction
(Absolute Rated) ■ Higher temperature range ■ Maximum compatibility range ■ Superior filter lifetime and process throughputs
■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide-range chemicals such as acids, bases, and solvents
■ No media migration into the process fluid ■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during the manufac-
turing process resulting in superior downstream cleanliness ■ All cartridges are rinsed with high purity water to reduce down-
time
Applications Solvents Ink Jets Fine Chemicals Industrial
Plating Solutions Parts Cleaning
Process Water Lacquers
Industrial Dyes
Page 120
ZenPure PureFlo® All-Nylon Filter Cartridge
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B19.5 Rev 2011.08
PureFlo All-Nylon Filter Cartridge Ordering Guide
All NYLON Cartridge
Pore Size (micron)
Connections
Length
Gasket / O-Ring Materials
Package Quantity
Inserts
MSN
All Nylon con-struction
05 = 0.05 10 = 0.10 20 = 0.20 50 = 0.45 65 = 0.65 80 = 0.80 1X = 1.2
0 = 222 O-Ring Flat 5 = 222 O-Ring Spear 6 = 226 O-Ring Flat 7 = 226 O-Ring Spear F = DOE Flat Gasket S = SOE Flat Gasket Z = SOE Internal 213
O-Ring Flat **
1 = 10" 2 = 20" 3 = 30" 4 = 40" 5 = 5"
E = EPDM N = Buna N S = Silicone V = Fluoro-Elastomer T = TEV * U = TES *
1 = 1 per pack
Blank =Standard - 5 =S t a i n l e s s Steel Insert
Example – 20", 0.20 micron, with 2-222 EPDM O-Rings/Flat Cap and no insert would be MSN2002E1 * - not available in Code Z **- only available in 5", 10", and 20"
SPECIFICATIONS Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 3 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components. Regulatory Compliance
Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastic.
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 2 4 6 8 10
0 5 10 15 20 25 30 35PureFlo All NYLON Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cp Fluid
0.1
0.2
0.45 0.651.0
Page 121
PureFlo Charged Nylon Filters (Charged Nylon Membrane with PP Construction)
ZenPure Ze
nPur
e
High Contaminant Removal
PureFlo® Charged Nylon cartridge filters are designed to remove particle smaller that its rated pore size with the power of electrical attraction (adsorption/adhesion). Many particles in water and other liquids have a negative charge that can be captured by attraction to a positively charged filter. This combined with particle size exclusion (sieving) process and impaction/ interception particle capture mechanism make this charged nylon filter extremely efficient. The PureFlo® Charged Nylon cartridges are naturally hydrophilic nylon membrane filters with a Polyester support layer for added wetability of the membrane. The nylon membrane in an all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane cartridges. No adhesives, binders, or surfactants are used in the manufacturing process and all cartridges are rinsed with high-purity water to reduce extractables and downtime. All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package.
Specification
Materials of Construction: Media: Charged Nylon 6,6 membrane (hydrophilic) Media Supports: Polyester Cage, Core, End Caps: Polypropylene O-Rings: Silicone, EPDM, Fluoroelastomer, Buna N
Effective Filtration Area: EPN Version - 6.5Ft2 (0.6m2) per 10" cartridge element MPN Version - 9Ft2 (0.84m2) per 10" cartridge element
Nominal Dimensions: Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102cm) Diameter: 2.75 in. (70mm)
Available Ratings: 0.05um, 0.1um, 0.2um, 0.45um, 0.65um, 1.0um,
Operating Conditions: Maximum Forward Differential Pressure: 5.0 bar (73 psid) at 20 °C 2.0 bar (29 psid) at 80 °C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 20 °C 1.0 bar (14.5 psid) at 80 °C Maximum Operating Temperature: 80° C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Applications DI Water UltraPure Water Critical Parts Cleaning
Endotoxin Minimization
Fine Chemicals Plating Solutions
Page 122
ZenPure PureFlo Charged Nylon Filters
ZenP
ure ZenPure
Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
B19.6 Rev 2011.08
Specifications (cont.)
Sterilization & Autoclaving: The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 3 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter com-ponents.
PureFlo Charged Nylon Filter Cartridge Ordering Guide
0
5
10
15
0
0.2
0.4
0.6
0.8
1
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PureFlo Charged Nylon Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cp Fluid
0.1
0.2
0.450.65
1.0
PureFlo Nylon Filters Removal Rating End Modifications LengthO-Ring / Gasket
MaterialsPackage Qty Inserts
05 - 0.05 micron 0 = 222 O-Ring Flat 1 - 10" E = EPDM 1= 1pc/ pack Blank = StandardEPN = Charged Ny lon 10 - 0.10 micron 5 = 222 O-Ring Spear 2 - 20" N = Buna N -5 = SS Insert
(6.5Ft2) 20 - 0.20 micron 6 = 226 O-Ring Flat 3 - 30" S = Silicone50 - 0.45 micron 7 = 226 O-Ring Spear 4 - 40" V = Viton
MPN = Charged Ny lon 65 - 0.65 micron F = DOE Flat Gasket 5 = 5" T = TEV* (9.0 Ft2) 1X - 1.0 micron S = SOE Flat Gasket 9 = 9.75" U = TES*
Z = SOE Internal 213 O-ring Flat **
Example - Charged Ny lon w ith 9ft2, 10", 0.2 micron cartridge, w ith 2-226 Silicone o-ring, Spear, and no insert w ould be MPN2071S1* - not av ailable in Code Z ** - only av ailable in 5", 10" and 20"
Page 123
PureFlo® PES Filter Cartridges
ZenPure Ze
nPur
e
PureFlo® PES filter cartridges are highly retentive hydrophilic PES membrane filters that have been specially designed for critical applications. The PES membrane in an all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane cartridges. No adhesives, binders, or sur-factants are used in the manufacturing process and all car-tridges are rinsed with high-purity water to reduce ex-tractables and downtime.
The hydrophilic PES membrane does not require pre-wetting with IPA and flushing with DI water, thereby eliminating a potential source of contamination and hazardous waste. In addition, unlike hydrophobic filters such as PTFE, the hydro-philic PES membrane reduces the potential for bubble forma-tion by not de-wetting in outgassing fluids. All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package. PureFlo PES filter cartridges are well-suited for critical applications where superior flow and particle removal efficiency at 0.05, 0.1, 0.2, 0.45, 0.65, 0.80 and 1.2 micron is required.
Materials of Construction Membrane: Hydrophilic Polyethersulfone Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene Gasket / O-Rings: EPDM, Buna N, Silicone, Viton, TES, and TEV
Dimensions (nominal) Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm) Diameter: 2.75 in. (7 cm)
Effective Filtration Area 0.65 m2 (7 ft2) per 10" cartridge element Operating Conditions
Maximum Forward Differential Pressure: 5.0 bar (73 psid) at 20°C 2.0 bar (29 psid) at 80°C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 20°C 1.0 bar (14.5 psid) at 80°C Maximum Operating Temperature: 80° C
Applications Acids Ink Jets Bases Clarification Solvents Pharmaceuticals Fine Chemicals Biologics Plating Solutions Dyes Process Water Lacquers Beverages Parts Cleaning
Features Benefits ■ Hydrophilic PES Membrane
(Absolute Rated)
■ IPA pre-wetting not required – thereby eliminating a potential source of contamination and disposal waste
■ Reduces downtime and improves throughput ■ Economic alternative to PTFE filters ■ No de-wetting in out-gassing fluids, unlike hydrophobic filters
■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide-range of chemicals
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during manufac-turing resulting in superior downstream cleanliness
■ All cartridges are rinsed with high-purity water
Page 124
ZenPure PureFlo® PES Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
C20 Rev 2011.08
PureFlo PES Filter Cartridge Ordering Guide
PureFlo PES Membrane
Pore Size (micron)
Connections Length Gasket / O-Ring
Materials
Package Quantity
Inserts
MCS PES membrane
with PP construction
05 = 0.05 10 = 0.10 20 = 0.20 50 = 0.45 65 = 0.65 80 = 0.80 1X = 1.20
0 = 222 O-Ring Flat 5 = 222 O-Ring Spear 6 = 226 O-Ring Flat 7 = 226 O-Ring Spear F = DOE Flat Gasket S = SOE Flat Gasket Z = SOE Internal 213
O-Ring Flat **
1 = 10"2 = 20" 3 = 30" 4 = 40" 5 = 5"
E = EPDM N = Buna N S = Silicone V = Fluoro-Elastomer T = TEV * U = TES *
1 = 1 per pack
Blank = Standard -5 = Stainless Steel Insert
Example – 10", 0.65 micron cartridge, with 2-222 EPDM O-Rings/Flat Cap and no insert would be MCS6501E1
* - not available in Code Z **- only available in 5", 10", and 20"
0
1
2
3
4
5
6
7
8
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PureFlo PES Cartridge
0
0.1
0.2
0.3
0.4
0.5
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.1
0.20.45
0.651.2
0.05
0.8
Regulatory Compliance Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastic
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 10 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components.
Page 125
PureFlo® Pharmaceutical Grade Cartridge
ZenPure Ze
nPur
e
The PureFlo® pharmaceutical grade cartridges are designed to produce product sterility. The all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane cartridges. PureFlo® pharmaceutical grades cartridges have been designed for final filtration in biopharmaceutical applications. The hydrophilic PES membrane does not require pre-wetting agents, thereby eliminating a potential source of contamina-tion. The PES membrane has low protein-binding characteris-tics to maximize yields
No adhesives, binders, or surfactants are used in the manufacturing process. All cartridges are rinsed with pyrogen-free water to reduce extractables and downtime. All filter cartridges are 100% integrity tested to ensure filter performance and quality. PureFlo pharmaceutical grade filter cartridges are well-suited for critical applications where superior flow and bacterial retention is required.
SPECIFICATIONS Bacterial Retention
Complete retention of > 107organisms/cm2 of Brevun-dimonas diminuta in accordance with the current HIMA challenge methodology (ASTM F838-83). Validation Guide available upon request.
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cy-cles at 257°F/125°C for the MCS Series and up to 50 cycles at 257°F/125°C for the MPS Series Filters. The filters can also be sterilized by steam-in-place procedure up to 10 cy-cles at 275°F/135°C for the MCS Series and up to 30 cycles at 275°F/135°C for the MPS Series. Both for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are com-patible with filter components.
Water Bubble Point Specification 0.1um : 23psi,0.16 MPA (IPA) 0.2um : 47psi,0.32 MPA
Bio-Safety Filter effluent is non-pyrogenic per USP bacterial endotoxin
(<0.25 EU/ml)
Features Benefits ■ Hydrophilic PES Membrane
(Absolute Rated)
■ Inherently hydrophilic ■ High flow rate reduces processing time ■ Low protein-binding membrane maximizing yields ■ Biologically inert membrane ■ Bacterial retentive to produce sterile solutions
■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide-range of chemicals
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during manufacturing resulting in superior downstream cleanliness
■ All cartridges are rinsed with pyrogen-free water
Applications
Culture media Fermentation Broths
Serums LVP ( Large Volume Parenterals)
Vaccines Pharmaceuticals
Fine Chemicals Biologics Antibiotics Beverages Water Scale Up Processes
Regulatory Compliance Manufactured from materials that conform to the require-ments of 21CFR Part 177 of the U.S. Code of Federal Regu-lations and USP Class VI Biological Test for Plastics.
Page 126
ZenPure PureFlo® Pharmaceutical Grade Cartridge
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
C21 Rev 2011.08
PureFlo PES Pharmaceutical Grade Filter Cartridge Ordering Guide
0
1
2
3
4
5
6
7
8
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PureFlo PES Cartridge
0
0.1
0.2
0.3
0.4
0.5
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.1
0.20.45
0.651.2
0.04
0.8
10” Element
PureFlo PES Filter Cartridges
Removal Rating End Modifications LengthO-Ring / Gasket
Package Qty Inserts Pharm Grade
04 = 0.04 micron 0 = 222 O-Ring Flat 1 = 10" E = EPDM 1 = 1pc/ pack Blank = Standard -PH = Pharma GradeMCS = Single Lay er 10 = 0.10 micron 5 = 222 O-Ring Spear 2 = 20" N = Buna N - 5 = SS Insert -ETO = ETO Sterilization
20 = 0.20 micron 6 = 226 O-Ring Flat 3 = 30" S = SiliconeMPS = Dual Lay er 50 = 0.45 micron 7 = 226 O-Ring Spear 4 = 40" V = Viton
65 = 0.65 micron F = DOE Flat Gasket 5 = 5" T = TEV*1X = 1.20 micron S = SOE Flat Gasket U = TES*
Z = SOE Internal 213 O-ring Flat ** -S(pore Size) = PES PreFilter
-G(pore Size)= Glass Fiber PreFilter-P(pore Size)= Poly Pro Media PreFilter
Ex ample - Pharmaceutical grade, 10", 0.2 micron cartridge, w ith 2-222 Silicone o-ring, Flat end cap, and no insert w ould be MCS2001S1-PH* - not av ailable in Code Z ** - only av ailable in 5", 10" and 20"
Effective Filtration Area 0.65 m2 (7 ft2) per 10" cartridge element Operating Conditions
Maximum Forward Differential Pressure: 5.0 bar (73 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
Materials of Construction Membrane: Hydrophilic Polyethersulfone Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene Gasket / O-Rings: EPDM, Buna N, Silicone, Viton, TES, and TEV
Dimensions (nominal) Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm) Diameter: 2.75 in. (7 cm)
Page 127
PureFlo® Biological Reduction Grade Cartridge
ZenPure Ze
nPur
e
Materials of Construction Membrane: Hydrophilic Polyethersulfone Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene Gasket / O-Rings: EPDM, Buna N, Silicone, Viton, TES, and TEV
Dimensions (nominal) Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm) Diameter: 2.75 in. (7 cm)
Effective Filtration Area 0.65 m2 (7 ft2) per 10" cartridge element Sterilization & Autoclaving
The filters can be sterilized by autoclaving for up to 50 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 30 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or com-mon chemicals that are compatible with filter components.
Water Bubble Point Specification 0.1um : 23psi,0.16 MPa (IPA)
0.2um : 45psi,0.32 MPa Operating Conditions
Maximum Forward Differential Pressure: 5.0 bar (73 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
PureFlo® biological reduction grade cartridges are highly re-tentive hydrophilic PES membrane filters that have been de-signed for critical solutions in the pharmaceutical industry. The PES membrane in an all-polypropylene construction pro-vides excellent chemical compatibility. The PureFlo® biological reduction grade cartridge has superior flow per unit area as compared to other membrane cartridges. No adhe-sives, binders, or surfactants are used in the manufacturing process. All cartridges are rinsed with high-purity water to reduce extractables and downtime.
The PureFlo® membrane is inherently hydrophilic and does not require pre-wetting with IPA and flushing with DI water. This eliminates a potential source of contamination and haz-ardous waste. All filter cartridges are 100% integrity tested to ensure filter integrity each and every time. PureFlo biological grade cartridges are well-suited for critical applications where superior flow, microbial reduction and particle retention at 0.1, 0.2, 0.45, 0.65 and 0.8 micron are needed. The PES membrane also exhibits low protein-binding characteristics.
Benefits ■ Superior flow rate reducing process time ■ Long service life ■ Biologically inert ■ Low protein binding, maximizing yields ■ Integrity testable ■ All cartridges are rinsed with high-purity water ■ Provides excellent compatibility with a wide-range of chemicals
Applications Serums Vaccines Biologicals Prefiltration Bacterial Growth Media Pharmaceutical
Intermediates Reagent Chemicals Biologics Fermentation Broths Ophthalmic Solutions Process Water Liquids
Page 128
ZenPure PureFlo® Biological Reduction Grade Cartridge
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
C21.2 Rev 2011.08
PureFlo Biological Grade Ordering Guide
PureFlo PES Membrane
Pore Size (micron)
Connections
Length
Gasket / O-Ring
Materials Package Quantity
Inserts
MCS
PES Membrane with PP
construct on
10 = 0.10 20 = 0.20 50 = 0.45 65 = 0.65 80 = 0.80 1X = 1.20
0 = 222 O-Ring Flat 5 = 222 O-Ring Spear 6 = 226 O-Ring Flat 7 = 226 O-Ring Spear F = DOE Flat Gasket S = SOE Flat Gasket Z = SOE Internal 213
O-ring Flat **
1 = 10"2 = 20" 3 = 30" 4 = 40" 5 = 5"
E = EPDM N = Buna N S = Silicone V = Viton T = TEV * U = TES *
1 = 1 per pack
-B= Biological R e d u c t i o n Grade -5 = Stainless Steel Insert
Example – 10", 0.65 micron cartridge, with 2-222 EPDM O-Rings/Flat Cap and no insert would be MCS6501E1-B * - not available in Code Z **- only available in 5", 10", and 20"
0
1
2
3
4
5
6
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PureFlo PES Cartridge
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.1
0.20.45
0.651.2
0.8
10” Element
Regulatory Compliance Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics
Page 129
PureFlo® BEV Filter Cartridges
ZenPure Ze
nPur
e
PureFlo® BEV filter cartridges are highly-retentive hydrophilic PES membrane filters. The BEV filter has been designed for beverage applications. The PES membrane, with polyester supports and nylon end caps, provided excellent wettability. No adhesives, binders, or surfactants are used in the manufacturing process. All cartridges are rinsed with high-purity water to reduce extractables.
The hydrophilic PES membrane ,with the polyester supports and nylon end caps, enhances the PES pore structure to make it spontaneously wet out in your liquid beverage. No prewet-ting with IPA and flushing with DI water required, thus, elimi-nating a potential source of contamination and hazardous waste. All filter cartridges are flushed and 100% integrity tested to ensure filter performance each and every time. Pure-Flo BEV filter cartridges are well-suited for critical applica-tions where superior flow and particle removal efficiency at 0.1, 0.2, 0.45, 0.65, and 1.2 micron is required.
Dimensions (nominal) Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm) Diameter: 2.75 in. (7 cm)
Effective Filtration Area 0.65 m2 (7.0 ft2) per 10" cartridge element Operating Conditions
Maximum Forward Differential Pressure: 5.0 bar (73 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
Features Benefits ■ Hydrophilic PES Membrane
■ IPA pre-wetting not required – thereby eliminating a potential source of contamination and disposal waste
■ Reduces downtime and improves throughput
■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide-range of chemicals
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during manufacturing resulting in superior downstream cleanliness
■ All cartridges are rinsed with high-purity water
Applications
Wines Beers Liquids Juices Syrups Beverages Process Water Potable Water
Materials of Construction Membrane: Hydrophilic Polyethersulfone Membrane Supports: Polyester Cage and Core: Polypropylene End Caps: Nylon Gasket / O-Rings: EPDM, Buna N, Silicone, Viton, TES, and TEV
Page 130
ZenPure PureFlo® BEV Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
C21.5 Rev 2011.08
PureFlo BEV Filter Cartridge Ordering Guide
0
0.5
1
1.5
2
2.5
3
3.5
4
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PureFlo PES BEV Cartridge
0
0.05
0.1
0.15
0.2
0.25
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.10.2
0.450.65
1.2
SPECIFICATIONS Regulatory Compliance
Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological test for Plastics
Sterilization & Autoclaving
The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 10 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pres-sure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components.
10” Element
PureFlo PES Membrane
Pore Size (micron)
Connections
Length
Gasket / O-Ring
Materials Package Quantity
Inserts
MBS
10 = 0.10 20 = 0.20 50 = 0.45 65 = 0.65 1X = 1.20
0 = 222 O-Ring Flat 5 = 222 O-Ring Spear 6 = 226 O-Ring Flat 7 = 226 O-Ring Spear F = DOE Flat Gasket S = SOE Flat Gasket Z = SOE Internal 213
O-Ring Flat **
1 = 10"2 = 20" 3 = 30" 4 = 40" 5 = 5"
E = EPDM N = Buna N S = Silicone V = Viton T = TEV * U = TES *
1 = 1 per pack Blank = Stan-dard -5 = Stainless Steel Insert
Example – 10", 0.65 micron cartridge, with 2-222 EPDM O-Rings/Flat Cap and no insert would be MBS6501E1
* - not available in Code Z **- only available in 5", 10", and 20"
Page 131
PureFlo® EPS Filter Cartridge (PES/PP layered)
ZenPure Ze
nPur
e
Specifications Materials of Construction: Membrane: Hydrophilic PES with Polypropylene media prefilter Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene Gasket/O-ring: EPDM, Buna N, Silicon, Fluoroelastomer, TES, and TEV Sealing: Thermally welded Fitting Connections: 222, 226, DOE, SOE, internal 213 with Flat or Spear Nominal Dimensions: Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm) Diameter: 2.75 in. (7 cm) Effective Filtration Area: 0.65 m2 (7 ft2) per 10" cartridge element
Operating Conditions: Maximum Forward Differential Pressure: 5.0 bar (73 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
Sterilization & Autoclaving: The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 10 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter com-ponents.
PureFlo® EPS biological reduction grade cartridges are highly retentive, hydrophilic PES membrane filters with a Polypropylene pre-filters layer. They have been designed for critical solutions in the pharmaceutical industry. The PES membrane in an all-polypropylene construction provides excellent chemical compatibility. The PureFlo® EPS Series Cartridge has superior flow per unit area as compared to other membrane car-tridges. No adhesives, binders, or surfactants are used in the manufacturing process. All cartridges are rinsed with high-purity water to reduce extractables and downtime.
The PureFlo® PES membrane is inherently hydrophilic and does not require pre-wetting with IPA and flush-ing with DI water. This eliminates a potential source of contamination and hazardous waste. All filter car-tridges are 100% integrity tested to ensure filter in-tegrity each and every time. PureFlo EPS cartridges are well-suited for critical applications where superior flow, microbial and particle retention at 0.1, 0.2, 0.45, 0.65 and 0.8 micron are needed. The PES membrane also exhibits low protein-binding charac-teristics.
Applications Serums Vaccines Biologicals Prefiltration Bacterial Growth Media Pharmaceutical
Intermediates Reagent Chemicals Biologics Fermentation Broths Ophthalmic Solutions Process Water Liquids
Page 132
ZenPure PureFlo® EPS Series Filter Cartridge
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
C21.6 Rev 2011.08
PureFlo EPS Series Filter Cartridge Ordering Guide
0
1
2
3
4
5
6
7
8
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PureFlo PES Cartridge
0
0.1
0.2
0.3
0.4
0.5
GPM
BarPSID
LPMD
iffer
entia
l Pr
essu
re
Flow Rate @22°C, 1cP Fluid
0.1
0.20.45
0.651.2
0.04
0.8
PureFlo EPS Filter Cartridges
Removal Rating End Modifications LengthO-Ring / Gasket
MaterialsPackage Qty PP Second Layer Options
04 - 0.04 micron 0 = 222 O-Ring Flat 1 - 10" E = EPDM 1 = 1pc/ pack -P003 = 0.30uEPS 10 - 0.10 micron 5 = 222 O-Ring Spear 2 - 20" N = Buna N -P006 = 0.60u
20 - 0.20 micron 6 = 226 O-Ring Flat 3 - 30" S = Silicone -P010 = 1u - 5 = SS Insert50 - 0.45 micron 7 = 226 O-Ring Spear 4 - 40" V = Viton -P030 = 3u65 - 0.65 micron F = DOE Flat Gasket 5 = 5" T = TEV* -P050 = 5u80 - 0.80 micron S = SOE Flat Gasket U = TES* -P070 = 7u1X - 1.20 micron Z = SOE Internal 213
O-ring Flat **-P100 = 10u
PES Membrane w ith PP prefilter
-B =Bio-Reduction grade
Example - EPS Filter, 10", 0.45 micron PES, w ith 226 Silicone o-ring w ith Spear and 1.0um PP prefilter, and no insert w ould be EPS5071S1-P010-B * - not av ailable in Code Z ** - only av ailable in 5", 10" and 20"
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regula-tions and USP Class VI Biological Test for Plastic.
Page 133
PureFlo® General Grade Cartridges
ZenPure Ze
nPur
e
PureFlo® general grade (PES) filter cartridges are a cost-effective alternative to standard or pharmaceutical grade cartridges for prefiltration of aqueous-based liquids. The PES membrane in a high-purity all polypropylene construction pro-vides excellent chemical compatibility and competitive flow rates per unit area. No adhesives, binders, or surfactants are used in the manufacturing process.
The hydrophilic PES membrane does not require pre-wetting with IPA then flushing with water, thereby eliminating a potential source of contamination and hazardous waste. In addition, unlike hydrophobic filters such as polypropylene and PTFE, the hydrophilic membrane reduces the potential for bubble formation by not de-wetting in out-gassing fluids.
General grade PES filter cartridges are fabricated and packaged under clean room conditions.
Materials of Construction Membrane: Hydrophilic Polyethersulfone Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene Gasket / O-Rings: EPDM, Buna N, Silicone, Viton, TES,
and TEV Dimensions (nominal)
Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm) Diameter: 2.75 in. (7 cm)
Effective Filtration Area 0.6 m2 (6.5 ft2) per 10" cartridge element Operating Conditions
Maximum Forward Differential Pressure: 5.0 bar (73 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
Applications Inks
Dyes
Parts Cleaning
Process Water
Plating Solutions
Liquid Clarification
Features Benefits ■ Hydrophilic PES Membrane
(Absolute Rated)
■ IPA pre-wetting not required – thereby eliminating a potential source of contamination and disposal waste
■ Reduces downtime and improves throughput ■ No adhesives, binders, or surfactants are used during
manufacturing resulting in superior downstream cleanliness
■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide-range of chemicals
■ Economic Filtration ■ Cost-effective product
Page 134
ZenPure PureFlo® PES Filter Cartridges General Grade
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
C22 Rev 2011.08
PES Filter Cartridge Ordering Guide - General Grade
PES Filter Cartridges Removal Rating End Modifications Length O-Ring / Gasket Materials Package Qty Inserts
04 - 0.04 micron 0 = 222 O-Ring Flat 1 - 10" E = EPDM 1 = 1pc/ pack Blank = StandardMGS 10 - 0.10 micron 5 = 222 O-Ring Spear 2 - 20" N = Buna N
20 - 0.20 micron 6 = 226 O-Ring Flat 3 - 30" S = Silicone50 - 0.45 micron 7 = 226 O-Ring Spear 4 - 40" V = Viton65 - 0.65 micron F = DOE Flat Gasket 5 = 5" T = TEV*80 - 0.80 micron S = SOE Flat Gasket U = TES*
1X - 1.20 micronZ = SOE Internal 213 O-Ring Flat **
**- only av alible in 5", 10", and 20" *-not av alible in Code Z
Ex ample - PES General Grade, 10", 0.2 micron cartridge, w ith 2-222 Silicone o-ring, Flat end cap, and no insert w ould be MGS2001S1
- 5 = Stainless Steel Insert
0
1
2
3
4
5
6
7
8
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PES General Grade Cartridge
0
0.1
0.2
0.3
0.4
0.5
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.1
0.20.45
0.651.2
0.04
0.8
Regulatory Compliance Manufactured from materials
that conform to the require-ments of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics
Sanitizing Agents
Cartridges may be sanitized by common chemical sani-tizing agents that are com-patible with filter components.
Page 135
PES Filter Cartridge—Water Grade
ZenPure Ze
nPur
e
Water grade Polyethersulfone (PES) filter cartridges are a cost-effective alternative to standard or pharmaceutical grade cartridges for the filtration of aqueous-based liquids. The PES membrane in a high-purity all polypropylene construc-tion provides excellent chemical compatibility and competi-tive flow rates per unit area. No adhesives, binders, or surfac-tants are used in the manufacturing process.
The hydrophilic PES membrane does not require pre-wetting with IPA then flushing with water, thereby eliminating a potential source of contamination and hazardous waste. In addition, unlike hydrophobic filters such as polypropylene and PTFE, the hydrophilic membrane reduces the potential for bubble formation by not de-wetting in out-gassing fluids.
Water grade PES filter cartridges are fabricated and packaged under cleanroom conditions.
