IPC Gansow kombimasinad

32
5 T 10 w w w . i p c g a n s o w . c o m Scrubber driers Robust Construction Panel control switches protected against water and humidity Scrubs in difficult to reach areas Great Productivity High quality and performance vacuum motor High Performance Ergonomics, User Friendly Easy to transport Extractable recovery tank Technical data T 10 Scrubbing width mm 250 Suction width mm 260 Productivity (at max speed) m 2 /h 900 Number of brushes 2 (cyl) Solution tank capacity l 5 Recovery tank capacity l 3 Power supply 220 - 240V 50 Hz Max speed Km/h - Weight (net) Kg 15 Dimensions (LxWxH) mm 380x350x370

description

IPC Gansow kombimasinad

Transcript of IPC Gansow kombimasinad

5

T 10

w w w . i p c g a n s o w . c o m

Scrubber driers

Robust Construction

Panel control switches protected against water and humidity

Scrubs in difficult to reach areas

Great Productivity

High quality and performance vacuum motor

High Performance

Ergonomics, User Friendly

Easy to transport

Extractable recovery tank

Technical data T 10Scrubbing width mm 250Suction width mm 260Productivity (at max speed) m2/h 900Number of brushes 2 (cyl)Solution tank capacity l 5Recovery tank capacity l 3Power supply 220 - 240V 50 HzMax speed Km/h -Weight (net) Kg 15Dimensions (LxWxH) mm 380x350x370

w w w . i p c g a n s o w . c o m

6

CT 12Scrubber driers

Robust Construction

Panel control switches protected against water and humidity

Low Maintenance Costs

Brush replacement without tools

Scrubs in difficult to reach areas

Great Productivity

Drying system works both forward and reverse

High Performance

Ergonomics, User Friendly

Easy to transport

Extractable recovery tank

Technical data CT 12Scrubbing width mm 350Suction width mm 420Productivity (at max speed) m2/h 1300Number of brushes 1 (cyl)Solution tank capacity l 12Recovery tank capacity l 13Power supply 220 - 240V 50 HzMax speed Km/h -Weight (net) Kg 32 Dimensions (LxWxH) mm 800x420x420

7

T 15

w w w . i p c g a n s o w . c o m

T15

Scrubber driers

Robust Construction

Panel control switches protected against water and humidity

Low Maintenance Costs

Brush replacement without tools

Drying system works both forward and reverse

High Performance

Scrubs in difficult to reach areas

Great Productivity

Ergonomics, User Friendly

Easy to transport

Extractable solution tank

Extractable recovery tank

Technical data T 15Scrubbing width mm 375Suction width mm 430Productivity (at max speed) m2/h 1300Number of brushes 1 (cyl)Solution tank capacity l 14Recovery tank capacity l 15Power supply 220 - 240V 50 HzMax speed Km/h -Weight (net) Kg 35Dimensions (LxWxH) mm 750x445x370

GANSY 258 Scrubber driers

Huge solution tank capacity in minimum external space

Extensive running time

Solution control with automatic stop (Solenoid valve)

Brush control with automatic delayed stop

Water reusable system

Great Productivity

GANSY 259

Extractable solution tank

Extractable recovery tank

Adjustable handle bar

High Performance

CFS (Center Flow System)

CWS (Constant Weight System)

