Ips Catalog
Transcript of Ips Catalog
-
WARNING
Copyright 2002, Parker Hannifin Corporation, All Rights Reserved
Offer of Sale
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSEDEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options forfurther investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerningthe product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, throughits own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warningrequirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by ParkerHannifin Corporation and its subsidiaries at any time without notice.
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer andits acceptance are governed by the provisions stated in the "Offer of Sale".
-
Welcome to IPS Industrial ProfileSystems, now a member of theParker Hannifin Corporation.
The innovative modular T-slotaluminum profile system hasconquered the world of machinebuilding. It offers so muchflexibility and cost savings inengineering, fabrication, andassembly; that it is now thepreferred way to design and buildevery imaginable framestructure or enclosure forunlimited applications.
IPS has been a leader in thisindustry in North America for thelast 15 years.The integration ofIPSs extensive product line andstrong service center networkinto Parkers Automation Groupcreates synergies and newbusiness opportunities forgrowth that are clearly structuredto benefit our customers. Beinga member of the worldwideParker Hannifin organizationmakes us an even strongerpartner for you in the future.
The commitment of thecombined IPS and Parker Teamis to service your needs.
Introduction ............................................................................................... 1Innovative Solutions .................................................................... 2Custom and Special Application Needs ..................................... 5Largest Selection of Profiles and Components ....................... 10
1 Profiles ................................................................................................ 14Technical Data .......................................................................... 1440 Series Profiles ..................................................................... 1745 Series Profiles ..................................................................... 2830 Series Profiles ..................................................................... 3028 Series Profiles ..................................................................... 3120 Series Profiles ..................................................................... 34Guarding and Enclosure Profiles ............................................. 35Miscellaneous Profiles ............................................................. 41Profile End Caps ....................................................................... 46Conduit Elements ..................................................................... 47
2 Hardware ............................................................................................ 56Fastening Components ............................................................ 57Leveling Feet, Base Plates and Casters .................................. 77Hinges, Handles, Locks & Latches .......................................... 88Panels, Panel Mounting & Other Accessories ....................... 108Pneumatic Components ........................................................ 125Workstations, and Workstation Accessories .......................... 131
3 45 Series Profiles ............................................................................ 140
4 Linear Applications .......................................................................... 148IPS Roller Systems ................................................................. 149Linear Guide Components ..................................................... 155Linear Drive Components ...................................................... 165Linear Modules ....................................................................... 173Profile Slide Blocks ................................................................. 174Slide Bushing Linear Systems ............................................... 176Linear Rail and Conveyor Profile ............................................ 179UHMW Slide Blocks and Systems ......................................... 184
5 Services and Tools ........................................................................... 196Software .................................................................................. 196Tools and Tool Carts ............................................................... 199Processing Services ............................................................... 201
6 Technical Guide and Index ............................................................... 207By Part # .................................................................................. 208By Description ......................................................................... 212Parker to IPS Cross ................................................................ 220Offer of Sale ............................................................................. 224
2
3
4
5
6
1
Table of Contents
I
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, Tx 77066
Catalog 1816IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
-
Since 1987 IPS, now a member of
Parker Hannifin Corporation
has served many
industries
throughout North
America with its
innovative high
strength aluminum
framing systems
for machine
building and
industrial
applications.
The versatility of
this modular
erector set system makes it ideally suitable for
machine bases and frames, linear slide
systems, safety guarding and enclosures,
worktables, structural framing and material
handling.
Modular aluminum structures offer high
flexibility and functionality combined with visual
appeal and cleanliness of the anodized surface.
These important features present a multitude of
benefits for machine building and automation
projects in industries such as pharmaceutical,
medical,
semiconductor,
electronics,
automotive
component
A Commitment to Customer Service...
Customer service and
customer satisfaction
is our objective.
IPS service centers are
located across North
America support our
customers with local
inventory, engineering,
fabrication, assembly
and installation.
A team of
knowledgeable
professionals and
experienced application
engineers have the expertise necessary to
provide and implement whatever IPS
solution you require.
/design
assistance, as well
as assembly and
installation services.
Our IPS service centers
are stocked with a broad
selection of T-slotted profiles and
accessories. Thus we are able to react
quickly to meet customer's needs in
today's fast paced global economy.
We work closely with customers on
applications that may require custom parts
and specials,
engineering
As a solution provider, IPS offers products and services such as:
Standard length profiles
Custom cut profiles
Modular structures
Bases and frames
Workstations
Safety guards and enclosures
Slides and linear devices
Material handling systems
Services
Regional Service Centers across the US, Canada, and Mexico
Engineering support
Applications assistance
Onsite installation and assembly
CAD and design services
Rapid product delivery
II
Innovative Solutions for Your Structural Framing Needs
-
WELDED V.S. MODULAR
Compared to welded steel frames, IPS
modular aluminum framing systems
offer unique benefits. The strength is
comparable to steel, yet the flexibility
and versatility is far superior. The pre-
engineered IPS system enables you to
reduce the lead-time for engineering
and fabrication. Modifications and
changes are easily made through all
stages of the evolution of your
projects.
Important Benefits When Using Aluminum Modular Framing Systems from IPS:
Extremely short turnaround from design
to completion.
No welding
No cleaning
No grinding
No distortions
No painting
Lower total cost through elimination of
costly traditional manufacturing
processes.
Serving Limitless Industries in an Unlimited Range of Applications
IPS modular
framing profiles
are successfully applied in an astounding
variety of environments; from automotive to
aerospace, from electronics to packaging,
from pharmaceutical/medical to textiles.
The following are just some of the industries
where IPS modular framing solutions have
proven their worth:
Aerospace
Automotive
Educational
Electronics
Industrial Manufacturing
Medical
Packaging
Pharmaceutical
Plastics
Semiconductor
Textiles
Tires
III
Modular Solutions to Fit Your Needs
-
Profiles
Fasteners
Linear Motion
Accessories
The extensive product range comprises many different profile shapes. This provides the user with flexibility to apply the components most suitable for his application. The IPS product line includes cross sections from small miniature profiles up to sturdy heavy-duty structural beams that support static and dynamic loads in motion applications, and conduit profiles for pneumatic and electrical needs.
Available in metric sizes from 20mm to 160mm with 5mm, 8mm, 10mm T-slots.
Fabricated from high strength structural aluminum (6005 T5 and 6061 T6).
Offered with clear or black anodized finish.
IPS applies the unique T-slot concavity design for vibration safe permanent pretension of the fastener connection. A variety of standard and universal connectors offer unique design features and flexibility. The vibration safe fastening system from IPS is functional because our profiles are made of high strength alloys. It is this particular feature that has made IPS a leader in our industry and eliminates, in most cases, the need for additional gusset plates.
Metric fastening hardware sizes - M5, M6, M8, M10.
English hardware sizes - 1/4-20, 5/16-18, #10-32.
With its linear motion solutions, IPS has gone beyond the basic framing and guarding requirements. We offer roller bearing modules and DELRIN slide blocks for motion and positioning applications.
No aluminum framing systems is complete without its complimentary range of accessories. That's where IPS differs. IPS offers an extensive range of complimentary accessories such as fasteners, hinges, locks, handles, latches, feet, and casters, that make a true pre-engineered system, a single source solution for all your needs.
IPS can furnish you with accessories such as:
Hinges (plastic and metal)
Safety Limit Switches
Leveling Feet and Casters
Plates, Joints and Connectors
Handles, Locks, Latches Cable and Hose Holders
Panels - Trespa, Wire Mesh, Sintra, Polycarbonate (Lexan)
Sliding Door Components
Parts Bins
Assembly Tools
IV
Complete Line of Profiles and Accessories
Conduit Elements
Fasteners & Connectors
Machine Guarding Components
Pneumatic Components
Feet, Base Plates & Casters
-
For non-standard or unique applications; that's where
a solution provider like IPS becomes invaluable. At IPS
we have the ability to work with you in designing,
fabricating and assembling a framing solution that
integrates with the latest machine technologies.
Whether you're looking to incorporate a material
handling system, linear device, conveyor or a clean
room environment, IPS has the resources to provide
you a unique customized solution to match your
application requirement.
V
For Custom/Special Application Needs.Automation, Assembly, Enclosures, and Linear Motion
Dial table with fixturingHigh speed automated packaging machine
Guarding enclosure using tempered glass
Roller system 14 on an inspection line
Pick and Place GantrySupport structure for drilling apparatus to clean spent fuel
remains from space shuttle solid fuel rocket boosters
Surface Mount Circuit Board Processing Machine
-
6Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
Catalog 1816 IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932Introduction
I
Examples of Industrial and MachineBuilding Applications
-
7IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX77066
800-333-4932
Catalog 1816Introduction
I
-
8Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
Catalog 1816 IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932Introduction
I
Examples of Industrial and MachineBuilding Applications
Guarding enclosures creating mountingsurfaces for hydraulic control system andpivoting enclosures providing safety for thework space.
Lighter Aluminum frame of a crane simulatorbooth, that offers lower total cost by utlizingsmaller hydraulic and pneumatic controlsystems components.
-
9IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX77066
800-333-4932
Catalog 1816Introduction
I
Flexible storage systems that allowingaccurate initial construction, and ability toadapt to new specifications.
Workstations creatinguniform work environment inassemble line applications.
