ISO list 1

ISO 1:2002 Geometrical Product Specifications (GPS) Standard reference

temperature for geometrical product specification and verification

ISO 2:1973 Textiles Designation of the direction of twist in yarns and related

products

ISO 3:1973 Preferred numbers Series of preferred numbers

ISO 4:1997 Information and documentation Rules for the abbreviation of title words

and titles of publications

ISO 5 Photography and graphic technology Density measurements

ISO 5-1:2009 Geometry and functional notation

ISO 5-2:2009 Geometric conditions for transmittance density

ISO 5-3:2009 Spectral conditions

ISO 5-4:2009 Geometric conditions for reflection density

ISO 6:1993 Photography Black-and-white pictorial still camera negative film/process

systems Determination of ISO speed

ISO 7 Pipe threads where pressure-tight joints are made on the threads

ISO 7-1:1994 Dimensions, tolerances and designation

ISO 7-2:2000 Verification by means of limit gauges

ISO 8:1977 Documentation Presentation of periodicals

ISO 9:1995 Information and documentation Transliteration of Cyrillic characters into

Latin characters Slavic and non-Slavic languages

ISO 11:1987 Aircraft Ground pressure testing connections for pressure cabins

ISO 12:1987 Aerospace Pipelines Identification

ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering

Dimensions, tolerances and verification

ISO 15:2011 Radial bearings -- Boundary dimensions, general plan

ISO 16:1975 Acoustics Standard tuning frequency (Standard musical pitch)

ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers

ISO 18:1981 Documentation Contents list of periodicals

ISO 21:1985 Shipbuilding Inland navigation Cable-lifters for stud-link anchor

chains

ISO 22:1991 Belt drives Flat transmission belts and corresponding pulleys

Dimensions and tolerances

ISO 23:1993 Cinematography -- Camera usage of 35 mm motion-picture film --

Specifications

ISO 25:1994 Cinematography -- Camera usage of 16 mm motion-picture film --

Specifications

ISO 26:1993 Cinematography -- Projector usage of 16 mm motion-picture films for

direct front projection -- Specifications

ISO 28:1976 Cinematography -- Camera usage of 8 mm Type R motion-picture film --

Specifications

ISO 29:1980 Cinematography -- Projector usage of 8 mm Type R silent motion-picture

film for direct front projection -- Specifications [Withdrawn without replacement]

ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000]

ISO 32:1977 Gas cylinders for medical use -- Marking for identification of content

ISO 34

ISO 34-1:2010 Rubber, vulcanized or thermoplastic -- Determination of tear strength -

- Part 1: Trouser, angle and crescent test pieces

ISO 34-2:2011 Rubber, vulcanized or thermoplastic -- Determination of tear strength -

- Part 2: Small (Delft) test pieces

ISO 35:2004 Natural rubber latex concentrate -- Determination of mechanical stability

ISO 36:2011 Rubber, vulcanized or thermoplastic -- Determination of adhesion to

textile fabrics

ISO 37:2011 Rubber, vulcanized or thermoplastic Determination of tensile stress-

strain properties

ISO 41:1980 Shipbuilding -- Inland vessels -- Covers for deck openings for pumps

[withdrawn without replacement]

ISO 43:1976 Aircraft -- Jacking pads

ISO 44:1975 Aerospace -- Lever-operated, two-position, ON/OFF switches -- Directions

of operation

ISO 45:1990 Aircraft -- Pressure refuelling connections

ISO 46:1973 Aircraft -- Fuel nozzle grounding plugs and sockets

ISO 48:2010 Rubber, vulcanized or thermoplastic -- Determination of hardness

(hardness between 10 IRHD and 100 IRHD)

ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1

ISO 50:1977 Metal pipes -- Steel sockets screwed according to ISO 7 [Withdrawn

without replacement]

ISO 53:1998 Cylindrical gears for general and heavy engineering -- Standard basic

rack tooth profile

ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering --

Modules

ISO 55:1977 Seedlac -- Specification [Withdrawn without replacement]

ISO 57:1975 Bleached lac -- Specification [Withdrawn without replacement]

ISO 60:1977 Plastics -- Determination of apparent density of material that can be

poured from a specified funnel

ISO 61:1976 Plastics -- Determination of apparent density of moulding material that

cannot be poured from a specified funnel

ISO 62:2008 Plastics -- Determination of water absorption

ISO 63:1975 Flat transmission belts -- Lengths [Withdrawn: Replaced with ISO 22]

ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1

ISO 67:1981 Muscovite mica blocks, thins and films -- Grading by size [Withdrawn

without replacement]

ISO 68 ISO general-purpose screw threads Basic profile

ISO 68-1:1998 Metric screw threads

ISO 68-2:1998 Inch screw threads

ISO 69:1998 Cinematography -- 16 mm motion-picture and magnetic film -- Cutting

and perforating dimensions

ISO 70:1981 Cinematography -- 35 mm negative photographic sound record on 35 mm

motion-picture film -- Position and maximum width dimensions

ISO 71:1977 Cinematography -- 16 mm negative photographic sound record on 16

mm, 35/16 mm and 35/32 mm motion-picture film -- Positions and dimensions

ISO 74:1976 Cinematography -- Image area produced by camera aperture and

maximum projectable image area on 8 mm Type R motion-picture film -- Positions and

dimensions

ISO 75 Plastics -- Determination of temperature of deflection under load

ISO 75-1:2013 Plastics -- Determination of temperature of deflection under load -- Part

1: General test method


2: Plastics and ebonite


3: High-strength thermosetting laminates and long-fibre-reinforced plastics

ISO 76:2006 Rolling bearings -- Static load ratings

ISO 78 Chemistry Layouts for standards

ISO 78-2:1999 Chemistry -- Layouts for standards -- Part 2: Methods of chemical

analysis

ISO 78-3:1983 Chemistry -- Layouts for standards -- Part 3: Standard for molecular

absorption spectrometry

ISO 78-4:1983 Layouts for standards -- Part 4: Standard for atomic absorption

spectrometric analysis

ISO 82:1974 Steel -- Tensile testing [Withdrawn: replaced with ISO 6892-1]

ISO 83:1976 Steel -- Charpy impact test (U-notch) [Withdrawn: replaced with ISO

148-1]

ISO 86:1974 Steel -- Tensile testing of sheet and strip less than 3 mm and not less

than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1]

ISO 89:1974 Steel -- Tensile testing of wire [Withdrawn: replaced with ISO 6892-1]

ISO 90 Light gauge metal containers -- Definitions and determination of dimensions

and capacities

ISO 90-1:1997 Light gauge metal containers -- Definitions and determination of

dimensions and capacities -- Part 1: Open-top cans


dimensions and capacities -- Part 2: General use containers


dimensions and capacities -- Part 3: Aerosol cans

ISO 91 Petroleum measurement tables

ISO 91-1:1992 Petroleum measurement tables -- Part 1: Tables based on reference

temperatures of 15 degrees C and 60 degrees F

ISO 91-2:1991 Petroleum measurement tables -- Part 2: Tables based on a reference

temperature of 20 degrees C

ISO 92:1976 Textile machinery and accessories -- Spinning machinery -- Definition of

side (left or right)

ISO 93 Textile machinery and accessories -- Cylindrical sliver cans

ISO 93-1:2006 Textile machinery and accessories -- Cylindrical sliver cans -- Part 1:

Main dimensions

ISO 93-2:2006 Textile machinery and accessories -- Cylindrical sliver cans -- Part 2:

Spring bottoms

ISO 94:1982 Textile machinery and accessories -- Spindle gauges for ring-spinning and

ring-doubling frames

ISO 96 Textile machinery and accessories -- Rings and travellers for ring spinning and

ring twisting frames

ISO 96-1:2009 Textile machinery and accessories -- Rings and travellers for ring

spinning and ring twisting frames -- Part 1: Flange rings T and SF and their travellers

ISO 96-2:2009 Textile machinery and accessories -- Rings and travellers for ring

spinning and ring twisting frames -- Part 2: HZ- and J-rings and their travellers

ISO 97:1975 Textile machinery and accessories -- Rings for spinning, doubling and

twisting for ear-shaped travellers

ISO 98:2001 Textile machinery and accessories -- Spinning preparatory and spinning

machinery -- Main dimensions of coverings for top rollers

ISO 100:1984 Pulleys for flat transmission belts -- Crowns [Withdrawn: replaced with

ISO 22]