Materials of Construction Membrane: Hydrophilic Polyethersulfone Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene Gasket / O-Rings: EPDM, Buna N, Silicone, Viton,
TES, and TEV Dimensions (nominal)
Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm) Diameter: 2.75 in. (7 cm)
Effective Filtration Area 0.52 m2 (5.6ft2) per 10" cartridge element Operating Conditions
Maximum Forward Differential Pressure: 5.0 bar (73 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
Features Benefits ■ Hydrophilic PES Membrane
(Absolute Rated)
■ IPA pre-wetting not required – thereby eliminating a potential source of contamination and disposal waste
■ Reduces downtime and improves throughput ■ No adhesives, binders, or surfactants are used during
manufacturing resulting in superior downstream cleanliness
■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide-range of chemicals
■ Economic Filtration ■ Cost-effective product
Applications
Inks Pre Filter for Water
Dyes DI Water
Parts Cleaning Process Water
Process Water Chemicals
Plating Solutions Acids
Liquid Clarification Bases
Page 136
ZenPure PES Filter Cartridge – Water Grade
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
C23 Rev 2011.08
PES Filter Cartridge Ordering Guide - General Grade
Regulatory Compliance Manufactured from materials
that conform to the require-ments of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics
Sanitizing Agents
Cartridges may be sanitized by common chemical sani-tizing agents that are com-patible with filter components.
0
1
2
3
4
5
6
7
8
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PES Cartridge - Water Grade
0
0.1
0.2
0.3
0.4
0.5
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.1
0.20.45
0.651.2
0.04
0.8
PES Filter Cartridges Removal Rating End Modifications Length O-Ring / Gasket Materials Package Qty Inserts
04 - 0.04 micron 0 = 222 O-Ring Flat 1 - 10" E = EPDM 1 = 1pc/ pack Blank = StandardMWS 10 - 0.10 micron 5 = 222 O-Ring Spear 2 - 20" N = Buna N
Water Grade 20 - 0.20 micron 6 = 226 O-Ring Flat 3 - 30" S = Silicone50 - 0.45 micron 7 = 226 O-Ring Spear 4 - 40" V = Viton65 - 0.65 micron F = DOE Flat Gasket 5 = 5" T = TEV*80 - 0.80 micron S = SOE Flat Gasket U = TES*
1X - 1.20 micronZ = SOE Internal 213 O-Ring Flat **
**- only av alible in 5", 10", and 20" *-not av alible in Code Z
Ex ample - Water Grade, 10", 0.2 micron cartridge, w ith 2-222 Silicone o-ring, Flat end cap, and no insert w ould be MWS2001S1
- 5 = Stainless Steel Insert
Page 137
PureFlo® Glass MicroFiber Filter Cartridges
ZenPure Ze
nPur
e
PureFlo® borosilicate microfiber filter cartridges are highly retentive filters that have a pleated design to maximize surface area. The borosilicate microfiber media in an all polypropyl-ene construction provides excellent chemical compatibility and superior flow per surface area. No adhesives or surfactants are used in the manufacturing process. The borosilicate microfiber is “non-fiber releasing.”
The borosilicate microfiber is ideally-suited for microbial reduction. In addition, the media provides superior flow and pressure drop characteristics per unit area. PureFlo® microfi-ber filter cartridges are well-suited for critical applications where superior flow and particle retention for deformable and non-deformable particle removal is required.
Materials of Construction Media: Borosilicate Microfiber Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicone, EPDM, Viton, Buna N, TES, and TEV
Dimensions (nominal) Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm) Diameter: 2.75 in. (7 cm)
Effective Filtration Area 0.47 m2 (5.0 ft2) per 10" cartridge element
Operating Conditions Maximum Forward Differential Pressure: 5.0 bar (72.5 psid) at 68°F/20° C 2.0 bar (29 psid) at 176°F/80° C Maximum Reverse Differential Pressure: 3.0 bar (43.5 psid) at 68°F/20° C 1.0 bar (14.5 psid) at 176°F/80° C Maximum Operating Temperature: 176°F/80°C
Features Benefits ■ Borosilicate Microfiber media
■ High dirt-loading capacity ■ Superior filter lifetime and process throughputs
■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide range of chemicals
■ No media migration into the process fluid
■ Quality Construction ■ No adhesives, binders, or surfactants are used during the manufacturing process resulting in superior downstream cleanliness
■ Thermally welded construction to eliminate bypass
Applications
Prefiltration Biologics
Serums Bio-Burden Reduction Pharmaceuticals Retention of
Deformable Particles Wine Clarification Inks Food & Beverage Cosmetics
Page 138
ZenPure PureFlo® Glass MicroFiber Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
C23.5 Rev 2011.08
Glass Fiber Membrane
Type
Pore Size (micron)
Connections Length Gasket / O-Ring
Materials
Package Quantity
Inserts
NCG
Glass Fiber with PP
construction
04 = 0.45 05 = 0.5 10 = 1.0 30 = 3.0 50 = 5.0 1X = 10
0 = 222 O-Ring Flat 5 = 222 O-Ring Spear 6 = 226 O-Ring Flat 7 = 226 O-Ring Spear F = DOE Flat Gasket S = SOE Flat Gasket Z = SOE Internal 213
O-Ring Flat **
1 = 10" 2 = 20" 3 = 30" 4 = 40" 5 = 5" 9 = 9.75"
E = EPDM N = Buna N S = Silicone V = Fluro-Elastomer T = TEV * U = TES *
1 = 1 per pack
Blank = Standard 5 = Stainless Steel Insert
Example – 20", 0.20 micron, with 2-222 EPDM O-Rings/Flat Cap and no insert would be NCG2002E1 * - not available in Code Z **- only available in 5", 10", and 20"
PureFlo Glass Microfiber Filter Cartridge Ordering
SPECIFICATIONS Regulatory Compliance
Manufactured from materials that conform to the requirements of USP Class VI Biologi-cal Test for Plastics
Sterilization & Autoclaving
The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The fil-ters can also be sterilized by steam-in-place procedure up to 10 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components.
0
0.5
1
1.5
0
0.02
0.04
0.06
0.08
0.1
0 2 4 6 8 10
0 5 10 15 20 25 30 35
PureFlo Glass MicroFiber Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid10" Cartridge
5.010um and above
1.00.50.45
3.0
Page 139
Thermally Bonded Polypropylene Depth Cartridges
ZenPure Ze
nPur
e
®
Thermally bonded polypropylene depth filter cartridges utilize graded density media that is well-suited for clarifi-cation and pre-filtration applications where high particle removal is essential. The graded density design efficiently captures contaminants throughout the media matrix, re-sulting in excellent contaminant holding capacity, life-time, and pressure drop. Furthermore, the all-polypropylene construction provides excellent thermal and chemical compatibility with high and low high pH chemicals.
These polypropylene depth filter cartridges come in pore size ratings of 0.5 to 75 micron with lengths from 5" to 40" to meet your applications. Materials of Construction
Media: Polypropylene Melt Blown Fibers Dimensions (nominal)
Lengths: 9 3/4", 9 7/8",10",19 1/2", 20", 29 1/4", 30", 39" and 40" Diameter: 2.5"
Operating Conditions
Maximum Forward Differential Pressure: 3.4 bar (50 psid) at 68°F/20°C Maximum Reverse Differential Pressure: 3.0 bar (44 psid) at 68°F/20°C Maximum Operating Temperature: 180°F/82°C
Regulatory Compliance
Manufactured from materials that conform to the FDA requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations
Features Benefits ■ Graded Density Polypropylene Media
■ Media matrix removes particles throughout the entire depth of the filter cartridge
■ High flow rates and low pressure drops ■ Economic alternative for high particle level fluids ■ Superior lifetime and throughput
■ 100% Polypropylene Construction ■ Provides excellent thermal and chemical compatibility with a wide-range of chemicals
■ Quality Manufacturing ■ Consistent and reproducible particle removal
Applications Pre Reverse Osmosis Ink
Hydrocarbons Electronics Solvents Water
Fine Chemicals Biologics
Plating Solutions Dyes
Parts Cleaning Gas Processing
Page 140
ZenPure Thermally Bonded Polypropylene Depth Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
c26 Rev 2011.08
Thermally Bonded Polypropylene Depth Filter Ordering Guide
Thermally Bonded PolyPro Depth Micron Rating Length Side A Connection Side B Connection Seal Material
JT 1 = 1.0um 9 3/4 = 9 3/4" OE = Open End OE = Open End Blank = No Seal3 = 3.0um 9 7/8 = 9 7/8" EC = Extended Core BAY = Fin/Bayonet E = EPDM
Nominal 5 = 5.0um 10 = 10" 222 = 222 O-Ring C = Closed End Cap B = Buna NRated 10 = 10um 19 1/2 = 19 1/2" 226 = 226 O-Ring EC = Extended Core S = Silicone
20 = 20um 20 = 20" FG = Flat Gasket FG = Flat Gasket SP = Santoprene50 = 50um 29 1/2 = 29 1/2" S = Spring End Cap V = Viton75 = 75um 30 = 30"
39 = 39"40 = 40"
Example – PP depth filter, 5.0 micron cartridge, 20" DOE, would be JT-5-20-OE-OE
Box Quantity Packaging only: 9 3/4” - 10” (30/case) 19 1/2” - 40” (20/case)
0
0.5
1
1.5
2
0
0.02
0.04
0.06
0.08
0.1
0.12
0 1 2 3 4 5
0 4 8 12 16Thermally Bonded Melt Blown filter
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
10" Standard Element
1um 3um
20um10um
5um
50um 75um
Page 141
ZenPure Thermally Bonded Polypro 2.5” & 4.5” Cartridges
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
C27 Rev 2011.08
®
Thermally Bonded Polypropylene double open ended 2.5” & 4.5” diameter filter cartridges utilize graded den-sity media that is well suited for clarification and pre-filtration applications where high particle removal is es-sential. The graded density design efficiently captures contaminants throughout the media matrix resulting in excellent contaminant holding capacity, lifetime, and pres-sure drop. Furthermore, the all polypropylene construction provides excellent thermal and chemical compatibility with high and low high pH chemicals.
These economic alternatives for high particle level flu-ids are consistent and reproducible particle removal filters. They provides excellent thermal and chemical compatibility with a wide range of chemicals. These polypropylene depth filter cartridges come in pore size ratings from 1 to 50 micron with lengths of 10 and 20 inches to meet your applications.
Applications Pre-Reverse Osmosis Ink
Home Water Filtration Swimming Pools
Solvents Water
Chemicals Parts Cleaning
Plating Solutions Dyes
Materials of Construction Media: Polypropylene Melt Blown Fibers
Dimensions (nominal) Lengths: 10" (9 7/8), 20" Diameter: 2.5”, 4.5"
Operating Conditions Maximum Forward Differential Pressure:
3.4 bar (50 psid) at 68°F/20 °C Maximum Reverse Differential Pressure:
3.0 bar (44 psid) at 68°F/20 °C Maximum Operating Temperature: 180°F/82°C
Regulatory Compliance Manufactured from materials that conform to the FDA requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations, and NSF Certified.
Thermally Bonded PP 2.5” & 4.5” Filter Cartridge Ordering Guide
Graded Density Outer Middle Inside1 Micron Filter Layers 20um 5um 1um5 Micron Filter Layers 30um 10um 5um10 Micron Filter Layers 30um 20um 10um20 Micron Filter Layers 50um 30um 20um50 Micron Filter Layers 100um 100um 50um
10" (2.5" diameter)- 50 to a Case20" (2.5" diameter)- 25 to a Case10" (4.5" diameter)- 18 to a Case20" (4.5" diameter)- 9 to a Case
Density Layers
Case Quantities
Thermally Bonded Polypropylene Removal Rating Length Diameter00.5 = 0.5 micron 249 = 10" Blank = 2.5"001 = 1 micron 508 = 20" B = 4.5"
LF-PP = Gradient Density 005 = 5 micronPolypropylene Filter 010 = 10 micron*
020 = 20 micron050 = 50 micron
Example: LF-PP-001-508-B is a Thermally bonded PP 4.5" Cartridge, 1 micron, 20" length*Note: The 10 micron is only available in a 2.5" diameter
Page 142
ZenPure PureFlo® Activated Carbon Fiber Cartridge
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
C28.8 Rev 2011.07
Activated carbon fiber cartridges are designed to re-move organic compounds, hydrocarbons, chlorine, color, and odors from aqueous and organic liquids. The unique fibrous carbon media is designed for maximum flow and contaminant removal without the release of carbon fibers. The fibers allow for efficient contact time and adsorption capacity. Designed with clean, durable polyethylene end caps, cage and core to pro-vide superior downstream cleanliness.
No adhesives, binders, or surfactants are used in the manufacturing process. Each cartridge is manufactured under tight process control to achieve a uniform prod-uct with every filter. These activated carbon filters are available in a range of lengths and connections to suit your individual purification and filtration needs. The cartridges are manufactured to fit most single and multi-round housings.
Materials of Construction Membrane: Fibrous Activated Carbon Cage, Core, End Caps: Polypropylene Gaskets: EPDM, Silicon, Buna N, and Viton
Dimensions (nominal) Lengths: 10 - 40 in. (250 - 1016 mm) Diameter: 2.75 in. (70 mm)
Operating Conditions Maximum Forward Differential Pressure: 4.5 bar (65psi) at 68°F/20°C 2 bar (29psi) at 176°F/80°C Maximum Reverse Differential Pressure: 3.0 bar (44psi) at 68°F/20°C 1.0 bar (14.5psi) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
PureFlo Activated Carbon Fiber Filter Ordering Guide
0
0.5
1
1.5
2
2.5
3
0
0.05
0.1
0.15
0.2
0 5 10 15 20 25
0 20 40 60 80
PureFlo Activated Carbon Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @ 22°C, 1cP Fluid
Activated Carbon Fiber Filter
Removal Rating End Modifications LengthO-Ring / Gasket
MaterialsPackage Qty
0 = 222 O-Ring Flat 1 = 10" E = EPDM 1 = 1pc/ packWCC 10 - 10 micron 5 = 222 O-Ring Spear 2 = 20" N = Buna N
(Nominal) 6 = 226 O-Ring Flat 3 = 30" S = Silicone7 = 226 O-Ring Spear 4 = 40" V = Fluoro-ElastomerF = DOE Flat Gasket 5 = 5" T = TEV*S = SOE Flat Gasket 9 = 9.75" U = TES*
*-not av alible in Code ZExample - One 10" cartridge, w ith DOE Flat EPDM Gasket w ould be WCC10F1E1
Z = SOE Internal 213 O-ring Flat
Page 143
String Wound Filter Cartridges
ZenPure Ze
nPur
e
String wound filter cartridges are manufactured using a high speed, continuous wind process which creates a supe-rior one-piece filter with hundreds of diamond shaped tun-nels that get progressively smaller from the outer diameter to the core. Finer particles are progressively trapped as fluid travels to the center of the filter which allows for a much greater retention capacity than flat surface filter media of the same dimensions and porosity.
The 10" and 20" string wound filters have a unique dual density that is superior to most string wound filters. The filters are wound at high tension for the first half of the winding process and then at a lower tension during the second half of the wind. This produces a superior and ef-ficient filter that does not blind as quickly, thereby giving longer filter life with better filtration without compromis-ing efficiency.
The winding pattern provides 3.5 square feet per each 10 inches of cartridge length. For each 10 inch filter length there will be approximately 1/2 to 1 pound retention of solids before replacement becomes necessary. The amount of solids retained depends on the type of solids in the solution as well as the head pressure developed by the pump.
String wound filters can be custom made from 4" to 72" in length and from 2" to 5" in diameter. We can satisfy your filtration needs by producing filters with filtration capabilities from 0.5 microns up to 400 microns.
Materials of Construction Media: Cotton, Polypropylene, Rayon, Polyes-
ter, Nylon, Fiberglass, and Ryton
Core Material: Polypropylene, Tin Plated Steel, 304 Stainless Steel, 316 Stainless Steel
Core Cover: Polypropylene, Nylon, Fiberglass
Gaskets/ O-rings: EPDM, Buna N, Silicon, Viton, TEV
Dimensions (nominal) Lengths: 5" to 40" (up to 72” custom) Diameters: 2 1/4", 2 3/8", 2 7/16", 4 1/2" (and custom from 2" to 5")
Features Benefits ■ Dual Density string wound
■ Two zones to provide increased depth filtration that does not blind as quickly as standard filters
■ Wound in a precise pattern around the core providing greater surface area. The result is higher dirt-loading capacity and greater efficiency than standard wound cartridges
■ Wide variety of materials to choose from ■ 11 different classifications of material to meet your specific filtration needs
■ Quality Manufacturing ■ Most technically advanced string wound filter on the market
■ Continuous wound with no seams or binders
®
Page 144
ZenPure String Wound Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
c28 Rev 2011.07
String Wound
CartridgesMEDIA MICRON
RATING
NOMINAL DIAMETER (INCHES)
NOMINAL LENGTH (INCHES) CORE MATERIAL: CORE COVER END TREATMENT, CORE EXTENSIONS Gasket/ O-Ring materials
C = FDA Bleached Cotton 05 = 0.5um B = 2 1/4" 5 = 5" P = Polypropylene Blank = None Blank = None Blank = NoneW = Industrial White Cotton 1 = 1.0um E = 2 3/8" 9.5 = 9 1/2" T = Tin Plated Steel N = Nylon 0 = 222 O-Ring Flat, PP E = EPDM
SW U = Natural Cotton 3 = 3.0um 9.75 = 9 3/4" S = 304 Stainless Steel P = Polypropylene 5 = 222 O-Ring Spear, PP N = Buna NP = Polypropylene 5 = 5.0um 10 = 10" (standard) A = 316 Stainless Steel G = Fiberglass 6 = 226 O-Ring Flat, PP S = SiliconA= FDA Polypropylene 10 = 10um P = 4 1/2" 19.5 = 19 1/2" C = Cotton 7 = 226 O-Ring Spear, PP V = VitonF = Fibrillated Polypropylene 15 = 15um 20 = 20" 6 = 226 O-Ring Flat, PP T = TEVR = Rayon 20 = 20um 30 = 30" F = DOE Flat Gasket, PPY = Polyester 25 = 25um 40 = 40" S = SOE Flat Gasket/Flat, PPN = Nylon 30 = 30um PE =Poly Core Insert
G = Fiberglass 40 = 40um AE = 316 SS Core InsertT = Ryton 50 = 50um EC = Extended Crimped Core
75 = 75um CC = Core Connector100 = 100um PS = Poly Spring125 = 125um PM = Metal Spring (poly cap)150 = 150um ACS = Std. 316SS Cap and Spring250 = 250um350 = 350um
Example – String Wound FDA bleached cotton, 3um, 2 7/16" Diameter, 10", Polypropylene core - SWC3R10P
R = 2 7/16" (standard)
Media Max Temp ApplicationsBleached Cotton ( C) 300° F For potable liquids, vegetable oils, beverages, organic solvents,
FDA 150° C water, dilute acids, petroleum oils, and other services.
Industrial White Cotton 300° F Same (non - FDA) applications as bleached cotton.(W) 150° C
Natural Cotton (U) 300° F Same (non - FDA) applications as bleached cotton.150° C
Polypropylene (P) 180° F Filtration of organic acids, alkalies, solvents and many 82° C other chemicals. Very effective in low viscosity solutions.
FDA Polypropylene (A) 180° F Same chemical compatibility as polypropylene, fiber complies with82° C FDA regulation that permits contact with food and edible products.
Fibrillated 180° F Same chemical compatibility as polypropylene. Has no finish onPolypropylene (F) 82° C material, therefore, will not cause foaming.
Rayon ( R) 300° F Chemical compatibility similar to cotton. Used primarily in 150° C filtration of petroleum oils.
Polyester (Y) 250° F Chemical compatibility similar to cotton and polypropylene. Has a 121° C higher temperature resistance than polypropylene in most cases.
Nylon (N) 350° F Used for special process applications, concentrated alkalies and 177° C hydrocarbons.
Fiberglass (G) 750° F Filtration of organic acids, organic solvents, petroleum 399° C 399° C oils, mineral acids, and other corrosive or high-temperature services
Ryton (T) 375° F Similar chemical compatibility to both Nylon and Fiberglass. Excellent191° C resistance to solvents and acids except for hot sulfuric acid and
nitric acid.
String Wound Filter Cartridge Ordering Guide
Specials available upon request
Page 145
ZenPure
This page left blank intentionally
ZenP
ure
Page 146
Pu
reFl
o M
ini Fi
lter
Cart
rid
ge S
eri
es
Siz
es
an
d E
nd
Co
nfi
gu
rati
on
ZenP
ure
ZenP
ure
Nor
th &
Sou
th A
mer
icas
: Ze
nPur
e Am
eric
as, I
nc
ww
w.ze
npur
e.co
m
Info
-us@
zenp
ure.
com
70
3-33
5-99
10
All O
ther
Reg
ions
: Ze
nPur
e Co
rpor
atio
n w
ww.
zenp
ure.
com
in
fo@
zenp
ure.
com
+8
6 57
1 22
88 6
800
C28
.9
Rev
201
1.07
H-
1.5”
S-
2.5”
L-
5”
015
O-R
ing
116
Hou
sing
Sea
l 11
6 In
ner
O-
Rin
g 11
8 O
-Rin
g 1/
2” M
NPT
Flan
ge
116
Inne
r O
-Rin
g w
ith lo
ckin
g G
roov
e 12
3 O
-Rin
g w
ith
hold
dow
n ta
bs
Page
147
PureFlo® Polypro Mini Membrane Filter Cartridges
ZenPure Ze
nPur
e
PureFlo® polypropylene membrane filter cartridges are highly retentive and naturally hydrophobic filters. Polypropylene membrane is a reliable choice for the purification of aggressive chemicals, compressed gases, and vent applications. The all-polypropylene construction is an excellent economic alternative to the more expensive fluoropolymer based cartridges.
No adhesives, binders, or surfactants are used in the manufacturing process. Furthermore, the all-polypropylene construction provides excellent thermal and chemical compatibility with low and high pH chemicals.
PureFlo polypropylene mini membrane filter cartridges are absolute-rated to ensure consistent filter performance each and every time out of the package. All filter cartridges are 100% integrity tested to ensure filter performance.
Materials of Construction Media: Polypropylene Membrane (hydrophobic) Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicone, EPDM, Fluoroelastomer, Buna N
Dimensions (nominal) Lengths: 1.5in (38mm), 2.5 in (75 mm), 5 in. (135 mm) Diameter: 2.2 in. (56 mm)
Effective Filtration Area 0.7 ft2 (650 cm2) per 1.5" cartridge 1.4 ft2 (1300 cm2) per 2.5" cartridge 2.7 ft2 (2500 cm2) per 5.0" cartridge
Operating Conditions Maximum Forward Differential Pressure: 4.1 bar (60 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 2.0 bar (29 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
Regulatory Compliance Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics.
Applications Acids Ink Bases Parts Cleaning Solvents Pharmaceuticals Fine Chemicals Biologics Plating Solutions Venting
Retrofits Code 2230, 4463, 4440 & SLK
Features Benefits ■ Polypropylene Pleated Membrane Media
(Absolute Rated)
■ Consistent and reproducible particulate removal ■ High flow rates and low pressure drops ■ Superior filter lifetime and process throughputs
■ 100% Polypropylene Construction ■ Provides excellent compatibility with a wide-range of chemicals such as acids, bases, and solvents
■ No media migration into the process fluid
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during manufacturing resulting in superior downstream cleanliness
■ All cartridges are rinsed with high-purity water to reduce extractables and downtime
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 5 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compati-ble with filter components.
Page 148
ZenPure PureFlo® Polypro Mini Membrane Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
C29 Rev 2011.08
PureFlo Polypropylene Mini Membrane Filter Cartridge Ordering Guide
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 1.5" PolyPro Membrane Mini
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.10.2
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 2.5" PolyPro Membrane Mini
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.1
0.2
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 5" PolyPro Membrane Mini
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.1
0.2
PureFlo Mini PP Filter Cartridges
Removal Rating
(Micron)End Modifications Length O-Ring / Gasket
Materials Package Qty
MMP = Mini PP 010 = 0.1 A = 116 Internal O-Ring H = 1.5" E = EPDM 2P = 2pc/ pack (5")Membrane 020 = 0.2 C = 015 O-Ring S = 2.5" N = Buna NCartridge D = 1/2" MNPT L = 5" S = Silicone
E = 118 O-Ring V = Viton OptionF = Flange* 0 = O-Ringless Seal - 5 = SS InsertM = 123 O-Rings**N = 116 Internal Housing Seal
* - F end mondification is compatible to fit in a PALL SealKleenTM Housing, **- M end modification is compatible to fit in a Millipore OptiSealTM HousingExample - A 3 pack of 2.5", 0.1 micron filters with 116 internal EPDM o-ring would be MMP010ASE3P
3P = 3pc/ pack (1.5" and 2.5")
S = 116 Internal O-Ring w/Locking Groove
Flange End Modification
Page 149
PureFlo® Polypro Mini Filter Cartridges
ZenPure Ze
nPur
e
PureFlo® polypropylene mini filter cartridges are highly retentive graded porosity polypropylene media filters that have been specially designed for clarification and pre-filtration applications.
The graded porosity design removes particles in sequence by size exclusion – larger particles by the more open outer layers and smaller particles by the tighter inner layers. The outer layers act as a pre-filter while the inner layers provide the absolute rating at the specified pore size. This efficiently spreads the contaminants throughout the media matrix resulting in superior contaminant hold-ing capacity, lifetime, and pressure drop as compared to other media cartridges. No adhesives, binders, or surfactants are used in the manufacturing process. The non-woven media does not allow for migration into the process fluid, thereby reducing the potential for extractables and downtime. Furthermore, the all-polypropylene con-struction provides excellent thermal and chemical compatibility with low and high pH chemicals.
PureFlo polypropylene mini filter cartridges are absolute-rated to ensure consistent filter performance each and every time out of the package at 0.3, 0.6, 1, 3, 5, 7, 10, 30, 50 and 70 microns.
Applications Acids Ink Jets Bases Beverages Solvents Pharmaceuticals Fine Chemicals Biologics Plating Solutions Dyes Process Water Parts Cleaning
Features Benefits ■ Graded Porosity Pleated
Polypropylene Media ■ Media matrix removes particles in sequence by size – larger
particles by the more open outer layers and smaller particles by the tighter inner layers
■ High flow rates and low pressure drops ■ Superior filter lifetime and process throughputs
■ 100% Polypropylene Construction ■ Excellent thermal and chemical compatibility ■ No media migration
■ Absolute-Rated Filter Performance ■ Consistent and reproducible particulate removal
■ Low Filter Extractables ■ No adhesives, binders, or surfactants used ■ Excellent downstream cleanliness reduces start-up time
Materials of Construction Media: Graded Porosity Non-Woven Polypropylene Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicone, EPDM, Fluoroelastomer, Buna N
Dimensions (nominal) Lengths: 1.5in (38mm),2.5 in (75 mm), 5 in. (135 mm) Diameter: 2.2 in. (56 mm)
Effective Filtration Area 0.59 ft2 (550 cm2) per 1.5" cartridge 1.3 ft2 (1200 cm2) per 2.5" cartridge 2.368 ft2 (2200 cm2) per 5.0" cartridge
Operating Conditions Maximum Forward Differential Pressure: 4.1 bar (60 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 2.0 bar (29 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 5 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compati-ble with filter components.
Retrofits Code 2230, 4463, 4440 & SLK
Regulatory Compliance Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological test for Plastics
Page 150
ZenPure PureFlo® Polypro Mini Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
D30 Rev 2011.08
PureFlo Polypropylene Mini Filter Cartridge Ordering Guide
0
1
2
3
4
5
6
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo Mini PP (1.5in) Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.3 0.6
1.0
5.0, 10
30, 50, 70
3.0
0
1
2
3
4
5
6
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo Mini PP (2.5in) Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.3
0.6
1.05.0, 10
30, 50, 70
3.0
Flange End Modification
0
0.5
1
1.5
2
2.5
3
0
0.05
0.1
0.15
0.2
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo Mini PP (5in) Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.3
0.6
1.05.0, 10
30, 50, 70
3.0
PureFlo Mini PP Filter Cartridges Removal Rating End Modifications Length O-Ring / Gasket
Materials Package Qty
003 = 0.3um A = 116 Inner O-Ring H = 1.5" E = EPDM 2P = 2pc/ pack (5")NMP = Mini PP 006 = 0.6um C = 015 O-Ring S = 2.5" N = Buna N
Cartridge 010 = 1.0um D = 1/2" MNPT L= 5" S = Silicone030 = 3.0um E = 118 O-Ring V = Viton050 = 5.0um F = Flange* 0 = O-Ringless 070 = 7.0um M = 123 O-Rings**100 = 10 um N = 116 Inner Housing Seal300 = 30 um Option500 = 50 um - 5 = SS Insert700 = 70 um
* - F end mondification is compatible to fit in a PALL SealKleenTM Housing, **- M end modification is compatible to fit in a Millipore OptiSealTM HousingExample - A 3 pack of 2.5", 3 micorn filters with 116 Internal EPDM o-ring would be NMP030ASE3P
3P = 3pc/ pack (1.5" and 2.5")
S = 116 Internal O-Ring w/Locking Groove
Page 151
PureFlo® Mini Depth Pleated PP Filters (Depth PP Media on PP Construction)
ZenPure Ze
nPur
e
High Contaminant Holding Filtration
PureFlo® Pleated Depth Mini-Cartridge filters are designed for filtration and clarification applications in the pharmaceutical, biotechnology, food and beverage, medical, chemical, and water indus-tries. This family of products is particularly suit-able for the fluids that contain gels, colloidal sus-pensions, or high suspended solids.