-
10Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
Catalog 1816 IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932Introduction
I
20 Series40 Series
28 Series
30 Series
40 Series
12-120 p34
12-020 p34 12-124 p34 12-040 p34z 12-126 p34 12-081 p34 12-125 p34 10-041 p35 10-042 p35 10-083 p20
12-028 p31 12-128 p31 12-228 p31 12-328 p31 12-044 p31 12-043 p33 10-086 p20 10-085 p20
12-428 p32 12-528 p32 12-628 p32 12-728 p32 10-056 p 33
10-089 p2010-081 p21
12-030 p30 12-034 p 30 12-033 p30 12-060 p30 12-066 p30
10-680 p22 10-080 p22 10-180 p22
10-016 p21 10-540 p18 10-040 p18 11-040 p18 10-340 p19
10-140 p19 10-240 p19 10-440 p19 11-540 p18 10-043 p19
10-044 p20 11-044 p20 10-045 p20 10-060 p20
11-080 p22 14-428 p180 11-100 p24
-
11
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX77066
800-333-4932
Catalog 1816Introduction
I
45 Series 50 Series
40 Series
10-088 p25 11-088 p25 11-089 p26 10-120 p23 11-120 p23
10-161p21
10-164 p23
11-140p 23
11-084 p24 11-124 p24
10-122 p 25 11-122 p 25 10-160 p26 11-160 p26
14-040 p28 14-045 p28 14-090 p28 10-550 p27 10-580 p27
11-128p24
-
12Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
Catalog 1816 IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932Introduction
I
Shaft & Clamp
Linear
Conduit
13-506 p153
13-510p155
13-514 p157 13-525 p161 13-566 p171
13-106p153
13-110p155
13-114p157
13-700p172
13-125p161
13-230p179
13-406p179
13-014p179
13-010p179
13-011p179
15-046p 51
15-040p51
15-041p52
15-083p52
15-086p51
15-080p51
13-220p180
13-025p179
15-120p51
15-160p51
15-081p52
15-121p52
15-161p52
15-162p53
15-122p53
15-082p53
15-042p53
15-085p53
-
13
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX77066
800-333-4932
Catalog 1816Introduction
I
Door
T-Slot Coverings
Slide
Gussetts
Safety Enclosures
Panel
Miscellaneous
12-031p36
12-032p37
12-023p36
12-828 p33
11-056 p27
10-036p27
14-450p181
14-150p181
14-100p182
14-160p182
12-012 p39 12-014 p39
12-013 p39 12-015 p39 12-018 p40
12-011 p39
12-022 p38
12-101p45
12-102p45
12-103p45
12-104p45
12-106p44
12-112p44
12-107p44
12-115p45
12-108p44
12-116p45
12-111p45
12-114p44
A40709 A40701 A40715 A40721
A40710 A40706 A40716 A40703
A40713 A40704 A40707 A40708
10-011p35
12-105p42
12-010p40
12-016p40
12-109p41
20-102Z4p42
21-057Z4p42
12-400p43
13-410p183
13-430p183
13-810p183
12-420p43
12-430p43
14-348p182
12-410 p43 12-421 p38
-
114Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
y All structural IPS profiles are prime aluminum, mill-certified withmetallurgical properties of 6005-T5, 6061-T6, 6063-T6 or 6105-T5
specifications.y Yield (0.2 limit) Rm min. 240 N/mm2 (35,000 psi)y Tensile strength Rm min. 260 N/mm2 (38,000 psi)
Note: Cross sectional thickness variations of the profiles may influenceyield and tensile strength.
y Elongation for 2 in. long specimens:6005-T5 (thickness up thru 0.124 in.), 6061-T6 (up thru 0.249 in.), 6105-T5(up thru 0.5 in.) - 8% min6005-T5 (thickness 0.125-1 in.), 6061-T6 (0.25 in. and over) - 10% min
y Elasticity E approximately 70,000 N/mm2 (10,150 kpsi)y Brinell Hardness approximately 75 HB 2.5/187.5y The molecular structure of the 6005-T5 alloy is generally stable in an
ambient temperature range of:-40C to +200C-40F to +392F
Extreme temperature fluctuations may change the mechanicalproperties.
Profile Finish y Clear anodizing: AA M10, C22, A31, Cleary Black anodizing: AA M10, C22, A34, Blacky Minimum depth: 0.010mm (0.0004 in.)y Surface hardness: approximately 250 HV, outer surface exposedy Custom anodizing and protective finishes available
y Outer dimensions depending on size (0.2 - 0.4)mm.y Extrusions conforming to DIN 17 615 specifications and to IPS
blueprints.y Twist per 300mm (1 ft.) length not to exceed 0.25 and total twist over
6m (20 ft.) length not to exceed 1.5.y Flatness 0.10mm (0.004 in.) per 25mm (1 in.) of width.y Straightness 0.32mm (0.0125 in.) per 300mm (1 ft.) of length and not
exceeding 3mm (0.12 in.) over 6m (20 ft.) of extrusion.Maximum bow 3mm (0.12 in.) over 6m (20 ft.)
Tolerances
Defined Rest Points
Mechanical Properties
High Strength Aluminum Profiles
Technical Data
All 40, 30, 28, and 20 series profiles have a face to T-slot slope. Preload inthe material elastic range results in a vibration safe connection because theT-slot lips are pulled flush with the connecting surface. The high qualitymaterial used insures the profile T-slot will remember its original shape ifdisassembly is required, making all IPS profiles completely reusable.
Profile Series Preload Range40 0.2 mm30 0.2 mm28 0.2 mm20 0.1 mm
-
115
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
Standard SizeIncrements
Constant size increment permitscombination of all sizes and use ofcommon accessories.
30 Series40 Series
30 Series40 Series
Typical Dimensions
T-slot SystemHigh accuracy of T-slotsup to 80x40 Profile 8+.2mmfrom 80x80 Profile 8+.3mm
T-slot and pilot hole center to centertolerances are 0.2mm
20 Series28 Series
20 Series28 Series
-
116Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
10-016 21 16x40 Support 1.06 6.97 1.23 3.49 4.33 1.1710-036 27 36x36 Post 8.55 8.55 4.32 4.32 7.18 1.9410-040 18 40x40 Standard 9.46 9.46 4.73 4.73 6.65 1.7210-041 35 40x40 Clamp 11.4 11.4 5.55 5.55 7.4 2.310-042 35 40x40 Bi-Clamp 13 11.4 6.2 5.7 8.38 2.2610-043 19 40x40 Quarter Round 6.85 6.85 3.12 3.12 5.86 1.5810-044 20 40x40-45 Standard 6.71 6.71 2.98 2.98 5.68 1.5310-045 20 40-45 16.27 34.39 7.43 9.62 10.22 2.7610-060 20 40-60 12.73 42.73 6.08 10.93 9.35 2.7610-080 22 80x40 Standard 71.97 17.23 17.99 8.62 11.53 3.1810-081 21 16x80 Support 2.15 50.76 2.69 12.69 8.13 2.210-088 25 80x80 Standard 138.3 138.3 34.58 34.58 20.17 5.4510-120 23 40x120 Standard 220.54 24.22 36.76 12.11 16.12 4.3510-122 25 80x120 Standard 421.67 201.95 68.34 50.49 30.15 8.1410-140 19 40x40 Bi-Slot Corner 8.55 8.55 4.28 4.28 6.12 1.5910-160 16 160x80 Standard 922.5 271.1 115.3 67.8 38.1 10.2910-164 23 160x40 Standard 517.25 33.13 64.65 16.56 21.48 5.810-180 22 80x40 Tri-Slot Corner 65.87 16.37 16.46 8.19 10.9 2.8310-240 19 40x40 Bi-Slot Midframe 9.36 9.36 4.68 4.68 7.1 1.9210-340 19 40x40 Tri-Slot 9.13 9.82 4.57 4.78 6.75 1.8210-440 19 40x40 Mono-Slot 8.42 8.66 4.07 4.33 5.77 1.5610-540 18 40x40 Light 7.41 7.41 3.71 3.71 4.87 1.3510-550 27 50x50 19.7 19.7 7.88 7.88 9.81 2.7110-580 27 50x80 78.75 30.5 19.69 12.2 13.58 3.7510-680 22 80x40 Light 60.05 15.4 15.01 7.7 8.9 2.411-040 18 40x40 Heavy 14.18 14.18 7.09 7.09 9.22 2.5311-044 21 40x40-45 Heavy 9.4 9.4 4.07 4.07 7.33 1.9811-056 27 56x56 Heavy 45.62 45.62 14.81 14.81 13.07 3.5311-080 22 80x40 Heavy 102 26.73 25.5 13.37 16.59 4.5811-088 25 80x80 Heavy 185.2 185.2 46.3 46.3 26.01 7.0211-100 24 40x100 Heavy 190.29 30.84 38.06 15.42 17.88 4.9411-122 25 80x120 Heavy 575.07 274.46 92.75 68.61 40.08 10.8211-128 24 160x28 Heavy 732.11 20.45 91.51 14.36 31.33 8.4611-140 23 160x40 Heavy 749.51 54.8 93.6 27.4 32.3 8.7211-160 26 160x80 Heavy 1215.79 357.51 151.97 89.38 51.72 13.9611-540 18 40x40 Heavy Square 15.81 15.81 7.9 7.9 7.99 2.1612-020 34 20x20, 20 Series 0.72 0.72 0.72 0.72 1.85 0.5212-028 31 28x28 Quad-Slot 2.41 2.41 1.72 1.72 3.01 0.8112-030 30 30x30 3.13 3.13 2.09 2.09 3.31 0.912-033 30 30x30 Quarter Round 2.71 2.71 1.70 1.70 3.26 0.8812-034 30 30x30 Bi-Slot Corner 3.49 3.49 2.22 2.22 3.68 0.9912-040 34 40x40, 20 Series 8.55 8.55 4.27 4.27 4.9 1.3212-044 31 28x28-45 2 2 1.3 1.3 2.89 0.7812-060 30 30x60 21.1 6 7.04 4.01 6.1 1.6512-066 30 60x60 39 39 13 13 9.61 2.612-081 34 80x14, 20 Series 41.01 1.14 10.25 1.57 6.65 1.812-120 34 20x10 0.53 0.12 0.53 0.24 1.29 0.3512-124 34 20x40 5.01 1.27 2.5 1.27 3.18 0.8612-125 34 20x80 36.4 2.7 9.1 2.7 6.19 1.6712-126 34 20x60 16.02 2.04 5.34 2.04 4.73 1.2812-128 31 28x28 Tri-Slot 2.69 2.41 1.82 1.72 3.18 0.8612-228 31 28x28 Bi-Slot Corner 2.71 2.71 1.84 1.84 3.37 0.9112-328 31 28x28 Bi-Slot Midframe 3.02 2.43 2.16 1.73 3.37 0.9112-428 32 28x56 Open-Slot 4.67 16.56 3.33 5.91 5.66 1.5312-528 32 28x56 Tri-Slot 5.28 18.61 3.57 6.46 6.21 1.6812-628 32 28x56 Bi-Slot 5.92 18.05 4.23 6.44 6.39 1.7312-728 32 28x56 Quad-Slot 5.26 17.3 3.55 6.18 6.03 1.6314-040 28 45x45 Light 11.23 11.23 4.99 4.99 5.69 1.5714-045 28 45x45 15.81 15.81 7.03 7.03 8.25 2.2314-046 28 45x60 Light 17.3 28.52 7.69 9.51 8.88 2.414-090 28 45x90 32.2 124.4 14.31 26.74 15.25 4.12
Profiles by Part NumberPart # Page Description Moment of Inertia Section Modulus Section
(cm2)Weight(kg/m)IY
(cm4)IX
(cm4)WX
(cm3)WY
(cm3)
-
117
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
Servicing for Standard Fastening Set 40(20-002, 20-002SS, 20-014) requiresM8x16 tap and 7mm access hole throughthe profile.American Fastening Set (25-003) requires5/16-18 tap.
