ISE PD Marriott Jaipur. The meeting organizers have negotiated very attractive and competitive room...
Transcript of ISE PD Marriott Jaipur. The meeting organizers have negotiated very attractive and competitive room...
ISEPD
2018 The 19th International Symposuim onEco-materials Processing and Design
The technical program of ISEPD & EXPO will include the participation of globally renowned experts, who will deliver plenary, keynote and thematic talks together with oral presentations (running in five parallel
sessions) over the entire duration of the conference. In addition, posters sessions will be organized to give the younger participants a chance to present their research and interact with their professional peers.
This meeting will offer material researchers and users a valuable opportunity for gaining new knowledge on eco-materials in the fields of green processing, advanced materials, energy conversion, environmental
protection, long-term usage, life-cycle assessment and recycling concepts.
19th International Symposium on Eco-Materials Processing and DesignExpo on Environment-friendly Surface Engineering Technologies
21. – 25.2.2018 | Jaipur Marriott Hotel, Jaipur, IndiaGlobal challenge for sustainable development and resource-efficient technologies has never been higher before. This international summit on eco-friendly and sustainable materials technologies is a premium forum for researchers, engineers and entrepreneurs to discuss the most recent innovation, trends, challenges and solutions adopted for greener technological solutions. This event will bring together participants from academics and industrial sector to share their vision on materials and engineering technologies enabling minimization of the carbon footprint and maximization of resource efficiency. This meeting unites two internationally acclaimed and traditional events namely the International Symposium on Eco-Materials Processing and Design (ISEPD) and Expo on Environment-friendly Surface Engineering Technologies (EXPO) that will facilitate inter-sectoral cooperation.
&
We look forward to welcome you in the „Pink City“!
Co-Organizers:Soo Wohn Lee, Sun Moon University, Korea
Juichi Hojo, Kyushu University, JapanYubao Li, Sichuan University, China
Tohru Sekino, Osaka University, JapanWenbin Cao, University of Science and Technology, Beijing, China
Kyoung Il Moon, KITECH, Incheon, KoreaAnand S. Khanna, Indian Institute of Technology, Bombay, India
Jianfeng Yang, Xian JiaoTong University, Xian, ChinaShu Yin, Tohoku University, Japan
Sahab Dass, DEI, Dayalbagh, IndiaBikramjit Basu, IISc Bangalore, India
Kamalendra Awasthi, MNIT, Jaipur, India
Sincerely,Sanjay MathurConference Chair, ISEPD & EXPO 2018
Key Dates
Abstract Submission Deadline
December 1, 2017
Accepted Abstracts NoticeJanuary 21, 2018
Early Registration Deadline
December 31, 2017
Dr. Thomas Fischer /// Tel +49-221-470-1979 /// Fax +49-221-470-4899E-mail [email protected] /// http://isepd2018.org /// Twitter @isepd_2018ISEPD & EXPO Contact :
http: // isepd2018.org
Abstract Submission:The abstracts must be submitted on-line through the conference website only (http://isepd.org). Please indicate whether an oral or poster presentation is preferred. In particular, young scientists are very welcome to actively contribute to the conference by submitting an abstract. The abstracts will be evaluated in January and the authors will be informed about the kind of presentation (oral or poster).
Symposium A: Materials and Devices for Energy and Sustainability
o Supercapacitors and batteries
o Photovoltaics and photocatalysis
o Sensors for ambient and environmental monitoring
o Hydrogen technologies: generation, storage, utilization
(fuel cells, CO2 conversion)
o New concepts for energy harvesting (piezoelectrics, thermoelectrics)
o In-operando characterization and modelling
Symposium B: Environmental and Functional Coatings
o Innovative surfaces and eco-friendly coating solutions
o Engineered surfaces for barriers, tribological and catalytical applications
o Non-wetting and textured surfaces
o Low temperature processing using sol-gel, plasma and ALD
coating technologies
o In-situ characterization and simulation
Symposium C: Ecological materials, Resource Criticality and Circular Economy
o Ecological and non-conventional processing methods
o Materials substitution and critical resources
(rare earth elements, noble metals)
o (Nano-)Materials toxicity and remediation
o Materials recycling and reutilization
o Life cycle assessment of materials value chain
Symposium D: Materials for Additive Manufacturing and Multi-Materials Integration
o 3D printing and rapid prototyping
o Low temperature net-shaping
o Stimuli responsive materials
o Probes for biomedical and diagnostic applications
o Living and non-living interactions
Symposium E: Hybrid, Nanostructured and Mesoporous Materials
o Materials with dimensional constraints
o Membranes and filters: separation and purification technologies
o Disordered and phase engineered materials and composites (aerogels)
o Multiscale modelling, simulation and characterization
o Materials integration and device technologies
o Interfacial materials and phenomena
o Carbon and non-carbon
Technical Program
Additional travel information and visa regulations are available at http://isepd2018.org