Highly retentive graded porosity design removes particles by size exclusion – larger particles by the more open outer layers and smaller particles by the tighter inner layers. The outer layers act as a pre-filter while the inner layers provide the absolute rating at the specified pore size. This efficiently spreads the contaminants throughout the media matrix, thereby, resulting in superior contaminant holding capacity, lifetime, and lower pressure drop as compared to other depth media cartridges.
Applications Clarification Ink Gel Removal Beverages Yeast Removal Pharmaceuticals Fine Chemicals Biologics Plating Solutions Wine Beer Water Specifications
Materials of Construction: Media: Non-Woven Polypropylene Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicone, EPDM, Fluoroelastomer, Buna N,
Nominal Dimensions: Lengths: 1.5”, 2.5”, 5”, and 10” Diameter: 2.2 in. (56mm)
Available Ratings: 0.5um, 1.0um, 1.5um, 2.5um, 4.5um, 10um, and 20um
Operating Conditions: Maximum Forward Differential Pressure: 4.1 bar (60 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 2.0 bar (29 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the US Code of Federal Regulations and USP Class VI Biological Test for Plastic.
Page 152
ZenPure PureFlo® Mini Pleated PP Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
D30.5 Rev 2011.08
PureFlo Mini Depth Pleated PP Filter Cartridge and Capsule Ordering Guide
0
1
2
3
4
5
6
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0 0.5 1 1.5 2 2.5
0 2 4 6 8
PureFlo Mini Depth Pleated PP (1.5in) Cartridge
GPM
BarPSID
LPM
Dif
fere
nti
al
Pre
ssu
re
Flow Rate @22°C, 1cP Fluid
1.5
2.5
4.5
10
0
1
2
3
4
5
0
0.04
0.08
0.12
0.16
0.2
0.24
0.28
0.32
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo Mini Depth Pleated PP (2.5in) Cartridge
GPM
BarPSID
LPM
Dif
fere
nti
al
Pre
ssu
re
Flow Rate @22°C, 1cP Fluid
1.5
2 5
4.510
0
0.5
1
1.5
2
2.5
3
3.5
4
0
0.05
0.1
0.15
0.2
0.25
0 1 2 3 4 5
0 4 8 12 16
PureFlo Mini Depth Pleated PP (5in) Cartridge
GPM
BarPSID
LPM
Dif
fere
nti
al
Pre
ssu
re
Flow Rate @22°C, 1cP Fluid
1.5
2.5
4.510
PureFlo Depth Pleated Mini PP
Filter CartridgesRemoval Rating End Modifications Length O-Ring / Gasket
Materials Package Qty
002 = 0.2 micron A = 116 Inner O-Ring H = 1.5" E = EPDM 2P = 2pc/ pack (5")JDP = Mini Depth 005 = 0.5 micron C = 015 O-Ring S = 2.5" N = Buna N
Pleated PP 010 = 1.0 micron D = 1/2" MNPT L= 5" S = SiliconeCartridge 015 = 1.5 micron E = 118 O-Ring V = Viton
025 = 2.5 micron F = Flange* O = O-Ringless Seal045 = 4.5 micron M = 123 O-Rings** Option100 = 10 micron N = 116 Inner Housing Seal - 5 = SS Insert200 = 20 micron
* - F end mondification is compatible to fit in a PALL SealKleenTM Housing, **- M end modification is compatible to fit in a Millipore OptiSealTM HousingExample - A 3 pack of 2.5", 2.5 micorn filters with 116 Internal EPDM o-ring would be JDP025ASE3P
3P = 3pc/ pack (1.5" and 2.5")
S = 116 Internal O-Ring w/Locking Groove
Specifications (cont.)
Sterilization & AutoclavingThe filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 5 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or com-mon chemicals that are compatible with filter components.
Page 153
PureFlo® PTFE Mini Filter Cartridge (PTFE/PP Construction)
ZenPure Ze
nPur
e
Specification
Materials of Construction: Media: PTFE Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicon (Standard), EPDM, Buna N, TES, Fluroelastomer Sealing: Thermally welded
Nominal Dimensions: Lengths: 1.5 in (38mm), 2.5 in (75 mm), 5 in. (135 mm) Diameter: 2.2 in. (56 mm)
Effective Filtration Area: 0.70 ft2 (650 cm2) per 1.5" cartridge 1.35 ft2 (1250 cm2) per 2.5" cartridge 2.6 ft2 (2400 cm2) per 5.0" cartridge
Available Ratings: 0.1um to 10um (see Ordering Guide)
Operating Conditions: Maximum Forward Differential Pressure: 4.1 bar (60 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 2.0 bar (29 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics.
Applications Buffers and Media Fermentation Tanks Product Sterilization Venting Bio Bags Pharmaceuticals Vaccines Biologics Gas Filtration Scale up Processing Ink Jets Acids and Bases
Versatile Small Cartridge filter
PureFlo® PTFE mini filter cartridges are highly reten-tive, hydrophobic PTFE membrane filters that have been specially designed for critical applications. No adhesives, binders, or surfactants are used in the manufacturing process. All cartridges are rinsed with high-purity pyrogen-free water to reduce extractables and downtime.
The naturally hydrophobic PTFE membrane is ideally suited for filtering aggressive chemicals such as acids, bases, and solvents. In addition, the hydrophobic membrane provides superior flow and pressure drop characteristics per unit area for gas filtration and tank venting applications. All filter cartridges are 100% in-tegrity tested to ensure filter performance each and every time out of the package. We are currently offer-ing seven different PTFE pore sizes with eight different end modifications and three different length options to meet the needs of a wide variety of processes.
Retrofit for Mini Cartridge
Page 154
ZenPure PureFlo® PTFE Mini Filter Cartridge
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
D31 Rev 2011.08
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 1.5" PTFE Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
0.1 0.2 0.45
1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 5.0" PTFE Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
0.1
0.2
0.45
1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo 2.5" PTFE Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
0.1 0.2
0.45
1.0
Flange End Modification
PureFlo PTFE Mini Filter Cartridge Ordering Guide
PureFlo Mini PTFE Filter Cartridges Removal Rating End Modifications Length O-Ring / Gasket
Materials Package Qty
010 - 0.10 micron A = 116 Inner O-Ring H = 1.5" E = EPDM 2P = 2pc/ pack (5")MMF 020 - 0.20 micron C = 015 O-Ring S = 2.5" N = Buna N
045 - 0.45 micron D = 1/2" MNPT L = 5" S = Silicone100 - 1.0 micron E = 118 O-Rings U = TES300 - 3.0 micron F = Flange* V = Fluro-Elastomer Option500 - 5.0 micron M = 123 O-Rings** O = O-Ringless - 5 = SS Insert999 - 10 micron N = 116 Inner Housing Seal
Example - A 3 pack of 2.5", 0.1 micron filters with 2-015 EPDM o-ring would be MMF010CSE3P
3P = 3pc/ pack (1.5" and 2.5")
* - F end modification is compatible to fit in a PALL SealKleen TM Housing, **- M end modification is compatible to fit in a Millipore OptiSeal TM Housing
S = 116 Inner O-Ring with locking groove
Specifications (cont.)
Bacterial Retention (for 0.2um membrane): Complete retention of > 107organisms/cm2 of Brevundimonas diminuta inaccordance with the current HIMA challenge methodology (ASTM F838-83). Validation Guide upon request.
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 10 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pres-sure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components.
Bacterial Endotoxin: Effluent is non-pyrogenic per USP Bacterial Endotoxin (0.25 EU/ml), deter-mined using Limulus Amebocyte Lysate (LAL) Test.
Page 155
PureFlo® PTFE Mini Vent Filter Cartridge (PTFE/PP Construction)
ZenPure Ze
nPur
e
Applications
Buffers and Media Fermentation Tanks Product Sterilization Venting/ Exhaust
Cell Culture Pharmaceuticals Vaccines Biologics
Gas Filtration Sterile Air/Gas inlet
Versatile Small Cartridge filter
PureFlo® PTFE small vent filter cartridges are highly retentive, hydrophobic PTFE membrane filters that have been specially designed for criti-cal applications. The PTFE membrane in an all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane cartridges. No adhesives, binders, or surfactants are used in the manufacturing process. All cartridges are rinsed with high-purity pyrogen-free water to re-duce extractables and downtime.
The naturally hydrophobic PTFE membrane is ide-ally-suited for aggressive fumes from chemicals such as acids, bases, and solvents. The hydro-phobic membrane will provides superior flow and pressure drop characteristics per unit area for gas filtration and tank venting applications. All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package.
Specifications
Materials of Construction: Media: PTFE Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicon (Standard), EPDM, Buna N, TES, Fluoroelastomer Sealing: Thermally welded
Nominal Dimensions: Lengths: 2.28 in (58mm) Diameter: 1.54 in. (40 mm)
Effective Filtration Area: 0.46 ft2 (400 cm2) per cartridge Available Ratings: 0.2um
Operating Conditions: Maximum Forward Differential Pressure: 4.1 bar (60 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 2.0 bar (29 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with 21CFR Part 177 of the U.S. Code of Fed- eral Regulations and USP Class VI Biological Test for Plastics.
Page 156
ZenPure PureFlo® PTFE Small Vent Filter Cartridge
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
D31.5 Rev 2011.08
PureFlo PTFE Small Vent Filter Cartridge Ordering Guide
Specifications (cont.)
Bacterial Retention (for 0.2um membrane): Complete retention of > 107organisms/cm2 of Brevundimonas diminuta in accordance with the current HIMA challenge methodology (ASTM F838-83). Validation Guide upon request.
Sterilization & Autoclaving The MVF Series filter can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The MVF Series filter can also be sterilized by steam-in-place procedure up to 10 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The Both the MVF & MVE Series filters can also sanitized by hot water or common chemicals that are compatible with filter components.
Bacterial Endotoxin: Effluent is non-pyrogenic per USP Bacterial Endotoxin (0.25 EU/ml), determined using Limulus Amebocyte Lysate (LAL) Test
0
0.2
0.4
0.6
0.8
1
0
0.008
0.016
0.024
0.032
0.04
0.048
0.056
0.064
0 20 40 60 80 100
0 0.5 1 1.5 2 2.5 3 3.5
PureFlo PTFE Small Vent Filter
slpm
BarPSID
scfm
Diff
eren
tial
Pres
sure
Flow Rate @22°C, Nitrogen
0.2um
Filter Type and ConstructionRemoval
Rating (Micron)
Adaptors O-Ring Materials Standard Package Qty
E = EPDM020 = 0.2 C = 015 O-Ring N = Buna N 3P = 3pc/pack
S = SiliconeV = Fluro-Elastomer Option
- 5 = SS Insert
Note: MVF/MVE Cartridges (~400cm2 for MVF and ~300 for MVE)
MVF - PTFE with standard PP parts and PP support
MVE - PE with standard HPDE parts and PE support
Example - A 3 pack mini vent filter with PTFE 0.2 micron with 2-015 EPDM o-ring would be MVF020CE3P
Page 157
PureFlo® PE Mini Filter Cartridge (PE/HDPE Construction)
ZenPure Ze
nPur
e
Specification
Materials of Construction: Media: PE Media Supports: HDPE Cage, Core, End Caps: HDPE O-Rings: Silicon (Standard), EPDM, Buna N, TES, Fluoroelastomer Sealing: Thermally welded
Nominal Dimensions: Lengths: 1.5 in (38mm), 2.5 in (75 mm), 5 in. (135 mm) Diameter: 2.2 in. (56 mm)
Effective Filtration Area: 0.54 ft2 (500 cm2) per 1.5" cartridge 1.1 ft2 (1000 cm2) per 2.5" cartridge 2.0 ft2 (1900 cm2) per 5.0" cartridge
Available Ratings: 0.1um to 10um (see Ordering Guide)
Operating Conditions: Maximum Forward Differential Pressure: 4.1 bar (60 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 2.0 bar (29 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 158°F/70°C
Regulatory Compliance: The filters are constructed with HDPE resins and filtration media in compliance with 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics.
Applications Buffers and Media Fermentation Tanks Product Sterilization Venting Bio Bags Pharmaceuticals Vaccines Biologics Gas Filtration Scale up Processing Ink Jets Acids and Bases
Versatile Small Cartridge
PureFlo® PE mini filter cartridges are highly retentive, hydrophobic PE membrane filters that have been spe-cially designed for critical applications. The PE mem-brane in an HDPE construction provides excellent chemical compatibility and superior flow per unit area. No adhesives, binders, or surfactants are used in the manufacturing process. All cartridges are rinsed with high-purity pyrogen-free water to reduce extractables and downtime.
The PE membrane is ideally-suited for chemicals such as acids, bases, and solvents. In addition, the hydro-phobic membrane provides superior flow and pressure drop characteristics per unit area for gas filtration and tank venting applications. All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package. We are cur-rently offering four different PE pore sizes with eight different end modifications and three different length options to meet the needs of a wide variety of proc-esses.
Page 158
ZenPure PureFlo® PE Mini Filter Cartridge
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
D31.7 Rev 2011.08
Flange End Modification
PureFlo PE Mini Filter Cartridge Ordering Guide
Specifications (cont.)
Bacterial Retention (for 0.2um membrane): Complete retention of > 107organisms/cm2 of Brevundimonas diminuta in accordance with the current HIMA challenge methodology (ASTM F838-83). Validation Guide upon request.
Sanitizable: The filters can be gamma sterilized up to 45kGy. The filters can also be chemically sanitized in situ using common sanitizing agents or hot water at 90°C for a limited time (dependent on time and temperature). Not Autoclavable.
Bacterial Endotoxin: Effluent is non-pyrogenic per USP Bacterial Endotoxin (0.25 EU/ml), determined using Limulus Amebocyte Lysate (LAL) Test.
PureFlo Mini PE Filter Cartridges Removal Rating End Modifications Length O-Ring / Gasket
Materials Package Qty
020 = 0.20 micron A = 116 Inner O-Ring H = 1.5" E = EPDM 2P = 2pc/ pack (5")MME = Mini PE 100 = 1 micron C = 015 O-Ring S = 2.5" N = Buna N
Cartridge 150 = 1.5 micron D = 1/2" MNPT L = 5" S = Silicone250 = 2.5 micron E = 118 O-Rings U = TES
F = Flange* V = Fluro-ElastomerO = O-Ringless
N = 116 Inner Housing Seal
Example - A 3 pack of 2.5", 0.1 micorn filters with 2-116 EPDM o-ring would be MMS010ASE3P
3P = 3pc/ pack (1.5" and 2.5")
M = 123 O-Rings with hold down tabs**
S = 116 Inner O-Ring with locking groove
* - F end mondification is compatible to it in a PALL SealKleenTM Housing, **- M end modification is compatible to it in a Millipore OptiSealTM Housing
Page 159
PureFlo® Nylon Mini Filter Cartridges
ZenPure Ze
nPur
e
PureFlo® nylon mini filter cartridges are highly retentive, naturally hydrophilic nylon membrane filters that have been specially de-signed for critical applications. The nylon membrane in an all-polypropylene construction provides excellent chemical compatibil-ity and superior flow per unit area as compared to other membrane cartridges. No adhesives, binders, or surfactants are used in the manufacturing process and all cartridges are rinsed with high-purity water to reduce extractables and downtime.
The naturally hydrophilic nylon membrane does not require pre-wetting with IPA and flushing with DI water, thereby eliminating a potential source of contamination and hazardous waste. In addition, unlike hydrophobic membrane such as PTFE, the hydrophilic mem-brane of nylon reduces the potential for bubble formation by not de-wetting in out gassing fluids. All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package. PureFlo nylon mini filter cartridges are well-suited for criti-cal applications where superior flow and particle removal efficiency at 0.1, 0.2, 0.45, 0.65, and 1.0 micron is required.
Applications Acids Ink Jets
Bases Beverages
Solvents Pharmaceuticals
Fine Chemicals Biologics
Plating Solutions Dyes
Process Water Parts Cleaning
Materials of Construction Membrane: Naturally Hydrophilic Nylon Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicone, EPDM, Fluoroelastomer, Buna N
Dimensions (nominal) Lengths: 1.5 in (38mm),2.5 in (75 mm), 5 in. (135 mm) Diameter: 2.2 in. (56 mm)
Effective Filtration Area 0.78 ft2 (720 cm2) per 1.5" cartridge 1.3 ft2 (1380 cm2) per 2.5" cartridge 2.6 ft2 (2600 cm2) per 5.0" cartridge
Operating Conditions Maximum Forward Differential Pressure: 4.1 bar (60 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 2.0 bar (29 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 158°F/70°C
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 3 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components.
Features Benefits
■ Naturally Hydrophilic Nylon Membrane (Absolute Rated)
■ IPA pre-wetting not required – thereby eliminating a potential source of contamination and disposal waste
■ Reduces downtime and improves throughput ■ Economic alternative to PTFE and PVDF filters ■ No de-wetting in out gassing fluids
■ Wide Chemical & Thermal Compatibility
■ Provides excellent compatibility with a wide range of chemicals
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during manufac-turing resulting in superior downstream cleanliness
Retrofits Code 2230, 4463, 4440 & SLK
Regulatory Compliance Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological test for Plastic
Page 160
ZenPure PureFlo® Nylon Mini Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
D32 Rev 2011.08
PureFlo Nylon Mini Filter Cartridge Ordering Guide PureFlo Mini Nylon Filter Cartridges
Removal Rating End Modifications Length O-Ring / Gasket Materials Package Qty
010 = 0.10 micron A = 116 Inner O-Ring H = 1.5" E = EPDM 2P = 2pc/ pack (5")MMN = Mini Nylon 020 = 0.20 micron C = 015 O-Ring S = 2.5" N = Buna N
Cartridge 050 = 0.45 micron D = 1/2" MNPT L = 5" S = Silicone065 = 0.65 micron E = 118 O-Ring V = Fluro-Elastomer Option100 = 1.0 micron F = Flange* 0 = O-Ringless Seal - 5 = SS Insert
M = 123 O-Rings**N = 116 Inner Housing Seal
* - F end mondification is compatible to fit in a PALL SealKleenTM Housing, **- M end modification is compatible to fit in a Millipore OptiSealTM HousingExample - A 3 pack of 2.5", 0.1 micorn filters with 2-015 EPDM o-ring would be MMN010CSE3P
3P = 3pc/ pack (1.5" and 2.5")
S = 116 Inner O-Ring with locking groove
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2
0 1 2 3 4 5 6 7
PureFlo Mini Nylon (5") Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.10.2
0.450.65
1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2
0 1 2 3 4 5 6 7
PureFlo Mini Nylon (1.5") Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.10.2
0.45
0.65
1.0
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2
0 1 2 3 4 5 6 7
PureFlo Mini Nylon (2.5") Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pres
sure
Flow Rate @22°C, 1cP Fluid
0.10.2 0.45
0.65
1.0
Flange End Modification
Page 161
PureFlo® Charged Nylon Mini Filter Cartridge (Charged Nylon/PP Construction)
ZenPure Ze
nPur
e
Specification
Materials of Construction: Media: Charged Nylon 6,6 membrane (hydrophilic) Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicon (Standard), EPDM, Buna N, TES, Fluoroelastomer Sealing: Thermally welded
Nominal Dimensions: Lengths: 1.5 in (38mm), 2.5 in (75 mm), 5 in. (135 mm) Diameter: 2.2 in. (56 mm)
Effective Filtration Area: 0.77 ft2 (720 cm2) per 1.5" cartridge 1.48 ft2 (1380 cm2) per 2.5" cartridge 2.80 ft2 (2600 cm2) per 5.0" cartridge
Available Ratings: 0.1um, 0.2um, 0.45um, 0.65um and 1.0um
Operating Conditions: Maximum Forward Differential Pressure: 4.1 bar (60 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 2.0 bar (29 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80° C Maximum Operating Temperature: 176°F/80°C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with USP Class VI Biological Test for Plastics.
Retrofits Code 2230, 4463, 4440 & SLK
High Contaminant Removal
PureFlo® Charged Nylon cartridge filters are designed to remove particles smaller that its rated pore size with the power of electrical attraction (adsorption/adhesion). Many particles in water and other liquids have a negative charge that can be captured by at-traction to a positively charged filter. This combined with particle size exclusion (sieving) process and im-paction/ interception particle capture mechanism make this charged nylon filter extremely efficient. The PureFlo® Charged Nylon cartridges are naturally hydrophilic nylon membrane filters with a polyester support layer for added wetability of the membrane. The nylon membrane in an all-polypropylene construction provides excellent chemi-cal compatibility and superior flow per unit area as compared to other membrane cartridges. No adhe-sives, binders, or surfactants are used in the manu-facturing process and all cartridges are rinsed with high-purity water to reduce extractables and down-time. All filter cartridges are 100% integrity tested to ensure filter performance each and every time out of the package.
Applications DI Water UltraPure Water Critical Parts Cleaning
Endotoxin Reduction
Fine Chemicals Plating Solutions
Page 162
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas : ZenPure Americas, Inc. www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
ZenPure
D32.5 Rev 2011.08
PureFlo® Charged Nylon Mini Filter Cartridge
Flange End Modification
PureFlo Mini Cartridges Removal Rating End Modifications Length O-Ring / Gasket
Materials Package Qty
010 = 0.10 micron A = 116 Inner O-Ring H = 1.5" E = EPDM 2P = 2pc/ pack (5")020 = 0.20 micron C = 015 O-Ring S = 2.5" N = Buna N050 = 0.45 micron D = 1/2" MNPT L = 5" S = Silicone065 = 0.65 micron E = 118 O-Ring V = Fluro-Elastomer Option
100 = 1.0 micron F = Flange* 0 = O-Ringless Seal - 5 = SS InsertM = 123 O-Rings**N = 116 Inner Housing Seal
EMN = Mini Charged Nylon
Cartridge
3P = 3pc/ pack (1.5" and 2.5")
Example - A 3 pack of 2.5", 0.1 micorn filters with 2-015 EPDM o-ring would be EMN010CSE3P * - F end mondification is compatible to it in a PALL SealKleenTM Housing, **- M end modification is compatible to fit in a Millipore OptiSealTM Housing
S = 116 Inner O-Ring with locking groove
PureFlo Mini Filter Cartridge Series Sizes and End Configuration
PureFlo Charged Nylon Mini Filter Cartridge Ordering Guide
Specifications (cont.)
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 3 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or com-mon chemicals that are compatible with filter components.
Page 163
PureFlo® PES Mini Filter Cartridges
ZenPure Ze
nPur
e
PureFlo® PES mini filter cartridges are highly-retentive hydro-philic PES membrane filters that have been specially designed for critical applications. The PES membrane in an all-polypropylene construction provides excellent chemical compatibility and superior flow per unit area as compared to other membrane cartridges. No adhesives, binders or surfactants are used in the manufacturing process. All cartridges are rinsed with high-purity water to reduce extractables and downtime.
The hydrophilic PES membrane does not require prewetting with IPA and flushing with DI water, thereby eliminating a potential source of contamination and hazardous waste. In addition, unlike hydrophobic filters such as PTFE, hydrophilic membrane reduces the potential for bubble formation by not dewetting in outgassing fluids. All filter cartridges are 100% integrity tested to ensure filter perform-ance each and every time out of the package. PureFlo PES mini filter cartridges are well-suited for critical applications where superior flow and particle removal efficiency at 0.04, 0.1, 0.2, 0.45, 0.65, 0.80 and 1.2 micron is required.
Applications Acids Ink Jets
Bases Beverages
Solvents Pharmaceuticals
Fine Chemicals Biologics
Plating Solutions Dyes
Process Water Lacquers
Materials of Construction Membrane: Hydrophilic Polyethersulfone Membrane Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicone, EPDM, Fluoroelastomer, Buna N
Dimensions (nominal) Lengths: 1.5in (38mm), 2.5 in (75 mm), 5 in. (135 mm) Diameter: 2.2 in. (56 mm)
Effective Filtration Area 0.78 ft2 (720 cm2) per 1.5" cartridge 1.5 ft2 (1380 cm2) per 2.5" cartridge 2.8 ft2 (2600 cm2) per 5.0" cartridge
Operating Conditions Maximum Forward Differential Pressure: 4.1 bar (60 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 2.0 bar (29 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 10 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components.
Features Benefits ■ Hydrophilic PES Membrane ■ IPA pre-wetting not required – thereby eliminating a potential
source of contamination and disposal waste ■ Reduces downtime and improves throughput ■ Economic alternative to PTFE filters ■ No dewetting in outgassing fluids, unlike hydrophobic filters
such as PTFE
■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide-range of chemicals
■ Low Filter Extractables ■ No adhesives, binders, or surfactants are used during manufacturing resulting in superior downstream cleanliness
■ All cartridges are rinsed with high-purity water
Retrofits Code 2230, 4463, 4440 & SLK
Regulatory Compliance Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics
Page 164
ZenPure PureFlo® PES Mini Filter Cartridges
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
D33 Rev 2011.08
PureFlo PES Filter Cartridge Ordering Guide
PureFlo Mini PES Filter Cartridges Removal Rating End Modifications Length O-Ring / Gasket
Materials Package Qty Grade
004 = 0.04 micron A = 116 Inner O-Ring H = 1.5" E = EPDM 2P = 2pc/ pack (5") Blank = StandardMMS = Mini PES 010 = 0.10 micron C = 015 O-Ring S = 2.5" N = Buna N - PH = Pharm grade
Cartridge 020 = 0.20 micron D = 1/2" MNPT L = 5" S = Silicone050 = 0.45 micron E = 118 O-Rings V = Fluro-elastomer065 = 0.65 micron F = Flange* 0 = O-ringless Seal Option080 = 0.8 micron N = 116 Inner Housing Seal - 5 = SS Insert120 = 1.2 micron M = 123 O-Rings with hold
down tabs**
* - F end mondification is compatible to it in a PALL SealKleenTM Housing, **- M end modification is compatible to it in a Millipore OptiSealTM HousingExample - A 3 pack of 2.5", 0.1 micorn filters with 2-116 EPDM o-ring would be MMS010ASE3P
3P = 3pc/ pack (1.5" and 2.5")
S = 116 Inner O-Ring with locking groove
0
5
10
15
0
0.2
0.4
0.6
0.8
1
0 0.5 1 1.5 2 2.5 3
0 2 4 6 8 10
PureFlo Mini PES (1.5" - H) Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
0.65
0.04
0.10.2
0.45
1.20.8
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3 3.5 4
0 5 10 15
PureFlo Mini PES (2.5" - S) Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
0.65
0.040.1
0.2
0.45
1.20.8
0
2
4
6
8
10
0
0.08
0.16
0.24
0.32
0.4
0.48
0.56
0.64
0 0.5 1 1.5 2 2.5 3 3.5 4
0 5 10 15
PureFlo Mini PES (5" - L) Cartridge
GPM
BarPSID
LPM
Diff
eren
tial
Pre
ssur
e
Flow Rate @22°C, 1cP Fluid
0.65
0.04
0.1
0.2
0.45
1.20.8
Flange End Modification
Page 165
PureFlo® Glass Microfiber Mini Filter Cartridge (Glass Fiber/PP Construction)
ZenPure Ze
nPur
e
Specifications Materials of Construction: Media: Borosilicate Glass Microfiber Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: Silicon (Standard), EPDM, Buna N, TES, Fluoroelastomer Sealing: Thermally welded
Nominal Dimensions: Lengths: 1.5 in (38mm), 2.5 in (75 mm), 5 in. (135 mm) Diameter: 2.2 in. (56 mm)
Effective Filtration Area: 0.48 ft2 (450 cm2) per 1.5" cartridge 0.70 ft2 (950 cm2) per 2.5" cartridge 1.83 ft2 (1700 cm2) per 5.0" cartridge
Available Ratings: 0.45um to 30um (see Ordering Guide)
Operating Conditions: Maximum Forward Differential Pressure: 4.1 bar (60 psid) at 68°F/20°C 2.0 bar (29 psid) at 176°F/80°C Maximum Reverse Differential Pressure: 2.0 bar (29 psid) at 68°F/20°C 1.0 bar (14.5 psid) at 176°F/80°C Maximum Operating Temperature: 176°F/80°C
Regulatory Compliance: The filters are constructed with polypropylene resins and filtration media in compliance with USP Class VI Biological Test for Plastics.