ISO 102:1990 Aircraft -- Gravity filling orifices

ISO 104:2002 Rolling bearings -- Thrust bearings -- Boundary dimensions, general

plan

ISO 105 Textiles Tests for colour fastness

ISO 105-A01:2010 Part A01: General principles of testing

ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour

ISO 105-A03:1993 Part A03: Grey scale for assessing staining

ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of

staining of adjacent fabrics

ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for

determination of grey scale rating

ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of

colour

ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement

ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital

imaging techniques

ISO 105-B01:1994 Part B01: Colour fastness to light: Daylight

ISO 105-B02:2013 Part B02: Colour fastness to artificial light: Xenon arc fading lamp

test

ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure

ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading

lamp test

ISO 105-B05:1993 Part B05: Detection and assessment of photochromism

ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high

temperatures: Xenon arc fading lamp test

ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial

perspiration

ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7

ISO 105-B10:2011 Part B10: Artificial weathering -- Exposure to filtered xenon-arc

radiation

ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering

ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed

textiles

ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering

using a non-phosphate reference detergent incorporating a low-temperature bleach

activator

ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering --

Oxidative bleach response using a non-phosphate reference detergent incorporating a

low temperature bleach activator

ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda

ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering

ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene

solvent

ISO 105-D02:1993 Part D02: Colour fastness to rubbing: Organic solvents

ISO 105-E01:2013 Part E01: Colour fastness to water

ISO 105-E02:2013 Part E02: Colour fastness to sea water

ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool

water)

ISO 105-E04:2013 Part E04: Colour fastness to perspiration

ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid

ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali

ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water

ISO 105-E08:1994 Part E08: Colour fastness to hot water

ISO 105-E09:2010 Part E09: Colour fastness to potting

ISO 105-E10:1994 Part E10: Colour fastness to decatizing

ISO 105-E11:1994 Part E11: Colour fastness to steaming

ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling

ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe

ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild

ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics

ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric

ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics

ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric

ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric

ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric

ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric

ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric

ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth

ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre

ISO 105-G01:1993 Part G01: Colour fastness to nitrogen oxides

ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes

ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere

ISO 105-G04:1989 Part G04: Colour fastness to oxides of nitrogen in the atmosphere

at high humidities

ISO 105-J01:1997 Part J01: General principles for measurement of surface colour

ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness

ISO 105-J03:2009 Part J03: Calculation of colour differences

ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour

inconstancy of a specimen with change in illuminant (CMCCON02)

ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite

ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide

ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)

ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)

ISO 105-N05:1993 Part N05: Colour fastness to stoving

ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)

ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating

ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air

ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride

ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam

ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride

ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid

ISO 105-X04:1994 Part X04: Colour fastness to mercerizing

ISO 105-X05:1994 Part X05: Colour fastness to organic solvents

ISO 105-X06:1994 Part X06: Colour fastness to soda boiling

ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool

ISO 105-X08:1994 Part X08: Colour fastness to degumming

ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde

ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl

chloride coatings

ISO 105-X11:1994 Part X11: Colour fastness to hot pressing

ISO 105-X12:2001 Part X12: Colour fastness to rubbing

ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical

means for creasing, pleating and setting

ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium

dichloroisocyanurate

ISO 105-X16:2001 Part X16: Colour fastness to rubbing -- Small areas

ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of

materials

ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium

salts

ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and

copper

ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres

ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes

ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes

ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration

ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution

stability of water-soluble dyes

ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of

reactive dyes in the presence of electrolytes

ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble

dyes

ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in

solution

ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions

ISO 108:1976 Textile machinery and accessories -- Weaving looms -- Definition of left

and right sides

ISO 109:1982 Textile machinery -- Working widths of weaving machines

ISO 110:1978 Textile machinery and accessories -- Cones for yarn winding (cross

wound) -- Half angle of the cone 9 degrees 15' [Withdrawn without replacement]


wound) -- Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]


wound) -- Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]

ISO 113:2010 Rolling bearings -- Plummer block housings -- Boundary dimensions

ISO 114:1980 99.8 Unalloyed magnesium ingots -- Chemical composition [Withdrawn:

Replaced by ISO 8287]

ISO 115:2003 Unalloyed aluminium ingots for remelting -- Classification and

composition

ISO 119:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free

phenols -- Iodometric method

ISO 120:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free

ammonia and ammonium compounds -- Colorimetric comparison method

ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings -- Chemical

composition and mechanical properties of sand cast reference test bars [Withdrawn:

replaced by ISO 16220]

ISO 123:2001 Rubber latex -- Sampling

ISO 124:2011 Latex, rubber -- Determination of total solids content

ISO 125:2011 Natural rubber latex concentrate -- Determination of alkalinity

ISO 126:2005 Natural rubber latex concentrate -- Determination of dry rubber content

ISO 127:2012 Rubber, natural latex concentrate -- Determination of KOH number

ISO 128

ISO 128-1:2003 Technical drawings -- General principles of presentation -- Part 1:

Introduction and index

ISO 128-15:2013 Technical product documentation (TPD) -- General principles of

presentation -- Part 15: Presentation of shipbuilding drawings


Basic conventions for lines


Preparation of lines by CAD systems


Basic conventions and applications for leader lines and reference lines


Lines on construction drawings


Lines on mechanical engineering drawings


Lines on shipbuilding drawings


Basic conventions for views


Views on mechanical engineering drawings


Basic conventions for cuts and sections


Sections on mechanical engineering drawings


Basic conventions for representing areas on cuts and sections

ISO/TS 128-71:2010 Technical product documentation (TPD) -- General principles of

presentation -- Part 71: Simplified representation for mechanical engineering drawings

ISO 129

ISO 129-1:2004 Technical drawings -- Indication of dimensions and tolerances -- Part

1: General principles

ISO 129-4:2013 Technical product documentation (TPD) -- Indication of dimensions

and tolerances -- Part 4: Dimensioning of shipbuilding drawings

ISO 131:1979 Acoustics -- Expression of physical and subjective magnitudes of sound

or noise in air [Withdrawn without replacement]

ISO 132:2011 Rubber, vulcanized or thermoplastic -- Determination of flex cracking

and crack growth (De Mattia)

ISO 133:1983 Rubber, vulcanized -- Determination of crack growth (De Mattia)

[Withdrawn: Replaced with ISO 132]

ISO 136:1972 Steel -- Simple torsion testing of wire [Withdrawn replaced by ISO

7800]

ISO 137:1975 Wool -- Determination of fibre diameter -- Projection microscope

method

ISO 139:2005 Textiles -- Standard atmospheres for conditioning and testing

ISO 140 Acoustics -- Measurement of sound insulation in buildings and of building

elements

ISO 140-2:1991 Part 2: Determination, verification and application of precision data

ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between

rooms

ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of faade

elements and faades

ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors

ISO 140-14:2004 Part 14: Guidelines for special situations in the field

ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on

building elements

ISO 141:1976 Textile machinery and accessories -- Pirn winders and cross winders --

Definition of left and right sides

ISO 142:1976 Textile machinery and accessories -- Weaving preparatory machines --

Definition of left and right sides

ISO 143:1977 Textile machinery and accessories -- Weft pirns for automatic looms

[Withdrawn without replacement]

ISO 144:1973 Steel -- Reverse bend testing of wire [Withdrawn: replaced with ISO

7801]

ISO 146:1984 Metallic materials -- Hardness test -- Verification of Vickers hardness

testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2]

ISO 146-2:1993 Metallic materials -- Verification of Vickers hardness testing machines

-- Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2]

ISO 148 Metallic materials -- Charpy pendulum impact test

ISO 148-1:2009 Part 1: Test method

ISO 148-2:2008 Part 2: Verification of testing machines

ISO 148-3:2008 Part 3: Preparation and characterization of Charpy V-notch test pieces

for indirect verification of pendulum impact machines

ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes --

Specifications and methods of test

ISO 155:1998 Belt drives -- Pulleys -- Limiting values for adjustment of centres

ISO 156:1982 Metallic materials -- Hardness test -- Verification of Brinell hardness

testing machines [Withdrawn replaced by ISO 6506-2]

ISO 157:1996 Coal -- Determination of forms of sulfur

ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without

replacement]

ISO 161 Thermoplastics pipes for the conveyance of fluids -- Nominal outside

diameters and nominal pressures

ISO 161-1:1996 Part 1: Metric series

ISO 161-2:1996 Part 2: Inch-based series

ISO 162:1985 Cinematography -- Head gaps and sound records for three-, four-, or

six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-

picture film containing no picture -- Positions and width dimensions

ISO 171:1980 Plastics -- Determination of bulk factor of moulding materials

ISO 172:1978 Plastics -- Phenol-formaldehyde mouldings -- Detection of free ammonia

