YIH CHUAN MACHINERYINDUSTRY CO., LTD

YIH CHUAN MACHINERY( JIAXING ) INDUSTRY CO., LTD

EXTRONCNC.com

HEAD QUARTERS40755 No.8, 9th Rd., Taichung Industrial Park, Taichung, TaiwanTel : +886-4-2359-3351Fax : +886-4-2359-0012E-mail : sales@extroncnc.com

CHINA BRANCH314031 No.3198, Zhongshan West Rd., Xiuzhou Industrial Area, Jiaxing, ZhejiangTel : +86-573-8279-9488Fax : +86-573-8279-7299E-mail : yihchuan@extroncnc.com

Copyright © EXTRON All rights reservedE-IAS-ENG-201811

IASiPanel I ntel l igent Assistant System

iPanel Intelligent Assistant System

EXTRON CNC is the professional manufacturer which focus on buildiing machining center.

In 2018 we successfully developed super-convenient operation-software to support

users. The software is designed by conversational editing, easy for operator to manage

the controller program. Through “ Online help ” guideline, no matter junior or senior

operators, everyone could save preparation time easily & enhance the total machining

efficiency. The software also provides the “ trouble-shooting guidelines ”. While alarm

message is coming out, the operator could follow the instruction to solve the problem. In

the meanwhile, lower down the machine's idle time & enhance the machining efficiency.

If alarm continuously happens, please call the local agent directly. In conclusion, all these

functions simplify the machining processes and make the job fast & safe.

All-purpose functions to make work easier, fast and safe.

IAS

Coordinate Setup

Peripheral Equipments

System Setting

Diagnostic Functions

Calculator Type

Magazine Management

Process Parameters

Contact Information

SP. Thermal Compensation

Load Management

Workpiece Measurement

Machining Programs

Manual Documents

Time Based Maintenance

Remote Functions

Tool Length Measurement

Process Counter

I n c r e a s e t h e s p e e d a n d convenience to users looking for centering.

2 Points Center

Parameters Mode Selection

I n p u t t h e m e a s u re d ball diameter D value to measure 2 points and calculate the X / Y angular coordinates.

Plane Measurement

Parameter Adjustment &

Storage

• 2 Points Center

• 3 Points Center

• 4 Points Center

• Rectangular Measurement

• Plane Measurement

• 4 Sides Coordinate ( HMC )

• Restore Factory Parameters

• Parameter Adjustment &

Storage

• Parameters Mode Selection

• Import Process Parameters

Face Milling 1 & 2

• Face Milling

• Rectangle Pocket

• Longitudinal Slot

• Matrix Drilling

• Matrix Boring

• Circular Tapping

• Engraving

• Circul Pocket

• Circular Boss

• Rectangular Boss

• Matrix Tapping

• Circular Drilling

• Circular Boring

D i s p l a y s p i n d l e t o o l / prepared tool pot number and prepared tool number / set big tools.

Input parameters and coordinates, to easily f u l f i l t h e p l a n e y o u want to mill.

After the tool magazine returns h o m e , t o o l n u m b e r s a r e reorganized.

The load monitoring value of each tool can be input. When the actual load exceeds the setting value, the alarm comes up by system.

Size Tools

Magazine Reset

Magazine Service

Tool Monitor

• Size Tools

• Magazine Service

• Tool Data

• Magazine Reset

• Tool Monitor

For parts, saving machining time.

For mold, focusing on the workpiece precision.

Average speed and average performance.

Optimal speed

Optimal Accuracy

Average efficiency

The first 24 tools can be selected at random by the big / small tool button, which can automatically change the adjacent tools of the big tools into empty tools or restore, eliminating the complicated setting process of the big tools.

Display signals of magazine /

arm / spindle status.

Spindle maintenance:

tool clamping / unclamping /

spindle positioning.

Magazine clockwise /

counterclookwise

pot up / down.

Arm clockwise / counter-

clockwise.

For protecting the spindle, it stops right away when tools wear and break.

OPT.

M achinin g Programs Generator

M agazine M anage m ent

Process Para m eters

Coordinate Setup

Store the program and o p t i m a l p a r a m e t e r s of each workpiece to quick restore at any time.

01

02

03

04

Display signals of magazine /

arm / spindle status.

Enable NC settings directly a f t e r m a n u a l t o o l l e n g t h measurement.

Convenient for operators to calculate data. P r o v i d e m o r e

a d v a n c e d a n d convenient tools to c a l c u l a t e d a t a f o r workers.

To be activated along w i t h R e n i s h a w T S 27 tool meusrement system ( optional ).