Applications Buffers and Media Fermentation clarification Cell Harvesting Venting Pre-Filtration Pharmaceuticals Vaccines Biologics Gas Filtration Scale up Processing Ink Jets Acids and Bases
Versatile Small Cartridge Filter
PureFlo® Glass Microfiber mini filter cartridges are highly retentive filters that have been specially designed for critical high loading applications. The filter is made using a borosilicate microfiber in an all-polypropylene construction that provides excellent chemical compati-bility. The filter is designed for superior flow per surface area as compared to other cartridges. No adhesives, binders or surfactants are used in the filter manufactur-ing process. The borosilicate microfiber is a non-fiber releasing media.
The PureFlo® Glass Microfiber mini cartridge is ideally-suited for microbial reduction. In addition to the high loading capacity, they have low pressure drop charac-teristics for liquid and gas filtration applications. These microfiber mini filter cartridges are well-suited for applications where deformable and non-deformable particle removals are required.
We are currently offering eight different media sizes with five different end adaptors and three different length options to meet the needs of a wide variety of processes. The Glass fiber media can also be added as a pre-filter layer to membrane filter in a cartridge or cap-sule.
Retrofits Code 2230, 4463, 4440 & SLK
Page 166
ZenPure PureFlo® Glass Microfiber Mini Filter Cartridge
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
D34 Rev 2011.08
Flange End Modification
Specifications (cont.)
Sterilization & Autoclaving The filters can be sterilized by autoclaving for up to 25 cycles at 257°F/125°C. The filters can also be sterilized by steam-in-place procedure up to 10 cycles at 275°F/135°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or com-mon chemicals that are compatible with filter components.
PureFlo Glass Microfiber Mini Filter Cartridge Ordering Guide
PureFlo Mini Glass Microfiber Filter Cartridges
Removal Rating End Modifications Length O-Ring / Gasket Materials Package Qty
005 = 0.5um A = 116 Inner O-Ring H = 1.5" E = EPDM 2P = 2pc/ pack (5")NMG = Mini Glass 010 = 1.0um C = 015 O-Ring S = 2.5" N = Buna N
Microfiber 030 = 3.0um D = 1/2" MNPT L= 5" S = Silicone
Cartridge 050 = 5.0um E = 118 O-Ring V = Viton
100 = 10 um F = Flange* 0 = O-Ringless Seal Option200 = 20 um - 5 = SS Insert300 = 30 um
N = 116 Inner Housing Seal
M = 123 O-Rings with hold down tabs**
* - F end mondification is compatible to fit in a PALL SealKleenTM Housing, **- M end modification is compatible to fit in a Millipore OptiSealTM Housing
3P = 3pc/ pack (1.5" and 2.5")
Example - A 3 pack of 2.5", 3 micorn filters with 116 Internal EPDM o-ring would be NMG030ASE3P
S = 116 Inner O-Ring with locking groove
Page 167
MAXX Series Pleateed Filter Elements for Bag Filter Housings
ZenPure Ze
nPur
e
®
The MAXX series of pleated filter elements is to be the next generation of filter elements for bag filter housings. This product introduction offers the most comprehensive product offerings of inside-out flow elements available. MAXX ele-ments combine the proven ease of use and exceptional sol-ids loading capacity of bag filtration, with the high effi-ciency performance characteristics of cartridge filtration. All this results in the most versatile, reliable, and economi-cal filter in the marketplace today.
The MAXX series of filter elements come in five different filter media type to meet your high flow, high loading appli-cations.
MAXX filters multiplies the area of filtration that is possible to get in a #1 or #2 size bag filter housings. The filters allow you to utilize your existing bag filtration equipment to proc-ess more fluid at a lower pressure drop, thus saving you the time and expense to upgrade the capital equipment.
�� Polypropylene Micro-Fiber—PMF
�� Borosilicate Micro fiberglass—BMF
�� Polypropylene Felt—PPF
�� Polyester Felt—PEF
�� Phenolic Treated Polyester—PTP
Features Benefits ■ Absolute-Rated
■ Provides reliable pore size control resulting in repeatable filtration performance
■ Thermally bonded construction, eliminating bypass
■ Non-Fiber Releasing ■ Minimal extractables and particle release from filter, pro-viding a high purity filtrate
■ Quality Media ■ Low pressure drop yields higher flow and reduced processing time ■ Non-Calandard Micro-Glass matrix offering greater service life, reducing operating costs per cartridge
Applications
Industrial Membrane Prefiltration
Coatings Lubricating Oils
Food and Beverage Beer & Wine
Chemical Processing Photographic
Pharmaceuticals R.O. Prefiltration
Page 168
MAXX Series Pleateed Filter Elements for Bag Filter Housings
ZenPure Ze
nPur
e
®
MAXX Polypropylene Micro Fiber Ordering Guide
MAXX Polypropylene Micro Fiber Cartridges Removal Rating Length Oring Configuration O-Ring Materials Grade
005 = 0.5 micron P1 = Size 1 D1 = Single 261 oring E = EPDM Blank = IndustrialPMF 01 = 1.0 micron P2 = Size 2 D2 = Double 261 oring N = Buna N (standard) -1 = Beverage/FDA grade
03 = 3.0 micron V = Viton05 = 5.0 micron T = TEV10 = 10.0 micron25 = 25.0 micron50 = 50.0 micron
Example - MAXX Polypropylene, 1.0 micron, size #1, with single 261 Buna N o-ring, industrial grade would be PMF01P1D1N
Regulatory Compliance Manufactured from materials that conform to the require-ments of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Food and Beverage
Materials of Construction Media: Polypropylene Micro-Fiber Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene O-Rings: EPDM, Buna N, Viton, and TEV Sealing: Thermal Bond
Dimensions (nominal) Lengths: Size 1 (14”), Size 2 (28”) Diameter: 7 in. (178cm)
Effective Filtration Area Size 1 = 24 ft2 Size 2 = 50 ft2 Operating Conditions
Maximum Forward Differential Pressure: - Polypropylene support: 6.3 bar (90PSID) at 24°C (75°F)
Maximum Operating Temperature: - Polypropylene support: 93°C
MAXX Polypropylene Micro Fiber (PMF) filters are en-gineered for critical high-purity applications by optimiz-ing the media while maintaining absolute rated perform-ance that is both predictable and repeatable. Our unique filter media is constructed on the latest continuous Mi-cro−Fiber manufacturing equipment, accurately control-ling fiber diameter and web integrity. This state-of-the-art manufacturing method utilizes online monitoring equip-ment that delivers the industry’s most uniform and consis-tent media, resulting in unparalleled product consistency.
By combining this high performance media in a MAXX PMF filter element, we have created the ultimate filter ele-ment. This element combines the advantages of typical bag filtration, ease of use and exceptional dirt holding ca-pacity with the high efficiency and performance character-istics of cartridge filtration. The inside-out flow design ensures that unwanted contaminates stay inside the ele-ment during change-out unlike typical cartridge filtration. This virtually eliminates the possibility of downstream contamination.
Our 100% polypropylene construction provides an excel-lent range of chemical compatibility for your most de-manding applications.
D35.1 Rev. 2011.08 Page 169
MAXX Series Pleateed Filter Elements for Bag Filter Housings
ZenPure Ze
nPur
e
MAXX Borosilicate Micro Fiberglass Ordering Guide
MAXX Borosillicate MicroFiber Cartridges
Removal Rating Length Cage Design Oring Configuration O-Ring Materials Grade
005 = 0.5 micron P1 = Size 1 (14") B = Resin Bonded Felt D1 = Single 261 oring E = EPDM Blank = IndustrialBMF 01 = 1.0 micron P2 = Size 2 (26") C = Plastic PP D2 = Double 261 oring N = Buna N (standard) 1 = Bev erage/FDA grade
02 = 3.0 micron P2L = Size 2 (30") P = Ov er-the-top Sty le V = Fluorocarbon03 = 3.0 micron T = TEV06 = 6.0 micron S = Silicon10 = 10.0 micron15 = 15.0 micron
Ex ample - MAXX Borosillicate Micro iberglass, 1.0 micron, size #1, w ith single 261 Buna N o-ring, industrial grade w ould be BMF01P1D1N
Materials of Construction Media: Borosilicate Micro fiberglass Media Supports: Polyester Cage, Core, End Caps: Polypropylene O-Rings: EPDM, Buna N, Viton, and TEV Sealing: Thermal Bond
Dimensions (nominal) Lengths: Size 1 (14”), Size 2 (28”) Diameter: 7 in. (178cm)
Effective Filtration Area P1 Size = 24 ft2 P2 Size = 50 ft2
P2L Size = 55 ft2 Operating Conditions
Maximum Forward Differential Pressure: - Polyester support: 4.8bar(70PSID) at 24°C(75°F)
Maximum Operating Temperature: - Polyester support: 60°C
MAXX Borosilicate Micro Fiberglass (BMF) filter ele-ments are engineered for critical high-purity applications optimizing throughput while maintaining an absolute rated performance that is consistent and reliable. Our micro-glass filter elements features a media structure with high surface area and increased void volume. The media also has an optimized pore size geometry to minimize pressure drop. Precision media manufacturing of fine fibers results in a highly uniform matrix that optimizes element service life. This advanced fine fiber technology outperforms all competing micro−fiber technologies.
MAXX pleat design coupled with the micro-fiber offers greater surface area, ensuring longer service life thus re-duce operating cost. The media is non-fiber releasing with minimal extractables providing high-purity for these absolute-rated elements. The cartridges are thermally bonded eliminating any chance of bypass.
MAXX BMF cartridges are the preferred choice for filter-ing beverages such as beer and wine because they do not remove flavor enhancing proteins.
Regulatory Compliance Manufactured from materials that conform to the requirements of 21CFR of the U.S. Code of Federal Regulations and USP Class VI Biological test for Food and Beverage
®
D35.2 Rev. 2011.08 Page 170
MAXX Series Pleateed Filter Elements for Bag Filter Housings
ZenPure Ze
nPur
e
®
MAXX Polypropylene and Polyester Felt Ordering Guide MAXX Polypropylene and Polyester Felt Cartridges Removal Rating Length Oring Configuration O-Ring Materials Grade
01 = 1.0 micron P1 = Size 1 D1 = Single 261 oring E = EPDM Blank = IndustrialPPF = Polypropylene Felt 05 = 5.0 micron P2 = Size 2 D2 = Double 261 oring N = Buna N (standard)
PEF = Polyester Felt 10 = 10.0 micron V = Viton
25 = 25.0 micron T = TEV50 = 50.0 micron75 = 75.0 micron100 = 100.0 micron 200 = 200.0 micron
Example - MAXX Polyester Felt, 1.0 micron, size #1, with single 261 Buna N o-ring, industrial grade would be PEF01P1D1N
Materials of Construction Media: Polypropylene, Polyester Cage, Core, End Caps: Polypropylene O-Rings: EPDM, Buna N, Viton, and TEV Sealing: Thermal Bond
Dimensions (nominal) Lengths: Size 1 (14”), Size 2 (28”) Diameter: 7 in. (178cm)
Effective Filtration Area Size 1 = 10 ft2 Size 2 = 20 ft2 Operating Conditions
Maximum Forward Differential Pressure: - Polypropylene: 6.3 bar(90PSID) at 24°C(75°F) - Polyester: 4.8bar(70PSID) at 24°C(75°F)
Maximum Operating Temperature: - Polypropylene support: 93°C - Polyester: 60°C
MAXX Polypropylene and Polyester Felt (PPF and PEF) Elements feature the proven benefits of small fiber di-ameter and a high void area, creating the perfect depth filters. Available in either polypropylene or polyester, these elements offer five to ten times more surface area, depending upon the chosen configuration and materials of construction. Coupled with your choice of single or double o-ring seals, the result is the most reliable, and most versatile filters available.
The increased surface area offers higher flow capacity in existing applications. This boosts production without investing in capital equipment. The filters have dual den-sity with a built in pre-filter which prevents premature blinding of the final filter media. The pleats are held open with an internal pleat separator to enssure full utili-zation of the entire pleat surface area.
D35.3 Rev. 2011.08 Page 171
ZenPure MAXX Series Pleateed Filter Elements
for Bag Filter Housings
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
D35.4 Rev. 2011.08
MAXX Phenolic Treated Polyester Cartridges Removal Rating Length Oring Configuration O-Ring Materials Grade
01 = 1um Nom /5um Abs. P1 = Size 1 D1 = Single 261 oring E = EPDM Blank = IndustrialPTP = Polypropylene Felt 05 = 5um Nom /10um Abs. P2 = Size 2 D2 = Double 261 oring N = Buna N (standard)
10 = 10um Nom./25um Abs. V = Viton
25 = 25um Nom./50um Abs. T = TEV50 = 50um Nom./75um Abs.75 = 75um Nom./100um Abs.100 = 100um Nom./200um Abs. 200 = 200um Nom./200um Abs.
Example - MAXX Phenolic Treated Polyester, 1.0 micron, size #1, with single 261 Buna N o-ring, industrial grade would be PTP01P1D1N
Materials of Construction Media: Phenolic Treated Polyester Cage, Core, End Caps: Polypropylene O-Rings: EPDM, Buna N, Viton, and TEV Sealing: Thermal Bond
Dimensions (nominal) Lengths: Size 1 (14”), Size 2 (28”) Diameter: 7 in. (178cm)
Effective Filtration Area Size 1 = 10 ft2 Size 2 = 20 ft2
MAXX Phenolic Treated Polyester (PTP) combines the advantages of resin bonded cartridges and enhanced depth filtration with the proven inside-out flow advan-tages of bag filtration. This makes the MAXX PTP fil-ter the optimum alternative to cartridge filtration. The MAXX PTP utilizes a phenolic treated polyester with gradient density fiber material in a pleat design to cre-ate the non-compressible media filter. Our unique pat-ent-protected textile provides unsurpassed gel and par-ticle removal due to maximized surface area and the true depth design.
There is no fiber migration due to the utilization of pro-prietary textile which has lengthy heat set fibers. This eliminates post-filter fiber migration, which could re-sults in compromised product and a need to re-filter. The gradient density design, prevents premature blind-ing of final filtration layer. Thermally-bonded end caps eliminate bypass
The increased surface area in these pleated elements means longer filter life and reduced disposal cost. Longer filter life reduces labor time associated with change-outs. This allows for higher productivity due to longer run times. One size #1 element can replaces 40 10" equivalent resin bonded cartridges.
Phenolic Treaded Polyester Cartridge Ordering Guide
Page 172
ZenPure
This page left blank intentionally
ZenP
ure
Page 173
Hi-Pro Micro Felt Bag Filters
ZenPure Ze
nPur
e
®
Hi-Pro micro felt bag filters provide a full range of absolute rated filtration media to meet your exacting needs. All four editions of the Hi-Pro Micro (HPM) line incorporate a unique graduated layering of media, starting with a built-in pre-filter inner layer and progressing to the tighter outer lay-ers. The smaller particles are systematically removed as fluid travels through multiple layers with each individual layer performing a special function. This graduation aids in the prevention of premature blinding which causes unneces-sary filter change out.
The product line offerings include the Hi-Pro Micro 9200, Hi-Pro Micro 9500, and the ultimate in bag filtration the Hi-Pro Micro 9700 and 9900. The unrivaled Hi-Pro Micro line is the product suggested by US EPA for the most effective removal of Giardia and other zooflagellates. The product has the lowest standard deviation of any other filter, which means users achieve more consistent results from batch to batch. Equally important, this product presents the ultimate value in high-purity filtration.
Materials of Construction Polypropylene Felt
Bag Sizes 1, 2, and other upon request.
Micron Sizes 1,3.5, 5, 10, 25 microns
Finish Plain
Ring/ Flange option Stainless Steel
Operating Conditions Max differential pressure: 25 psid (5 Bar) Max Operating Temperature: Polypropylene Felt : 200ºF (93ºC)
Features Benefits ■ Three dimensional construction ■ Alternative for high particle level fluids
■ Longer life bag filter with greater flow rates ■ Low density and high permeability
■ Wide chemical & thermal compatibility ■ Provides excellent compatibility with a wide range of chemicals such as acids, bases and solvents
■ High quality products for almost every application
■ Complete line of bag filters ■ Wide selection of filtration media ■ Provides the most complete range of standard liquid filter
bags ■ Quality manufacturing ■ Consistent and reproducible particle removal
Page 174
ZenPure Hi-Pro Micro Felt Bag Filters
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
D35.5 Rev. 2011.07
Applications Acids Ink Jets Adhesives Electroplating Alcohols Esters Amines Greases and Oils Beverages Electronics Solvents Parts Cleaning Coating Products Inks Fine Chemicals Lacquers Water Machinery Cooling Paints Resins Plating Solutions Dyes
Hi-Pro Micro Felt Bag Filter Ordering Guide
Hi-Pro Micro Felt bag filters are designed to re-move heavy contamination in liquid fluid paths. These filters offer a perfect replacement for your particular application. Felt bag filters are offered in a large range of micron sizes. Filters can also be customized to meet your specific needs.
Material Efficiency Micron Size Bag Size Ring99 A =1.0 1 = 7" x 16" SS = Stainless Steel97 B =3.5 2 = 7" x 30.595 C =5.092 D =10
E =25
HPM = Hi-Pro Micro
Hi-ProMicro Felt Bag Filters
Example - a Hi Pro Micro Felt bag, 95%, 10um, size #2, with SS Ring would be HPM95D2SS
Page 175
Felt Bag Filters
ZenPure Ze
nPur
e
®
Felt bag filters fit a wide variety of applications and bag filter housings. The material’s three dimensional construction cre-ates a fabric with low density and high permeability. These features offer longer life bags with greater flow rates and in-creased dirt-holding capacity. Felt provides depth for greater particle retention and generally the best cost per gallon filter bag on the market. Felt is a versatile fabric available in several materials and numerous micron ratings.
Bag filters are designed to remove heavy contamination in liquid fluid paths. These filters offer a perfect replacement for your particular application. Felt bag filters are offered in a large range of micron sizes. Filters can also be customized to meet your specific needs.
Materials of Construction Polyester Felt Polypropylene Felt Viscose Felt Nylon Felt Nomex Felt Teflon Felt
Bag Sizes 1, 2, 3, 4, 7, 8, 9, 12, 30, 65, PH2, RP2, and other upon request.
Micron Sizes 0.5 to 200 microns
Finish Plain Singed One Side Cerex Cover Singed Both Sides Nylon Cover
Ring/ Flange options Draw String No Ring Plastic Flange Polypropylene Carbon Steel Stainless Steel
Operating Conditions Max differential pressure: 25 psid (5Bar) Max Operating Temperature: Nylon Felt: 300ºF (150ºC) Polyester Felt: 300ºF (150ºC) Polypropylene Felt : 200ºF (93ºC) Viscous Felt : 250ºF (120ºC) Nomex Felt : 400ºF (200ºC) Teflon Felt : 450ºF (230ºC)
Applications Acids Ink Jets Adhesives Electroplating Alcohols Esters Amines Greases and Oils Beverages Electronics Solvents Parts Cleaning Coating Products Inks Fine Chemicals Lacquers Water Machinery Cooling Paints Resins Plating Solutions Dyes
Features Benefits ■ Three dimensional construction ■ Economical alternative for high particle level fluids
■ Longer life bag filter with greater flow rates ■ Low density and high permeability
■ Wide chemical & thermal compatibility ■ Provides excellent compatibility with a wide range of chemicals such as acids, bases and solvents
■ High quality products for almost every application
■ Complete line of bag filters ■ Wide selection of filtration media ■ Provides the most complete range of standard liquid filter
bags ■ Quality manufacturing ■ Consistent and reproducible particle removal
Page 176
ZenPure Felt Bag Filters
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
d36 Rev. 2011.07
Felt Bag Filter Ordering Guide
Value Life bags combine unparalleled pleat integrity with our proprietary “Depth by Design”“Depth by Design” materials and construction gives EVP and MVP filters distinct per-formance, and economic, advantages versus com-mon pleated filter elements! Options
4T - 4 columns of vertical pleats to increase surface area (#3 and #4 bag only)
XL - double layered bag with an internal layer that captures large particles of dirt so the outer bag can last longer and filter the finer particles not caught by the inner bag
EVP - Enhanced life vertical pleats to increase surface area and life time (#1 and #2 bag only)
MVP - Maximum vertical pleat columns to increase surface area and lifetime more than 16 times over standard bag filters (#1 and #2 bag only)
MVP Pleated Bag filters
Value Life Pleat options
Test results from actual customer process
0
5
10
15
20
25
30
#2 Size Standard Bag Value-Life EVP Value-Life MVP
Surf
ace
Are
a (S
q-Ft
)
0
2
4
6
8
10
12
14
16
18
20"X
" Li
fe Im
prov
emet
Surface Area (Sq-Ft) Life Improvement
Material Finish Size Ring/ Flange OptionsPE PP V N NO T
PE = Polyester Felt 0.5 B = Singed Both Sides 1 = 7" x 16" S = Carbon Steel HS = Handle StrapPP = Polypropylene Felt 1 1 1 1 C = Cerex Cover 2 = 7" x 30.5 SS = Stainless Steel 4T = 4 Column Value LifeV = Viscose Felt 3 3 N = Nylon Cover 3 = 4" x 8" P = Plastic Flange XL = Extended LifeN = Nylon Felt 5 5 5 5 P = Plain 4 = 4" x 14" DS = Draw String EVP = Enhanced Life Verticle PleatNO = Nomex Felt 10 10 10 10 S = Singed One Side 7 = (612) 5.5" x 13" PR = Polypropylene MVP = Maximum Vertical PleatT = Teflon Felt 15 15 15 8 = (618) 5.5" x 19" N = No Ring
25 25 25 25 9 = (630) 5.5" x 31"50 50 50 50 12 = 8 37" x 32"75 75 30 =4.118" x10"100 100 100 100 65 = 4.118 x 22"150 PH2 = 7" x 32"200 200 200 RP2 = 8" x 27"
RP4 = 4" x 14"
Felt Bag FiltersRemoval Rating (Microns)
Example - a Polypropylene Felt bag 100um size #3 with a plastic flange and handle strap would be PP-100-P-3-P-HS
Special Request
Special Request
Page 177
Mono & Multifilament Mesh Bag Filters
ZenPure Ze
nPur
e
®
Mono and Multifilament mesh bag filters fit a wide-variety of applications and bag filter housings. Bag filters are normally used in industrial applications where there is a lot of heavy contamination in liquid fluid paths. The bags are offered in a range from 5 to 800 um.
Monofilament mesh bag filters are made of a single threaded material that is both strong and efficient. The threads are thicker and stronger than a multifilament, offer-ing a more exacting micron opening. Monofilament bags are reuseable. Multifilament mesh bags are constructed of multiple woven fibers that maximize bag strength at an eco-nomical cost.
Filters can be customized to meet your application.
Materials of Construction Nylon Monofilament Polyester Monofilament Polypropylene Monofilament Nylon Multifilament Polyester Multifilament
Bag Sizes 1, 2, 3, 4, 7, 8, 9, 12, 30, 65, PH2, RP2 and others upon request.
Micron Sizes 5 to 800 microns
Finish Plain
Ring/ Flange options Draw String No Ring Plastic Flange Polypropylene Carbon Steel Seal Rite Stainless Steel
Operating Conditions Max differential pressure: 25 psid (5Bar) Max Operating Temperature: Nylon Monofilament: 300ºF (150ºC) Polyester Monofilament: 300ºF (150ºC) Polypropylene Monofilament: 200ºF (93ºC) Nylon Multifilament: 300ºF (150ºC) Polyester Multifilament: 250ºF (120ºC)
Applications Acids Ink Jets Adhesives Electroplating Alcohols Esters Amines Greases and Oils Beverages Electronics Solvents Parts Cleaning Coating Products Inks Fine Chemicals Lacquers Water Machinery Cooling Paints Resins Plating Solutions Dyes
Features Benefits ■ Wide selection of micron sizes ■ Economical alternative for high particle level fluids
■ Provides the most complete range of standard liquid filter bags
■ Complete line of bag filters
■ Wide chemical & thermal compatibility ■ Provides excellent compatibility with a wide range of chemicals such as acids, bases and solvents
■ High quality products for almost every application
■ Complete line of bag filters ■ Wide selection of filtration media
■ Quality manufacturing ■ Consistent and reproducible particle removal
Page 178
ZenPure Mono & Multifilament Mesh Bag Filters
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-20012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
d37 Rev. 2011.07
Mono and Multifilament Mesh Bag Filter Ordering Guide
Ordering Instructions Material : This three or four letter code designates filtration media used to construct the
filtration product. Micron : Please check individual material for micron availability. Finish: Plain Size: This number indicates the filter bag size. Most bags fit into standard categories;
however, special sizes are available. Please refer to the price list for all sizes. Ring/ Flange: Description of the ring/ flange type to be used. Options: This item indicates a specific option choice. 4T - 4 columns of vertical pleats to increase surface area (#3 and #4 bag only) 8T - 8 columns of vertical pleats to increase surface area (#1 and #2 bag only) BT - narrow cloth tape used to fabricate a stronger seam HS - Handle Strap to make change-outs easier XL - double layered bag with a internal layer that captures large particles of dirt so the outer bag can last longer and filter the finer particles not caught by the inner bag
Material Finish Size Ring/ Flange Options NMO PEMO POMO NMU PEMUNMO = Nylon Mono 5 5 P = Plain 1 = 7" x 16" DS = Draw String 4T = 4 Column Value LifePEMO = Polyester Mono 10 10 2 = 7" x 30.5 N = No ring 8T = 8 Column Value lifePOMO = Polypro Mono 25 25 3 = 4" x 8" P = Plastic Flange BT = Bias TapeNMU = Nylon Multi 35 35 30 4 = 4" x 14" PR = Polypropylene HS = Handle StrapPEMU = Polyester Multi 50 50 50 7 = (612) 5.5" x 13" S = Carbon Steel XL = Extended Life
75 75 8 = (618) 5.5" x 19" SR = Seal Rite100 100 100 100 100 9 = (630) 5.5" x 31" SS = Stainless Steel125 125 125 12 = 8.37" x 32"150 150 150 150 150 30 =4.118" x10"200 200 200 200 200 65 = 4.118 x 22"250 250 250 250 PH2 = 7" x 32"300 300 300 300 300 RP2 = 8" x 27"400 400 400 400 400 RP4 = 4" x 14"600 600 600 600 600800 800 800 800 800
Removal Rating (Microns)Mono and Multifilament Mesh Bag Filters
Example - a Nylon Monofilament, 100um, size 3 bag, with a plastic flange and bias tape would be NMO-100-P-3-P-BT
Page 179
Chem Bag
ZenPure Ze
nPur
e
®
Chem Bags are designed for chemical purification and/or dissolving solid chemicals in a bag filter housing. This unique bag and filter combination allows for solid substances to come in contact with a dynamic liquid flow path. This will allow the solid contents in the Chem Bag to purify or add to the liquid stream as required.
The Chem Bag has an internal sidewall that is impervious to liquid. It is made out of high density polyethylene for chemical compatibility. The liner forces the liquid to pass through the entire column of solid substance. This allows for maximum contact time and does not allow the chemical to simply go around the bag like a normal bag filter would.
The clean effluent passes only through the bottom of the bag filtering and keeps the solid material contained. The top of the bag has a zipper so filling and change-outs are a easy, clean, and safe operation.