ISO 174:1974 Plastics -- Homopolymer and copolymer resins of vinyl chloride --

Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-

2]

ISO 216:2007 Writing paper and certain classes of printed matter Trimmed sizes A

and B series, and indication of machine direction

ISO 226:2003 Acoustics Normal equal-loudness-level contours

ISO 228 Pipe threads where pressure-tight joints are not made on the threads

ISO 228-1:2000 Dimensions, tolerances and designation

ISO 228-2:1987 Verification by means of limit gauges

ISO 233 Information and documentation Transliteration of Arabic characters into

Latin characters[Note 3]

ISO 233-2:1993 Arabic language Simplified transliteration

ISO 233-3:1999 Persian language Simplified transliteration

ISO 259 Information and documentation Transliteration of Hebrew characters into

Latin characters[Note 3]

ISO 259-2:1994 Simplified transliteration

ISO 261 ISO general purpose metric screw threads General plan

ISO 262 ISO general purpose metric screw threads Selected sizes for screws, bolts

and nuts

ISO 286-1 Geometrical product specifications (GPS) ISO code system for tolerances

on linear sizes Part 1: Basis of tolerances, deviations and fits

ISO 286-2 Geometrical product specifications (GPS) ISO code system for tolerances

on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for

holes and shafts

ISO 361 Basic ionizing radiation symbol

ISO 500 Agricultural tractors Rear-mounted power take-off types 1, 2 and 3

ISO 518:2006 Photography Camera accessory shoes, with and without electrical

contacts, for photoflash lamps and electronic photoflash units Specification

ISO 519:1992 Photography Hand-held cameras Flash-connector dimensions

ISO 639 Codes for the representation of names of languages

ISO 639-1 Alpha-2 code

ISO 639-2 Alpha-3 code

ISO 639-3 Alpha-3 code for comprehensive coverage of languages

ISO 639-4 General principles of coding of the representation of names of languages

and related entities, and application guidelines

ISO 639-5 Alpha-3 code for language families and groups

ISO 639-6 Alpha-4 code for comprehensive coverage of language variants

ISO/IEC 646 Information technology ISO 7-bit coded character set for information

interchange

ISO 657 Hot-rolled steel sections

ISO 668 Series 1 freight containers Classification, dimensions and ratings

ISO 690 Information and documentation Guidelines for bibliographic references and

citations to information resources

ISO 704 Terminology work Principles and methods

ISO 732 Photography 120-size and 220-size films Dimensions

ISO 764 Horology Magnetic resistant watches

ISO 760:1978 Determination of water - Karl Fischer method (General method)

ISO 787 General methods of test for pigments and extenders

ISO 787-9:1981 Determination of pH value of an aqueous suspension

ISO 838 Paper Holes for general filing purposes Specifications

ISO 843:1997 Information and documentation Conversion of Greek characters into

Latin characters

ISO 860 Terminology work Harmonization of concepts and terms

ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel[Note

3]

ISO 898-1 Bolts, screws and studs with specified property classes Coarse thread and

fine pitch thread

ISO 898-2 Nuts with specified proof load values Coarse thread

ISO 898-5 Set screws and similar threaded fasteners not under tensile stresses

ISO 898-6 Nuts with specified proof load values Fine pitch thread

ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal

diameters 1 mm to 10 mm

ISO 965 ISO general purpose metric screw threads Tolerances

ISO 965-1 Principles and basic data

ISO 965-2 Limits of sizes for general purpose external and internal screw threads

Medium quality

ISO 965-3 Deviations for constructional screw threads

ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with

internal screw threads tapped with tolerance position H or G after galvanizing

ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized

external screw threads with maximum size of tolerance position h before galvanizing

ISO 999 Information and documentation Guidelines for the content, organization,

and presentation of indexes

ISO 1000 SI units and recommendations for the use of their multiples and of certain

other units [withdrawn 2009-11-17]

ISO 1004 Information processing Magnetic ink character recognition Print

specifications

ISO 1007 Photography 135-size film and magazine Specifications

ISO 1101 Geometrical Product Specifications (GPS) Geometrical tolerancing

Tolerances of form, orientation, location and run-out

ISO 1222 Photography Tripod connections

ISO 1268 Fibre-reinforced plastics Methods of producing test plates

ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing

ISO/IEC 1539 Information technology Programming languages Fortran

ISO 1629 Rubber and latices Nomenclature

ISO 1663 Rigid cellular plastics Determination of water vapour transmission

properties

ISO 1745 Information processing Basic mode control procedures for data

communication systems

ISO 1750 Pesticides and other agrochemicals Common names

ISO 1928 Solid mineral fuels Determination of gross calorific value by the bomb

calorimetric method and calculation of net calorific value

ISO/IEC 2022 Information technology Character code structure and extension

techniques

ISO 2108 Information and documentation International standard book number

(ISBN)

ISO 2145 Documentation Numbering of divisions and subdivisions in written

documents

ISO 2162 Technical product documentation Springs

ISO 2162-1 Simplified representation

ISO 2162-2 Presentation of data for cylindrical helical compression springs

ISO 2171 Cereals, pulses and by-products Determination of ash yield by incineration

ISO 2240:2003 Photography Colour reversal camera films Determination of ISO

speed

ISO 2533 Standard Atmosphere

ISO 2692 Geometrical product specifications (GPS) Geometrical tolerancing

Maximum material requirement (MMR), least material requirement (LMR) and

reciprocity requirement (RPR)

ISO 2709 Information and documentation Format for information exchange

ISO 2768 General tolerances

ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance

indications

ISO 2768-2 Geometrical tolerances for features without individual tolerance indications

ISO 2852 Stainless steel clamp pipe couplings for the food industry

ISO 3002 Basic quantities in cutting and grinding

ISO 3082 Iron ores Sampling and sample preparation procedures

ISO 3098 Technical product documentation Lettering

ISO 3103 Tea Preparation of liquor for use in sensory tests

ISO 3166 Codes for the representation of names of countries and their subdivisions

ISO 3166-1 Country codes

ISO 3166-2 Country subdivision code

ISO 3166-3 Code for formerly used names of countries

ISO 3297 Information and documentation International standard serial number

(ISSN)

ISO 3394 Dimensions of rigid rectangular packages Transport packages

ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners

ISO 3534 Statistics Vocabulary and symbols

ISO 3534-1 General statistical terms and terms used in probability

ISO 3534-2 Applied statistics

ISO 3534-3 Design of experiments

ISO 3534-4 Survey sampling

ISO 3536 Road vehicles Safety glazing materials Vocabulary

ISO 3537 Road vehicles Safety glazing materials Mechanical tests

ISO 3538 Road vehicles Safety glazing materials Test methods for optical

properties

ISO 3601 Fluid power systems O-rings

ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes

ISO 3601-2 Housing dimensions for general applications

ISO 3601-3 Quality acceptance criteria

ISO 3601-4 Anti-extrusion rings (back-up rings)

ISO 3601-5 Suitability of elastomeric materials for industrial applications

ISO 3602 Documentation Romanization of Japanese (kana script)

ISO 3632 Spices Saffron (Crocus sativus L.)[Note 3]

ISO 3635:1981 Size designation of clothes Definitions and body measurement

procedure

ISO 3676 Packaging Unit load sizes Dimensions

ISO 3864 Graphical symbols Safety colours and safety signs

ISO 3901 Information and documentation International Standard Recording Code

(ISRC)

ISO 3977 Gas turbines Procurement

ISO 4074 Natural latex rubber condoms Requirements and test methods

ISO 4157 Construction drawings Designation systems

ISO 4157-1 Buildings and part of buildings

ISO 4157-2 Room names and numbers

ISO 4157-3 Room identifiers

ISO 4165 Road vehicles Electrical connections Double-pole connection

ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines

Cement mortar lining

ISO 4217 Codes for the representation of currencies and funds

ISO 4314 Surface active agents Determination of free alkalinity or free acidity

Titrimetric method

ISO 4578 Adhesives Determination of peel resistance of high-strength adhesive

bonds Floating-roller method

ISO 4582 Plastics Determination of changes in colour and variations in properties

after exposure to daylight under glass, natural weathering or laboratory light sources

