ISO Update · ISO Update, Supplement to ISO ... ISO/CD 19281 Air cargo — Fire resistant...
Transcript of ISO Update · ISO Update, Supplement to ISO ... ISO/CD 19281 Air cargo — Fire resistant...
ISO Update
Supplement to ISOFocus November 2013
ISO Update, Supplement to ISO Focus -- November 2013 1
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 October to 31 October 2013
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 20 Aircraft and space vehicles
ISO/CD 19281 Air cargo — Fire resistant containers — Design, performance and testing requirements
TC 22 Road vehicles
ISO/CD 10924-1
Road vehicles — Circuit breakers — Part 1: Definitions and general test requirements
ISO/CD 10924-4
Road vehicles — Circuit breakers — Part 4: Medium circuit breakers with tabs (Blade type), Form CB15
ISO/CD 10924-5
Road vehicles — Circuit breakers — Part 5: Circuit breakers with tabs with rated voltage of 450 V
ISO/DTR 12349-1
Road vehicles — Dummies for restraint system testing — Part 1: Adult dummies
ISO/DTR 12349-2
Road vehicles — Dummies for restraint system testing — Part 2: Child dummies
TC 23 Tractors and machinery for agriculture and forestry
ISO/CD 789-3 Agricultural tractors — Test procedures — Part 3: Turning and clearance diameters
ISO/CD 18497 Safety of highly automated agricultural machines
TC 28 Petroleum products and lubricants
ISO/DTR 19511-1
Petroleum products — Equivalency of test method determining the same property — Part 1: Atmospheric distillation of petroleum products
TC 29 Small tools
ISO/CD 6789-1 Assembly tools for screws and nuts — Hand torque tools — Requirements and test methods for design conformance testing, quality con-formance testing and recalibration procedure — Part 1: Requirements and test method for design conformance testing, quality conform-ance testing and calibration procedure
ISO/CD 6789-2 Assembly tools for screws and nuts — Hand torque tools — Requirements and test methods for design conformance testing, quality con-formance testing and recalibration procedure — Part 2: Requirements for calibration and determination of measurement uncertainly
TC 31 Tyres, rims and valves
ISO/CD 4000-1 Passenger car tyres and rims — Part 1: Tyres (metric series)
TC 34 Food products
ISO/CD 17780 Animal and vegetable fats and oils — Determi-nation of aliphatic hydrocarbons in vegetable oils
ISO/CD 13299 Sensory analysis — Methodology — General guidance for establishing a sensory profile
TC 36 Cinematography
ISO/CD 2969 Cinematography — B-chain electro-acoustic reponse of motion-picture control rooms and indoor theatres — Specifications and measurements
TC 38 Textiles
ISO/CD 17751-1
Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 1: Light Microscopy method
ISO/CD 17751-2
Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 2: Scanning Electron Micros-copy method
ISO/CD 105-G01
Textiles — Tests for colour fastness — Part G01: Colour fastness to nitrogen oxides
ISO/CD 105-G04
Textiles — Tests for colour fastness — Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
TC 43 Acoustics
ISO/CD 16717-1
Accoustics — Evaluation of sound insulation spectra by single-numbers — Part 1: Airborne sound insulation
TC 44 Welding and allied processes
ISO/CD 19288 Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of mag-nesium and magnesium alloys — Classification
TC 45 Rubber and rubber products
ISO/CD 48 Rubber, vulcanized or thermoplastic — Deter-mination of hardness (hardness between 10 IRHD and 100 IRHD)
TC 61 Plastics
ISO/CD 16620-4
Plastics — Biobased content — Part 4: Deter-mination of the total biobased mass content
ISO/CD 18188 Plastic straws for food — Specification
TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries
ISO/CD 14692-1
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vo-cabulary, symbols, applications and materials
ISO/CD 14692-2
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
ISO/CD 14692-3
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
2 ISO Update, Supplement to ISO Focus -- November 2013
ISO/CD 14692-4
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO/CD 18319 Fibre-reinforced polymer (FRP) reinforcement for concrete structures: Specifications of FRP sheets
TC 106 Dentistry
ISO/CD 18556 Dentistry — Heidemann spatulas
ISO/CD 18559 Dentistry — Spatulas for dental materials
TC 110 Industrial trucks
ISO/CD 10896-5
Rough-terrain trucks — Safety requirements and verification — Part 5: Interface between rough-terrrain truck and integrated personnel work platform
ISO/CD 10896-7
Rough-terrain trucks — Safety requirements and verification — Part 7: Longitudinal load moment systems
ISO/CD 18479-1
Rough-terrain trucks — Non-integrated personnel work platforms — Part 1: Design requirements
ISO/CD 22915-24
Industrial trucks — Verification of stability — Part 24: Slewing variable-reach trucks
TC 118 Compressors and pneumatic tools, machines and equipment
ISO/CD 18740 Turbocompressors — Performance test code — Complementary to ISO 5389
TC 127 Earth-moving machinery
ISO/CD 14990-1
Earth-moving machinery — Electrical safety of machines utilising electric drives and related components and systems — Part 1: General Requirements
ISO/CD 14990-2
Earth-moving machinery — Electrical safety of machines ut ilising electric drives and related components and systems — Part 2: Particular requirements for externally-powered machines
ISO/CD 14990-3
Earth-moving·machinery·--·Electrical·safety·of·machines·utilising·electric·drives·and·related·components·and·systems — Part 3: Particular requirements for self-powered machines
TC 135 Non-destructive testing
ISO/CD 18249 Non-destructive testing — Acoustic emis-sion — Testing of fibre reinforced polymers — Specific methodology and general evaluation criteria
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 18488 Polyethylene pipes — Resistance to slow crack growth — Strain Hardening test method
ISO/CD 18489 Polyethylene pipes — Resistance to slow crack growth — Cracked Round Bar test method
ISO/CD 8639 Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktight-ness of flexible joints
TC 142 Cleaning equipment for air and other gases
ISO/CD 16890-2
Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance
TC 146 Air quality
ISO/CD 12219-7
Interior air of road vehicles — Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements
TC 150 Implants for surgery
ISO/CD 14243-4
Implants for surgery — Wear of total knee pros-theses — Part 4: Wear of the patella-femoral joint — Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
TC 159 Ergonomics
ISO/CD 20685-2
3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO 23550:2011/CD Amd 1
Safety and control devices for gas burners and gas-burning appliances — General require-ments — Amendment 1
TC 171 Document management applications
ISO/CD 22938 Document management — Electronic content/document management (CDM) data inter-change format
TC 172 Optics and photonics
ISO/CD 14490-5
Optics and optical instruments — Test meth-ods for telescopic systems — Part 5: Test methods for transmittance
TC 194 Biological evaluation of medical devices
ISO/DTR 10993-33
Biological evaluation of medical devices — Supplement to ISO 10993-3 — Guidance on tests to evaluate genotoxicity — Part 33:
TC 199 Safety of machinery
ISO/CD 19353 Safety of machinery — Fire prevention and protection
TC 201 Surface chemical analysis
ISO/DTS 18507
Surface Chemical Analysis - Technical Speci-fication for the use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
ISO/CD 17109 Surface chemical analysis — Depth profiling — A method for sputter rate determination in X-ray photoelectron spectroscopy, Auger elec-tron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using multi-layer thin films
TC 204 Intelligent transport systems
ISO/CD 14827-3
Intelligent transport systems — Data interfaces between centres for transport information and control systems — Part 3: Data interfaces be-tween centres for intelligent transport systems (ITS) using XML
TC 215 Health informatics
ISO/DTR 14639-2
Health informatics — Capacity-based eHealth architecture roadmap — Part 2: Architectural components and maturity model
TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
ISO/CD 24521 Basic on-site domestic wastewater services
TC 229 Nanotechnologies
ISO/DTR 17302
Nanotechnologies — Framework for identifying vocabulary development for nanotechnology applications in human healthcare
TC 257 General technical rules for determina-tion of energy savings in renovation projects, industrial enterprises and regions
ISO Update, Supplement to ISO Focus -- November 2013 3
ISO/CD 17741 General technical rules for measurement, calculation and verification of energy savings of projects
JTC 1 Information technology
ISO/IEC 10646/PDAM 1
Information technology — Universal Coded Character Set (UCS) — Amendment 1: Nushu, Tamil supplement, and other characters
ISO/IEC 10373-6:2011/DAmd 7
Identification cards — Test methods — Part 6: Proximity cards — Amendment 7: Frame with error correction
ISO/IEC 15693-3:2009/PDAM 2
Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticol-lision and transmission protocol — Amendment 2: Clarification of use of Data Elements
ISO/IEC 15693-3:2009/PDAM 4
Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticol-lision and transmission protocol — Amendment 4: Adding security framework
ISO/IEC PDTS 18822
Technical Specification — File System
ISO/IEC CD 16963
Information technology — Digitally recorded media for information interchange and storage — Test method for the estimation of lifetime of optical media for long-term data storage
DIS circulated
Period from 01 October to 31 October 2013
