ISO 9001 :2008 - · PDF fileconfectii metalice. manufacturing of welded structures and...
1
SC STENTOR SRL Soseaua Oltenitei, nr.31,Gurcani village, Calarasi County, Romania BureauVeritas Certification Hotding SAS - IJKBranch certify that the Management System of the above organisation has beenaudited and found to be in accordancewith the requirements of the management system standards detailed below ISO9001 :2008 Scope of certffication Rf,ALIZAREA DE CONSTRUCTII SI ANSAMBLE SUDATE, DIJZE NAVALE SI CONFECTII METALICE. MANUFACTURING OF WELDED STRUCTURES AND ASSEMBLIES. NAVAL PROPELLER NOZZLES AND METAL STRUCTURES. Permitted Exclusions: 7.3 Design and or development. Certification cycle start date: 13 Novemb er 2015 Subject to the continued satisfactory operation of the organisation's Management System, thiscertificate expires on: 15 September 2018 Original certification date: 13November 2009 Certificate No.RO2015.059.220eVersion 1, Revision date: 16 October. 2015 SASUK Branch Ceftification body address:66 Prescof Sfreet, London E1 8HG, united Kngdom Local office: 2, Traian street,bl. F1, sc. 3, 1o floor, 030571 Bucharest,Romania Further clarifications regardingthe scope of this certificate and the applicability of the management system requirements may be obtained by consulting the organisation. To checkthis certificate validity please call: +40 (21) 3183800 (BUH/CER/2015/059-220e)
Transcript of ISO 9001 :2008 - · PDF fileconfectii metalice. manufacturing of welded structures and...
SC STENTOR SRLSoseaua Oltenitei, nr.31, Gurcani vil lage, Calarasi County, Romania
Bureau Veritas Certification Hotding SAS - IJK Branch certify that theManagement System of the above organisation has been audited and found
to be in accordance with the requirements of the management systemstandards detailed below
ISO 9001 :2008Scope of certffication
Rf,ALIZAREA DE CONSTRUCTII SI ANSAMBLE SUDATE, DIJZE NAVALE SICONFECTII METALICE.
MANUFACTURING OF WELDED STRUCTURES AND ASSEMBLIES. NAVALPROPELLER NOZZLES AND METAL STRUCTURES.
Permitted Exclusions: 7.3 Design and or development.
Certification cycle start date: 13 Novemb er 2015
Subject to the continued satisfactory operation of the organisation's ManagementSystem, this certificate expires on: 15 September 2018
Original certification date: 13 November 2009
Certificate No. RO2015.059.220e Version 1, Revision date: 16 October. 2015
SAS UK Branch
Ceftification body address: 66 Prescof Sfreet, London E1 8HG, united KngdomLocal office: 2, Traian street, bl. F1, sc. 3, 1o floor, 030571 Bucharest, Romania
Further clarifications regarding the scope of this certificate and the applicability of the management systemrequirements may be obtained by consulting the organisation.To check this certificate validity please call: +40 (21) 3183800 (BUH/CER/2015/059-220e)
