Valve terminal systems → Valve terminal systems according to stan-

dard

ISO 5599-1, size 1, Series 581

Brochure

� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standardISO 5599-1, size 1, Series 581

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Valve terminal systems

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

12

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs ▶ Manual override: without detent

16

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, electronic connection module and multiple cable ▶ Manual override: without detent

20

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: D-Sub plug, �5-pin, top ▶ Manual override: without detent

24

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

28

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

32

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: �� mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Electrical connector without standard (form B industry) ▶ Manual override: with detent

36

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: with detent

40

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent, without

44

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs ▶ Manual override: with detent

48

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: with detent

52

3Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standardISO 5599-1, size 1, Series 581

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ compressed air connection output: Base plate ISO 5599-1 56

Single valves, electrically operated, 15 mm pilot valve width

�x3/�-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, 3-pin ▶ Manual override: without detent

60

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, 3-pin ▶ Manual override: without detent

62

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, 3-pin ▶ Manual override: without detent

64

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, 3-pin ▶ Manual override: without detent

66

�x3/�-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 15�17, form C ▶ Manual override: without detent

69

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 15�17, form C ▶ Manual override: without detent

71

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 15�17, form C ▶ Manual override: without detent

73

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 15�17, form C ▶ Manual override: without detent

75

Single valves, electrically operated, 22 mm pilot valve width

�x3/�-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: �� mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent

78

4 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standardISO 5599-1, size 1, Series 581

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: �� mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent

80

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: �� mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent

83

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: �� mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ with differential piston

86

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: �� mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ closed center

89

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: �� mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ exhausted center

92

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: �� mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ pressurized center

95

Single valves, electrically operated, 30 mm pilot valve width

�x3/�-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

98

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

100

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

102

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent ▶ with differential piston

104

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

106

�x3/�-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent

109

5Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standardISO 5599-1, size 1, Series 581

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent

111

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent

113

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent ▶ with differential piston

115

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent

117

�x3/�-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without

120

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without

122

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without

124

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without ▶ with differential piston

126

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x�� mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without

128

�x3/�-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

130

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

132

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

134

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent ▶ with differential piston

136

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

138

� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standardISO 5599-1, size 1, Series 581

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Single valves, electrically operated, ATEX

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Basic valve for CNOMO pilot valve ▶ single solenoid ▶ suitable for ATEX

140

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Basic valve for CNOMO pilot valve ▶ double solenoid ▶ suitable for ATEX

142

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Basic valve for CNOMO pilot valve; with differential piston ▶ suitable for ATEX

144

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Basic valve for CNOMO pilot valve ▶ suitable for ATEX

146

Single valves, pneumatically operated

�x3/�-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Can be assembled into blocks ▶ ATEX certified

148

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Can be assembled into blocks ▶ Single air pilot ▶ ATEX certified

149

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Can be assembled into blocks ▶ double air pilot ▶ ATEX certified

150

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Can be assembled into blocks ▶ Manual override: with detent ▶ ATEX certified

151

5/�-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Can be assembled into blocks ▶ with differential piston ▶ ATEX certified

152

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Can be assembled into blocks ▶ ATEX certified

153

7Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standardISO 5599-1, size 1, Series 581

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Slow-start valves

Slow-start valve▶ Qn = 3300 l/min ▶ Pilot valve width: 15 mm ▶ Manual override: without detent 155

Slow-start valve▶ Qn = 3300 l/min ▶ Pilot valve width: �� mm ▶ Manual override: with detent 157

Slow-start valve▶ Qn = 3300 l/min ▶ Pilot valve width: 30 mm ▶ Manual override: without detent, with detent, without

159

Slow-start valve▶ Qn = 3300 l/min 161

Single subbase, for soft-start valve▶ compressed air connection output: G 1/� 162

Accessories

Modular system, electrical accessories

Electro module▶ Plug, M8, 3-pin ▶ 581, Modular system 163

Connecting cable, Series CN�▶ Plug, M8, 3-pin ▶ 581, Modular system 164

Pilot valve, 15 mm pilot valve width▶ Manual override: without detent ▶ 581, Modular system 164

Pilot valve, 30 mm pilot valve width with CNOMO porting configuration▶ 581, Modular system 166

Pilot valve, �� mm pilot valve width▶ Manual override: with detent ▶ 581, Modular system 168

8 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standardISO 5599-1, size 1, Series 581

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Coil, Series CO1▶ Coil width �� mm ▶ Form B, industry 169

3/�-way valve 171

Control unit for manual override▶ for 581, Modular system 173

Multipole plug▶ Socket, C/� ▶ 581, Modular system 174

Blanking plug▶ for 581, Modular system 174

Modular system, mechanical accessories

valve housing, without cover▶ standard:ISO 5599-1 ▶ for 581, size 1, Aluminum 175

valve housing, without cover▶ standard:ISO 5599-1 ▶ for 581, size 1, Plastic 176

valve cover, with or without pilot valve▶ standard:ISO 5599-1 ▶ for 581, size 1, for electrically operated valves, modular system 177

throttle insert for flow control, Port 3/5▶ for 581, size 1, Modular system 177

plug set for flow control screws▶ for 581, size 1, Modular system 178

Safety plugs for throttle insert▶ for 581, size 1 - 4, Modular system 179

9Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standardISO 5599-1, size 1, Series 581

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Maintenance plate to exchange valve▶ standard:ISO 5599-1 ▶ for 581, size 1 179

Valve cover seal, Valve housing seal▶ for 581, size 1 180

Mecproof, cabinet mounting▶ standard:ISO 5599-1 ▶ for 581, size 1, Modular system 181

Single subbase

Single subbase, thread connections on the side▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/4 ▶ Reversed pressure supply permissible

183

Single subbase, thread connections on the bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/4 ▶ Reversed pressure supply permissible

184

Single subbase, ports on side▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/8 - Ø 8

186

Single subbase, ports on bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/8 - Ø �

187

Subbase, for direct mounting of ISO valves on cylinders▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/8 188

Intermediate and end plates, type F

Intermediate plate, ports � and 4 on bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/4 ▶ Can be assembled into blocks ▶ Single base plate principle ▶ Reversed pressure supply permissible ▶ With collective pilot air exhaust

190

End plate left, End plate right▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Can be assembled into blocks ▶ Base plate principle, multiple ▶ Reversed pressure supply permissible

192

Intermediate and end plates, type G

Intermediate plate, Ports � and 4 side or bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/4 ▶ Can be assembled into blocks

194

End plate left, End plate right▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Can be assembled into blocks ▶ Base plate principle, multiple ▶ Reversed pressure supply permissible ▶ With collective pilot air exhaust

196

Intermediate and end plates, type H

Intermediate plate, Ports � and 4 on side, 1,� and 4 also on bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/4 ▶ Can be assembled into blocks

198

10 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standardISO 5599-1, size 1, Series 581

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

End plate left, End plate right▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Can be assembled into blocks 201

Intermediate and end plates, type K

Intermediate plate, ports � and 4 on bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/8 - Ø � ▶ Can be assembled into blocks

204

Intermediate plate for separate air supply, ports � and 4 on bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/8 - G 1/4 ▶ Can be assembled into blocks

206

End plate left, End plate right▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Can be assembled into blocks 208

Accessories

Blanking plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 210

Blanking plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 211

Throttle plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 212

Pressure regulator for vertical stacking▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Controlled connection: 1, �, 4, �, 4 213

Accessories, type F

Transition plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 - ISO � ▶ Can be assembled into blocks ▶ Reversed pressure supply permissible

215

End plates for adapter plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 - ISO � ▶ Can be assembled into blocks ▶ Reversed pressure supply permissible

217

Supply plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Can be assembled into blocks ▶ Plate principle

218

Seal for supply plate▶ standard:ISO 5599-1 ▶ Frame size:ISO 1 219

Angle subplate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/4 220

11Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standardISO 5599-1, size 1, Series 581

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Blanking piece▶ standard:ISO 5599-1 ▶ Frame size:ISO 1 - ISO 3 221

Accessories, for intermediate plates▶ standard:ISO 5599-1 ▶ Frame size:ISO 1 222

Accessories, type G

Transition plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 - ISO � ▶ Can be assembled into blocks ▶ Reversed pressure supply permissible

223

Supply plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Reversed pressure supply permissible 224

Blanking piece▶ standard:ISO 5599-1 ▶ Frame size:ISO 1 - ISO � 224

Accessories, type H

Supply plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Can be assembled into blocks ▶ Plate principle

226

Seal for supply plate▶ standard:ISO 5599-1 ▶ Frame size:ISO 1 227

Accessories, type K

Transition plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 - ISO � ▶ for ISO 1, ISO � 228

Sealing kit▶ standard:ISO 5599-1 229

Blanking piece, Subbases ISO 5599-1▶ standard:ISO 5599-1 ▶ Frame size:ISO 1 - ISO 3 ▶ for Thread connection on bottom 230

1� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

P581_1�8

Standards ISO 5599-1Version Single plug-in wiringBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 10 barAmbient temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Protection class:�000, with electrical con-nector/plugSingle wire connection, Electri-cal connector

IP �5

DC operating voltage �4 VVoltage tolerance DC -10% / +10%

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Configurable product

This product is configurable. Please use our Internet configurator at www.boschrexroth.com/pneumatics or contact the nearest Bosch Rexroth sales office.

13Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, all ports on bottom

D581_�31_15

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801�80000 can also be connected to port 3 and 5.An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E F G H J K L M N P (=M+Q)G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

Ø � G 1/4 G 1/4 Ø 4 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41Ø 8 G 3/8 G 3/8 Ø � �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

A Q R (=Q/2+M–Z) S V X Z AA T1 U1G 1/8 14 �7.5 �0 7� 5.4 7 8 85 93G 1/4 15 34 �5 94 �.4 8 10 9� 93

Ø � 14 �7.5 �0 7� 5.4 7 – 85 93Ø 8 15 34 �5 94 �.4 8 – 9� 93

A = ports � and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 1� and 14 in the intermediate plate

14 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on bottom, Ports 12 and 14 on side

D581_�3�_15

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E G H1 H2 H3 J K L M N PG 1/4 G 3/8 G 3/8 G 1/8 �8 13 �9 �0 39.5 �� 110 4� �� 43 71

A Q R S V X Z T1 U1G 1/4 �1.5 �4.5 8� �8 7 11 107 93

15Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on side, ports 12 and 14 on bottom

D581_�33_15

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B B1 C D E F G H J R K M N OG 1/4 G 3/8 G 1/4 5.5 11 71 3� �� 9� �4 17 1� 1� 3� ��

A P S T1 U1G 1/4 43 10� 9� 93

1� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

P581_1�9

Standards ISO 5599-1Version Single plug-in wiringBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 10 barAmbient temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Protection class:�000, with electrical con-nector/plug

IP �5

Number of valve positions 1�DC operating voltage �4 VVoltage tolerance DC -10% / +10%cable connection 1 m

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Configurable product

This product is configurable. Please use our Internet configurator at www.boschrexroth.com/pneumatics or contact the nearest Bosch Rexroth sales office.

17Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, all ports on bottom

D581_�31_15

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801�80000 can also be connected to port 3 and 5.An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E F G H J K L M N P (=M+Q)G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

Ø � G 1/4 G 1/4 Ø 4 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41Ø 8 G 3/8 G 3/8 Ø � �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

A Q R (=Q/2+M–Z) S V X Z AA T1 U1G 1/8 14 �7.5 �0 7� 5.4 7 8 85 93G 1/4 15 34 �5 94 �.4 8 10 9� 93

Ø � 14 �7.5 �0 7� 5.4 7 – 85 93Ø 8 15 34 �5 94 �.4 8 – 9� 93

A = ports � and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 1� and 14 in the intermediate plate

18 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on bottom, Ports 12 and 14 on side

D581_�3�_15

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E G H1 H2 H3 J K L M N PG 1/4 G 3/8 G 3/8 G 1/8 �8 13 �9 �0 39.5 �� 110 4� �� 43 71

A Q R S V X Z T1 U1G 1/4 �1.5 �4.5 8� �8 7 11 107 93

19Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on side, ports 12 and 14 on bottom

D581_�33_15

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B B1 C D E F G H J R K M N OG 1/4 G 3/8 G 1/4 5.5 11 71 3� �� 9� �4 17 1� 1� 3� ��

A P S T1 U1G 1/4 43 10� 9� 93

�0 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, electronic connection module and multiple cable ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

P581_13�

Standards ISO 5599-1Version Single plug-in wiringBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 10 barAmbient temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Protection class:�000, with electrical con-nector/plug

IP �7

Number of solenoid coils �0DC operating voltage �4 VVoltage tolerance DC -10% / +10%cable connection 10 m

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Configurable product

This product is configurable. Please use our Internet configurator at www.boschrexroth.com/pneumatics or contact the nearest Bosch Rexroth sales office.

�1Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, electronic connection module and multiple cable ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, all ports on bottom

D581_�31_15

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801�80000 can also be connected to port 3 and 5.An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E F G H J K L M N P (=M+Q)G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

Ø � G 1/4 G 1/4 Ø 4 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41Ø 8 G 3/8 G 3/8 Ø � �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

A Q R (=Q/2+M–Z) S V X Z AA T1 U1G 1/8 14 �7.5 �0 7� 5.4 7 8 85 93G 1/4 15 34 �5 94 �.4 8 10 9� 93

Ø � 14 �7.5 �0 7� 5.4 7 – 85 93Ø 8 15 34 �5 94 �.4 8 – 9� 93

A = ports � and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 1� and 14 in the intermediate plate

�� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, electronic connection module and multiple cable ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on bottom, Ports 12 and 14 on side

D581_�3�_15

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E G H1 H2 H3 J K L M N PG 1/4 G 3/8 G 3/8 G 1/8 �8 13 �9 �0 39.5 �� 110 4� �� 43 71

A Q R S V X Z T1 U1G 1/4 �1.5 �4.5 8� �8 7 11 107 93

�3Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, electronic connection module and multiple cable ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on side, ports 12 and 14 on bottom

D581_�33_15

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B B1 C D E F G H J R K M N OG 1/4 G 3/8 G 1/4 5.5 11 71 3� �� 9� �4 17 1� 1� 3� ��

A P S T1 U1G 1/4 43 10� 9� 93

�4 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: D-Sub plug, 25-pin, top ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

P581_153

Standards ISO 5599-1Version MultipoleBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 10 barAmbient temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Protection class:�000, with electrical con-nector/plug

IP �5

Number of solenoid coils 10DC operating voltage �4 VVoltage tolerance DC -10% / +10%

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Configurable product

This product is configurable. Please use our Internet configurator at www.boschrexroth.com/pneumatics or contact the nearest Bosch Rexroth sales office.

�5Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: D-Sub plug, 25-pin, top ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, all ports on bottom

D581_�31_15

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801�80000 can also be connected to port 3 and 5.An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E F G H J K L M N P (=M+Q)G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

Ø � G 1/4 G 1/4 Ø 4 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41Ø 8 G 3/8 G 3/8 Ø � �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

A Q R (=Q/2+M–Z) S V X Z AA T1 U1G 1/8 14 �7.5 �0 7� 5.4 7 8 85 93G 1/4 15 34 �5 94 �.4 8 10 9� 93

Ø � 14 �7.5 �0 7� 5.4 7 – 85 93Ø 8 15 34 �5 94 �.4 8 – 9� 93

A = ports � and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 1� and 14 in the intermediate plate

�� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: D-Sub plug, 25-pin, top ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on bottom, Ports 12 and 14 on side

D581_�3�_15

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E G H1 H2 H3 J K L M N PG 1/4 G 3/8 G 3/8 G 1/8 �8 13 �9 �0 39.5 �� 110 4� �� 43 71

A Q R S V X Z T1 U1G 1/4 �1.5 �4.5 8� �8 7 11 107 93

�7Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: D-Sub plug, 25-pin, top ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on side, ports 12 and 14 on bottom

D581_�33_15

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B B1 C D E F G H J R K M N OG 1/4 G 3/8 G 1/4 5.5 11 71 3� �� 9� �4 17 1� 1� 3� ��

A P S T1 U1G 1/4 43 10� 9� 93

�8 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

P581_198

Standards ISO 5599-1Bus module F-designVersion Field busBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 10 barAmbient temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Protection class:, with plug IP �5Number of solenoid coils 1�Operational voltage electronics �4 V DCElectronics voltage tolerance -10% / +10%

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Configurable product

This product is configurable. Please use our Internet configurator at www.boschrexroth.com/pneumatics or contact the nearest Bosch Rexroth sales office.

