Ipn teeth mold-chart dentsply

A 1/16” PER PAGE (1/8” COMBINEDACROSS SPREAD) HAS BEEN

ADDED TO THE WIDTH OF THE OUTSIDE AND INSIDE COVER PAGESTO ACCOUNT FOR THE THICKNESS

OF THE PIECE TO MAKE SURECOVER FULLY WRAPS AROUND

INTERIOR PAGES, PLEASE ADJUSTAS NEEDED.

CYAN RULES REPRESENT TRIM,FOLDS AND DIE CUTS.

CYAN RULES DO NOT PRINT!!

DENTSPLY International, P.O. Box 872, York, PA 17405-0872 1-800-786-0085Distributed by DENTSPLY Canada161 Vinyl Court, Woodbridge, ON, L4L 4A3 1-800-263-1437www.dentsply.com www.trubyte.dentsply.com www.denturehelp.com ©2003 DENTSPLY International, Inc. All rights reserved.

Printed in U.S.A., 905473 Rev. D, 4343-A (3/08)

Portrait® IPNBioblend® IPNBioform® IPN

IPN® Teeth Mould Chart IPN® Teeth Mould Chart

1

2Over 2 Decades of IPN® Material Performance

Unrivaled performance since 1981, unmatched tooth variety and

selection, unequivocal evidence of superiority from rigorous scientific

evaluations, and unparalleled protection of the industry’s broadest tooth

warranty – those are just a few of the reasons why countless dental

professionals trust Trubyte IPN teeth to satisfy their patients.

IPN teeth also offer an exceptional warranty against excessive wear,

abrasion, stain, cracking, crazing and loss of luster. This guarantee ensures

optimum function and overall aesthetics.

And unlike other hardened plastic teeth, IPN teeth are

able to mimic the gradual wear of tooth enamel, while

delivering outstanding occlusal integrity and long-lasting

aesthetics. The low wear feature is due to a proprietary

chemistry that employs an Interpenetrating Polymer Network (IPN).

This is formed when a highly engineered cross-linked polymer is combined with a

special cross-linked monomer to form a highly wear-resistant double cross link.

Look for the Crescent on the linguals of Trubyte premium

anteriors and on the buccal of the first molar on premium

posteriors. This is your proof that quality Trubyte IPN

premium teeth were used.

ConventionalAcrylic Material IPN Material

Single Cross-LinkedPolymer

Double Cross-LinkedPolymer

PREMIU

M M

ATERIALS

YOUR BEST CHOICES FOR A PREMIUM DENTURE.2IPN® TEETH

OVER 2 DECADES OF SUPERLATIVE PERFORMANCE

THREE PREMIUM BRANDS3THREE SHADE

SYSTEMS

3

SHA

DE SYSTEMS

33 Shade SystemsOur Bioform Mould System is offered in three distinct IPN brands, each

in separate shade guides. These provide you with significant aesthetic

advantages: The ability to enhance every smile, to match existing dentition,

and to satisfy the most discriminating dental professionals and their patients.

Bioblend® IPNThe 12 characterized blends of Bioblend IPN teeth are carried across

the set and exemplified with the three-tooth tabs displayed

in the Bioblend blend selector. Many of the moulds are

characterized by the skilled hands of our craftspeople

to mimic natural decalcification and check lines.

Bioform® IPNBioform IPN teeth feature the 24 shades from the Bioform shade guide,

one of the most popular in removable prosthodontics. Each Bioform

mould is an exact duplicate of a healthy, natural tooth with all the

subtle anatomical details so important to a lifelike appearance.

Portrait® IPNPortrait IPN teeth are available in all 16 A-D shades, the most popular

“Base 8” Bioform shades, as well as three modern white shades in the

illuminé™ range. These teeth – developed, tested and approved through

research involving more than 2,000 dentists and lab technicians from North

America – deliver an unmatched combination of aesthetics, function

and performance. Each anterior tooth blends three

different shaded layers of IPN material,

creating five distinct aesthetic zones.

A GUIDE TO NATURAL ANTERIOR ARRANGEMENT4BASIC FORMS

5

44 Basic Facial Forms

The principle of natural aesthetic harmony between face form and maxillary anterior tooth

arrangement supports that there are four basic face form classifications observed in nature. This

theory has been well demonstrated by clinical research and extensive application in many private

dental offices. For each of these categories, there is a workable corresponding basic anterior

tooth arrangement. Similarly, modifications appearing in the basic face form may be reflected by

corresponding modifications in the anterior arrangement. The Bioform® mould system incorporates

this aesthetic principle into each lifelike mould form which replicates human dentition.