40 Series Profiles
Typical ServicingDimensions
Servicing for Universal Fastening Set 40(20-004, 25-004) requires bore 20mm x16mm deep into the slot.Pneumatic Universal Fastening Set(20-011) requires bore 20mm x 6mmdeep.
-
118Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
ApplicationProfile for general engineering structures, weight optimized.Basic fasteners: Standard & Heavy profile: 20-002, 20-004, 20-006,25-003,25-004 Light profile: 20-014, 20-011, 20-012
Technical DataAl, clear or black anodized
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
10-540 7.41 7.41 3.71 3.71 4.87 1.35 10-040 9.46 9.46 4.73 4.73 6.65 1.72 11-040 14.18 14.18 7.09 7.09 9.22 2.53
Description Unit Part #Clear Black
Profile 40x40 Light cut off max. 6M 10-540 10-540Bpkg of 16 at 3M ea. 10-540-3 10-540B3pkg of 16 at 6M ea. 10-540-6 10-540B6
Profile 40x40 Standard cut off max. 6M 10-040 10-040Bpkg of 16 at 3M ea. 10-040-3 10-040B3pkg of 16 at 6M ea. 10-040-6 10-040B6
Profile 40x40 Heavy cut off max. 6M 11-040pkg of 16 at 3M ea. 11-040-3pkg of 16 at 6M ea. 11-040-6
Saw cut necessary for cut to length 19-001
End Cap 40x40 1 pc 18-813Secure End Cap 40x40 1 pc 18-913
40 Series
Profile 40x40 Heavy SquareHeavy duty profile for engineeringstructures where T-slots are notdesirable. A 28x28 profile can slideinto the inside cavity. Accessories,such as hinges, may be attachedanywhere with required machining.Attachment to T-slot of a 40 seriesprofile requires machining (19-054)and fastening set (20-054).
Technical DataAl, clear anodizedFastening set 20-054 includes:aluminum block, M8 x 20 BHCS, flatplate, spring tension pin 8 x 40.
Description Unit Part #Profile 40x40 Heavy Square cut off max. 6M 11-540
pkg of 16 at 6M ea. 11-540-6Saw cut necessary for cut to length 19-001Fastening Set Pfl 40x40 Heavy Sq 1 set 20-054Service to mount Fast. Set 20-054 each 19-054End Cap 40x40 Heavy Square 1 pc 18-805
10-040
11-040
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
11-540 15.81 15.81 7.90 7.90 7.99 2.16
10-540
11-540
-
119
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
1
3
2
4
10-140
10-240
10-340
10-440
ApplicationGeneral engineering structures, weight optimized. Particularly useful wheresmooth, aesthetic appearance is desired. Use Light Standard Fastener(20-014). Profile 10-440 uses Flat Plate Fastener (20-028).
Technical DataAl, clear or black anodized
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
10-140 8.55 8.55 4.28 4.28 6.12 1.59 10-240 9.36 9.36 4.68 4.68 7.10 1.92 10-340 9.13 9.82 4.57 4.78 6.75 1.82 10-440 8.42 8.66 4.07 4.33 5.77 1.56 10-043 6.85 6.85 3.12 3.12 5.86 1.58
Description Unit Part #Clear Black
Profile 40x40 Bi-Slot Corner cut off max. 6M 10-140 10-140Bpkg of 16 at 3M ea. 10-140-3 10-140B3pkg of 16 at 6M ea. 10-140-6 10-140B6
Profile 40x40 Bi-Slot Midframe cut off max. 6M 10-240 10-240Bpkg of 16 at 3M ea. 10-240-3 10-240B3pkg of 16 at 6M ea. 10-240-6 10-240B6
Profile 40x40 Tri-Slot cut off max. 6M 10-340 10-340Bpkg of 16 at 3M ea. 10-340-3 10-340B3pkg of 16 at 6M ea. 10-340-6 10-340B6
Profile 40x40 Mono-Slot cut off max. 6M 10-440pkg of 16 at 3M ea. 10-440-3pkg of 16 at 6M ea. 10-440-6
Profile 40x40 Quarter Round cut off max. 6M 10-043Saw cut necessary for cut to length 19-001
End Cap 40x40 1 pc 18-813Secure End Cap 40x40 1 pc 18-913End Cap 40x40 Quarter Round 1 pc 18-843
1 Universal Fastening Set20-004 on 40x40 Bi-SlotCorner profile
2 Connecting three 40x40Quarter Round profiles usingCorner Connector 22-146and Connector Cap 18-821(p. 70)
3, 4 Connecting two 40x40Quarter Round profiles usingmiter cut and 90 miterconnector 20-128Z1 (p.62)
10-043
40 Series
-
120Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
40 Series
Profile 40-60 forhexagonalstructures
Profile 40-45 foroctagonalstructures
Profile 40x40x45 used in 45 Corner Elements(p.75) and with 40x40-45 Connector (p.70)
10-044
11-044
10-045
10-060
10-085
ApplicationProfiles 40x40-45 suitable for gusset applications or placing profiles at 45 anglewithin a structure. Profiles 40-45 and 40-60 can be used for polygonal shapedstructures. Profile, R40/80 are ideal for constructing cases, tables and angled bases
Technical DataAl, clear or black anodized
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
10-044 6.71 6.71 2.98 2.98 5.68 1.53 11-044 9.40 9.40 4.07 4.07 7.33 1.98 10-045 16.27 34.39 7.43 9.62 10.22 2.76 10-060 12.73 42.73 6.08 10.93 9.35 2.76
Description Unit Part #Clear Black
Profile 40x40-45 Standard cut off max. 6M 10-044 10-044Bpkg of 12 at 3M ea. 10-044-3 10-044B3pkg of 12 at 6M ea. 10-044-6 10-044B6
Profile 40x40-45 Heavy cut off max. 6M 11-044 11-044Bpkg of 9 at 3M ea. 11-044-3 11-044B3pkg of 9 at 6M ea. 11-044-6 11-044B6
Profile 40-45 cut off max. 6M 10-045pkg of 4 at 3M ea. 10-045-3pkg of 4 at 6M ea. 10-045-6
Profile 40-60 cut off max. 6M 10-060pkg of 4 at 3M ea. 10-060-3pkg of 4 at 6M ea. 10-060-6
Profile R40/80-30 cut off max. 6M 10-083Profile R40/80-45 cut off max. 6M 10-085Profile R40/80-60 cut off max. 6M 10-086Profile R40/80-90 cut off max. 6M 10-089
Saw cut necessary for cut to length 19-001
End Cap 40x40-45 1 pc 18-820End Cap 40-45 1 pc 18-845End Cap 40-60 1 pc 18-860
-
121
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
1 Profile 16x80 on Bearing Units 6
2 Profile 16x160 used for electronic mounting
3 Mounting element for Profile 16x40.See page 74.
ApplicationLight construction and support for such items as valves, limit switches, andheavy duty handle (see handles). Profile 16x80 can be used as baseplate on Bearing Units 6. Large surface area of the 16x160 with 8mm and 5mm T-slots provides convenient attachment of multiple accessories. Ideal as afixture plate for pneumatics, electrical valves and switches. Profile 16x160should not be used as a structural member.
Technical DataAl, clear or black anodized
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
10-016 6.97 1.06 3.49 1.23 4.33 1.17 10-081 50.76 2.15 12.69 2.69 8.13 2.20 10-161 287.1 3.66 35.89 4.10 12.78 3.45
Description Unit Part #Clear Black
Profile 16x40 cut off max. 6M 10-016 10-016Bpkg of 10 at 3M ea. 10-016-3 10-016B3pkg of 10 at 6M ea. 10-016-6 10-016B6
Profile 16x80 cut off max. 6M 10-081pkg of 10 at 3M ea. 10-081-3pkg of 10 at 6M ea. 10-081-6
Profile 16x160 cut off max. 6M 10-161pkg of 10 at 3M ea. 10-161-3pkg of 10 at 6M ea. 10-161-6
Saw cut necessary for cut to length on 16x40 & 16x80 19-001Saw cut necessary for cut to length on 16x160 19-003
End Cap 16x40 1 pc 18-811End Cap 16x80 1 pc 18-812
Profile 16x160 used in pneumatic training station(photo courtesy of National Technology Transfer,Inc.)
40 Series
1
2 3
10-016
10-081
10-161
-
122Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
ApplicationGeneral engineering structures, weight optimized. 10-080 and 11-080 are suitablefor construction of linear slides with IPS roller systems; they can also be used forcompressed air piping.Basic fasteners: Standard & Heavy profile: 20-002, 20-004, 20-006, 25-003, 25-004
Light profile: 20-014, 20-011, 20-012Technical DataAl, clear or black anodized
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
10-680 60.05 15.40 15.01 7.70 8.90 2.40 10-080 71.97 17.23 17.99 8.62 11.53 3.18 10-180 65.87 16.37 16.46 8.19 10.90 2.83 11-080 102.00 26.73 25.50 13.37 16.59 4.58
Description Unit Part #Clear Black
Profile 80x40 Light cut off max. 6M 10-680pkg of 8 at 3M ea. 10-680-3pkg of 8 at 6M ea. 10-680-6
Profile 80x40 Standard cut off max. 6M 10-080 10-080Bpkg of 8 at 3M ea. 10-080-3 10-080B3pkg of 8 at 6M ea. 10-080-6 10-080B6
Profile 80x40 Tri-Slot Corner cut off max. 6M 10-180 10-180Bpkg of 8 at 3M ea. 10-180-3 10-180B3pkg of 8 at 6M ea. 10-180-6 10-180B6
Profile 80x40 Heavy cut off max. 6M 11-080pkg of 8 at 3M ea. 11-080-3pkg of 8 at 6M ea. 11-080-6
Saw cut necessary for cut to length 19-001
End Cap 80x40 1 pc 18-814Secure End Cap 80x40 1 pc 18-914
40 Series
10-680
10-080
11-080
10-180
-
123
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
10-120 220.54 24.22 36.76 12.11 16.12 4.35 11-120 306.00 38.16 51.00 19.08 22.61 6.13 10-164 517.25 33.13 64.65 16.56 21.48 5.80 11-140 749.51 54.80 93.60 27.40 32.30 8.72
40 Series ApplicationSuitable as clamping and mounting surface (fixturing), vertical structural support,general heavy duty structures. Also used as header for bearing block assembliesfor Linear System 14 or 25. Suitable for multiple channel compressed air piping.