The Chem Bag could also be filled with more that one substance minimizing your need for additional housings. It could also be used for small test runs in lab scale experiments for proof of concept.
Materials of Construction Bag material Polyester Felt Polypropylene Felt Liner/side wall - High Density Polyethylene Zipper - Nylon teeth, Polyester cloth
Bag Sizes 1, 2, 3, 4, 7, 8, 9, 12, 30, 65, PH2, RP2, and other upon request.
Micron Sizes 0.5 to 200 microns
Finish Plain Singed One Side Singed Both Sides
Ring/ Flange Options Plastic Flange Polypropylene Carbon Steel Stainless Steel
Operating Conditions Max differential pressure: 25 psid (5Bar) Max Operating Temperature: 120ºF (50ºC)
Applications Acids Ink Jets Adhesives Electroplating Alcohols Esters Amines Greases and Oils Beverages Electronics Solvents Parts Cleaning Coating Products Inks Fine Chemicals Lacquers Water Machinery Cooling Paints Resins Plating Solutions Dyes
Features Benefits ■ Lined inner wall ■ Contact with the entire solid material column in the bag
■ Allows for multiple materials in the same bag to perform multiple process steps
■ Handle and zipper ■ Easy uses of filling and removing the bag. ■ Can easily dispose of entire bag with contents
■ Wide chemical & thermal compatibility ■ Provides excellent compatibility with a wide range of chemicals such as acids, bases, and solvents
■ High quality products for almost every application ■ Quality manufacturing ■ Consistent and reproducible particle removal Page 180
ZenPure Chem Bag
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
d38 Rev. 2011.07
Chem Bag Filter Ordering Guide
Ordering Instructions Material : The letter code designates filtration media used to construct the filtration product. Micron : Please check individual material for micron availability. Finish: Type of finish applied to the felt or the type of cover. Size: This number indicates the filter bag size. Most bags fit into standard categories;
however, special sizes are available. Please refer to the price list for all sizes. Ring/ Flange: Description of the ring/ flange type to be used. Chem Bag: This code designates Chem Bag
Chem Bag Specials with different material or options can be requested for quotation.
Specials can be quoted upon request
Material Finish Size Ring/ Flange Chem Bag PE PP PE = Polyester Felt 0.5 P = Plain 1 = 7" x 16" S = Carbon Steel CB = Chem BagPP = Polypropylene Felt 1 1 S = Singed One Side 2 = 7" x 30.5 SS = Stainless Steel
3 3 3 = 4" x 8" P = Plastic Flange5 5 4 = 4" x 14" PR = Polypropylene
10 10 7 = (612) 5.5" x 13" 15 8 = (618) 5.5" x 19"25 25 9 = (630) 5.5" x 31"50 50 12 = 8.37" x 32"75 75 30 =4.118" x10"100 100 65 = 4.118 x 22"150 PH2 = 7" x 32"200 200 RP2 = 8" x 27"
RP4 = 4" x 14"
Chem Bag FiltersMicrons
Example - a Polypropylene Felt bag, 100um, size #2, with a plastic flange PP-100-P-2-P-CB
Page 181
Resinator Bag Filter
ZenPure Ze
nPur
e
®
The Resinator combines the positive qualities of resin-bonded cartridges with the proven advantages of a premium quality bag filter. The users gain the non-compressibility of a resin filter along with the greatly enhanced solids loading capacity and cost savings of a gradient-density filter bag.
The Resinator’s patented design incorporates two layers of fully infused phenolic resin textile; with the inner layer act-ing as a pre-filter to the more retentive outer layer. This proven gradient density approach, coupled with the increased surface area, results in enhanced efficiencies and increased filter lifetime. The Resinator’s non-compressible depth me-dia is more effective than conventional filters in retaining gel-like particles. Unlike cartridges, which accumulate debris on the outside of the element and are prone to remnants falling off the element during change-out, the Resinator bag filter contains contaminates securely inside the bag. This not only ensures the integrity of the filtration process, it builds an ef-fective pre-filter cake that promotes higher efficiencies with-out higher pressure drop or loss of flow capacity.
Materials of Construction Bag Material - Double Layer Polyester Resin - Phenolic
Bag Sizes 1, 2, 3, 4, 7, 8, 9, 12, 30, 65 and others upon request.
Micron Sizes 1 to 200 microns
Finish Heat Treated Finish
Ring/ Flange Options Polypropylene Flange Carbon Steel 304 Stainless Steel
Operating Conditions Max differential pressure: 25 psid (1.7 bar) Max operating temperature: 300ºF (150ºC)
Features Benefits ■ High loading capability ■ Fewer change-outs, thus more up time in your process
■ Replaces 12 resin bonded cartridges, therefore lower disposal cost
■ Gradient density ■ Enhanced efficiencies and increased filter life ■ No fiber migration issues
■ Wide chemical & thermal compatibility ■ Provides excellent compatibility with a wide range of chemicals such as acids, bases and solvents
■ High quality products for almost every application ■ Bag handles ■ Easy, clean change-out
■ Cost savings on faster change-out time ■ Can easily dispose of entire bag with contents
Just one Resinator bag filter can replace 12 Resin-bonded cartridges
=
Page 182
ZenPure Resinator Bag Filter
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
d39 Rev. 2011.07
Resinator Bag Filter Ordering Guide
Specials can be quoted upon request
Note: The Resinator has not been tested for use in food, beverage, pharmaceutical, or potable water applications
Adhesives, Coatings, and Inks
Petroleum Products Resins Water-based Other
ApplicationsAdhesives Asphalts Acrylics Antifreeze Animal OilsEmulsions Machine Coolants Alkyds Cooling Tower Water CosmoleneEnamels Crude Oils Aminos Industrial Process Water ElastomersBox Inks Hydraulic Fluids Epoxies Oil Well Completion GlycerinLacquers Kerosene Silicones Solutions Inorganic
Paints Silicon Oils Urethanes Salt Water Acids (dilute)Sealants Waxes Vinyls PlasticizersShellac Rapeseed Oils
Varnishes TurpentineTung Oils
Typical Resinator Applications
Resinator Bag Filters Microns Finish Size Ring/ Flange1 P = Plain 1 = 7" x 16" S = Carbon Steel
BRB 5 N = Quick Release Cover 2 = 7" x 30.5 SS = Stainless Steel10 7 = (612) 5.5" x 13" P = Plastic Flange25 (Heat treated finish) 8 = (618) 5.5" x 19"50 9 = (630) 5.5" x 31"75 12 = 8.37" x 32"100200
Resinator Bag Filters
Example - a Resinator bag, 10um, size #2, Plain finish, with a plastic flange is BRB10P2P
Page 183
ZenPureStainless Steel Disc Holder
Zen
Pu
re
ZenPureYour Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company. Copyright 2003-2012 ZenPure or an affiliated company. All rights reserved.
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
A5 Rev 2011.06
The Stainless Steel disc holder can be used for simple, quick, and efficient filtration of fluids and gases used in laboratory, pilot, and small scale applications. The disk holder accepts the PureFlo Membrane discs which is the same filter media used in full size PureFlo cartridges and capsules. This will ensure consistent scale-up of the product through laboratory, pilot, and full-scale production.
The compact design allows for low hold-up volume to minimize wasted fluid. The locking ring provides quick turn-around of sampling and testing with no tools required. The disk holder is designed to minimize differential pressure. This ensures accurate testing and results of the filter media.
The disc holder can be used for clarification, compatibil-ity, sampling, particle counter testing and other small scale applications.
Disc Holder Closure Mechanism
Diameter Inlet Fittings Outlet Fittings Vent O-Ring
DH = Stainless P = Locking Ring 025 = 25mm All sizes All sizes E = EPDMSteel Disc Holder T = San tary Clamp 047 = 47mm 1N = 1/8" MNPT 1N = 1/8" MNPT S = SILICON
090 = 90mm 1Q = 1/8" Male Qu ck Coupling 1Q = 1/8" Male Quick Coupling 2C = 1/4" Compression V = Fluoro-elastamer142 = 142mm 2C = 1/4" Compression 2C = 1/4" Compress on LF = Female Luer lock
2H = 1/4" Hose Barb 2H = 1/4" Hose Barb NV = No Vent2N = 1/4" MNPT 2N = 1/4" MNPT2Q = 1/4" Male Qu ck Coupling 2Q = 1/4" Male Quick Coupling3N = 3/8" MNPT 3N = 3/8" MNPTLF = Female Luer lock LF = Female Luer lock
90 and 142 size only 90 and 142 size onlyMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp3T = 3/8" Weld Tube 3T = 3/8" Weld Tube 3H = 3/8" Hose Barb 3H = 3/8" Hose Barb Other fitting possible by reque Other fitting possible by request
1V = Valve w th 1/8" Hose Barb
Example - 47mm Stainless Steel Disk holder with 1/4" MNPT, no vent and EPDM oring - DHP0472N2NNVE
Stainless Steel Disc Holder Ordering Guide
Materials of ConstructionHead: 316L Stainless Steel Bowl: 316L Stainless Steel Screen: Sintered 316 Stainless Steel O-Rings: EPDM, Silicon , Fluoroelastomer
Dimensions (47mm version)Length: 2.75in (70mm) Width: 2.36in (60 mm)
ConnectionsInlet/Outlet : Compression, MNPT, and Hose Barb, Quick Coupling Vent: 1/4" Compression, Valve, Luer Lock or No vent
Finish Electropolished finish
Operating ConditionsMax operating pressure: 87 psi (6 Bar)
DHT version
DHP version
Page 184
ZenPure Stainless Steel Media Disc Holder
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
A5.1 Rev 2011.08
The Stainless Steel disc media holder can be used for simple, quick, and efficient filtration of fluids and gases used in laboratory, pilot, and small scale applications. The disk media holder accepts Media discs which from a size range from 0.1 to 5 mm. This will allow for testing of different media thickness variations as well as multiple layers.
The compact design allows for high hold-up volume to allow for filter caking and extended testing. The locking ring is the key to allow the different media thicknesses. It also allows for quick turn-around of sampling and testing with no tools required. The media holder is de-signed to minimize differential pressure thus ensuring accurate testing and results.
The media holder can be used for clarification, com-patibility, sampling, particle counter testing and other small scale applica-tions.
Disc Media Holder
Closure Mechanism
Diameter Void Chamber Height
Inlet Fittings Outlet Fittings Vent O-Ring
DM = Stainless P = Locking Ring 025 = 25mm All sizes All sizes NV = No Vent E = EPDM047 = 47mm 1N = 1/8" MNPT 1N = 1/8" MNPT S = SILICON060 = 60mm 1Q = 1/8" Male Quick Coupling 1Q = 1/8" Male Quick V = Fluoro-elastamer090 = 90mm 2C = 1/4" Compression 2C = 1/4" Compression142 = 142mm 2H = 1/4" Hose Barb 2H = 1/4" Hose Barb 2C = 1/4" Compression
2N = 1/4" MNPT 2N = 1/4" MNPT LF = Female Luer lock2Q = 1/4" Male Quick Coupling 2Q = 1/4" Male Quick 3N = 3/8" MNPT 3N = 3/8" MNPTLF = Female Luer lock LF = Female Luer lock
60mm and Larger 60mm and LargerMT = 1/2" Tri clamps MT = 1/2" Tri clampsTC = 1-1/2" Tri clamp TC = 1-1/2" Tri clamp3T = 3/8" Weld Tube 3T = 3/8" Weld Tube 3H = 3/8" Hose Barb 3H = 3/8" Hose Barb
Steel Disc Media Holder
Other fitting possible by request
1V = Valve with 1/8" Hose Barb
Example - 47mm Stainless Steel Disk Media Holder with 1/4" MNPT, no vent and EPDM O-ring - DMP0472N2NNVE
xxx = Specify Height in mm
Example: 127 = 127 mm
height (5")
Stainless Steel Disc Media Holder Ordering Guide
Materials of ConstructionHead: 316L Stainless Steel Bowl: 316L Stainless Steel Screen: Perforated 316 Stainless Steel O-Rings: EPDM, Silicon , Fluoroelast-
omer Dimensions (60mm version)
Length: 8.7in (221mm) Width: 3.5in (90 mm)
ConnectionsInlet/Outlet: Compression, MNPT,
and Hose Barb, Quick Coupling Vent: 1/4" Compression, Valve, Luer Lock
or No vent Finish
Electropolished finish Operating Conditions
Max operating pressure: 87 psi (6 Bar)
Page 185
Virgin Polypropylene Housing
ZenPure Ze
nPur
e
ZenPure virgin polypropylene housings have been specially designed for critical applications that require a high degree of cleanliness. No metal components are used in the construction of the housing, therefore, eliminating the potential for ionic or metallic contamination. In addition, the locking ring and housing threads are external to the housing (non-wetted surface) thereby reducing the potential for particles being generated as the surfaces are tightened or loosened.
ZenPure virgin polypropylene housings are offered in 10” or 20” lengths that accept filter cartridges with 2-222 O-rings. The compact design of the housings requires minimal installa-tion space while reducing hold-up volume. ZenPure virgin polypropylene housings can withstand high operating pres-sures and are an economic alternative to metal housings.
Applications Solvents Ink Jets Fine Chemicals Electronics Plating Solutions Pharmaceuticals Process Water Biologics Beverages Dyes Parts Cleaning Lacquers
Materials of Construction Head: Virgin Polypropylene Bowl: Virgin Polypropylene Locking Ring: Polypropylene Vent / Drain Plugs: Virgin Polypropylene O-Rings: Silicone, EPDM
Maximum Operating Pressure 100 psig (6.9Bar) @ 125°F (52° C) 125 psig (8.6 Bar) @ 68°F (20° C)
Lengths (Nominal): 10 in., 20 in. Inlet / Outlet Connections: 3/4” NPT, 1” NPT
Features Benefits
■ Small Compact Design ■ Low hold-up volume ■ Minimal installation space required
■ 100% Polypropylene Construction ■ Eliminates the potential for metallic or ionic contamination ■ Provides excellent compatibility with a wide-range of fluids ■ Economic alternative to metal housings
■ External Locking Ring ■ Provides a robust and consistent seal ■ Able to withstand high operating pressures ■ Reduces the potential for particles being generated as the
mating surfaces are being tightened or loosened
Page 186
ZenPure Virgin Polypropylene Housing
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
F59 Rev 2011.07
Virgin Polypropylene Ordering Guide
Filter
Nominal Length A B10" 165mm (6.5in") 354mm (13.9")20" 165mm (6.5in") 603mm (23.7")
Housing Construction
Material Configuration Cartridge Code
Housing Length
Vent / Drain Connections
Body Style
Inlet / Outlet Connections
O-Ring Materials
PH = Plastic Housing
V = Virgin PP
01 = 1 Round
0 = 2-222
10 = 10” 20 = 20”
P = ¼” FNPT
T = T Line
G = 3/4” FNPT * H = 1” FNPT **
E = EPDM S = Silicone
* 10” Length Only ** 20 “ Length Only
Example – 10”, Virgin Polypro Housing, with 2-222 EPDM O-Rings and 1” FNPT inlet and outlet connections would be PHV01010PTHE
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0
0.01
0.02
0.03
0.04
0.05
0 5 10 15 20
0 10 20 30 40 50 60 70
PureFlo Virgin PP Housing
GPM
BarPSID
LPMD
iffer
entia
l Pr
essu
re
Flow Rate @22°C, 1cP Fluid
10" Housing with 3/4" Fitting
20" Housing with 1" Fitting
Page 187
Sanitary Mini Stainless Steel Housing
ZenPure Ze
nPur
e
ZenPure® Sanitary Mini Stainless Steel housings are designed for high purity applications. All wetted surfaces are constructed of 316L stainless steel and are electropolished, providing excellent corrosion resistance. The housings are compatible with 1.5, 2.5 and 5 inch Mini Filters to meet the needs of your small scale appli-cation.
The housing can support the 116 o-ring size where the orings are on the filter (code A) or the housing (code N). The design of the housing provides for a positive seal with the filters thereby preventing fluid bypass. The housing is sealed by the use of an easy to use tri-clamp that requires no special tools to open or close.
These sanitary mini stainless steel housings are ideal for laboratory, small production or pilot scale operations. The ZenPure mini filters utilized with these housing can be scaled up to as large as 40" filter.
Materials of Construction Head: 316L Stainless Steel Bowl: 316L Stainless Steel Clamp: 304 Stainless Steal Center post with Seel plate: 316 Stainless Steel Vent/ Drain Plug: 316L Stainless Steel O-Rings: Silicone, EPDM, Viton
Dimensions (nominal) Filter Lengths: 1.5in., 2.5in., 5in. Width: 2.5in (64 mm)
Connections Inlet/ Outlet : ½", 1", 1.5" sanitary fitting Vent / Drain: welded valve, 1.4" FNPT, or no vent/drain
Finish Electropolished
Operating Conditions Max liquid operating pressure: 87 psi (6 bar)
Applications Solvents Ink Fine Chemicals Pilot Lab Applications Plating Solutions Pharmaceuticals Process Water Biologics Beverages Dyes Parts Cleaning Lacquers
Features Benefits ■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide range of
chemicals ■ The electropolished finish eliminates possible contamination
that could potentially leach into the process chemicals.
■ Three different sizes ■ Allows you to pick the amount of filtration area to minimize filtration cost and hold-up volume
■ Tri-clamp for housing ■ The housing allows for inspection of the filter before the housing is sealed
■ Ease of filter change-out
Page 188
ZenPure Sanitary Mini Stainless Steel Housing
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
G62 Rev 2011.07
Sanitary Stainless Steel Mini-Housing Ordering Guide
T– Style
With Vents
Without Vents With 1” Sanitary Fittings
Dimentions1.5" Filter 2.5" Filter 5" Filter
In-Line 159 193 243T-Line 159 189 241
Overall Length (L) mm
Actual length will vary with different fittings
In Line– Style
Housing Construction Material Cartridge #
Cartridge Code Length Vent/ Drain Body Style Inlet/Outlet
Gasket Materials
SM = Sanitary P = 316L 01 = 1 Round A = 116 01 = 1.5" T = T-LINE A = 1/2" TC, 1/2" Pipe E = EPDMMini-Housings 02 = 2.5" I = IN-LINE B = 1" TC, 1" Pipe S = SILICON
05 = 5" N = No V/D C = 3/4" TC, 19mm Pipe V = VITON F = 1/2" Butt weld pipe G = 1/4" NPT H = 3/8" Hose barb I = 3/8" FNPT
Example - 5" Sanitary T-line Mini SS housing with Silicon gaslet, no Vent for 116 oring filter with 1" TC connection - SMP01A05NTBS
N = 116 Inner Housing seal
V = Welded valves
P = 1/4" FNPT (for T-Line
Page 189
Sanitary Stainless Steel Housing
ZenPure Ze
nPur
e
ZenPure® sanitary stainless steel housings are designed for high-purity applications. All wetted surfaces are constructed of 316L stainless steel and are electropolished, there by providing excellent corrosion resistance. The housing comes in 5 inch to 30 inch sizes to meet the needs of your application.
The housing can support both Code 0 with 2-222 o-rings and Code F, double open-ended filters. The design of the housing provides for a positive seal with the filters, thereby preventing fluid bypass. The unique design for Code F filters allows for cost saving and ease of installation. The housing is sealed by the use of an easy to use tri-clamp that requires no special tools to open or close.
Materials of Construction Head: 316L Stainless Steel Bowl: 316L Stainless Steel Clamp: 304 Stainless Steel Center post with Seal plate: 316 Stainless Steal Vent/ Drain Plug: 316L Stainless Steel O-Rings: Silicone, EPDM
Dimensions (nominal) Lengths: 5 in., 10 in., 20 in., 30 in. Width: 5.51 in. (140mm)
Connections Inlet/ Outlet : ½", 1", 1.5" sanitary fitting Vent / Drain :½" sanitary, or welded valve
Finish Electropolished
Operating Conditions Max operating pressure: 145 psi (10Bar)
Features Benefits ■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide range of
chemicals ■ The electropolished finish eliminates possible contamination
that could potentially leach into the process chemical.
■ Mounting ■ T-line housing can be supported by tripod legs, rigid tubing, or wall-mounted bracket
■ Tri-Clamp ■ The housing allows for inspection of the filter before the housing is sealed.
■ Ease of filter change-out
Applications Solvents Ink Jets Fine Chemicals Electronics Plating Solutions Pharmaceuticals Process Water Biologics Beverages Dyes Parts Cleaning Lacquers
Page 190
ZenPure Sanitary Stainless Steel Housing
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
G63 Rev 2011.07
Item Description Material Size1 Bowl 316L SS 5,10,20,30"2 Tri-Clamp 304 SS 4"
3 O-ringEPDM/ Silicon/
Viton/ PTFE 4"4 Base 316L SS 1/2", 1", 1.5" 5 Valve 316L SS
Nominal Length L (T-Line) L1 (In-Line) L2 (In-Line) W (In-Line)5" 182mm (7.16") 226mm (8.9") 238mm (9.37") 135mm (5.31")10" 343mm (13.5") 387mm (15.24") 399mm (15.7") 135mm (5.31")20" 597mm (23.5") 641mm (25.24") 653mm (25.7") 135mm (5.31")30" 838mm (33.0") 895mm (35.24") 907mm (35.7") 135mm (5.31")
Housing Construction Material Cartridge #
Cartridge Code Length Vent/ Drain Body Style Inlet/Outlet
Gasket Materials
SH = Sanitary P = 316L 01 = 1 Round 0 = 2-222 05 = 5" A = ½" TC T = T-Line A = 1/2" TC E = EPDM
Housings 7 = 2-226 10 = 10" V = Welded I = In-Line B = 1" TC S = Silicone
20 = 20" valves C = 1.5" TC V = Viton
30 = 30" F = PTFE
40 = 40"Example - 10" Sanitary T-line SS housing with Silicon gaslet for Code 0 filter with 1" TC connection - SHP01010ATBS
Sanitary Stainless Steel Housing Ordering Guide
1
2
3
4
5
101 6 ±2
211
L
238
110
L2
L1
W
1 5” TC
1 5” TC
Page 191
ZenPure Sanitary SS Filter Housing Multi-Round
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
G64 Rev 2011.07
®
ConstructionNumber of
F iltersConfiguration Length
Cartridge Code
Inlet/Outlet F itting Size
Inlet/Outlet F itting Style
Vent/DrainGasket
MaterialInterior/Exterior
F inish1 = 1 Filter II = In-Line 11=10" 77 = 2-226 11 = 1" TTC = Tri Clamp TTC = 1/2" Tri Clamp EE = EPDM EEP = Electropolish
SAN = Sanitary 33 = 3 Filters TT = T-line 22=20" 88 = 2-222 22 = 2" VV = 1/4" Valve VV = VitonHigh Purity 5 = 5 Filters 33=30" SS = Silicon
6 = 6 Filters 44=40"7 = 7 Filters12 = 12 Filters
Example - 30"- 3 round for 222 filter, T-line, 2" Tri Clamp I/O, 1/2" Tri Clamp V/D, EPDM Gasket and Electropolished is SSAN3T382TCTCEEP
The Sanitary Stainless Steel filter housings are constructed of electropolished 316L stainless steel for excellent resis-tance to corrosive chemicals and product purity. These housings are typically used in the Pharmaceutical industry.
The housing is compatible with 10" to 40" filters elements to meet the needs of your application. The housing can sup-port 222 and 226 style filters. Housings from 1 to 12 rounds are available to fit your flow rate. T-line and in-line configu-rations allow flexibility in piping options.
The design of the housing provides for a positive seal with the filters, thereby preventing fluid bypass. The unique de-sign for closure with fixed bolts and opti-clamp hold down, ensure maximum strength and ease of operation. The hous-ing has a removable separator plate with a double o-ring seal that allows for complete disassembly for cleaning.
Customization of the housing is available.
Materials of Construction Head: 316L Stainless Steel Bowl: 316L Stainless Steel Clamp: 304 Stainless Steel Vent/Drain Plug: 316L Stainless Steel O-Rings: Silicone, Viton or EPDM
Dimensions (nominal) Lengths (in): 10 , 20, 30 and 40
Connections Inlet/ Outlet : Tri Clamp Vent / Drain : Tri Clamp, Valve
Finish Electropolished, <20Ra
Operating Conditions Max operating pressure: 125 psi (10Bar) at 200°F (93°C) Test Pressure : 165psi (11.4 Bar)at 75°F (24°C)
Applications Acids Plating Solutions Bases Electronics Solvents Pharmaceuticals Fine Chemicals Biologics
Sanitary Filter Housing Ordering Guide
Note - Not all options are available on all sizes of housings. See cut sheets for more detail
Page 192
Industrial Stainless Steel Housing Single Round
ZenPure Ze
nPur
e
ZenPure® industrial stainless steel housings are designed to meet your critical high-purity chemical processing needs. The housing is constructed of 316L stainless steel for excellent resistance to corrosive chemicals. The housing is compatible with 5 inch to 30 inch filters lengths to meet the needs of your application.
Code U housings can support both Code 0 with 222 o-rings and Code F, double open-ended filters. The unique design of the Code U housing allows for cost saving and ease of installation. You can engage DOE filter before closing the housing to ensure they are properly sealed. The design of the housing provides for a positive seal with the filters thereby preventing fluid bypass. The housing is sealed by the use of an easy to use tri-clamp that requires no special tools to open or close.
Materials of Construction Head: 316L Stainless Steel Bowl: 316L Stainless Steel Clamp: 304 Stainless Steel Center Post with Seal Plate: 316L SS Vent/Drain Plug: 316L Stainless Steel O-Rings: Silicone or EPDM
Dimensions (nominal) Lengths (in): 5 , 10 , 20, and 30 Width: 5.51 in. (140mm)
Connections Inlet/ Outlet : ¾" or 1" Vent / Drain : ¼" NPT, ¼" BSP
Finish Electropolished
Operating Conditions Max operating pressure: 145 psi (10Bar)
Applications Solvents Ink Jets Fine Chemicals Electronics Plating Solutions Pharmaceuticals Process Water Biologics Beverages Dyes Parts Cleaning Lacquers
Features Benefits ■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide range of
chemicals ■ The electropolished finish eliminates possible contamination
that could potentially leach into the process chemicals
■ Tri-Clamp ■ The housing allows for inspection of the filter before the housing is sealed
■ Ease of filter change-out
■ Universal Housing ■ Allows the user to change between filters with 222 o-rings and double open-ended in the same housing.
Page 193
ZenPure Industrial Stainless Steel Housing
Single Round
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
G65 Rev 2011.07
Nominal Length H1 (Bowl Height) H (Overall Height)5" 167mm (6.57") 246mm (9.69")10" 300mm (11.81") 379mm (14.92")20" 550mm (21.65") 629mm (24.76")30" 800mm (31.5") 879mm (34.6")
Item Description Material Size1 Base 316L SS 3/4 or 1"2 Bowl 316L SS 5,10,20,30"3 Tri-Clamp 304 SS4 O-ring EPDM/Silicon 110x3.15 Plug 316L SS 1/4" NPT
Industrial Stainless Steel Housing Ordering Guide
Housing Construction
Material Cartridge # Cartridge Code
Length VENT/ DRAIN BODY STYLE INLET/OUTLET O-Ring Materials
IH = Industrial P = 316L 01 = 1 Round 0 = 2-222 05 = 5" P = 1/4" FNPT T = T-LINE G = 3/4" FNPT E = EPDMHousings F = DOE 10 = 10" (plugs included) H = 1" FNPT S = Silicone
U = Universal 20 = 20" Q = 1/4" BSP J = 3/4" BSP(DOE & 222) 30 = 30" K = 1" BSP
Example - 10" Industrial SS housing with silicon o-ring for 222 filter with 3/4" FNPT connection - IHP01010PTGS
Page 194
ZenPure Industrial High Purity SS Filter Housing
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
G67 Rev 2011.07
®
ConstructionNumber of
F iltersConfiguration Length
Cartridge Code
Inlet/Outlet F itting size
Inlet/Outlet F itting Style
Vent/DrainGasket
MaterialInterior/Exterior F inish
1 = 1 Filter IIN = In-Line 11=10" 11 = DOE 11.5 = 1.5" TTC = Tri-Clamp 11/4TC = 1/4" Tri-Clamp EE = EPDM BBBP = Bead Blast & PassivateIHP = Industrial 33 = 3 Filters MM = T-line Machined 22=20" 22 = Cup and Post 33/4 = 3/4" FF = Flange 11/4N = 1/4" FNPT VV = Viton EEP = Electropolish
High Purity 5 = 5 Filters TTB = T-line, Bottom Open 33=30" 77 = 2-226 11 = 1" NN = FNPT 11/2TC = 1/2" Tri-Clamp SS = Silicon 6 = 6 Filters TTT = T-line, Top Open 44=40" 88 = 2-222 22 = 2" 11/2N = 1/2" FNPT7 = 7 Filters OOT= Offset, Top Open 33 = 3"12 = 12 Filters 44 = 4"21 = 21 Filters22 = 22 Filters26 = 26 FiltersExample - 30"- 12 round for 222 filter, T-line with top opening, 3" Flange, 1/2" Tri Clamp, EPDM Gasket and Electropolished is IIHP12TT383F1/2TCEEP
The industrial high purity stainless steel cartridge filter housings are designed to meet your critical high purity chemical processing needs. These housings are com-monly used in the food and beverage industries. The housing is constructed of 316L stainless steel for excel-lent resistance to corrosive chemicals. The housing is compatible with 10" to 40" filter elements to meet the needs of your application flow.