Below, we describe and illustrate the four face forms. A suggested procedure is

to use the Trubyte Tooth Indicator (#98981, pictured at right) to classify the patient

by face form. To specify the desired arrangement, such as softened or vigorous,

for the try-in denture, refer to the Trubyte Anterior Set-Up booklet (#3900). Final

individualizing can be accomplished at the try-in appointment.

The Square FaceIn the Square Face, the sides of the face from the hairline to the levels of the

condyles to the angles of the jaw are straight and parallel.

The Square Tapering FaceIn the Square Tapering Face, the sides of the head are parallel from the condyles

upward. From the condyles downward along the sides of the face, the outline tapers in

to the angles of the jaw.

The Tapering FaceThe Tapering Face is widest at the hairline and narrowest at the angles of the jaw.

The lines converge in toward the jaw.

The Ovoid FaceThe Ovoid Face is widest through the center at the level of the condyles. It curves

upward and downward to form an oval outline.

Trubyte classifies these forms even more stringently into seven category breakdowns for even finer patient

facial definition as demonstrated in the Mould Chart to follow.

FACIA

L FORM

S

Photo courtesy of Drs. Littleand Knight, Professionals inDentistry, San Antonio, TX.

Trubyte Tooth Indicator

DESIGNED FROM NATURE

BIOFORM MOULD SYSTEM

UNSURPASSED VARIETY

7

The Bioform Mould Classification SystemSteps to Identify and Select Bioform Anterior Moulds

Classification1. Square2. Square Tapering3. Square Ovoid4. Tapering5. Tapering Ovoid 6. Ovoid7. Square Tapering Ovoid

First Number

Step 1: Using the classification from the

previous page, select the numberfrom 1 to 7 that best represents thepatient’s facial form.

The number selected is the firstcharacter of the mould identificationnumber, located in the upper leftcorner of the tooth card.

In the ovoid and ovoid combination forms, the mesio-distal aspect of the labial surfaceof the maxillary centrals is more or less round. In the square, square tapering and taperingforms, it is more or less flat.

Proportionand ContourProportion of the Tooth

1. Long2. Medium3. Short4. Long5. Medium 6. Short

Second Number

Step 2:Using a flat device such as the

Trubyte Tooth Indicator (#98981),select the number from 1 to 6 thatrepresents both the proportion ofthe tooth (long, medium or short) aswell as the facial contour (straight or curved).

The number selected is the second character of the mould identification number.

FacialContour

StraightStraightStraightCurvedCurved Curved

Letter

Step 3: Using the Trubyte MM Ruler

(Part #3496), measure the width ofthe upper six anterior teeth on thecurve, from distal to distal.

The measurement will fall intoone of the ranges identified with theletters B through J.

The letter selected is the thirdcharacter of the mould identificationnumber.

Curved Straight

Square SquareTapering

Tapering Ovoid

Width of Upper Six Anterior Teeth on CurveB. less than 44.00 mmC. 44.00 to 45.50 mmD. 45.50 to 48.00 mmE. 48.00 to 49.00 mmF/X. 49.00 to 51.50 mmG. 51.50 to 54.00 mmH. 54.00 to 56.00 mmJ. 56.00 mm or greaterSome moulds may vary from this standard.Please consult mould chart dimensions.

40B C D E G H JFX

605022 30100 6 18

40B C D E G H JFX

605022 30100 6 18

MO

ULD IDEN

TIFICATION

See

Reve

rse

Side

for

Qui

ck R

efer

ence

Gui

de fo

r M

ould

and

Sha

de P

opul

arity

Nec

kM

ould

For

m I.

D.

Mam

elon

sEn

amel

/Inc

isal

Body

Nec

k/C

ervi

cal B

lend

Trub

yte

Cre

scen

t

If yo

u lik

e th

e m

agni

fied

view

...us

e th

is to

ol to

cap

ture

bot

h th

e m

ould

det

ail a

nd th

e C

resc

ent o

n al

l IPN

teet

h.