�9Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, all ports on bottom

D581_�31_15

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801�80000 can also be connected to port 3 and 5.An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E F G H J K L M N P (=M+Q)G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

Ø � G 1/4 G 1/4 Ø 4 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41Ø 8 G 3/8 G 3/8 Ø � �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

A Q R (=Q/2+M–Z) S V X Z AA T1 U1G 1/8 14 �7.5 �0 7� 5.4 7 8 85 93G 1/4 15 34 �5 94 �.4 8 10 9� 93

Ø � 14 �7.5 �0 7� 5.4 7 – 85 93Ø 8 15 34 �5 94 �.4 8 – 9� 93

A = ports � and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 1� and 14 in the intermediate plate

30 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on bottom, Ports 12 and 14 on side

D581_�3�_15

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E G H1 H2 H3 J K L M N PG 1/4 G 3/8 G 3/8 G 1/8 �8 13 �9 �0 39.5 �� 110 4� �� 43 71

A Q R S V X Z T1 U1G 1/4 �1.5 �4.5 8� �8 7 11 107 93

31Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on side, ports 12 and 14 on bottom

D581_�33_15

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B B1 C D E F G H J R K M N OG 1/4 G 3/8 G 1/4 5.5 11 71 3� �� 9� �4 17 1� 1� 3� ��

A P S T1 U1G 1/4 43 10� 9� 93

3� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

P581_131

Standards ISO 5599-1Bus module C-designVersion Field busBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 10 barAmbient temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Protection class:, with plug IP �5Number of valve positions 1�Supported field bus protocols: Profibus DP

INTERBUS-S CANopen DeviceNet

Operational voltage electronics �4 V DCElectronics voltage tolerance -10% / +10%cable connection 1 m

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.■ Profibus DP, 1�8 inputs/outputs■ INTERBUS S, CANopen, DeviceNet, �4 inputs/outputs■ Bus module optionally included in scope of delivery, see the Internet configurator

Configurable product

This product is configurable. Please use our Internet configurator at www.boschrexroth.com/pneumatics or contact the nearest Bosch Rexroth sales office.

33Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, all ports on bottom

D581_�31_15

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801�80000 can also be connected to port 3 and 5.An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E F G H J K L M N P (=M+Q)G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

Ø � G 1/4 G 1/4 Ø 4 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41Ø 8 G 3/8 G 3/8 Ø � �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

A Q R (=Q/2+M–Z) S V X Z AA T1 U1G 1/8 14 �7.5 �0 7� 5.4 7 8 85 93G 1/4 15 34 �5 94 �.4 8 10 9� 93

Ø � 14 �7.5 �0 7� 5.4 7 – 85 93Ø 8 15 34 �5 94 �.4 8 – 9� 93

A = ports � and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 1� and 14 in the intermediate plate

34 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on bottom, Ports 12 and 14 on side

D581_�3�_15

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E G H1 H2 H3 J K L M N PG 1/4 G 3/8 G 3/8 G 1/8 �8 13 �9 �0 39.5 �� 110 4� �� 43 71

A Q R S V X Z T1 U1G 1/4 �1.5 �4.5 8� �8 7 11 107 93

35Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on side, ports 12 and 14 on bottom

D581_�33_15

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B B1 C D E F G H J R K M N OG 1/4 G 3/8 G 1/4 5.5 11 71 3� �� 9� �4 17 1� 1� 3� ��

A P S T1 U1G 1/4 43 10� 9� 93

3� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Electrical connector without standard (form B industry) ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

P581_137

Standards ISO 5599-1Version Single plug-in wiringBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 10 barAmbient temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Protection class:�000, with electrical con-nector/plug

IP �5

DC operating voltage �4 VVoltage tolerance DC -10% / +10%Operational voltage AC at 50 Hz �30 V, 110 V, �4 VVoltage tolerance AC 50 Hz -10% / +10%

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Configurable product

This product is configurable. Please use our Internet configurator at www.boschrexroth.com/pneumatics or contact the nearest Bosch Rexroth sales office.

37Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Electrical connector without standard (form B industry) ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, all ports on bottom

D581_�31_��

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801�80000 can also be connected to port 3 and 5.An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E F G H J K L M N P (=M+Q)G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

Ø � G 1/4 G 1/4 Ø 4 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41Ø 8 G 3/8 G 3/8 Ø � �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

A Q R (=Q/2+M–Z) S V X Z AA T2 U2G 1/8 14 �7.5 �0 7� 5.4 7 8 113 70G 1/4 15 34 �5 94 �.4 8 10 119 70

Ø � 14 �7.5 �0 7� 5.4 7 – 113 70Ø 8 15 34 �5 94 �.4 8 – 119 70

A = ports � and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 1� and 14 in the intermediate plate

38 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Electrical connector without standard (form B industry) ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on bottom, Ports 12 and 14 on side

D581_�3�_��

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E G H1 H2 H3 J K L M N PG 1/4 G 3/8 G 3/8 G 1/8 �8 13 �9 �0 39.5 �� 110 4� �� 43 71

A Q R S V X Z T2 U2G 1/4 �1.5 �4.5 81 �8 7 11 134 �8

39Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Electrical connector without standard (form B industry) ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on side, ports 12 and 14 on bottom

D581_�33_��

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B B1 C D E F G H J R K M N OG 1/4 G 3/8 G 1/4 5.5 11 71 3� �� 9� �4 17 1� 1� 3� ��

A P S T2 U2G 1/4 43 10� 1�4 70

40 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

P581_138

Standards ISO 5599-1Version Single plug-in wiringBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 10 barAmbient temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Protection class:�000, with electrical con-nector/plugSingle wire connection, Electri-cal connector

IP �5

DC operating voltage �4 VVoltage tolerance DC -10% / +10%Operational voltage AC at 50 Hz �30 VVoltage tolerance AC 50 Hz -10% / +10%

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Configurable product

This product is configurable. Please use our Internet configurator at www.boschrexroth.com/pneumatics or contact the nearest Bosch Rexroth sales office.

41Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, all ports on bottom

D581_�31_30

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801�80000 can also be connected to port 3 and 5.An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E F G H J K L M N P (=M+Q)G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

Ø � G 1/4 G 1/4 Ø 4 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41Ø 8 G 3/8 G 3/8 Ø � �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

A Q R (=Q/2+M–Z) S V X Z AA T3 U3G 1/8 14 �7.5 �0 7� 5.4 7 8 100 174G 1/4 15 34 �4 94 �.4 8 10 101 174

Ø � 14 �7.5 �0 7� 5.4 7 – 100 174Ø 8 15 34 �4 94 �.4 8 – 101 174

A = ports � and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 1� and 14 in the intermediate plate

4� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on bottom, Ports 12 and 14 on side

D581_�3�_30

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E G H1 H2 H3 J K L M N PG 1/4 G 3/8 G 3/8 G 1/8 �8 13 �9 �0 39.5 �� 110 4� �� 43 71

A Q R S V X Z T3 U3G 1/4 �1.5 �4.5 81 �8 7 11 1�1 174

43Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on side, ports 12 and 14 on bottom

D581_�33_30

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B B1 C D E F G H J R K M N OG 1/4 G 3/8 G 1/4 5.5 11 71 3� �� 9� �4 17 1� 1� 3� ��

A P S T3 U3G 1/4 43 10� 111 174

44 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent, without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

P581_138

Standards ISO 5599-1Version Single plug-in wiringBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 1� barAmbient temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Protection class:�000, with electrical con-nector/plugSingle wire connection, Electri-cal connector

IP �5

DC operating voltage �4 VVoltage tolerance DC -10% / +10%Operational voltage AC at 50 Hz �30 V, 4� VVoltage tolerance AC 50 Hz -10% / +10%

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Configurable product

This product is configurable. Please use our Internet configurator at www.boschrexroth.com/pneumatics or contact the nearest Bosch Rexroth sales office.

45Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent, without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, all ports on bottom

D581_�31_30

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801�80000 can also be connected to port 3 and 5.An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E F G H J K L M N P (=M+Q)G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

Ø � G 1/4 G 1/4 Ø 4 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41Ø 8 G 3/8 G 3/8 Ø � �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

A Q R (=Q/2+M–Z) S V X Z AA T3 U3G 1/8 14 �7.5 �0 7� 5.4 7 8 100 174G 1/4 15 34 �4 94 �.4 8 10 101 174

Ø � 14 �7.5 �0 7� 5.4 7 – 100 174Ø 8 15 34 �4 94 �.4 8 – 101 174

A = ports � and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 1� and 14 in the intermediate plate

4� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent, without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on bottom, Ports 12 and 14 on side

D581_�3�_30

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E G H1 H2 H3 J K L M N PG 1/4 G 3/8 G 3/8 G 1/8 �8 13 �9 �0 39.5 �� 110 4� �� 43 71

A Q R S V X Z T3 U3G 1/4 �1.5 �4.5 81 �8 7 11 1�1 174

47Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: without detent, without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on side, ports 12 and 14 on bottom

D581_�33_30

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B B1 C D E F G H J R K M N OG 1/4 G 3/8 G 1/4 5.5 11 71 3� �� 9� �4 17 1� 1� 3� ��

A P S T3 U3G 1/4 43 10� 111 174

48 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

P581_�01

Standards ISO 5599-1Version Single plug-in wiringBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 10 barAmbient temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Protection class:�000, with electrical con-nector/plug

IP �5

Number of valve positions �0DC operating voltage �4 VVoltage tolerance DC -10% / +10%cable connection 1 m

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Configurable product

This product is configurable. Please use our Internet configurator at www.boschrexroth.com/pneumatics or contact the nearest Bosch Rexroth sales office.

49Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, all ports on bottom

D581_�31_30

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801�80000 can also be connected to port 3 and 5.An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E F G H J K L M N P (=M+Q)G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

Ø � G 1/4 G 1/4 Ø 4 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41Ø 8 G 3/8 G 3/8 Ø � �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

A Q R (=Q/2+M–Z) S V X Z AA T3 U3G 1/8 14 �7.5 �0 7� 5.4 7 8 100 174G 1/4 15 34 �4 94 �.4 8 10 101 174

Ø � 14 �7.5 �0 7� 5.4 7 – 100 174Ø 8 15 34 �4 94 �.4 8 – 101 174

A = ports � and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 1� and 14 in the intermediate plate

50 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on bottom, Ports 12 and 14 on side

D581_�3�_30

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E G H1 H2 H3 J K L M N PG 1/4 G 3/8 G 3/8 G 1/8 �8 13 �9 �0 39.5 �� 110 4� �� 43 71

A Q R S V X Z T3 U3G 1/4 �1.5 �4.5 81 �8 7 11 1�1 174

51Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on side, ports 12 and 14 on bottom

D581_�33_30

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B B1 C D E F G H J R K M N OG 1/4 G 3/8 G 1/4 5.5 11 71 3� �� 9� �4 17 1� 1� 3� ��

A P S T3 U3G 1/4 43 10� 111 174

5� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

P581_�0�

Standards ISO 5599-1Bus module C-designVersion Field busBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 10 barAmbient temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Protection class:, with plug IP �5Number of solenoid coils 1�Supported field bus protocols: Profibus DP

INTERBUS-S CANopen DeviceNet

Operational voltage electronics �4 V DCElectronics voltage tolerance -10% / +10%

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.■ Profibus DP, 1�8 inputs/outputs■ INTERBUS S, CANopen, DeviceNet, �4 inputs/outputs■ Bus module optionally included in scope of delivery, see the Internet configurator

Configurable product

This product is configurable. Please use our Internet configurator at www.boschrexroth.com/pneumatics or contact the nearest Bosch Rexroth sales office.

53Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, all ports on bottom

D581_�31_30

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801�80000 can also be connected to port 3 and 5.An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E F G H J K L M N P (=M+Q)G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

Ø � G 1/4 G 1/4 Ø 4 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41Ø 8 G 3/8 G 3/8 Ø � �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

A Q R (=Q/2+M–Z) S V X Z AA T3 U3G 1/8 14 �7.5 �0 7� 5.4 7 8 100 174G 1/4 15 34 �4 94 �.4 8 10 101 174

Ø � 14 �7.5 �0 7� 5.4 7 – 100 174Ø 8 15 34 �4 94 �.4 8 – 101 174

A = ports � and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 1� and 14 in the intermediate plate

54 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on bottom, Ports 12 and 14 on side

D581_�3�_30

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E G H1 H2 H3 J K L M N PG 1/4 G 3/8 G 3/8 G 1/8 �8 13 �9 �0 39.5 �� 110 4� �� 43 71

A Q R S V X Z T3 U3G 1/4 �1.5 �4.5 81 �8 7 11 1�1 174

55Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581, size 1▶ Qn = 1100 l/min ▶ Pilot valve width: 30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on side, ports 12 and 14 on bottom

D581_�33_30

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B B1 C D E F G H J R K M N OG 1/4 G 3/8 G 1/4 5.5 11 71 3� �� 9� �4 17 1� 1� 3� ��

A P S T3 U3G 1/4 43 10� 111 174

5� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ compressed air connection output: Base plate ISO 5599-1

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

P581_134

Standards ISO 5599-1Version pneumatically controlledBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 1� barAmbient temperature min./max. -�0°C / +70°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Configurable product

This product is configurable. Please use our Internet configurator at www.boschrexroth.com/pneumatics or contact the nearest Bosch Rexroth sales office.

57Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ compressed air connection output: Base plate ISO 5599-1

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, all ports on bottom

D581_�31_pn

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801�80000 can also be connected to port 3 and 5.An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E F G H J K L M N P (=M+Q)G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

Ø � G 1/4 G 1/4 Ø 4 �� �8.5 9.5 �9.5 14.5 100 �5 �7 43 41Ø 8 G 3/8 G 3/8 Ø � �7 40 1�.5 ��.5 �0 1�� 30 34 43 49

A Q R (=Q/2+M–Z) S V X Z AA U2G 1/8 14 �7.5 �0 7� 5.4 7 8 70G 1/4 15 34 �5 94 �.4 8 10 70

Ø � 14 �7.5 �0 7� 5.4 7 – 70Ø 8 15 34 �5 94 �.4 8 – 70

A = ports � and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 1� and 14 in the intermediate plate

58 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ compressed air connection output: Base plate ISO 5599-1

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on bottom, Ports 12 and 14 on side

D581_�3�_pn

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B C D E G H1 H2 H3 J K L M N PG 1/4 G 3/8 G 3/8 G 1/8 �8 13 �9 �0 39.5 �� 110 4� �� 43 71

A Q R S V X Z U2G 1/4 �1.5 �4.5 81 �8 7 11 70

59Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Valve terminal system, Series 581▶ Qn = 1100 l/min ▶ compressed air connection output: Base plate ISO 5599-1

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, ports 2 and 4 on side, ports 12 and 14 on bottom

D581_�33_pn

* n = Number of subbasesAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

A B B1 C D E F G H J R K M N OG 1/4 G 3/8 G 1/4 5.5 11 71 3� �� 9� �4 17 1� 1� 3� ��

A P S U2G 1/4 43 10� 70

�0 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, 3-pin ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

001308�4

Standards ISO 5599-1Version Spool valvePilot externalSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. 0 bar / 8 barAmbient temperature min./max. -10°C / +50°CMedium temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �7

Protective circuit Z-diodeProtected against polarity reversal

Status display LED GreenDuty cycle 100 %Switch-on time 15 msSwitch-off time �� msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption

DC DC DCW

�4 V -10% / +10% �.�

�1Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, 3-pin ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Control pressure min./max.

Cable length

Weight Part No.

DC C[l/(s*bar)] [l/min] [bar] [m] [kg]

NC/NC �4 V 3.� 950 3.5 / 80.35

0.��R402003703

0.5 R4020037040.7 R402003705

MO = Manual overrideConnection 1� must be connected with atmospheresThe valve must be supplied with compressed air via ports 3 and 5Nominal flow Qn at � bar and Δp = 1 bar

Dimensions92,6

55,7

5

70

1)3)2)

40

38,8

001�935�

Pin assignment 1) brown (+�4 V) �) green/yellow (ground) 3) blue (0 V)

�� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, 3-pin ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

001308�5

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -10°C / +50°CMedium temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �7

Protective circuit Z-diodeProtected against polarity reversal

Status display LED GreenDuty cycle 100 %Switch-on time 15 msSwitch-off time 30 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption

DC DC DCW

�4 V -10% / +10% �.�

�3Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, 3-pin ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operat-ing

voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Cable length

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [m] [kg]

�4 V 5.� 1400 3 / 10 3 / 10 0.5 0.18 1) 5811150160

�4 V 5.� 1400 3 / 10 3 / 10 0.5 0.18 1); 3) 5811151160

�4 V 5.� 1400 -0.95 / 10 3 / 10 0.5 0.18 �) 5811152160

�4 V 5.� 1400 -0.95 / 10 3 / 10 0.5 0.18 �); 3) 5811153160

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleConnection 1� must be connected with atmospheresNominal flow Qn at � bar and Δp = 1 bar

Dimensions

46,3

55,7

5

70 40

38,8

1)

3)2)

001�9351

Pin assignment 1) brown (+�4 V) �) green/yellow (ground) 3) blue (0 V)

�4 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, 3-pin ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

001308��

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -10°C / +50°CMedium temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �7

Protective circuit Z-diodeProtected against polarity reversal

Status display LED GreenDuty cycle 100 %Switch-on time 14 msSwitch-off time 14 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption

DC DC DCW

�4 V -10% / +10% �.�

�5Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, 3-pin ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operat-ing

voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Cable length

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [m] [kg]

�4 V 5.� 1400 1.5 / 10 1.5 / 10 0.5 0.�� 1) 5811260160

�4 V 5.� 1400 1.5 / 10 1.5 / 10 0.5 0.�� 1); 3) 5811261160

�4 V 5.� 1400 -0.95 / 10 1.5 / 10 0.5 0.�� �) 5811262160

�4 V 5.� 1400 -0.95 / 10 1.5 / 10 0.5 0.�� �); 3) 5811263160

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleConnection 1� must be connected with atmospheresNominal flow Qn at � bar and Δp = 1 bar

Dimensions

92,6

55,7

5

70

1)3)2)

40

38,8

001�935�

Pin assignment 1) brown (+�4 V) �) green/yellow (ground) 3) blue (0 V)

�� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, 3-pin ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

001308�7

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -10°C / +50°CMedium temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �7

Protective circuit Z-diodeProtected against polarity reversal

Status display LED GreenDuty cycle 100 %Switch-on time 14 msSwitch-off time �� msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption

DC DC DCW

�4 V -10% / +10% �.�

�7Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, 3-pin ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operat-ing

voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Cable length

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [m] [kg]

�4 V 4.3 1100 3 / 10 3 / 10 0.5 0.�� 1) 5811460160

�4 V 4.3 1100 3 / 10 3 / 10 0.5 0.�� 1); 3) 5811461160

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.5 0.�� �) 5811462160

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.5 0.�� �); 3) 5811463160

�4 V 4.3 1100 3 / 10 3 / 10 0.5 0.�� 1) 5811560160

�4 V 4.3 1100 3 / 10 3 / 10 0.5 0.�� 1); 3) 5811561160

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.5 0.�� �) 5811562160

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.5 0.�� �); 3) 5811563160

�4 V 4.3 1100 3 / 10 3 / 10 0.5 0.�� 1) 5811760160

�4 V 4.3 1100 3 / 10 3 / 10 0.5 0.�� 1); 3) 5811761160

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.5 0.�� �) 5811762160

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.5 0.�� �); 3) 5811763160

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleConnection 1� must be connected with atmospheresNominal flow Qn at � bar and Δp = 1 bar

�8 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, 3-pin ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

92,6

55,7

5

70

1)3)2)

40

38,8

001�935�

Pin assignment 1) brown (+�4 V) �) green/yellow (ground) 3) blue (0 V)

�9Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 15217, form C ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

00130830

Standards ISO 5599-1Version Spool valvePilot externalSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. 0 bar / 8 barAmbient temperature min./max. -10°C / +50°CMedium temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 15 msSwitch-off time �� msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption

DC DC DCW

�4 V -10% / +10% �

MO Operating voltage

Flow conduc-tance

Qn Control pres-sure

min./max.