Exclusive squeegee system assures high performance at low cost

High quality and performance vacuum motor

Scrubber driers

Inlet and outlet filters for maximum solution tank protection

Front cover can be tilted

Brush replacement without tools

Squeegee blade can be used on 4 sides before replacement

Squeegee assembly and blades replacement without tools

Hoses removable without tools

Battery removable without tools

Easy access to internal compartments

Many components removable without tools

Easy access to electric compartment

Low Maintenance Costs

Great manoeuvrability thanks to an optimum weight distribution

Great visibility whilst working

Designed to assure minimum noise levels

Easy to use control panel

Battery level indicator

On board charger can be fitted also at a later stage

External battery charger plug

Ergonomics, User Friendly

Easy to transport

GANSY 2510

Robust Construction

Tanks and surrounding body in high density polypropylene

Oil bath reduction gear box

Squeegee system designed to absorb harsh impact

Panel control switches protected against water and humidity

Scrubber driers

OPTIONAL ACCeSSOrIeS

Front bin rear container

Tissue roller holder rear waste bin

emulsion oil squeegee blade kit On board battery charger

Technical Data Gansy C Gansy BScrubbing width mm 450 450Suction width mm 730 730Productivity (at max speed) m2/h 1575 1575Number of brushes 1 (disc) 1 (disc)Solution tank capacity l 25 25Recovery tank capacity l 25 25Power supply 220V - 50 Hz 12V - 80 AhMax speed Km/h 3,5 3,5Weight (net) Kg 45 45Lenght mm 1090 1090Width mm 525 525Height mm 950 950

w w w . i p c g a n s o w . c o m

GANSY 2511

Detergent delivery and delayed brush autostop 

The flow of detergent starts and stops according to brush operation, avoiding waste.Brush rotation stops after three seconds and starts up again when the handlebar control is pressed. Preserves the brush and the surface to be washed. Adjustable handle height.

reusable water system

The detergent and dirty water tanks canbe removed and transported.25 litres capacity each.Easy to fill, empty and clean.Inflow and outflow filters on the detergent tank protect the machine’s internal circuits.

High performance washing and suction motor

High quality suction motor and high performance thanks to the larger internal manifold. Exclusive IPC Gansow squeegee guarantees high performance and low cost. Rear suction hose with built-in siphon. Prevents dropsof water falling on the ground when thesuction motor is turned off.

easy to transport

Easy to transport.Weights less than 50 kg without battery.Can be stored in a small space:• Width 95 cm• Height 61 cm• Depth 55 cmHoses, battery and other componentscan be removed without tools.Easy to take apart and remount.

extensive running time

Long running time at 12 V with batteries up to 95 Ah, allowing more than an hour of constant work. About four full tanks! Alsoavailable with battery charger on board.

CWS (Constant Weight System)

Selflevelling brush with gas piston, the head floats on the floor guaranteeing maximum cleaning efficiency at all times. Cleaning strip 45 cm wide with thewashing power of a brush with morethan 57,000 bristles.

Scrubber driers

F 36

w w w . i p c g a n s o w . c o m

12 Scrubber driers

Solution distribution from brush center

Exclusive squeegee systemassures high performance at low cost

High Performance

Ergonomics, User Friendly

Easy to use control panel

Robust Construction

Brush head designed to absorb harsh impact

Low Maintenance Costs

Brush replacement without tools

Squeegee assembly and blades replacement without tools

Technical data F36 C F36 BScrubbing width mm 500 500Suction width mm 815 815Productivity (at max speed) m2/h 1500 1500Number of brushes 1 (disc) 1 (disc)Solution tank capacity l 36 36Recovery tank capacity l 37 37Power supply 220 - 240V 50 Hz 24V (2x12V)Max speed (traction type) Km/h 3 (mechanical) 3 (mechanical)Weight (net) Kg 67,5 65Dimensions (LxWxH) mm 960x500x855 960x500x855

13

CT 40Scrubber driers

Huge solution tank capacity in minimum external space

Extensive running time (Large battery compartment)

Solution control with automatic stop

Available also with electric powerd traction (BT version)

Brush control with automatic “delayed” stop

Great Productivity

14

CT 40

High Performance

Solution distribution from brush center

CWS (Constant Weight System)

Exclusive squeegee system assures high performance at low cost

High quality and performance vacuum motor

Scrubber driers

Inlet and outlet filters for maximum solution tank protection

AFS (Anti Foam System)