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
PC 259 Outsourcing
ISO/DIS 37500 * Guidance on outsourcing
2014-01-08
TC 4 Rolling bearings
ISO/DIS 21107 * Rolling bearings and spheri-cal plain bearings — Search structure for electronic media — Characteristics and performance criteria identified by attribute vocabulary
2014-01-08
(Revision of ISO 21107:2004)
TC 6 Paper, board and pulps
ISO/DIS 12625-9
* Tissue paper and tissue prod-ucts — Part 9: Determination of ball burst strength
2014-03-18
(Revision of ISO 12625-9:2005)
TC 17 Steel
ISO/DIS 11970 * Specification and approval of welding procedures for produc-tion welding of steel castings
2014-03-04
(Revision of ISO 11970:2001)
ISO/DIS 11972 * Corrosion-resistant cast steels for general applications
2014-01-04
(Revision of ISO 11972:1998)
ISO/DIS 11973 * Heat-resistant cast steels and alloys for general applications
2014-01-04
(Revision of ISO 11973:1999)
ISO/DIS 13520 * Determination of ferrite content in austenitic stainless steel castings
2014-01-04
(Revision of ISO 13520:2002)
ISO/DIS 13521 * Austenitic manganese steel castings
2014-01-04
(Revision of ISO 13521:1999)
ISO/DIS 13583-1
* Centrifugally cast steel and alloy products — Part 1: General test-ing and tolerances
2014-01-04
(Revision of ISO 13583-1:2000)
ISO/DIS 13583-2
* Centrifugally cast steel and alloy products — Part 2: Heat resistant materials
2014-01-04
(Revision of ISO 13583-2:2003)
ISO/DIS 14737 * Cast non-alloy and low alloy steels for general applications
2014-01-04
(Revision of ISO 14737:2003)
ISO/DIS 16468 * Investment castings (steel, nickel alloys and cobalt alloys) — Gen-eral technical requirements
2014-01-04
(Revision of ISO 16468:2005)
ISO/DIS 19960 * Cast steels and alloys with spe-cial physical properties
2014-01-04
(Revision of ISO 19960:2005)
TC 20 Aircraft and space vehicles
ISO/DIS 14085-1
* Aerospace series — Hydraulic filter elements — Test methods — Part 1: Test sequence
2014-01-24
ISO/DIS 14085-2
* Aerospace series — Hydraulic filter elements — Test methods — Part 2: Conditioning
2014-01-24
ISO/DIS 14085-3
* Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity
2014-01-24
ISO/DIS 14085-4
* Aerospace series — Hydraulic filter elements — Test methods — Part 4: Verification of col-lapse/burst pressure rating
2014-01-24
ISO/DIS 14085-5
* Aerospace series — Hydraulic filter elements — Test methods — Part 5: Resistance to flow fatigue
2014-01-24
ISO/DIS 14085-6
* Aerospace series — Hydraulic filter elements — Test methods — Part 6: Initial cleanliness level
2014-01-24
TC 22 Road vehicles
4 ISO Update, Supplement to ISO Focus -- November 2013
ISO/DIS 11451-3.2
* Road vehicles — Vehicle test methods for electrical dis-turbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation
(Revision of ISO 11451-3:2007)
TC 23 Tractors and machinery for agriculture and forestry
ISO/DIS 9635-4
* Agricultural irrigation equipment — Irrigation valves — Part 4: Air valves
2014-01-17
(Revision of ISO 9635-4:2006)
ISO/DIS 15639-1.2
* Radio frequency identification of animals — Standardization of injection sites for different animal species — Part 1: Companion animals (cats and dogs)
2013-12-10
TC 28 Petroleum products and lubricants
ISO/DIS 6743-4
* Lubricants, industrial oils and related products (class L) — Classification — Part 4: Family H (Hydraulic systems)
2014-03-04
(Revision of ISO 6743-4:1999)
TC 29 Small tools
ISO 3919:2005/DAmd 1
* Coated abrasives — Flap wheels with shaft — Amendment 1
2014-01-22
TC 35 Paints and varnishes
ISO/DIS 3233-3
* Paints and varnishes — Determi-nation of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter con-tent determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
2014-03-18
(Revision of ISO 23811:2009)
ISO/DIS 8502-2
* Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Labora-tory determination of chloride on cleaned surfaces
2014-03-04
(Revision of ISO 8502-2:2005)
ISO/DIS 8502-12
* Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanli-ness — Part 12: Field method for the titrimetric determination of water-soluble ferrous ions
2014-03-04
(Revision of ISO 8502-12:2003)
TC 37 Terminology and other language and content resources
ISO/DIS 13611.2
* Interpreting — Guidelines for community interpreting
2013-12-22
TC 38 Textiles
ISO/DIS 13629-2
* Textiles — Determination of anti-fungal activity of textile products — Part 2: Plate count method
2014-01-24
TC 43 Acoustics
ISO/DIS 1683 * Acoustics — Preferred reference values for acoustical and vibra-tory levels
2014-03-04
(Revision of ISO 1683:2008)
ISO/DIS 16283-2
* Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation
2014-03-11
(Revision of ISO 140-7:1998, ISO 140-14:2004)
TC 44 Welding and allied processes
ISO/DIS 16237 * Mechanical joining — Destruc-tive testing of joints — Specimen dimensions and test procedure for cross-tension testing of single joints
2014-01-15
TC 45 Rubber and rubber products
ISO/DIS 5772 * Rubber and Plastic Hoses and Hose Assemblies for meas-ured fuel dispensing systems — Specification
2014-01-10
(Revision of ISO 5772:1998)
ISO/DIS 13363 * Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification
2014-01-10
(Revision of ISO 13363:2004, ISO 13363:2004/Cor 1:2008)
TC 46 Information and documentation
ISO/DIS 21127 * Information and documentation — A reference ontology for the interchange of cultural heritage information
2014-01-10
(Revision of ISO 21127:2006)
ISO/DIS 17316 * Information and documenta-tion — International standard link identifier (ISLI)
TC 48 Laboratory equipment
ISO/DIS 384 * Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
(Revision of ISO 384:1978)
ISO/DIS 3819 * Laboratory glassware — Beakers
(Revision of ISO 3819:1985)
ISO/DIS 4796-1
* Laboratory glassware — Bottles — Part 1: Screw-neck bottles
(Revision of ISO 4796-1:2000)
ISO/DIS 16496 * Laboratory glassware — Vac-uum-jacketed vessels for heat insulation
TC 58 Gas cylinders
ISO/DIS 11119-4
* Gas cylinders — Refillable com-posite gas cylinders and tubes — Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 L with load-sharing welded metal-lic liners
2014-01-16
TC 59 Buildings and civil engi-neering works
ISO Update, Supplement to ISO Focus -- November 2013 5
ISO/DIS 16757-1
* Product Data for Building Services System Models — Part 1: Concepts, architecture and model
2014-01-10
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/DIS 19901-5
* Petroleum and natural gas indus-tries — Specific requirements for offshore structures — Part 5: Weight control during engineer-ing and construction
2014-03-04
(Revision of ISO 19901-5:2003)
TC 70 Internal combustion engines
ISO/DIS 8178-7
* Reciprocating internal combus-tion engines — Exhaust emission measurement — Part 7: Engine family determination
2014-01-05
(Revision of ISO 8178-7:1996)
ISO/DIS 8178-8
* Reciprocating internal combus-tion engines — Exhaust emission measurement — Part 8: Engine group determination
2014-01-05
(Revision of ISO 8178-8:1996)
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO/DIS 15673 * Guidelines for the simplified design of structural reinforced concrete for buildings
2014-01-10
(Revision of ISO 15673:2005)
ISO/DIS 10406-1
* Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids
2014-01-08
(Revision of ISO 10406-1:2008)
ISO/DIS 10406-2
* Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets
2014-01-08
(Revision of ISO 10406-2:2008)
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceuti-cal use
ISO/DIS 1135-4
* Transfusion equipment for medi-cal use — Part 4: Transfusion sets for single use, gravity feed
2014-03-04
(Revision of ISO 1135-4:2012)
ISO/DIS 1135-5
* Transfusion equipment for medi-cal use — Part 5: Transfusion sets for single use with pressure infusion apparatus
2014-03-04
(Revision of ISO 1135:1977, ISO 1135-4:2012)
ISO/DIS 3826-4
* Plastics collapsible contain-ers for human blood and blood components — Part 4: Aphaer-esis blood bag systems with integrated features
2014-03-11
TC 94 Personal safety -- Pro-tective clothing and equipment
ISO/DIS 12312-2
* Eye and face protection — Sun-glasses and related eyewear — Part 2: Filters for direct observa-tion of the sun
ISO/DIS 16900-8
* Respiratory protective devices — Methods of test and test equip-ment — Part 8: Measurement of RPD air flow rates of assisted filtering RPD
2014-01-15
TC 96 Cranes
ISO/DIS 11660-2
* Cranes — Access, guards and restraints — Part 2: Mobile cranes
2014-01-10
(Revision of ISO 11660-2:1994)
ISO/DIS 11662-2
* Cranes — Experimental deter-mination of crane performance — Part 2: Structural competence under static loading
ISO/DIS 4306-3
* Cranes — Vocabulary — Part 3: Tower cranes
2014-01-10
(Revision of ISO 4306-3:2003, ISO 4306-3:2003/Amd 1:2011)
ISO/DIS 17096 * Cranes — Safety — Load lifting attachments
2014-01-29
TC 106 Dentistry
ISO/DIS 4823 * Dentistry — Elastomeric impres-sion materials
2014-03-11
(Revision of ISO 4823:2000, ISO 4823:2000/Cor 1:2004, ISO 4823:2000/Amd 1:2007)
TC 110 Industrial trucks
ISO/DIS 22915-12
* Industrial trucks — Verification of stability — Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer
2014-01-24
TC 130 Graphic technology
ISO/DIS 16760 * Graphic technology — Prepress data exchange — Preparation and visualization of RGB images to be used in RGB-based graph-ics arts workflows
2014-01-29
TC 131 Fluid power systems
ISO/DIS 10762 * Hydraulic fluid power — Mount-ing dimensions for cylinders, 10 MPa (100 bar) series [Revision of ISO 10762: 1997]
2014-01-16
(Revision of ISO 10762:1997)
TC 145 Graphical symbols
ISO 7001:2007/DAmd 52
* Graphical symbols — Public information symbols — Amend-ment 52: Symbol PI CF 012: Foot care or podiatry