Quick Reference Guide for Mould and Shade Popularity

Shades and Moulds are listed in Order of Preference based onProduct Sales

PORTRAIT IPN SHADE POPULARITYP2/A2, P3/A3, P1/A1, P62, P3.5/A3.5, P11/B1, P21/C1,P22/C2, P12/B2

Portrait IPN Anterior MOULD PreferenceUppersSmall Moulds: 21D, 42D, 55DMedium Moulds: 12E, 22E, 42F, 32E, 13E, 43FLarge Moulds: 11H, 45H, 12G, 21X, 21J, 62G

LowersSmall Moulds: F, C, EMedium Moulds: N, H, P, MLarge Moulds: S, R, K1, O

Portrait IPN Posterior MOULD Preference Per CategoryPortrait IPN 0˚: 632, 630Portrait IPN Anatoline: 332, 330, 334, 336Portrait IPN 20˚: 31M, 29M, 33M, 31LPortrait IPN 22˚ BioStabil: 532Portrait IPN 33˚: 32M, 34M, 30M, 32LPortrait IPN 40˚ EuroLine: 732

BIOBLEND IPN SHADE POPULARITY104, 100, 102, 106, 108, 113

Bioblend IPN Anterior MOULD PreferenceUppersSmall Moulds: 21D, 42D, 55DMedium Moulds: 22E, 12E, 42F, 42G, 32E, 13ELarge Moulds: 21X, 12G, 11H, 21G, 45H, 22G

LowersSmall Moulds: F, C, EMedium Moulds: N, P, H, MLarge Moulds: R, S, O

Bioblend IPN Posterior MOULD PreferenceBioblend IPN 22˚ BioStabil:532, 530

BIOFORM IPN SHADE POPULARITYB62, B59, B66, B65, B69, B67, B91

Bioform IPN Anterior MOULD PreferenceUppersSmall Moulds: 42D, 21D, 21C, 55DMedium Moulds: 12E, 22E, 42G, 42F, 43F, 13ELarge Moulds: 11H, 45H, 12G, 21J, 62G, 22G

LowersSmall Moulds: F, C, EMedium Moulds: N, P, H, MLarge Moulds: S, R, K1, O

Bioform IPN Posterior MOULD Preference Per CategoryBioform IPN Monoline: 431, 429Bioform IPN Anatoline: 332, 330, 334Bioform IPN 20˚: 31M, 29M, 33M, 29LBioform IPN 30˚ PT: 230M, 233M, 230LBioform IPN 33˚: 32M, 34M, 30M, 32L

I

Rx

K1

41J

42C

42D

42F

C

F

H

OP

S

C

MNX

F

OJ

RVX

N

G

S

H

C

S

31F

32B

32E

32G

35E

36F

POJ

R

HGF

22G

22H

24F

25G

P

PO

I

9

H

C

P

21C

21D

21E

21F

21G

21H

21J

21X

22C

22E

Z Rx

K1

U

W

L

O

F

C

H

11D

11G

11H

12E

12F

12G

13D

13EH

CB

VRG

N

NM

WS

R

E

Leng

th of

Centr

al

w/o

Colla

r (mm

)W

idth

of Ce

ntral

(mm)

Widt

h of

6 An

terior

s

on C

urve

/Flat

(mm)

SQUARE10.25 8.00 47.00/

44.00

11.10 8.75 52.00/48.00

11.60 9.35 54.50/50.50

10.60 8.50 50.00/45.50

10.25 8.50 50.50/47.00

10.60 9.15 53.00/49.00

9.50 7.75 46.00/44.00

9.30 8.10 47.50/44.00

KEYSHADE AVAILABILITY ARTICULATION

13EUPPER

ANTERIORSUGGESTED

LOWERSIf listed, mould is available in

that shade system.

Bioblend and Bioform moulds are available in both IPN hardened plastic andregular plastic materials.

Leng

th of

Centr

al

w/o

Colla

r (mm

)W

idth

of Ce

ntral

(mm)

Widt

h of

6 An

terior

s

on C

urve

/Flat

(mm)

SQUARETAPERING

Leng

th of

Centr

al

w/o

Colla

r (mm

)W

idth

of Ce

ntral

(mm)

Widt

h of

6 An

terior

s

on C

urve

/Flat

(mm)

SQUARETAPERING

9.60 8.60 51.00/47.00

12.10 9.25 54.00/50.00

12.00 8.45 48.00/44.50

10.10 8.70 51.50/47.50

11.50 8.60 49.50/46.00

9.20 7.50 44.00/40.50

10.00 8.20 49.00/45.00

11.20 8.95 52.50/49.00

10.25 8.25 48.50/46.00

9.75 8.50 51.00/47.00

SQUAREOVOID

Leng

th of

Centr

al

w/o

Colla

r (mm

)W

idth

of Ce

ntral

(mm)

Widt

h of

6 An

terior

s

on C

urve

/Flat

(mm)