Brush replacement without tools

Squeegee blade can be used on 4 sides before replacement

Squeegee assembly and blades replacement without tools

Easy access to internal compartments

Low Maintenance Costs

Great manoeuvrability thanks to an optimum weight distribution

Great visibility whilst working

Designed to assure minimum noise levels

Easy to use control panel

Battery level indicator

Recovery tank discharge point and hose at maximum height

Solution tank can be tilted

On board charger can be fitted also at a later stage

External battery charger plug

Ergonomics, User Friendly

Combined scrubbing-sweeping system that includes debris hopper (R version)

15

CT 40

Robust Construction

Tanks and surrounding body in high density polyethylene

Oil bath reduction gear box

Brush head designed to absorb harsh impact

Squeegee system designed to absorb harsh impact

Panel control switches protected against water and humidity

Scrubber driers

Technical data CT40 C/B 45 (*) CT40 C 50 CT40 C 55 CT40 B 50 CT40 B 55 CT40 BT 50 CT40 BT 55 CT40 BT 55 rScrubbing width mm 450 500 550 500 550 500 550 550Suction width mm 815 815 815 815 815 815 815 816Productivity (at max speed) m2/h 1575 1750 1925 1750 1925 2250 2475 2475Number of brushes 1 (disc) 1 (disc) 1 (disc) 1 (disc) 1 (disc) 1 (disc) 1 (disc) 2 (cyl.)Solution tank capacity l 40 40 40 40 40 40 40 40Recovery tank capacity l 50 50 50 50 50 50 50 50

Power supply 220-240V 50 Hz vers. C24V (2x12V) vers. B 220-240V 50 Hz 220-240V 50 Hz 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V)

Max speed Km/h 3,5 (mechanical) 3,5 (mechanical) 3,5 (mechanical) 3,5 (mechanical) 3,5 (mechanical) 4,5 (electric) 4,5 (electric) 4,5 (electric)

Weight (net) Kg 83 vers. C67 vers. B 83 83 67 68,5 73 74,5 100

Dimensions (LxWxH) mm 1230 x 516 x 960 1230 x 516 x 960 1230 x 516 x 962 1230 x 516 x 960 1230 x 516 x 962 1230 x 516 x 960 1230 x 516 x 962 1190 x 640 x 960(*) The C/B versions are not equipped with solenoid valve.

Cylindrical brushes version

16

w w w . i p c g a n s o w . c o m

CT 40

reCOverY

SOLuTION

exclusive squeegee system assures high performance at low cost

Incomparable drying results even on the most difficult surfaces thanks to a very unique design.

Huge tank capacity in minimum external space

40-50 litre capacity tanks make this model very unique in its category.

Brush control with automaticdelayed stop

Saves brush wear and protects delicate surfaces. Brush rotation stops (3 sec delay) and starts upon brush command.

Water level control on both tanks. Maximum protection for the vacuum motor (water level sensor)

1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full.2. When the dirty water tank is full, the left LED comes on and the vacuum motor shuts down. The right LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.

recovery tank can be tilted

Easy to rinse and clean thanks also to smooth internal finishes.

1

2

Solution control with automatic stop

Saves water and save chemicals. Solution flow stops and starts upon brush command.

Scrubber driers

17

CT 70Scrubber driers

Huge solution tank capacity in minimum external space

Extensive running time (Large battery compartment)

Solution control with automatic stop(Solenoid valve)

Available also with electric powerd traction (BT version)

Brush control with automatic “delayed” stop

Great Productivity

18

CT 70Scrubber driers

High Performance

Solution distribution from brush center

CWS(Constant Weight System)

Exclusive squeegee system assures high performance at low cost

High quality and performancevacuum motor

Inlet and outlet filters for maximum solution tank protection

AFS (Anti Foam System)