Automatic Tool Length Setting

Feed Rate Calculator

• Manual Tool Length Setting

• Tool Offset Setting

• Automatic

Tool Length Setting

3-Axis Load Monitor 3-Axis Load Record

Engineering Calculator

• 3-Axis Load Monitor

• 3-Axis Load Record

• Spindle Load Monitor

• Spindle Load Record

• 4/5th-Axis Load Monitor

• 4/5th-Axis Load Record

• Simple Calculator

• Engineering Calculator

• Feed Rate Calculator

• Speed Calculator

Calculater Type

To be activated along with renishaw OMP 40 / 60 workpiece measurment system ( optional ).

After manually measuring the tool, directly enable tool length the corresponding to tool table for users, so as to avoid collision by wrong input.

4/5th-Axis Load Monitor

Spindel Load Monitor

OPT.

OPT.

IAS

Tool Len gth m easure m ent

Work piece M easure m ent

Load Management

Automatically measure the position of the workpiece and offset it to the workpiece coordinate.

05

06

07

08

Manual Tool Length Setting

D i s p l a y m a c h i n e a b n o r m a l m e s s a g e s and troubleshooting m e t h o d s , a n d t h e photo with location in the electrical cabinet to check.

Complete I / O and PMC related signal descriptrons help service people to s l o v e p r o b l e m s quickly in no time.

S t a t i s t i c s f o r t h e p ro c e s s u t i l i z a t i o n r a t e o f a c e r t a i n p e r i o d o r a s i n g l e w o r k p i e c e o n t h e m a c h i n e f o r managers' referance.

Alarm Messages &

Trouble shooting

Process Counter 1~3 Process Utilization Rate

Process Co u nter

D i a g n o s t i c Functions

OPT.

• Process Counter 1

• Process Counter 2

• Process Counter 3

• Process Total Counter

• Process Daily Counter

• Process Utilization Rate

• 4th Axis

• 5th Axis

• Linear Scales

• Tool Length Measurement

• Workpiece Measurement

• Mechanical Input

• Panel Input

• Alarm List

• T List

• Alarm Messages

• Mechanical Output

• Panel Output

• Warning List

• K List

• Rigid Retract

M a c h i n e r u n n i n g t i m e / o p e r a t i n g t i m e / s p i n d l e running time / number of jobs / number of tool changes in the statistical setting cycle.

PMC Parameter list

Spindle Thermal Compensation

Offset the machining coordinates according to the spindle speed / spindle temperature / machine temperature for smooth finish of the workpiece.

Must buy [ Temperature Meter ] and [ Temperature Sensor ] at extra charge as option.

09

10

11 Time Based Maintenance

Peripheral Equipments

Calculate dates needed to be maintained, as well as related text /picture descriptions.

12

13 Contact Information 15

Provide local agent information for instant contact.

Manual Documents M Code ListG Code List

• G Code List

• M Code List

• Machine Catalogues

• Electrical Parts List

• Panel Manuals

16

Machine Catalogues Panel Manuals

Process File Transfer

Alarm Message Notification

Remote Functions

P r o v i d e u s e r s t o monitor the operating status by IAS from the PC side.

When an alarm occurs on the machine, the notification can be sent by setting the e-mail, and the machine status can be instantly mastered even if not by the side of the machine.

A P C c a n t r a n s fe r d i f fe re n t m a c h i n i n g p r o g r a m s t o m u l t i p l e m a c h i n e s , o r t h e m a c h i n i n g p r o g r a m s f r o m multiple machines can transfer b a c k t o a P C f o r u n i f i e d management.

IAS Monitor• Alarm Message Notification

• Process File Transfer

• IAS Monitor

17

Transmission interface can be selected, RS232/CF CARD/DATA SERVO /USB.

Set the buzzer to enable or disable sounds while an alarm o c c u r s o r a p r o g r a m e n d s . How long does it sound? Set O means continuous sound.

A p p r o p r i a t e f u n c t i o n a l p e r m i s s i o n s c a n b e o p e n t o c h a r a c t e r s a c c o r d i n g t o d i f f e r e n t j o b s s u c h a s : Machining programing editors ( User administrator )and loading / unloading workers ( general operators ) etc.

Syste m S ettin g

Buzzer Control

IO Channel Setting

Permission Setting

• Permission Setting

• IO Channel Setting

• Buzzer Control

• System Information

• Engineering Mode

18

D i s p l a y c o n t r o l l e r , i Pa n e l a n d m a c h i n e re lated information.I P a d d r e s s c a n b e set up by the user ' s e n v i r o n m e n t i o n i n iPanel to easily access or transfer programs and alarm notification.

System Information