TAPERING

42G

42H

43D

43F

44E

45F

45H

Mou

ld N

o.(Lo

wer A

rticu

lation

)

Mou

ld N

o.(Lo

wer A

rticu

lation

)

Mou

ld N

o.(Lo

wer A

rticu

lation

)

Mou

ld N

o.(Lo

wer A

rticu

lation

)

MO

ULD CH

ART

13.25 10.00 58.00/53.50

9.50 7.50 45.00/42.00

10.25 8.00 48.00/43.50

10.50 8.45 50.00/46.50

10.40 8.70 52.00/48.00

11.25 9.00 55.00/50.50

8.70 7.85 45.50/41.50

9.60 8.80 49.00/45.50

11.50 8.25 48.50/43.50

10.75 9.00 51.50/46.50

11.25 8.85 54.00/49.50

PORTRAIT BIOBLEND BIOFORM


BIOFORM

BIOBLEND BIOFORMPORTRAIT

BIOFORMPORTRAIT



BIOBLENDPORTRAIT

BIOBLEND



BIOBLENDPORTRAIT

BIOFORM

BIOBLENDPORTRAIT

BIOBLEND

BIOBLENDPORTRAIT

BIOBLENDPORTRAIT


10.00 7.70 45.50/42.00

10.50 8.05 47.00/44.00

12.00 9.00 51.00/46.00

11.00 8.00 50.00/45.00

12.00 9.75 56.00/52.00

13.00 10.00 56.00/52.50

12.40 10.20 58.00/54.50

10.90 8.75 50.00/46.50

9.85 7.70 44.50/41.00

10.75 8.50 49.00/45.00


BIOBLENDPORTRAIT


BIOBLENDPORTRAIT


BIOBLENDPORTRAIT

BIOFORM

BIOFORM BIOBLEND BIOFORMPORTRAIT


BIOBLEND



BIOBLEND




BIOBLEND

PORTRAIT


TRUBYTE® IPN®

UPPER ANTERIORS



65G

65H

74E

74H

75E

75G

76D

A84N

C

VR

N

K1

L

US

OJC

D

52C

54F

55D

55F

56G

62D

62E

62G

N

E

M

PV

F

F

K1

R

11

Leng

th of

Centr

al

w/o

Colla

r (mm

)W

idth

of Ce

ntral

(mm)

Widt

h of

6 An

terior

s

on C

urve

/Flat

(mm)

J

9.00 7.40 44.00/40.00

11.50 8.65 49.00/45.00

10.25 8.25 47.50/43.50

10.85 8.50 50.50/46.50

9.75 9.25 52.00/48.50

10.10 8.10 47.00/43.00

10.00 8.00 48.50/44.00

11.90 9.20 52.50/48.50

Leng

th of

Centr

al

w/o

Colla

r (mm

)W

idth

of Ce

ntral

(mm)

Widt

h of

6 An

terior

s

on C

urve

/Flat

(mm)

OVOID11.50 9.00 52.00/

47.50

11.50 9.75 55.00/50.50

11.00 8.30 49.00/44.50

12.25 9.00 54.00/50.00

11.00 8.35 49.50/45.50

11.20 9.10 53.50/49.00

9.25 7.75 45.50/42.00

11.60 8.45 48.50/44.50

Leng

th of

Centr

al

w/o

Colla

r (mm

)W

idth

of Ce

ntral

(mm)

Widt

h of

6 An

terior

s

on C

urve

/Flat

(mm)

B

C

D

E

F

G

H

I

J

K

K1

L

TAPERINGOVOID

OVOID

SQUARETAPERING OVOID

LOWER ANTERIORS

8.25 4.75 35.00/32.50

9.00 4.90 35.00/31.50

8.25 4.55 33.50/30.50

9.40 4.95 38.00/33.50

8.85 4.95 36.50/32.00

9.65 5.10 38.00/34.00

9.10 4.90 36.50/32.00

12.25 5.75 43.00/36.00

10.25 5.50 40.50/35.50

9.25 4.75 36.50/31.50

11.85 5.90 43.50/38.50

9.00 5.15 37.00/33.00

Leng

th of

Centr

al

w/o

Colla

r (mm

)W

idth

of Ce

ntral

(mm)

Widt

h of

6 An

terior

s

on C

urve

/Flat

(mm)

M

N

O

P

R

S

U

V

W

X

Z

Rx

8.80 5.05 39.50/35.00

9.10 5.20 38.00/33.50

9.80 5.40 40.00/35.50

8.75 5.40 39.50/35.50

9.25 5.20 40.50/36.00

9.65 5.70 40.00/38.50

10.50 5.75 42.00/38.50

9.00 5.60 41.50/37.00

10.25 5.75 42.00/39.00

8.75 5.00 39.00/36.00

11.50 6.25 45.00/42.00

12.75 5.75 42.00/37.00

Mou

ld N

o.(Lo

wer A

rticu

lation

)

Mou

ld N

o.(Lo

wer A

rticu

lation

)

Mou

ld N

o.