Weight Part No.

DC C[l/(s*bar)] [l/min] [bar] [kg]

NC/NC �4 V 3.� 950 3.5 / 8 0.�� R402003702

MO = Manual overrideConnection 1� must be connected with atmospheresThe valve must be supplied with compressed air via ports 3 and 5Nominal flow Qn at � bar and Δp = 1 bar

70 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 15217, form C ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

8

15

38,8

4070

82,2

59,5

00130�80

71Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 15217, form C ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

001308�9

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -10°C / +50°CMedium temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 15 msSwitch-off time 30 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption

DC DC DCW

�4 V -10% / +10% �

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 5.� 1400 3 / 10 3 / 10 0.18 1) 5811150130

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleConnection 1� must be connected with atmospheresNominal flow Qn at � bar and Δp = 1 bar

7� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 15217, form C ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 5.� 1400 3 / 10 3 / 10 0.18 1); 3) 5811151130

�4 V 5.� 1400 -0.95 / 10 3 / 10 0.18 �) 5811152130

�4 V 5.� 1400 -0.95 / 10 3 / 10 0.18 �); 3) 5811153130

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleConnection 1� must be connected with atmospheresNominal flow Qn at � bar and Δp = 1 bar

Dimensions

8

15

38,8

4070

41,1

59,5

00130�81

73Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 15217, form C ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

00130831

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -10°C / +50°CMedium temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 14 msSwitch-off time 14 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption

DC DC DCW

�4 V -10% / +10% �

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 5.� 1400 1.5 / 10 1.5 / 10 0.�� 1) 5811260130

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleConnection 1� must be connected with atmospheresNominal flow Qn at � bar and Δp = 1 bar

74 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 15217, form C ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 5.� 1400 1.5 / 10 1.5 / 10 0.�� 1); 3) 5811261130

�4 V 5.� 1400 -0.95 / 10 1.5 / 10 0.�� �) 5811262130

�4 V 5.� 1400 -0.95 / 10 1.5 / 10 0.�� �); 3) 5811263130

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleConnection 1� must be connected with atmospheresNominal flow Qn at � bar and Δp = 1 bar

Dimensions

8

15

38,8

4070

82,2

59,5

00130�80

75Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 15217, form C ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

00130831

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -10°C / +50°CMedium temperature min./max. -10°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 14 msSwitch-off time �� msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption

DC DC DCW

�4 V -10% / +10% �

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 4.3 1100 3 / 10 3 / 10 0.�� 1) 5811460130

�4 V 4.3 1100 3 / 10 3 / 10 0.�� 1); 3) 5811461130

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleConnection 1� must be connected with atmospheresNominal flow Qn at � bar and Δp = 1 bar

7� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 15217, form C ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.�� �) 5811462130

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.�� �); 3) 5811463130

�4 V 4.3 1100 3 / 10 3 / 10 0.�� 1) 5811560130

�4 V 4.3 1100 3 / 10 3 / 10 0.�� 1); 3) 5811561130

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.�� �) 5811562130

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.�� �); 3) 5811563130

�4 V 4.3 1100 3 / 10 3 / 10 0.�� 1) 5811760130

�4 V 4.3 1100 3 / 10 3 / 10 0.�� 1); 3) 5811761130

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.�� �) 5811762130

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.�� �); 3) 5811763130

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleConnection 1� must be connected with atmospheresNominal flow Qn at � bar and Δp = 1 bar

77Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 15 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 15217, form C ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

8

15

38,8

4070

82,2

59,5

00130�80

78 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013083�

Standards ISO 5599-1Version Spool valvePilot externalSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. 0 bar / 8 barAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 1� msSwitch-off time �� msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power con-sumption

Switch-on power

Holding power

DC AC 50 Hz AC 60 Hz DC AC 50 Hz AC 60 Hz DC AC 50 Hz

AC 60 Hz

AC 50 Hz

AC 60 Hz

W VA VA VA VA1� V - - -10% / +10% - - 5 - - - -

- �4 V - - -10% / +10% - - 10 - 8 -�4 V - - -10% / +10% - - 5 - - - -48 V - - -10% / +10% - - 5 - - - -

- - 110 V - - -10% / +10% - - 10 - 8- �30 V - - -10% / +10% - - 10 - 8 -

79Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz

AC 60 Hz

C

[l/(s*bar)] [l/min] [bar] [kg]

NC/NC

1� V - -

3.� 950 3.5 / 8 0.3

- R402003714- �4 V - - R402003711

�4 V - - - R40200371048 V - - - R402003715

- - 110 V - R402003712- �30 V - - R402003713- - - 1) R402003709

MO = Manual override1) Basic valve without coilThe valve must be supplied with compressed air via ports 3 and 5Nominal flow Qn at � bar and Δp = 1 bar

Dimensions

4022

70

35,2

5,3

87,5

17 34

0013���4

The pilot valves can be loosened and turned through 180°.

80 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

00130833

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 1� msSwitch-off time �5 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power con-sumption

Switch-on power

Holding power

DC AC 50 Hz AC 60 Hz DC AC 50 Hz AC 60 Hz DC AC 50 Hz

AC 60 Hz

AC 50 Hz

AC 60 Hz

W VA VA VA VA1� V - - -10% / +10% - - 5 - - - -

- �4 V - - -10% / +10% - - 10 - 8 -�4 V - - -10% / +10% - - 5 - - - -48 V - - -10% / +10% - - 5 - - - -

- - 110 V - - -10% / +10% - - 10 - 8- �30 V - - -10% / +10% - - 10 - 8 -

81Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure

min./max.

Control pressure

min./max.

Weight Note Part No.

DC AC 50 Hz

AC 60 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]1� V - -

5.� 1400 3 / 10 3 / 10 0.�3 1)

5811110500- �4 V - 5811110200

�4 V - - 581111010048 V - - 5811110600

- - 110 V 5811110300- �30 V - 5811110400

- - - - 5.� 1400 3 / 10 3 / 10 0.�3 1); 3) 5811110000

1� V - -

5.� 1400 3 / 10 3 / 10 0.�3 1); 4)

5811111500- �4 V - 5811111200

�4 V - - 581111110048 V - - 5811111600

- - 110 V 5811111300- �30 V - 5811111400

- - - - 5.� 1400 3 / 10 3 / 10 0.�3 1); 3); 4) 5811111000

1� V - -

5.� 1400 -0.95 / 10 3 / 10 0.�3 �)

5811112500- �4 V - 5811112200

�4 V - - 581111210048 V - - 5811112600

- - 110 V 5811112300- �30 V - 5811112400

- - - - 5.� 1400 -0.95 / 10 3 / 10 0.�3 �); 3) 5811112000

1� V - -

5.� 1400 -0.95 / 10 3 / 10 0.�3 �); 4)

5811113500- �4 V - 5811113200

48 V - - 5811113600�4 V - - 5811113100

- - 110 V 5811113300- �30 V - 5811113400

- - - - 5.� 1400 -0.95 / 10 3 / 10 0.�3 �); 3); 4) 5811113000

MO = Manual override1) Pilot: internal�) Pilot: external3) Basic valve without coil4) with throttleConnection 1� must be connected with atmospheresNominal flow Qn at � bar and Δp = 1 bar

8� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

4022

70

35,2

5,3

87,5

17 52

0013����

The pilot valves can be loosened and turned through 180°.

83Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�080

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 13 msSwitch-off time 13 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power con-sumption

Switch-on power

Holding power

DC AC 50 Hz AC 60 Hz DC AC 50 Hz AC 60 Hz DC AC 50 Hz

AC 60 Hz

AC 50 Hz

AC 60 Hz

W VA VA VA VA1� V - - -10% / +10% - - 5 - - - -

- �4 V - - -10% / +10% - - 10 - 8 -�4 V - - -10% / +10% - - 5 - - - -48 V - - -10% / +10% - - 5 - - - -

- - 110 V - - -10% / +10% - - 10 - 8- �30 V - - -10% / +10% - - 10 - 8 -

84 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure

min./max.

Control pressure

min./max.

Weight Note Part No.

DC AC 50 Hz

AC 60 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]1� V - -

5.� 1400 1.5 / 10 1.5 / 10 0.3 1)

5811220500- �4 V - 5811220200

�4 V - - 581122010048 V - - 5811220600

- - 110 V 5811220300- �30 V - 5811220400

- - - - 5.� 1400 1.5 / 10 1.5 / 10 0.3 1); 3) 5811220000

1� V - -

5.� 1400 1.5 / 10 1.5 / 10 0.3 1); 4)

5811221500- �4 V - 5811221200

�4 V - - 581122110048 V - - 5811221600

- - 110 V 5811221300- �30 V - 5811221400

- - - - 5.� 1400 1.5 / 10 1.5 / 10 0.3 1); 3); 4) 5811221000

1� V - -

5.� 1400 -0.95 / 10 1.5 / 10 0.3 �)

5811222500- �4 V - 5811222200

�4 V - - 581122210048 V - - 5811222600

- - 110 V 5811222300- �30 V - 5811222400

- - - - 5.� 1400 -0.95 / 10 1.5 / 10 0.3 �); 3) 5811222000

1� V - -

5.� 1400 -0.95 / 10 1.5 / 10 0.3 �); 4)

5811223500- �4 V - 5811223200

�4 V - - 581122310048 V - - 5811223600

- - 110 V 5811223300- �30 V - 5811223400

- - - - 5.� 1400 -0.95 / 10 1.5 / 10 0.3 �); 3); 4) 5811223000

MO = Manual override1) Pilot: internal�) Pilot: external3) Basic valve without coil4) with throttleNominal flow Qn at � bar and Δp = 1 bar

85Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

4022

70

35,2

5,3

87,5

17 34

0013���4

The pilot valves can be loosened and turned through 180°.

8� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ with differential piston

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�139

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 1� msSwitch-off time �5 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power con-sumption

Switch-on power

Holding power

DC AC 50 Hz AC 60 Hz DC AC 50 Hz AC 60 Hz DC AC 50 Hz

AC 60 Hz

AC 50 Hz

AC 60 Hz

W VA VA VA VA1� V - - -10% / +10% - - 5 - - - -

- �4 V - - -10% / +10% - - 10 - 8 -�4 V - - -10% / +10% - - 5 - - - -48 V - - -10% / +10% - - 5 - - - -

- - 110 V - - -10% / +10% - - 10 - 8- �30 V - - -10% / +10% - - 10 - 8 -

87Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ with differential piston

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure

min./max.

Control pressure

min./max.

Weight Note Part No.

DC AC 50 Hz

AC 60 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]1� V - -

5.� 1400 1.3 / 10 1.3 / 10 0.�� 1)

5811610500- �4 V - 5811610200

�4 V - - 581161010048 V - - 5811610600

- - 110 V 5811610300- �30 V - 5811610400

- - - 5.� 1400 1.3 / 10 1.3 / 10 0.�� 1); 3) 5811610000

1� V - -

5.� 1400 1.3 / 10 1.3 / 10 0.�� 1); 4)

5811611500- �4 V - 5811611200

�4 V - - 581161110048 V - - 5811611600

- - 110 V 5811611300- �30 V - 5811611400

- - - 5.� 1400 1.3 / 10 1.3 / 10 0.�� 1); 3); 4) 5811611000

1� V - -

5.� 1400 -0.95 / 10 1.3 / 10 0.�� �)

5811612500- �4 V - 5811612200

�4 V - - 581161210048 V - - 5811612600

- - 110 V 5811612300- �30 V - 5811612400

- - - 5.� 1400 -0.95 / 10 1.3 / 10 0.�� �); 3) 5811612000

1� V - -

5.� 1400 -0.95 / 10 1.3 / 10 0.�� �); 4)

5811613500- �4 V - 5811613200

�4 V - - 581161310048 V - - 5811613600

- - 110 V 5811613300- �30 V - 5811613400

- - - 5.� 1400 -0.95 / 10 1.3 / 10 0.�� �); 3); 4) 5811613000

MO = Manual override1) Pilot: internal�) Pilot: external3) Basic valve without coil4) with throttleDifferential piston, signal 14 has priorityNominal flow Qn at � bar and Δp = 1 bar

88 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ with differential piston

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

4022

70

35,2

Ø26

5,3

87,5

17 52

27,50013���3

The pilot valves can be loosened and turned through 180°.

89Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ closed center

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�140

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 15 msSwitch-off time �� msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power con-sumption

Switch-on power

Holding power

DC AC 50 Hz AC 60 Hz DC AC 50 Hz AC 60 Hz DC AC 50 Hz

AC 60 Hz

AC 50 Hz

AC 60 Hz

W VA VA VA VA1� V - - -10% / +10% - - 5 - - - -

- �4 V - - -10% / +10% - - 10 - 8 -�4 V - - -10% / +10% - - 5 - - - -48 V - - -10% / +10% - - 5 - - - -

- - 110 V - - -10% / +10% - - 10 - 8- �30 V - - -10% / +10% - - 10 - 8 -

90 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ closed center

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure

min./max.

Control pressure

min./max.

Weight Note Part No.

DC AC 50 Hz

AC 60 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]1� V - -

4.3 1100 3 / 10 3 / 10 0.3 1)

5811420500- �4 V - 5811420200

�4 V - - 581142010048 V - - 5811420600

- - 110 V 5811420300- �30 V - 5811420400

- - - - 4.3 1100 3 / 10 3 / 10 0.3 1); 3) 5811420000

1� V - -

4.3 1100 3 / 10 3 / 10 0.3 1); 4)

5811421500- �4 V - 5811421200

�4 V - - 581142110048 V - - 5811421600

- - 110 V 5811421300- �30 V - 5811421400

- - - - 4.3 1100 3 / 10 3 / 10 0.3 1); 3); 4) 5811421000

1� V - -

4.3 1100 -0.95 / 10 3 / 10 0.3 �)

5811422500- �4 V - 5811422200

�4 V - - 581142210048 V - - 5811422600

- - 110 V 5811422300- �30 V - 5811422400

- - - 4.3 1100 -0.95 / 10 3 / 10 0.3 �); 3) 5811422000

1� V - -

4.3 1100 -0.95 / 10 3 / 10 0.3 �); 4)

5811423500- �4 V - 5811423200

�4 V - - 581142310048 V - - 5811423600

- - 110 V 5811423300- �30 V - 5811423400

- - - 4.3 1100 -0.95 / 10 3 / 10 0.3 �); 3); 4) 5811423000

MO = Manual override1) Pilot: internal�) Pilot: external3) Basic valve without coil4) with throttleNominal flow Qn at � bar and Δp = 1 bar

91Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ closed center

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

4022

70

35,2

5,3

87,5

17 34

0013���4

The pilot valves can be loosened and turned through 180°.

9� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ exhausted center

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�141

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 15 msSwitch-off time �� msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power con-sumption

Switch-on power

Holding power

DC AC 50 Hz AC 60 Hz DC AC 50 Hz AC 60 Hz DC AC 50 Hz

AC 60 Hz

AC 50 Hz

AC 60 Hz

W VA VA VA VA1� V - - -10% / +10% - - 5 - - - -

- �4 V - - -10% / +10% - - 10 - 8 -�4 V - - -10% / +10% - - 5 - - - -48 V - - -10% / +10% - - 5 - - - -

- - 110 V - - -10% / +10% - - 10 - 8- �30 V - - -10% / +10% - - 10 - 8 -

93Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ exhausted center

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure

min./max.

Control pressure

min./max.

Weight Note Part No.

DC AC 50 Hz

AC 60 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]1� V - -

4.3 1100 3 / 10 3 / 10 0.3 1)

5811520500- �4 V - 5811520200

�4 V - - 581152010048 V - - 5811520600

- - 110 V 5811520300- �30 V - 5811520400

- - - - 4.3 1100 3 / 10 3 / 10 0.3 1); 3) 5811520000

1� V - -

4.3 1100 3 / 10 3 / 10 0.3 1); 4)

5811521500- �4 V - 5811521200

�4 V - - 581152110048 V - - 5811521600

- - 110 V 5811521300- �30 V - 5811521400

- - - 4.3 1100 3 / 10 3 / 10 0.3 1); 3); 4) 5811521000

1� V - -

4.3 1100 -0.95 / 10 3 / 10 0.3 �)

5811522500- �4 V - 5811522200

�4 V - - 581152210048 V - - 5811522600

- - 110 V 5811522300- �30 V - 5811522400

- - - 4.3 1100 -0.95 / 10 3 / 10 0.3 �); 3) 5811522000

1� V - -

4.3 1100 -0.95 / 10 3 / 10 0.3 �); 4)

5811523500- �4 V - 5811523200

�4 V - - 581152310048 V - - 5811523600

- - 110 V 5811523300- �30 V - 5811523400

- - - 4.3 1100 -0.95 / 10 3 / 10 0.3 �); 3); 4) 5811523000

MO = Manual override1) Pilot: internal�) Pilot: external3) Basic valve without coil4) with throttleNominal flow Qn at � bar and Δp = 1 bar

94 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ exhausted center

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

4022

70

35,2

5,3

87,5

17 34

0013���4

The pilot valves can be loosened and turned through 180°.

95Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ pressurized center

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�14�

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 15 msSwitch-off time �� msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing Polyamide, fiber-glass reinforcedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power con-sumption

Switch-on power

Holding power

DC AC 50 Hz AC 60 Hz DC AC 50 Hz AC 60 Hz DC AC 50 Hz

AC 60 Hz

AC 50 Hz

AC 60 Hz

W VA VA VA VA1� V - - -10% / +10% - - 5 - - - -

- �4 V - - -10% / +10% - - 10 - 8 -�4 V - - -10% / +10% - - 5 - - - -48 V - - -10% / +10% - - 5 - - - -

- - 110 V - - -10% / +10% - - 10 - 8- �30 V - - -10% / +10% - - 10 - 8 -

9� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ pressurized center

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure

min./max.

Control pressure

min./max.

Weight Note Part No.

DC AC 50 Hz

AC 60 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]1� V - -

4.3 1100 3 / 10 3 / 10 0.3 1)

5811720500- �4 V - 5811720200

�4 V - - 581172010048 V - - 5811720600

- - 110 V 5811720300- �30 V - 5811720400

- - - - 4.3 1100 3 / 10 3 / 10 0.3 1); 3) 5811720000

1� V - -

4.3 1100 3 / 10 3 / 10 0.3 1); 4)

5811721500- �4 V - 5811721200

�4 V - - 581172110048 V - - 5811721600

- - 110 V 5811721300- �30 V - 5811721400

- - - - 4.3 1100 3 / 10 3 / 10 0.3 1); 3); 4) 5811721000

1� V - -

4.3 1100 -0.95 / 10 3 / 10 0.3 �)

5811722500- �4 V - 5811722200

�4 V - - 581172210048 V - - 5811722600

- - 110 V 5811722300- �30 V - 5811722400

- - - 4.3 1100 -0.95 / 10 3 / 10 0.3 �); 3) 5811722000

1� V - -

4.3 1100 -0.95 / 10 3 / 10 0.3 �); 4)

5811723500- �4 V - 5811723200

�4 V - - 581172310048 V - - 5811723600

- - 110 V 5811723300- �30 V - 5811723400

- - �30 V - 4.3 1100 -0.95 / 10 3 / 10 0.3 �); 3); 4) 5811723000

MO = Manual override1) Pilot: internal�) Pilot: external3) Basic valve without coil4) with throttleNominal flow Qn at � bar and Δp = 1 bar

97Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 22 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, Form B, industry ▶ Manual override: with detent ▶ pressurized center

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

4022

70

35,2

5,3

87,5

17 34

0013���4

The pilot valves can be loosened and turned through 180°.

98 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�143

Standards ISO 5599-1Version Spool valvePilot externalSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. 0 bar / 8 barAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 1� msSwitch-off time �9 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V 4� V -10% / +10% -10% / +10% �.7 1� 7.7- �30 V - -10% / +10% - 15.� 10.8

MO Operating voltage

Flow con-ductance

Qn Control pressure min./max.

Weight Part No.

DC AC 50 Hz C[l/(s*bar)] [l/min] [bar] [kg]

NC/NC�4 V 4� V

3.� 950 3.5 / 8 0.5R402003717

- �30 V R402003716

MO = Manual overrideThe valve must be supplied with compressed air via ports 3 and 5Nominal flow Qn at � bar and Δp = 1 bar

99Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

3018

40

174

7014 14

38

74,8

00130�78

100 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�144

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 15 msSwitch-off time �8 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V 4� V -10% / +10% -10% / +10% �.7 1� 7.7- �30 V - -10% / +10% - 15.� 10.8

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]�4 V 4� V

5.� 1400 3 / 1� 3 / 1� 0.35 1)5811170540

- �30 V 5811170440

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

101Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]�4 V 4� V

5.� 1400 3 / 1� 3 / 1� 0.35 1); 3)5811171540

- �30 V 5811171440

�4 V 4� V5.� 1400 -0.95 / 1� 3 / 1� 0.35 �)

5811172540

- �30 V 5811172440

�4 V 4� V5.� 1400 -0.95 / 1� 3 / 1� 0.35 �); 3)

5811173540

- �30 V 5811173440

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

Dimensions

3018

40

87

7014 14

3810

74,8

00130�79

10� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�145

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 13 msSwitch-off time 13 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V 4� V -10% / +10% -10% / +10% �.7 1� 7.7- �30 V - -10% / +10% - 15.� 10.8

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]�4 V 4� V

5.� 1400 1.5 / 1� 1.5 / 1� 0.5 1)5811290540

- �30 V 5811290440

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

103Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]�4 V 4� V

5.� 1400 1.5 / 1� 1.5 / 1� 0.5 1); 3)5811291540

- �30 V 5811291440

�4 V 4� V5.� 1400 -0.95 / 1� 1.5 / 1� 0.5 �)

5811292540

- �30 V 5811292440

�4 V 4� V5.� 1400 -0.95 / 1� 1.5 / 1� 0.5 �); 3)

5811293540

- �30 V 5811293440

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

Dimensions

3018

40

174

7014 14

38

74,8

00130�78

104 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent ▶ with differential piston

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�14�

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 15 msSwitch-off time �8 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V 4� V -10% / +10% -10% / +10% �.7 1� 7.7- �30 V - -10% / +10% - 15.� 10.8

105Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent ▶ with differential piston

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]�4 V 4� V

5.� 1400 1.3 / 1� 1.3 / 1� 0.38 1)5811670540

- �30 V 5811670440

�4 V 4� V5.� 1400 1.3 / 1� 1.3 / 1� 0.38 1); 3)

5811671540

- �30 V 5811671440

�4 V 4� V5.� 1400 -0.95 / 1� 1.3 / 1� 0.38 �)

5811672540

- �30 V 5811672440

�4 V 4� V5.� 1400 -0.95 / 1� 1.3 / 1� 0.38 �); 3)

5811673540

- �30 V 5811673440

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleDifferential piston, signal 14 has priorityThe minimum pilot pressure at port 14 is dependent on the pressure in port 1.Nominal flow Qn at � bar and Δp = 1 bar

Dimensions

3018

40

87

7027,5 14

38

74,8

10

Ø26

0013���0

10� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�147

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 14 msSwitch-off time �8 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V 4� V -10% / +10% -10% / +10% �.7 1� 7.7- �30 V - -10% / +10% - 15.� 10.8

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]�4 V 4� V

4.3 1100 3 / 1� 3 / 1� 0.5 1)5811490540

- �30 V 5811490440

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

107Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]�4 V 4� V

4.3 1100 3 / 1� 3 / 1� 0.5 1); 3)5811491540

- �30 V 5811491440�4 V 4� V

4.3 1100 -0.95 / 1� 3 / 1� 0.5 �)5811492540

- �30 V 5811492440�4 V 4� V

4.3 1100 -0.95 / 1� 3 / 1� 0.5 �); 3)5811493540

- �30 V 5811493440�4 V 4� V

4.3 1100 3 / 1� 3 / 1� 0.5 1)5811590540

- �30 V 5811590440�4 V 4� V

4.3 1100 3 / 1� 3 / 1� 0.5 1); 3)5811591540

- �30 V 5811591440�4 V 4� V

4.3 1100 -0.95 / 1� 3 / 1� 0.5 �)5811592540

- �30 V 5811592440�4 V 4� V

4.3 1100 -0.95 / 1� 3 / 1� 0.5 �); 3)5811593540

- �30 V 5811593440�4 V 4� V

4.3 1100 3 / 1� 3 / 1� 0.5 1)5811790540

- �30 V 5811790440�4 V 4� V

4.3 1100 3 / 1� 3 / 1� 0.5 1); 3)5811791540

- �30 V 5811791440�4 V 4� V

4.3 1100 -0.95 / 1� 3 / 1� 0.5 �)5811792540

- �30 V 5811792440�4 V 4� V

4.3 1100 -0.95 / 1� 3 / 1� 0.5 �); 3)5811793540

- �30 V 5811793440

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

108 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

3018

40

174

7014 1438

74,8

00130�78

109Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�148

Standards ISO 5599-1Version Spool valvePilot externalSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. 0 bar / 8 barAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 1� msSwitch-off time �9 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V - -10% / +10% - � - -- �30 V - -10% / +10% - 7 4.8

MO Operating voltage

Flow con-ductance

Qn Control pressure min./max.

Compatibility index

Weight Part No.

DC AC 50 Hz

C

[l/(s*bar)] [l/min] [bar] [kg]

NC/NC�4 V -

3.� 950 3.5 / 8 14 0.5R402003719

- �30 V R402003718

MO = Manual overrideThe valve must be supplied with compressed air via ports 3 and 5Nominal flow Qn at � bar and Δp = 1 bar

110 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

3018

40

174

7014 1438

74,8

00130�78

111Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�149

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 15 msSwitch-off time �8 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V - -10% / +10% - � - -- �30 V - -10% / +10% - 7 4.8

11� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure

min./max.

Control pressure

min./max.

Compatibil-ity index

Note Part No.

DC AC 50 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V -5.� 1400 3 / 10 3 / 10 14 0.35 1); �)

5811170650

- �30 V 5811170450

�4 V -5.� 1400 3 / 10 3 / 10 14 0.35 1); �);

4)5811171650

- �30 V 5811171450

�4 V -5.� 1400 -0.95 / 10 3 / 10 14 0.35 1); 3)

5811172650

- �30 V 5811172450

�4 V -5.� 1400 -0.95 / 10 3 / 10 14 0.35 1); 3);

4)5811173650

- �30 V 5811173450

MO = Manual override1) A working pressure of up to 1� bar is possible in the version with manual override without detent.�) Pilot: internal3) Pilot: external4) with throttleNominal flow Qn at � bar and Δp = 1 bar

Dimensions

3018

40

87

7014 14

3810

74,8

00130�79

113Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�150

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 13 msSwitch-off time 13 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V - -10% / +10% - � - -- �30 V - -10% / +10% - 7 4.8

114 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure

min./max.

Control pressure

min./max.

Compatibil-ity index

Note Part No.

DC AC 50 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V -5.� 1400 1.5 / 10 1.5 / 10 14 0.5 1); �)

5811290650

- �30 V 5811290450

�4 V -5.� 1400 1.5 / 10 1.5 / 10 14 0.5 1); �);

4)5811291650

- �30 V 5811291450

�4 V -5.� 1400 -0.95 / 10 1.5 / 10 14 0.5 1); 3)

5811292650

- �30 V 5811292450

�4 V -5.� 1400 -0.95 / 10 1.5 / 10 14 0.5 1); 3);

4)5811293650

- �30 V 5811293450

MO = Manual override1) A working pressure of up to 1� bar is possible in the version with manual override without detent.�) Pilot: internal3) Pilot: external4) with throttleNominal flow Qn at � bar and Δp = 1 bar

Dimensions

3018

40

174

7014 14

38

74,8

00130�78

115Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent ▶ with differential piston

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�151

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 15 msSwitch-off time �8 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V - -10% / +10% - � - -- �30 V - -10% / +10% - 7 4.8

11� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent ▶ with differential piston

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure

min./max.

Control pressure

min./max.

Compatibil-ity index

Note Part No.

DC AC 50 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V -5.� 1400 1.3 / 10 1.3 / 10 14 0.38 1); �)

5811670650

- �30 V 5811670450

�4 V -5.� 1400 1.3 / 10 1.3 / 10 14 0.38 1); �);

4)5811671650

- �30 V 5811671450

�4 V -5.� 1400 -0.95 / 10 1.3 / 10 14 0.38 1); 3)

5811672650

- �30 V 5811672450

�4 V -5.� 1400 -0.95 / 10 1.3 / 10 14 0.38 1); 3);

4)5811673650

- �30 V 5811673450

MO = Manual override1) A working pressure of up to 1� bar is possible in the version with manual override without detent.�) Pilot: internal3) Pilot: external4) with throttleDifferential piston, signal 14 has priorityThe minimum pilot pressure at port 14 is dependent on the pressure in port 1.Nominal flow Qn at � bar and Δp = 1 bar

Dimensions

3018

40

87

7027,5 14

38

74,8

10

Ø26

0013���0

117Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�15�

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 14 msSwitch-off time �8 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V - -10% / +10% - � - -- �30 V - -10% / +10% - 7 4.8

118 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure

min./max.

Control pressure

min./max.

Compatibil-ity index

Note Part No.

DC AC 50 Hz

C

[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V -4.3 1100 3 / 10 3 / 10 14 0.5 1); �)

5811490650

- �30 V 5811490450

�4 V -4.3 1100 3 / 10 3 / 10 14 0.5 1); �);

4)5811491650

- �30 V 5811491450

�4 V -4.3 1100 -0.95 / 10 3 / 10 14 0.5 1); 3)

5811492650

- �30 V 5811492450

�4 V -4.3 1100 -0.95 / 10 3 / 10 14 0.5 1); 3);

4)5811493650

- �30 V 5811493450

�4 V -4.3 1100 3 / 10 3 / 10 14 0.5 1); �)

5811590650

- �30 V 5811590450

�4 V -4.3 1100 3 / 10 3 / 10 14 0.5 1); �);

4)5811591650

- �30 V 5811591450

�4 V -4.3 1100 -0.95 / 10 3 / 10 14 0.5 1); 3)

5811592650

- �30 V 5811592450

�4 V -4.3 1100 -0.95 / 10 3 / 10 14 0.5 1); 3);

4)5811593650

- �30 V 5811593450

�4 V -4.3 1100 3 / 10 3 / 10 14 0.5 1); �)

5811790650

- �30 V 5811790450

�4 V -4.3 1100 3 / 10 3 / 10 14 0.5 1); �);

4)5811791650

- �30 V 5811791450

�4 V -4.3 1100 -0.95 / 10 3 / 10 14 0.5 1); 3)

5811792650

- �30 V 5811792450

�4 V -4.3 1100 -0.95 / 10 3 / 10 14 0.5 1); 3);

4)5811793650

- �30 V 5811793450

MO = Manual override1) A working pressure of up to 1� bar is possible in the version with manual override without detent.�) Pilot: internal3) Pilot: external4) with throttleNominal flow Qn at � bar and Δp = 1 bar

119Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: with detent, without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

3018

40

174

7014 14

38

74,8

00130�78

1�0 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�155

Standards ISO 5599-1Version Spool valvePilot externalSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. 0 bar / 8 barAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 1� msSwitch-off time �9 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V - -10% / +10% - �.7 - -- �30 V - -10% / +10% - 15.� 10.8

Operating voltage

Flow conduc-tance

Qn Control pressure min./max.

Weight Part No.

