IP Port Solutions - kesmsb.comsite.kesmsb.com/Clients/kesmsbcom/reefer socket brochure.pdf · 19...
Transcript of IP Port Solutions - kesmsb.comsite.kesmsb.com/Clients/kesmsbcom/reefer socket brochure.pdf · 19...
-
IP Port Solutions For the efficient port
Kejuruteraan Elektrik Suria (M) Sdn. Bhd. 19 Jalan Utarid U5/28 Taman Pinggiran Subang (Mahsing Integrated Industrial Park) Seksyen U5, 40150 Shah Alam Selangor, Malaysia Tel: +60378476657/58 Fax: +60378476621 E-mail: [email protected]
-
Page | 1
Product Introduction
The IP Reefer Socket Series and the IP Alternate Power Series are products with a long history of field operations. The products are designed to weather the harsh environments which they will operate in and will give the end user unrivalled reliability, safety, operational efficiency, durability, and cost savings over the lifetime of the products. All products have been tested, and conform to the following standards: CEE17, IEC309-2, BS4343 and IP66. Every product is put through stringent manufacturing processes and quality assurance to ensure high quality products. IP products offer a variety of technical and safety advantages, and the company invites you to browse through the ranges of products to see just where these advantages are. We offer competitive warranties for all products, and we highly believe in the aim of customer satisfaction.
-
Page | 2
IP Reefer Socket
IP Reefer Sockets are a series of reefer socket solutions that are designed to be tough,
dependable, and long lasting to weather the rigours of port reefer operations. The current range
is constructed from a choice of cast aluminum alloy, and stainless steel. These sockets are coated
with a proprietary paint method that combats the effects of weathering and corrosion.
The use of high strength, high temperature plastics on all electrical and plastic components
reduce the effects of burning, melting, and breakage. This guarantees the operator service
reliability, reduced downtimes, safe operations, and very low replacement rates due to product
breakage.
In addition, provisions for SCADA systems are provided on all interlocking reefer sockets.
The IP Reefer Socket comes in 2 varieties; non-interlocking and interlocking type, each with their
own design advantages. Spare parts are available for all parts used in the sockets.
-
Page | 3
Non-Interlocking Series
The IP Non-Interlocking range is a range that is designed to give the operator flexibility in
creating a multi gang reefer point configuration. Brackets and mounting panels will be designed
based on operator requirements.
IP3211 IP32183
Model: IP3211
Technical Data:
Housing: Cast Aluminum Alloy
Surface Protection: ED Coating and
Marine Painted
Ingress Protection: IP66
Voltage Rating: 380V/440V
Amperage Rating: 32A -3h
3 phase, Earth at 3 O’clock.
-
Page | 4
Model: IP32183 with Isolator
Technical Data:
Housing: Cast Aluminum Alloy
Surface Protection: ED Coating and
Marine Paint
Isolator: Yes
Ingress Protection: IP66
Voltage Rating: 380V/440V
Amperage Rating: 32A -3h
3 phase, Earth at 3 O’clock
Note: For model without isolator, simply
specify model number IP180356 without
isolator
Model: IP32115
Technical Data:
Housing: Cast Aluminum Alloy
Mounting Bracket: Stainless Steel
Outlets: 5
Surface Protection: ED Coating and Marine Paint
Ingress Protection: IP66
Voltage Rating: 380/440V
Amperage Rating: 32A-3h
3 phase, Earth at 3 O’Clock.
-
Page | 5
Interlocking Series
The IP Interlocking range is designed with a mechanically interlocking system to provide safety
during plugging and unplugging of plugs. The sockets also come with an inbuilt circuit breaker,
and provisions for SCADA systems where the operator can remotely monitor the status of the
sockets, the temperature of the reefer container as well as any other additional parameters. The
sockets come in 1, 2, 3 and 4 gang configurations.
Interlocking Mechanism
SCADA
The interlocking mechanism
ensures that the unit can only
be turned on when the plug is
securely plugged into the
socket. Once the unit has
been turned on, the plug
cannot be removed. The plug
can only be removed once
the socket has been turned
off.