Brush replacement without tools

Squeegee blade can be used on 4 sides before replacement

Squeegee assembly and blades replacement without tools

Easy access to internal compartments

Low Maintenance Costs

Great manoeuvrability thanks to an optimum weight distribution

Great visibility whilst working

Designed to assure minimum noise levels

Easy to use control panel

Battery level indicator

Recovery tank discharge point and hose at maximum height

Solution tank can be tilted

On board charger can be fitted also at a later stage

External battery charger plug

Ergonomics, User Friendly

Combined scrubbing-sweeping system that includes debris hopper (R version)

19

CT 70Scrubber driers

Robust Construction

Tanks and surrounding body in high density polyethylene

Oil bath reduction gear box

Brush head designed to absorb harsh impact

Squeegee system designed to absob harsh impact

Panel control switches protected against water and humidity

1 brush version

Technical data CT70 C/B 50 CT70 B55 CT70 C/B60-1 CT70 BT55 CT70 BT60-1 CT70 BT60 CT70 BT70 CT70 BT85 CT70 BT55 rScrubbing width mm 500 550 600 550 600 600 700 850 550Suction width mm 815 815 1010 815 1010 815 1010 1010 816Productivity (at max speed) m2/h 1750 1925 2100 2475 2700 2700 3150 3825 2430Number of brushes 1 (disc) 1 (disc) 1 (disc) 1 (disc) 1 (disc) 2 (disc) 2 (disc) 2 (disc) 2 (cyl.)Solution tank capacity l 70 70 70 70 70 70 70 70 70Recovery tank capacity l 75 75 75 75 75 75 75 75 75

Power supply220-240V - 50 Hz C vers.

24V (2x12V) B vers.24V (2x12V)

220-240V - 50 HzC vers.24V (2x12V) B vers.

24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V)

Max speed Km/h 3,5 (mech.) 3,5 (mech.) 3,5 (mech.) 4,5 (elect.) 4,5 (elect.) 4,5 (elect.) 4,5 (elect.) 4,5 (elect.) 4,5 (elect.)

Weight (net) Kg84,5 B vers.108,5 C vers.

85,586,5 B vers.

110,5 C C vers.91,5 92,5 93,7 94,5 95 100

Dimensions (LxWxH) mm 1215x543x960 1215x543x960 1265x645x960 1230x587x960 1265x645x960 1210x680x960 1220x748x960 1260x893x960 1190x640x960

Cylindrical brushes version

20

w w w . i p c g a n s o w . c o m

CT 70

1

2

Scrubber driers

Water level control on both tanks. Maximum protection for the vacuum motor (water level sensor)

1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full.

2. When the dirty water tank is full, the left LED comes on and the vacuum motor shuts down. The right LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.

reCOverY

SOLuTION

Solution control with automatic stop

Saves water and save chemicals. Solution flow stops and starts upon brush command.

Brush control with automatic delayed stop

Saves brush wear and protects delicate surfaces. Brush rotation stops (3 sec delay) and starts upon brush command.

recovery tank can be tilted

Easy to rinse and clean thanks also to smooth internal finishes.

exclusive squeegee system assures high performance at low cost

Incomparable drying results even on the most difficult surfaces thanks to a very unique design.

Huge tank capacity in minimum external space

70-75 litre capacity tanks make this model very unique in its category.

CT 9021

Huge solution tank capacity in minimum external space

Extensive running time (Large battery compartment)

Solution control with automatic stop(Solenoid valve)

Brush control with automatic “delayed” stop

Great Productivity

Scrubber driers

CT 9022

High Performance

Solution distribution from brush center

CWS(Constant Weight System)

Exclusive squeegee system assures high performance at low cost

High quality and performancevacuum motor

Inlet and outlet filters for maximum solution tank protection

AFS (Anti Foam System)