2014-01-18
ISO 7001:2007/DAmd 53
* Graphical symbols — Public information symbols — Amend-ment 53: Symbol PI CF 015: Barber or hair salon
2014-01-18
ISO 7001:2007/DAmd 54
* Graphical symbols — Public information symbols — Amend-ment 54: Symbol PI CF 016: Cinema
2014-01-18
6 ISO Update, Supplement to ISO Focus -- November 2013
ISO 7001:2007/DAmd 55
* Graphical symbols — Public information symbols — Amend-ment 55: Symbol PI CF 017: Car repair workshop
2014-01-18
ISO 7001:2007/DAmd 56
* Graphical symbols — Public information symbols — Amend-ment 56: Symbol PI CF 018: Wireless LAN
2014-01-18
ISO 7001:2007/DAmd 58
* Graphical symbols — Public information symbols — Amend-ment 58: Symbol PI PF 067: Pedestrian underpass
2014-01-18
ISO 7001:2007/DAmd 59
* Graphical symbols — Public information symbols — Amend-ment 59: Symbol PI PF 068: Baggage delivery
2014-01-18
ISO 7001:2007/DAmd 60
* Graphical symbols — Public information symbols — Amend-ment 60: Symbol PI TF 037: Security check
2014-01-18
ISO 7001:2007/DAmd 62
* Graphical symbols — Public information symbols — Amend-ment 62: Symbol PI PB 008: Surveillance camera
2014-01-18
ISO 7001:2007/DAmd 63
* Graphical symbols — Public information symbols — Amend-ment 63: Symbol PI PF 069: Baggage assistant
2014-01-18
ISO 7001:2007/DAmd 64
* Graphical symbols — Public information symbols — Amend-ment 64: Symbol PI PF 070: Embassy
2014-01-18
ISO 7001:2007/DAmd 65
* Graphical symbols — Public information symbols — Amend-ment 65: Symbol PI TC 017: Beach
2014-01-18
ISO 7001:2007/DAmd 66
* Graphical symbols — Public information symbols — Amend-ment 66: Symbol PI TC 018: Planetarium
2014-01-18
ISO 7001:2007/DAmd 67
* Graphical symbols — Public information symbols — Amend-ment 67: Symbol PI TF 030: Baggage weighing
2014-01-18
ISO 7001:2007/DAmd 72
* Graphical symbols — Public information symbols — Amend-ment 72: Symbol PI TF 035: Water taxi
2014-01-18
ISO 7001:2007/DAmd 73
* Graphical symbols — Public information symbols — Amend-ment 73: Symbol PI CF 010 Rev: Conference facilities or meeting room
2014-01-18
ISO 7010:2011/DAmd 172
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 172: Safety sign F016: Fire blanket
2014-01-22
ISO 7010:2011/DAmd 179
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 179: Safety sign W039: Warning; Falling ice
2014-01-22
ISO 7010:2011/DAmd 180
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 180: Safety sign W040: Warning; Roof avalanche
2014-01-22
TC 154 Processes, data ele-ments and documents in commerce, industry and administration
ISO/DIS 15000-5
* Electronic Business Extensible Markup Language (ebXML) — Part 5: Core Components Specification
2014-01-08
(Revision of ISO/TS 15000-5:2005, ISO/TS 15000-5:2005/Amd 1:2011)
TC 156 Corrosion of metals and alloys
ISO/DIS 17224 * Corrosion of metals and al-loys — Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
2014-01-22
ISO/DIS 17245 * Corrosion of metals and alloys — Test method for high tempera-ture corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
2014-01-22
ISO/DIS 17248 * Corrosion of metals and alloys — Test method for high tempera-ture corrosion testing of metallic materials by embedding in salt, ash, or other solids
2014-01-22
TC 159 Ergonomics
ISO/DIS 9241-392
* Ergonomics of human-system interaction — Part 392: Ergo-nomic recommendations for the reduction of visual fatigue from stereoscopic images
TC 168 Prosthetics and orthotics
ISO/DIS 16955 * Prosthetics — Quantification of physical parameters of ankle foot devices and foot units
TC 188 Small craft
ISO 10240:2004/DAmd 1
* Small craft — Owner's manual — Amendment 1
2014-03-25
TC 201 Surface chemical analysis
ISO/DIS 11775 * Surface chemical analysis — Scanning-probe microscopy — Determination of cantilever normal spring constants
2014-01-16
TC 204 Intelligent transport systems
ISO 14906:2011/DAmd 1
* Electronic fee collection — Ap-plication interface definition for dedicated short-range communi-cation — Amendment 1
2014-03-11
TC 211 Geographic information/Geomatics
ISO/DIS 19103 * Geographic information — Con-ceptual schema language
2014-01-05
(Revision of ISO/TS 19103:2005)
ISO/DIS 19109 * Geographic information — Rules for application schema
2014-03-11
(Revision of ISO 19109:2005)
TC 215 Health informatics
ISO/HL7 DIS 10781.2
* Electronic Health Record-System Functional Model, Release 2.0 (EHR FM)
2014-01-08
ISO Update, Supplement to ISO Focus -- November 2013 7
(Revision of ISO/HL7 10781:2009)
ISO/HL7 DIS 16527.2
* Personal Health Record System Functional Model, Release 1 (PHR-S FM)
2013-12-04
TC 228 Tourism and related services
ISO/DIS 13009 * Beaches — Criteria to render the service
2014-01-21
ISO/DIS 18065 * Natural Protected Areas - Tourist services for public use provided by Natural Protected Areas Authorities - Requirements
2014-01-08
JTC 1 Information technology
ISO/IEC DIS 13157-1
* Information technology — Tel-ecommunications and informa-tion exchange between systems — NFC Security — Part 1: NFC-SEC NFCIP-1 security services and protocol
2014-01-03
(Revision of ISO/IEC 13157-1:2010)
ISO/IEC DIS 19369
* Information technology — NFCIP-2 test methods
2014-01-03
ISO/IEC DIS 19395
* Smart Data Centre Resource Monitoring and Control
2014-01-22
ISO/IEC DIS 10646
* Information technology — Uni-versal Coded Character Set (UCS)
2014-01-15
(Revision of ISO/IEC 10646:2012, ISO/IEC 10646:2012/Amd 1:2013)
ISO/IEC DIS 24744
* Software Engineering — Metamodel for Development Methodologies
2014-01-08
(Revision of ISO/IEC 24744:2007, ISO/IEC 24744:2007/Amd 1:2010)
ISO/IEC DIS 8484
* Information technology — Mag-netic stripes on savingsbooks
2014-01-24
(Revision of ISO/IEC 8484:2007)
ISO/IEC 18013-3:2009/DAmd 2
* Information technology — Per-sonal identification — ISO-compliant driving licence — Part 3: Access control, authentica-tion and integrity validation — Amendment 2: Extended Access Control v1
ISO/IEC DIS 24775-1
* Information technology — Stor-age management — Part 1: Overview
(Revision of ISO/IEC 24775:2011)
ISO/IEC DIS 24775-2
* Information technology — Stor-age management — Part 2: Common Architecture
(Revision of ISO/IEC 24775:2011)
ISO/IEC DIS 24775-3
* Information technology — Stor-age management — Part 3: Common Profiles
(Revision of ISO/IEC 24775:2011)
ISO/IEC DIS 24775-4
* Information technology — Stor-age management — Part 4: Block Devices
(Revision of ISO/IEC 24775:2011)
ISO/IEC DIS 24775-5
* Information technology — Stor-age management — Part 5: File systems
(Revision of ISO/IEC 24775:2011)
ISO/IEC DIS 24775-6
* Information technology — Stor-age management — Part 6: Fabric
(Revision of ISO/IEC 24775:2011)
ISO/IEC DIS 24775-7
* Information technology — Stor-age management — Part 7: Host Elements
(Revision of ISO/IEC 24775:2011)
ISO/IEC DIS 24775-8
* Information technology — Stor-age management — Part 8: Media Libraries
(Revision of ISO/IEC 24775:2011)
ISO/IEC DIS 17629
* Information technology — Of-fice equipment — Method for measuring first print out time for digital printing devices
2014-01-29
ISO/IEC DIS 24734
* Information technology — Office equipment — Method for meas-uring digital printing productivity — Revision draft
(Revision of ISO/IEC 24734:2009)
ISO/IEC 13818-1:2013/DAmd 5
* Information technology — Ge-neric coding of moving pictures and associated audio infor-mation — Part 1: Systems — Amendment 5: Transport of MVC depth video sub-bitstream and extensions to support HEVC low delay coding mode
ISO/IEC 14496-5:2001/DAmd 32
* Information technology — Cod-ing of audio-visual objects — Part 5: Reference software — Amendment 32: Reference software multi-resolution 3D mesh compression
2014-01-17
ISO/IEC 14496-18:2004/DAmd 1
* Information technology — Cod-ing of audio-visual objects — Part 18: Font compression and streaming — Amendment 1: Updated semantics of decod-erSpecificInfo and font data description for ISOBMFF
2014-01-17
ISO/IEC 21000-8:2008/DAmd 3
* Information technology — Mul-timedia framework (MPEG-21) — Part 8: Reference software — Amendment 3: Contract Expression Language (CEL) and Media Contract Ontology (MCO) Reference Software
2014-01-17
ISO/IEC 23008-2/DAmd 1
* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding — Amendment 1: Range extensions
2014-01-17
8 ISO Update, Supplement to ISO Focus -- November 2013
ISO/IEC 23008-2/DAmd 2
* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding — Amendment 2: Multi-view extensions
2014-01-17
ISO/IEC DIS 23008-5
* Information technology — High efficiency coding and media delivery in heterogeneous environments
— Part 5: HEVC Conformance testing and reference software
2014-01-17
ISO/IEC DIS 23008-8
* Information technology — High efficiency coding and media de-livery in heterogeneous environ-ments — Part 8: Conformance Specification for HEVC
2014-01-17
ISO/IEC 29199-4:2010/DAmd 1
* Information technology — JPEG XR image coding system — Part 4: Conformance testing — Amendment 1: Additional JPEG XR conformance test streams
2014-01-17
ISO/IEC DIS 18004
* Information technology — Au-tomatic identification and data capture techniques — QR Code bar code symbology specification
2014-01-05
(Revision of ISO/IEC 18004:2006)
ISO/IEC DIS 30108-1
* Information Technology — Bio-metric Identity Assurance Ser-vices — Part 1: BIAS Services
2014-01-04
FDIS circulated
Period from 01 October to 31 October 2013
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
PC 251 Asset management
ISO/FDIS 55000
* Asset management — Overview, principles and terminology
2013-12-08
ISO/FDIS 55001
* Asset management — Manage-ment systems — Requirements
2013-12-08
ISO/FDIS 55002