The housing can support 222 and 226 o-rings and Code F, double open-ended filters. A complete line of hous-ings from 1 to 26 round are available to fit any flow rate. The design of the housing provides for a positive seal with the filters, thereby preventing fluid bypass.
T-line and offset configurations allow flexibility in pip-ing options. The housing has an unique closure with fixed bolts and opti-clamp hold downs that ensure maxi-mum strength and ease of operation.
Materials of Construction Head: 316L Stainless Steel Bowl: 316L Stainless Steel Clamp: 304 Stainless Steel Center Post with Seal plate: 316L SS Vent/ Drain Plug: 316L Stainless Steel O-Rings: Silicone, Viton or EPDM
Dimensions (nominal) Lengths (in): 10 , 20, 30 and 40
Connections Inlet/ Outlet : Tri-Clamp, Flange, FNPT Vent / Drain : Tri-Clamp, FNPT
Finish Exterior: Electropolished, Bead Blast Interior: Electropolished, Bead Blast
Operating Conditions Max operating pressure: 125 psi (10 bar) @200°F (93°C) Test Pressure : 165psi (11.4 Bar)@75°F (24°C)
Applications Acids Ink Jets Bases Electronics Solvents Pharmaceuticals Fine Chemicals Biologics Plating Solutions Dyes Parts Cleaning Lacquers
Industrial High Purity Filter Housing Ordering Guide
Note- Not all options are available on all sizes of housings. See cut sheets for more detail.
Multi-Round
Page 195
ZenPure Industrial Economy Filter Housing Multi-Round
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
G68 Rev 2011.07
®
ConstructionNumber
of F iltersLength
Cartridge Code
Inlet/Outlet F itting Size
Inlet/Outlet F itting Style
Vent/DrainGasket
MaterialInterior/Exterior F inish
3 = 3 Filters 11=10" 11 = DOE 11.5 = 1.5" TTC = Tri-Clamp TTC = 1/2" Tri-Clamp EE = EPDM BBBP = Bead Blast & PassivateIE = Industrial 55 = 5 Filters 22=20" 22 = Cup and Post 22 = 2" FF = Flange NN = 1/2" FNPT EEP = Electropolish
Economy 6 = 6 Filters 33=30" 77 = 2-226 NN = FNPT VV = 1/4" Valve 7 = 7 Filters 44=40" 88 = 2-222
Example - 30"- 3 round for 222 filter, 2" Tri-Clamp I/O, 1/2" Tri-Clamp V/D, EPDM Gasket and Electropolished is IIE3382TCTCEEP
The industrial economy stainless steel filter housings are constructed of 316L stainless steel for excellent resistance to corrosive chemicals and to ensure product purity. The housing is compatible with 10" to 40" filters elements to meet the needs of your application.
The housing can support 222 and 226 o-rings and Code F, double open-ended filters. A line of housings from 1 to 7 rounds are available to fit your flow rate needs. The unique design for Code F filters allows for cost saving and ease of installation.
The offset configurations allows rapid pluming installa-tion. The design of the housing provides for a positive seal with the filters, thereby preventing fluid bypass. The unique design for closure with fixed bolts and opti-clamp hold down to ensure maximum strength and ease of op-eration.
Customization of the housing is available.
Materials of Construction Head: 316L Stainless Steel Bowl: 316L Stainless Steel Clamp: 304 Stainless Steel Center Post with Seal plate: 316L SS Vent/Drain Plug: 316L Stainless Steel O-Rings: Silicone, Viton or EPDM
Dimensions (nominal) Lengths (in): 10 , 20, 30 and 40
Connections - Offset Inlet/Outlet : Tri Clamp, Flange, FNPT Vent/Drain : Tri Clamp, FNPT, Valve
Finish Interior/Exterior: Bead Blast, Electropolished
Operating Conditions Max operating pressure: 125 psi (10bar) at 200°F (93°C) Test Pressure : 165psi (11.4 bar) at 75°F (24°C)
Applications Acids Ink Jets Bases Electronics Solvents Parts Cleaning Fine Chemicals Lacquers Plating Solutions Dyes
Industrial Economy Filter Housing Ordering Guide
Note- Not all options are available on all sizes of housings. See cut sheets for more detail.
Page 196
ZenPure Band Clamp SS Filter Housing Multi-Round
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
G68.5 Rev 2011.07
®
ConstructionNumber of
F iltersLength
Inlet/Outlet F itting Size
Inlet/Outlet F itting Style
Outlet Configurations
Material of Construction
Pressure Rating
Interior / Ex terior F inish
4 = 4 Filters 11=10" 22 = 2" FF = RF Flange 44 = 304SS PPC = Poly-Coat5 = 5 Filters 22=20" 33 = 3" MM = MNPT 66 = 316SS7 = 7 Filters 33=30" 44 = 4" TTC = Tri-Clamp 12 = 12 Filters 44=40"22 = 22 FiltersExample - 30"- 4 round , 2" Tri-Clamp I/O, Opposite Side Outlet, 304SS, Buna N Gasket is GGTCHB432TC2415PC
GTCHB = Band Clamp SS Filter Housing
2 = Opposite Side Outlet
15 = 150 PSI @ 250 F
Band Clamp Filter Housing Vessels are designed for industrial and commercial applications. Vessels are constructed of 304 or 316 stainless steel and accept DOE, 222/FLAT, and 222/FIN end cartridges in 10”, 20”, 30” & 40” nominal lengths.
Materials of Construction Housing: 316/ 304 Stainless Steel Clamp: 304 Stainless Steel Cap Spring: 316L SS O-Rings: Buna N
Dimensions (nominal) Lengths (in): 10 , 20, 30 and 40
Connections - Offset Inlet/Outlet : Tri Clamp, Flange, FNPT Vent/Drain : FNPT
Finish Interior: 2B finish Exterior: PolyCoat
Operating Conditions Max operating pressure: 150 psi (10bar)
Note- Not all options are available on all sizes of housings
Features: • Single o-ring design (Buna-N standard) • Easy-access self-centering heavy-duty band-clamp closure • 316 stainless steel universal seal cups and compression plates allow vessels to accept D OE , -222/FLAT, or -222/FIN-end cartridges • 304 & 316 stainless steel construction • Poly-coat finish (exterior only) • 150 PSI pressure rating • Heavy-duty welded mounting/support legs • 316 stainless steel cap/spring assemblies and v-posts
Heavy - Duty Band Clamp
Vent
Fin or flat - End Cartridge DOE Cartridge
Guage Port
Drain Port (dirty)
D r a i n P o r t (Clean)
Inlet
Outlet
Band Clamp Filter Housing Ordering Guide
Page 197
Industrial High Purity Bag Filter Housing
ZenPure Ze
nPur
e
®
The industrial high-purity stainless steel bag filter housings are designed to meet your critical high purity chemical proc-essing needs. These housings are commonly used for indus-trial applications where gross contamination is a concern. The housing is constructed of 316L stainless steel for excel-lent resistance to corrosive chemicals. The housing is com-patible with number 2 bag filters to meet the needs of your application flow.
The offset configurations allows rapid pluming installation. The design of the housing provides for a positive seal with the filters, thereby preventing fluid bypass. The unique de-sign for closure with fixed bolts and opti-clamp hold down to ensure maximum strength and ease of operation.
Customization of the housing is available.
Materials of Construction Head: 316L Stainless Steel Bowl: 316L Stainless Steel Clamp: 304 Stainless Steel Vent/ Drain Plug: 316L Stainless Steel O-Rings: Silicone, Viton or EPDM
Dimensions (nominal) Lengths (in): ~46" Ref for Bag #2
Connections Inlet/ Outlet : Tri-Clamp, Flange Vent / Drain : Tri-Clamp, FNPT
Finish Exterior: Electropolished, Bead Blast Interior: Electropolished, Bead Blast
Operating Conditions Max operating pressure: 125 psi (10 bar) at 200°F (93°C) Test Pressure : 165psi (11.4 Bar) at 75°F (24°C)
Applications Acids Ink Jets Bases Electronics Solvents Pharmaceuticals Fine Chemicals Biologics Plating Solutions Dyes Parts Cleaning Lacquers
Features Benefits ■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide range of
chemicals ■ The electropolished finish eliminates possible contamination
that could potentially leach into the process chemicals
■ Omega Ring ■ Provides easy removal of the bag and it’s captured particulate matter
■ Security to hold the bag in place, preventing any dislodging of the filter bag from any back pressure
Page 198
ZenPure Industrial High Purity Bag Filter Housing
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
G69 Rev 2011.07
Industrial High Purity Bag Filter Housing Ordering Guide
39.00"
5.50"
3.50"
VENT
OMEGA RING
#2 BAG FILTER
OUTLET
O-RING SEAL
O-RING SEAL
DRAIN
INLET
10"Ø BOLT CIRCLE
46.00" REF
BOTTOM VIEW
FRONT
Typical Water Flow Rate Vs. PSID
0
2
4
6
8
10
0 25 50 75 100
GPM
PSID
Construction Bag #Inlet/Outlet F itting size
Inlet/Outlet F itting Style
Vent/DrainGasket
MaterialInterior/Exterior F inish
IHPB = Industrial 22 = Number 2 22 = 2" TTC = Tri-Clamp 11/2TC = 1/2" Tri-Clamp EE = EPDM BBBP = Bead Blast & PassivateHigh Purity N = FNPT 11/2N = 1/2" FNPT VV = Viton EEP = Electropolish
Bag Housing S = Silicon
Example - #2 Bag filter housing with Tri-Clamp fittings and 1/2" Tri-Clamp Vent/Drain, EPDM Gasket and Electropolished is IIHPB22TC1/2TCEEP
Note: Dimensions are for reference only. Design drawings available upon request.
Page 199
ZenPure SRL Series Bag Housings
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
H70 Rev 2011.07
®
SRL Low flow Series vessels come in two standard sizes tailored to your throughput requirements. The SRL 1-30 is rated for 30 gpm, and the SRL 1-65 at 65 gpm. Both sizes are available in three different closure designs: Band Clamp, Swing Bolt, or Swing Away. Available with 100, 200, or 300 psi ratings.
Materials of Construction Head: 316,304, Carbon Steel Bowl: 316,304, Carbon Steel O-Rings: Silicone, Viton or EPDM (standard)
Orientation Side-in/ Bottom-out (Standard) Side-in/ Side-out (optional)
Connections Inlet/Outlet : FNPT, Tri-Clamp
Maximum Recommended Flow Rates and Surface Area For the following recommended flow rates, vessels need a minimum inlet/outlet size of 1" NPT. The recommended flow for basket and filter combina-tion is for nominally rated filter bags, not for our high efficiency filter bag
SRL Bag Filter Housing Ordering Guide
SRL 1-30 60 gpm 45 gpm 30 gpmSRL 1-65 125 gpm 90 gpm 65 gpm
ProductBasket Strainer
Mesh Lined Basket Strainer
Retainer Basket with Filter Bag
Optional Features
• Inlet/outlet orientation: Side-in Bottom-out (Standard) or Side-in Side-out (optional)
• Epoxy coating, electopolish and fuse coating
• Low pressure drop, positive cover seal
• Higher pressure ratings available up to 3,000 PSI
• Easily cleaned • Jacketing
• Heavy duty perforated basket • Compression devices
• ASME code stamp available on all designs
• Custom designs
• Band clamp and swing bolt closures
• Sanitary construction
• .25" NPT vent tap • Mesh-lined basket for straining applications - 50 micron and higher
• Pop sizes from .5" to 2" NPT, RFF or Quick Disconnect connections
• Greater surface area than our competitors' equivalent models
Standard Features
Housing Construction Bag Size
Inlet/Outlet Size (inch)
Inlet/Outlet Fitting Style Material Closure Mechanism Other Options
30 = 4"x10" 0.5 Blank = FNPT A = Carbon Steel BC100 = Band Clamp 100psi CM = Clamp Mount 4.5" Carbon SteelSRL 65 = 4" x 22" 1 TC = Tri-Clamp B = 304 SS BC200 = Band Clamp 200psi CMS = Clamp Mount 4.5" SS
1.5 C = 316 SS SB300 = Swing Bolt 300psi TP = Tripod Stand Carbon Steel2 SW = Swing away TPS = Tripod Stand SS
GT = Gauge TapsHD = Bag Compression DeviceSO = Side Output
Example - a 304SS SRL bag filter housing,size #65,1"FNPT, and 100psi Band Clamp is SRL-65-1-B-BC200
Page 200
ZenPure SRS Series Bag Housings
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
H71 Rev 2011.07
®
SRS Standard Series filter bag/strainer vessels are designed with a recessed basket and new horizontal pivoting cover. The new design achieves an advanced bag-to-vessel seal. These vessels are available in #1 and #2 sizes in a variety of pressure ratings with 150 psi being standard. Standard swing bolt closure allows for quick accessibility when a filter bag or strainer needs replacement. The SRS is an outstanding combi-nation of performance and value.
Materials of Construction Head: 316,304, Carbon Steel Bowl: 316,304, Carbon Steel O-Rings: Silicone, Viton or EPDM (Standard
Orientation Side-in/ Bottom-out (Standard) Side-in/ Side-out (optional)
Connections Inlet/Outlet : FNPT, Flange
Maximum Recommended Flow Rates and Surface Area For the following recommended flow rates, vessels need a minimum inlet/outlet size of 2" NPT. The recommended flow for basket and filter combination is for nominally rated filter bags, not for our high efficiency filter bag line.
SRS Bag Filter Housing Ordering Guide
Shown with optional compression device
SRS 1-2 SRS 2-2100 gpm* 200 gpm
*Rates are for nominally rated bags only
Standard Features
• Adjustable height tripod stand
• Inlet/outlet orientation: Side-in Bottom-out (standard) or Side-in Side-out (optional)
• Low pressure drop
• Positive cover seal
• Easily cleaned
• Heavy duty perforated basket
• Swing bolt closures
• .25" NPT vent tap
• Pipe sizes from .75" to 3" NPT, RFF or Quick Disconnect connections
Optional Features
• Epoxy coating, electopolish and fuse coating
• Jacketing
• Compression devices
• Wire mesh support baskets
• Mesh-lined basket for straining applications - 50 micron and higher
Housing Construction Bag Size Inlet/Outlet
Size (inch) Fitting Style Material Other Options
1 0.75 Blank = FNPT A = Carbon Steel SSS = Stainless Steel Swing BoltsSRS 2 1 F = Flange B = 304 SS SST = Stainless Stand
1.5 C = 316 SS D = 1" NPT Drain2 SO = Side Output3 GT = Gauge Taps
MB4 = Mesh Basket 304SSMB6 = Mesh Basket 316SSHD = Bag Compression Device
Example - a 304SS SRS bag filter housing,size #1, 2"FNPT is SRS-1-2-NB
Page 201
ZenPure SRH Series Bag Housings
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
H72 Rev 2011.07
®
All SRH Series filter bag/strainer vessels are designed for heavy service. The SRH housings come with a re-cessed basket, a volume displacer permanently welded to the top cover, and a stainless steel wire mesh retainer basket.
Our standard wire mesh baskets increase available fil-tration surface area up to 30% compared to the perfo-rated retainer baskets that come standard with competi-tors’ vessels. This unique and efficient design results in longer filter life and decreased labor costs.
Materials of Construction Head: 316, 304, Carbon Steel Bowl: 316, 304, Carbon Steel O-Rings: Silicone, Viton or EPDM (standard)
Orientation Side-in/ Bottom-out (Standard) Side-in/ Side-out (optional)
Connections Inlet/Outlet : Flange, FNPT
Maximum Recommended Flow Rates and Surface Area For the following recommended flow rates, vessels need a minimum inlet/outlet size of 2" NPT. The recommended flow for basket and filter combination is for nominally rated filter bags, not for our high efficiency filter bag line.
Standard Features • Adjustable height tripod stand • Built-in volume displacer located on cover • Inlet/outlet orientation: Side-in Bottom-out (standard)
or Side-in Side-out (optional) • Low pressure drop • Positive cover seal • 150 psi design, available up to 3,000 psi
• Easily cleaned • Stainless steel wire mesh basket • ASME Code stamp available on all SRH style vessels
• Swing bolt closures • .25" NPT vent tap • Pipe sizes from .75" to 4" NPT, RFF or quick discon-
nect connections
Mesh Lined Retainer BasketBasket Strainer with Filter Bag
SRH 1 150 gpm 110 gpm 100 gpm 2.25SRH 2 300 gpm 220 gpm 200 gpm 4.5
ProductBasket Strainer
Surface Area Sq. Ft.
SRH Bag Filter Housing Ordering Guide Housing
Construction Bag Size Inlet/Outlet Size (inch) Fitting Style Material Other Options
1 0.75 Blank = NPT A =Carbon Steel GT = Gauge TapsSRH 2 1 (0.75-3" only) B = 304 SS HD = Bag Compression Device
2 F = Flange C = 316 SS MB4 = Mesh Basket 304SS3 MB6 = Mesh Basket 316SS4 PC = Powder Coat for CS
SO = Side OutSSS = SS Swing BoltsU = ASME CodeUM = ASME Code
Example - a 304SS SRH bag filter housing,size #2, with a 3" flange is SRH-2-3F-B
Page 202
ZenPure SRM Series Multi-Cavity Housings
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
H73 Rev 2011.07
®
SRM Multi-cavity filter vessels offer large surface areas capable of handling up to 5,600 gpm in a single housing. The increased surface area allows for longer processing time prior to filter change-out. The multi-cavity vessels can contain anywhere from two to 28 bags/baskets in a single vessel. Our standard side-inlet side-outlet design offers the greatest inlet/outlet flexibility and doesn’t re-quire a platform to be built in order to change-out or clean the filter bag or strainers.
Materials of Construction Head: 316L, 304, Carbon Steel Bowl: 316L, 304, Carbon Steel O-Rings: Silicone, Viton or EPDM (standard)
Orientation Side-in/ Side-out (Standard) Bottom-in/ Bottom-out (optional)
Connections Inlet/Outlet : Flange Vent/Drain : FNPT
Optional Features• Inlet/outlet orientation:
Ergonomically superior Side-in Side-out (standard) or Bottom-in Bottom-out (optional)
• Epoxy coating, electro-polish and fuse, or Teflon coating
• Low pressure drop, positive cover seal
• Higher pressure ratings available up to 3,000 psi
• Easily cleaned • Variety of lid-lifting devices - hydraulic, jack, or manual wheel davit
• Stainless Steel perforated baskets (standard)
• Jacketing
• ASME code stamp available • Sanitary construction
• Swing bold closures • Wire mesh support baskets
• 1" to 2" NPT drain port on bottom • Mesh-lined basket for straining applications - 50 micron and higher
• .5" to 1" NPT pressure gauge/vent tap
• Differential pressure gauge taps
• Pipe sizes from 2" to 14" RFF connections
• Davit lift
• Compression Device
Standard Features
Housing Construction
Multi Bag Option
Inlet/Outlet Size (inch)
Fitting Style Material Other Options
2 = 2 Bags 2 F = Flange A =Carbon Steel GT = Gauge TapsSRM 3 = 3 Bags 3 B = 304 SS MB4 = Mesh Basket 304 SS
4 = 4 Bags 4 C = 316 SS MB6 = Mesh Basket 316 SS5 = 5 Bags 6 PC = Powder Coat for CS6 = 6 Bags 8 SSS = SS Swing Bolts8 = 8 Bags 10 U = ASME Code10 = 10 Bags 1212 = 12 Bags 14
CustomExample - a 3 bag 304SS SRM bag filter housing,size #2, with a 3" flange is SRM-3-3F-B
SRM Bag Filter Housing Ordering Guide
Page 203
ZenPure Portable Bag Filter Cart
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
H74 Rev 2011.07
®
Portable bag filter carts are ideal for those who need filtration at several location but don’t have the foot-print space for fixed filtration units. It also is ideal for filtration testing to prove the benefits of filtration without the permanent commitment of installing fil-tration equipment.
These carts can be sold with or without the pump ena-bling the using to select the ideal pump for their appli-cation. A turn-key system complete with factory in-stalled pumps chosen for your unique application is readily available
The bag filter carts are designed to offer customers the greatest flexibility to handle a variety of application throughout a manufacturing facility. Available in two or four wheel designs, these units are the perfect choice for station to station, or remote location filtra-tion applications. Materials of Bag Filter Housing
Carbon Steel 304 Stainless Steel 316 Stainless Steel Housing Sizes 1, 2, 30, 65 Pumps Specified by customer or application Electric, Pneumatic, Impellor, Bellows, Diaphragm, others Options �� Heavy Duty Wheels - two or four �� Epoxy, Teflon or Fuse Coating �� ASME Code Stamp �� Two or more vessels configured in
parallel or series �� Differential pressure gauges �� others
Features Benefits �� Portable �� Can be utilized in more than
one location
�� Complete Prefabricated System
�� Comes from the factory ready to plug in to your system and filter
�� Customizable �� Designed to the customers specification to meet their needs
Page 204
ZenPure Industrial High Purity Vent Filter Housing
ZenP
ure
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
H75 Rev 2011.07
®
The industrial high purity stainless steel vent housing is constructed of 316L stainless steel for high purity appli-cations to allow venting of large and small tanks. The housing is typically used in the food and beverage in-dustries. The housing comes in 10" to 40" sizes to meet the needs of your application. The housing is a clean and easy way to provide filtered air into tanks as well as al-lowing gasses to flow out.
The housing can support 222 and 226 o-rings and Code F, double open-ended filters. The design of the housing provides for a positive seal with the filters, thereby, pre-venting fluid bypass. The unique design for Code F filters allows for cost saving and ease of installation. The housing is attached by the use of a flange on the inlet and a tri-clamp, or FNPT fitting, on the outlet.
Customization available upon request.
Materials of Construction Head: 316L Stainless Steel Bowl: 316L Stainless Steel Clamp: 304 Stainless Steel Center Post with Seal Plate: 316L SS O-Rings: Silicone, Viton or EPDM
Dimensions (nominal) Lengths (in): 10 , 20, 30 and 40
Connections Inlet/ Outlet : Tri-clamp, Flange, FNPT Vent / Drain : Tri-clamp, FNPT
Finish Exterior: Bead Blast, Electropolish
Operating Conditions Max operating pressure: 125 psi (10 bar) at 200°F (93°C) Test Pressure : 165psi (11.4 bar) at 75°F (24°C)
Industrial High Purity Vent Filter Housing Ordering Guide
Applications Fine Chemicals Ink Jets Plating Solutions Electronics Process Water Pharmaceuticals Beverages Biologics
ConstructionNumber of
F iltersConfiguration Length
Cartridge Code
Inlet Connection Outlet ConnectionGasket
MaterialInterior/Exterior F inish
IHP = Industrial 11 = 1 Filter IIV = In-Line Vent 11=10" 11 = DOE 33/4F = 3/4" Flange 11 1/2TC = 1 1/2" Tri-clamp EE = EPDM BBBP = Bead Blast & PassivateHigh Purity 2=20" 77 = 2-226 11 1/2NPT = 1 1/2" FNPT VV = Viton EEP = Electropolish
3=30" 88 = 2-222 SS = Silicon 4=40"
Example - 10" for a 222 filter, In-line with 3/4" inlet Flange, and 1.5"outlet Tri-clamp, EPDM Gasket and Electropolished is IIHP1IV183/4F11/2TCEEP
Page 205
Sanitary Stainless Steel Vent Housing
ZenPure Ze
nPur
e
Features Benefits ■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide range of
chemicals ■ The electropolished finish eliminates possible contamination
that could potentially leach into the process chemicals.
■ Tri-clamp ■ The housing allows for inspection of the filter before the housing is sealed.
■ Easy filter change-out
Applications Fine Chemicals Ink Jets Plating Solutions Electronics Process Water Pharmaceuticals Beverages Biologics
ZenPure® sanitary stainless steel vent housing is constructed of 316L stainless steel for high purity applications to allow venting of large and small tanks. The housing comes in 5" to 30" sizes to meet the needs of your application. The de-sign provides a clean and easy way to provide filtered air into tanks as well as allowing gasses to flow out.
The housing can support filters with 2-226 o-rings. It pro-vides a positive seal on the filters that will prevent any par-ticulate bypass. The housing is sealed by the use of a tri-clamp that requires no special tools to open or close.
Materials of Construction Head: 316L Stainless Steel Bowl: 316L Stainless Steel Clamp: 304 Stainless Steel
O-Rings: Silicone, EPDM, Viton, PTFE
Dimensions (nominal) Lengths: 5 in., 10 in., 20 in., 30 in., Width: 5.51 in. (140mm)
Connections Inlet/ Outlet: 1.5" Sanitary Fitting
Finish Electropolished
Operating Conditions Max operating pressure: 145 psi (10 bar)
Atmospheric Tank Vent Housing
Page 206
ZenPure Sanitary Stainless Steel Vent Housing
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
H76 Rev 2011.07
Sanitary Stainless Steel Vent Housing Ordering Guide
Nominal Length H (Bowl Height)5" 185mm (7.28")10" 305mm (12.0")20" 555mm (21.85")30" 805mm (31.69")
Housing Construction
Material Cartridge # Cartridge Code
Length CONNECTION Gasket Materials
SV = Sanitary P = 316L 01 = 1 Round 7 = 2-226 05 = 5" = 1.5" Tri-clamE = EPDMVent Filter 10 = 10" Sanitary Fitting S = SiliconeHousing 20 = 20" V = Fluoro-elastomer
30 = 30" F = PTFEExample - 10" Sanitary SS Vent Housing with Silicon gasket for Code 7 filter with1.5" Sanitary connection - SVP01710CS
Page 207
Sample and Vent Valves
ZenPure Ze
nPur
e
®
The sample and vent valves for stainless steel filter housings are engineered for cleanliness and ease of use. The valves are con-structed of 316L stainless steel for excellent resistance to corrosive chemicals and to ensure product purity. They are machined to a <20Ra finish. Each valve comes with it's own serial number, material certificates and certificate of compliance.
The valves come in both in-line and 90 degree models. Additional assemblies come with a pressure gauge, tee fitting and valve for ease of use. The output fitting on the valve is a hose barb to make quick attachments with a hose to vent or take samples. The design of the unit minimizes dead space for possible contamination build-up between usage. The valve has a limited stem travel for safety and valve protection. The knob is made out of Delrin®, a material from DuPont, which is durable, low wear, low friction plastic, ideal for this application.
The newest release are the inline sampler with a constant flow throw purge. The liquid is pulled from the middle of the stream for sampling. The sample tube is constantly being flushed through by the moving fluid pressure and exiting a small hole on the down stream side right before the Ferrule, NPT or Weld con-nection to the tubing.