Brush replacement without tools

Squeegee blade can be used on 4 sides before replacement

Squeegee assembly and blades replacement without tools

Easy access to internal compartments

Low Maintenance Costs

Great manoeuvrability thanks to an optimum weight distribution

Great visibility whilst working

Designed to assure minimum noise levels

Easy to use control panel

Battery level indicator

Recovery tank discharge point and hose at maximum height

Solution tank can be tilted

On board charger can be fitted also at a later stage

External battery charger plug

Ergonomics, User Friendly

Scrubber driers

23

CT 90

Robust Construction

Tanks and surrounding body in high density polyethylene

Oil bath reduction gear box

Brush head designed to absorb harsh impact

Squeegee system designed to absorb harsh impact

Panel control switches protected against water and humidity

Scrubber driers

Technical data CT90 BT60 CT90 BT70 CT90 BT85Scrubbing width mm 600 700 850Suction width mm 816 942 942Productivity (at max speed) m2/h 2700 3150 3825Number of brushes 2 (disc) 2 (disc) 2 (disc)Solution tank capacity l 85 85 85Recovery tank capacity l 90 90 90Power supply 24V (4x6V) 24V (4x6V) 24V (4x6V)Max speed Km/h 4,5 (electric) 4,5 (electric) 4,5 (electric)Weight (net) Kg 97,6 98,4 104Dimensions (LxWxH) mm 1328x680x1025 1358x748x1025 1446x893x1025

BT60 version

24

w w w . i p c g a n s o w . c o m

CT 90

Water level control on both tanks. Maximum protection for the vacuum motor (water level sensor)

1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full.

2. When the dirty water tank is full, the left LED comes on and the vacuum motor shuts down. The right LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.

1

2

reCOverY

SOLuTION

Solution control with automatic stop

Saves water and save chemicals. Solution flow stops and starts upon brush command.

Brush control with automatic delayed stop

Saves brush wear and protects delicate surfaces. Brush rotation stops (3 sec. delay) and starts upon brush command.

recovery tank can be tilted

Easy to rinse and clean thanks also to smooth internal finishes.

exclusive squeegee system assures high performance at low cost

Incomparable drying results even on the most difficult surfaces thanks to a very unique design.

Huge tank capacity in minimum external space

90-95 litre capacity tanks make this model very unique in its category.

Scrubber driers

25

CT 100

High Performance

SLS (Self Levelling System) automatic brush pressure control

High quality and performance vacuum motor

Exclusive squeegee system assures high performance at low cost

Huge solution tank capacity in minimum external space

Extensive running time (Large battery compartment)

Solution control with automatic stop(Solenoid valve)

Brush control with automatic “delayed” stop

Great Productivity

Scrubber driers

PATENTED

26

CT 100

Great manoeuvrability thanks to an optimum weight distribution

Great visibility whilst working

Designed to assure minimum noise levels

Easy to use control panel

Solution tank level indicator

Battery level indicator

Recovery tank discharge point and hose at maximum height

Solution tank can be tilted

External battery charger plug

On board charger can be fitted also at a later stage

Solution tank discharge hose

Ergonomics, User Friendly

Scrubber driers

27

CT 100

Robust Construction

Tanks and surrounding body in high density polyethylene

Oil bath reductiongear box

Brush head designed to absorb harsh impact

Squeegee system designed to absorb harsh impact

Panel control switches protected against water and humidity

Inlet and outlet filters for maximum solution tank protection

AFS (Anti Foam System)

Brush replacement without tools

Squeegee blade can be used on 4 sides before replacement

Squeegee assembly and blades replacement without tools

Easy access to internal compartments

Low Maintenance Costs

Scrubber driers

Technical data CT100 BT 60 CT100 BT 70 CT100 BT 85Scrubbing width mm 600 700 850Suction width mm 950 950 950Productivity (at max speed) m2/h 2700 3150 3825Number of brushes 2 (disc) 2 (disc) 2 (disc)Solution tank capacity l 100 100 100Recovery tank capacity l 110 110 110Power supply 24V (4x6V) 24V (4x6V) 24V (4x6V)Max speed Km/h 4,5 (electric) 4,5 (electric) 4,5 (electric)Weight (net) Kg 162 170 173Dimensions (LxWxH) mm 1572x670x1075 1596x744x1075 1641x880x1075

28

w w w . i p c g a n s o w . c o m

CT 100

Huge tank capacity in minimum external space

100 - 110 litre capacity tanks make this model very unique in its category.