* Asset management — Manage-ment systems — Guidelines for the application of ISO 55001
2013-12-08
TC 20 Aircraft and space vehicles
ISO/FDIS 16127
* Space systems — Preven-tion of break-up of unmanned spacecraft
2013-12-08
ISO/FDIS 16691
* Space systems — Thermal control coatings for spacecraft — General requirements
2013-12-26
ISO/FDIS 16695
* Space environment (natural and artificial) — Geomagnetic refer-ence models
2013-12-08
TC 22 Road vehicles
ISO/FDIS 8820-2
* Road vehicles — Fuse-links — Part 2: User guidelines
(Revision of ISO 8820-2:2005)
ISO/FDIS 10924-2
* Road vehicles — Circuit break-ers — Part 2: User's guide
2013-12-26
TC 28 Petroleum products and lubricants
ISO/FDIS 22854
* Liquid petroleum products — Determination of hydrocar-bon types and oxygenates in automotive-motor gasoline — Multidimensional gas chroma-tography method
2013-12-11
(Revision of ISO 22854:2008)
TC 29 Small tools
ISO/FDIS 2351-3
* Assembly tools for screws and nuts — Machine-operated screwdriver bits — Part 3: Screwdriver bits for hexagon socket screws
2013-12-10
(Revision of ISO 2351-3:2002)
TC 34 Food products
ISO/FDIS 8968-1
* Milk and milk products — De-termination of nitrogen content — Part 1: Kjeldahl principle and crude protein calculation
2013-12-18
(Revision of ISO 5549:1978, ISO 8968-1:2001, ISO 8968-2:2001)
ISO/FDIS 6539 * Cinnamon (Cinnamomum zey-lanicum Blume) — Specification
2013-12-22
(Revision of ISO 6539:1997)
TC 38 Textiles
ISO/FDIS 2403 * Textiles — Cotton fibres — De-termination of micronaire value
2013-12-26
(Revision of ISO 2403:1972)
ISO/FDIS 13935-1
* Textiles — Seam tensile proper-ties of fabrics and made-up tex-tile articles — Part 1: Determina-tion of maximum force to seam rupture using the strip method
2014-01-11
(Revision of ISO 13935-1:1999)
ISO/FDIS 13935-2
* Textiles — Seam tensile proper-ties of fabrics and made-up tex-tile articles — Part 2: Determina-tion of maximum force to seam rupture using the grab method
2014-01-11
(Revision of ISO 13935-2:1999)
TC 41 Pulleys and belts (including veebelts)
ISO Update, Supplement to ISO Focus -- November 2013 9
ISO/FDIS 1813 * Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test
2013-12-08
(Revision of ISO 1813:1998)
TC 43 Acoustics
ISO/FDIS 16283-1
* Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation
2013-12-04
(Revision of ISO 140-4:1998, ISO 140-5:1998, ISO 140-7:1998, ISO 140-14:2004)
TC 44 Welding and allied processes
ISO/FDIS 5826 * Resistance welding equipment — Transformers — General specifications applicable to all transformers
2013-12-25
(Revision of ISO 5826:1999)
ISO/FDIS 5817 * Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
2013-12-04
(Revision of ISO 5817:2003, ISO 5817:2003/Cor 1:2006)
TC 45 Rubber and rubber products
ISO/FDIS 2929 * Rubber hoses and hose as-semblies for bulk fuel delivery by truck — Specification
2013-12-12
(Revision of ISO 2929:2002)
ISO/FDIS 10282
* Single-use sterile rubber surgical gloves — Specification
2013-12-08
(Revision of ISO 10282:2002, ISO 10282:2002/Cor 1:2005)
ISO/FDIS 14285
* Rubber and plastics gloves for food services — Limits for extractable substances
TC 61 Plastics
ISO/FDIS 15850
* Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach
2013-12-03
(Revision of ISO 15850:2002, ISO 15850:2002/DAmd 1)
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/FDIS 13085
* Petroleum and natural gas indus-tries — Aluminium alloy pipe for use as tubing for wells
2013-12-04
ISO/FDIS 27627
* Petroleum and natural gas indus-tries — Aluminium alloy drill pipe thread connection gauging
2013-12-04
TC 89 Wood-based panels
ISO/FDIS 13608
* Decorative veneered plywood
2013-12-19
ISO/FDIS 13609
* Blockboards and battenboards
2013-12-05
TC 96 Cranes
ISO/FDIS 10245-2
* Cranes — Limiting and indicating devices — Part 2: Mobile cranes
2013-12-12
(Revision of ISO 10245-2:1994)
TC 150 Implants for surgery
ISO 21536:2007/FDAmd 1
* Non-active surgical implants — Joint replacement implants — Specific requirements for knee-joint replacement implants — Amendment 1
2013-12-04
TC 163 Thermal performance and energy use in the built environment
ISO/FDIS 14857
* Thermal performance in the built environment — Determination of air permeance of building materials
TC 172 Optics and photonics
ISO/FDIS 8600-4
* Endoscopes — Medical endo-scopes and certain accessories — Part 4: Determination of maxi-mum width of insertion portion
2013-12-22
(Revision of ISO 8600-4:1997)
TC 173 Assistive products for per-sons with disability
ISO/FDIS 12505-1
* Skin barrier for ostomy aids — Test methods — Part 1: Size, surface pH and water-absorbency
2013-12-05
TC 176 Quality management and quality assurance
ISO/FDIS 18091
* Quality management systems — Guidelines for the applica-tion of ISO 9001:2008 in local government
2013-12-26
(Revision of IWA 4:2009)
TC 184 Automation systems and integration
ISO/FDIS 13482
* Robots and robotic devices — Safety requirements for personal care robots
2013-12-04
TC 190 Soil quality
ISO/FDIS 11267
* Soil quality — Inhibition of repro-duction of Collembola (Folsomia candida) by soil contaminants
2013-12-11
(Revision of ISO 11267:1999)
TC 202 Microbeam analysis
ISO/FDIS 17470
* Microbeam analysis — Electron probe microanalysis — Guide-lines for qualitative point analysis by wavelength dispersive X-ray spectrometry
2013-12-05
(Revision of ISO 17470:2004)
TC 210 Quality management and corresponding general as-pects for medical devices
IEC 62366:2007/FDAmd 1
* Medical devices — Application of usability engineering to medi-cal devices — Amendment 1
TC 215 Health informatics
10 ISO Update, Supplement to ISO Focus -- November 2013
ISO/FDIS 18104
* Health informatics — Categorial structures for representation of nursing diagnoses and nursing actions in terminological systems
2013-12-04
(Revision of ISO 18104:2003)
ISO/FDIS 20302
* Health informatics — Health cards — Numbering system and registration procedure for issuer identifiers
2013-12-11
(Revision of ISO 20302:2006)
TC 249 Traditional chinese medicine
ISO/FDIS 17218
* Sterile acupuncture needles for single use
2013-12-25
JTC 1 Information technology
ISO/IEC FDIS 19508
* Information technology — Object Management Group — Meta Object Facility (MOF) Core
2013-12-03
ISO/IEC FDIS 19509
* Information technology — Object Management Group XML Meta-data Interchange (XMI)
2013-12-03
ISO/IEC FDIS 29182-3
* Information technology — Sen-sor networks: Sensor Network Reference Architecture (SNRA) — Part 3: Reference architecture views
2013-12-12
ISO/IEC FDIS 25063
Systems and software engineer-ing — Systems and software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for usability: Context of use description
2013-12-16
ISO/IEC 10373-6:2011/FDAmd 5
* Identification cards — Test methods — Part 6: Proximity cards — Amendment 5: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC
2013-12-03
ISO/IEC 24727-3:2008/FDAmd 1
* Identification cards — Inte-grated circuit card programming interfaces — Part 3: Application interface — Amendment 1: .
ISO/IEC 24727-4:2008/FDAmd 1
* Identification cards — Inte-grated circuit card programming interfaces — Part 4: Application programming interface (API) ad-ministration — Amendment 1: .
ISO/IEC FDIS 27036-1
* Information technology — Se-curity techniques — Information security for supplier relation-ships — Part 1: Overview and concepts
2013-12-03
ISO/IEC FDIS 27038
* Information technology — Secu-rity techniques — Specification for digital redaction
ISO/IEC FDIS 29147
* Information technology — Secu-rity techniques — Vulnerability disclosure
2013-12-03
Standards published
New International Standards published between 01 October and 31 October 2013
* Available in English only
** French version of standard previously published in English only
Price
group
TC 1 Screw threads
ISO 16239:2013
Metric series wires for measuring screw threads
C
TC 6 Paper, board and pulps
ISO 5636-3:2013
* Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
G
ISO 5636-4:2013
* Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method
G
ISO 5636-5:2013
* Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method
F
ISO 8791-2:2013
Paper and board — Determination of roughness/smoothness (air leak meth-ods) — Part 2: Bendtsen method
H
TC 20 Aircraft and space vehicles
ISO 16290:2013
* Space systems — Definition of the Technology Readiness Levels (TRLs) and their criteria of assessment
F
ISO 16404:2013
* Space systems — Programme management — Requirements management
H
TC 22 Road vehicles
ISO 6622-2:2013
* Internal combustion engines — Piston rings — Part 2: Rectangular rings made of steel
L
ISO 6550-3:2013
* Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 3: M10 glow-plugs
E
ISO 28741:2013
* Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions
N
ISO 11898-6:2013
* Road vehicles — Controller area network (CAN) — Part 6: High-speed medium access unit with selective wake-up functionality
G
ISO Update, Supplement to ISO Focus -- November 2013 11
ISO 14229-5:2013
* Road vehicles — Unified diagnostic services (UDS) — Part 5: Unified di-agnostic services on Internet Protocol implementation (UDSonIP)
H
ISO 13052:2013
* Road vehicles — Trailers up to 3,5 t — Requirements for jockey wheels and drawbar supports
C
TC 23 Tractors and machinery for agri-culture and forestry
ISO 12934:2013
* Tractors and machinery for agri-culture and forestry — Basic types — Vocabulary
D
ISO 9912-2:2013
* Agricultural irrigation equipment — Filters for microirrigation — Part 2: Strainer-type filters and disc filters
E
TC 27 Solid mineral fuels
ISO 334:2013 * Solid mineral fuels — Determination of total sulfur — Eschka method
D
TC 29 Small tools
ISO 7388-3:2013