Technical DataAl, clear anodized
Description Unit Part #Profile 120x40 Standard cut off max. 6M10-120
pkg of 4 at 3M ea. 10-120-3 pkg of 4 at 6M ea. 10-120-6
Profile 120x40 Heavy cut off max. 6M11-120
Profile 160x40 Standard cut off max. 6M 10-164
Profile 160x40 Heavy cut off max. 6M 11-140 pkg of 4 at 3M ea. 11-140-3 pkg of 4 at 6M ea. 11-140-6
Saw cut necessary for cut to length 19-003
End Cap 120x40 1 pc 18-840End Cap 160x40 1 pc 18-817
10-164
11-140
10-120
11-120
-
124Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
11-100 190.29 30.84 38.06 15.42 17.88 4.94 11-128 73.11 20.45 91.51 14.36 31.33 8.46 11-084 129.37 129.37 27.94 27.94 23.23 6.27 11-124 498.1 498.1 66.2 66.2 40.3 10.9
40 SeriesApplication11-100 and 11-128: General engineering structures,heavy duty applications. 160x28 is suitable as clampingand mounting surface (fixturing) used as header for bearingblock assemblies for Linear System 14 or 25.11-084 and 11-124: General engineering structures with very high loads or widespans. Useful as load bearing corner or post. Suitable for multiple channelcompressed air piping.
Technical DataAl, clear anodized
11-100
11-128
11-12411-084
Description Unit Part #Profile 40x100 Heavy cut off max. 6M 11-100
pkg of 8 at 3M ea. 11-100-3pkg of 8 at 6M ea. 11-100-6
Saw cut necessary cut to length 19-002
Profile 160x28 Heavy cut off max. 6M 11-128pkg of 5 at 3M ea. 11-128-3pkg of 5 at 6M ea. 11-128-6
Saw cut necessary cut to length 19-003
Profile 80x80x40 Corner per meter 11-084Saw cut necessary cut to length 19-002
Profile 120x120x40 Corner per meter 11-124Saw cut necessary for cut to length 19-003
End Cap 40x100 1 pc 18-804End Cap 160x28 1 pc 18-816
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
-
125
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
10-088
ApplicationGeneral engineering structures, heavy duty applications. For construction oflinear slides with IPS roller systems, can also be used for compressed air piping.
Technical DataAl, clear or black anodized
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
10-088 138.30 138.30 34.58 34.58 20.17 5.45 11-088 186.89 186.89 46.72 46.72 26.35 7.11 10-122 421.67 201.95 68.34 50.49 30.15 8.14 11-122 575.07 274.46 92.75 68.61 40.08 10.82
Description Unit Part # Clear Black
Profile 80x80 Standard cut off max. 6M 10-088 10-088Bpkg of 4 at 3M ea. 10-088-3 10-088B3pkg of 4 at 6M ea. 10-088-6 10-088B6
Profile 80x80 Heavy cut off max. 6M 11-088pkg of 4 at 3M ea. 11-088-3pkg of 4 at 6M ea. 11-088-6
Saw cut necessary for cut to length 19-002
Profile 80x120 Standard cut off max. 6M 10-122pkg of 4 at 3M ea. 10-122-3
Profile 80x120 Heavy cut off max. 6M 11-122pkg of 4 at 3M ea. 11-122-3pkg of 4 at 6M ea. 11-122-6
Saw cut necessary for cut to length 19-003
End Cap 80x80 1 pc 18-815Secure End Cap 80x80 1 pc 18-915End Cap 80x120 1 pc 18-841
10-122
11-122
40 Series
11-088
-
126Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
ApplicationGeneral engineering structures with very high loads or wide spans. For constructionof guides and slides with the Linear System 14 and 25. Suitable for multiplechannel compressed air piping. The 11-089 center area of the profile can be usedto house electrical or air lines, or as a manifold for pressurized air (150 psimaximum). A support bearing can be pressed into the center diameter to holdshafts or spindles for rotary or linear motion.
Technical DataAl, clear anodized
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
10-160 922.50 271.10 115.30 67.80 38.10 10.29 11-160 1215.79 357.51 151.97 89.38 51.72 13.96 11-089 215.85 215.85 53.96 53.96 36.26 9.83
Description Unit Part #
Profile 160x80 Standard cut off max. 6M 10-160
Profile 160x80 Heavy cut off max. 6M 11-160 pkg of 2 at 3M ea. 11-160-3 pkg of 2 at 6M ea. 11-160-6
Profile 80x80 Extra Heavy cut off max. 6M 11-089
Saw cut necessary for cut to length 19-003
End Cap 160x80 1 pc 18-818
40 Series
10-160
11-160
11-089
-
127
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
10-036
11-056
10-550
10-580
Post Profiles
ApplicationProfile 36x36 fits in cavity of 56x56 profile to create telescoping post for workstations and tables.56x56 profile suitable as corner post for tables, frames and machine guarding.Hollow square interior accommodates door and access panel counterweights.50x50 and 50x80 profiles suitable as leg support for 50x95 Conveyor Profile.Use Standard Fastener 50 (20-051) and Flat Plate Fastener (20-028).
Technical DataAl, clear anodized
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
10-036 8.55 8.55 4.32 4.32 7.18 1.94 11-056 45.62 45.62 14.81 14.81 13.07 3.53 10-550 19.70 19.70 7.88 7.88 9.81 2.71 10-580 78.75 30.50 19.69 12.20 13.58 3.75
Description Unit Part #Profile 36x36 Post cut off max. 3M10-036
Profile 56x56 Post cut off max. 6M11-056 pkg of 4 at 3M ea. 11-056-3 pkg of 4 at 6M ea. 11-056-6
Profile 50x50 cut off max. 6M10-550 pkg of 9 at 3M ea. 10-550-3 pkg of 9 at 6M ea. 10-550-6
Profile 50x80 cut off max. 6M10-580 pkg of 6 at 3M ea. 10-580-3 pkg of 6 at 6M ea. 10-580-6
Saw cut necessary for cut to length 19-001
Secure End Cap 56x56 1 pc 18-919End Cap 50x50 1 pc 18-810
-
128Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
End Cap 45ApplicationFor covering exposed end of 45 seriesprofiles.
Technical DataGlass-filled nylon, black
45 Series Profiles ApplicationProfiles for general engineeringstructures. Widely used in automotiveindustry for constructing framework forassembly and conveyor lines.Compatible with all Bosch hardware.
Technical DataAl, clear anodized
14-045
14-090
14-040
14-046
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
14-040 11.23 11.23 4.99 4.99 5.69 1.54 14-045 15.81 15.81 7.03 7.03 8.25 2.23 14-046 17.30 28.52 7.69 9.51 8.88 2.40 14-090 32.20 124.40 14.31 27.64 15.25 4.12
Description Unit Part #Profile 45x45 Light cut off max. 6M 14-040
pkg of 16 at 3M ea. 14-040-3pkg of 16 at 6M ea. 14-040-6
Profile 45x45 cut off max. 6M 14-045pkg of 16 at 3M ea. 14-045-3pkg of 16 zt 6M ea. 14-045-6
Profile 45x60 Light cut off max. 6M 14-046
Profile 45x90 cut off max. 6M 14-090pkg of 8 at 3M ea. 14-090-3pkg of 8 at 6M ea. 14-090-6
Saw cut necessary for cut to length 19-001
Description Unit Weight Part #End Cap 45x45 1 pc 9 g 17-813End Cap 45x90 1 pc 18 g 17-814End Cap 45x60 1 pc 11 g 17-815
-
129
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
30, 28 and 20Series Profiles
30, 28 and 20 series T-slots are smaller than 40 series T-slots requiringdifferent hardware. All hardware designed for use with 30, 28 or 20 seriesprofiles are designated with the appropriate series number at the end of thedescription.
Inventory Cart
Printer Stand
Safety Guards and Partitions
Mobil Parts Bin Rack
-
130Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
30 Series Profiles
1 2 3
ApplicationFor general structures, safety guard and partition frames, light duty enclosuresand industrial peripherals.
Technical DataAl, clear or black anodized
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
12-030 3.13 3.13 2.09 2.09 3.31 0.90 12-033 2.71 2.71 1.70 1.70 3.26 0.88 12-034 3.49 3.49 2.22 2.22 3.68 0.99 12-060 6.0 21.1 4.01 7.04 6.10 1.65 12-066 39.0 39.0 13.0 13.0 9.61 2.60Description Unit Part #
Clear BlackProfile 30x30 cut off max. 6M 12-030
pkg of 16 at 3M ea. 12-030-3pkg of 16 at 6M ea. 12-030-6
Profile 30x30 Quarter Round cut off max. 6M 12-033 12-033B
Profile 30x30 Bi-Slot Corner cut off max. 6M 12-034
Profile 30x60 cut off max. 6M 12-060pkg of 8 at 3M ea. 12-060-3pkg of 8 at 6M ea. 12-060-6
Profile 60x60 cut off max. 6M 12-066pkg of 4 at 3M ea. 12-066-3pkg of 4 at 6M ea. 12-066-6
Saw cut necessary for cut to length 19-001
End Cap 30x30 1 pc 18-803End Cap 30x60 1 pc 18-863End Cap 60x60 1 pc 18-866
54
1-2 Servicing for Standard Fastener 28/30 (20-003)
3 Servicing for Universal Fastener 30(20-008) and for Butt-Fastener M6 (20-012)
4 Connecting three 30x30 Quarter Roundprofiles using Corner Connector 30 (22-150)and Radius Connector Cap 30 (22-151)
5 Corner connector 30 (see page 70)
12-066
12-030
12-033
12-034
12-060
-
131
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
28 Series Profiles
1 32
ApplicationSafety guard and partition frames, light duty enclosures and industrial peripheralssuch as parts racks, etc. Also suitable for interior design and other commercialapplications.Technical DataAl, clear or black anodized
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
12-028 2.41 2.41 1.72 1.72 3.01 0.81 12-044 2.00 2.00 1.30 1.30 2.89 0.78 12-128 2.69 2.41 1.82 1.72 3.18 0.86 12-228 2.71 2.71 1.84 1.84 3.37 0.91 12-328 3.02 2.43 2.16 1.73 3.37 0.91
Description Unit Part #Clear Black
Profile 28x28 Quad-Slot cut off max. 6M 12-028 12-028Bpkg of 25 at 3M ea. 12-028-3 12-028B3pkg of 25 at 6M ea. 12-028-6 12-028B6
Profile 28x28-45 cut off max 6M 12-044 12-044Bpkg of 25 at 3M ea. 12-044-3 12-044B3pkg of 25 at 6M ea. 12-044-6 12-044B6
Profile 28x28 Tri-Slot cut off max. 6M 12-128 12-128Bpkg of 25 at 3M ea. 12-128-3 12-128B3pkg of 25 at 6M ea. 12-128-6 12-128B6
Profile 28x28 Bi-Slot Corner cut off max. 6M 12-228 12-228Bpkg of 25 at 3M ea. 12-228-3 12-228B3pkg of 25 at 6M ea. 12-228-6 12-228B6
Profile 28x28 Bi-Slot Midframe cut off max. 6M 12-328 12-328Bpkg of 25 at 3M ea. 12-328-3 12-328B3pkg of 25 at 6M ea. 12-328-6 12-328B6
Saw cut necessary for cut to length 19-001
End Cap 28x28 1 pc 18-808End Cap 28x28-45 1 pc 18-844
1-2 Servicing for Standard Fastener 28 (20-003)
12-028
12-044
12-128
12-228
12-328
-
132Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
28 Series ApplicationSafety guard and partition frames, light duty enclosures and industrial peripheralssuch as parts racks, etc. Also suitable for interior design and other commercialapplications.