SLS (Self Levelling System) Automatic brush pressure control

Constant brush pressure with immediate reaction. Avoids also excessive brush and actuator wear.

exclusive squeegee system assures high performance at low cost

Incomparable drying results even on the most difficult surfaces thanks to a very unique design.

recovery tank can be tilted

Easy to rinse and clean thanks also to smooth internal finishes.

Solution control with automatic stop

Saves water and save chemicals. Solution flow stops and starts upon brush command.

extensive running time

Extremely large battery compartment allows batteries of up to 320Ah/5h (5,5h running time).

reCOverY

SOLuTION

PATeNTeD

Scrubber driers

29

CT 110Scrubber driers

Huge solution tank capacity in minimum external space

3 solution distribution options: • Standard• Automatic• Economy

Extensive running time (Large battery compartment)

Brush control with automatic “delayed” stop

Great Productivity

High Performance

Pre-programmed working settings

SLS (Self Levelling System) automatic brush pressure control

High quality and performancevacuum motor

Solution distribution from brush center

Exclusive squeegee system assures high performance at low cost

30

CT 110

Detergent tank housing (chem-dose)

Great manoeuvrability thanks to an optimum weight distribution

Great visibility whilst working

Designed to assure minimum noise levels

Designed for maximum comfort

Easy to use control panel

Automatic stop (by comand release) in working mode

Batery level indicator

Solution tank discharge hose

Solution tank can be tilted

Flashing beacon

Ergonomics, User Friendly

External batterycharger plug

On board charger can be fitted also at a later stage

Outlet filter for maximum solution tank protection

AFS (Anti Foam System)

Brush replacement without tools

Squeegee blade can be used on 4 sides before replacement

Automatic squeegeelift in reverse

Squeegee assembly and blades replacement without tools

Easy access to internal compartments

Low Maintenance Costs

Scrubber driers

Provision for on board battery charger

31

CT 110

Robust Construction

Tanks and surrounding body in high density polyethylene

Oil bath reduction gear box

Brush head designed to absorb harsh impact

Squeegee system designed to absorb harsh impact

Panel control switches protected against water and humidity

BT 60 version

Scrubber driers

Technical data CT110 BT 60 CT110 BT 70 CT110 BT 85Scrubbing width mm 600 700 850Suction width mm 815 940 1010Productivity (at max speed) m2/h 3900 4550 5525Number of brushes 2 (disc) 2 (disc) 2 (disc)Solution tank capacity l 110 110 110Recovery tank capacity l 115 115 115Power supply 24 V / 280 Ah 24 V / 280 Ah 24 V / 280 AhMax speed Km/h 6,5 6,5 6,5Weight (net) Kg 209 214 231Dimensions (LxWxH) mm 1504x722x1201 1504x759x1201 1504x909x1201

32

CT 110

1

w w w . i p c g a n s o w . c o m

CHeM-DOSe SYSTeM  (optional) (see page  44)

This innovative technology enables the chemical product to be kept separate from the clean water tank, improving washing and optimising detergent consumption (from 1 - 10% of the water used). The Chem Dose System provides three further options:• Standard: manual regulation• Automatic: the flow of solution is regulated

in proportion to the speed of the machine• economy: minimal detergent delivery

Maximum comfort and extreme ease of use

Very comfortable riding position, thanks to the possibility of adjusting the steering according to the needs of the operator. The control panel is easy and intuitive to use and programme. All devices are clearly visible and easy to reach.

easy access to internal components

- Unscrew bolt to tilt recovery tank sideways- 3 bolts to remove vacuum fan- Squeegee hose removal without tools- Rear solution tank inspection- Easy electro valve inspection- Simple to tilt entire tank body