Tool shanks with 7/24 taper for auto-matic tool changers — Part 3: Reten-tion knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
E
ISO/TS 13399-301:2013
* Cutting tool data representation and exchange — Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
M
ISO/TS 13399-302:2013
* Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on proper-ties according to ISO/TS 13399-3: Modelling of solid drills and counter-sinking tools
T
ISO 10649-2:2013
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
C
ISO 10649-3:2013
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
C
ISO 10649-4:2013
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
C
TC 34 Food products
ISO 11816-1:2013
Milk and milk products — Determina-tion of alkaline phosphatase activity — Part 1: Fluorimetric method for milk and milk-based drinks
G
ISO/TS 17919:2013
Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — Detection of botulinum type A, B, E and F neurotoxin-producing clostridia
T
ISO 5985:2002 Animal feeding stuffs — Determination of ash insoluble in hydrochloric acid
D
ISO 13495:2013
Foodstuffs — Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid
G
TC 42 Photography
ISO 18939:2013
* Imaging materials — Digital hard copy for medical imaging — Methods of measuring permanence
N
TC 44 Welding and allied processes
ISO 10225:2013
Gas welding equipment — Marking for equipment used for gas welding, cut-ting and allied processes
A
TC 46 Information and documentation
ISO 27729:2012/Cor 1:2013
Information and documentation — International standard name identifier (ISNI) — Technical Corrigendum 1
free
TC 54 Essential oils
ISO 9841:2013 Essential oil of hyssop (Hyssopus of-ficinalis L. ssp. officinalis)
D
TC 58 Gas cylinders
ISO 3807:2013 Gas cylinders — Acetylene cylinders — Basic requirements and type testing
N
ISO 12209:2013
Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air
J
ISO/TR 16115:2013
* Gas cylinders — Classification of im-perfections arising during the manufac-ture of seamless steel and aluminium alloy gas cylinders
L
TC 61 Plastics
ISO 10123:2013
* Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
D
TC 69 Applications of statistical methods
ISO 22514-2:2013
* Statistical methods in process man-agement — Capability and perfor-mance — Part 2: Process capability and performance of time-dependent process models
L
TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection
ISO/ASTM 51939:2013
* Practice for blood irradiation dosimetry
G
ISO 21483:2013
Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U, Pu) O2
C
TC 86 Refrigeration and air-conditioning
ISO 16358-1:2013/Cor 1:2013
* Air-cooled air conditioners and air-to-air heat pumps — Testing and calculat-ing methods for seasonal performance factors — Part 1: Cooling seasonal performance factor — Technical Cor-rigendum 1
free
12 ISO Update, Supplement to ISO Focus -- November 2013
ISO 16358-2:2013/Cor 1:2013
* Air-cooled air conditioners and air-to-air heat pumps — Testing and calculat-ing methods for seasonal performance factors — Part 2: Heating seasonal performance factor — Technical Cor-rigendum 1
free
TC 92 Fire safety
ISO 12468-1:2013
* External exposure of roofs to fire — Part 1: Test method
M
ISO 12468-2:2013
* External exposure of roofs to fire — Part 2: Classification of roofs
C
TC 94 Personal safety -- Protective clothing and equipment
ISO 17249:2013
Safety footwear with resistance to chain saw cutting
J
ISO 16900-11:2013
Respiratory protective devices — Methods of test and test equipment — Part 11: Determination of field of vision
F
ISO/TS 16976-5:2013
* Respiratory protective devices — Hu-man factors — Part 5: Thermal effects
H
TC 110 Industrial trucks
ISO 22915-13:2012/Cor 1:2013
* Industrial trucks — Verification of sta-bility — Part 13: Rough-terrain trucks with mast — Technical Corrigendum 1
free
TC 123 Plain bearings
ISO 7902-1:2013
* Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure
P
TC 131 Fluid power systems
ISO 1179-1:2013
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
C
ISO 1179-2:2013
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
E
TC 135 Non-destructive testing
ISO 10878:2013
* Non-destructive testing — Infrared thermography — Vocabulary
N
TC 146 Air quality
ISO 25597:2013
Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cy-clone samplers and sample dilution
V
ISO 13137:2013
Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods
P
TC 147 Water quality
ISO 13163:2013
Water quality — Lead-210 — Test method using liquid scintillation counting
J
ISO 14189:2013
* Water quality — Enumeration of Clostridium perfringens — Method us-ing membrane filtration
F
ISO 16191:2013
Water quality — Determination of the toxic effect of sediment on the growth behaviour of Myriophyllum aquaticum
L
TC 150 Implants for surgery
ISO 16087:2013
* Implants for surgery — Roentgen stereophotogrammetric analysis for the assessment of migration of orthopae-dic implants
F
TC 164 Mechanical testing of metals
ISO 7802:2013 Metallic materials — Wire — Wrapping test
A
TC 172 Optics and photonics
ISO 8038:2013 * Microscopes — Screw threads for objectives and related nosepieces
C
TC 173 Assistive products for persons with disability
ISO 17049:2013
Accessible design — Application of braille on signage, equipment and appliances
D
TC 189 Ceramic tile
ISO 10545-9:2013
Ceramic tiles — Part 9: Determination of resistance to thermal shock
B
ISO 13007-2:2013
* Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives
M
TC 190 Soil quality
ISO/TS 17073:2013
* Soil quality — Determination of trace elements in aqua regia and nitric acid digests — Graphite furnace atomic ab-sorption spectrometry method (GFAAS)
E
TC 193 Natural gas
ISO 13734:2013
Natural gas — Organic components used as odorants — Requirements and test methods
E
TC 204 Intelligent transport systems
ISO/TR 14806:2013
Intelligent transport systems — Public transport requirements for the use of payment applications for fare media
P
ISO/TS 17444-2:2013
* Electronic fee collection — Charging performance — Part 2: Examination Framework
X
ISO/TS 17931:2013
* Intelligent transport systems — Exten-sion of map database specifications for Local Dynamic Map for applications of Cooperative ITS
XA
ISO Update, Supplement to ISO Focus -- November 2013 13
ISO/TS 18234-1:2013
* Intelligent transport systems — Traf-fic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 1: Introduction, numbering and versions (TPEG1-INV)
C
ISO/TS 18234-2:2013
* Intelligent transport systems — Traf-fic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 2: Syntax, semantics and framing struc-ture (TPEG1-SSF)
Q
ISO/TS 18234-7:2013
* Intelligent transport systems — Traf-fic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 7: Parking information (TPEG1-PKI)
X
ISO/TS 18234-9:2013
* Intelligent transport systems — Traf-fic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 9: Traffic event compact (TPEG1-TEC)
X
ISO/TS 18234-10:2013
* Intelligent transport systems — Traf-fic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 10: Conditional access information (TPEG1-CAI)
T
TC 206 Fine ceramics
ISO 14604:2012
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of fracture strain
F
ISO 14605:2013
Fine ceramics (advanced ceramics, advanced technical ceramics) — Light source for testing semiconducting pho-tocatalytic materials used under indoor lighting environment
D
TC 207 Environmental management
ISO/TS 14067:2013
Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification and communication
U
TC 213 Dimensional and geometrical product specifications and verification
ISO/TS 8062-2:2013
* Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules
U
TC 218 Timber
ISO 8965:2013 * Logging industry — Technology — Terms and definitions
A
TC 229 Nanotechnologies
ISO/TS 80004-6:2013
* Nanotechnologies — Vocabulary — Part 6: Nano-object characterization
M
TC 262 Risk management
ISO/TR 31004:2013
* Risk management — Guidance for the implementation of ISO 31000
R
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 17489:2013
Leather — Chemical tests — Deter-mination of tan content in synthetic tanning agents
C
JTC 1 Information technology
ISO/IEC TR 29181-4:2013
* Information technology — Future Network — Problem statement and requirements — Part 4: Mobility
L
ISO/IEC 15026-1:2013
* Systems and software engineering — Systems and software assurance — Part 1: Concepts and vocabulary
M
ISO/IEC TR 20000-5:2013
* Information technology — Service management — Part 5: Exemplar im-plementation plan for ISO/IEC 20000-1
S
ISO/IEC TR 20000-10:2013
* Information technology — Service management — Part 10: Concepts and terminology
K
ISO/IEC 29155-2:2013
* Systems and software engineering — Information technology project per-formance benchmarking framework — Part 2: Requirements for benchmarking
M
ISO/IEC TR 90006:2013
* Information technology — Guidelines for the application of ISO 9001:2008 to IT service management and its integra-tion with ISO/IEC 20000-1:2011
W
ISO/IEC 14443-4:2008/Amd 3:2013
* Identification cards — Contactless integrated circuit cards — Proximity cards — Part 4: Transmission protocol — Amendment 3: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC
XZ
ISO/IEC 29121:2013
* Information technology — Digitally recorded media for information inter-change and storage — Data migration method for DVD-R, DVD-RW, DVD-RAM, +R, and +RW disks
L
ISO/IEC 14776-333:2013
* Information technology — Small Computer System Interface (SCSI) — Part 333: SCSI Stream Commands - 3 (SSC-3)
XC
ISO/IEC 29101:2013
* Information technology — Security techniques — Privacy architecture framework
T