Rx





BIOFORM


BIOFORM


BIOBLENDPORTRAIT

BIOFORM

BIOFORMPORTRAIT


BIOFORMPORTRAIT

BIOFORMPORTRAIT


BIOFORM

BIOFORM





BIOFORMPORTRAIT


BIOFORMPORTRAIT

BIOBLEND


BIOFORMPORTRAIT

Mou

ld N

o.








BIOFORMPORTRAIT


BIOBLEND

BIOFORM

PORTRAIT

PORTRAIT

TRUBYTE IPNUPPER ANTERIORS

HKEYSHADE AVAILABILITY ARTICULATION

13EUPPER

ANTERIORSUGGESTED

LOWERSIf listed, mould is available in

that shade system.

Bioblend and Bioform moulds are available in both IPN hardened plastic andregular plastic materials.



13

PORTRAIT IPN0° POSTERIOR

Offer minimal interference in lateral excursions.Specially contoured occlusal surfaces of interacting ridges and clearance spacesenhance chewing efficiency and help preventfood packing.

U

L

Y

X

The average width of a 1x4 set of upper posteriors = X; the lower posteriors = Y. The average depth of the upper left first molar = U; the lower left first molar = L. Portrait posteriors are pictured 90% of original size. ISSO3336:1993 ADA Processing instructions available upon request.

BIOFORM IPN 0°MONOLINE® POSTERIOR

Give the illusion of natural cusps. Uniquebuccal carvings simulate natural anatomy forsuperior aesthetics in a flat plane design.

PORTRAIT IPN 10° POSTERIOR/BIOFORM IPN ANATOLINE® POSTERIOR

Provide the look of well-worn natural teeth.Shallow cusps minimize interference, yetprovide a definite centric. In occlusion, theupper lingual cusps align to form an excep-tionally efficient “lingual cutting knife.”

PORTRAIT IPN 20° POSTERIOR/BIOFORM IPN 20° POSTERIOR

330X = 30.00Y = 32.00U = 7.70L = 8.25

332X = 32.00Y = 34.50U = 8.50L = 9.25

334X = 34.00Y = 36.50U = 9.10L = 9.40

336X = 36.00Y = 38.50U = 9.50L = 10.50

31SX = 31.00Y = 34.75U = 9.00L = 9.50

31MX = 31.00Y = 34.50U = 8.75L = 9.70

31LBioformX = 31.00Y = 35.50U = 9.00L = 9.75PortraitX = 32.00Y = 35.50U = 8.90L = 9.50

KEYSHADE AVAILABILITY

If listed, mould is available inthat shade system.

Trubyte IPN Posteriors are pictured actual size.

ISO3336: 2000ANSI/ADA Specification No. 15-2000Processing instructions available upon request.

Mou

ld N

o.

Mou

ld N

o.

Mou

ld N

o.

The average width of a 1x4 set of upper posteriors = X;the lower posteriors = Y.

The average depth of the upper left first molar = U;the lower left first molar = L.

PORTRAIT

PORTRAIT

PORTRAIT

BIOFORM

BIOFORM

BIOFORM PORTRAIT BIOFORM

PORTRAIT BIOFORM

PORTRAIT BIOFORM

PORTRAIT

PORTRAIT BIOFORM

PORTRAIT BIOFORM

BIOFORM

PORTRAIT BIOFORM

PORTRAIT BIOFORM

630X = 30.00Y = 32.00U = 8.80L = 8.80

632X = 32.00Y = 34.00U = 9.40L = 9.40

634X = 34.00Y = 36.00U = 9.90L = 9.90

429X = 29.00Y = 32.50U = 7.50L = 8.00

431X = 31.00Y = 34.50U = 8.25L = 8.00

433X = 33.00Y = 35.50U = 9.00L = 9.00

TRUBYTE IPNPOSTERIORS

29SX = 29.00Y = 33.25U = 8.50L = 8.75

29MX = 29.00Y = 32.50U = 8.25L = 9.10

29LX = 29.00Y = 33.00U = 8.25L = 9.00

Shallow 20° cusps offer minimal interference inlateral excursions. Specially contoured occlusalsurfaces of interacting ridges and clearancespaces enhance chewing efficiency and helpprevent food packing.