Venue Jaipur, the fascinating capital of the beautiful and colorful state of Rajasthan („Place of Kings“), is
one of the most well-planned cities of its time. Rajasthan is the land of royalty with lavish forts and majestic palaces that are apt reminder of a rich and romantic past that speaks of heroism,
honor and chivalry. Jaipur is the capital city of Rajasthan and cultural hotspot of the region with its colorful vibes and warmness in heart. The graceful architecture of the City that runs across
in pink colour has earned Jaipur the title of „The Pink City“. Jaipur is predominantly known for its musicians, artisans and craftsmen. Today, it is flocked by masses for its fine jewellery, varied textiles and sumptuous cuisine. Rajasthan‘s beautiful Pink City Jaipur, was the stronghold of a clan of rulers
whose three hill forts and series of palaces in the city are important attractions. Jaipur‘s bazaars sell embroidered leather shoes, blue pottery, tie and dye scarves and other exotic wares. Western
Rajasthan itself forms a convenient circuit, in the heart of the Thar desert which has shaped its history, lifestyles and architecture. The famous touristic attractions include: Jantar Mantar, Amber Fort, Moti Doongari and Lakshmi Narayan Temple, City Palace, Royal Albert Hall (Museum), Hawa
Mahal, Jaigarh Fort, Sisodia Rani Garden and the street market in the walled city. We suggest you to at least plan 1-2 spare days before or after the conference for sightseeing while planning your
travel.
AccommodationThe conference headquarters and entire technical sessions and exhibit will be organized at the Hotel Marriott Jaipur. The meeting organizers have negotiated very attractive and competitive room rates that include free Wi-Fi and breakfast. Accommodation bookings should be made directly through the hotel, using the accommodation booking link below. A block of rooms has been reserved for the entire duration of the meeting at the negotiated rates:
Single Room: INR 7,500 (EUR 100, USD 115) / dayDouble Room: INR 8,500 (EUR 115, USD 130) / day
Conference delegates should book their accommodation till 31. December to profit from these special conditions. After this date the rate cannot be guaranteed. Please use the online booking system to reserve your room. Important: Please note that February being the peak tourist and festival as well as marriage season, hotel accommodation gets scarce. Therefore, we strongly recommend to make hotel arrangements at the earliest convenience.
TravelJaipur is well connected by road, rail and air with rest of the country. It has an international airport
that is frequented by national carriers from all major cities in India. For international visitors, the airport provides two convenient flight routes, with direct services to Delhi and Mumbai. These are
only short flights of 45 minutes (Delhi-Jaipur) and 100 minutes (Bombay-Jaipur) that overcome the need long bus journey or night train. Jaipur Airport (JAI) has one unique large passenger
Terminal which operates both with domestic Indian flights and with international flights. The conference venue Marriott Hotel is located in the proximity of the Jaipur airport (5 mins by car).
Additional travel information and visa regulations are available at http://isepd2018.org
Fees and Registration ISEPD & EXPO 2018
Please note: All fees are charged in Euro according to the above categories.Further information on conference registration, abstract submission, hotel booking,
travel information and sight-seeing tours are available at the conference website http://isepd2018.org or via [email protected]
Registration Fees
Full RegistrationEarly-bird (paid by December 31, 2017)
Standard Registration (paid from January 1, 2018)
Members
Full-time Students
Industry Exhibitors
On-Site Registrations
500 EUR
300 EUR
600 EUR
750 EUR
600 EUR
350 EUR
750 EUR
750 EUR
The registration fee includes: ¬ Conference materials¬ Access to oral and poster sessions and exhibit¬ All lunches and coffee-breaks and refreshments during the meeting¬ Welcome reception and dinner on Wednesday evening¬ Conference Dinner & Cultural Event
Delegate Registration: 500 EURStudent (Ph.D.) Registration: 300 EUR
Exhibitor: 600 EUR
Subscribe to our newsletter and follow us on Twitter (@isepd_2018) for most recent updates.
design by www.serebrennikov.de
All participants, speakers and exhibitors must register for the conference.
http://isepd2018.org
ExhibitionThe 2-day EXPO is enabling the industrial participants and exhibitors to showcase
their technologies and products and will bring together the producers of raw materials, engineered materials and application as well as analytical equipment to discuss more
eco-balanced and environmental-friendly materials for their products. Leading companies across surface engineering sectors and paint industries as well as other
advanced manufacturing sectors including semiconductor, automobile, energy, electro-nics and chemical processing industries are invited to participate at this EXPO.
Cat. 1 2m x 2m = 4m2 EUR 2,000 (INR 150,000)
Cat. 2 2m x 3m = 6m2 EUR 3,000 (INR 225,000)
Category Stall dimensions Cost
EXPO reservations and further information on floor plans and stall layout is available on the conference website http://isepd2018.org.