ISO/IEC 30111:2013
* Information technology — Security techniques — Vulnerability handling processes
F
ISO/IEC 11160-2:2013
* Information technology — Office equipment — Minimum information to be included in specification sheets — Printers — Part 2: Class 3 and Class 4 printers
J
ISO/IEC TR 20943-5:2013
* Information technology — Procedures for achieving metadata registry content consistency — Part 5: Metadata map-ping procedure
G
ISO/IEC TR 20943-6:2013
* Information technology — Procedures for achieving metadata registry content consistency — Part 6: Framework for generating ontologies
G
ISO/IEC 13250-3:2013
* Information technology — Topic Maps — Part 3: XML syntax
M
14 ISO Update, Supplement to ISO Focus -- November 2013
Standards confirmed
The following International Standards are confimred for a five year period:
TC 6 Paper, board and pulps
ISO 2144:1997 (reconfirmed)
ISO 4046-1:2002 (reconfirmed)
ISO 4046-2:2002 (reconfirmed)
ISO 4046-3:2002 (reconfirmed)
ISO 4046-4:2002 (reconfirmed)
ISO 4046-5:2002 (reconfirmed)
ISO 6587:1992 (reconfirmed)
ISO 187:1990 (reconfirmed)
ISO 8226-2:1990 (reconfirmed)
ISO 9932:1990 (reconfirmed)
ISO 13821:2002 (reconfirmed)
ISO 22414:2004 (reconfirmed)
TC 20 Aircraft and space vehicles
ISO 10096:1997 (reconfirmed)
ISO 11:1987 (reconfirmed)
ISO 45:1990 (reconfirmed)
ISO 1023:1974 (reconfirmed)
ISO 2964:1985 (reconfirmed)
ISO 3323:1987 (reconfirmed)
ISO 5887:1981 (reconfirmed)
ISO 7314:2002 (reconfirmed)
ISO 7319:1992 (reconfirmed)
ISO 7320:1992 (reconfirmed)
ISO 9538:1996 (reconfirmed)
ISO 12333:2000 (reconfirmed)
ISO 12334:2000 (reconfirmed)
ISO 16031-2:2003 (reconfirmed)
TC 22 Road vehicles
ISO 22241-3:2008
TC 23 Tractors and machinery for agriculture and forestry
ISO 6814:2009
ISO 8082-1:2009
ISO 8084:2003 (reconfirmed)
ISO 11169:1993 (reconfirmed)
ISO 7293:1997 (reconfirmed)
ISO 8893:1997 (reconfirmed)
ISO 10726:1992 (reconfirmed)
TC 27 Solid mineral fuels
ISO 616:1995 (reconfirmed)
TC 31 Tyres, rims and valves
ISO 3739-2:1992 (reconfirmed)
TC 34 Food products
ISO 658:2002 (reconfirmed)
ISO 729:1988 (reconfirmed)
ISO 735:1977 (reconfirmed)
ISO 749:1977 (reconfirmed)
ISO 771:1977 (reconfirmed)
ISO 5507:2002 (reconfirmed)
ISO 5511:1992 (reconfirmed)
ISO 8892:1987 (reconfirmed)
ISO 9167-1:1992 (reconfirmed)
ISO 4174:1998 (reconfirmed)
ISO 8981:1993 (reconfirmed)
ISO 11050:1993 (reconfirmed)
ISO 14864:1998 (reconfirmed)
TC 36 Cinematography
ISO 1223:2003 (reconfirmed)
ISO 1793:2005 (reconfirmed)
TC 38 Textiles
ISO 4880:1997 (reconfirmed)
ISO 105-A04:1989 (reconfirmed)
ISO 105-A05:1996 (reconfirmed)
ISO 105-C09:2001 (reconfirmed)
ISO 9866-1:1991 (reconfirmed)
ISO 9866-2:1991 (reconfirmed)
ISO 920:1976 (reconfirmed)
ISO 2646:1974 (reconfirmed)
ISO 2916:1975 (reconfirmed)
ISO 3073:1975 (reconfirmed)
TC 42 Photography
ISO 3772:2000 (reconfirmed)
ISO 5655:2000 (reconfirmed)
ISO 9378:1993 (reconfirmed)
ISO 10348:1993 (reconfirmed)
ISO 18922:2003 (reconfirmed)
ISO 18935:2005 (reconfirmed)
TC 47 Chemistry
ISO 910:1977 (reconfirmed)
ISO 2197:1972 (reconfirmed)
ISO 2199:1972 (reconfirmed)
ISO 2460:1973
ISO 2461:1973
ISO 2462:1973
ISO 2463:1973 (reconfirmed)
ISO 2466:1973
ISO 2992:1974
ISO 2993:1974
ISO 3199:1975 (reconfirmed)
ISO 3332:1975
ISO 3423:1975
ISO 3425:1975 (reconfirmed)
ISO 3426:1975 (reconfirmed)
ISO 3427:1976 (reconfirmed)
ISO 3704:1976 (reconfirmed)
ISO 3705:1976 (reconfirmed)
ISO 6796:1981 (reconfirmed)
ISO 7103:1982 (reconfirmed)
ISO 7105:1985
ISO 7106:1985
ISO Update, Supplement to ISO Focus -- November 2013 15
ISO 7108:1985
ISO 7109:1985
TC 58 Gas cylinders
ISO 407:2004 (reconfirmed)
TC 61 Plastics
ISO 14853:2005 (reconfirmed)
ISO 17422:2002 (reconfirmed)
ISO 20965:2005 (reconfirmed)
ISO 845:2006
ISO 1663:2007
TC 68 Financial services
ISO 11568-4:2007
ISO 19092:2008
TC 69 Applications of statistical methods
ISO 13448-1:2005 (reconfirmed)
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 6527:1982 (reconfirmed)
ISO 7385:1983 (reconfirmed)
ISO 8107:1993 (reconfirmed)
ISO 10979:1994 (reconfirmed)
TC 119 Powder metallurgy
ISO 4491-2:1997 (reconfirmed)
ISO 4491-3:1997 (reconfirmed)
TC 127 Earth-moving machinery
ISO 6683:2005 (reconfirmed)
ISO 10968:2004 (reconfirmed)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 161-2:1996 (reconfirmed)
ISO 11922-2:1997 (reconfirmed)
ISO 8283-4:1992 (reconfirmed)
ISO 4433-1:1997 (reconfirmed)
ISO 4433-2:1997 (reconfirmed)
ISO 4433-3:1997 (reconfirmed)
ISO 4433-4:1997 (reconfirmed)
ISO 580:2005 (reconfirmed)
ISO 9854-2:1994 (reconfirmed)
ISO 15908:2002 (reconfirmed)
ISO 9393-1:2004 (reconfirmed)
TC 159 Ergonomics
ISO 10075-3:2004 (reconfirmed)
ISO 14738:2002 (reconfirmed)
ISO 15537:2004 (reconfirmed)
TC 160 Glass in building
ISO/TS 29584:2012
TC 172 Optics and photonics
ISO 10110-11:1996
(reconfirmed)
ISO 10109-4:2001 (reconfirmed)
ISO 14132-5:2008
ISO 21094:2008
ISO 15253:2000 (reconfirmed)
ISO 16034:2002 (reconfirmed)
TC 173 Assistive products for persons with disability
ISO 7176-7:1998 (reconfirmed)
ISO 7176-15:1996 (reconfirmed)
ISO 16840-1:2006
TC 174 Jewellery
ISO 10713:1992 (reconfirmed)
ISO/TR 11211:1995
ISO 11596:2008
TC 180 Solar energy
ISO 9553:1997 (reconfirmed)
ISO 9808:1990 (reconfirmed)
TC 184 Automation systems and integration
ISO/TS 10303-35:2003
ISO 10303-109:2004
(reconfirmed)
ISO 10303-204:2002
(reconfirmed)
ISO 10303-218:2004
(reconfirmed)
ISO 15926-1:2004 (reconfirmed)
ISO 18629-1:2004 (reconfirmed)
ISO/TS 18876-1:2003
ISO/TS 18876-2:2003
TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
ISO 24510:2007
ISO 24511:2007
ISO 24512:2007
TC 226 Materials for the production of primary aluminium
ISO 806:2004 (reconfirmed)
ISO 6257:2002 (reconfirmed)
ISO 10236:1995 (reconfirmed)
ISO 12989-1:2000 (reconfirmed)
ISO 14422:1999 (reconfirmed)
TC 228 Tourism and related services
ISO 24803:2007
JTC 1 Information technology
ISO/TR 9547:1988
ISO/IEC TR 10034:1990
ISO/IEC TR 10176:2003
ISO/IEC TR 10182:1993
ISO/IEC 10967-3:2006
ISO/IEC TR 11017:1998
ISO/IEC 13568:2002
(reconfirmed)
ISO/IEC 13816:2007
16 ISO Update, Supplement to ISO Focus -- November 2013
ISO/IEC TR 14369:1999
ISO/IEC 15145:1997
(reconfirmed)
ISO 4232-1:1979 (reconfirmed)
Standards withdrawn
Period from 01 October to 31 October 2013
TC 34 Food products
ISO 4052:1983 (replaced by )
TC 38 Textiles
ISO/TR 14510:1997
(replaced by )
TC 44 Welding and allied processes
ISO 17655:2003 (replaced by )
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 12184:1994 (replaced by ISO 21483:2013)
TC 213 Dimensional and geometrical product specifications and verification
ISO/TR 5460:1985 (replaced by )
JTC 1 Information technology
ISO/IEC TR 15026-1:2010
(replaced by ISO/IEC 15026-1:2013)
Meeting calendar
(update at 01 October 2013)
Meetings called for the month of September are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
October-November 2013
28-1 Bali (Indonesia) TC 45 Rubber and rubber products
28-1 Cambridge, Massachusetts (USA)
TC 121/SC 2 Anaesthetic and res-piratory equipment/Airways and related equipment
28-2 Berlin (Germany) TC 130 Graphic technology
November 2013
1 Bali (Indonesia) TC 45/SC 3 Rubber and rubber products/Raw materi-als (including latex) for use in the rubber industry
2-9 Porto (Portugal) TC 176/SC 1 Quality management and quality assur-ance/Concepts and terminology
3-8 Gyeongju (Ko-rea, Republic of)
TC 184/SC 4 Automation systems and integration/Indus-trial data
4 Berlin (Germany) TC 41/SC 3 Pulleys and belts (including veebelts)/Conveyor belts
4-8 Sydney (Australia)
TC 34/SC 17 Food products/Man-agement systems for food safety
4-8 Porto (Portugal) TC 176/SC 2 Quality management and quality assur-ance/Quality systems
4-8 Porto (Portugal) TC 176/SC 3 Quality management and quality assur-ance/Supporting technologies
4-8 Bangkok (Thailand)
TC 217 Cosmetics
4-9 Perros-Guirec (France)
JTC 1 Information technology
4-9 Porto (Portugal) TC 176 Quality management and quality assurance
5 Berlin (Germany) TC 41/SC 4 Pulleys and belts (including veebelts)/Synchronous belt drives
6 Berlin (Germany) TC 41/SC 1 Pulleys and belts (including veebelts)/Friction
6-8 Paris (France) TC 275 Sludge recovery, recycling, treatment and disposal
7 Vienna (Austria) TC 83/SC 4 Sports and other rec-reational facilities and equipment/Snows-ports equipment
7 Okinawa (Japan) TC 201/SC 1 Surface chemical analysis/Terminology
7 Okinawa (Japan) TC 201/SC 2 Surface chemical analysis/General procedures
7 Okinawa (Japan) TC 201/SC 9 Surface chemical analysis/Scanning probe microscopy
7-9 Okinawa (Japan) TC 201 Surface chemical analysis
8 Delft (Netherlands)
TC 92/SC 1 Fire safety/Fire initia-tion and growth
8 Shenzen (China) TC 160 Glass in building
8 Shenzen (China) TC 160/SC 1 Glass in build-ing/Product considerations
8 Shenzen (China) TC 160/SC 2 Glass in building/Use considerations
8 Okinawa (Japan) TC 201/SC 3 Surface chemi-cal analysis/Data management and treatment
8 Okinawa (Japan) TC 201/SC 4 Surface chemi-cal analysis/Depth profiling
8 Okinawa (Japan) TC 201/SC 7 Surface chemical analysis/Electron spectroscopies
ISO Update, Supplement to ISO Focus -- November 2013 17
8 Washington, D.C (USA)
TC 227 Springs
9 Okinawa (Japan) TC 201/SC 8 Surface chemical analysis/Glow dis-charge spectroscopy
11 Mexico City (Mexico)
TC 113/SC 1 Hydrometry/Velocity area methods
11-15 Mexico City (Mexico)
TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices
11-15 Tokyo (Japan) TC 98 Bases for design of structures
11-15 Mexico City (Mexico)
TC 113 Hydrometry
12-13 Guangzhou (China)
TC 137 Footwear sizing des-ignations and marking systems
13 Tokyo (Japan) TC 110/SC 1 Industrial trucks/Gen-eral terminology
13 Mexico City (Mexico)