BIOFORM

Mou

ld N

o.

15

PORTRAIT IPN 20° POSTERIOR/BIOFORM IPN 20° POSTERIOR

PORTRAIT IPN 33°/BIOFORM IPN 33° POSTERIOR

Fully anatomical with natural cuspal contours.Ideal for complete and partial dentures whichocclude with well-developed natural teeth.

PORTRAIT IPN 40°EUROLINE® POSTERIOR

EuroLine IPN 40˚ posteriors are German designedwith a natural-looking “young” occlusal pattern,wide food table and long crown form. Using 30˚incisal and condylar guidance settings, they canbe arranged for maximum efficiency, aestheticsand integration in full, partial or combination cases.

730X = 29.00Y = 30.70U = 9.90L = 8.30

732X = 32.00Y = 33.60U = 11.00L = 9.20

734X = 33.50Y = 35.50U = 11.50L = 9.60

30MX = 30.00Y = 32.50U = 8.10L = 8.50


32MX = 32.00Y = 34.50U = 8.50L = 9.00

32LX = 32.00Y = 35.00U = 8.50L = 8.75

PORTRAIT IPN 22° BIOSTABIL® POSTERIOR/BIOBLEND IPN 22° BIOSTABIL

Aesthetically and functionally suited for completeand partial dentures. Shallow non-interfering cuspsfacilitate freedom in all excursions.

530X = 30.00Y = 31.50U = 7.90L = 8.25

532X = 32.00Y = 33.50U = 8.65L = 9.00

33MX = 33.00Y = 37.00U = 9.25L = 10.25


35MX = 35.00Y = 39.50U = 9.80L = 10.90

536X = 36.00Y = 37.00U = 10.50L = 11.00

233LX = 33.00Y = 33.25U = 10.25L = 10.50

34MX = 34.00Y = 36.50U = 9.10L = 9.50


SHADE AVAILABILTYSee shade availability chart in the “ReferenceGuides” section, on the following pages, for a full breakdown of shades for anterior and posterior moulds.

233MX = 33.00Y = 34.50U = 10.25L = 10.00

533X = 33.00Y = 34.50U = 10.00L = 9.70

Mou

ld N

o.

Mou

ld N

o.

Mou

ld N

o.

Mou

ld N

o.

PORTRAIT BIOFORM

PORTRAIT BIOFORM

PORTRAIT

BIOBLENDPORTRAIT

BIOBLENDPORTRAIT

BIOBLENDPORTRAIT

BIOBLENDPORTRAIT

BIOFORM

BIOFORM

BIOFORM

BIOFORM

BIOFORM

PORTRAIT BIOFORM

PORTRAIT BIOFORM

PORTRAIT BIOFORM

PORTRAIT BIOFORM

PORTRAIT BIOFORM

PORTRAIT BIOFORM

PORTRAIT

PORTRAIT

PORTRAIT

TRUBYTE IPNPOSTERIORS

BIOFORM IPN 30°PT® POSTERIOR

Designed and carved for maximum chewing efficiency and easy set-up. In a natural smile, theupper premolars slope inward from the gingival tothe occlusal. The PT design simulates this valuableaesthetic consideration.

230SX = 30.00Y = 31.50U = 9.25L = 9.00

230MX = 30.00Y = 32.00U = 9.50L = 9.25

230LX = 30.00Y = 32.00U = 9.50L = 9.25

230LSX = 30.00Y = 31.50U = 9.50L = 9.00

BIOFORM

*■ Indicates mould/shade combinations which are available. 17

AnteriorUpper Mould No.

Articulates With AnteriorLower

1Indicated for upper denture combinations only. 2Softening the canine cusps may yield the best aesthetic results for certain posteriors.