ISO 4587 Adhesives Determination of tensile lap-shear strength of rigid-to-rigid

bonded assemblies

ISO 4628 Paints and varnishes Evaluation of degradation of coatings Designation of

quantity and size of defects, and of intensity of uniform changes in appearance

ISO 4628-1 General introduction and designation system

ISO 4628-2 Assessment of degree of blistering

ISO 4628-3 Assessment of degree of rusting

ISO 4628-4 Assessment of degree of cracking

ISO 4628-5 Assessment of degree of flaking

ISO 4628-6 Assessment of degree of chalking by tape method

ISO 4628-7 Assessment of degree of chalking by velvet method

ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe

ISO 4628-10 Assessment of degree of filiform corrosion

ISO/IEC 4873:1991 Information technology ISO 8-bit code for information

interchange Structure and rules for implementation

ISO 4892 Plastics Methods of exposure to laboratory light sources

ISO 5127 Information and documentation Vocabulary

ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted

in circular cross-section conduits running full

ISO 5167-1 General principles and requirements

ISO 5167-2 Orifice plates

ISO 5167-3 Nozzles and Venturi nozzles

ISO 5167-4 Venturi tubes

ISO/IEC 5218 Information technology Codes for the representation of human sexes

ISO 5455 Technical drawings Scales

ISO 5457 Technical product documentation Sizes and layout of drawing sheets

ISO 5458 Geometrical Product Specifications (GPS) Geometrical tolerancing

Positional tolerancing

ISO 5459 Geometrical product specifications (GPS) Geometrical tolerancing Datums

and datum systems

ISO 5660 Reaction-to-fire tests Heat release, smoke production and mass loss rate

ISO 5660-1 Heat release rate (cone calorimeter method)

ISO 5660-2 Smoke production rate (dynamic measurement)

ISO/TS 5660-3 Guidance on measurement

ISO 5725 Accuracy (trueness and precision) of measurement methods and results

ISO 5775 Bicycle tires and rims

ISO 5776 Graphic technology - Symbols for text correction

ISO 5800:2001 Photography Colour negative films for still photography

Determination of ISO speed

ISO 5893 Rubber and plastics test equipment Tensile, flexural and compression types

(constant rate of traverse) Specification

ISO 5964 Documentation Guidelines for the establishment and development of

multilingual thesauri

ISO 5971:1981 Size designation of clothes Pantyhose

ISO 5993 Sodium hydroxide for industrial use -- Determination of mercury content --

Flameless atomic absorption spectrometric method

ISO 6107-4:1993 Water quality -- Vocabulary

ISO 6166 Securities and related financial instruments International securities

identification numbering system (ISIN)

ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements

ISO 6194-5 Identification of visual imperfections

ISO 6336 Calculation of load capacity of spur and helical gears

ISO 6344 Coated abrasives Grain size analysis

ISO 6344-1 Grain size distribution test

ISO 6344-2 Determination of grain size distribution of macrogrits P12 to P220

ISO 6344-3 Determination of grain size distribution of microgrits P240 to P2500

ISO 6357 Documentation Spine titles on books and other publications

ISO/IEC 6429 Information technology Control functions for coded character sets

ISO 6438 Documentation African coded character set for bibliographic information

interchange

ISO/IEC 6523 Information technology Structure for the identification of organizations

and organization parts

ISO 6579 Microbiology of food and animal feeding stuffs Horizontal method for the

detection of Salmonella spp.

ISO 6594 Cast iron drainage pipes and fittings Spigot series

ISO 6709 Standard representation of geographic point location by coordinates

ISO 6946 Building components and building elements Thermal resistance and

thermal transmittance Calculation method

ISO 7001 Graphical symbols Public information symbols

ISO 7002 Agricultural food products Layout for a standard method of sampling from

a lot

ISO 7098 Information and documentation Romanization of Chinese

ISO 7200 Technical product documentation Data fields in title blocks and document

headers

ISO 7240 Fire detection and alarm systems

ISO 7372 Trade data interchange

ISO/IEC 7498 Information technology -- Open Systems Interconnection -- Basic

Reference Model[Note 3]

ISO/IEC 7498-1 The Basic Model

ISO 7498-2 Security Architecture

ISO/IEC 7498-3 Naming and addressing

ISO/IEC 7498-4 Management framework

ISO/IEC 7501 Identification cards Machine readable travel documents

ISO/IEC 7501-1:2008 Machine readable passport

ISO/IEC 7501-2:1997 Machine readable visa

ISO/IEC 7501-3:2005 Machine readable official travel documents

ISO 7736 Road vehicles Car radio for front installation Installation space including

connections

ISO/IEC 7810 Identification cards Physical characteristics

ISO/IEC 7811 Identification cards Recording technique

ISO/IEC 7812 Identification cards Identification of issuers

ISO/IEC 7813 Information technology Identification cards Financial transaction

cards

ISO/IEC 7816 Identification cards Integrated circuit cards[Note 3]

ISO/IEC 7942 Information technology Computer graphics and image processing

Graphical Kernel System (GKS)

ISO 8000 Data quality

ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts,

principles and rules

ISO 8090 Cycles Terminology

ISO 8180 Ductile iron pipelines Polyethylene sleeving for site application

ISO 8373 Manipulating industrial robots Vocabulary

ISO 8501 Preparation of steel substrates before application of paints and related

products Visual assessment of surface cleanliness

ISO 8559:1989 Garment construction and anthropometric surveys Body dimensions

ISO 8573 Compressed air

ISO 8573-1 Contaminants and purity classes

ISO 8573-2 Test methods for oil aerosol content

ISO 8573-3 Test methods for measurement of humidity

ISO 8573-4 Test methods for solid particle content

ISO 8573-5 Test methods for oil vapour and organic solvent content

ISO 8573-6 Test methods for gaseous contaminant content

ISO 8573-7 Test method for viable microbiological contaminant content

ISO 8573-8 Test methods for solid particle content by mass concentration

ISO 8573-9 Test methods for liquid water content

ISO 8583 Financial transaction card originated messages Interchange message

specifications

ISO 8583-1 Messages, data elements and code values

ISO 8583-2 Application and registration procedures for Institution Identification Codes

(IIC)

ISO 8583-3 Maintenance procedures for messages, data elements and code values

ISO 8601 Data elements and interchange formats Information interchange

Representation of dates and times

ISO/IEC 8613 Information technology Open Document Architecture (ODA) and

interchange format

ISO/IEC 8632 Information technology Computer graphics Metafile for the storage

and transfer of picture description information

ISO/IEC 8632-1 Functional specification

ISO/IEC 8632-2 Character encoding

ISO/IEC 8632-3 Binary encoding [withdrawn 2001-06-21]

ISO/IEC 8632-4 Clear text encoding

ISO 8651 Information technology Computer graphics Graphical Kernel System

(GKS) language bindings[Note 3]

ISO/IEC 8652 Information technology Programming languages Ada

ISO 8653:1986 Jewellery Ring-sizes Definition, measurement and designation

ISO 8691 Petroleum products Low levels of vanadium in liquid fuels Determination

by flameless atomic absorption spectrometry after ashing

ISO 8805 Information processing systems Computer graphics Graphical Kernel

System for Three Dimensions (GKS-3D) functional description

ISO/IEEC 8806 Information technology Computer graphics Graphical Kernel

System for Three Dimensions (GKS-3D) language bindings

ISO/IEEC 8806-4 C

ISO 8807 Information processing systems Open Systems Interconnection LOTOS

A formal description technique based on the temporal ordering of observational

behaviour

ISO/IEC 8824 Information technology Abstract Syntax Notation One (ASN.1)

ISO/IEC 8825 Information technology ASN.1 encoding rules

ISO/IEC 8859 Information technology 8-bit single-byte coded graphic character sets

ISO/IEC 8859-1 Latin alphabet No. 1




ISO/IEC 8859-5 Latin/Cyrillic alphabet

ISO/IEC 8859-6 Latin/Arabic alphabet

ISO/IEC 8859-7 Latin/Greek alphabet

ISO/IEC 8859-8 Latin/Hebrew alphabet



ISO/IEC 8859-11 Latin/Thai alphabet


ISO/IEC 8859-14 Latin alphabet No. 8 (Celtic)



ISO 8879 Information processing Text and office systems Standard Generalized

Markup Language (SGML)

ISO 9000 Quality management systems Fundamentals and vocabulary

ISO 9001 Quality management systems Requirements

ISO 9004 Managing for the sustained success of an organization A quality

management approach

ISO 9050 Glass in building Determination of light transmittance, solar direct

transmittance, total solar energy transmittance, ultraviolet transmittance and related

glazing factors

ISO 9069 Information processing SGML support facilities SGML Document

Interchange Format (SDIF)

ISO/IEC 9075 Information technology Database languages SQL

ISO/IEC 9126 Software engineering Product quality

ISO 9141 Road vehicles Diagnostic systems[Note 3]