Technical DataAl, clear or black anodized
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
12-428 16.56 4.67 5.91 3.33 5.66 1.53 12-528 18.61 5.28 6.46 3.57 6.21 1.68 12-628 18.05 5.92 6.44 4.23 6.39 1.73 12-728 17.30 5.26 6.18 3.55 6.03 1.63
Description Unit Part #Clear Black
Profile 28x56 Open-Slot cut off max. 6M 12-428 12-428Bpkg of 8 at 3M ea. 12-428-3 12-428B3pkg of 8 at 6M ea. 12-428-6 12-428B6
Profile 28x56 Tri-Slot cut off max. 6M 12-528 12-528Bpkg of 8 at 3M ea. 12-528-3 12-528B3pkg of 8 at 6M ea. 12-528-6 12-528B6
Profile 28x56 Bi-Slot cut off max. 6M 12-628 12-628Bpkg of 8 at 3M ea. 12-628-3 12-628B3pkg of 8 at 6M ea. 12-628-6 12-628B6
Profile 28x56 Quad-Slot cut off max. 6M 12-728 12-728Bpkg of 8 at 3M ea. 12-728-3 12-728B3pkg of 8 at 6M ea. 12-728-6 12-728B6
Saw cut necessary for cut to length 19-001
End Cap 28x56 1 pc 18-809
12-428
12-528
12-628
12-728
-
133
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
ApplicationSafety guard and partition frames, light duty enclosures and industrial peripheralssuch as tool hangers, etc. Also suitable for interior design and other commercialapplications.
Technical DataAl, clear
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
12-043 2.71 2.71 1.84 1.84 3.49 0.95 10-056 29.55 29.55 14.78 14.78 8.51 2.31
Description Unit Part #
ClearProfile 28x28 Qtr Round cut off max. 6M 12-043
Profile 28x28 Tool Hanger cut off max. 6M 12-828 Light
Profile 56x56 Light cut off max. 6M 10-056
Saw cut necessary for cut to length 19-001
10-056
12-043
12-828
28 Series
-
134Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
12-020
20 Series Profiles
12-120
12-124
12-040
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
12-120 0.12 0.53 0.24 0.53 1.29 0.35 12-020 0.72 0.72 0.72 0.72 1.85 0.52 12-124 1.27 5.01 1.27 2.50 3.18 0.86 12-040 8.55 8.55 4.27 4.27 4.90 1.32 12-126 2.04 16.02 2.04 5.34 4.73 1.28 12-125 2.70 36.40 2.70 9.10 6.19 1.67 12-081 1.14 41.01 1.57 10.25 6.65 1.80
Description Unit Part #Profile 20x10 cut off max. 3M 12-120
pkg of 32 at 3M ea. 12-120-3
Profile 20x20 cut off max. 3M 12-020pkg of 32 at 3M ea. 12-020-3
Profile 20x40 cut off max. 3M 12-124pkg of 16 at 3M ea. 12-124-3
Profile 40x40, 20 Series cut off max. 3M 12-040pkg of 8 at 3M ea. 12-040-3
Profile 20x60 cut off max. 3M 12-126
Profile 20x80 cut off max. 3M 12-125
Profile 80x14 cut off max. 3M 12-081
Saw cut necessary for cut to length 19-001
End Cap 20x10 1 pc 18-830End Cap 20x20 1 pc 18-802End Cap 20x40 1 pc 18-831End Cap 40x40, 20 Series 1 pc 18-832End Cap 20x60 1 pc 18-834End Cap 20x80 1 pc 18-835End Cap 80x14 1 pc 18-833
1 2 3
12-081
12-126
12-125
1-2 Servicing for Std. Fastener 20 (20-021)3 Servicing for Univ. Fastener 20 (20-040)
Application20 series profiles can be used for lightduty enclosures and miniaturemodeling. Also useful as an accessoryextrusion where small profiles areneeded. 5mm T-slot requires 20series hardware.
Technical DataAl, clear anodized
-
135
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
40x40 Clamp Profile
10-041
10-042
10-011
Guarding and Enclosure Application Profiles
Application40x 40 clamp profiles suitable for construction of guards, enclosures, swingingand sliding doors. Accommodates corrugated mesh, sheet metal and plasticpanels up to 9.5 mm thick. Clamped panel adds rigidity to the frame. Bi-clampprofile designed for use as inner post in subdivided panels of large guarding,sliding and swinging doors. Clamp profiles are serviced for screws on 200 2mm centers. Shipped complete with clamping strip (10-011) and M6x16 SHCS.In addition to being a part of 40x40 clamp profiles, edging profile can also beused as a handle or stiffener for panels.
Technical DataAl, clear anodized
Part # IX IY WX WY Section Weight[cm4] [cm4] [cm3] [cm3] [cm2] [kg/m]
10-041 11.40 11.40 5.55 5.55 7.40 2.30 10-042 13.00 11.40 6.20 5.70 8.38 2.26 10-011 0.30
Description Unit Part #Profile 40x40 Clamp cut off max. 6M 10-041
pkg of 16 at 3M ea. 10-041-3pkg of 16 at 6M ea. 10-041-6
Profile 40x40 Bi-Clamp cut off max. 6M 10-042
Edging Profile cut off max. 6M 10-011pkg of 10 at 3M ea. 10-011-3pkg of 10 at 6M ea. 10-011-6
Saw cut necessary for cut to length 19-001
End Cap 40x40 1 pc 18-813Secure End Cap 40x40 1 pc 18-913
2
1 3
4
1 Proper assembly of bi-clamp profile2 Recommended penetration of the panels into the clamp profiles3-4 Application examples5 Edging profile used as door handle on sliding door
5
-
136Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
32x18 PictureFrame Profile
1 Profile 32x18 Mono-slot mitre cut at 45used on a framed door
2 Assembly of 90 Mitre Connector MD(order Mitre Bracket and set screwseparately)
3 Panel dimensions
1
2
3
12-031
20-128Z1
12-108
12-023
ApplicationPicture frame guarding andenclosures. Accepts panel 10mm (3/8) thick without using gasket, 6mm(1/4) thick with Panel Gasket 10 (12-108). Recess for magnetic or foam tapeto provide tight seal for noise or dustprotection. Easy assembly with 90Mitre Connector MD (20-128Z1).
Description Unit Part #Profile 32x18 Mono-Slot cut off max. 6m 12-031Profile 22x32 Light cut off max. 6m 12-032Profile 32X22 Slot 12-023
Saw cut necessary for cut to length 19-001
Panel Gasket 10 cut off max. 125m 12-10890 Mitre Connector MD 1 pc 20-128Z1Mitre Bracket 1 pc 20-127
Technical DataAl, clear anodizedWeight 0.94 kg/m
Loctite Thread Locker No. 262recommended to secure setscrews.
End cap 18-807 can not be used withthis profile.
-
137
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
3
Profile 32x18 Bi-Slot
Description Unit Part #Profile 32x18 Bi-Slot cut off max. 6M 12-032
pkg of 10 at 3M ea. 12-032-3 pkg of 10 at 6M ea. 12-032-6
Saw cut necessary for cut to length 19-001
End Cap 32x18 1 pc 18-807Fastening Set for 32x18 Bi-Slot Pfl 1 set 20-132Clamp Spring 1 pc 22-032
Technical DataAl, clear anodizedWeight 0.67 kg/m
Fastening Set: St, galvanizedWeight 9g
Clamp Spring: StWeight 4g
ApplicationSuitable for guarding, sliding doorsand enclosures. Panel up to 9mm thickmay be clamped using clamp spring.Number of clamps depends on panelsize and load. Panel gaskets 12-106and 12-108 can be used to secure6mm (1/4) panel in T-slots.
12-032
20-132
1 Assembly of panel frame using Profiles32x18 Bi-slot for use on Rolling DoorGuide Profile (12-022)
2 Frame for panels 8mm thick withoutgasket or 6mm thick with Panel Gasket 8(12-106)
3 Milling of 8mm slot is required forFastener (20-132) when using 8mmslot for panels.
4 Frame for holding panels with Clamp Spring(22-032) or Panel Gasket 10 (12-108).
2
4
22-032
-
138Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
21-067
12-022
21-068
Rolling Door Guide
ApplicationExcellent solution for large doors with removable door panels for maintenance.Example: case packers, material handling and packaging installations,enclosures for large machinery.
Description Unit Part #Rolling Door Guide Profile cut off max. 4M 12-022Saw cut necessary for cut to length 19-001
Guide Insert Set 1 set 21-067Roller Insert Set 1 set 21-068UHMW Guide Profile cut off max 3.1M 12-421
1 Length of vertical door frame member: B = A - 112 mm.For 6mm panel with panel gasket 8 (12-106): C (panel height)= B + 16 mm.For 8mm panel without gasket: C (panel height) = B + 23 mm
2-3 Connection methods for assembling the Door Guide to 40 series profiles4 Attaching the 32x18 framed door to the Door Guide Profile. Mitre connection of 32x18
Bi-Slot profile (12-032) for door frame is NOT recommended. See page 23 for detail of doorframe.
