IQ Analyzer6400/6600 Series

Cutler-HammerPower Management Products

High End Metering Capabilities

22

Available Available May 2000May 2000

New IQ Analyzer

6400/6600 6400/6600 SeriesSeries

33

Power Quality Monitoring

• Over 150 metered parameters for comprehensive diagnostics

• Assess trends, harmonics and waveforms to prevent process disruptions and equipment damage

• Isolate and diagnose power quality problems by analyzing historical metered data

• Control energy usage and costs via measurement, on-board data storage and time-of-use registers

IQ Analyzer

44

Revenue metering accuracy ANSI C12.16 ( 1% ) ANSI C12.20 ( 0.5% ) IEC 687 / Canada ( 0.5% ) Independent certification

Time Of Use Registers Expanded event storage UL/CUL/CE

(CSA applied for) New Display & Faceplate 4 Custom Display Screens

Overview

55

IQ Analyzer Key Features

• High-speed waveform capture– Programmable event triggers– 2 cycles @ 128 samples/cycle & 8 cycles @ 32

samples/cycle– 11 channels of voltage & current information are

saved– Local display of waveform (6600 series only)

• Measures current and voltage through 50th harmonic– Display harmonic spectrum on local display (6600

series only)

66

IQ Analyzer Key Features

• CBEMA/ITIC event display via PowerNet• dv/dt trigger captures subcycle voltage

disturbances (6600 series only)• Communication flexibility:

– INCOM via IPONI– Ethernet via EPONI & EPONIF– RS-232 via RS232PONI– Modbus via MPONI (Coming Soon!)

77

IQ Analyzer Key Features

• The IQ Analyzer stores 44 different minimum & maximum values including:– Current– Voltage– Power– Power Factor– Frequency– THD

88

IQ Analyzer Key Features

• On-board event data logging • Auxiliary I/O capabilities

– Analog Outputs (3) 0-20mA/4-20mA 1% accuracy

– Analog Input (1) 0-20mA/4-20mA 1% accuracy

– Digital Inputs (3) optically isolated +30Vdc– Digital Outputs (4) Form C contacts 10A @

240Vac

99

IQ Analyzer Key Features

• Monitors L-L, L-N, L-G and N-G voltage– PT ratios from 1:1 to 5,000:1

• Monitors phase, neutral and ground current– CT ratios from 5:5 to 10,000:5– Up to 40A continuous, 300A for 1 second

• Measures % Total Harmonic Distortion (THD) for current and voltage

1010

New Features• New Trending Capabilities

– 4 Independent trends– Up to 6 parameters per trend– Can chose from over 94 parameters – Total of 90K bytes of storage

• Single parameter every 15 min. for 234 days

– Independent memory allocation for each trend

– Used with PowerNet for CBEMA/ITIC curve plotting utility

1111

CBEMA Curve Utility

1212

New Features• New Trending Capabilities

– Sampling rate can be set from 8 cycles to 5040 minutes (3 1/2 days)

– Trend 1-3 can save data on a discrete input– Trend 4 can save data on an event– If the time period is set for an integer divisor

of 60 the period starts at the next full hour.

1313

New Features

• Data Logging Features– Time & Reason for last 504 Events– Any meter event is saved– New Status Change Indicators

• Time of Alarms• Power Up• Resets• Setting Changes• INCOM Connection

1414

New Features• In addition to the data logging of the

last 504 events last 10 Waveform Events are also stored

• The real time clock can be synchronized to the line to correct for long term errors (w/o PowerNet)

• Programmable CT Polarity Setting– Change CT polarity from calibration menu– Last event under “Power Factor”

1515

New Features

• Time Of Use (TOU) Energy Registers– 32 Schedules

• 8 Weekday - 8 Holiday• 8 Saturday - 8 Seasons• 8 Sunday

– Each schedule can change 9 times a day– 4 Different utility rates– Watt-hours, VAR-hours, VA-hours recorded

1616

New Features

• TOU Demands– Amps, Watts, VARS & VA

1717

Improvements• New Case

– Polycarbonate for higher durability & temperature

– Rugged outer edge– Reset button changed from red to blue

• New Display– Reverse mode, LED

backlit LCD– Yellow on black– High reliability

1818

Improvements

• Custom Screen Enhancements– Allows programming of 7 parameters

per screen– Now 4 custom screens– List of programmable items extended

• Clock• Min/Max Values since last trend• Magnitude THD (V and A)

– Displays each screen for 5 seconds

1919

New IQ Analyzer

• Old IQA6000/6200 catalog numbers replaced with new 6400/6600 series– IQA6410 - Separate Source PS– IQA6420 - DC PS– IQA6430 - Self Powered Three Phase PS– IQA6610 - Separate Source PS

w/waveform– IQA6620 - DC PS w/waveform– IQA6630 - Three Phase PS w/waveform

2020

• Instruction book changes to TD 17530B

• New Technical Data available– TD.17.02A.T.E

• New Color Brochure available– B.17C.01.S.E

Support Material

2121

Literature/Sales Tools/Getting Help

www.ch.cutler-hammer.com/pmp

Power Management Applications Support800.809.2772

Power Management Sales Managers

CHESS Power Automation Specialists

Product Guide - PG.17.01A.T.E

2222

Wrap UP

• Product Feedback• PMPC Support• Questions & Answers

•Thank You!Thank You!