ISO 9141-2 CARB requirements for interchange of digital information

ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool

ISO 9241 Ergonomics of human-system interaction

ISO/IEC 9293 Information technology Volume and file structure of disk cartridges for

information interchange

ISO 9362 Banking Banking telecommunication messages Business identifier code

(BIC)

ISO 9407 Shoe sizes Mondopoint system of sizing and marking

ISO/IEC 9541 Information technology Font information interchange

ISO/IEC 9541-1:1991 Architecture

ISO/IEC 9541-2:1991 Interchange Format

ISO/IEC 9541-3:1994 Glyph shape representation

ISO/IEC 9541-4:2009 Harmonization to Open Font Format

ISO 9564 Financial services Personal Identification Number (PIN) management and

security[Note 3]

ISO/IEC 9579 Information technology Remote database access for SQL with security

enhancement


Programmer's Hierarchical Interactive Graphics System (PHIGS)

ISO/IEC 9593 Information technology Computer graphics Programmer's

Hierarchical Interactive Graphics System (PHIGS) language bindings[Note 3]

ISO/IEC 9594 Information technology Open Systems Interconnection The Directory

ISO/IEC 9636 Information technology - Computer graphics - Interfacing techniques for

dialogues with graphical devices (CGI) - Functional specification

ISO/IEC 9636-1 Overview, profiles, and conformance

ISO/IEC 9636-2 Control

ISO/IEC 9636-3 Output

ISO/IEC 9636-4 Segments

ISO/IEC 9636-5 Input and echoing

ISO/IEC 9636-6 Raster

ISO 9660 Information processing Volume and file structure of CD-ROM for


ISO 9712 Non-destructive testing - Qualification and certification of NDT personnel

ISO/IEC 9796 Information technology Security techniques Digital signature

schemes giving message recovery

ISO/IEC 9797 Information technology Security techniques Message Authentication

Codes (MACs)

ISO/IEC 9797-1 Mechanisms using a block cipher

ISO/IEC 9797-2 Mechanisms using a dedicated hash-function

ISO/IEC 9798 Information technology Security techniques Entity authentication

ISO/IEC 9834 Information technology Open Systems Interconnection Procedures

for the operation of OSI Registration Authorities

ISO 9869 Thermal insulation Building elements In-situ measurements of thermal

resistance and thermal transmittance

ISO/IEC 9899 Programming languages C

ISO/IEC/IEEE 9945 Information technology Portable Operating System Interface

(POSIX) Base Specifications, Issue 7

ISO 9984 Information and documentation Transliteration of Georgian characters into

Latin characters

ISO 9985 Information and documentation Transliteration of Armenian characters into

Latin characters

ISO 9992 Financial transaction cards Messages between the integrated circuit card

and the card accepting device

ISO/IEC 9995 Information technology Keyboard layouts for text and office systems

ISO 9999 Assistive products for persons with disability Classification and terminology

ISO 10001:2007 Quality management Customer satisfaction Guidelines for codes

of conduct for organizations

ISO 10002:2014 Quality management Customer satisfaction Guidelines for

complaints handling in organizations

ISO 10003:2007 Quality management Customer satisfaction Guidelines for dispute

resolution external to organizations

ISO 10004:2008 Quality management Customer satisfaction Guidelines for

monitoring and measuring

ISO 10005:2005 Quality management systems Guidelines for quality plans

ISO 10006:2003 Quality management systems Guidelines for quality management in

projects

ISO 10007:2003 Quality management systems Guidelines for configuration

management

ISO 10012:2003 Measurement management systems Requirements for

measurement processes and measuring equipment

ISO/TR 10013:2001 Guidelines for quality management system documentation

ISO 10014:2006 Quality management Guidelines for realizing financial and economic

benefits

ISO 10015:1999 Quality management Guidelines for training

ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000

ISO 10018:2012 Quality management Guidelines on people involvement and

competence

ISO 10019:2005 Guidelines for the selection of quality management system

consultants and use of their services

ISO/IEC 10021 Information technology Message Handling Systems (MHS)

ISO/IEC 10026 Information technology Open Systems Interconnection

ISO 10077 Thermal performance of windows, doors and shutters Calculation of

thermal transmittance

ISO/IEC 10089 Information technology 130 mm rewritable optical disk cartridge for


ISO/IEC 10116 Information technology Security techniques Modes of operation for

an n-bit block cipher

ISO/IEC 10118 Information technology Security techniques Hash-functions

ISO 10160 Information and documentation Open Systems Interconnection

Interlibrary Loan Application Service Definition

ISO 10161 Information and documentation Open Systems Interconnection

Interlibrary Loan Application Protocol Specification

ISO/IEC 10164 Information technology Open Systems Interconnection Systems

Management

ISO/IEC 10179:1996 Information technology Processing languages Document Style

Semantics and Specification Language (DSSSL)

ISO/IEC 10206 Information technology Programming languages Extended Pascal

ISO 10211 Thermal bridges in building construction Heat flows and surface

temperatures Detailed calculations

ISO 10218 Robots and robotic devices Safety requirements for industrial robots

ISO/IEC 10279 Information technology Programming languages Full BASIC

ISO 10303 Industrial automation systems and integration Product data

representation and exchange

ISO 10380 Pipework Corrugated metal hoses and hose assemblies

ISO 10383 Securities and related financial instruments Codes for exchanges and

market identification (MIC)

ISO 10487 Passenger cars Connections for car radios[Note 3]

ISO 10555 Sterile, single-use intravascular catheters

ISO 10579 Geometrical product specifications (GPS) Dimensioning and tolerancing

Non-rigid parts

ISO 10628 Flow diagrams for process plants

ISO/IEC 10646 Information technology Universal Coded Character Set (UCS)

ISO 10664 Hexalobular internal driving feature for bolts and screws Torx screw head

ISO/IEC 10746 Information technology - Open distributed processing

ISO/IEC 10746-1 Information technology - Open Distributed Processing - Reference

model: Overview

ISO/IEC 10746-2 Information technology - Open distributed processing - Reference

model: Foundations

ISO/IEC 10746-3 Information technology - Open distributed processing - Reference

model: Architecture

ISO/IEC 10746-4 Information technology - Open Distributed Processing - Reference

Model: Architectural semantics

ISO 10957 Information and documentation International standard music number

(ISMN)

ISO 10962 Securities and related financial instruments Classification of Financial

Instruments (CFI code)

ISO 10993 Biological evaluation of medical devices

ISO 10993-1 Evaluation and testing within a risk management process

ISO 10993-2 Animal welfare requirements

ISO 10993-3 Tests for genotoxicity, carcinogenicity and reproductive toxicity

ISO 10993-4 Selection of tests for interactions with blood

ISO 10993-5 Tests for in vitro cytotoxicity

ISO 10993-6 Tests for local effects after implantation

ISO 10993-7 Ethylene oxide sterilization residuals

ISO 10993-9 Framework for identification and quantification of potential degradation

products

ISO 10993-10 Tests for irritation and skin sensitization

ISO 10993-11 Tests for systemic toxicity

ISO 10993-12 Sample preparation and reference materials

ISO 10993-13 Identification and quantification of degradation products from polymeric

medical devices

ISO 10993-14 Identification and quantification of degradation products from ceramics

ISO 10993-15 Identification and quantification of degradation products from metals

and alloys

ISO 10993-16 Toxicokinetic study design for degradation products and leachables

ISO 10993-17 Establishment of allowable limits for leachable substances

ISO 10993-18 Chemical characterization of materials

ISO 10993-19 Physico-chemical, morphological and topographical characterization of

materials

ISO 10993-20 Principles and methods for immunotoxicology testing of medical devices

ISO 11064 Ergonomic design of control centres

ISO 11064-1:2000 Principles for the design of control centres

ISO 11064-2:2000 Principles for the arrangement of control suites

ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002

ISO 11064-4:2004 Layout and dimensions of workstations

ISO 11064-5:2008 Displays and controls

ISO 11064-6:2005 Environmental requirements for control centres

ISO 11064-7:2006 Principles for the evaluation of control centres

ISO 11120 Gas cylinders -- Refillable seamless steel tubes for compressed gas

transport, of water capacity between 150 l and 3000 l -- Design construction and

testing

ISO 11135:2014 Sterilization of health-care products -- Ethylene oxide --

Requirements for the development, validation and routine control of a sterilization

process for medical devices

ISO 11137 Sterilization of health care products Radiation

ISO 11170:2003 Hydraulic fluid power Filter elements Sequence of tests for

verifying performance characteristics

ISO 11171:2010 Hydraulic fluid power Calibration of automatic particle counters for

liquids

ISO/IEC 11172 Information technology Coding of moving pictures and associated

audio for digital storage media at up to about 1,5 Mbit/s

ISO/IEC 11179 Information technology Metadata registries (MDR)