Please note: All fees are charged in Euro according to the above categories.
ISEPD 2018 is organized by Materials Alliance Cologne, Steinbeis Transfer Centre of the Steinbeis GmbH für Technologietransfer, Cologne, GERMANY www.materialsalliance.com; [email protected]
General Chair:
Conference Chair: Sanjay Mathur, University of Cologne, GermanyVice Chair: Anand S. Khanna, IIT Bombay, India
OrganizationKoichi Niihara, Nagaoka University of Technology, JapanKozo Ishizaki, Nagaoka University of Technology, JapanSoo Wohn Lee, Sun Moon University, KoreaYubao Li, Sichuan University, China
International Advisory Committee(in alphabetical order)
Rameshwar Adhikari, Tribhuvan University, Nepal Alfredo Aguilar-Elguezabar, CIMAV, Mexico
Detlef Bahaneman, University Hannover, GermanyAusrine Bartasyte, University of Besançon, France
Wen Bin Cao, University of Science and Technology Beijing, ChinaB.V.R. Chowdari, Nanyang Technological University, Singapore
Silke Christiansen, Helmholtz-Zentrum Berlin for Materials and Energy, GermanyZheng Yi Fu, Wuhan University of Technology, China
Lian Gao, Shanghai Institute of Ceramics, ChinaKlass de Groot, Leiden University, The Netherlands
Yoon-Bong Hahn, Chonbuk National University, KoreaSimo-Pekka Hannula, Helsinki University of Technology, Finland
Jian-Feng Huang, Shaanxi University of Science and Technology, ChinaJow-Lay Huang, National Cheng Kung University, Taiwan
Bo Young Hur, Kyung Sang National University, KoreaRobert Hurt, Brown University, USA
Chennupati Jagadish, Australian National University, AustraliaRamanand Jagtap, Institute of Chemical Technology (ICT) Mumbai, India
Lei Jiang, Beihang University, ChinaByung Se Jun, Kyungnam University, KoreaHiroshi Kageyama, Kyoto University, Japan
Hidehiro Kamiya, Tokyo University of Agriculture & Technology, JapanGirish Kale, University of Leeds, UK
Esko I. Kauppinen, Aalto University, FinlandKwang-Ho Kim, Busan National University, Korea
Hikaru Kobayashi, ISIR, Osaka University, JapanHua-Tay Lin, Guangdong University of Technology, China
Joaquin Lira-Olivares, Simon Bolivar University, VenezuelaBanh Tien Long, Hanoi University of Science and Technology, Vietnam
Graziella Malandrino, Universita‘ di Catania, ItalyDjega Marriadassou, Paris VI University, France
Junichi Matsushita, Tokai University, JapanAlexander Michaelis, Fraunhofer IKTS, Dresden, Germany
Kyoung Il Moon, KITECH, KoreaJuan-Ramon Morante, IREC, Spain
Hideo Nakajima, The Wakasa Wan Energy Research Center, JapanKarunakar Nanda, IISc, BangaloreTatsuki Ohji, AIST Nagoya, Japan
Feng Pan, Tsinghua University, ChinaRamaseshan Rajagopalan, IGCAR, Kalpakkam, India
Amrit Rekhi, Society for Surface Protective Coatings (SSPC-India), IndiaArmin Reller, Augsburg University, Germany
Ali Rostami, Tabriz University, IranAvner Rothschild, Technion, Israel
Ke-Zheng Sang, Chang‘an University, ChinaTohru Sekino, Osaka University, Japan
Mohamed Siaj, UQAM, Montreal, CanadaDileep Singh, Argonne National Lab., Chicago, USA
Mrityunjay Singh, Ohio Aerospace Institute, USAP. S. Singh, Federation of Indian Chambers of Commerce and Industry (FICCI), India
Katsuaki Suganuma, ISIR, Osaka University, JapanHirotsugu Takizawa, Tohoku University, Japan
Nirav Thakkar, Kusumoto Chemicals Ltd., IndiaSomchai Thongtem, Chiang Mai University, Thailand
Leticia M. Torres-Martinaz, Univeridad Autonoma De Nuevro Leon, MexicoHarry Tuller, MIT, USA
Mustafa Ürgen, Istanbul Technical University, TurkeyJingyang Wang, IMR Shenyang, China
Xianhong Wang, ChangChun Institute of Applied Chemistry, ChinaGunnar Westin, Uppsala University, Stockholm, Sweden
Jian-Feng Yang, Xi‘an Jiaotong University, ChinaJun Yang, Xi‘an University of Architecture and Technology, China
Kouichi Yasuda, Tokyo Institute of Technology, JapanGuobin Zheng, Nagasaki University, Japan
Shao Xiong Zhou, Advanced Technology & Materials Co. Ltd, China