1
3
42
12-421
Technical DataProfile: Al, clear anodized. Weight 1.78 kg/mGuide Insert: Roller Insert: UHMW, white Roller: Delrin, black with M6x16 Flat point set screw Housing: Al, anodized Weight 45 g Pin: Stainless Steel
-
139
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
12-014
12-015
Sliding Door Guide
12-012
12-013
Application
To guide light duty panels as slidingwindows and access ports for safetyguards and enclosures. Installationonto 40, 30 or 28 Series profiles isaccomplished without fasteners bysnapping into T-slot. Design of lowerguide reduces friction of sliding panels.Design of upper guide facilitates easy,lift-out removal of door withoutdisassembly of structure.
Description Unit Part #Sliding Door Guide 40, Upper cut off max. 3M 12-012
pkg of 10 at 3M ea. 12-012-3
Sliding Door Guide 40, Lower cut off max. 3M 12-013pkg of 10 at 3M ea. 12-013-3
Sliding Door Guide 30/28, Upper cut off max. 3M 12-014pkg of 10 at 3M ea. 12-014-3
Sliding Door Guide 30/28, Lower cut off max. 3M 12-015pkg of 10 at 3M ea. 12-015-3
Saw cut necessary for cut to length 19-001
40 Series
28/30 Series
ApplicationDesigned as a combination handle andstiffener for sliding panel doors 1/4 thick.Panels snap into the profile slot and maybe additionally secured by an adhesiveor fastener.
Description Unit Part #Stiffener/Handle Profile cut off max. 3M 12-011
pkg of 10 at 3M ea. 12-011-3
Saw cut necessary for cut to length 19-001
Technical DataAl, clear anodizedWeight 0.93 kg/m
Stiffener/Handle Profile
B = A - 15mm for removable doorsB = A - 10mm for non-removable doors
Technical Data
Al, clear anodizedThree tracks for panels up to 6.4mm(1/4") thickWeight: 12-012, 12-014 0.45 kg/m 12-013, 12-015 0.50 kg/m
-
140Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
Panel HolderApplicationProfile designed for panels 3- 6mm thick.Built-in seal for splash guard applications.Can be used for 40, 30 and 28 seriesprofiles.
Technical DataRigid PVC base, with vinyl lip sealWeight 0.16 kg/m
Description Unit Color Part #Panel Holder Profile cut off max. 3M black 12-016B
cut off max. 3M gray 12-016GSaw cut necessary for cut to length 19-001
Mesh Clamp
ApplicationCaptures wire mesh panel up to 5.5mmthick. Excellent for constructing safetyguards when mesh needs not beremovable. Installation onto 40, 30 or28 series profiles is accomplishedwithout fasteners by pressing into T-slot. Support stanchion becomesintegral part of panel frame.
Technical DataAl, clear anodizedProfile is tapped M6 every 200mm 2mm. Includes clamp strip and M6x6flat point set screws.Weight 0.53 kg/m
Description Unit Part #Mesh Clamp Profile cut off max. 4M 12-010
pkg of 10 at 4M ea. 12-010-4Saw cut necessary for cut to length 19-001
Panel Extrusion 40
Description Unit Part #Panel Extrusion 40 cut off max. 6M 12-018Saw cut necessary for cut to length 19-001
ApplicationExtrusion for mounting 34mm (1.34")thick insulation panels onto 40 seriesprofiles. Extrusion can be servicedto mount on profile using T-slot nuts.Can also be mounted with doublesided tape.
Technical DataAl, clear anodizedWeight 0.48 kg/m
Position for clearance of Std. Fastener
Wire Mesh Size: A x B less 6 to 10 mm
Length = A- 1 mm
Length = B - 33mm
-
141
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
Rack Angle
Description Unit Part #Clip Nut M5* 1 pc 20-075Clip Nut M6 1 pc 20-076
Technical DataSt, zinc platedWeight 5g
* Due to almost identical geometric anddimensionsal shape of M5 and #10-32 UNFthreads, standard #10-32 screws will fit in M5 ClipNut.
ApplicationSquare nut with clip attachment for 19"Rack Angle. Nut snaps into squareholes for attaching panels and acces-sories.
Technical DataAl, clear anodizedComplete with M6x12 flat point setscrews.
Weight:12-109M 0.62 kg/m12-110M 0.63 kg/m
ApplicationUsed for attaching standard 19" rackor other panel to 40 series profile(30 and 28 series profiles permited,rack angle must be inserted fromprofile end). Clip nuts for panelmount snap into square holes.Blank Rack Angle can be machinedto mount any accessories (see 1/4Turn Receptacle).
1
32
54
Description Unit Part #19" Rack Angle cut off max. 2.048M 12-109MRack Angle, Blank cut off max. 2.048M 12-110MSaw cut necessary for cut to length 19-001
(19)
12-110M
12-109M
Clip Nut
27
67
10.550.5
1 Mounting dimensions2 Inserting rack angle into 40 series T-slot3 Rack Angle is secured in T-slot with set
screw M6x124 Panel is attached to Rack Angle with M5 or
M6 screw and clip nut5 Non-removable panels can be attached to
the blank Rack Angle with double-sidedtape
-
142Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
Description Unit Part #Clamp Bar Profile cut off max. 2M 12-105Saw cut necessary for cut to length 19-001
ApplicationFor attachment of 40 series profiles tobase plates and other parts. Must beused in pairs to accomplish properclamping of the profile. Notrecommended for use on linearapplications.
Technical DataAl, clear anodizedWeight 1.24 kg/m
Clamp Bar
Description Unit Part #L-Bracket Profile cut off max. 3M 21-057Z4Saw cut necessary for cut to length 19-002
L-Bracket Profile
ApplicationCan be cut and machined for customfloor mounting or other types ofbrackets. Anodizing on request. Forstandard floor mounting brackets seepage 82.
Technical DataAl, mill finishWeight 7.52 kg/m
Description Unit Part #Gusset Profile cut off max.3M 20-102Z4Saw cut necessary for cut to length 19-002
Gusset Profile
ApplicationCan be cut and machined for customgussets and support structures.Anodizing on request. For standardgusset brackets see page 74.
Technical DataAl, mill finishWeight 4.84 kg/m
-
143
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
12- 410
Description Unit Part #UHMW Slide Bar 40x40 cut off max. 3M 12-400
UHMW Slide Bar 40x10 cut off max. 3M 12-420UHMW Slide Bar 40x10, Antistatic cut off max. 3M 12-420B
UHMW Slide Bar 28/30x8 cut off max. 3M 12-430
UHMW Slide Strip cut off max. 3M 12-410
Saw cut necessary for cut to length 19-001
UHMW Slide Bar
UHMW slide bar 28/30 between two profiles UHMW slide strip on a parallel application
ApplicationDurable, low-friction material, self-lubricating and easily machined.Provides a smooth gliding surfaceon a wide range of applications,from linear systems to adjustablework surfaces.Use Slides Bars 12-400 and 12-420 for40 series profiles, 12-430 for 28 and30 profiles. Slide Strip 12-410 can beused with all 40, 30 and 28 seriesprofiles.
Technical DataUHMW, whiteUHMW, black antistatic (12-420B)
12- 430
12- 420
12- 400
-
144Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
12-106M
ApplicationPanel gasket fits 6mm panels. Meshgasket for 12 Gage wire mesh. Bothfor use on 40, 30 and 28 series pro-files.
Panel & Mesh Gaskets 8
Description Unit Part #Anti-Skid Cover 40 cut off max. 20M 12-114
Anti-Skid Cover Technical DataRubber, blackHardness 80 shoreWeight 180 g/m
Description Unit Part #Panel Gasket 8 cut off max. 30.5M 12-106M
30.5m roll 12-106R
Mesh Gasket 8 cut off max. 30.5M 12-107M30.5m roll 12-107R
12-106 12-107
ApplicationCover for 40 series profiles only, is usedfor non-slip surfaces such as laddersand stops for sliding doors. Oil and wa-ter resistant.
Technical DataMolded vinyl, greyWeight 40 g/m
Description Unit Part #Vinyl Panel Gasket 10 cut off max. 125m 12-108
Panel Gasket 10
Technical DataClear vinylWeight 90 g/m
ApplicationFlexible vinyl gasket for use in 10mmT-slots of 32x18 profiles and 45series profiles. Holds 6mm (1/4")panels.
12-031 12-032 45 seriesprofile
Safety CoverApplicationFor caution areas of 40, 30 or 28 seriesguards and enclosures.
Technical DataRigid PVC, yellowWeight 0.3 kg
Description Unit Part #Safety Cover Strip 1 pc at 3M 12-112
12-107M
-
145
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
T-Slot Cover
1 2
Technical DataCover/gasket: Polypropylene, semi-clear, black or yellow
PVC cover, black or blue
Aluminum cover, clear or black anodized
3
1 Entire T-slot cross section can beutilized as a raceway for wiring andpiping
2 Aluminum cover strip is easily cutoff with tin snips. See services and tools
3 Engraved information plates can be madefrom segments
4 Cover/gasket strip used as a T-slot cover
5 Cover/gasket strip used as a gasket
ApplicationDust-tight covers and gaskets for allIPS profiles. Covers provide flushsurfaces, making the entire T-slotavailable as conduit for wiring andpiping. Aluminium covers are easilyengraved.
12-101
12-102
Description Unit Weight Color Part #Cover/Gasket Strip 40 1 pc at 2M 52 g clear 12-101
black 12-101Byellow 12-101Y
Cover/Gasket Strip 28 1 pc at 2M 33 g clear 12-103black 12-103Byellow 12-103Y
Cover/Gasket Strip 20 1 pc at 2M 27 g clear 12-115black 12-115B
PVC Cover Strip 40 1 pc at 2M 44 g black 12-111Bblue 12-111BL
PVC Cover Strip 30/28 1 pc at 2M 27 g black 12-116B
PVC Cover Strip 45 1 pc at 2M 59 g black 17-111B
Aluminum Cover Strip 40 1 pc at 2M 50 g clear 12-102black 12-102B
Aluminium Cover Strip 30/28 1 pc at 2M 35 g clear 12-104black 12-104B
12-103
12-115
12-104
17-111B
12-116B
Inquire about quantity discounts
12-111B
a= max 1.5-2mm (20 series)a= 4-6mm (40 series)a= 6mm (28,30 series)
4 5
-
146Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
End Caps ApplicationFor covering the ends of profiles afterapplication assembly.