ISO/IEC 11179-1:2004 Framework

ISO/IEC 11179-2:2005 Classification

ISO/IEC 11179-3:2003 Registry metamodel and basic attributes

ISO/IEC 11179-4:2004 Formulation of data definitions

ISO/IEC 11179-5:2005 Naming and identification principles

ISO/IEC 11179-6:2005 Registration

ISO 11357 Plastics Differential scanning calorimetry (DSC)

ISO 11357-1:2009 General principles

ISO 11357-2:2013 Determination of glass transition temperature and glass transition

step height

ISO 11357-3:2011 Determination of temperature and enthalpy of melting and

crystallization

ISO 11357-4:2005 Determination of specific heat capacity

ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and

times, enthalpy of reaction and degree of conversion

ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and

oxidation induction temperature (dynamic OIT)

ISO 11357-7:2002 Determination of crystallization kinetics

ISO/IEC 11404 Information technology General-Purpose Datatypes (GPD)

ISO 11446:2004 Road vehicles Connectors for the electrical connection of towing and

towed vehicles 13-pole connectors for vehicles with 12 V nominal supply voltage

ISO 11469:2000 Plastics Generic identification and marking of plastics products

ISO/IEC 11578:1996 Information technology Open Systems Interconnection

Remote procedure call (RPC)

ISO 11783 Tractors and machinery for agriculture and forestry Serial control and

communications data network

ISO/IEC 11801 Information technology Generic cabling for customer premises

ISO 11898 Road vehicles Controller area network (CAN)

ISO 12006 Building construction Organization of information about construction

works

ISO/IEC 12207 Systems and software engineering Software life cycle processes

ISO 12100 Safety of machinery General principles for design Risk assessment and

risk reduction

ISO 12639 Graphic technology Prepress digital data exchange Tag image file

format for image technology (TIFF/IT)

ISO 12641 Graphic technology Prepress digital data exchange Colour targets for

input scanner calibration

ISO/TS 12805:2011 Nanotechnologies Materials specifications Guidance on

specifying nano-objects

ISO 12859/TR Intelligent transport systems System architecture Privacy aspects in

ITS standards and systems

ISO 12944 Paints and varnishes Corrosion protection of steel structures by protective

paint systems

ISO 13007 Ceramic tiles Grouts and adhesives

ISO 13007-1:2014 Terms, definitions and specifications for adhesives

ISO 13007-2:2010 Test methods for adhesives

ISO 13007-3:2010 Terms, definitions and specifications for grouts

ISO 13007-4:2013 Test methods for grouts

ISO/TR 13121:2011 Nanotechnologies Nanomaterial risk evaluation

ISO 13239 Information technology Telecommunications and information exchange

between systems High-level data link control (HDLC) procedures

ISO/IEC 13249 Information technology Database languages SQL multimedia and

application

ISO/IEC 13250 Information technology Topic Maps[Note 3]

ISO 13320:2009 Particle size analysis - Laser diffraction methods

ISO/IEC 13346 Information technology Volume and file structure of write-once and

rewritable media using non-sequential recording for information interchange

ISO 13370 Thermal performance of buildings Heat transfer via the ground

Calculation methods

ISO 13406-2:2001 Ergonomic requirements for work with visual displays based on flat

panels Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-

14]

ISO 13450 Photography 110-size cartridge, film and backing paper Dimensions

ISO 13485:2003 Medical devices Quality management systems Requirements for

regulatory purposes

ISO/IEC 13490 Information technology Volume and file structure of read-only and

write-once compact disk media for information interchange

ISO 13567 Technical product documentation Organization and naming of layers for

CAD

ISO/IEC 13568:2002 Information Technology Z formal specification notation

Syntax, type system and semantics

ISO 13577 Industrial furnaces and associated processing equipment - Safety

ISO 13577-1 General requirements

ISO 13579 Industrial furnaces and associated processing equipment - Method of

measuring energy balance and calculating efficiency

ISO 13579-1 General methodology

ISO 13579-2 Reheating furnaces for steel

ISO 13579-3 Batch-type aluminium melting furnaces

ISO 13579-4 Furnaces with protective or reactive atmosphere

ISO 13586:2000 Plastics - Determination of fracture toughness (GIC and KIC) -- Linear

elastic fracture mechanics (LEFM) approach

ISO 13616 Financial services International bank account number (IBAN)

ISO 13628 Petroleum and natural gas industries Design and operation of subsea

production systems

ISO 13628-1 General requirements and recommendations

ISO 13628-2 Unbonded flexible pipe systems for subsea and marine applications

ISO 13628-3 Through flowline (TFL) systems

ISO 13628-4 Subsea wellhead and tree equipment

ISO 13628-5 Subsea umbilicals

ISO 13628-6 Subsea production control systems

ISO 13628-7 Completion/workover riser systems

ISO 13628-8 Remotely Operated Vehicle (ROV) interfaces on subsea production

systems

ISO 13628-9 Remotely Operated Tool (ROT) intervention systems

ISO 13628-10 Specification for bonded flexible pipe

ISO 13628-11 Flexible pipe systems for subsea and marine applications

ISO 13715 Technical drawingsEdges of undefined shapeVocabulary and indications

ISO 13849 Safety of machinery Safety related parts of control systems

ISO/IEC 13818 Information technology Generic coding of moving pictures and

associated audio information

ISO 13837 Road vehicles Safety glazing materials Method for the determination of

solar transmittance

ISO 14000 Environmental management systems [This is a set of standards, rather than

a single standard.]

ISO 14001:2004 Environmental management systems Requirements with guidance

for use

ISO 14004:2004 Environmental management systems General guidelines on

principles, systems and support techniques

ISO 14031 Environmental management - Environmental performance evaluation

Guidelines

ISO 14050 Environmental management Vocabulary

ISO 14051 Environmental management Material flow cost accounting - General

framework

ISO 14064 Greenhouse gases

ISO 14155:2011 Clinical investigation of medical devices for human subjects Good

clinical practice

ISO 14223 Radiofrequency [sic] identification of animals Advanced transponders

ISO 14224 Petroleum, petrochemical and natural gas industries - Collection and

exchange of reliability and maintenance data for equipment

ISO 14230 Road vehicles Diagnostic systems Keyword Protocol 2000

ISO 14230-1 Physical layer

ISO 14230-2 Data link layer

ISO 14230-3 Application layer

ISO 14230-4 Requirements for emission-related systems

ISO 14405-1 Geometrical product specifications (GPS) Dimensional tolerancing Part

1: Linear sizes

ISO/IEC 14443 Identification cards Contactless integrated circuit cards Proximity

cards

ISO/IEC 14462 - Open-EDI Reference Model

ISO/IEC 14496 Information technology Coding of audio-visual objects

ISO 14641 Electronic archiving

ISO 14641-1:2012 Specifications concerning the design and the operation of an

information system for electronic information preservation

ISO 14644 Cleanrooms and associated controlled environments

ISO 14644-1:1999 Classification of air cleanliness

ISO 14644-2:2000 Specifications for testing and monitoring to prove continued

compliance with ISO 14644-1

ISO 14644-3:2005 Test methods

ISO 14644-4:2001 Design, construction and start-up

ISO 14644-5:2004 Operations

ISO 14644-6:2007 Vocabulary

ISO 14644-7:2004 Separative devices (clean air hoods, gloveboxes, isolators and mini-

environments)

ISO 14644-8:2006 Classification of airborne molecular contamination

ISO/IEC 14651 Information technology International string ordering and comparison

Method for comparing character strings and description of the common template

tailorable ordering

ISO 14698 Cleanrooms and associated controlled environments Biocontamination

control

ISO 14698-1 General principles and methods

ISO 14698-2 Evaluation and interpretation of biocontamination data

ISO/IEC 14750 Information technology Open Distributed Processing Interface

Definition Language

ISO/IEC 14755 Information technology Input methods to enter characters from the

repertoire of ISO/IEC 10646 with a keyboard or other input device

ISO 14801 Dentistry Implants Dynamic fatigue test for endosseous dental implants

ISO 14855-1 Determination of the ultimate aerobic biodegradability of plastic materials

under controlled composting conditions Method by analysis of evolved carbon dioxide

