iPORT Analog-Pro IP Engine
2
DATA SHEET For more information, visit www.pleora.com/our-products/iport-video-transmitters/iport-analog-pro iPORT ™ Analog-Pro IP Engine Add high-value analog cameras to your video network Applications • Military vetronics systems • Intelligent traffic systems • Critical infrastructure surveillance systems • Industrial inspection systems Features • Full resolution at 30 fps per channel • Two RS-232 ports to control external accessories • Software-controlled general purpose inputs and outputs • Compact form factor, low power consumption • Low, consistent latency Compatibility • NTSC • PAL • CCIR • RS-170 Expand your GigE Vision®video network to include analog cameras with Pleora’s iPORT ™ Analog-Pro IP engine. Compact and simple to integrate, the iPORT Analog-Pro IP engine transmits high-quality video from analog cameras with low, predictable latency. Able to transmit video from up to two analog cameras simultaneously, this video transmitter is ideal for systems integrators looking to realize the benefits of networked video connectivity, while leveraging high-value analog cameras. The iPORT Analog-Pro IP engine is compat- ible with the GigE Vision and GenICam™ standards for communication over a Gigabit Ethernet (GigE) link, which increases interop- erability between products from different man- ufacturers, while dramatically lowering system cost and complexity. With GigE, cabling distances of up to 100 m can be achieved using standard CAT5/6 cabling; by incorporat- ing common, off-the-shelf switches, cabling distances can be unlimited. Decreased cable size, increased flexibility, and a tighter cable bend radius are a few of the additional bene- fits gained when using GigE for video transfer. The iPORT Analog-Pro IP engine provides software-controlled general purpose inputs and outputs (GPIO), as well as two RS-232 ports to control external accessories such as motorized wipers, and pan/tilt housings. Able to transmit video at full resolution at up to 30 frames per second with low, consistent latency, the iPORT Analog-Pro IP engine is available as a compact, low-power OEM board set designed for use in a variety of housings. Compatible with Pleora’s vDisplay ™ video receivers, as well as Pleora’s feature-rich application toolkit, eBUS ™ SDK, the iPORT Analog-Pro enables analog cameras to become part of a complete networked video connectivity solution.
Transcript of iPORT Analog-Pro IP Engine
D ATA S H E E T
For more information, visit www.pleora.com/our-products/iport-video-transmitters/iport-analog-pro
iPORT™ Analog-Pro IP EngineAdd high-value analog cameras to your video network
Applications• Military vetronics systems
• Intelligent traffic systems
• Critical infrastructure surveillance systems
• Industrial inspection systems
Features• Full resolution at 30 fps per
channel
• Two RS-232 ports to control external accessories
• Software-controlled general purpose inputs and outputs
• Compact form factor, low power consumption
• Low, consistent latency
Compatibility• NTSC
• PAL
• CCIR
• RS-170
Expand your GigE Vision® video network to include analog cameras with Pleora’s iPORT™ Analog-Pro IP engine. Compact and simple to integrate, the iPORT Analog-Pro IP engine transmits high-quality video from analog cameras with low, predictable latency. Able to transmit video from up to two analog cameras simultaneously, this video transmitter is ideal for systems integrators looking to realize the benefits of networked video connectivity, while leveraging high-value analog cameras.
The iPORT Analog-Pro IP engine is compat-ible with the GigE Vision and GenICam™ standards for communication over a Gigabit Ethernet (GigE) link, which increases interop-erability between products from different man-ufacturers, while dramatically lowering system cost and complexity. With GigE, cabling distances of up to 100 m can be achieved using standard CAT5/6 cabling; by incorporat-ing common, off-the-shelf switches, cabling distances can be unlimited. Decreased cable size, increased flexibility, and a tighter cable bend radius are a few of the additional bene-fits gained when using GigE for video transfer.
The iPORT Analog-Pro IP engine provides software-controlled general purpose inputs and outputs (GPIO), as well as two RS-232 ports to control external accessories such as motorized wipers, and pan/tilt housings.
Able to transmit video at full resolution at up to 30 frames per second with low, consistent latency, the iPORT Analog-Pro IP engine is available as a compact, low-power OEM board set designed for use in a variety of housings.
Compatible with Pleora’s vDisplay™ video receivers, as well as Pleora’s feature-rich application toolkit, eBUS™ SDK, the iPORT Analog-Pro enables analog cameras to become part of a complete networked video connectivity solution.
Pleora Technologies Inc.359 Terry Fox Drive, Suite 230Kanata, Ontario Canada, K2K 2E7
Tel: +1.613.270.0625Fax: +1.613.270.1425 Email: [email protected] www.pleora.com
© 2011 Pleora Technologies Inc. iPORT, vDisplay, eBUS, and NetCommand are trademarks of Pleora Technologies Inc. Information in this document is provided in connection with Pleora Technolo-gies products. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. Pleora may make changes to specifications and product descrip-tions at any time, without notice. Other names and brands may be claimed as the property of others. EX002-021-0001 Rev 02.2 111101
D ATA S H E E T
iPORT™ Analog-Pro IP EnginesConnectors
Power •Enclosed: Hirose 6-pin•OEM: 2-pin, 0.10” header
Network •RJ-45female
Video interface •2xBNCfemale
Serial and GPIO •12-pinround,lockingconnector
Characteristics
Size (L x W x H) •Enclosed: 113mm x 82mm x 51mm•OEM: 105 mm X 52 mm X 42 mm
Operating temperature •0ºCto40ºC(OEMhigherwiththermalpad)
Storage temperature •-40°Cto85°C
Power supply •5Vto16V
Power consumption •Maximum4W(withbothchannelsinuse)
Networked Video Connectivity Solutions
iPORT™ IP Engines •Highlyreliable;upto1Gb/sdatatransferrate with low, end-to-end latency
•OEMboardsetorenclosedunit•32MBimagebuffer•4TTLinputs,3TTLoutputs(4thTTLoutput
available with customer-supplied connector); software-controllable
•2RS-232serialports
eBUS™ SDK •ComprehensiveC++-basedapplicationdevelopment toolkit
•eBUSUniversalProdriver•Sampleapplications,includingNetCommand™
sample application, a demonstration of multi-device network connectivity
•Driverinstallationtool•Documentation
GigE Vision® and GenICam™
•Fullycompatiblefirmwareload•Guaranteesdeliveryofallpackets•Comprehensivedatatransferdiagnostics•SupportsUnconditionalStreaming
Video Formats
Video standards •NTSC,PAL,CCIR,RS-170
Pixel formats •8-bitmonochrome,YUV4:2:2(packed)
Deinterlacing Support
•Off•Weave•Lineduplication
Networking Features
Gigabit Ethernet-based
•Low-cost,easy-to-useequipment•Compatiblewith10/100/1000Mb/sEthernet
networks•SupportsIEEE802.3(Ethernet),IP,IGMPv.2,
UDP and ICMP (ping)•Longreach:100mpoint-to-point,unlimited
distance with Ethernet switches
Multicast capability •Enablesadvanceddistributedprocessingandcontrol architectures