SCADA systems are an optional
feature on the IP Reefer Socket
Interlocking Series. The SCADA
system allows the operator to
remotely monitor the health
and operating status of the
reefer socket.
-
Page | 6
Model: IP3216856
Technical Data:
Housing: Cast Aluminum Alloy
Outlet: 1 Gang
Surface Protection: ED Coating and
Marine Paint
Ingress Protection: IP66
Voltage Rating: 380/440V
Amperage Rating: 32A-3h
3 phase, Earth at 3 O’Clock,
Model: IP323218
Technical Data:
Housing: Cast Aluminum Alloy
Outlet: 2 Gang
Surface Protection: ED Coating
and Marine Paint
Ingress Protection: IP66
Voltage Rating: 380/440V
Amperage Rating: 32A-3h
3 phase, Earth at 3 O’Clock
-
Page | 7
Model: IP323218SS
Technical Data:
Housing: Stainless Steel
Outlet: 2 Gang
Surface Protection: ED Coating
and Marine Paint
Ingress Protection: IP66
Voltage Rating: 380/440V
Amperage Rating: 32A-3h
3 phase, Earth at 3 O’Clock
Model: IP3X3216
Technical Data:
Housing: Cast Aluminum Alloy
Outlet: 3 Gang
Surface Protection: ED
Coating and Marine Paint
Ingress Protection: IP66
Voltage Rating: 380/440V
Amperage Rating: 32A-3h
3 phase, Earth at 3
O’Clock
-
Page | 8
Model: IP4X3216
Technical Data:
Housing: Stainless Steel
Outlet: 4 Gang
Surface Protection: ED Coating and
Marine Paint
Ingress Protection: IP66
Voltage Rating: 380/440V
Amperage Rating: 32A-3h
3 phase, Earth at 3 O’Clock
-
Page | 9
Reefer Socket Spare Parts
The following are spare parts for the IP Reefer Socket range. Should any part become damaged
or require replacement, simply contact your nearest dealer for replacements.
Parts: Cover Part Number: IPRSC1
Part: Socket Flange Part Number: IP3281189
Part: Socket Cover Part Number: IP3226592
Part: Socket Interior Assembly Part Number: IP3224888
Part: Power Terminal Block Part Number: 60 Amps 3 Pole: IP PIT/60/3MB 100 Amps 3 Pole: IP PIT/100/3 MB
Part: Handle Part Number: 32
Part: Circuit Breaker Part Number: IP180356 Rated Voltage/Ampere 550V/60A 550V/30-50 A
-
Page | 10
IP Alternate Power Series
The IP Alternate Power series is a plug and receptacle combination that is designed to perform
as backup power to reefer yards, as well as to provide ship to shore power solutions. An
interlocking mechanism provides easy plugging and unplugging, without requiring the use of
force from ground personnel. The use of pilot pins in the receptacle greatly increases safety by
ensuring that the plug is properly inserted before power is transferred. This greatly reduces the
risk or arcing and sparking.
Backup power is provided to the reefer yards by connecting the plug to the existing generators
on the RTG cranes, which is then subsequently connected to the receptacle which then powers
the reefer container yard. This provides an advantage where the port operator will not have to
invest in a backup generator that is both costly and maintenance intensive. By employing the use
of the IP400 Amps series, the port operator is guaranteed a cheaper and more reliable
alternative that can be pressed into action on short notice.
The ship to shore power solution can be employed by transferring power from the shore onto
the ship via the plug and receptacle. This allows the ship to turn their engines off when berthed,
thus reducing the amount of emissions coming from the ship.
-
Page | 11
Model: IP4001M
Technical Data:
Construction: Cast Aluminum
Alloy
Configuration: 3L + N + PE
Max Amperage Rating: 400 A
Rated Voltage: 400VAC – 6h
Frequency: 50 Hz
Ingress Protection: IP66
.
Model: IP4001F
Technical Data:
Construction: Cast Aluminum Alloy
Configuration: 3L + N + PE
Max Amperage Rating: 400 A
Rated Voltage: 400VAC – 6h
Frequency: 50 Hz
Ingress Protection: IP66
.