ISO 14855-1:2005 General method

ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a

laboratory-scale test

ISO/IEC 14882 Programming Languages C++

ISO 14915 Software ergonomics for multimedia user interfaces

ISO 14915-1:2002 Design principles and framework

ISO 14915-2:2003 Multimedia navigation and control

ISO 14915-3:2002 Media selection and combination

ISO 14971:2007 Medical devices Application of risk management to medical devices

ISO/IEC 14977 Information technology Syntactic metalanguage Extended BNF

ISO/TS 15000 Electronic business eXtensible Markup Language ebXML

ISO/TS 15000-1:2004 Collaboration-protocol profile and agreement specification

(ebCPP)

ISO/TS 15000-2:2004 Message service specification (ebMS)

ISO/TS 15000-3:2004 Registry information model specification (ebRIM)

ISO/TS 15000-4:2004 Registry services specification (ebRS)

ISO/TS 15000-5:2005 ebXML. Core Components Technical Specification, Version

2.01(ebCCTS)

ISO 15022 Securities Scheme for messages (Data Field Dictionary)

ISO 15082 Road vehicles Tests for rigid plastic safety glazing materials

ISO 15099 Thermal performance of windows, doors and shading devices Detailed

calculations

ISO 15112 Natural gas Energy determination

ISO 15189 Medical laboratories Particular requirements for quality and competence

ISO 15223 Medical devices Symbols to be used with medical device labels, labelling,

and information to be supplied

ISO/IEC 15288 Systems and software engineering System life cycle processes

ISO/IEC 15289 Systems and software engineering Content of systems and software

life cycle process information products (Documentation)

ISO/IEC 15291 Information technology Programming languages Ada Semantic

Interface Specification (ASIS)

ISO 15403 Natural gas Natural gas for use as a compressed fuel for vehicles

ISO 15403-1 Designation of the quality

ISO/IEC 15408 Information technology Security techniques Evaluation criteria for

IT security

ISO/IEC 15414 - Open data processing - Reference Model - Enterprise Language

ISO/IEC 15434 Information technology Automatic identification and data capture

techniques Syntax for high-capacity ADC media

ISO/IEC 15444 Information technology JPEG 2000 image coding system

ISO/IEC 15445:2000 Information technology Document description and processing

languages HyperText Markup Language (HTML)

ISO 15489-1:2001 Information and documentation Records management Part 1:

General

ISO/TR 15489-2:2001 Information and documentation Records management Part

2: Guidelines

ISO/IEC 15504 Information technology Process assessment

ISO 15614 Specification and qualification of welding procedures for metallic materials

Welding procedure test

ISO 15686 Buildings and constructed assets Service life planning

ISO/IEC 15693 Identification cards Contactless integrated circuit cards Vicinity

cards

ISO 15706 Information and documentation International Standard Audiovisual

Number (ISAN)

ISO 15707 Information and documentation International Standard Musical Work

Code (ISWC)

ISO 15783:2002 Seal-less rotodynamic pumps Class II Specification

ISO 15836 Information and documentation The Dublin Core metadata element set

ISO/IEC 15897 Information technology Procedures for registration of cultural

elements

ISO 15924 Information and documentation Codes for the representation of names of

scripts

ISO 15926 - Integration of Life-cycle Data for Process Plants including Oil and Gas

Production Facilities

ISO 15930 Graphic technology Prepress digital data exchange using PDF[Note 3]

ISO/IEC 15944 - Business Agreement Semantic Descriptive Techniques


Portable Network Graphics (PNG): Functional specification

ISO 15970 Natural gas Measurement of properties Volumetric properties: density,

pressure, temperature and compression factor

ISO 15971:2008 Natural gas Measurement of properties Calorific value and Wobbe

index

ISO 15985:2004 Plastics Determination of the ultimate anaerobic biodegradation and

disintegration under high-solids anaerobic-digestion conditions Method by analysis of

released biogas

ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines

ISO 16232 Road vehicles Cleanliness of components of fluid circuits

ISO 16232-8 Particle nature determination by microscopic analysis

ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter

ISO 16232-10 Expression of results

ISO/IEC 16262 Information technology Programming languages, their environments

and system software interfaces ECMAScript language specification

ISO/IEC 16500 Information technology Generic digital audio-visual systems

ISO 16549 Textiles Unevenness of textile strands Capacitance method

ISO 16750 Road vehicles Environmental conditions and testing for electrical and

electronic equipment

ISO 16792 Technical product documentation - Digital product definition data practices

ISO/TS 16949 Quality management systems Particular requirements for the

application of ISO 9001:2008 for automotive production and relevant service part

organizations

ISO/TR 16982:2002 Ergonomics of human-system interaction Usability methods

supporting human-centred design

ISO/IEC 17020:2012 Conformity assessment -- Requirements for the operation of

various types of bodies performing inspection

ISO/IEC 17021:2011 Conformity assessment -- Requirements for bodies providing

audit and certification of management systems

ISO/IEC TS 17021-2:2012 Conformity assessment -- Requirements for bodies

providing audit and certification of management systems -- Part 2: Competence

requirements for auditing and certification of environmental management systems



requirements for auditing and certification of quality management systems



requirements for auditing and certification of event sustainability management systems



requirements for auditing and certification of asset management systems

ISO/IEC TS 17022:2012 Conformity assessment -- Requirements and

recommendations for content of a third-party audit report on management systems

ISO/IEC TS 17023:2013 Conformity assessment -- Guidelines for determining the

duration of management system certification audits

ISO/IEC 17024:2003 Conformity assessment General requirements for bodies

operating certification of persons

ISO/IEC 17025:2005 General requirements for the competence of testing and

calibration laboratories

ISO 17088:2012 Specifications for compostable plastics

ISO 17202 Textiles Determination of twist in single spun yarns Untwist/retwist

method

ISO/PAS 17506 Industrial automation systems and integration COLLADA digital asset

schema specification for 3D visualization of industrial data

ISO 17776 Petroleum and natural gas industries Offshore production installations

Guidelines on tools and techniques for hazard identification and risk assessment

ISO 17799 - Code of Practice for Information Security Management (superseded by

ISO/IEC 27002)

ISO 17894 Ships and marine technology Computer applications General principles

for the development and use of programmable electronic systems in marine

applications

ISO/IEC 18000 Information technology Radio frequency identification for item

management

ISO/IEC 18000-1 Reference architecture and definition of parameters to be

standardized

ISO/IEC 18000-2 Parameters for air interface communications below 135 kHz

ISO/IEC 18000-3 Parameters for air interface communications at 13,56 MHz

ISO/IEC 18000-4 Parameters for air interface communications at 2,45 GHz

ISO/IEC 18000-6 Parameters for air interface communications at 860 MHz to 960 MHz

ISO/IEC 18000-7 Parameters for active air interface communications at 433 MHz

ISO/IEC 18004 Information technology Automatic identification and data capture

techniques QR Code 2005 bar code symbology specification

ISO/IEC 18009 Information technology Programming languages Ada: Conformity

assessment of a language processor

ISO/IEC 18013 Information technology Personal identification ISO-compliant

driving license

ISO/IEC 18013-1:2005 Physical characteristics and basic data set

ISO/IEC 18013-2:2008 Machine-readable technologies

ISO/IEC 18013-3:2009 Access control, authentication and integrity validation

ISO/IEC 18014 Information technology Security techniques Time-stamping services

ISO/IEC 18023 Information technology SEDRIS

ISO/IEC 18023-1:2006 Functional specification

ISO/IEC 18023-2:2006 Abstract transmittal format

ISO/IEC 18023-3:2006 Transmittal format binary encoding

ISO/IEC 18024-4:2006 Information technology SEDRIS language bindings Part 4:

C

ISO/IEC 18025:2005 Information technology Environmental Data Coding

Specification (EDCS)

ISO/IEC 18026 Information technology Spatial Reference Model (SRM)

ISO/IEC 18033 Information technology Security techniques Encryption algorithms

ISO/IEC 18033-1 General

ISO/IEC 18033-2 Asymmetric ciphers

ISO/IEC 18033-3 Block ciphers

ISO/IEC 18033-4 Stream ciphers

ISO/IEC 18041-4 Information technology Computer graphics, image processing and

environmental data representation Environmental Data Coding Specification (EDCS)

language bindings Part 4: C

ISO/IEC 18042-4:2006 Information technology Computer graphics and image

processing Spatial Reference Model (SRM) language bindings Part 4: C

ISO/IEC 18092 Information technology Telecommunications and information

exchange between systems Near Field Communication Interface and Protocol

(NFCIP-1)