SUGGESTED ARTICULATIONS AND COMBINATIONS

632632634632632634630630630630632632634634634632630630632634632634632630632634632632634630630632632634630632632632634630632630632632630630634634634630634630632630632

732732734732732734730730730730732732734734734732730730732734732734732730732734732732734730730732732734730732732732734730732730732732730730734734734730734730732730732

Portrait 0°Portrait 40°EuroLine

230L233L233M, 233L230L, 233M233M233M230M230L230L230L233L230L233L233L233M, 233L233M230M230L233M233L230L233M233L230M230M233M230L233M233L230L230L230L233M233L230L230L230L233M233L230M 230L230M230L233M230L230L233L233M233M, 233L230L233L230L230L230M230L

Portrait/Bioform IPN33°

31L33M33M, 35M1

31M31M, 31L33M31S, 31M31M29M, 29L29L31L, 33L31M, 31L33L33L33M, 35M31M29M29L31M33M31M33M31L, 33L29M31M33M31M, 31L33M35M29M, 31M29M, 29L31M31M, 33M33L29M, 29L31M31M31L33M29M31L29M31M31M, 33M29L31M, 31L33M, 35M33M33M, 33L29M, 29L33M, 33L29L31M29M31M

Portrait/Bioform IPN20°

332332334, 3361

332332334330330330330332332334334334, 336332330330332334332334332330332334332332336330330332332334330332332332334330332330332332330330334, 336334334330334, 336330332330332

Portrait 10°/Bioform IPNAnatoline

11D11G11H12E12F12G13D13E21C21D21E21F21G21H21J21X22C22E22G22H24F25G31F32B32E32G35E36F41J2

42C42D42F42G42H43D43F44E45F45H52C54F55D55F56G62D62E62G65G65H74E74H75E75G76DA84

BIOFORM® IPN® ANTERIOR MOULD/SHADE AVAILABILITY*

100 102* 104 106 108 109 110 112 113 114 116 118B59 B66 B66 B65 B67 B56 B56 B56 B94 B83 B84 B85

B59 B66 B66 B65 B67 B67 B65 B65 B69 B81 B81 B81B65

P11 P21 P2 P65 P3 P67 P14 P66 P34 P81 - P4P59 P62 P69

ADDITIONAL BIOBLEND® SHADE REFERENCE CHART

Bioform IPN 0°Monoline

Portrait/Bioblend IPN22° BioStabil

BioformIPN PT 30°

ERS, WM, NNG, R, VB, CHCFOLWUI, K1, Rx, ZPCHO, PPF, G, HRJ, O, P, SCHSGN, XI, K1, RxCFHO, PSCM, N, XFJ, OR, VC, DJ, NEMP, VFFK1, R, RxJ, OS, ULK1NR, VCN

431433433431431433431431429429431431433433433431429429431433431433433429431433431433433429429431431433429431431431433429431429431433429431433433433429433429431429431

532532533, 536532532533530530530530532532533533533, 536532530530532533532533532530532533532532536530530532532533530532532532533530532530532533530530533533533530533530532530532

30L32L34M32L32L34M30L, 30LS30L30L30L32L30L34L34L34L32M30M30L32M34L32L34L32L30M32M34L30L32L34L30L30L32L32M34L30L32M32L32L34L30M32L30M32L32M30L30L34L34L32L30L34L30L32L30M32L

Portrait IPN Anteriors

Portrait IPN 40° EuroLine, 33°, 22°BioStabil, 20°, 10° Anatoline, 0° Posteriors

Bioblend IPN Anteriors

Bioblend IPN 22° BioStabil Posteriors

Bioform IPN Anteriors

Bioform IPN 33°, 20°, 10° Anatoline, and0° Monoline Posteriors

Bioform IPN 30° Pilkington-Turner Posteriors

All 27 shades of the Portrait IPN ShadeGuide: P1, P2, P3, P3.5, P4, P11, P12, P13,P14, P21, P22, P23, P24, P32, P33, P34,P59, P62, P65, P66, P67, P69, P77, P81,PW2, PW4, PW7

All 12 blends of the Bioblend Blend Selector:100, 102, 104, 106, 108, 109, 110, 112,113, 114, 116, 118

See Bioform IPN Anterior Mould/ShadeAvailability chart below

All 24 shades of the Bioform Shade Guide:B51, B52, B53, B54, B55, B56, B59, B62,B63, B65, B66, B67, B69, B77, B81, B83B84, B85, B91, B92, B93, B94, B95, B96

Only in Bioform Shades B59, B62, B65,B66, B67, B69, B77 and B81

*Contrasting canine and neck stains in 102 make a match very difficult with BioformBase 8 Shades.

TRUBYTE® IPN® SHADE CONVERSION CHART

For your convenience, the following chart provides a simple reference between several brands of anterior teeth and Vita® shades.

Shade matching is best done with a color corrected fluorescent lighthaving a Color Rendering Index above 90 or in natural daylight.This type of light source was used in our developmental research.For a variety of technical reasons, such as viewing and illuminatingconditions, the perception of the shade match may vary.

Due to distinctive blend and shade characteristics of each brand ofteeth, exact comparisons are not possible.