Materials of Construction Body: 316L Stainless Steel Knob: Solid Delrin Knob O-Rings: Silicone, Teflon (optional)
Connections Inlet: Tri-clamp, Ferrule, NPT, Butt Weld Outlet: 3/8" Hose Barb
Finish Machined <20Ra
Operating Conditions Max operating pressure: 400 psi (27 bar) at 200°F (93°C)
Applications Filter Housings Tanks Product Sampling Product testing Pressure Vessels Day Tanks
Example: Cross section of pipe with flow through purge valve
PN # OFSVILF Inline 1/2" Tri-clamp
PN # OFSVILF1.13 EXT Inline 1/2" Tri-clamp with 1
1/8” Extension
A few examples of options - See back for more details
Page 208
ZenPure Sample and Vent Valves
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
H77 Rev. 2011.07
IN-LINE WELD
2.40"
IN-LINE 1/4" NPTIN-LINE 1/2" FERRULE
1.16"Ø
90° 1/2" FERRULE90° 1/4" NPT 90° 1/2" WELD
2.05"
1.31"
1/4" HOSEBARB
P/N OFSV90F
P/N OFSVILF P/N OFSVILN
P/N OFSV90N P/N OFSV90W
P/N OFSVILW
SANITARY VALVE
1/4" MACHINED TEE
WIKA INDUSTRIAL GAUGE 2" Ø GLYCERINE FILLED
1/4" HALF COUPLING SANITARY
VALVE
WIKA MODEL M93X.2A 2 1/2" Ø SANITARY GAUGE
GLYCERINE FILLED
0 160 1 1/2" SANITARY SPOOL WITH (2) CLAMPS & (2) SILICONE GASKETS
1 1/2" FERRULE
Additional Assembly Options Industrial Pressure Gauge and Vent
Valve Assembly
P/N IGAOFSVILN P/N SGAOFSVILW
Sanitary Pressure Gauge and Vent Valve Assembly
�� 100-160 PSI Pressure Gauge �� 316L Stainless Steel �� Sanitary Vent/Sample Valve �� Machined 1/4" NPT Tee
�� 100-160 PSI Pressure Gauge �� 316L Stainless Steel �� Sanitary Vent/Sample Valve �� 1 1/2" Electropolished Tri-Clamp Spool �� (2) Silicone Gaskets & (2) SS Clamps
PART NUMBER VALVE DESCRIPTION OFSVILF Inline 1/2" Ferrule
OFSVILF-1.13EXT Inline 1/2" Ferrule w/ 1 1/8" Stem Extension for
1 1/2" & Smaller Tube Run
OFSVILF-2EXT Inline 1/2" Ferrule w/ 2" Stem Extension for 2"
& Larger Tube Run OFSV90F 90 Degree 1/2" Ferrule OFSVILF-1 Inline 1 - 1 1/2" Ferrule
OFSVILF-1-1.13EXT Inline 1 - 1 1/2" Ferrule w/ 1 1/8" Stem
Extension OFSVILF-1-2EXT Inline 1 - 1 1/2" Ferrule w/ 2" Stem Extension
OFSV90F-1 90 Degree 1 - 1 1/2" Ferrule OFSVILF-2 Inline 2" Ferrule
OFSVILF-2-1.13EXT Inline 2" Ferrule w/ 1 1/8" Stem Extension OFSVILF-2-2EXT Inline 2" Ferrule w/ 2" Stem Extension
OFSV90F-2 90 Degree 2" Ferrule OFSVILN Inline 1/4" NPT
OFSVILN-1.13EXT Inline 1/4" NPT w/ 1 1/8" Stem Extension OFSVILN-2EXT Inline 1/4" NPT w/ 2" Stem Extension
OFSV90N 90 Degree 1/4" NPT OFSVILW Inline Weld Body
OFSVILW-1.13EXT Inline Weld Body w/ 1 1/8" Stem Extension OFSVILW-2EXT Inline Weld Body w/ 2" Stem Extension
CUSTOM CONFIGURATIONS OF 90 DEGREE VALVES W/
Page 209
Sanitary Y-Strainer
ZenPure Ze
nPur
e
®
The sanitary Y-Strainer is constructed of 316L stainless steel for excellent resistance to corrosive chemicals and to ensure product purity. The strainer is utilized in the food and beverage industry to remove impurities from the liquid stream.
We offer a complete line of strainers that range from 1.5" to 6" inlet/outlet with sanitary, flange or I-Line union connections to fit your flow rates. The wellscreen design is durable and can handle high differential pressure without failure. The Y-style makes for easy servicing without removing the entire unit, sav-ing time and effort. The large sightglass allows for easy viewing of the upstream (dirty) wellscreen surface.
Customization of the housing is available. Materials of Construction Body: 316L Stainless Steel Siteglass: Glass Clamp: 304 Stainless Steel Gasket: Silicone, Viton or EPDM Wellscreen: 316L Stainless Steel
Connections Inlet/Outlet : Tri-clamp, Flange and I-Line Union Sizes (in): 1.5, 2, 3, 4, 6
Finish Interior/Exterior: Bead Blast and Passivate, or Electropolished
Operating Conditions Max operating pressure: 125 psi (10Bar) at 200°F (93°C) Test Pressure : 165psi (11.4 Bar) at 75°F (24°C)
Applications Food & Beverage Ink Jets Fine Chemicals Electronics Plating Solutions Pharmaceuticals Process Water Parts Cleaning
Features Benefits ■ Wide Chemical & Thermal Compatibility ■ Provides excellent compatibility with a wide range of
chemicals ■ The electropolished finish eliminates possible contamination
that could potentially leach into the process chemicals
■ Y - Design ■ For quick change out, and ease of use ■ Provides the ability to put the strainer into a straight line of
pipe
■ Siteglass ■ Allows the user to see the wellscreen and particulate matter without opening the housing
■ Prevents unnecessary contamination of the fluid stream
Picture of Internal WellScreen
Page 210
ZenPure Sanitary Y-Strainer
ZenPure Your Local Distributor:
ZenPure and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company Copyright 2003-2012 ZenPure or an affiliated company All rights reserved
North & South Americas: ZenPure Americas, Inc www.zenpure.com [email protected] 703-335-9910
All Other Regions: ZenPure Corporation www.zenpure.com [email protected] +86 571 2288 6800
H79 Rev. 2011.07
TRICLAMPO-RING SEAL
HANDLE
WELLSCREEN
GASKET
INLET
ISOMETRICVIEW
OUTLET
SIGHTGLASSASSEMBLE(QTY 2)
Sanitary Y-Strainer Ordering Guide
Outside to Inside Flow
ConstructionInlet/Outlet F itting Size
Inlet/Outlet F itting Style
Strainer Slot Size
Gasket Material
Interior/Exterior F inish
SYS = Sanitary 1.5 = 1.5" TTC = Tri Clamp E = EPDM BBBP = Bead Blast & PassivateY-Strainer 2 = 2" FF = Flange V = Viton EEP = Electropolish
3 = 3" II = I-Line Union S = Silicon4 = 4" 6 = 6"
***M - Pick U.S. Mesh Size
from Table
Example - Y- Strainer with 2" flange fitting with a 100 mesh stainer, EPDM gasket and electropolished is SSYS2F100MEEP
U.S Mesh Inches Microns Millimeters3 0.2650 6730 6.730
3.5 0.2230 5660 5.6604 0.1870 4760 4.7605 0.1570 4000 4.0006 0.1320 3360 3.3607 0.1110 2830 2.8308 0.0937 2380 2.380
10 0.0787 2000 2.00012 0.0661 1680 1.68014 0.0555 1410 1.41016 0.0469 1190 1.19018 0.0394 1000 1.00020 0.0331 840 0.84025 0.0280 707 0.71030 0.0232 595 0.59035 0.0197 500 0.50040 0.0165 420 0.42045 0.0138 354 0.35050 0.0117 297 0.29760 0.0098 250 0.25070 0.0083 210 0.21080 0.0070 177 0.177
100 0.0059 149 0.149120 0.0049 125 0.125140 0.0041 105 0.105170 0.0035 88 0.088200 0.0029 74 0.074230 0.0024 63 0.063270 0.0021 53 0.053
Y- Strainer Slot Size
Page 211
ZenPureZ
enP
ure
BENEFITS OF ELECTROPOLISHING STAINLESS STEEL PRODUCTS
The Electro polishing process creates a super Passivated finish. This finish protects the material from corrosive environments, while adding the benefit of improving the luster and the finish of the smoothness of the item. A surface may be enhanced to the point it becomes non-particulating. An easy solution for most stainless steel finishing needs.
Benefits of the electropolishing process:
CORROSION RESISTANCE Removes impurities which leaves a homogenous metal surface. Salt spray tests show an EP’ d surface is 4 - 5 times more resistant to corrosion. long enough.
APPEARANCE EP vastly improves the finish of most series of stainless steel. There is no other finish that can create such a brilliant ef-fect.
SUPER CLEANING EP’d surfaces are stain and bacteria resis-tant. This benefit makes electro polishing a great solution for the food, beverage, chemical and pharmaceutical industries.
LONGEVITYMetal that has been through the Electro Polishing process, has be been stress relieved. This improves the fatigue strength of the metal.
MICROFINISHING A normal EP process will improve micro finish to a factor of 2. A part with a 40 RA can be reduced to a 20 RA if exposed long enough.
DEBURRING Many parts are too fragile or heavy for tumbling have deep recesses, that make mechanical de-burring almost impossible. EP is a cost effective way to enhance your product and remove these burrs.
Page 212
Sym
bolic
R
atin
g
A<1
0% in
30d
ays
to 1
yea
r<1
5% in
30d
ays
to 1
yea
r<1
5% in
30d
ays
to 1
yea
r<1
5% in
30d
ays
to 1
yea
rB
<15%
in 3
0day
s to
1 y
ear
<30%
in 3
0day
s to
1 y
ear
<30%
in 3
0day
s to
1 y
ear
<30%
in 3
0day
s to
1 y
ear
C<2
0% in
30d
ays
to 1
yea
r<5
0% in
30d
ays
to 1
yea
r<5
0% in
30d
ays
to 1
yea
r<6
0% in
30d
ays
to 1
yea
rN
R>2
0% im
med
iate
ly to
1 y
ear
>50%
imm
edia
tely
to 1
yea
r>2
0% im
med
iate
ly to
1 y
ear>
60%
imm
edia
tely
to 1
yea
rS
ever
- at
tack
, sw
ellin
g, a
nd s
ofte
ning
. Not
reco
mm
ende
d.
INTE
RPR
ETAT
ION
OF
DAT
A
Exc
elle
nt -
little
or n
o sw
ellin
g, s
ofte
ning
or s
urfa
ce d
eter
iora
tion.
Goo
d - M
inor
sw
ellin
g, s
ofte
ning
or s
urfa
ce d
eter
iora
tion.
Lim
ited
- M
oder
ate
chem
ical
atta
ck. C
ondi
tiona
l ser
vice
.
Line
ar (
Pla
stic
s)V
olum
etric
(E
last
omer
s)D
escr
iptio
n of
Che
mic
al R
esis
tanc
e (P
last
ics)
(Ela
stom
ers)
Swel
ling
Loss
of T
ensi
le S
tren
gth
Che
mic
al N
ame
Form
ula
Visc
osity
(
cp)
Surf
ace
Tens
ion
(dyn
es/c
m)
PTFE
PVD
FPo
lypr
opyl
ene
Nyl
onPE
SVi
ton
Silic
onB
una
NEP
DM
TEV
TES
Pure
Flo
PTFE
Pure
Flo
PVD
FPu
reFl
o PP
Mel
t Blo
wn
PPPu
reFl
o N
ylon
Pure
flo P
ES
Ace
tic A
cid
(gla
cial
)C
2H4O
2
5% 2
0C 1
.1cp
50
% 2
0C 2
.2cp
80
% 2
0C 2
.7cp
10
0% 2
0C 1
.2cp
50
C 0
.796
cp
29.3
@25
CA
A to
122
º FA
to 1
00º F
NR
A to
70º
FN
RA
30%
to
70º F
NR
A to
100
º FA
AA
to 1
00º F
A to
100
º FA
to 1
00º F
A to
100
º FN
RA
to 7
0º F
Ace
tone
CH
3C0C
H3
0C 0
.391
cp
20
C 0
.318
cp26
.2A
NR
A to
230
º FA
to 7
0º F
NR
NR
C @
100
º FN
RA
to 2
00º F
AA
A to
230
º FN
RA
to 2
30º F
A to
230
º FA
to 7
0º F
NR
Alc
ohol
s, G
ener
alA
A to
275
º FA
B to
70º
FA
to 7
0º F
Var
iabl
eA
B to
200
º FN
RA
B to
100
º FA
C to
70º
FA
AA
B to
70º
FA
B to
70º
FA
B to
70º
FA
B to
70º
FA
B to
70º
FV
aria
ble
Am
ines
, Gen
eral
AN
RA
B to
120
º FA
to 7
0º F
NR
BC
to 7
0º F
NR
AC
to 7
0º F
AA
AB
to 1
20º F
NR
AB
to 1
20º F
AB
to 1
20º F
A to
70º
F
Am
mon
ium
Flu
orid
eN
H4F
40%
20C
4cp
95A
A to
280
º FA
to 2
25º F
AB
to 7
0º F
A to
140
º FA
to 7
0º F
AB
to 7
0º F
A to
140
º FA
AA
to 2
25º F
A to
225
º FA
to 2
25º F
A to
225
º FA
B to
70º
F
Am
mon
ium
H
ydro
xide
NH
4OH
10%
20C
1.1
cp
28%
20C
1.2
cp
54%
20C
1.3
cp62
AA
to 2
00º F
A to
225
º FA
C to
122
º FA
to 2
0% to
70º
F
AB
to 1
90º F
A to
70º
FA
38%
to
200º
FA
to 1
60º F
AA
A to
225
º FA
to 2
25º F
A to
225
º FA
to 2
25º F
AC
to 1
22º F
A to
20%
to
70º F
Am
mon
ium
P
ersu
lfate
AA
to 2
60º F
A to
225
º FN
RA
B to
140º
FN
RN
RA
to 7
0º F
AA
A to
225
º FA
to 2
25º F
A to
225
º FA
to 2
25º F
NR
Am
mon
ium
P
hosp
hate
NH
4x(P
O4)
y
AA
to 2
80º F
A to
225
º FA
B to
70º
FA
B to
180º
FA
to 7
0º F
NR
A to
70º
FA
AA
to 2
25º F
A to
225
º FA
to 2
25º F
A to
225
º FA
B to
70º
F
Am
mon
ium
Sul
fate
(D
olam
in)
AA
to 2
80º F
A to
225
º FA
B to
70º
FA
to 1
76º F
A to
70º
FA
to 2
00º F
A to
300
º FA
AA
to 2
25º F
A to
225
º FA
to 2
25º F
A to
225
º FA
B to
70º
F
Aqu
a R
egia
(N
itroH
ydro
chlo
ric
Aci
d)
~80%
HC
L +
20%
HN
O3
AA
to 1
00º F
C @
70º F
NR
AB
to 1
90º F
NR
NR
BC
to 7
0º F
AA
C @
70º F
C @
70º F
C @
70º F
C @
70º F
NR
Bee
rA
A to
250
º FA
to 2
00º F
A to
70º
FA
to 7
0º F
A to
176
º FA
to 7
0º F
A to
140
º FA
to 1
40º F
AA
A to
200
º FA
to 2
00º F
A to
200
º FA
to 2
00º F
A to
70º
FA
to 7
0º F
Bor
ic A
cid
H3B
O3
AA
to 2
80º F
A to
225
º FN
RA
to 7
0º F
A to
185
º FA
to 7
0º F
A to
140
º FA
to 1
76º F
AA
A to
225
º FA
to 2
25º F
A to
225
º FA
to 2
25º F
NR
A to
70º
F
But
yl A
ceta
teC
H3C
OO
(CH
2)3
CH
3
20
C 0
.734
cp
25
C 0
.688
cp24
.9 @
25C
AA
to 7
0º F
NR
A to
200
º FB
@ 7
0º F
NR
NR
NR
BC
to 7
0º F
AA
NR
NR
NR
NR
NR
NR
But
yl A
lcoh
olC
4H9O
H20
C 2
.948
cp
30
C 2
.30c
p27
AA
to 2
75º F
AB
to 1
80º F
AB
to 1
20º F
A to
70º
FA
to 2
50º F
A to
70º
FA
to 1
40º F
A to
185
º FA
AA
B to
180
º FA
B to
180
º FA
B to
180
º FA
B to
180
º FA
B to
120
º FA
to 7
0º F
Car
bon
Tetra
chlo
ride
CC
l420
C
0.97
cp
25
C 0
.793
cp29
.5A
AB
to 1
50º F
NR
A to
200
º FA
B to
212
º FA
to 2
50º F
NR
NR
NR
AA
NR
NR
NR
NR
NR
NR
Chr
ome
Pla
ting
Sol
utio
nsA
A to
260
º FA
C to
70º
FN
RA
to 7
0º F
B to
70º
FN
RB
to 7
0º F
AA
AC
to 7
0º F
AC
to 7
0º F
AC
to 7
0º F
AC
to 7
0º F
NR
Citr
ic A
cid
C6H
8O7
AA
to 2
75º F
A to
180
º FN
RA
to 7
0º F
AA
AA
AA
A to
180
º FA
to 1
80º F
A to
180
º FA
to 1
80º F
NR
A to
70º
FC
oppe
r Sul
fate
&
H2S
O4
Cop
per S
ulfa
te &
H
2SO
42
AA
to 2
75º F
A to
225
º FA
C to
140
º FA
to 7
0º F
A to
140
º FN
RB
to 7
0º F
A to
250
º FA
AA
to 2
25º F
A to
225
º FA
to 2
25º F
A to
225
º FA
C to
140
º FA
to 7
0º F
Cyc
lohe
xano
neC
6H10
O2.
4 @
15C
38A
AB
to 1
22º F
BC
@70
º FA
to 7
0º F
NR
NR
NR
NR
NR
AA
BC
@70
º FB
C @
70º F
BC
@70
º FB
C @
70º F
BC
@70
º FN
R
DI W
ater
(20C
)H
2O20
C:1
.0cp
,
50:
0.6c
p,
100C
:0.3
cp72
AA
AA
A to
70º
FA
AA
AA
AA
AA
AA
A to
70º
F
DI W
ater
(HO
T)
(8
0C)
H2O
20C
:1.0
cp,
50
: 0.
6cp,
10
0C:0
.3cp
62.6
AA
to 2
80º F
A to
225
º FN
RA
AA
A to
225
º FA
to 2
25º F
A to
225
º FA
to 2
25º F
NR
A to
225
º F
Dic
hlor
oace
tic A
cid
CL 2
CH
CO
2HA
AB
to 1
25º F
AB
to 1
25º F
NR
NR
NR
NR
NR
AA
AB
to 1
25º F
AB
to 1
25º F
AB
to 1
25º F
AB
to 1
25º F
NR
Filte
r Rec
omm
enda
tion
CH
EMIC
ALFi
lter M
ater
ial (
Plas
tics)
Orin
g M
ater
ial (
Elas
tom
ers)
Che
mic
al C
ompa
tibili
ty T
able
Fo
r Zen
Pure
Filt
ratio
n P
rodu
cts
Zen
Pu
re
Page
213
Che
mic
al N
ame
Form
ula
Visc
osity
(
cp)
Surf
ace
Tens
ion
(dyn
es/c
m)
PTFE
PVD
FPo
lypr
opyl
ene
Nyl
onPE
SVi
ton
Silic
onB
una
NEP
DM
TEV
TES
Pure
Flo
PTFE
Pure
Flo
PVD
FPu
reFl
o PP
Mel
t Blo
wn
PPPu
reFl
o N
ylon
Pure
flo P
ES
DiM
ethy
l For
mam
ide
(DFM
)H
CO
N(C
H3)
220
C 0
.845
cp
50
C 0
.598
cp
36.7
@ 2
0C
34.4
@ 4
0CA
NR
A to
125
º FA
to 7
0º F
NR
NR
BC
to 7
0º F
NR
C to
70º
FA
AA
to 1
25º F
NR
A to
125
º FA
to 1
25º F
A to
70º
FN
R
Dim
ethy
lsul
foxi
de
(DS
MO
)C
H3S
OC
H3
20C
2.
14cp
43A
NR
A to
125
º FA
to 7
0º F
NR
NR
A to
70º
FC
to 7
0º F
A to
70º
FA
AA
to 1
25º F
NR
A to
125
º FA
to 1
25º F
A to
70º
FN
R
Eth
yl A
ceta
te (A
cetic
E
ther
)C
H3C
OO
C2H
5
15C
0.4
73cp
20C
0.4
5cp
25C
0.4
26cp
23.4
@ 2
5CA
A to
70º
FA
to 2
25º F
A to
122
º FN
RN
RB
to 7
0º F
NR
A to
130
º FA
AA
to 2
25º F
A to
70º
FA
to 2
25º F
A to
225
º FA
to 1
22º F
NR
Eth
yl A
lcoh
olC
2H5O
H20
C 1
.200
cp
30
C 1
.003
cp24
AA
to 2
75º F
AB
to 7
0º F
A to
70º
FV
aria
ble
B to
70º
FA
B to
200
º F
A to
140
º FA
to 2
00º F
AA
AB
to 7
0º F
AB
to 7
0º F
AB
to 7
0º F
AB
to 7
0º F
AB
to 7
0º F
Var
iabl
e
Eth
ylen
e G
lyco
lC
H2O
HC
H2O
H26
cp
@ 1
5C
21
cp
@ 2
0 C
17.3
cp
@ 2
5 C
AA
to 2
60º F
A to
225
º FA
to 7
0º F
A to
212
º FA
to 2
00º F
A to
250
º FA
to 2
50º F
A to
250
º FA
AA
to 2
25º F
A to
225
º FA
to 2
25º F
A to
225
º FA
to 7
0º F
A to
212
º F
Ferro
us S
ulfa
teFe
SO
4A
A to
275
º FA
to 2
25º F
NR
A to
70º
FA
to 1
76º F
B to
70º
FA
to 1
60º F
A to
176
º FA
AA
to 2
25º F
A to
225
º FA
to 2
25º F
A to
225
º FN
RA
to 7
0º F
Form
ic A
cid
(For
myl
ic
Aci
d)C
H2O
2A
A to
214
º FA
to 7
0º F
NR
A to
70º
FN
RB
to 7
0º F
B to
70º
FA
to 2
10º F
AA
A to
70º
FA
to 7
0º F
A to
70º
FA
to 7
0º F
NR
A to
70º
F
Freo
n 13
AA
to 2
00º F
Var
iabl
eA
to 7
0º F
A to
70º
FA
B to
70º
FN
RA
to 7
0º F
A to
70º
FA
AV
aria
ble
Var
iabl
eV
aria
ble
Var
iabl
eV
aria
ble
Var
iabl
e
Hex
ane
C6H
14A
A to
275
º FB
/NR
@ 7
0º F
A to
70º
FA
to 7
0º F
A to
200
º FN
RA
to 2
50º F
NR
AA
B/N
R @
70º
F
B/N
R @
70º
FB
/NR
@ 7
0º F
B/N
R @
70º
FB
/NR
@ 7
0º F
B/N
R @
70º
F
Hyd
robr
omic
Aci
d (H
ydro
gen
Bro
mid
e)H
Br
AA
to 2
75º F
C/N
R @
70º
FN
RA
to 7
0º F
A to
70º
FN
RA
to 2
00º F
AA
C/N
R @
70º
F
C/N
R @
70º
F
C/N
R @
70º
FC
/NR
@ 7
0º
FN
R
Hyd
roch
loric
Aci
d (M
uria
tic A
cid)
HC
L10
% 2
0C 1
.1cp
38
% 2
0C 2
.1cp
AA
50%
@ 1
75º F
A to
70º
FN
RA
50%
to 1
40º
FA
to 7
0º F
NR
NR
BC
to 7
0º F
AA
A to
70º
FA
to 7
0º F
A to
70º
FA
to 7
0º F
NR
A to
70º
F
Hyd
roflu
oric
Aci
dH
F5%
1cp
49
% 1
cpA
A 5
0% @
175
º FA
to 4
0% @
200
º F
NR
C
60%
@ 7
0º F
NR
NR
C to
70º
FA
AA
to 4
0% @
20
0º F
A to
40%
@
200º
FA
to 4
0% @
20
0º F
A to
40%
@
200º
FN
R
Hyd
roge
n P
erox
ide
H2O
230
% 2
0C 1
cpA
A to
200
ºF
A
B50
% to
250
ºF
A 8
0%H
2O2
to 7
0º F
A
5%
H2O
2 to
170º
F
B/N
R10
0% @
70º F
N
RA
to 7
0º F
NR
B to
70º
FN
RB
C to
70º
FA
AB
/NR
@70
º F B
/NR
@70
º F
B/N
R @
70º F
B
/NR
@70
º F
NR
B/N
R @
70º
F
Ink
AA
to 7
0º F
A to
180
º FA
B to
70º
FA
to 7
0º F
A to
140
º FA
to 7
0º F
AA
A to
180
º FA
to 7
0º F
A to
180
º FA
to 1
80º F
AB
to 7
0º F
Iodi
neI 2
AA
to 1
70º F
A to
75º
FN
RA
to 1
90º F
NR
B to
70º
FC
to 7
0º F
AA
A to
75º
FA
to 7
5º F
A to
75º
FA
to 7
5º F
NR
Isop
ropy
l Alc
ohol
(IP
A)
C3H
8O15
C 2
.86c
p
20
C 2
.5cp
30
C 1
.77c
p22
AA
to 1
50º F
A to
225
º FA
B to
70º
FA
to 7
0º F
A to
170
º FA
to 1
60º F
A to
70º
FA
to 1
60º F
AA
A to
225
º FA
to 1
50º F
A to
225
º FA
to 2
25º F
AB
to 7
0º F
A to
70º
F
Met
hyl A
lcoh
ol
(Met
hano
l)C
H3O
H20
C .
597c
p
25
C .5
47cp
30C
.51
0cp
22A
A to
148
º FA
to 7
0º F
NR
A to
70º
FN
RA
to 7
0º F
A to
70º
FA
to 1
60º F
AA
A to
70º
FA
to 7
0º F
A to
70º
FA
to 7
0º F
NR
A to
70º
F
Met
hyle
ne C
hlor
ide
CH
4Cl 2
15C
.44
9cp
20C
.42c
p
30
C .
393c
p26
AA
B to
100
º FN
RB
C to
70º
FN
RC
to 7
0º F
NR
NR
NR
AA
NR
NR
NR
NR
NR
NR
Min
eral
Spi
rits
AA
to 2
75º F
A to
100
º FA
to 1
05º F
A to
250
º FN
RA
to 2
50º F
NR
AA
A to
100
º FA
to 1
00º F
A to
100
º FA
to 1
00º F
A to
100
º F
Nic
kel C
horid
eN
iCl 2-
6H2O
AA
to 2
75º F
AB
to 1
80º F
NR
A to
212
º FA
to 1
60º F
A to
176
º FA
to 1
76º F
AA
AB
to 1
80º F
AB
to 1
80º F
AB
to 1
80º F
AB
to 1
80º F
NR
Nic
kel S
ulfa
teN
iSO
4-6H
2OA
A to
275
º FA
to 2
25º F
AB
to 7
0º F
AA
to 1
60º F
A to
176
º FA
to 1
76º F
AA
A to
225
º FA
to 2
25º F
A to
225
º FA
to 2
25º F
AB
to 7
0º F
Nitr
ic A
cid
HN
O3
40
% 2
0C 1
.6cp
AN
R 1
00%
@70
ºF
AC
50%
@ 1
60ºF
NR
80%
@70
ºF A
50
% @
104
ºFN
RN
RN
RN
RN
RN
RA
AN
R 8
0%
@70
ºF A
50
% @
104
ºF
NR
80%
@
70ºF
A 5
0%
@ 1
04ºF
NR
80%
@
70ºF
A 5
0%
@ 1
04ºF
NR
80%
@
70ºF
A 5
0%
@ 1
04ºF
NR
NR
NM
P (N
-Met
hyl 2
-P
yrro
lidon
e)C
H3N
(CH
2)3C
O25
C 1
.66c
p41
@20
C
33
-36@
80C
AN
RA
to 7
0º F
NR
AB
to 7
0º F
A to
70º
FA
AN
RN
R
Oxa
lic A
cid
(Eth
aned
ioic
Aci
d)C
2H2O
4A
AB
to 1
50º F
A to
140
º FN
RA
to 7
0º F
A to
250
º FB
to 7
0º F
B to
70º
FA
to 3
00º F
AA
A to
140
º FA
B to
150
º FA
to 1
40º F
A to
140
º FN
RA
to 7
0º F
Ozo
nate
d D
I Wat
er1c
pA
A to
230
º FN
RA
to 7
0º F
C to
70º
FB
to 7
0º F
NR
A to
70º
FA
AN
R
Ozo
neO
3A
A to
230
º FC
/NR
@ 7
0º F
NR
A to
70º
FA
to 7
0º F
AN
RA
to 7
0º F
AA
C/N
R @
70º
F
C/N
R @
70º
F
C/N
R @
70º
FC
/NR
@ 7
0º
FN
RC
/NR
@ 7
0º
FP
hosp
horic
Aci
d
(8
5%@
120-
160C
)H
3PO
485
% 1
20C
5cp
85
% 1
60C
3cp
A
A 8
5% @
316º
FN
RN
RA
to 2
12º F
NR
NR
NR
NR
AA
NR
NR
NR
NR
NR
NR
Pho
spho
ric A
cid
(85%
@20
C)
H3P
O4
85%
20C
49c
p A
A 8
5% @
316º
FA
to 1
85º F
NR
A to
212
º FA
to 1
58º F
NR
NR
A to
158
º FA
AA
to 1
85º F
A to
185
º FA
to 1
85º F
A to
185
º FN
RA
to 1
85º F
Pot
assi
um H
ydro
xide
(3
6%)
KO
H3.