TC 113/SC 2 Hydrometry/Flow measurement structures
14 Tokyo (Japan) TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks
14 Mexico City (Mexico)
TC 113/SC 5 Hydrometry/In-struments, equip-ment and data management
14 Mexico City (Mexico)
TC 113/SC 6 Hydrometry/Sediment transport
14-15 Redlands (USA) TC 211 Geographic in-formation/Geomatics
15 Tokyo (Japan) TC 110 Industrial trucks
15 Mexico City (Mexico)
TC 113/SC 8 Hydrometry/Ground water
15 Belo Horizonte (Brazil)
TC 229 Nanotechnologies
18 Berlin (Germany) TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems
18 Mumbai (India) TC 135/SC 8 Non-destructive test-ing/Infrared thermog-raphy for non-de-structive testing
18-20 Berlin (Germany) TC 20 Aircraft and space vehicles
18-21 Exton (USA) TC 84 Devices for adminis-tration of medicinal products and intra-vascular catheters
19-20 Tokyo (Japan) * TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres
19-21 Singapore (Singapore)
TC 212 Clinical laboratory testing and in vitro di-agnostic test systems
20-22 Tokyo (Japan) * TC 269 Railway applications
27 Milan (Italy) TC 221 Geosynthetics
30 Miami (USA) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
December 2013
4-5 Clearwater (USA) TC 83/SC 5 Sports and other recreational facilities and equipment/Ice hockey equipment and facilities
4-5 La Plaine St-Denis (France)
* TC 279 Innovation process: interaction, tools and methods
5 Brussels (Belgium)
TC 94/SC 3 Personal safety -- Protective clothing and equipment/Foot protection
5-6 Paris (France) * TC 197 Hydrogen technologies
9-11 Montreux (Switzerland)
PC 284 Management system for quality of private security company (PSC) operations - Requirements with guidance
10 St. Hubert, Que-bec (Canada)
TC 20/SC 13 Aircraft and space vehicles/Space data and information trans-fer systems
11 Berlin (Germany) TC 35/SC 12 Paints and varnishes/Preparation of steel substrates before ap-plication of paints and related products
11 Frankfurt (Germany)
TC 270 Plastics and rubber machines
11-12 Kyoto (Japan) TC 281 Fine Bubble Technology
12-13 New York (USA) TC 171/SC 2 Document manage-ment applications/Application issues
12-13 Berlin (Germany) * TC 276 Biotechnology
16-20 Winterthur (Switzerland)
TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment
January 2014
12-17 Cape Town (South Africa)
TC 223 Societal security
13-16 New Delhi (India) * TC 69/SC 4 Applications of statis-tical methods/Appli-cations of statistical methods in process management
15-16 Geneva (Switzerland)
CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
23 Paris (France) TC 17/SC 3 Steel/Steels for struc-tural purposes
23-24 Tokyo (Japan) TC 282 Water re-use
28-31 Sydney (Australia)
* TC 71 Concrete, reinforced concrete and pre-stressed concrete
30-31 Berlin (Germany) TC 12 Quantities and units
February 2014
3-5 St. Peters-burg (Russian Federation)
TC 172/SC 4 Optics and photonics/Telescopic systems
10-11 Paris (France) * TC 44/SC 3 Welding and allied processes/Welding consumables
10-14 Paris (France) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
18 ISO Update, Supplement to ISO Focus -- November 2013
10-14 Nairobi (Kenya) * TC 285 Clean cookstoves and clean cooking solutions
12 Milan (Italy) TC 120/SC 3 Leather/Leather products
12-14 Milan (Italy) TC 120 Leather
13 Milan (Italy) TC 120/SC 1 Leather/Raw hides and skins, including pickled pelts
14 Milan (Italy) TC 120/SC 2 Leather/Tanned leather
19 Geneva (Switzerland)
President's committee
President's committee
19-20 London (United Kingdom)
* PC 286 Collaborative business relation-ship management -- Framework
20-21 Milan (Italy) PC 280 Management Consultancy
21 Berlin (Germany) TC 170 Surgical instruments
21 Stockholm (Sweden)
* TC 213 Dimensional and geometrical product specifications and verification
25-28 Foz do Iguacu (Brazil)
PC 277 Sustainable purchasing
26-27 Guilin (China) * TMB Technical Manage-ment Board
26-28 Kuala Lumpur (Malaysia)
* PC 273 Customer contact centres
(South America) ** JTC 1/SC 35 Information technol-ogy/User interfaces
March 2014
6 Virtual (Unknown)
* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
10-14 (Brazil) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
11-14 London (United Kingdom)
TC 118 Compressors and pneumatic tools, ma-chines and equipment
11-14 London (United Kingdom)
* TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines
11-14 London (United Kingdom)
* TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems
13 London (United Kingdom)
* TC 118/SC 1 Compressors and pneumatic tools, machines and equipment/Process compressors
13 London (United Kingdom)
* TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air treatment technology
17 Geneva (Switzerland)
* President's committee
President's committee
17-19 Geneva (Switzerland)
* COUNCIL Council
23-27 Warsaw (Poland) * TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
24-27 Warsaw (Poland) TC 107 Metallic and other inorganic coatings
25 Warsaw (Poland) * TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
25 Warsaw (Poland) * TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
25 Warsaw (Poland) * TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings
(Europe) ** TC 134 Fertilizers and soil conditioners
Paris (France) ** TC 274 Light and lighting
March-April 2014
31-4 (Australia) ** TC 198 Sterilization of health care products
1st Quarter 2014
(India) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems
(Netherlands) ** TC 257 General technical rules for determina-tion of energy savings in renovation projects, industrial enterprises and regions
April 2014
1 Toronto (Canada) TC 117 Fans
7-10 Vitoria (Brazil) TC 102 Iron ore and direct reduced iron
7-11 Delft (Netherlands)
* TC 6 Paper, board and pulps
7-11 Delft (Netherlands)
* TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board
7-11 Lund (Sweden) * TC 92 Fire safety
7-11 Bologna (Italy) * TC 110/SC 4 Industrial trucks/Rough-terrain trucks
7-11 Amsterdam (Netherlands)
* TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
8-9 (Japan) ** TC 199 Safety of machinery
8-10 (Brazil) ** TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
8-10 Vitoria (Brazil) * TC 102/SC 1 Iron ore and direct re-duced iron/Sampling
8-10 Vitoria (Brazil) * TC 102/SC 2 Iron ore and direct reduced iron/Chemi-cal analysis
ISO Update, Supplement to ISO Focus -- November 2013 19
8-10 Vitoria (Brazil) * TC 102/SC 3 Iron ore and direct reduced iron/Physical testing
9-11 Jeju (Korea, Republic of)
* TC 112 Vacuum technology
14-15 Hong Kong (Hong Kong, China)
* JTC 1/SC 27 Information tech-nology/IT Security techniques
23-24 (Europe) ** TC 167 Steel and aluminium structures
24-25 Bangkok (Thailand)
** TC 34 Food products
Berlin (Germany) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals
Berlin (Germany) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils
Tianjin (China) ** TC 219 Floor coverings
May 2014
5-9 Washington, D.C (USA)
* TC 46 Information and documentation
5-9 Washington, D.C (USA)
* TC 46/SC 9 Information and documentation/Identification and description
5-9 Washington, D.C (USA)
* TC 46/SC 11 Information and doc-umentation/Archives/records management
5-10 St. Petersburg, Florida (USA)
* TC 96 Cranes
8 Santa María de Lamas (Portugal)
** TC 87 Cork
8 Wiesbaden (Germany)
* TC 226 Materials for the production of primary aluminium
9-16 London (United Kingdom)
* TC 10 Technical product documentation
9-16 London (United Kingdom)
* TC 10/SC 1 Technical product documentation/Basic conventions
9-16 London (United Kingdom)
* TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation
12-16 Milan (Italy) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
12-16 London (United Kingdom)
TC 68/SC 4 Financial services/Securities and related financial instruments
12-16 Zhangjiajie (China)
** TC 195 Building construc-tion machinery and equipment
12-16 Zhangjiajie (China)
** TC 195/SC 1 Building construc-tion machinery and equipment/Machinery and equipment for concrete work
14-15 Geneva (Switzerland)
* COPOLCO Committee on con-sumer policy
14-16 Rosslyn (USA) ** TC 145 Graphical symbols
14-16 Rosslyn (USA) ** TC 145/SC 1 Graphical symbols/Public information symbols
14-16 Rosslyn (USA) ** TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, sym-bols and colours
14-16 Rosslyn (USA) ** TC 145/SC 3 Graphical symbols/Graphical symbols for use on equipment
15 London (United Kingdom)
TC 68 Financial services
15 West Consho-hocken (Phila-delphia) (USA)
* TC 119/SC 2 Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals)
15-20 Berlin (Germany) * TC 34/SC 5 Food products/Milk and milk products
16 West Consho-hocken (Phila-delphia) (USA)
* TC 119 Powder metallurgy
19-23 Milan (Italy) * TC 23/SC 13 Tractors and machin-ery for agriculture and forestry/Powered lawn and garden equipment
19-23 Berlin (Germany) ** TC 43 Acoustics
19-23 Berlin (Germany) ** TC 43/SC 1 Acoustics/Noise
19-23 Berlin (Germany) ** TC 43/SC 2 Acoustics/Building acoustics
19-23 Karuizawa (Japan)
TC 215 Health informatics
20-21 Prague (Czech Republic)
* TC 122 Packaging
21-22 (USA) ** TC 22/SC 3 Road vehicles/Elec-trical and electronic equipment
23 Toronto (Canada) * TC 268 Sustainable develop-ment in communities
23-24 Beijing (China) ** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
26-29 Kyoto (Japan) * TC 249 Traditional chinese medicine
26-30 Tokyo (Japan) ** TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations
26-30 Treviso (Italy) * TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings
26-30 Panama (Panama)
* TC 207 Environmental management
27-30 (USA) ** TC 156 Corrosion of metals and alloys