DC AC 50 Hz C[l/(s*bar)] [l/min] [bar] [kg]

NC/NC�4 V -

3.� 950 3.5 / 8 0.5R402003721

- �30 V R402003720

The valve must be supplied with compressed air via ports 3 and 5Nominal flow Qn at � bar and Δp = 1 bar

1�1Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

3018

40

174

7014 14

38

74,8

00130�78

1�� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�154

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 15 msSwitch-off time �8 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V - -10% / +10% - �.7 - -- �30 V - -10% / +10% - 15.� 10.8

Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V -5.� 1400 3 / 1� 3 / 1� 0.35 1)

5811170530

- �30 V 5811170430

�4 V -5.� 1400 3 / 1� 3 / 1� 0.35 1); 3)

5811171530

- �30 V 5811171430

1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

1�3Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V -5.� 1400 -0.95 / 1� 3 / 1� 0.35 �)

5811172530

- �30 V 5811172430

�4 V -5.� 1400 -0.95 / 1� 3 / 1� 0.35 �); 3)

5811173530

- �30 V 5811173430

1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

Dimensions

3018

40

87

7014 14

3810

74,8

00130�79

1�4 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�155

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 13 msSwitch-off time 13 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V - -10% / +10% - �.7 - -- �30 V - -10% / +10% - 15.� 10.8

Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V - 5.� 1400 1.5 / 1� 1.5 / 1� 0.5 1) 5811290530

- �30 V 5.� 1400 1.5 / 1� 1.5 / 1� 0.5 1) 5811290430

1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

1�5Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V - 5.� 1400 1.5 / 1� 1.5 / 1� 0.5 1); 3) 5811291530

- �30 V 5.� 1400 1.5 / 1� 1.5 / 1� 0.5 1); 3) 5811291430

�4 V -5.� 1400 -0.95 / 1� 1.5 / 1� 0.5 �)

5811292530

- �30 V 5811292430

�4 V -5.� 1400 -0.95 / 1� 1.5 / 1� 0.5 �); 3)

5811293530

- �30 V 5811293430

1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

Dimensions

3018

40

174

7014 14

38

74,8

00130�78

1�� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without ▶ with differential piston

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�15�

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 15 msSwitch-off time �8 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V - -10% / +10% - �.7 - -- �30 V - -10% / +10% - 15.� 10.8

Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V -5.� 1400 1.3 / 1� 1.3 / 1� 0.38 1)

5811670530

- �30 V 5811670430

1) Pilot: internal�) Pilot: external3) with throttleDifferential piston, signal 14 has priorityThe minimum pilot pressure at port 14 is dependent on the pressure in port 1.Nominal flow Qn at � bar and Δp = 1 bar

1�7Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without ▶ with differential piston

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V -5.� 1400 1.3 / 1� 1.3 / 1� 0.38 1); 3)

5811671530

- �30 V 5811671430

�4 V -5.� 1400 -0.95 / 1� 1.3 / 1� 0.38 �)

5811672530

- �30 V 5811672430

�4 V -5.� 1400 -0.95 / 1� 1.3 / 1� 0.38 �); 3)

5811673530

- �30 V 5811673430

1) Pilot: internal�) Pilot: external3) with throttleDifferential piston, signal 14 has priorityThe minimum pilot pressure at port 14 is dependent on the pressure in port 1.Nominal flow Qn at � bar and Δp = 1 bar

Dimensions

3018

40

87

7027,5 14

38

74,8

10

Ø26

0013���0

1�8 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�157

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 14 msSwitch-off time �8 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V - -10% / +10% - �.7 - -- �30 V - -10% / +10% - 15.� 10.8

Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V -4.3 1100 3 / 1� 3 / 1� 0.5 1)

5811490530- �30 V 5811490430

�4 V -4.3 1100 3 / 1� 3 / 1� 0.5 1); 3)

5811491530- �30 V 5811491430

1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

1�9Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x22 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC AC 50 Hz C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V -4.3 1100 -0.95 / 1� 3 / 1� 0.5 �)

5811492530- �30 V 5811492430

�4 V -4.3 1100 -0.95 / 1� 3 / 1� 0.5 �); 3)

5811493530- �30 V 5811493430

�4 V -4.3 1100 3 / 1� 3 / 1� 0.5 1)

5811590530

- �30 V 5811590430

�4 V -4.3 1100 3 / 1� 3 / 1� 0.5 1); 3)

5811591530- �30 V 5811591430

�4 V -4.3 1100 -0.95 / 1� 3 / 1� 0.5 �)

5811592530- �30 V 5811592430

�4 V -4.3 1100 -0.95 / 1� 3 / 1� 0.5 �); 3)

5811593530- �30 V 5811593430

�4 V -4.3 1100 3 / 1� 3 / 1� 0.5 1)

5811790530- �30 V 5811790430

�4 V -4.3 1100 3 / 1� 3 / 1� 0.5 1); 3)

5811791530- �30 V 5811791430

�4 V -4.3 1100 -0.95 / 1� 3 / 1� 0.5 �)

5811792530- �30 V 5811792430

�4 V -4.3 1100 -0.95 / 1� 3 / 1� 0.5 �); 3)

5811793530- �30 V 5811793430

1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

Dimensions

3018

40

174

7014 14

38

74,8

00130�78

130 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�158

Standards ISO 5599-1Version Spool valvePilot externalSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. 0 bar / 8 barAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 1� msSwitch-off time �9 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption

DC DC DCW

�4 V -10% / +10% �

MO Operating voltage

Flow conduc-tance

Qn Control pres-sure

min./max.

Weight Part No.

DC C[l/(s*bar)] [l/min] [bar] [kg]

NC/NC �4 V 3.� 950 3.5 / 8 0.58 R402003722

MO = Manual overrideThe valve must be supplied with compressed air via ports 3 and 5Nominal flow Qn at � bar and Δp = 1 bar

131Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

14 70 14 40

18

30205,8

74,8

38

00130�7�

13� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�159

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 15 msSwitch-off time �8 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption

DC DC DCW

�4 V -10% / +10% �

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 5.� 1400 3 / 10 3 / 10 0.39 1) 5811170190

�4 V 5.� 1400 3 / 10 3 / 10 0.39 1); 3) 5811171190

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

133Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 5.� 1400 -0.95 / 10 3 / 10 0.39 �) 5811172190

�4 V 5.� 1400 -0.95 / 10 3 / 10 0.39 �); 3) 5811173190

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

Dimensions

14 70 14 40

18

30102,9

74,8

3810

00130�77

134 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�1�0

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 13 msSwitch-off time 13 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption

DC DC DCW

�4 V -10% / +10% �

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 5.� 1400 1.5 / 10 1.5 / 10 0.58 1) 5811290190

�4 V 5.� 1400 1.5 / 10 1.5 / 10 0.58 1); 3) 5811291190

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

135Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 5.� 1400 -0.95 / 10 1.5 / 10 0.58 �) 5811292190

�4 V 5.� 1400 -0.95 / 10 1.5 / 10 0.58 �); 3) 5811293190

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

Dimensions

14 70 14 40

18

30205,8

74,8

38

00130�7�

13� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent ▶ with differential piston

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�1�1

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 15 msSwitch-off time �8 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption

DC DC DCW

�4 V -10% / +10% �

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 5.� 1400 1.3 / 10 1.3 / 10 0.4� 1) 5811670190

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleDifferential piston, signal 14 has priorityThe minimum pilot pressure at port 14 is dependent on the pressure in port 1.Nominal flow Qn at � bar and Δp = 1 bar

137Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent ▶ with differential piston

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 5.� 1400 1.3 / 10 1.3 / 10 0.4� 1); 3) 5811671190

�4 V 5.� 1400 -0.95 / 10 1.3 / 10 0.4� �) 5811672190

�4 V 5.� 1400 -0.95 / 10 1.3 / 10 0.4� �); 3) 5811673190

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleDifferential piston, signal 14 has priorityThe minimum pilot pressure at port 14 is dependent on the pressure in port 1.Nominal flow Qn at � bar and Δp = 1 bar

Dimensions

27,5 70 14 40

1830102,9

74,8

3810

Ø26

0013��19

138 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�1��

Standards ISO 5599-1Version Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. See table belowAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-on time 14 msSwitch-off time �8 msMounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption

DC DC DCW

�4 V -10% / +10% �

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 4.3 1100 3 / 10 3 / 10 0.58 1) 5811490190

�4 V 4.3 1100 3 / 10 3 / 10 0.58 1); 3) 5811491190

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

139Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30x30 mm CNOMO ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Electr. connection: Plug, ISO 4400, form A ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Working pressure min./max.

Control pressure min./max.

Weight Note Part No.

DC C[l/(s*bar)] [l/min] [bar] [bar] [kg]

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.58 �) 5811492190

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.58 �); 3) 5811493190

�4 V 4.3 1100 3 / 10 3 / 10 0.58 1) 5811590190

�4 V 4.3 1100 3 / 10 3 / 10 0.58 1); 3) 5811591190

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.58 �) 5811592190

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.58 �); 3) 5811593190

�4 V 4.3 1100 3 / 10 3 / 10 0.58 1) 5811790190

�4 V 4.3 1100 3 / 10 3 / 10 0.58 1); 3) 5811791190

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.58 �) 5811792190

�4 V 4.3 1100 -0.95 / 10 3 / 10 0.58 �); 3) 5811793190

MO = Manual override1) Pilot: internal�) Pilot: external3) with throttleNominal flow Qn at � bar and Δp = 1 bar

Dimensions

14 70 14 40

18

30205,8

74,8

38

00130�7�

140 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Basic valve for CNOMO pilot valve ▶ single solenoid ▶ suitable for ATEX

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�1�3

Standards ISO 5599-1ATEX II �G�D T4 IP�5 T85°CVersion Spool valvePilot external, internalSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 1� barAmbient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Mounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.■ *) Note: ATEX variants can be manufactured by combining the basic valve without a coil with a CNOMO pilot valve, series DO30, and

an ATEX coil. ATEX ID: see ATEX coils catalog sheet.

Flow conductance Qn Control pressure min./max.

Weight Note Part No.

C[l/(s*bar)] [l/min] [bar] [kg]

5.� 1400 3 / 1� 0.�1 1); �) 5811180000

5.� 1400 3 / 1� 0.�1 1); �); 3) 5811181000

1) The pilot can be set by turning the seal under the valve cover by 180°.�) For internal pilot the working pressure min/max is the same as the control pressure min/max.3) with throttleBasic valve without pilot valveNominal flow Qn at � bar and Δp = 1 bar

141Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Basic valve for CNOMO pilot valve ▶ single solenoid ▶ suitable for ATEX

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

407014 14

3810

0013���9

14� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Basic valve for CNOMO pilot valve ▶ double solenoid ▶ suitable for ATEX

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�1�4

Standards ISO 5599-1ATEX II �G�D T4 IP�5 T85°CVersion Spool valvePilot external, internalSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 1� barAmbient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Mounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.■ *) Note: ATEX variants can be manufactured by combining the basic valve without a coil with a CNOMO pilot valve, series DO30, and

an ATEX coil. ATEX ID: see ATEX coils catalog sheet.

Flow conductance Qn Control pressure min./max.

Weight Note Part No.

C[l/(s*bar)] [l/min] [bar] [kg]

5.� 1400 1.5 / 1� 0.�1 1); �) 5811280000

5.� 1400 1.5 / 1� 0.�1 1); �); 3) 5811281000

1) The pilot can be set by turning the seal under the valve cover by 180°.�) For internal pilot the working pressure min/max is the same as the control pressure min/max.3) with throttleBasic valve without pilot valveNominal flow Qn at � bar and Δp = 1 bar

143Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Basic valve for CNOMO pilot valve ▶ double solenoid ▶ suitable for ATEX

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

407014 14

3810

0013���9

144 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Basic valve for CNOMO pilot valve; with differential piston ▶ suitable for ATEX

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�1�5

Standards ISO 5599-1ATEX II �G�D T4 IP�5 T85°CVersion Spool valvePilot external, internalSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 1� barAmbient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Mounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.■ * Note: ATEX version can be produced by combining the basic valve without coil with a series DO30 CNOMO pilot valve and an ATEX

coil. ATEX ID: see ATEX coils catalog page.

Flow conductance Qn Control pressure min./max.

Weight Note Part No.

C[l/(s*bar)] [l/min] [bar] [kg]

5.� 1400 1.3 / 1� 0.�1 1); �) 5811680000

5.� 1400 1.3 / 1� 0.�1 1); �); 3) 5811681000

1) The pilot can be set by turning the seal under the valve cover by 180°.�) For internal pilot the working pressure min/max is the same as the control pressure min/max.3) with throttleBasic valve without pilot valveDifferential piston, signal 14 has priorityThe minimum pilot pressure at port 14 is dependent on the pressure in port 1.Nominal flow Qn at � bar and Δp = 1 bar

145Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ Pilot valve width: 30 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Basic valve for CNOMO pilot valve; with differential piston ▶ suitable for ATEX

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

27,5

Ø26

4070 14

3810

0013��30

14� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Basic valve for CNOMO pilot valve ▶ suitable for ATEX

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�1��

Standards ISO 5599-1ATEX II �G�D T4 IP�5 T85°CVersion Spool valvePilot external, internalSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 1� barAmbient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Mounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.■ *) Note: ATEX variants can be manufactured by combining the basic valve without a coil with a CNOMO pilot valve, series DO30, and

an ATEX coil. ATEX ID: see ATEX coils catalog sheet.

Flow conductance Qn Control pressure min./max.

Weight Note Part No.

C[l/(s*bar)] [l/min] [bar] [kg]

4.3 1100 3 / 1� 0.�1 1); �) 5811480000

4.3 1100 3 / 1� 0.�1 1); �); 3) 5811481000

4.3 1100 3 / 1� 0.�1 1); �) 5811580000

4.3 1100 3 / 1� 0.�1 1); �); 3) 5811581000

4.3 1100 3 / 1� 0.�1 1); �) 5811780000

1) The pilot can be set by turning the seal under the valve cover by 180°.�) For internal pilot the working pressure min/max is the same as the control pressure min/max.3) with throttleBasic valve without pilot valveNominal flow Qn at � bar and Δp = 1 bar

147Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ Pilot valve width: 30 mm ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Basic valve for CNOMO pilot valve ▶ suitable for ATEX

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Flow conductance Qn Control pressure min./max.

Weight Note Part No.

C[l/(s*bar)] [l/min] [bar] [kg]

4.3 1100 3 / 1� 0.�1 1); �); 3) 5811781000

1) The pilot can be set by turning the seal under the valve cover by 180°.�) For internal pilot the working pressure min/max is the same as the control pressure min/max.3) with throttleBasic valve without pilot valveNominal flow Qn at � bar and Δp = 1 bar

Dimensions

407014 14

3810

0013���9

148 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1▶ Qn = 950 l/min ▶ plate connection ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Can be assembled into blocks ▶ ATEX certified

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�1�7

Standards ISO 5599-1ATEX II �G�D T4 IP�5 T85°CVersion Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. 0 bar / 8 barAmbient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1Mounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Flow conduc-tance

Qn Control pres-sure

min./max.

Weight Part No.

C[l/(s*bar)] [l/min] [bar] [kg]

NC/NC 4.� 950 3.5 / 8 0.�1 R402003708

Nominal flow Qn at � bar and Δp = 1 bar

Dimensions

4070

35

0013����

149Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Can be assembled into blocks ▶ Single air pilot ▶ ATEX certified

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�1�8

Standards ISO 5599-1ATEX II �G�D T4 IP�5 T85°CVersion Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 1� barAmbient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1Mounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Flow conduc-tance

Qn Control pres-sure

min./max.

Weight Note Part No.

C[l/(s*bar)] [l/min] [bar] [kg]

5.� 1400 3 / 1� 0.�1 - 5811130000

5.� 1400 3 / 1� 0.�1 1) 5811131000

1) with throttleConnection 1� must be connected with atmospheresNominal flow Qn at � bar and Δp = 1 bar

Dimensions

4070

35

0013����

150 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Can be assembled into blocks ▶ double air pilot ▶ ATEX certified

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�1�9

Standards ISO 5599-1ATEX II �G�D T4 IP�5 T85°CVersion Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 1� barAmbient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1Mounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Flow conduc-tance

Qn Control pres-sure

min./max.

Weight Note Part No.

C[l/(s*bar)] [l/min] [bar] [kg]

5.� 1400 1.5 / 1� 0.�1 - 5811230000

5.� 1400 1.5 / 1� 0.�1 1) 5811231000

1) with throttleNominal flow Qn at � bar and Δp = 1 bar

Dimensions

4070

35

0013����

151Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Can be assembled into blocks ▶ Manual override: with detent ▶ ATEX certified

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Standards ISO 5599-1ATEX II �G�D T4 IP�5 T85°CVersion Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 1� barAmbient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1Mounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Flow conduc-tance

Qn Control pres-sure

min./max.

Weight Note Part No.

C[l/(s*bar)] [l/min] [bar] [kg]

5.� 1400 1.5 / 1� 0.�1 - 5811330000

5.� 1400 1.5 / 1� 0.�1 1) 5811331000

1) with throttleNominal flow Qn at � bar and Δp = 1 bar

Dimensions

4070

81

35

0013���8

With manual override

15� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/2-way valve, Series 581, size 1▶ Qn = 1400 l/min ▶ plate connection ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Can be assembled into blocks ▶ with differential piston ▶ ATEX certified

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�171

Standards ISO 5599-1ATEX II �G�D T4 IP�5 T85°CVersion Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 1� barAmbient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1Mounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Flow conduc-tance

Qn Control pres-sure

min./max.

Weight Note Part No.

C[l/(s*bar)] [l/min] [bar] [kg]

5.� 1400 1.3 / 1� 0.�1 - 5811630000

5.� 1400 1.3 / 1� 0.�1 1) 5811631000

1) with throttleDifferential piston, signal 14 has priorityNominal flow Qn at � bar and Δp = 1 bar

Dimensions

4070

35

Ø26

27,50013���7

153Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Can be assembled into blocks ▶ ATEX certified

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0013�17�

Standards ISO 5599-1ATEX II �G�D T4 IP�5 T85°CVersion Spool valveSealing principle soft sealingBlocking principle Single base plate principleWorking pressure min./max. -0.95 bar / 1� barAmbient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airMax. particle size 50 µmOil content of compressed air 0 mg/m³ - 5 mg/m³Pneumatic ports Base plate ISO 5599-1Mounting screw with hexagon socketmounting screw tightening torque � Nm

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Flow conduc-tance

Qn Control pres-sure

min./max.

Weight Note Part No.

C[l/(s*bar)] [l/min] [bar] [kg]

4.3 1100 3 / 1� 0.�1 - 5811430000

4.3 1100 3 / 1� 0.�1 1) 5811431000

4.3 1100 3 / 1� 0.�1 - 5811530000

4.3 1100 3 / 1� 0.�1 1) 5811531000

4.3 1100 3 / 1� 0.�1 - 5811730000

4.3 1100 3 / 1� 0.�1 1) 5811731000

1) with throttleNominal flow Qn at � bar and Δp = 1 bar

154 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

5/3-way valve, Series 581, size 1▶ Qn = 1100 l/min ▶ plate connection ▶ compressed air connection output: Base plate ISO 5599-1 ▶ Can be assembled into blocks ▶ ATEX certified

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

4070

35

0013����

155Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Slow-start valve▶ Qn = 3300 l/min ▶ Pilot valve width: 15 mm ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

001303�4

Version Spool valveWorking pressure min./max. 3 bar / 10 barAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 5 µmOil content of compressed air 0 mg/m³ - 1 mg/m³

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-off time �0 ms

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power con-sumption

Switch-on power

Holding power

DC AC 50 Hz AC 60 Hz DC AC 50 Hz AC 60 Hz DC AC 50 Hz

AC 60 Hz

AC 50 Hz

AC 60 Hz

W VA VA VA VA- �4 V - - -10% / +10% - - 10 - 8 -

�4 V - - -10% / +10% - - � - - - -- - 110 V - - -10% / +10% - - 10 - 8- �30 V - - -10% / +10% - - 10 - 8 -

MO Operating voltage

Flow con-ductance

Qn Weight Note Part No.

DC AC 50 Hz AC 60 Hz C[l/(s*bar)] [l/min] [kg]

- �4 V -

11.3 3300 0.39

1) 5835901200�4 V - - 1) 5835900100�4 V - - 4) 5835901100�4 V - - �); 3) 5835902100

- - 110 V 4) 5835901300- �30 V - 4) 5835901400

MO = Manual override1) with encapsulated cable�) electrical connector form C, ISO 15�173) pin spacing 8 mm4) pin spacing 9.4 mm

15� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Slow-start valve▶ Qn = 3300 l/min ▶ Pilot valve width: 15 mm ▶ Manual override: without detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

D583_018

157Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Slow-start valve▶ Qn = 3300 l/min ▶ Pilot valve width: 22 mm ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

001303��

Version Spool valveWorking pressure min./max. 3 bar / 10 barAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 5 µmOil content of compressed air 0 mg/m³ - 1 mg/m³

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-off time �0 ms

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power con-sumption

Switch-on power

Holding power

DC AC 50 Hz AC 60 Hz DC AC 50 Hz AC 60 Hz DC AC 50 Hz

AC 60 Hz

AC 50 Hz

AC 60 Hz

W VA VA VA VA- �4 V - - -10% / +10% - - 10 - 8 -

�4 V - - -10% / +10% - - � - - - -�4 V - - -10% / +10% - - 5 - - - -

- - 110 V - - -10% / +10% - - 10 - 8- �30 V - - -10% / +10% - - 10 - 8 -

158 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Slow-start valve▶ Qn = 3300 l/min ▶ Pilot valve width: 22 mm ▶ Manual override: with detent

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

MO Operating voltage

Flow con-ductance

Qn Weight Note Part No.

DC AC 50 Hz AC 60 Hz C[l/(s*bar)] [l/min] [kg]

- �4 V -

11.3 3300 0.39

�) 5832111200- �4 V - 1) 5832115200

�4 V - - �); 3) 5832151100�4 V - - 1); 3) 5832155100�4 V - - �) 5832111100�4 V - - 1) 5832115100

- - 110 V �) 5832111300- - 110 V 1) 5832115300- �30 V - �) 5832111400- �30 V - 1) 5832115400

- - - 11.3 3300 0.39�) 5832111000

1) 5832115000

MO = Manual override1) Pilot valve on side�) Pilot valve on top3) Low power consumption

Dimensions

D583_004

159Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Slow-start valve▶ Qn = 3300 l/min ▶ Pilot valve width: 30 mm ▶ Manual override: without detent, with detent, without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

001303�3

Version Spool valveWorking pressure min./max. 3 bar / 10 barAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 5 µmOil content of compressed air 0 mg/m³ - 1 mg/m³

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %Switch-off time �0 ms

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V - -10% / +10% - �.7 - -- �30 V - -10% / +10% - 10 8

�4 V - -10% / +10% - � - -

MO Operating voltage

Flow conduc-tance

Qn Weight Note Part No.

DC AC 50 Hz C[l/(s*bar)] [l/min] [kg]

�4 V -11.3 3300 0.39 -

5832171540

- �30 V 5832171440

�4 V -11.3 3300 0.39

1) 5832171650

- �30 V - 5832171450

-�4 V -

11.3 3300 0.39 -5832171530

- �30 V 5832171430

MO = Manual override1) Low power consumption

1�0 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Slow-start valve▶ Qn = 3300 l/min ▶ Pilot valve width: 30 mm ▶ Manual override: without detent, with detent, without

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

D583_019

1�1Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Slow-start valve▶ Qn = 3300 l/min

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

001303�0

Version Spool valveWorking pressure min./max. 3 bar / 10 barAmbient temperature min./max. -15°C / +50°CMedium temperature min./max. -15°C / +50°CMedium Compressed airMax. particle size 5 µmOil content of compressed air 0 mg/m³ - 5 mg/m³

Materials:Housing AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Flow conductance Qn Weight Part No.

C[l/(s*bar)] [l/min] [kg]

11.3 3300 0.39 5832131000

Dimensions

D583_�13

1�� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

Single subbase, for soft-start valve▶ compressed air connection output: G 1/2

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

P583_007

Ambient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airWorking pressure min./max. -1 bar / 1� barNumber of valve positions 1Exhaust (3,5) unrestricted exhaust

Ports separated

Materials:Subbase Die-cast aluminum, black painted

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Compressed air connection Weight Part No.Input Output Exhaust Pilot connection

[1] [2 / 4] [3 / 5] [X] [kg]G 1/� G 1/� G 1/� G 1/8 0.34 5834710000

Dimensions

D583_008

1�3Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Electro module▶ Plug, M8, 3-pin ▶ 581, Modular system

P590_00�

Ambient temperature min./max. -40°C / +90°CProtection class IP �7Operating voltage DC max. 48 V

Type Electrical interface Max. current Cable length L Part No.

[Port 2] [A] [m]

10 outputs Plug, M8, 3-pin �.1

3 049383190910 0493832018�5 049383781850 0493837907

Dimensions72

,5

1

8

27

3

4

510

6

9

1 2 31 2 3

12

30

15

21

18,5

9,2

82,5

1000133705

Pin assignment 1) +�4 V �) ground 3) 0 V

1�4 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Connecting cable, Series CN2▶ Plug, M8, 3-pin ▶ 581, Modular system

P590_0�1

Protection class IP �7

Electrical interface Number of wires Cable length L Weight Part No.

[Port 2] [m] [kg]Plug, M8, 3-pin 3 3 0.1 4407280000Plug, M8, 3-pin 3 5 0.1� 4404285000

Pin assignment

1 2 300133708

Pin assignment 1) +�4 V �) ground 3) 0 V

Pilot valve, 15 mm pilot valve width▶ Manual override: without detent ▶ 581, Modular system

P581_�05

Working pressure min./max. 0 bar / 10 barAmbient temperature min./max. -10°C / +50°CMedium Compressed air

Protection classwith electrical connec-tor/plug

See table below

Status display LED GreenDuty cycle 100 %

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

1�5Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Operating voltage

Power consumption

DC DCW

�4 V �.��4 V �

Operating voltage

Cable length Protection class Weight Note Part No.

DC[m] [kg]

�4 V

- IP �5 0.04 1); �) 04938335020.� IP �7 0.05 - 0493833308

0.35 IP �7 0.05� - 04938325060.5 IP �7 0.058 - 04938331030.7 IP �7 0.07 - 0493841904

5 IP �7 0.1 - 0493838601

1) for electrical connector�) Low power consumption

Dimensions, with cable

46

L +10-5

Ø8

15,2

1 2 30013���1

Pin assignment 1) +�4 V �) ground 3) 0 V

1�� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions, without cable

9,7

15,23,

8

3,8

3,8

8,2

40,8

3,5

Ø1,

9

10,8

23,7

M2,

5

8

15,2

20,7 8,6

0013����

Pilot valve, 30 mm pilot valve width with CNOMO porting configuration▶ 581, Modular system

P581_1�0

Working pressure min./max. See table belowAmbient temperature min./max. -10°C / +50°CMedium Compressed air

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

1�7Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

- �30 V - -�0% / +10% - 10 8�4 V - -10% / +10% - � - -�4 V - -10% / +10% - �.7 - -1� V - -10% / +10% - � - -48 V - -10% / +10% - � - -

110 V - -10% / +10% - � - -��0 V - -10% / +10% - � - -

- �4 V - -�0% / +10% - 10 8- 48 V - -�0% / +10% - 10 8- 110 V - -�0% / +10% - 10 8

MO Operating voltage

Working pres-sure min./max.

Weight Note Part No.

DC AC 50 Hz[bar] [kg]

- �4 V

0 / 10 0.17

1) 5428110020- 48 V 1) 5428110040- 110 V 1) 5428110070- �30 V 1) 5428110080

1� V - 1); �) 5420890010�4 V - 1); �) 542089002048 V - 1); �) 5420890030

110 V - 1); �) 5420890070��0 V - 1); �) 5420890080

-- �30 V

0 / 1�0.1��

1)5428150080

�4 V - 0.�0� 5420850020

MO = Manual override1) pilot valve 30x�� mm with CNOMO porting configuration�) Low power consumption

1�8 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

0 1

PRESS

29,9

30

2229

,5

56,5

35,5

21

4

32

15,57

0,5

M4

24V87mA16barPR1

100%EDmax....

. . . . . . 022

10

M5

5Ø

3

7,5

Ø4,5

21

2

1

0013���5

Pilot valve, 22 mm pilot valve width▶ Manual override: with detent ▶ 581, Modular system

P581_178

Working pressure min./max. 0 bar / 10 barAmbient temperature min./max. -15°C / +50°CMedium Compressed air

Protection classwith electrical connec-tor/plug

IP �5

Duty cycle 100 %

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Operating voltage

Power consumption

DC AC 50 Hz AC 60 Hz DCW

�4 V �30 V 110 V 5�4 V - - �

1�9Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Operating voltage

Weight Note Part No.

DC AC 50 Hz AC 60 Hz[kg]

�4 V�30 V 110 V 0.031 - 0493818805

- - 0.03 1) 0493818902

1) Low power consumption

Dimensions

1

142,7

22 14

222,7

22

14

4,5

Ø3,3

R16

0013���3

Coil, Series CO1▶ Coil width 22 mm ▶ Form B, industry

P581_17�

Connector standard ISO �95�electrical connections Plug, Form B, industryProtection class with electrical connec-tor/plug

IP �5

170 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

��0 V - -10% / +10% - 5 - -110 V - -10% / +10% - 5 - -

- 48 V - -10% / +10% - 10 8�4 V - -10% / +10% - � - -�4 V - -10% / +10% - 5 - -

- 110 V - -10% / +10% - 10 8- �30 V - -10% / +10% - 10 8- �4 V - -10% / +10% - 10 8

48 V - - - 5 - -1� V - - - 5 - -

Operating voltage

Weight Note Part No.

DC AC 50 Hz[kg]

��0 V - 0.054 - 0498317804110 V - 0.054 - 0498317707

- 48 V 0.054 - 0498317006

�4 V - 0.0511) 0498318800

- 0498317502- 110 V 0.051

-0498317103

- �30 V 0.054 0498322506- �4 V 0.054 0498316905

48 V - 0.054 - 04983176181� V - 0.054 - 0498317405

1) Low power consumption

171Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

2,25

17

22

Ø15,5

30°

29

29,5

Ø8

Ø16,6

0013���4

3/2-way valve

001�1338

Working pressure min./max. See table below

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

17� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Operating voltage

Voltage tolerance

Power consumption Switch-on power

Holding power

DC AC 50 Hz DC AC 50 Hz DC AC 50 Hz AC 50 HzW VA VA

�4 V - -10% / +10% - �.7 - -�4 V 4� V -10% / +10% -�0% / +10% �.7 - -

- 110 V - -�0% / +10% - 10 8- �30 V - -�0% / +10% - 10 8

Operating voltage

Working pressure min./max.

Ambient temperature

min./max.

Protection class

Weight Fig. Note Part No.

DC AC 50 Hz[bar] [°C] [kg]

�4 V - 0 / 10

-10°C / +50°C IP �5

0.�0� Fig. � 1) 5420770220- 110 V 0 / 10 0.�0� Fig. � 1) 5420775270- �30 V 0 / 10 0.�0� Fig. � 1) 5420775280

�4 V 4� V 0 / 1� 0.15 Fig. 1 - 5420800390- 110 V 0 / 1� 0.15 Fig. 1 - 5428200370- �30 V 0 / 1� 0.15 Fig. 1 - 5428200380

1) Low power consumptionnominal flow qn with secondary pressure � bar at Δp = 1 bar

Fig. 1

D535_�07

173Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Fig. 2

D535_�10

Control unit for manual override▶ for 581, Modular system

P590_043

Type Weight Note Material number[kg]

for double-sided electrically actuated valves, 15 pilot valve

width0.03 1) 0493835718

1) � controls per set

174 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Multipole plug▶ Socket, C/2 ▶ 581, Modular system

P590_018

number of plug options 1 Housing color Weight Note Part No.[kg]

PG�1 input, holes for � cables Ø8, incl.

mounting bracket and screws

1 position Black 0.�31 - 0493834118

PG�1 input, holes for � cables Ø8, incl.

mounting bracket and screws and connected

electro module (10 pilot valves)

1 position Black 0.0�9 1) 0493834304

PG�1 input, holes for � cables Ø8, incl.

mounting bracket and screws and connected

electro module (�0 pilot valves)

1 position Black 0.0�7 1) 0493834207

1) Housing: Plastic

Blanking plug▶ for 581, Modular system

P590_074

Ambient temperature min./max.

-10°C / +50°C

Type Material Weight Note Material number[kg]

Blanking plug for outputs not used on the electro

modulePolyamide 0.00� 1) 0493833405

1) quantity delivered 10

175Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

valve housing, without cover▶ standard:ISO 5599-1 ▶ for 581, size 1, Aluminum

P581_174

Ambient temperature min./max.

-�0°C / +70°C

Medium Compressed airMax. particle size 50 µmOil content of compressed air 40 mg/m³ - 400 mg/m³

Type Material Weight Note Material number[kg]

5/�-way valve, mono-stable Aluminum 0.�7 3) 5811100000

5/�-way valve, double solenoid Aluminum 0.�7 3) 5811200000

5/�-way valve, double solenoid, with manual

overrideAluminum 0.�7 3)1) 5811300000

5/3-way valve, closed center Aluminum 0.15 3) 5811400000

5/3-way valve, exhaust-ed center Aluminum 0.� 3) 5811500000

5/�-way solenoid valve, with differential piston Aluminum 0.� 3)�) 5811600000

5/3-way valve, pressur-ized center Aluminum 0.14 3) 5811700000

�x3/�-way solenoid valve Aluminum 0.�7 3) 5811800000

1) The valve can be changed to a single solenoid version with air return.�) signal 14 has priority3) The valve housings must be supplemented with dowel pins or a throttle insert.

17� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

valve housing, without cover▶ standard:ISO 5599-1 ▶ for 581, size 1, Plastic

P581_174

Ambient temperature min./max.

-�0°C / +70°C

Medium Compressed airMax. particle size 50 µmOil content of compressed air 40 mg/m³ - 400 mg/m³

Type Material Weight Note Material number[kg]

�x3/�-way solenoid valve

Polyamide, fiber-glass reinforced 0.1 - R402002299

5/�-way valve, mono-stable

Polyamide, fiber-glass reinforced 0.09 - R402002292

5/�-way valve, double solenoid

Polyamide, fiber-glass reinforced 0.08 - R402002293

5/�-way valve, double solenoid, with manual

overridePolyamide, fiber-glass

reinforced 0.08 1) R402002294

5/�-way solenoid valve, with differential piston

Polyamide, fiber-glass reinforced 0.14 �) R402002297

5/3-way valve, closed center

Polyamide, fiber-glass reinforced 0.09 - R402002295

5/3-way valve, pressur-ized center

Polyamide, fiber-glass reinforced 0.09 - R402002298

5/3-way valve, exhaust-ed center

Polyamide, fiber-glass reinforced 0.09 - R402002296

1) The valve can be changed to a single solenoid version with air return.�) signal 14 has priority

177Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

valve cover, with or without pilot valve▶ standard:ISO 5599-1 ▶ for 581, size 1, for electrically operated valves, modular system

P581_1�3

Ambient temperature min./max.

-�0°C / +70°C

Medium Compressed airMax. particle size 50 µmOil content of compressed air 40 mg/m³ - 400 mg/m³

Type Pilot valve width Weight Note Material number[mm] [kg]

5/�-way valve, single solenoid 15 mm 0.057 1) 0493842501

�x3/�-, 5/�-, 5/3-way valve 15 mm 0.054 1) 0493842609

5/�-way valve, mono-stable �� mm 0.13 �)4) 5811010000

�x3/�-, 5/�-, 5/3-way valve �� mm 0.15 �)4) 5811020000

5/�-way valve, mono-stable �� mm 0.13 �)3) 5811050000

�x3/�-, 5/�-, 5/3-way valve �� mm 0.15 �)3) 5811060000

all 30 mm 0.� 1) 5811080000

1) without pilot valve�) with pilot valve without coil3) For version �4 V DC, � W4) For version 1� V DC - �30 V AC, 5 W

throttle insert for flow control, Port 3/5▶ for 581, size 1, Modular system

P581_100

178 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Weight Note Material number[kg]

0.014 1) 5811001000

1) delivered in pairs incl. plug set

Dimensions

00133�04

plug set for flow control screws▶ for 581, size 1, Modular system

P581_11�

179Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Material Weight Note Material number[kg]

Polyamide 0.015 1) 5811000000

1) Delivered in pairsfor modification of a valve from ‘’with throttle set’’ to ‘’without throttle set’’

Safety plugs for throttle insert▶ for 581, size 1 - 4, Modular system

P581_04�

Type Delivery quantity Weight Material number[Piece] [kg]

ISO 1 - 4 10 0.005 4634210000

Maintenance plate to exchange valve▶ standard:ISO 5599-1 ▶ for 581, size 1

P581_179

Ambient temperature min./max.

-10°C / +50°C

Medium Compressed airMax. particle size 50 µmOil content of compressed air 40 mg/m³ - 400 mg/m³

Working pressure min./max.

Material Surface Weight Material number

[kg]-0.95 / 10 Aluminum black anodized 0.� 5801590000

180 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

D581_180

Part No. A1 A2 B C5801590000 70 85 40 �5

Valve cover seal, Valve housing seal▶ for 581, size 1

P581_173

Type Material Weight Material number[kg]

Valve cover seal, electrically operated valves Nitrile rubber 0.005 0490429808

Valve cover seal, pneumati-cally operated valves Nitrile rubber 0.005 0490429905

Valve housing seal, between housing and base plate Nitrile rubber 0.001 0486715103

181Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Mecproof, cabinet mounting▶ standard:ISO 5599-1 ▶ for 581, size 1, Modular system

P581_�55

Ambient temperature min./max.

-10°C / +50°C

Medium Compressed airMax. particle size 50 µmOil content of compressed air 40 mg/m³ - 400 mg/m³

Port Type Delivery quantity Weight Note Material number[Piece] [kg]

G 1/�Intermediate plate

for slow-start valve series 583

- 0.�3 - 5802960000

- Intermediate plate sealing - 0.03 - 5802970000

- Sealing strip incl. as-sembly instructions 10 0.0� 3) 5802980000

G 3/8 End plate - 0.34 - 5802950000

1) 5 connection thread on bottom�) � connection thread on bottom3) for max. 10 intermediate plates

18� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

T581_�87

1) intermediate plate �) intermediate plate gasket 3) sealing strip 4) end plate

183Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Single subbase, thread connections on the side▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/4 ▶ Reversed pressure supply permissible

00107419

Ambient temperature min./max. -�5°C / +70°CMedium temperature min./max. -�5°C / +70°CMedium Compressed airWorking pressure min./max. -0.95 bar / 70 barNumber of valve positions 1Direction of pneumatic port (1) On the sideDirection of pneumatic port (3,5) On the sideDirection of pneumatic port (�,4) On the sideExhaust (3,5) With directional exhaust (3/5)

Ports separated

Materials:Subbase Die-cast aluminum

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Grid dimen-sion

Part No.

Input Output Exhaust Pilot control exhaust

Pilot connec-tion

[1] [2 / 4] [3 / 5] [R] [X]ISO 1 G 1/4 G 1/4 G 1/4 G 1/8 G 1/8 48 1825503143

Part No. Weight

[kg]1825503143 0.17

184 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

D581_140

Part No. B1 H1 H2 H3 H4 H5 D1 D2 *) D3 *) L1 L2 L31825503143 48 3� 10 11,5 �1.5 �3.5 5.5 G 1/4 G 1/8 84 43 110

Part No. L4 L5 L61825503143 98 �4 58

*) Ports

Single subbase, thread connections on the bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/4 ▶ Reversed pressure supply permissible

574�-1�1

Ambient temperature min./max. -�5°C / +70°CMedium temperature min./max. -�5°C / +70°CMedium Compressed airWorking pressure min./max. -0.95 bar / --Number of valve positions 1Direction of pneumatic port (1) DownDirection of pneumatic port (3,5) DownDirection of pneumatic port (�,4) DownExhaust (3,5) With directional exhaust (3/5)

Ports separated

Materials:Subbase Die-cast aluminum

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

185Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Size Compressed air connection Weight Part No.Input Output Exhaust Pilot control

exhaustPilot connec-

tion[1] [2 / 4] [3 / 5] [R] [X] [kg]

ISO 1 G 1/4 G 1/4 G 1/4 G 1/8 G 1/8 0.19� 1825503201

Dimensions

D898_111

Part No. B1 B2 B3 D1 D2 *) D3 *) H1 H2 H3 L1 L2 L31825503201 4� 7 11.5 5.5 G 1/4 G 1/8 30 10 5 110 55 49

Part No. L4 L5 L6 L7 L81825503201 49 7 �3 11,5 31

*) Ports

18� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Single subbase, ports on side▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/8 - Ø 8

5810-491

Ambient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airWorking pressure min./max. -1 bar / 1� barNumber of valve positions 1Surface paintedDirection of pneumatic port (1) On the sideDirection of pneumatic port (3,5) On the sideDirection of pneumatic port (�,4) On the sideDirection of pneumatic port (X) On the sideExhaust (3,5) With directional exhaust (3/5)

Ports separated

Materials:Subbase Die-cast aluminum, black painted

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Part No.Input Output Exhaust Pilot connection

[1] [2 / 4] [3 / 5] [X] [kg]

ISO 1

G 1/8 G 1/8 G 1/8 G 1/8 0.11 5801710000G 1/4 G 1/4 G 1/4 G 1/8 0.17 5801740000

Ø � Ø � Ø � Ø 4 0.13 5801810000Ø 8 Ø 8 Ø 8 Ø � 0.�� 5801770000

Dimensions

D581_0�9

Part No. A *) B *) C D E F G H K L M5801710000 ISO 1 G 1/8 G 1/8 70 40 �0 8 ��.5 9 18 � 845801740000 ISO 1 G 1/4 G 1/8 70 40 �3 11 31.5 11.5 �3 � 9�5801810000 ISO 1 Ø � Ø 4 70 40 �0 8 ��.5 9 18 � 845801770000 ISO 1 Ø 8 Ø � 70 40 �3 10 31.5 11.5 �3 � 9�

187Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Part No. N R S T U V5801710000 9� 5.4 40 – – 105801740000 110 5.4 4� �4 �1 1�5801810000 9� 5.4 40 – – 105801770000 110 5.4 4� �4 �1 1�

*) Ports

Single subbase, ports on bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/8 - Ø 6

5810-481

Ambient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airWorking pressure min./max. -1 bar / 1� barNumber of valve positions 1Surface paintedDirection of pneumatic port (1) DownDirection of pneumatic port (3,5) DownDirection of pneumatic port (�,4) DownDirection of pneumatic port (X) DownExhaust (3,5) unrestricted exhaust

Ports separated

Materials:Subbase Die-cast aluminum, black painted

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Part No.Input Output Exhaust Pilot connection

[1] [2 / 4] [3 / 5] [X] [kg]

ISO 1G 1/8 G 1/8 G 1/8 G 1/8 0.11 5801700000

Ø � Ø � Ø � Ø 4 0.13 5801800000

Dimensions

D581_0�7

188 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Part No. A *) B *) C D E F G H K L M5801700000 ISO 1 G1/8 G1/8 70 40 �0 8 ��.5 9 18 � 845801800000 ISO 1 Ø � Ø 4 70 40 �0 8 ��.5 9 18 � 84

Part No. N P R S5801700000 9� 8 5.4 405801800000 9� 8 5.4 40

*) Ports

Subbase, for direct mounting of ISO valves on cylinders▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/8

P5�3_014

Ambient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airWorking pressure min./max. -1 bar / 1� barSurface black anodized

Materials:Subbase Aluminum, black anodizedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Note Part No.Input Output Exhaust Pilot connec-

tion[1] [2 / 4] [3 / 5] [X] [kg]

ISO 1 G 1/8 G 1/8 G 1/8 G 1/8 0.175 1) 5801690000

1) Ø 3� - 1�5 mm�) Ø �3 - 1�5 mmScope of delivery incl. mounting screws

189Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

D581_037

Part No. 1, 4, 3, (5) 2* 12, 14 A B C D E F G5801690000 ISO 1 G 1/8 G 1/8, G 1/4 G 1/8 93.5 80 �� 35 8 9 �0

Part No. H J K L5801690000 15 17 40 3�

* Two different threaded banjo bolts are supplied with 5801�90000 to be used with different cylinders.

190 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Intermediate plate, ports 2 and 4 on bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/4 ▶ Can be assembled into blocks ▶ Single base plate principle ▶ Reversed pressure supply permissible ▶ With collective pilot air exhaust

00107���

Ambient temperature min./max. -�5°C / +70°CMedium temperature min./max. -�5°C / +70°CMedium Compressed airWorking pressure min./max. -0.95 bar / 10 barNumber of valve positions 1Grid dimension 8� mmDirection of pneumatic port (1) On the sideDirection of pneumatic port (3,5) On the sideDirection of pneumatic port (�,4) DownDirection of pneumatic port (R) On the sideDirection of pneumatic port (X) On the sideExhaust (3,5) With directional exhaust (3/5)

Ports separatedCompressed air connection according to ISO 5599-1

Materials:Subbase Die-cast aluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Part No.

Output Pilot connection[2 / 4] [X] [kg]

ISO 1 G 1/4 G 1/8 0.�4� 1825503144

Scope of delivery incl. seal and mounting screws

191Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

00107���_a

Part No. A B C D E1 E2 E3 F1 F2 F3 F4 G11825503144 110 95 5,5 14 1�,5 1�,5 11,�5 3 4,5 9 M5 3

Part No. G2 G3 H1 H2 J K L M O P R S1825503144 13,5 11,�5 ��,5 18 G 1/8 44 �� 85 M5 7,5 13 71

Part No. T U V W1825503144 1,5 3 43 G 1/4

19� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

End plate left, End plate right▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Can be assembled into blocks ▶ Base plate principle, multiple ▶ Reversed pressure supply permissible

00107��1

Ambient temperature min./max. -�5°C / +70°CMedium temperature min./max. -�5°C / +70°CMedium Compressed airWorking pressure min./max. 0 bar / 1� barDirection of pneumatic port (1) On the sideDirection of pneumatic port (3,5) On the sideExhaust (3,5) With directional exhaust (3/5)

Ports separatedCompressed air connection according to ISO 5599-1

Materials:Subbase Die-cast aluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Part No.Input Exhaust

[1] [3 / 5] [kg]ISO 1 G 3/8 G 3/8 0.�08 1825503145

Scope of delivery incl. seal and mounting screws

Dimensions

00107701_a

193Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Part No. A B C C1 D D1 E1 E2 F2 G1 G2 H11825503145 7 G 3/8 8 � �4 �8 11 �� Ø 5,5 110 95 ��

Part No. H2 H3 J K L M N O P R1825503145 �� 4� �8 �8 85 � � 8 �4 Ø ��,1

194 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Intermediate plate, Ports 2 and 4 side or bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/4 ▶ Can be assembled into blocks

5811_09�_a

Ambient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airWorking pressure min./max. -1 bar / 1� barNumber of valve positions 1Surface paintedDirection of pneumatic port (�,4) Both directions possibleDirection of pneumatic port (X) DownExhaust (3,5) unrestricted exhaust

Ports separated

Materials:Subbase Die-cast aluminum, black paintedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Part No.Input Output Pilot connection

[1] [2 / 4] [X] [kg]ISO 1 G 1/4 G 1/4 G 1/8 0.�3 5801500000

Scope of delivery incl. seal and mounting screws

195Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

D581_110

Part No. A B B1 C D E F G H J K5801500000 ISO 1 � x G 1/4 3 x G 3/8 3 x G 1/4 5.5 11 5.5 9 �� 9� �4 1�

Part No. L M N O P R S T5801500000 n x 43 + 44 1� 3� �� 45.7 17 10� 8

n = number of subbases

19� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

End plate left, End plate right▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Can be assembled into blocks ▶ Base plate principle, multiple ▶ Reversed pressure supply permissible ▶ With collective pilot air exhaust

5811_09�_b

Ambient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airWorking pressure min./max. -1 bar / 1� barDirection of pneumatic port (1) Both directions possibleDirection of pneumatic port (3,5) Both directions possibleExhaust (3,5) unrestricted exhaust

Ports separatedCompressed air connection according to ISO 5599-1

Materials:Subbase Die-cast aluminum, black paintedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Part No.Input Exhaust

[1] [3 / 5] [kg]ISO 1 G 3/8 G 3/8 0.�� 5801510000

Delivered in pairsScope of delivery incl. seal and mounting screwsA suitable hole must be made for the side/bottom port.

197Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

D581_110

Part No. A B B1* C D E F G H J K5801510000 ISO 1 � x G 1/4 3 x G 3/8 3 x G 1/4 5.5 11 5.5 9 �� 9� �4 1�

Part No. L M N O P R S T U*5801510000 n x 43 + 44 1� 3� �� 45.7 17 10� 8 3 x G 3/8

n = number of subbasesThe B1* and U* connections are implemented as core hole diameters for the indicated threaded connections and must be produced if necessary.

198 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Intermediate plate, Ports 2 and 4 on side, 1,2 and 4 also on bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/4 ▶ Can be assembled into blocks

0010743�

Ambient temperature min./max. -15°C / +70°CMedium temperature min./max. -15°C / +80°CMedium Compressed airWorking pressure min./max. 0 bar / 1� barGrid dimension 43 mmMounting screw with hexagon socket

Ports separated

Materials:Housing Die-cast aluminumSubbase Die-cast aluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Fig. Note Part No.Input Output Pilot control

exhaustPilot connec-

tion[1] [2 / 4] [R] [X] [kg]

ISO 1

-

G 1/4 M5 M5

0.�4 Fig. 1 1) 1825503286- 0.�4 Fig. � �) 1825503288

G 1/4 0.�7 Fig. 3 3) 1825503290G 1/4 0.�7 Fig. 4 4) 1825503292

1) Ports � and 4 on side, pilot connection 1� and 14: single connection�) Ports � and 4 on side, pilot connection 1� and 14: central manifold3) Ports � and 4 on side, 1,� and 4 also on bottom, pilot connection 1� and 14: single connection4) Ports � and 4 on side, 1,� and 4 also on bottom, pilot connection 1� and 14: central manifoldScope of delivery incl. seal and mounting screws

Fig. 1, ports 2 and 4 on side, Pilot connection 12+14: single connection

00107438

199Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

00107444_a

Fig. 2, ports 2 and 4 on side, Pilot connection 12+14: central manifold

00107441

�00 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

00107444_b

Fig. 3, Ports 2 and 4 on side, 1,2 and 4 also on bottom, Pilot connection 12+14: single connection

00107440

�01Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

00107445

Fig. 4, Ports 2 and 4 on side, 1,2 and 4 also on bottom, Pilot connection 12+14: central manifold

00107441

End plate left, End plate right▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Can be assembled into blocks

00107431

Ambient temperature min./max. -15°C / +70°CMedium temperature min./max. -15°C / +70°CMedium Compressed airWorking pressure min./max. 0 bar / 1� barMounting screw with hexagon socketExhaust (3,5) With directional exhaust (3/5)

Ports separated

Materials:Subbase Die-cast aluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

�0� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Size Compressed air connection Weight Fig. Part No.Input Exhaust Pilot control

exhaustPilot connec-

tion[1] [3 / 5] [R] [X] [kg]

ISO 1 G 3/8 G 3/8 G 1/8 G 1/80.404 Fig. 1 18255032940.38� Fig. � 1825503297

Scope of delivery incl. seal and mounting screws

Dimensions

00107435

A = left and right end plates in two versions

n 2 3 4 … nX 150 193 �3� …

n = number of valve positions

Fig. 1, Thread connections 1, 3, and 5 axial

0010743�

�03Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

0010744�

Fig. 2, Thread connections 1, 3, and 5 axial and from the top

00107437

00107443

�04 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Intermediate plate, ports 2 and 4 on bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/8 - Ø 6 ▶ Can be assembled into blocks

5810_30�_b

Ambient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airWorking pressure min./max. -1 bar / 1� barNumber of valve positions 1Surface paintedDirection of pneumatic port (�,4) DownExhaust (3,5) unrestricted exhaust

Ports separated

Materials:Subbase Die-cast aluminum, black paintedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Port Weight Part No.

Output Pilot connection[2 / 4] [X] [kg]

ISO 1

G 1/8 G 1/8 - 0.14 5801720000G 1/4 G 1/8 G 1/4 0.�7 5801750000

Ø 8 Ø � - 0.3 5801780000Ø � Ø 4 - 0.1� 5801820000

Scope of delivery incl. seal and mounting screws

�05Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

D581_�31_a

* n = Number of subbases. ** Alternative port openings, closed with plugs

Part No. * A B C D E F G H J K5801720000 a ISO 1 G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 1005801750000 b ISO 1 G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1��5801780000 b ISO 1 Ø 8 G 3/8 G 3/8 Ø � �7 40 1�.5 ��.5 �0 1��5801820000 a ISO 1 Ø � G 1/4 G 1/4 Ø 4 �� �8.5 9.5 �9.5 14.5 100

Part No. L M N P Q R V X Z AA5801720000 �5 �7 43 41 14 �7.5 7� 5.4 7 85801750000 30 34 43 49 15 34 94 �.4 8 105801780000 30 34 43 49 15 34 94 �.4 8 105801820000 �5 �7 43 41 14 �7.5 7� 5.4 7 13.5

* Intermediate plates designated with the same letters (a‒d) can be mounted together without a transition plate.

�0� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Intermediate plate for separate air supply, ports 2 and 4 on bottom▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/8 - G 1/4 ▶ Can be assembled into blocks

5810_30�_b

Ambient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airWorking pressure min./max. -1 bar / 1� barNumber of valve positions 1Surface paintedDirection of pneumatic port (1) DownDirection of pneumatic port (3,5) DownDirection of pneumatic port (�,4) DownDirection of pneumatic port (X) DownExhaust (3,5) unrestricted exhaust

Ports separated

Materials:Subbase Die-cast aluminum, black paintedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Type Size Compressed air connection Port Weight Part No.Input Output Pilot connec-

tion[1] [2 / 4] [X] [kg]

Intermediate plate for sepa-rate air supply

ISO 1G 1/8 G 1/8

G 1/8- 0.14 5801670000

G 1/4 G 1/4 G 1/4 0.�7 5801680000

Scope of delivery incl. seal and mounting screws

�07Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

D581_�31_a

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801�80000 can also be connected to port 3 and 5.

Part No. A B C D E F G H J K L5801670000 ISO 1 G 1/8 G 1/4 G 1/4 G 1/8 �� �8.5 9.5 �9.5 14.5 100 �55801680000 ISO 1 G 1/4 G 3/8 G 3/8 G 1/8 �7 40 1�.5 ��.5 �0 1�� 30

Part No. M N P Q R V X Z AA5801670000 �7 43 41 14 �7.5 7� 5.4 7 85801680000 34 43 49 15 34 94 �.4 8 10

�08 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

End plate left, End plate right▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Can be assembled into blocks

5810_30�_e

Ambient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airWorking pressure min./max. -1 bar / 1� barSurface paintedExhaust (3,5) unrestricted exhaust

Ports separated

Materials:Subbase Die-cast aluminum, black paintedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Fig. Part No.Input Exhaust

[1] [3 / 5] [kg]

ISO 1G 1/4 G 1/4 0.15 Fig. 1 5801850000

- - 0.08 Fig. � 5801860000

�09Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

D581_�31_d

* n = Number of subbases. ** Alternative port openings, closed with plugs

Part No. B C E J K L M P Q R V5801850000 ISO 1 G 1/4 G 1/4 �� 14.5 100 �5 �7 41 - �7.5 7�5801860000 ISO 1 - - - - 100 �5 - 41 14 �7.5 7�

Part No. X Z5801850000 5.4 75801860000 5.4 -

�10 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Blanking plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1

00104044

Ambient temperature min./max. +0°C / +80°CMedium temperature min./max. +0°C / +80°CMedium Compressed airWorking pressure min./max. -0.9 bar / 1� barMounting screw with hexagon socket

Materials:Seals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Type Size Weight Part No.[kg]

Blanking plate ISO 1 0.07� 1825503282Gasket ISO 1 - - 1821015028

Scope of delivery incl. seal and mounting screws

Dimensions

00108448

�11Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Blanking plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1

5810-3�1

Ambient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airWorking pressure min./max. -1 bar / 1� barNumber of valve positions 1Surface painted

Materials:Housing Die-cast aluminum, black paintedSubbase Die-cast aluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Weight Part No.[kg]

ISO 1 0.055 5801870000

Scope of delivery incl. seal and mounting screws

Dimensions

001�8858

Part No. A B C D E F5801870000 �9 39 7 � ‒ ‒

�1� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Throttle plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1

001074�3

Ambient temperature min./max. +0°C / +80°CMedium temperature min./max. +0°C / +80°CMedium Compressed airWorking pressure min./max. 0 bar / 1� bar

Materials:Subbase AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Weight Part No.[kg]

ISO 1 0.�55 0821201023

Scope of delivery incl. seal and mounting screws

Dimensions

001074�5_a

Part No. A B C D E F G G1 H J K K10821201023 1�.3 11,1 105.� 95.� 80 3 ��,5 8.5 ��.5 4.5 9 10.8

Part No. L M N O P R S SW1 SW2 T U W0821201023 1�.3 �8 5.5 5.� 3� 18 18 8 3 �7 9 9

Part No. X Y Z Z10821201023 �5 40 M5 M5–9

�13Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Pressure regulator for vertical stacking▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Controlled connection: 1, 2, 4, 2, 4

001�3548

Working pressure min./max. -- / 1� barAmbient temperature min./max. +5°C / +50°CMedium Compressed airMax. particle size 5 µmOil content of compressed air 0 mg/m³ - 5 mg/m³

Materials:Housing ZincSeals butadiene rubber

Frame size Adjustment range min./max.

Controlled con-nection

Weight Note Part No.

[bar] [kg]

ISO 1 0.5 / 1� 1

1.15 1) 0821302048

1.19 �) 0821302060

ISO 1 0.5 / 1� �

1.15 1) 0821302054

1.19 �) 0821302062

ISO 1 0.5 / 1� 4

1.15 1) 0821302057

1.19 �) 0821302063

ISO 1 0.5 / 1� �, 41.57 1) 0821302051

1.�1 �) 0821302061

1) with pressure gauge�) with pressure gauge and adapterScope of delivery incl. seal and mounting screwspressure regulator without gauge adapter, cannot be combined with IS1� ISO valves

�14 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Flow rate characteristic

001074�1 00107�73

controlled connection 1Controlled connection �Controlled connection 4

Controlled connection �/4

Dimensions

001074��

�15Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Transition plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 - ISO 2 ▶ Can be assembled into blocks ▶ Reversed pressure supply permissible

00107448

Ambient temperature min./max. -15°C / +70°CMedium temperature min./max. -15°C / +80°CMedium Compressed airWorking pressure min./max. -0.95 bar / 1� barMounting screw hexagon headExhaust (3,5) unrestricted exhaust

Ports separated

Materials:Housing AluminumSubbase AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Weight Fig. Part No.[kg]

ISO 1 - ISO � 0.�95 Fig. 1 1825503164

Fig. 1

00107450

�1� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Fig. 2

00107451

Fig. 3

0010745�

�17Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

End plates for adapter plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 - ISO 2 ▶ Can be assembled into blocks ▶ Reversed pressure supply permissible

00107��1

Ambient temperature min./max. -15°C / +70°CMedium temperature min./max. -15°C / +80°CMedium Compressed airWorking pressure min./max. -0.95 bar / 1� barMounting screw hexagon headDirection of pneumatic port (1) On the sideDirection of pneumatic port (3,5) On the sideExhaust (3,5) With directional exhaust (3/5)

Ports separated

Materials:Subbase Die-cast aluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Note Part No.Input Exhaust

[1] [3 / 5] [kg]ISO 1 - ISO � G 3/8 G 3/8 0.�55 1) 1825503244

1) Scope of delivery: end plate size 1 + end plate size ��) Scope of delivery: end plate size 1 + end plate size 33) Scope of delivery: end plate size � + end plate size 3Scope of delivery incl. seal and mounting screws

00107457_a

�18 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Supply plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Can be assembled into blocks ▶ Plate principle

00107433

Medium Compressed airWorking pressure min./max. 1 bar / 10 barGrid dimension 30 mmMounting screw with hexagon socketDirection of pneumatic port (1) UpExhaust (3,5) With directional exhaust (3/5)

Materials:Housing AluminumSubbase AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Part No.Input Exhaust

[1] [3 / 5] [kg]ISO 1 G 3/8 G 3/8 0.�� 1825503314

Scope of delivery incl. seal and mounting screws

�19Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

0010744�

Seal for supply plate▶ standard:ISO 5599-1 ▶ Frame size:ISO 1

00109949

Part No. Type Ambient temperature min./max.

MaterialSeal

Weight[kg]

Delivery quantity

[Piece]1821015047 Molded seal, separate channel 1, con-

nect channels 5 and 3-�0 / 70 Acrylonitrile Butadiene

Rubber0.004 1

1821015043 Molded seal, separate channels 1, 3 and 5

-�0 / 70 Acrylonitrile Butadiene Rubber

0.01 1

��0 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Angle subplate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ compressed air connection output: G 1/4

P581_185

Ambient temperature min./max. -15°C / +80°CMedium temperature min./max. -15°C / +80°CMedium Compressed airWorking pressure min./max. 0 bar / 10 barMounting screw with hexagon socketDirection of pneumatic port (�,4) On the side

Materials:Subbase AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Note Part No.

Output[2 / 4] [kg]

ISO 1 G 1/40.413 - 18255031700.401 1) 1825503324

1) With thread connection for differential pressure sensor

��1Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

00108449

Part No. A B C D E F G H J K L M1825503170 37 �5 1� �� G 1/4 5,7 Ø 10 Ø 5,5 110 95 71 131825503324 37 �5 1� �� G 1/4 5,7 Ø 10 Ø 5,5 110 95 71 13

Part No. N O P R S1825503170 1,5 3 7,5 4� 811825503324 1,5 3 7,5 4� 81

Blanking piece▶ standard:ISO 5599-1 ▶ Frame size:ISO 1 - ISO 3

0010�8�7

ØD

6,8

ØD

1

ØD

2

00130480

��� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Part No. Type Ø D Ø D1 Ø D2 Ambient tempera-ture

min./max.

Material

1820220021 ISO 1 1�.� 11.8 15.8 -15 / 80 Aluminum

Part No. MaterialSeal

Weight[kg]

1820220021 Acrylonitrile Butadi-ene Rubber

0.008

Accessories, for intermediate plates▶ standard:ISO 5599-1 ▶ Frame size:ISO 1

0013�404

Part No. Type Delivery quantity

[Piece]1820210041 O-ring, Ø 17 mm, 1�x�,�� �01827009767 Mounting screw 10

��3Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Transition plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 - ISO 2 ▶ Can be assembled into blocks ▶ Reversed pressure supply permissible

574�-141

Ambient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airWorking pressure min./max. -1 bar / 1� barSurface paintedExhaust (3,5) unrestricted exhaust

Ports separated

Materials:Subbase Die-cast aluminum, black paintedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.■ The transition plate is used for combining subbases of different sizes in the same manifold.

Size Weight Part No.[kg]

ISO 1 - ISO � 0.�7 5802520000

Scope of delivery incl. seal and mounting screws

Dimensions

D898_14�_a

��4 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Supply plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Reversed pressure supply permissible

574�-171

Ambient temperature min./max. -�5°C / +70°CMedium temperature min./max. -�5°C / +70°CMedium Compressed airWorking pressure min./max. -0.95 bar / 1� barMounting screw hexagon headDirection of pneumatic port (1) DownDirection of pneumatic port (3,5) Down

Ports separated

Materials:Subbase AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Part No.Input Exhaust

[1] [3 / 5] [kg]ISO 1 G 3/8 G 3/8 0.395 8985041162

Scope of delivery incl. seal and mounting screws

Dimensions

D581_190

Blanking piece▶ standard:ISO 5599-1 ▶ Frame size:ISO 1 - ISO 2

P581_191

��5Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Part No. Type Ambient temperature min./max.

Material MaterialSeal

5801530000 ISO 1 -�0 / 70 Brass Acrylonitrile Butadiene Rubber

Part No. Weight[kg]

Note

5801530000 0.011 1)

1) Only for channel 1

��� Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Supply plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 ▶ Can be assembled into blocks ▶ Plate principle

00107433

Medium Compressed airWorking pressure min./max. 1 bar / 10 barGrid dimension 30 mmMounting screw with hexagon socketDirection of pneumatic port (1) UpExhaust (3,5) With directional exhaust (3/5)

Materials:Housing AluminumSubbase AluminumSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.

Size Compressed air connection Weight Part No.Input Exhaust

[1] [3 / 5] [kg]ISO 1 G 3/8 G 3/8 0.�� 1825503314

Scope of delivery incl. seal and mounting screws

��7Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

0010744�

Seal for supply plate▶ standard:ISO 5599-1 ▶ Frame size:ISO 1

00109949

Part No. Type Ambient temperature min./max.

MaterialSeal

Weight[kg]

Delivery quantity

[Piece]1821015047 Molded seal, separate channel 1, con-

nect channels 5 and 3-�0 / 70 Acrylonitrile Butadiene

Rubber0.004 1

1821015043 Molded seal, separate channels 1, 3 and 5

-�0 / 70 Acrylonitrile Butadiene Rubber

0.01 1

��8 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Transition plate▶ standard: ISO 5599-1 ▶ Frame size: ISO 1 - ISO 2 ▶ for ISO 1, ISO 2

5810-341

Ambient temperature min./max. -�0°C / +70°CMedium temperature min./max. -�0°C / +70°CMedium Compressed airWorking pressure min./max. -1 bar / 1� barSurface paintedExhaust (3,5) unrestricted exhaust

Ports separated

Materials:Subbase Die-cast aluminum, black paintedSeals Acrylonitrile Butadiene Rubber

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The oil content of air pressure must remain constant during the life cycle.■ Use only the approved oils from Bosch Rexroth, see chapter „Technical information“.■ The transition plate is used for combining subbases of different sizes in the same manifold.

Size Weight Part No.[kg]

ISO 1 - ISO � 0.17 5802610000

Scope of delivery incl. mounting screws

��9Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Dimensions

001�8887

Part No. A B C D E F G H J K L M5802610000 8� 1�� 30 100 �5 �7 19 108 15 1�.5 M� M5

Sealing kit▶ standard:ISO 5599-1

P581_033

Part No. Port Type Ambient temperature min./max.

Material

5801880000 G 1/8 ISO 1 -�0 / 70 Brass

Part No. MaterialSeal

Weight[kg]

5801880000 Acrylonitrile Butadi-ene Rubber

0.01�

�30 Bosch Rexroth AG | Pneumatics

Valve terminal systems → Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581Accessories

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of �011-07-�8, © Bosch Rexroth AG, subject to change

Blanking piece, Subbases ISO 5599-1▶ standard:ISO 5599-1 ▶ Frame size:ISO 1 - ISO 3 ▶ for Thread connection on bottom

P581_191

D581_19�

Part No. Type A D D1 D2 Ambient tempera-ture

min./max.8985049012 ISO 1 �.� 1�.� 14.8 1�.5 -�5 / 70

Part No. Material MaterialSeal

8985049012 Brass Acrylonitrile Butadi-ene Rubber

according to VDMA �4 345, form C/D

Bosch Rexroth AGPneumaticsUlmer Straße 4D - 30880 LaatzenPhone +49 511 2136 - 0Fax +49 511 2136 - 2 69sales-pneumatics@boschrexroth.dewww.boschrexroth.com/pneumatics

The data specifi ed above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judg-ment and verifi cation. It must be remembered that our products are subject to a natural process of wear and aging.

© This document, as well as the data, specifi cations and other informations set forth in it, are the exclusive property of Bosch Rex-roth AG. Without their consent it may not be reproduced or given to third parties.

Subject to modifi cations.

Online-PDF

Your contact:CanadaBosch Rexroth Canada Corp.3426 Mainway DriveBurlington, Ontario L7M 1A8Tel. +1 905 335-5511Fax +1 905 335-4184

AustraliaBosch Rexroth Pty. Ltd.3 Valediction RoadKings Park NSW 2148SydneyTel. +61 2 9831-7788Fax +61 2 9831-5553

U.S.A.Bosch Rexroth Corp.1953 Mercer RoadLexington, KY 40511-1021KentuckyTel. +1 859 254-8031Fax +1 859 254-4188

Great BritainBosch Rexroth Ltd.Broadway LaneSouth CerneyCirencester, GL7 5UHGloucestershireTel. +44 1285 86-3000Fax +44 1285 86-3003

further contacts:www.boschrexroth.com/addresses

�8-07-�011