IoT in Motion: Creation of the “Glass Pipeline”
-
Upload
amy-goggins -
Category
Internet
-
view
570 -
download
3
Transcript of IoT in Motion: Creation of the “Glass Pipeline”
IoT In Mo'on Panel Discussion
IoT in Mo(on Todaythingsareinconstantmo1on,crea1ngtheneedtotrackandtrace,notonlyanitemsloca1on,buttounderstandtheen1rejourney-temperature,pressure,humidity.Todaypallets,cases,cartonsandboxesareallbeingtaggedjoiningtheworldofIoTenableddevices.
TheFocusofthepanelwillbeonarealworlddeploymentbyAirCanada-enablingCargovisibility…highligh1ngtheneed,theintegra1on&thesolu1on-nowandintothefuture
• Speakers• BarbJohnston,ManagerOpera1onalTechnology,AirCanadaCargo• ThomasZurick,Director,UnisysCorpora1on• MikeNicometo,Director,CargoAwareLLC• EricWood,VPProductManagement,PrintedElectronics,RRDonnelley
• Moderator• DavidEagleson,VPofWorldwideSales,Brightvolt-PoweringIoTDevices
4/15/16 www.BrightVolt.com 2
INTERNET OF THINGS RFID DEPLOYMENT CASE STUDY
Barb Johnston
EnterpriseForumCambridge-ConnectedThings2016
MITMediaLab
5April2016
Air Canada Cargo
AC CARGO – RFID GLOBAL DEPLOYMENT
4
• Whyini1ateachange?
ImproveShipmentVisibility
Supporte-commerceIni1a1ves
ReduceHumanFactorErrors
EnhanceU1liza1onofResources
GainCompe11veAdvantage
AC CARGO – RFID GLOBAL DEPLOYMENT
5
• Introduc1onofthenewsolu1onmustbe:
• Buildable• Integratetemperatureandhumiditysensors• Accommodatechangingregulatorymandates-securityandcustoms• InterfacewithEnterpriseSystem-Unisys
• Scalable• Flexiblesolu1onadaptabletowarehousesize,volumeofcargo,laborforce
• Limi1ngtheimpactofopera1onaladop1on• Reduceproceduralburden• U1lizeexis1ngopera1onalprocesses
AC CARGO – RFID GLOBAL DEPLOYMENT
6
• Howweini1atedthechange
ConductRFIDpilot,deliverproofofconcept
Overlaywith
electronicmessages
Mapcurrentprocesses
RFID DEPLOYMENT – BENEFITS
7
• ProcesspreRFIDvsprocesswithRFID
Physicalcaptureanddeliveryofshipmentdata HANDSFREEcaptureanddeliveryof
shipmentdata-Reducesphysicalfootprint
-Improvesdataquality-Informa1onisreal1me
- PhysicalprocessofdatacapturereplacedbyelectronicmessagingpushedbyRFID
-Goodsbuildup-Goodscheck-in- Zerovisibilityreplacedwithreal1meeventcapture-Goodsexportedfromwarehouse-Goodsimportedintowarehouse
RFID DEPLOYMENT – BENEFITS
8
Noalertmessagestoadvisepoten1alerrors
ElectronicALERTmessagingtocorrectorpreventerrors
ULDinBREEZWAY>8HOURS
DESCREPANCYBETWEENLABELSINULDANDTRACKED
ROUTINGMISMATCH–NRTINAFRAULD
CLOSEDULD>24HRS
PARTIALNOTASSOCIATEDTOULD
DESCREPANCYBETWEENPRINTED
VSTRACKED
AVIHUMVALDIPINBREEZWAY>30MIN
DESCREPANCYBETRWEENULDCONTENTAND
TRACKED
DESCREPANCYBETWEENNUMBER
CHECKINANDNUMBERDELIVERED
• ProcesspreRFIDvsprocesswithRFID
RFID DEPLOYMENT- BENEFITS
9
• Shipmentvisibility-CargoAware
• Actualmovementandloca1oncaptured–real1me-• Reducedlostanddelayedshipments• Increasedshipmentvisibility• Proceduralefficiencygainsfromdiagnos1csanalysis
10
• Shipmentvisibility-CargoAware
RFID DEPLOYMENT- BENEFITS
11
• Shipmentvisibility–Unisys
AC CARGO YUL – RFID INSTALLATION
12
MIT April 5, 2016
Thomas Zurick
Director, Logistics Solutions
The Glass Pipeline – IoT in Motion
* Source: IATA e-Freight diagram
Shipper labels each box with an RFID tag for use in transporting across the supply chain
Forwarder associates “house air waybill HAWB” label to the shipper RFID tag
Forwarder consolidates to Carrier Carrier associates “master air waybill” MAWB label to HAWB / RFID tag
Carrier delivers MAWB to Forwarder
Forwarder deconsolidates and delivers HAWB to Consignee
Creating the Glass Pipeline: a single RFID label
© 2016 Unisys Corporation. All rights reserved. 16
Challenges…
• Labeling – the shipper, forwarder, and carrier each have their own label formats and needs – The boxes need a physical label for manual handling purposes – The piece ID association needs to match the RFID label (e.g., if the
shipper thinks piece 1 is the iPhones and piece 2 is the iPads; the forwarder or carrier should not mix them up
– The shipper doesn’t know how the forwarder will consolidate and send it, so the box cannot be pre-labeled with the house air waybill number and master air waybill number
– The manual labor involved with a large number of boxes is significant
© 2016 Unisys Corporation. All rights reserved. 17
Challenges…
• Multiple providers involved in the supply chain • RFID / piece ID tracking capability not everywhere • Too much data at the piece level
© 2016 Unisys Corporation. All rights reserved. 18
Solution
• Flexibility – Start where you can, label when you need to do
• Shipper, Forwarder, Carrier
– Provide web services for interfacing electronically, associating and cross-referencing to the piece ID
– Use scanning or RFID technology appropriately – Design for piece ID visibility loss and re-gaining positive status – Consolidate piece ID data and remove clutter based on the audience
© 2016 Unisys Corporation. All rights reserved. 19
Solution in action
Application function and web service interface to
the supply chain or devices
© 2016 Unisys Corporation. All rights reserved. 20
Solution in action
Application monitoring function and web service interface to automated measurement devices
© 2016 Unisys Corporation. All rights reserved. 21
Benefits
• Security • Safety • Service • Revenue • Competing
MichaelNicometoDirector-CargoAware
Connecting Things through Managed Solutions
IoT in Motion
Improve
Shipment Visibility
Support
e-commerce Initiatives
Reduce
Human Factor Errors
Enhance
Utilization of Resources
Gain Competitive Advantage
We’ve seen the Air Canada use case overview
… and the advanced air cargo Logistics Management System they use …
So, a logical extension to the process is making normal, ‘physical things,
that are not connected via a network or IP address, visible, so we can connect them to the digital world
seamlessly… But how?
By 1st Printing,
Attaching and Associating RFID Labels to
“Physical Things”
We can connect
“Physical Things”
to the
“Digital World”
Then using RFID Readers to read and locate RFID Labels
CargoAware uses a blend of the latest evolving technologies, tailored for each process area and requirement. This, along with special algorithms provides real time data collection from the “Edge of the Business” for product movement, location and even environmental conditions… in many instances as a ‘Hands-Free’ solution. Blending different technologies, from mobile computer terminals, to bar code scanners, to handheld RFID readers, to hands-free RFID readers provides incredible visibility to normally unconnected Physical Things
Real Time Actionable Data across the FULL SUPPLY CHAIN
Seamless messaging and integration across multiple supply chain partners and systems…
IoT in Motion
Improved Efficiency, Safety, Security, Quality and Revenue for Immediate ROI Accurate metrics for continuous process improvement and business intelligence
Our Moderator, Dave Eagleson, constantly reminds us all that, “Capturing a lot of real time edge data is cool, but it is not worth much if the data we collect can’t be made actionable.”
Through detailed data collection and piece level location service, coupled with integrated messaging to air cargo and other logistic provider systems, CargoAware couples information about “Unconnected Physical Things” with the “Digital World’, providing real time actionable data, benefits and competitive differentiation.
Industry Leading Innovation
Printed Electronics and the Future of IoT Eric Wood, VP Product Management Printed Electronics
29 | RR Donnelley | MIT Connected Things 2016
IoT Use Cases
Intranet Of Things…
30 | RR Donnelley | MIT Connected Things 2016
Internet Of Things…
IoT Use Cases
31 | RR Donnelley | MIT Connected Things 2016
I is not simply the Infrastructure needed… • Information
– What, where, who, when
• Insight – Why, what for
• Income – What’s in it for me/you/us?
32 | RR Donnelley | MIT Connected Things 2016
All Things are not the same • The information, insight, and
income drivers are different
33 | RR Donnelley | MIT Connected Things 2016
The future of IoT is mass deployment • And to get there, we’ll need
– Capability • Products that gather and provide the right type of information (RFID, variety of
sensors, real-time reporting, etc.) – Characteristics
• Form factors that match to use cases (labels, tags, cards) – Capacity
• Will there be enough available when I need them? – Cost
• Can I afford to deploy them? Is there an ROI? – Complete Solution
• Supplies information, insight, income
34 | RR Donnelley | MIT Connected Things 2016
How is RR Donnelley supporting IoT? • Implementing a high-volume, flexible production system for
IoT solutions – Printed Electronics combined with a variety of final form factors – Leveraging the best of print with the best of traditional electronics in a
hybrid manufacturing solution • Printed circuits, printed batteries, traditional logic and a mix of sensors
– Building customized solutions based on business needs • Building and supporting data service infrastructure
– From Intranet to Internet, enabling the insights our customers need to drive value with IoT
MIT Enterprise Forum Cambridge Connected Things – 2016
IoT in Motion - Q&A Speakers
• Barb Johnston, Manager Operational Technology, Air Canada Cargo
• Thomas Zurick, Director, Unisys Corporation
• Mike Nicometo, Director, CargoAware LLC
• Eric Wood, VP Product Management, Printed Electronics, RR Donnelley
Moderator
• David Eagleson, VP of Worldwide Sales, Brightvolt-Powering IoT Devices