Technical DataGlass-filled nylon, black
Description (Size AxB) Unit Weight (g) Part #40 Series
40x40 1 pc 7 18-81340x40 Heavy Square 1 pc 10 18-80540x40 Quarter Round 1 pc 18-84380x40 1 pc 15 18-81440x100 1 pc 20 18-80480x80 1 pc 28 18-81540x120 1 pc 22 18-84080x120 1 pc 43 18-84116x40 1 pc 4 18-81116x80 1 pc 6 18-81216x160 1 pc 10 18-806160x28 1 pc 20 18-816160x40 1 pc 28 18-817160x80 1 pc 66 18-81840x40-45 1 pc 6 18-82040-45 1 pc 18-84540-60 1 pc 18-86050x50 1 pc 10 18-810
30 Series30x30 1 pc 18-80330x60 1 pc 18-86360x60 1 pc 18-866
28 Series28x28 1 pc 4 18-80828x56 1 pc 8 18-80928x28-45o 1 pc 18-844
20 Series20x10 1 pc 0.5 18-83020x20 1 pc 1 18-80220x40 1 pc 2 18-83140x40, 20 series 1 pc 4 18-83220x60 1 pc 3 18-83420x80 1 pc 4 18-83580x14 1 pc 3 18-8337mm Access Hole Plug 1 pc 18-710
See Conduit section for Conduit Caps
ApplicationUsed for covering the ends of profiles.End cap can be additionally securedwith M4x12 flat head screw (orderseparately) and can be re-used afterscrew removed. No profile servicing isrequired.
Technical DataGlass-filled nylon, blackScrew - St., black oxide
Secure End Cap
Description Unit Weight Part #Secure End Cap 40x40 1 pc 7 g 18-913Secure End Cap 40x80 1 pc 23 g 18-914Secure End Cap 80x80 1 pc 26 g 18-915Secure End Cap 56x56 1 pc 18-919M4x12 Flat Head Cap Screw pkg of 100 24-212-4
40, 30 & 28 Series 20 Series
-
147
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
Modular Dimensions
Conduit Elements The conduit elements for cable and hoseinstallation offer great variety and arequickly and easily assembled. Anodizedaluminum profiles provide rigidity withlow weight. The elements are in the40mm modular dimension and are fullycompatible with all other standardelements.
The conduit elements are resistant totwisting; which is very important in acantilevered application. They may beintegrated into the construction as astructural support.
The conduit is made up of high tensilestrength aluminum elements:y Wall duct profile 40, 80 and 120y Conduit support profile 40, 80, 120 and 160 (with or without T-slot)
Assembly ofConduit Elements
Wall duct profiles of any required lengthare snapped into a support profile.Another support profile closes the ductwith a "snap in" fit. The conduit may besecured with screws where necessary.
1 Scored groove forlocating locking screw(24-695) in Support Pro-file.
2 Locking screw turnedinto the pre-extrudedthreads of the supportwall profiles.
1
2
-
148Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
Assembly ofConduit Elements
1 May be attached to anyIPS profile using standardT-slot fastening methodssuch as the T-slot nuts
2-3 Scored groovessimplify locating of anynecessary holes
4 The cable duct may beopened with a screw driver
5 Wall segments with orwithout predrilled holes canbe provided
6 The conduit cross-section may be reduced orenlarged for customizedapplications
7 Conduits are lengthenedby overlapping (staggering)support and wall profiles
8 Openings may beproduced by sliding theprofiles
9-10 Switch box made ofconduit elements
9 10
8
7
6
5
1 4
32
-
149
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
ApplicationExamples
4
1 Transfer systeminstallation with conduitelements
2 Cable exits in wallsegment 160x80
3 Distribution panelconstructed of conduit80x80
4 Pneumatic controlsystem with separateinstallation of cables andhoses with conduits80x40
5 Assembly of conduitelements mitered at 45
31
2
5
-
150Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
Cross SectionsConduits without T-slots1 40x402 40x803 40x1204 40x1605 80x406 80x807 80x1208 80x1609 80x80-4510 120x4011 120x8012 120x12013 120x16014 80x160-20
Conduits with T-slots on one side15 40x4016 40x8017 40x12018 40x16019 80x4020 80x8021 80x12022 80x16023 80x80-4524 120x4025 120x8026 120x12027 120x16028 80x160-20
Conduits with T-slots on both sides29 80x8030 80x12031 80x16032 120x8033 120x12034 120x160
Conduits with Partitions35 40x8036 40x12037 40x16038 80x8039 80x12040 80x16041 120x8042 120x12043 120x160
16 17 18
24 25
20 21 22 23
26 27 28
29 30 31
32 33 34
1
5
10
2 3 4
6 7 8 9
11 12 13 14
15
19
35 3736
38 4039
41 42 43
-
151
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
Conduit Support
Transparent Cover ApplicationTransparent cover profiles for conduitelements designed for easy viewing ofconduit contents. Snaps into placewith standard conduit elements.
15-046
ApplicationBottom or cover element for conduitassemblies.
15-040 15-080
15-16015-120
15-086
Technical DataAl, clear anodizedWeight, kg/m
15-040 0.4915-080 0.7615-120 0.9815-160 1.25
Description Unit Part #Support Profile 40 cut off max. 6M 15-040
pkg of 10 at 3M ea. 15-040-3pkg of 10 at 6M ea. 15-040-6
Saw cut necessary for cut to length 19-001
Support Profile 80 cut off max. 6M 15-080pkg of 10 at 3M ea. 15-080-3pkg of 10 at 6M ea. 15-080-6
Saw cut necessary for cut to length 19-001
Support Profile 120 cut off max. 6M 15-120pkg of 10 at 3M ea. 15-120-3pkg of 10 at 6M ea. 15-120-6
Saw cut necessary for cut to length 19-002
Support Profile 160 cut off max. 6M 15-160pkg of 10 at 3M ea. 15-160-3pkg of 10 at 6M ea. 15-160-6
Saw cut necessary for cut to length 19-002
Technical DataPlastic, clearWeight, kg/m
15-046 0.1515-086 0.24
Description Unit Part #Transparent Cover Profile 40 cut off max. 3M 15-046
pkg of 10 at 3M ea. 15-046-3
Transparent Cover Profile 80 cut off max. 3M 15-086pkg of 10 at 3M ea. 15-086-3
Saw cut necessary for cut to length 19-001
-
152Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
Conduit Supportwith T-Slot
Description Unit Part #Support Profile 40 w/ T-slot cut off max. 6M 15-041
pkg of 10 at 3M ea. 15-041-3pkg of 10 at 6M ea. 15-041-6
Saw cut necessary for cut to length 19-001
Support Profile 80 w/ T-slot cut off max. 6M 15-081pkg of 10 at 3M ea. 15-081-3pkg of 10 at 6M ea. 15-081-6
Saw cut necessary for cut to length 19-001
Support Profile 120 w/T-slot cut off max. 6M 15-121pkg of 10 at 3M ea. 15-121-3pkg of 10 at 6M ea. 15-121-6
Saw cut necessary for cut to length 19-002
Support Profile 160 w/T-slot cut off max. 6M 15-161pkg of 10 at 3M ea. 15-161-3pkg of 10 at 6M ea. 15-161-6
Saw cut necessary for cut to length 19-002
15-08115-041
Description Unit Part #TS35 DIN Rail Profile cut off max. 6M 15-083
pkg of 10 at 3M ea. 15-083-3pkg of 10 at 6M ea. 15-083-6
Saw cut necessary for cut to length 19-001
TS35 DIN Rail
ApplicationRail for mounting terminal blocks andcircuit breakers. Snaps into place onConduit Support Profile w/ T-slots 80,120 and 160.
Technical DataAl, clear anodizedWeight 0.25 kg/m
15-121 15-161
Locking screw (24-695) optional
Technical DataAl, clear anodizedWeight, kg/m 15-041 0.60 15-081 1.32 15-121 1.68 15-161 2.29
ApplicationBottom or cover element for conduitassemblies. T-Slots accept all 40series hardware.
15-083
-
153
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
ApplicationUsed for sides of conduit and as adivider for separating interior channels.
Wall Duct Profile
Angled Support
ApplicationCover element for conduit assemblies.Snaps into place with duct wall supportprofile 80. Attractive and suitable tobuild consoles and control boxes.
Technical DataAl, clear anodizedWeight, kg/m 15-085 1.03 15-162 1.20
Description Unit Part #Support Profile 80x80-45 cut off max. 6M 15-085
pkg of 10 at 3M ea. 15-085-3pkg of 10 at 6M ea. 15-085-6
Support Profile 160-20 cut off max. 6M 15-162pkg of 10 at 3M ea. 15-162-3pkg of 10 at 6M ea. 15-162-6
Saw cut necessary for cut to length 19-002
15-042
15-082 15-122
15-162
15-085
Technical DataAl, clear anodizedWeight, kg/m 15-042 0.21 15-082 0.55 15-122 0.81
Description Unit Part #Wall Duct Profile 40 cut off max. 6M 15-042
pkg of 10 at 3M ea. 15-042-3pkg of 10 at 6M ea. 15-042-6
Wall Duct Profile 80 cut off max. 6M 15-082pkg of 10 at 3M ea. 15-082-3pkg of 10 at 6M ea. 15-082-6
Wall Duct Profile 120 cut off max. 6M 15-122pkg of 10 at 3M ea. 15-122-3pkg of 10 at 6M ea. 15-122-6
Saw cut necessary for cut to length 19-001
-
154Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston, TX 77066
5
Catalog 1816Profiles
IPSINDUSTRIAL PROFILE SYSTEMS800-333-4932
Conduit Caps
Technical DataGlass-filled nylon, black
ApplicationFace covering for sealing the endopenings of Conduit Systems. Not foruse on 40 series profiles.