1cp
~90
AA
to 1
67º F
A to
180
º FA
B to
70º
FA
50%
to 2
12º
FN
RC
to 7
0º F
AB
to 1
50º F
A to
210
º FA
AA
to 1
80º F
A to
167
º FA
to 1
80º F
A to
180
º FA
to 1
80º F
A to
180
º F
Pot
assi
um
Per
man
gana
teK
MN
O4
AA
to 2
50º F
A to
70º
FN
RA
20%
@16
0º F
C to
70º
FA
to 2
00º F
AA
A to
70º
FA
to 7
0º F
A to
70º
FA
to 7
0º F
NR
Filte
r Rec
omm
enda
tion
CH
EMIC
ALFi
lter M
ater
ial (
Plas
tics)
Orin
g M
ater
ial (
Elas
tom
ers)
Page
214
Not
e:
The
com
patib
ility
dat
a w
as a
ssem
bled
from
the
Che
mic
al R
esis
tanc
e G
uide
pub
lishe
d by
CO
MPA
SS P
UB
LIC
ATI
ON
S© Th
is ta
ble
is to
be
used
for a
gen
eral
gui
de o
nly.
Zen
Pu
re is
no
t res
pons
ible
for t
he a
ccur
acy
of th
is d
ata
and
assu
mes
no
oblig
atio
n of
liab
ility
in c
onne
ctio
n w
ith it
s use
. Zen
Pu
re r
ecom
men
ds th
at a
ll cu
stom
ers e
valu
ate
and
test
the
suita
bilit
y fo
r use
of f
ilter
s in
thei
r par
ticul
ar a
pplic
atio
n be
fore
usi
ng.
Zen
Pure
and
Pur
eFlo
are
regi
ster
ed tr
adem
arks
of
ZenP
ure
Cor
pora
tion.
Vito
n® is
a re
gist
ered
trad
emar
k of
Dup
ont D
ow E
last
omer
To c
onve
rt fr
om F
ahre
nhei
t to
Cel
sius
: °C
=(5/
9) x
(°F-
32)
To c
onve
rt fr
om C
elsi
us to
Fah
renh
eit:
°F =
(9/5
)°C
+32
Che
mic
al N
ame
Form
ula
Visc
osity
(
cp)
Surf
ace
Tens
ion
(dyn
es/c
m)
PTFE
PVD
FPo
lypr
opyl
ene
Nyl
onPE
SVi
ton
Silic
onB
una
NEP
DM
TEV
TES
Pure
Flo
PTFE
Pure
Flo
PVD
FPu
reFl
o PP
Mel
t Blo
wn
PPPu
reFl
o N
ylon
Pure
flo P
ES
Pyr
idin
e (A
zine
)C
5H5N
AN
RA
to 7
5º F
A to
70º
FN
RN
RN
RN
RB
to 7
0º F
AA
A to
75º
FN
RA
to 7
5º F
A to
75º
FA
to 7
0º F
NR
SC
1 (4
0-90
C)
NH
4OH
+ H
2O2
0.65
72A
A to
200
º FA
80%
H2O
2 to
70º
F
A 5
%H
2O2
to17
0º F
N
RA
20%
H2O
2 to
70º
F
NR
B to
70º
FN
RB
C to
70º
FA
A
A80
%H
2O2
to
70º F
A
5%H
2O2
to17
0º F
A80
%H
2O2
to
70º F
A5%
H2O
2 to
170º
F
A80
%H
2O2
to
70º F
A5%
H2O
2 to
170º
F
A80
%H
2O2
to
70º F
A5%
H2O
2 to
170º
F
NR
A20
%H
2O2
to
70º F
SC
2 (2
5-90
C)
HC
L +
H2O
2 +
H20
172
AA
50%
HC
L @
175
º F
A 8
0%H
2O2
to 7
0º F
A
5%
H2O
2 to
170º
F
NR
A 5
0%H
CL
to 1
40º
F A
20%
H2O
2 to
70
º FN
RN
RN
RB
C to
70º
FA
A
A80
%H
2O2
to
70º F
A
5%H
2O2
to17
0º F
A80
%H
2O2
to
70º F
A5%
H2O
2 to
170º
F
A50
%H
CL
@
175º
F
A80
%H
2O2
to
70º F
A5%
H2O
2 to
170º
F
A80
%H
2O2
to
70º F
A5%
H2O
2 to
170º
F
NR
A50
%H
CL
to
140º
F
A20
%H
2O2
to
70º F
Sila
ne (L
iqui
d)
N-[3
-(tr
imet
hoxy
sily
l)pr
opyl
]-1,2
-et
hane
diam
ine
AA
to 7
0º F
A to
70º
FA
AA
to 7
0º F
A
to 7
0º F
A to
70º
FA
to 7
0º F
Silic
on T
etra
chlo
ride
SiC
l4
AA
to 1
60º F
A to
100
º FN
RN
RN
RN
RA
AA
to 1
00º F
A to
100
º FA
to 1
00º F
A to
100
º F
Sod
ium
Chl
orid
e (S
alt)
NA
CL
AA
to 1
75º F
A to
225
º FA
to 7
0º F
A to
70º
FA
to 2
12º F
A to
70º
FA
to 1
60º F
A to
176
º FA
AA
to 2
25º F
A to
175
º FA
to 2
25º F
A to
225
º FA
to 7
0º F
A to
70º
F
Sod
ium
Hyd
roxi
de
(Cau
stic
Sod
a)N
AO
H
5% 2
0C 1
.3cp
20
% 2
0C 4
.6cp
40
% 2
0C 3
6.2c
p 50
% 2
0C 8
0cp
36%
: 101
AA
20%
@10
4ºF
N
R 7
0% @
70ºF
A 7
0% @
180º
FA
to 7
0º F
A 5
4% @
70ºF
AB
to 7
0º F
A to
70º
FB
to 7
0º F
A to
130
º FA
AA
70%
@
180º
F
A 2
0%
@10
4ºF
NR
70
% @
70ºF
A 7
0%
@18
0ºF
A 7
0%
@18
0ºF
A 7
0%
@18
0ºF
A 5
4%
@70
ºF
Sod
ium
Hyp
ochl
rite
(Ble
ach)
CLN
aOA
AB
to 2
75º F
A to
70º
FN
RB
to 7
0º F
AB
to 1
30º F
B to
70º
FN
RA
to 7
0º F
AA
A to
70º
FA
to 7
0º F
A to
70º
FA
to 7
0º F
NR
B to
70º
F
SP
M (P
iranh
a) (C
aro)
H2S
O4
+ H
2O2
Ozo
nize
d W
ater
A
NR
NR
NR
NR
NR
NR
NR
NR
AA
NR
NR
NR
NR
NR
NR
Sul
furic
Aci
d
(96%
@20
C)
H2S
O4
50%
20C
3.8
cp
96%
20C
25.
4cp
96%
50C
8.8
cp
50%
- 74
80%
- 69
90%
- 58
96%
- 55
AA
95%
@18
0º F
N
R10
0% @
70º F
A95
% @
70º F
N
R10
0% @
70º F
NR
NR
A to
158
º FN
RN
RN
RA
AA
95%
@70
º F
NR
100%
@
70º F
A95
% @
70º F
N
R10
0%
@70
º F
A95
% @
70º F
N
R10
0%
@70
º F
A95
% @
70º F
N
R10
0%
@70
º FN
RN
R
Sul
furic
Aci
d
(96%
@80
C)
H2S
O4
96%
80C
5.2
cp
50%
- 71
80%
- 69
90%
- 58
96%
- 55
AN
RN
RN
RN
RN
RN
RN
RN
RA
AN
RN
RN
RN
RN
RN
R
Sul
furic
Aci
d
(96%
@12
0C)
H2S
O4
96%
120
C 2
cp
50%
- 69
80%
- 67
90%
- 58
96%
- 55
AN
RN
RN
RN
RN
RN
RN
RN
RA
AN
RN
RN
RN
RN
RN
R
TMA
H
(tetra
met
hyla
mm
oniu
m h
ydro
xide
)1c
pA
A to
200
º FA
to 1
50º F
C to
70º
FB
to 7
0º F
C to
70º
FA
to 7
0º F
AA
A to
150
º FA
to 1
50º F
A to
150
º FA
to 1
50º F
A to
150
º FA
to 1
50º F
Tolu
ene
C7H
815
C 0
.623
cp
20
C 0
.59c
p
30
C 0
.523
cp27
.9 @
25C
AA
to 1
40º F
NR
A to
70º
FN
RA
B to
200
º FN
RN
RN
RA
AN
RN
RN
RN
RN
RN
R
Tric
hlor
oeth
ylen
e (T
riad)
C2H
Cl 3
20C
0.5
66cp
25C
0.5
32cp
30A
A to
189
º FN
RA
B to
70º
FN
RA
to 2
00º F
NR
NR
NR
AA
NR
NR
NR
NR
NR
NR
Xyle
neC
8H10
20C
.61
7cp
40C
0.4
97cp
28.4
@ 2
5CA
A to
175
º FC
to 7
0º F
A to
70º
FB
to 7
0º F
AB
to 2
00º F
NR
NR
NR
AA
C to
70º
FC
to 7
0º F
C to
70º
FC
to 7
0º F
C to
70º
FC
to 7
0º F
Filte
r Rec
omm
enda
tion
CH
EMIC
ALFi
lter M
ater
ial (
Plas
tics)
Orin
g M
ater
ial (
Elas
tom
ers)
Page
215
ZenPure
RE: TC-11003
ZenPure Corporation (USA) ZenPure Americas, Inc. (USA) ZenPure (Hangzhou) Co., Ltd.
TERMS AND CONDITIONS OF SALE
1. Acceptance: All orders are subject to approval and acceptance by Seller. A written acknowledgement sent to Buyer of orders so approved shall constitute such acceptance by Seller. Seller may at any time alter or suspend credit, refuse shipment, or cancel unfilled orders when, in Seller’s opinion, the financial condition of Buyer warrants it, or when delivery is delayed by fault of Buyer or Buyer is delinquent in any pay-ment. No order accepted by Seller will be subject to cancellations, termination, suspension, change, reduction, cutback, or any other modi-fications except with Seller’s prior written consent. Any such modifica-tions may be subject to a charge as determined by Seller. The terms of this contract shall supersede any conflicting terms contained on Buyer’s purchase order or any document or instrument submitted by Buyer.
2. Cancellation: Orders may be canceled or deliveries deferred only upon the condition the Buyer assumes immediate liability for and makes prompt payment to Seller of all expenses incurred, charges for commit-ments made by Seller, profit on work in process and contract value of items completed and ready for shipment.
3. Prices, Taxes, and Payment: All prices are firm unless otherwise agreed in writing. Seller reserves the right to change the prices and specifications of its Products at any time without notice. Any tax, duty, custom or other fee of any nature imposed upon this transaction by any international, export, import, federal, state or local governmental author-ity shall be paid by Buyer in addition to the price quoted or invoiced. In the event Seller is required to prepay any such tax, Buyer will reimburse Seller. Payment terms shall be net 30 days after shipment by Seller.
4. Delivery and Shipment: Seller will make every effort to ship the Products or provide the services hereunder in accordance with the requested date, provided, that Seller accepts no liability for any losses or for general, special or consequential damages arising out of delays in delivery. Shipment of all Products shall be F.O.B point of distribution by Seller. Identification of the Products shall occur when they leave Seller point of distribution, at which time title and risk of loss shall pass to Buyer. All shipment costs shall be paid by Buyer and if prepaid by Seller the amount thereof shall be reimbursed to Seller within thirty (30) days after notice of such payment to Buyer.
5. Inspection: Buyer shall inspect all items upon arrival and shall give written notice to Seller within ten (10) days of arrival of any claim for shortage or non-conformance with the terms hereof. If Buyer shall fail to give such notice, all items shall be deemed to conform with, and Buyer shall be bound to accept and pay for items in accordance with the terms hereof.
6. Returns: No product may be returned without Seller’s prior written approval. Transportation charges are to be prepaid by Buyer. Re-turned goods are subject to the Seller’s inspection and acceptance. Seller may, in its discretion, either (a) refund to Buyer the amount paid for the returned items, (b) repair the returned items or (c) replace one or all returned items within a reasonable time after Seller determines that the returned goods are not in accordance herewith, and in such event Seller shall not be liable for any damages arising from the defective delivery or delay caused thereby. When expressly authorized by Seller in writing, unused products may be returned to Seller subject to service handling, restocking charges and rebuilding charges to “as new” condi-tion.
7. Force Majeure: Seller shall not be liable for any delays in the deliv-ery of orders, due in whole or in part, directly or indirectly, to fire, act of God, strike, shortage of raw materials, supplies or components, retool-ing, upgrading of technology, delays of carriers, embargo, government order or directive, or any other circumstance beyond Seller reasonable control.
8. Indemnification Against Infringement: Buyer shall protect and indemnify Seller and its affiliates, directors, officers, agents and employ-ees against all claims for damages or profits, including all reasonable costs incurred by Seller in connection therewith, arising from infringe-ment of patents, copyrights, trademarks or misappropriation of designs, proprietary data or trade secrets of any person with respect to all goods manufactured either in whole or in part in accordance with Buyer’s specification.
9. Indemnification: Buyer shall indemnify and hold harmless Seller its affiliates, directors, officers, agents and employees from all loses, claims, damages, expenses or liabilities of any kind (including attorney’s fees and court costs) resulting from or arising out of any use by Buyer of the products purchased herein.
10. Repairs, Alterations, and Modification: Any repairs made to the products shipped by the Seller shall be at the expense of the Buyer unless specifically authorized by the Seller in writing. Alterations or modifications to the product involving welding, soldering, drilling, or machining by the Buyer are not permitted or approved by the Seller without specific authorization in writing by the Seller. Any unauthorized alteration or modification by the Buyer will void the warranty.
11. Warranty: Seller warrants its products against defects in workman-ship and material for a period of 12 months from the date of shipment from the factory or Seller distr butor under normal use and service and otherwise when such products are used in accordance with instructions furnished by Seller and for purposes disclosed in writing at the time of purchase, if any. Seller’s liability under this warranty shall be limited to repair or replacement, F.O.B point of distribution, of any defective prod-ucts or part which, having been returned to the factory, transportation charges prepaid, has been inspected and determined by the Seller to be defective.
This warranty is in lieu of any other warranty either expressed or im-plied, as to the merchantability, quality, description, and fitness for any particular purpose or use, or any other matter.
Under no circumstance shall the Seller be liable to Buyer or any other third party for any loss of profits or other direct or indirect costs, ex-penses, losses or consequential damages arising out of or as a result of any defects in or failure of its products or any part or parts thereof or arising out of or as a result of parts or components incorporated in Seller’s products but not supplied by the Seller.
12. Arbitration: Any and all disputes or controversies arising under, out of or in connection with this contract or the sale or performance of the products shall be resolved by final and binding arbitration in the State of Nevada.
13. General: No items to be furnished hereunder shall be exported by Buyer or by any customer of Buyer unless Seller is first notified in writing of the intention to so export and all applicable regulations and licenses are complied with and obtained by Buyer or its customer. Seller reserves the right to make changes in design at any time without incurring any obligation to make such changes in any items previously purchased, whether or not delivered.
Seller expressly disclaims application of any government procurement regulations in connection with any items to be furnished hereunder unless expressly agreed to in writing by an authorized representative of Seller. Buyer understands that to the extent the goods are being shipped to the United States, the Seller’s sale of the product to Buyer are subject to U.S. export control laws and regulations and Buyer shall comply with all such laws and regulations.
Page 216
ZenPure
RE: TC-11003
ZenPure Corporation (USA) ZenPure Americas, Inc. (USA) ZenPure (Hangzhou) Co., Ltd.
Buyer is responsible for complying with all laws and regulations applica-ble to the purchase, export or import of the product of any state or coun-try. Seller’s liability to Buyer under this Agreement shall be limited to the value of the products that are subject to such claim. In no event will Seller be liable to Buyer for lost profits or revenues, claims of Buyer’s customers or any special, indirect, consequential or incidental damages.
The failure of Seller to enforce at any time any of the provisions of this contract, to exercise any election or option provided herein, or to require at any time performance by Buyer of any of the provisions herewith shall in no way be construed to be a waiver of any such provisions, or the right of Seller thereafter to enforce each and every provision.
14. Seller: For purposes, herein, the term “Seller” shall mean, as appli-cable, ZenPure (Hangzhou), Co., Ltd., ZenPure Corp. and ZenPure Americas, Inc. For purposes of Sections 8, 9 and 12, the term “Seller” shall apply to, and inure to the benefit of, the applicable Seller, and each other entity listed in this Section 14 and their respective parents, affiliates, successors and assigns. Each such other party shall be a third party beneficiary under this Agreement.
TERMS AND CONDITIONS OF SALE
Page 217
ZenPure (Hangzhou) Co., Ltd. 108 10th High-Tech Road, Xiaoshan Qiaonan Industrial Zone Hangzhou, 311231, P. R. China Tel: (86) 571 2288 6800 Fax: (86) 571 2288 6808 Email: [email protected]
ZenPure
ZenPure Corporation Henderson, NV 89016 Tel: (+1) 703-335-9910Fax: (+1) 703-574-8060 email: [email protected]
ZenPure Americas Inc. P.O. Box 597 Manassas, VA 20108 Tel: (+1) 703-335-9910Fax: (+1) 703-574-8060 email: [email protected]
ZenPure Corporation (USA) ZenPure Americas, Inc. (USA) ZenPure (Hangzhou) Co., Ltd.
ZenPure® is a registered trademark of ZenPure Corporation ZenCap® is a registered trademark of ZenPure Corporation PureFlo® is a registered trademark of ZenPure Corporation JALT Technologies® is a registered trademark of ZenPure Corporation
CPC is a Trademark of Colder Products Company LinkTech is a Trademark of LinkTech Corporation Millipore is a Trademark of Millipore Corporation OptiSeal is a Trademark of Millipore Corporation PALL is a Trademark of Pall Corporation SealKleen is a Trademark of Pall Corporation Teflon is a Trademark of DuPont Corporation Viton is a Trademark of DuPont Corporation Walther is a Trademark of Walther Couplings
Trademarks
Page 218
ZenPure Ze
nPur
e Index by Filter Prefix
Descriptin Filter PrefixCatalog Page
Number
MAXX Glass Fiber Element for Bag Filter Housing BMF*** 170Resinator Bag Filter BRB*** 182PureFlo Lenticular Cloud Filter CEP*** 76PureFlo Filtration Discs CN, DP, E, F, M, N, NS, P, HF, S*** 7Portable Filter Bag Cart CUSTOM 204PureFlo D13 Disc Capsule D13R*** 11PureFlo D13U Disc Capsule D13U*** 12PureFlo D25C Disc Capsule D25C*** 13PureFlo D25U Disc Capsule D25U*** 14PureFlo D4 Disc Capsule D4*** 10PureFlo D40C Disc Capsule D40C*** 15PureFlo D50C Disc Capsule D50C*** 16PureFlo Lenticular Cloud D65R Disc Capsule D65CEP*** 70PureFlo D65R Disc Capsule D65R*** 19Silicon Heater for D65 D65-SHS80501 21Stainless Steel Disc Holder DH*** 184Stainless Steel Disc Media Holder DMP*** 185PureFlo EDF Capsule EDF*** 94PureFlo Charged Nylon Mini Cartridge EMN*** 162
PureFlo Charged Nylon Cartridge EPN*** 122PureFlo EPS Cartridge EPS*** 132PureFlo Filter Cups FS*** 8PureFlo G50C Disc Capsule G50C*** 17Band Clamp SS Filter Housing Multi-round GTCHB*** 197Hi-Pro Micro Felt Bag Filter HPM*** 174Industrial Economy Filter Housing Multi-round IE*** 196PureFlo Ink Capsule IFC*** 80Industrial High Purity SS Housing Multi-round IHP*** 195Industrial Stainless Steel Housing IHP01*** 193Industrial High Purity Vent Housing IHP1IV*** 205Industrial High Purity Bag Filter Housing IHPB*** 198ZenPure Media Options Information 5ZenPure Capsule Size Options Information 6ZenPure Vent & Drain Info for SK Capsules Information 28PureFlo Mini Cartridge Configuration Information Information 147Benefits of Electropolishing Information 212Chemical Compatability Table Information 213Terms & Conditions Information 216Trademarks Information 218PureFlo Mini Depth Pleated PP Cartridge JDP*** 152PureFlo Junior Capsule JKL, JNL, JKP*** 22Thermally Bonded PP JT*** 140ZenCap LT and LI Capsule L*** 78ZenCap Lenticular Cloud Capsule L**CEP*** 75Thermally Bonded PP LF-PP** 142PureFlo ZenCap Void Filter Capsule LV*** 89PureFlo Hi Temp PTFE Filter Cartridge w/Hi=Temp PP Construction MBF*** 112PureFlo PES Beverage Grade Cartridge MBS*** 130PureFlo PE Cartridge MCE*** 115PureFlo Mini Lenticular Cloud Filter MCEP*** 74PureFlo PTFE Filter Cartridge MCF*** 106PureFlo Nylon Cartridge MCN*** 116PureFlo Polypropylene membrane Cartridge MCP*** 98PureFlo PES Cartridge MCS*** 124PureFlo PES Biological Reduction Grade Cartridge MCS*** -B 128PureFlo PES Pharma Grade Cartridge MCS*** -PH 126PureFlo General Grade Cartridge MGS*** 134PureFlo Junior Cartridge MJ*** 96PureFlo MKL Capsule MKL, MKP*** 24PureFlo MKL Capsule PE MKPE***-E 26PureFlo PE Mini Cartridge MME*** 158PureFlo PTFE Mini Filter Cartridge MMF*** 154PureFlo Nylon Mini Cartridge MMN*** 160PureFlo Polypro Membrane Mini Cartridge MMP*** 148PureFlo PES Mini Cartridge MMS*** 164
Page 219
ZenPure Ze
nPur
e Index by Filter Prefix
Descriptin Filter PrefixCatalog Page
Number
PureFlo Hi Temp PTFE Filter Cartridge Nylon Construction MNF*** 108PureFlo Nylon Plus Cartridge MNN*** 118PureFlo Charged Nylon Cartridge MPN*** 122PureFlo PES Pharma Grade Cartridge Dual Layer MPS***-PH 126PureFlo Hi Temp PTFE Filter Cartridge w/SS Core MSF*** 110PureFlo All-Nylon Cartridge MSN*** 120PureFlo PE Mini Vent Cartridge MVE*** 156PureFlo PTFE Mini Vent Cartridge MVF*** 156PureFlo Water Grade Cartridge MWS*** 136PureFlo Glass MicroFiber Cartridge NCG*** 138PureFlo Polypropylene Media Cartridge NCP*** 100PureFlo Depth Pleated PP cartrdige NDP*** 102PureFlo Industrial PP Cartridge NIP*** 104PureFlo Glass MicroFiber Mini Cartirdge NMG*** 166Nylon mono-filiment Mesh Bag Filter NMO*** 178PureFlo Polypro Media Mini Cartridge NMP*** 150Nylon Multi-filiment Mesh Bag Filter NMU*** 178Sample & Vent Valves OFSB*** 208Polyester Felt Bag Filter PE*** 176Polyester Chem Bag PE***-CB 180MAXX Polyester Felt Element for Bag Filter Housing PEF*** 171Polyester mono-filiment Mesh Bag Filter PEMO*** 178Polyester Multi-filiment Mesh Bag Filter PEMU*** 178Virgin Polypropylene Housing PHV010*** 186MAXX PP Microfiber Element for Bag Filter Housing PMF*** 169Polypropylene mono-filiment Mesh Bag Filter POMO*** 178Polypropylene Felt Bag Filter PP*** 176Polypropylene Chem Bag PP***-CB 180MAXX PP Felt Element for BaG Filter Housing PPF*** 171MAXX Phenolic Polyester Element for Bag Filter Housing PTP*** 172Sanitary SS Filter Housing Multi-round SAN*** 192Sanitary Stainless Steel Housing SHP01*** 190PureFlo Carbon Fiber/HEPA Capsule SKC***, SKCH***, MKC*** 68PureFlo Tank Vent Purifier SKCL 82PureFlo SKL Series Mini Depth pleated PP Media Capsule SKDP*** 64PureFlo HEPA Capsule SKH*** 66PureFlo SKL Series Lenticular Cloud Capsule SKLCEP*** 73PureFlo SKL Series PE Capsule SKLE*** 56PureFlo SKL Series PTFE Capsule SKLF** 44PureFlo SKL Series Glass MicroFiber Capsule SKLG*** 58PureFlo SKL Series PP Membrane Capsule SKLM*** 61PureFlo SKL Series Nylon Capsule SKLN** 46PureFlo SKL Series Nylon Screen Capsule SKLNS*** 54PureFlo SKL Series PP Media Capsule SKLP*** 62PureFlo SKL Series PES Capsule, Standard Grade SKLS*** 40PureFlo SKL Series PES Capsule, Biological Reduction Grade SKLS***-B 38PureFlo SKL Series PES Capsule, Pharma Grade SKLS***-PH 36PureFlo SKML Mulit-Zone Capsule SKML*** 90PureFlo SKMV Mulit-Zone Capsule SKMV*** 92PureFlo SKV Series Lenticular Cloud Capsule SKVCEP*** 72PureFlo SKV Series PTFE Capsule SKVF** 42PureFlo SKV Series Nylon Capsule SKVN*** 48PureFlo Shower Filter SKVPS*** 84PureFlo SKV Series PES Capsule, Pharma Grade SKVS*** 32PureFlo SKV Series PES Capsule, Pharma Grade, with PE Construction SKVS***-E 34Sanitary Mini Stainless Steel Housing SMP01*** 188PureFlo SNL Series All Nylon Capsule SNLN** 50PureFlo SNV Series All Nylon Capsule SNVN** 52SRH Series Bag Housing SRH*** 202SRL Series Bag Housing SRL*** 200SRM Series Multi-cavity Housing SRM*** 203SRS Series Bag Housing SRS*** 201PureFlo SVL Void Capsule SVL*** 88Sanitary Stainless Steel Vent Housing SVP017*** 206PureFlo SVV Void Capsule SVV*** 87String Wound Filter Cartridge SW*** 144Sanitary Y-Strainer SYS*** 210PureFlo Activated Carbon Fiber WCC*** 143
Page 220
ZenPure
About ZenPure ZenPure Corporation was founded in November 2002, specializing in development and manufacturing of filtration and purification products and specialty membrane devices for a wide range of industries and applications.
ZenPure strives for customer satisfaction and trust by providing reliable, unique, efficient, and cost effective design, development, and manufacturing services to our customers, including OEM and private labeled products.
ZenPure Can offer filters or membrane devices of any size, fitting type, and configuration based on all types of filtration media combinations. All Products are manufactured in a Class 10,000 clean room environment with full material traceability and quality control.
North & South Americas: ZenPure Americas, Inc [email protected] TEL:703-335-9910FAX: 703-574-8060
Asia and other Regions:ZenPure Corporation [email protected] TEL:+86 571 2288 6800 FAX:+86 571 2288 6808
WWW.ZENPURE.COM