Water level control on both tanks. Maximum protection for the vacuum motor (water level sensor)

1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full.2. When the dirty water tank is full, theleft LED comes on and the vacuum motorshuts down. The right LED indicates whenthe detergent solution has reached thereserve and there is enough detergent leftfor about two minutes.

extensive running time

Extremely large battery compartment allows batteries of up to 280 Ah (4,5 h running time)

Huge tank capacity in minimum external space

110-115 litre capacity tanks make this model very unique in its category

reCOverY

SOLuTION

2

Scrubber driers

33

CT 160Scrubber driers

Huge solution tank capacity in minimum external space

Extensive running time (large battery compartment)

Solution control with automatic stop(Solenoid valve)

Brush control with automatic “delayed” stop

Great Productivity

PATENTED

High Performance

Pre-programmed working settings

SLS (Self Levelling System) automatic brush pressure control

High quality and performance vacuum motor

Combined scrubbing-sweeping system that includesdebris hopper (R version)

34

CT 160

Great manoeuvrability thanks to an optimum weight distribution

Great visibility whilst working

Designed to assure minimum noise levels

Designed for maximum comfort

Easy to use control panel

Automatic stop (by comand release) in working mode

Batery level indicator

Solution tank discharge hose

Solution tank can be tilted

Flashing beacon

Solution tank level indicator

Ergonomics, User Friendly Robust Construction

Tanks and surrounding body in high density polyethylene

Oil bath reduction gear box

Brush head designed to absorb harsh impact

Squeegee system designed to absorb harsh impact

Panel control switches protected against water and humidity

Inlet and outlet filters for maximum solution tank protection

AFS (Anti Foam System)

Brush replacement without tools

Squeegee blade can be used on 4 sides before replacement

Automatic squeegeelift in reverse

Squeegee assembly and blades replacement without tools

Easy access to internal compartments

Low Maintenance Costs

Scrubber driers

35

CT 160Scrubber driers

CT160 BT75 r version

CT160 BT75 r Sweep version

Technical data CT160 BT 70 CT160 BT 85 CT160 BT 95 CT160 BT 75r CT160 BT 75 rSWeeP 

Scrubbing width mm 700 850 950 750 750Suction width mm 830 1010 1100 1010 1010Productivity (at max speed) m2/h 4550 5525 6175 4875 4875Number of brushes 2 (disc) 2 (disc) 2 (disc) 2 (cyl) 2 (cyl)Solution tank capacity l 145 145 145 145 145Recovery tank capacity l 170 170 170 170 170Power supply 36V 36V 36V 36V 36VMax speed Km/h 6,5 6,5 6,5 6,5 6,5Weight (net) Kg 273 290 292 280 300Dimensions (LxWxH) mm 1720x850x1360 1720x1010x1360 1720x1100x1360 1760x885x1360 1810x1050x1360

36

w w w . i p c g a n s o w . c o m

CT 160

BATTERY LIFE SAVER

IPC Integrated Professional Cleaning

Gansow

Pre-programmed working settings

3 independent programs allow best settings for all types of applications. Solution flow remains adjustable at any time. Each Program can be fully personalized.

SLS (Self Levelling System) Automatic brush pressure control

Constant brush pressure with immediate reaction. Avoids also excessive brush and actuator wear.

Combined scrubbing-sweeping system that includes debris hopper (r version)

Brushes can be dismantled without tools.

Water level control on both tanks. Maximum protection for the vacuum motor (water level sensor)

1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full.2. When the dirty water tank is full, the right LED comes on and the vacuum motor shuts down. The left LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.

extensive running time

Extremely large battery compartment allows batteries of up to 320 Ah (4,5 running time).

Huge tank capacity in minimum external space

145-170 litre capacity tanks make this model very unique in its category.

reCOverY

SOLuTION

1

2

Scrubber driers

PATeNTeD