Description (AxB) Unit Weight (g) Part #Conduit Cap 40x40 1 pc 8 15-803
80x40 1 pc 14 15-80480x80 1 pc 30 15-80540x120 1 pc 30 15-81080x120 1 pc 50 15-811120x120 1 pc 70 15-812120x160 1 pc 90 15-813160x40 1 pc 30 15-806160x80 1 pc 58 15-80780x80-45 set of 2, R/L 50 15-808160x80-20 set of 2, R/L 100 15-809
Recommended location of 5mm hole for lockingscrew on custom conduit caps (note orientation)
-
155
5
IPSINDUSTRIAL PROFILE SYSTEMS
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, TX 77066
800-333-4932Catalog 1816Profiles
Locking Screw
ApplicationLocking screw for conduit assembliesand conduit caps. The screw breaksanodized coating and establishes apositive ground between the profiles
Technical DataSt, galvanized4.2 x 9.5mm, DIN 7971Weight 2 g
Description Unit Part #Locking Screw 4.2 x 9.5 1 pc 24-695
-
256Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston , TX 77066
HardwareCatalog 1816
800-333-4932IPSINDUSTRIAL PROFILE SYSTEMS
40 Series Standardwith T-slot Nut
40 Series Heavywith T-Nut HD
40 Series Heavywith T-slot Nut
2,500 N(560 lbs)
8,000 N(1,800 lbs)
5,000 N(1,125 lbs)
Two pieces of 40x40 Heavy profile were assembled to form a tee with a standardfastener and a button head screw. Force was applied until the tee started toseparate. The profile failed before the fastener. The profiles were still held to-gether at the end of the test. There were no catastrophic failures. Extra screwlength beyond standard 20mm did not significantly change test results.
Pull Test
Safe Load
Hardware and Fastening Components
Engaged ForceScrew length N LbsM8x20 15 mm 24,954 5,609M8x25 20 mm 25,354 5,699M8x30 25 mm 26,777 6,019
-
22
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, Tx 7706657
800-333-4932 IPSINDUSTRIAL PROFILE SYSTEMS
Catalog 1816Hardware
THREAD SIZE FOR PROFILE SERIES40 30 28 20
Standard Fastener M 5 20-021M 8 20-002, 20-002SS 20-003, 20-003SS5/16-18 25-003
Universal Fastener M 4 20-040M 6 20-008 20-005 1M 8 20-0045/16-18 25-004
T-Slot Nut, St M 4 20-044M 5 (#10-32) 4 20-052 20-052 20-045M 6 20-056, 20-056SS 20-056, 20-056SS 20-055 1M 8 20-058, 20-058SS 20-058, 20-058SS 20-057 11/4-20 25-001 25-0015/16-18 25-002 25-002
Double T-Slot Nut M 8, A=24 20-049 20-049M 8, A=40 20-050 20-050
HD T-Slot Nut 1,2 M 6 20-060M 8 20-064
Double HD T-Slot Nut 1 M 8 20-063
Economy T-Slot Nut 1,3 M 4 20-084M 5 (#10-32) 4 20-085M 6 20-080 20-090 20-090M 8 20-081, 20-081SS 20-091 20-0911/4-20 20-083 20-093 20-0935/16-18 20-082 20-092 20-092
Offset Economy T-Slot Nut 1,3 M 6 20-190 20-190 20-190M 8 20-1811/4-20 20-193 20-193 20-1935/16-18 20-182
T-Slot Nut, Zn M 3 20-033 20-036 20-036M 4 20-034 20-037 20-037M 5 (#10-32) 4 20-035 20-038 20-038
Notes:1) T-Slot Nut must be inserted from profile end.2) Retainer Spring 20-0614 is available for HD T-Slot Nuts.3) Retainer Springs 24-719-6 and 24-719-8 are available for M6 (1/4-20) and M8 (5/16-18) Economy T-Slot Nuts.4) Due to the almost identical geometric and dimensional shape of M5 and #10-32 UNF threads, standard #10-32 screws will fit in all M5 T-Slot Nuts.
20-003,20-003SS
Basic Fastening Components
-
258Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston , TX 77066
HardwareCatalog 1816
800-333-4932IPSINDUSTRIAL PROFILE SYSTEMS
Profile Dimensions (mm) Torque Weight Series Type A Hex B C D E F G H K L (Nm) (g) Part #
Std M8x20 25 25 20-00240 SS M8x20 5 36 7.8 17 11 2.9 16 40 20 7 20 21 20-002SS SAE 5/16-18x3/4 3/16 25 25-003
Light M8x18 32 2.3 25 41 20-01450 Std M8x20 5 46 2.9 25,20 27 20-05130 Std M8x18 30 15 25 15 20-003 SS M8x16 23.7 7.8 16 8.9 1.9 16 20 14 20-003SS
28 Std M8x18 28 14 25 15 20-003
SS M8x16 20 14 20-003SS20 Std M5x12 3 19 4.8 10 4.5 1.1 10 20 10 4.3 4.5 5 20-021
StandardFastening Set
Technical DataPlate: St, zinc plated orstainless steel (SS)
To make SAE Standard Fastening Set 28 usefastening plate (20-003Z1) and 5/16-18 x 5/8BHCS (25-110-5)
ApplicationProvides power-lock connection andalignment of profiles.20-014 is recommended for use on 40series Light and Closed Slot profiles.
1 Location of access holes for hexagon wrench, number dimension represents centerdimensions of pilot holes.
2 Multiple fastening elements are required for the various profile cross sections.3 Joining and assembly of profiles with the Standard Fastening Set
Inquire about quantity discounts
1
2 3
Description Unit Weight Part #Flat Plate Fastening Set 1 set 13 g 20-028Flat Plate (w/o screw) 1 pc 6 g 20-028Z1
Flat PlateFastening Set
1 Connecting Closed SlotProfiles
2 Using M8x10 BHCS(24-110-8) and Flat Plate(20-028Z1) for connecting28 series profiles
1 2
ApplicationFlat Plate Fastening Set is suitable forconnecting two profiles at 90 whenStandard Fastener can not be used.
Inquire about quantity discounts
Technical DataSt, zinc platedTightening torque: 25 Nm
Add Z1 to part number for a fastening plate without screw (i.e. 20-002Z1)
-
22
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, Tx 7706659
800-333-4932 IPSINDUSTRIAL PROFILE SYSTEMS
Catalog 1816Hardware
UniversalFastening Set
2 3
4
11-2 90 connection of facing profiles
movable in T-slot3 Step bore dimensions4 Structural applications require one
fastener for each connecting T-slot onboth sides of the profile
5 Univ. Fast. Set 20-011 for attaching 28series profile to 40 series profile
Technical DataZn cast, galvanizedIncludes screw and T-slot Nut, St.
Tightening torque40 & 50 series: 25 Nm30 & 28 series: 14 Nm20 series: 3 Nm
ApplicationFor 90 profile connections and movableconnections. Ideal for retrofit/additionsto existing frames.Fastening set 20-011 used to connect28 series profiles to 40 series profiles.Fastening set 28 20-005: T-slot nut 28must be inserted at end of profile andslid to proper position.
Profile Dimensions (mm) Weight Series A Hex B C D E F (g) Part # 40, 50
M8x30 BHCS 516
33.8 41 20-0045/16-18x1/4 BHCS 3/16 33.8 41 25-004
28 M6x27 SHCS 8 20 31.3 20 30 20-005 28/40 M6x30 SHCS 5 11 33.5 36 20-011 30 M6x27 SHCS 31.3 31 20-008 20 M4x14 SHCS 3 8.5 5 12 17.2 10 7 20-040
Universal Zinc Casting 40 (w/o screw and T-nut) 20-004Z1Universal Zinc Casting 28 (w/o screw and T-nut) 20-005Z1
Inquire about quantity discounts
5
-
260Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston , TX 77066
HardwareCatalog 1816
800-333-4932IPSINDUSTRIAL PROFILE SYSTEMS
Butt-Fastening Set
3
1-2 Processing of profiles and assembly ofthe connection.
3 The number of fasteners required isdetermined by the size of the profile.
Description Unit Weight Part #Butt-Fastening Set M8 1 set 59 g 20-006Butt-Fastening Set M6 1 set 45 g 20-012
Inquire about quantity discounts
Technical DataZn cast, galvanized20-006 includes M8x45 BHCS20-012 includes M6x50 SHCS and M6hex nutTightening torque: 20-006 = 25 Nm
20-012 = 14 Nm
ApplicationFor end-face fastening (lengthening) ofprofiles. Use M8 Fastener for 40 and 50series profiles. Use M6 fastener for 28and 30 series profiles and pneumaticapplications on 40 series profiles.
1
Description Unit Weight Part #Profile-to-Wall Fastening Set M8 1 set 32 g 20-015Profile-to-Wall Casting (w/o screw,washer) 1 pc 20 g 20-015Z1
Profile-to-WallFastening Set
ApplicationFor connection of 40 series profiles toother parts without T-slots, particularlyCorner Elements and Reversing Units.
Technical DataZn cast, galvanizedIncludes M8x30 BHCS and M8 ribspring washerTightening torque: 25 Nm
20-006
20-012
2
-
22
Parker Hannifin CorporationIndustrial Profile Systems Business Unit
Houston, Tx 7706661
800-333-4932 IPSINDUSTRIAL PROFILE SYSTEMS
Catalog 1816Hardware
1
3
Technical DataSt, zinc plated self-tapping fastenerM6x40 SHCS, M6 T-slot nut 40,black nylon cover.Tightening torque: 14 Nm
Description Unit Weight Part #Self-Tapping Connector 40 1 set 34 g 20-019
ApplicationFor right angle attachment of 40 seriesprofiles. Particularly suitable forretrofitting to existing structures, as noservicing is needed. The self-tappingfastener is inserted into end of any T-slotfrom the end face. Left handed threads.
Self-TappingConnector
1 Slide screw into slot ofprofile
2 Install the self-tappingfastener with 6mm hexagonwrench
3 Insert the T-slot nut andattach the connector with5mm hexagon wrench.Install plastic cover
2
3 41
Parallel Clamp
2
1-2 Installation 3 Profiles at 90 4 Profile at angles
Description Unit Weight Part #Parallel Clamp 40 1 set 37 g 20-017
ApplicationFor parallel clamping 40 series profilesin any angular position. No machining ofprofiles is necessary.
Technical DataSt, stainlessM6x20 FHCS, M6x14 Low sockethead screw, T-slot nut M6Tightening torque: 5.5 Nm
-
262Parker Hannifin Corporation
Industrial Profile Systems Business UnitHouston , TX 77066
HardwareCatalog 1816
800-333-4932IPSINDUSTRIAL PROFILE SYSTEMS
Mitre Connector
Technical DataSt, zinc plated
40 Fastening Set includes two M8Economy T-slot nuts 40 and twoM8x16 Cone point set screws.
28 Fastening Set includes: two M6Economy T-slot nuts 28 and twoM6x12 Cone point set screws.
Mitre Bracket: Al, anodized
Loctite Thread Locker No. 262recommended to secure setscrews
Description Unit Weight Part #Mitre Connector HD w/ 40 Fast. Set 1 set 67 g 20-022Mitre Connector MD w/