Portrait®

IPNVita®

ClassicalBioform®

IPNBioblend®

IPNTrublend®

SLM®

P1P2P3P3.5P4

P11P12P13P14

P21P22P23P24

P32P33P34

P59P62P65P66

P67P69P77P81PW2*PW4*PW7*

A1A2A3A3.5A4

B1B2B3B4

C1C2C3C4

D2D3D4

Vita®

3D-Master®

1M13R1.53M23R2.54R1.5

2M12M22M34L2.5

2R1.53L1.5, 4M14L1.5, 4M25M1, 5M2

3M1

1M22L1.5

2L2.5, 2R2.5

2M33L2.5

4M3, 5M30M2, 0M30M1

B51B53B54B83B84

B59B52B55B56

B91B94B95B96

B92B93B69

B59B62B65B66

B67B69B77B81

104108116118

100

110

102

113

100102106112

109113

114

T9T11T13T19T20

T2T22T24T23

T10T6T7T8

T3T14T5

T2T10T15T12

T16T5T17T18

*Portrait white shades PW2, PW4 and PW7 correlate to Illuminé® i-2™, i-4™ and i-7™

respectively.

TRUBYTE, PORTRAIT, IPN, TRUBLEND, SLM, BIOFORM, BIOBLEND, illuminé, the pre-fix “T”, “P” or “i” and a number, are trademarks of DENTSPLY International Inc. VITA®

Classical and VITA® 3D-Master® are not trademarks of DENTSPLY International Inc.

IPN MOULD/SHADE AVAILABILITY CHART

Shade CorrelationShade Match

Bioblend® BlendsBioform® IPN® Anteriorsand IPN Posteriors33°, 20°, 10°, 0°Bioform IPN Posteriors30° Pilkington-Turner®

Portrait® IPN® Anteriorsand Posteriors

Moulds Shades

BIOFORM Color Ordered Shades

LowerAnteriors B51 B52 B53 B54 B55 B56 B59 B62 B63 B65 B66 B67 B69 B77 B81 B83 B84 B85 B91 B92 B93 B94 B95 B96

B ■ ■ ■ ■ ■

C ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

D ■ ■ ■ ■ ■ ■ ■ ■

E ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

F ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

G ■ ■ ■ ■ ■ ■ ■ ■

H ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

J ■ ■ ■ ■ ■ ■ ■ ■

L ■ ■ ■ ■ ■

M ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

N ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

O ■ ■ ■ ■ ■

P ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

R ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

S ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

U ■ ■ ■ ■ ■

V ■ ■ ■ ■ ■

W ■ ■ ■ ■ ■

X ■ ■ ■ ■ ■

K1 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

Mould No.UpperAnteriors B51 B52 B53 B54 B55 B56 B59 B62 B63 B65 B66 B67 B69 B77 B81 B83 B84 B85 B91 B92 B93 B94 B95 B96

11H ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

12E ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

12F ■ ■ ■ ■ ■

12G ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

13D ■ ■ ■ ■ ■

13E ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

21C ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

21D ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

21F ■ ■ ■ ■ ■

21J ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

22E ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

22G ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

24F ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

25G ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

31F ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

32E ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

35E ■ ■ ■ ■ ■

36F ■ ■ ■ ■ ■

42D ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

42F ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

42G ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

43D ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

43F ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

45F ■ ■ ■ ■ ■

45H ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

52C ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

54F ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

55D ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

55F ■ ■ ■ ■ ■

56G ■ ■ ■ ■ ■

62D ■ ■ ■ ■ ■

62E ■ ■ ■ ■ ■

62G ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

65G ■ ■ ■ ■ ■

65H ■ ■ ■ ■ ■

74E ■ ■ ■ ■ ■

74H ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

75E ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

75G ■ ■ ■ ■ ■

76D ■ ■ ■ ■ ■

Trubyte Anteriors Trubyte Posterior Moulds

Non-Anatomical Semi-Anatomical Anatomical

GoodRidge

Deep Cusp

Anatomical

AverageRidge

PoorRidge

ModifiedCusp

FlatPlane

Semi-AnatomicalNon-Anatomical

Once you have selected the upper anterior mould form, simply read across thechart from left to right to combine the suggested corresponding lower anteriorform, as well as the appropriate posterior form for accurate articulation.

CHARTSSHADES

CHARTSARTICULATION AND COMBINATION

REFERENCE G

UIDES

Ipn teeth mold-chart dentsply

Health & Medicine

Transcript of Ipn teeth mold-chart dentsply