ISO 18117:2009 Surface chemical analysis Handling of specimens prior to analysis

ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray

photoelectron spectroscopy - Guide to the use of experimentally determined relative

sensitivity factors for the quantitative analysis of homogeneous materials

ISO/TS 18152 Ergonomics of human-system interaction Specification for the process

assessment of human-system issues

ISO 18185 Freight containers Electronic seals

ISO 18245 Retail financial services Merchant category codes

ISO/TR 18529:2000 Ergonomics Ergonomics of human-system interaction Human-

centred lifecycle process descriptions

ISO 18541 Road vehicles Standardized access to automotive repair and maintenance

information (RMI)

ISO 18629 Industrial automation systems and integration Process specification

language

ISO 19005 Document management Electronic document file format for long-term

preservation

ISO 19011:2011 Guidelines for auditing management systems

ISO 19092 Financial services Biometrics Security framework

ISO 19101 Geographic information Reference model

ISO/TS 19103 Geographic information Conceptual schema language

ISO/TS 19104 Geographic information Terminology

ISO 19105 Geographic information Conformance and testing

ISO 19106 Geographic information Profiles

ISO 19107 Geographic information Spatial schema

ISO 19108 Geographic information Temporal schema

ISO 19109 Geographic information Rules for application schema

ISO 19110 Geographic information Methodology for feature cataloguing

ISO 19111 Geographic information Spatial referencing by coordinates

ISO 19112 Geographic information Spatial referencing by geographic identifiers

ISO 19113 Geographic information Quality principles

ISO 19114 Geographic information Quality evaluation procedures

ISO 19115 Geographic information Metadata

ISO 19116 Geographic information Positioning services

ISO 19117 Geographic information Portrayal

ISO 19118 Geographic information Encoding

ISO 19119 Geographic information Services

ISO/TR 19120 Geographic information Functional standards

ISO/TR 19121 Geographic information Imagery and gridded data

ISO/TR 19122 Geographic information / Geomatics Qualification and certification of

personnel

ISO 19123 Geographic information Schema for coverage geometry and functions

ISO 19125 Geographic information Simple feature access

ISO 19126 Geographic information Feature concept dictionaries and registers

ISO/TS 19127 Geographic information Geodetic codes and parameters

ISO 19128 Geographic information Web map server interface

ISO/TS 19129 Geographic information Imagery, gridded and coverage data

framework

ISO/TS 19130 Geographic information Imagery sensor models for geopositioning

ISO 19131 Geographic information Data product specifications

ISO 19132 Geographic information Location-based services Reference model

ISO 19133 Geographic information Location-based services Tracking and

navigation

ISO 19134 Geographic information Location-based services Multimodal routing and

navigation

ISO 19135 Geographic information Procedures for item registration

ISO 19136 Geographic information Geography Markup Language (GML)

ISO 19137 Geographic information Core profile of the spatial schema

ISO/TS 19138 Geographic information Data quality measures

ISO/TS 19139 Geographic information Metadata XML schema implementation

ISO 19141 Geographic information Schema for moving features

ISO 19142 Geographic information Web Feature Service

ISO 19143 Geographic information Filter encoding

ISO 19144 Geographic information Classification systems

ISO 19146 Geographic information Cross-domain vocabularies

ISO 19156 Geographic information - Observations and measurements

ISO 19439 Enterprise integration Framework for enterprise modelling

ISO 19440 Enterprise integration Constructs for enterprise modelling

ISO/IEC 19501 Information technology Open Distributed Processing Unified

Modeling Language (UML) Version 1.4.2

ISO/IEC 19502 Information technology Meta Object Facility (MOF)

ISO/IEC 19503 Information technology XML Metadata Interchange (XMI)

ISO/IEC 19752 Information technology Method for the determination of toner

cartridge yield for monochromatic electrophotographic printers and multi-function

devices that contain printer components

ISO/IEC 19757 Information technology Document Schema Definition Languages

(DSDL)

ISO/IEC 19757-2 Regular-grammar-based validation RELAX NG

ISO/IEC 19757-3 Rule-based validation Schematron

ISO/IEC 19757-4 Namespace-based Validation Dispatching Language (NVDL)

ISO/IEC 19770 Information technology Software asset management

ISO/IEC 19785 Information technology Common Biometric Exchange Formats

Framework

ISO/IEC 19788 Information technology Learning, education and training Metadata

for learning resources

ISO/IEC 19790 Information technology Security techniques Security requirements

for cryptographic modules

ISO/IEC 19793 - Open Distributed Processing -- Use of UML for ODP system

specifications

ISO/IEC 19794 Information technology Biometric data interchange formats

ISO/IEC 19794-1:2011 Framework

ISO/IEC 19794-2:2005 Finger minutiae data

ISO/IEC 19794-3:2006 Finger pattern spectral data

ISO/IEC 19794-4:2005 Finger image data

ISO/IEC 19794-5:2005 Face image data

ISO/IEC 19794-6:2005 Iris image data

ISO/IEC 19794-7:2007 Signature/sign time series data

ISO/IEC 19794-8:2006 Finger pattern skeletal data

ISO/IEC 19794-9:2007 Vascular image data

ISO/IEC 19794-10:2007 Hand geometry silhouette data

ISO/IEC 20000 Information technology Service management

ISO 20022 Financial services UNIversal Financial Industry message scheme

ISO 20653 Road vehicles - Degrees of protection (IP-Code) - Protection of electrical

equipment against foreign objects, water and access

ISO/IEC TR 20943 Information technology Procedures for achieving metadata

registry content consistency

ISO/IEC TR 20943-1:2003 Data elements

ISO/IEC TR 20943-3:2004 Value domains

ISO/IEC 21000 Information technology Multimedia framework (MPEG-21)

ISO/IEC 21481 Information technology Telecommunications and information

exchange between systems Near Field Communication Interface and Protocol -2

(NFCIP-2)

ISO 21482 Ionizing-radiation warning Supplementary symbol

ISO 21500 Guidance on project management

ISO 22000:2005 Food safety management systems Requirements for any

organization in the food chain

ISO/TS 22002 Prerequisite programmes on food safety

ISO/TS 22002-1:2009 Prerequisite programmes on food safety Part 1: Food

manufacturing

ISO/TS 22002-2:2013 Prerequisite programmes on food safety Part 2: Catering

ISO/TS 22002-3:2011 Prerequisite programmes on food safety Part 3: Farming

ISO/TS 22003:2013 Food safety management systems Requirements for bodies

providing audit and certification of food safety management systems

ISO 22004:2014 Food safety management systems Guidance on the application of

ISO 22000

ISO 22005:2007 Traceability in the feed and food chain General principles and basic

requirements for system design and implementation

ISO 22093 Industrial automation systems and integration Physical device control

Dimensional Measuring Interface Standard (DMIS)

ISO 22241 Diesel engines NOx reduction agent AUS 32

ISO 22241-1 Quality requirements

ISO 22241-2 Test methods

ISO 22241-3 Handling, transportation and storing

ISO/IEC TR 22250 Information technology Document description and processing

languages Regular Language Description for XML (RELAX)

ISO/IEC TR 22250-1:2002 RELAX Core

ISO 22301:2012 Societal security Business continuity management systems

Requirements

ISO/PAS 22399:2007 Societal security Guideline for incident preparedness and

operational continuity management

ISO 22716:2007 Cosmetics Good Manufacturing Practices (GMP) Guidelines on

Good Manufacturing Practices

ISO/IEC 23003 Information technology MPEG audio technologies

ISO/IEC 23003-1 MPEG Surround

ISO/IEC 23003-2 Spatial Audio Object Coding (SAOC)

ISO/IEC 23270 Information technology Programming languages C#

ISO/IEC 23271 Information technology Common Language Infrastructure (CLI)

ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1

ISO/IEC 23360-1 Generic specification

ISO/IEC 23360-2 Specification for IA32 architecture

ISO/IEC 23360-3 Specification for IA64 architecture

ISO/IEC 23360-4 Specification for AMD64 architecture

ISO/IEC 23360-5 Specification for PPC32 architecture

ISO/IEC 23360-6 Specification for PPC64 architecture

ISO/IEC 23360-7 Specification for S390 architecture

ISO/IEC 23360-8 Specification for S390X architecture

ISO 23733 Textiles Chenille yarns Test method for the determination of linear

density

ISO 23950 Information and documentation Information retrieval (Z39.50)

Application service definition and protocol specification

ISO/IEC 24707:2007 Information technology Common Logic (CL): a framework for a

family of logic-based languages

ISO/IEC 24727 Identification cards Integrated circuit card programming interfa

ISO list 1

Documents

Transcript of ISO list 1