June 2014
1-6 (Sweden) ** TC 127 Earth-moving machinery
2-3 Geneva (Switzerland)
* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
2-5 Delft (Netherlands)
* TC 43/SC 3 Acoustics/Underwa-ter acoustics
2-6 Moscow (Rus-sian Federation)
* TC 85 Nuclear energy, nuclear technolo-gies, and radiological protection
20 ISO Update, Supplement to ISO Focus -- November 2013
2-6 Berlin (Germany) TC 211 Geographic in-formation/Geomatics
3 Moscow (Rus-sian Federation)
* TC 85/SC 2 Nuclear energy, nuclear technologies, and radiological pro-tection/Radiological protection
4-5 Geneva (Switzerland)
* TMB Technical Manage-ment Board
16-20 Incheon (Korea, Republic of)
* TC 121 Anaesthetic and res-piratory equipment
16-20 Baltimore (USA) * TC 188 Small craft
17-18 Stockholm (Sweden)
* TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers
17-18 Berlin (Germany) * TC 220 Cryogenic vessels
23-27 Washington, D.C (USA)
** TC 34/SC 9 Food products/Microbiology
23-27 London (United Kingdom)
* TC 193 Natural gas
25-26 Paris (France) * TC 91 Surface active agents
Düsseldorf (Germany)
** TC 17/SC 17 Steel/Steel wire rod and wire products
London (United Kingdom)
** TC 193/SC 1 Natural gas/Analysis of natural gas
July 2014
1 Geneva (Switzerland)
President's committee
President's committee
7-11 Vienna (Austria) ** PC 271 Compliance manage-ment systems
8-11 Boulder (USA) * REMCO Committee on refer-ence materials
September 2014
2-4 Research Trian-gle Park (USA)
* TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis
3-5 Berlin (Germany) ** TC 202 Microbeam analysis
3-5 Berlin (Germany) ** TC 202/SC 1 Microbeam analysis/Terminology
3-5 Berlin (Germany) ** TC 202/SC 2 Microbeam analy-sis/Electron probe microanalysis
3-5 Berlin (Germany) ** TC 202/SC 3 Microbeam analysis/Analytical electron microscopy
3-5 Berlin (Germany) ** TC 202/SC 4 Microbeam analysis/Scanning electron microscopy (SEM)
7 Rio de Janeiro (Brazil)
* President's committee
President's committee
8-9 Rio de Janeiro (Brazil)
* DEVCO Committee on devel-oping country matters
8-9 Madrid (Spain) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
8-9 Rio de Janeiro (Brazil)
* TMB Technical Manage-ment Board
8-12 Paris (France) ** TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems
9-19 Paris (France) * TC 213 Dimensional and geometrical product specifications and verification
10 Rio de Janeiro (Brazil)
* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
10-12 Rio de Janeiro (Brazil)
* GA General Assembly
13 Rio de Janeiro (Brazil)
* COUNCIL Council
15-19 Seoul (Korea, Republic of)
** TC 150 Implants for surgery
15-19 Wuxi (China) * TC 163 Thermal performance and energy use in the built environment
15-19 Wuxi (China) * TC 205 Building environment design
17-18 Bangkok (Thailand)
* TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries
18-19 Manches-ter (United Kingdom)
** TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
21 Amsterdam (Netherlands)
* TC 254 Safety of amusement rides and amusement devices
22-26 Honolulu, Hawaii (USA)
** TC 61/SC 10 Plastics/Cellular plastics
22-26 Durban (South Africa)
** TC 146 Air quality
22-26 Durban (South Africa)
** TC 146/SC 1 Air quality/Stationary source emissions
22-26 Durban (South Africa)
** TC 146/SC 6 Air quality/Indoor air
24-25 Geneva (Switzerland)
* CASCO Committee on con-formity assessment
25 Chicago (USA) * TC 79/SC 11 Light metals and their alloys/Titanium
Stockholm (Sweden)
** TC 17/SC 11 Steel/Steel castings
Sydney (Australia)
** TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder
Milan (Italy) ** TC 39/SC 4 Machine tools/Wood-working machines
Seattle (USA) ** TC 89 Wood-based panels
3rd Quarter 2014
London (United Kingdom)
** TC 48 Laboratory equipment
2nd-3rd Quarter 2014
Ljimuden (Netherlands)
** TC 17/SC 9 Steel/Tinplate and blackplate
October 2014
5-10 Berlin (Germany) TC 215 Health informatics
14-16 Suzhou (China) * TC 164/SC 5 Mechanical testing of metals/Fatigue testing
ISO Update, Supplement to ISO Focus -- November 2013 21
15 Suzhou (China) * TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
15-16 Suzhou (China) * TC 164/SC 2 Mechanical testing of metals/Ductility testing
16 Suzhou (China) * TC 164/SC 3 Mechanical testing of metals/Hardness testing
16-17 (Czech Republic) ** TC 58/SC 2 Gas cylinders/Cylin-der fittings
17 Suzhou (China) * TC 164/SC 1 Mechanical testing of metals/Uniaxial testing
20-24 Nunspeet (Netherlands)
TC 149/SC 1 Cycles/Cycles and major sub-assemblies
20-24 Berlin (Germany) * TC 190 Soil quality
20-24 Berlin (Germany) * TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification
20-24 Berlin (Germany) * TC 190/SC 2 Soil quality/Sampling
20-24 Berlin (Germany) * TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics
20-24 Berlin (Germany) * TC 190/SC 4 Soil quality/Biological methods
20-24 Berlin (Germany) * TC 190/SC 5 Soil quality/Physical methods
20-24 Berlin (Germany) * TC 190/SC 7 Soil quality/Soil and site assessment
22-23 Tokyo (Japan) * TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium
23-24 (South Africa) ** TC 178 Lifts, escalators and moving walks
27-31 Berlin (Germany) * TC 264 Fireworks
29 (Europe) ** TC 79 Light metals and their alloys
Miami (USA) ** TC 44/SC 3 Welding and allied processes/Welding consumables
Toronto (Canada) ** TC 59 Buildings and civil engineering works
(Canada) ** TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in build-ing construction
Toronto (Canada) ** TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works
Tokyo (Japan) ** TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
Prague (Czech Republic)
** TC 135 Non-destructive testing
Paris (France) ** TC 218 Timber
November 2014
3-7 Cape Town (South Africa)
** TC 45 Rubber and rubber products
4th Quarter 2014
(Portugal) ** TC 34/SC 4 Food products/Cere-als and pulses
2nd Semester 2014
Madrid (Spain) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments
Month unknown 2014
(Australia) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition
(Brazil) ** TC 28 Petroleum products and lubricants
Beijing (China) ** TC 36 Cinematography
(Germany) ** TC 37 Terminology and other language and content resources
(Japan) ** TC 44 Welding and allied processes
Nairobi (Kenya) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids
Seoul (Korea, Republic of)
** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies
(United Kingdom)
** TC 142 Cleaning equipment for air and other gases
February 2015
3-13 London (United Kingdom)
* TC 213 Dimensional and geometrical product specifications and verification
St. Petersburg, Florida (USA)
** TC 115 Pumps
March 2015
17-18 Geneva (Switzerland)
* COUNCIL Council
1st Quarter 2015
Foshan (China) ** TC 107 Metallic and other inorganic coatings
Foshan (China) ** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
Foshan (China) ** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings
April 2015
24 Atlanta (USA) ** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board
25 Atlanta (USA) ** TC 6 Paper, board and pulps
(France) ** TC 29 Small tools
22 ISO Update, Supplement to ISO Focus -- November 2013
(France) ** TC 29/SC 9 Small tools/Tools with cutting edges made of hard cutting materials
(USA) ** TC 34/SC 15 Food products/Coffee
Tienjin (China) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
(Europe) ** TC 215 Health informatics
May 2015
18-22 London (United Kingdom)
** TC 4 Rolling bearings
June 2015
22-26 Göteborg (Sweden)
* TC 188 Small craft
Beijing (China) ** TC 46 Information and documentation
2nd Quarter 2015
(China) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
September 2015
14-25 Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification
16-18 Seoul (Korea, Republic of)
* GA General Assembly
19 Seoul (Korea, Republic of)
* COUNCIL Council
Vienna (Austria) ** TC 33 Refractories
3rd Quarter 2015
Sao Paulo (Brazil)
** TC 215 Health informatics
2nd-3rd Quarter 2015
(Europe) ** TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests
October 2015
Nairobi (Kenya) ** TC 38 Textiles
Nairobi (Kenya) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
Nairobi (Kenya) ** TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
Nairobi (Kenya) ** TC 38/SC 23 Textiles/Fibres and yarns
Nairobi (Kenya) ** TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics
Sao Paulo (Brazil)
** TC 58/SC 2 Gas cylinders/Cylin-der fittings
November 2015
(China) ** JTC 1 Information technology
2nd Semester 2015
(Europe) ** TC 126/SC 2 Tobacco and to-bacco products/Leaf tobacco
Month unknown 2015
(South Africa) ** REMCO Committee on refer-ence materials
(Switzerland) ** TC 17/SC 17 Steel/Steel wire rod and wire products
(USA) ** TC 27 Solid mineral fuels
(Finland) ** TC 44 Welding and allied processes
(France) ** TC 45 Rubber and rubber products
(Russian Federation)
** TC 96 Cranes
Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids
(Japan) ** TC 142 Cleaning equipment for air and other gases
(China) ** TC 155 Nickel and nickel alloys
(United Kingdom)
** TC 164 Mechanical testing of metals
(Austria) ** TC 190 Soil quality
(China) ** TC 274 Light and lighting
February 2016
(USA) ** TC 213 Dimensional and geometrical product specifications and verification
April 2016
Seoul (Korea, Republic of)
** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
(Australia) ** TC 178 Lifts, escalators and moving walks
November 2016
(Norway) ** JTC 1 Information technology
Month unknown 2016
(Russian Federation)
** REMCO Committee on refer-ence materials
(Australia) ** TC 44 Welding and allied processes
(China) ** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies