INVITATION TO TENDER - Bank of India FURNISHING...INVITATION TO TENDER INSTRUCTION TO TENDERERS ......

BANK OF INDIA- BAGAN DADPUR, DISTRICT-MURSHIDABAD STHAPATI

1 | P a g e

INVITATION TO TENDER

INSTRUCTION TO TENDERERS

AND

GENERAL CONDITIONS OF CONTRACT

FOR

INTERIOR FURNISHING WORK OF

BANK OF INDIA- BAGAN DADPUR BRANCH, MURSHIDABAD

ARCHITECTS

STHAPATI

DL 126/3, SALT LAKE, SECTOR-II, KOLKATA-700091.

MOBILE: 9231595296, 9830862564.

E-MAIL: [email protected].

Note: necessary drawing may be collected from Architects Office.

mailto:[email protected]


2 | P a g e

Notice of Invitation of Tender

Sealed Tender on item rate basis are invited from empanelled interior contractors having sound, technical and

financial capacity for the Furnishing Works of BANK OF INDIA- BAGAN DADPUR BRANCH, MALDA

Time of Completion : 4 weeks

Time and date of Submission of : On and before 4:00 P.M on 02-06-2016 at

BANK OF INDIA, SILIGURI ZONAL OFFFICE

Pranami Mandir Road, Siliguri -734001

Opening of tender on : 02-06-2016 at 5.00 p.m

Liquidated Damages for delay : 0.5 %of total value of contract per week up to a maximum

10% of the accepted contract sum.

Defects Liability Period : 12 Months

Validity of the Tender : 4 weeks from the date of submission of tender

Sales Tax. IT. Octroi. Levies : The rates quoted should include excise Sales Tax. It.

Octroi. Levies, Service Tax etc.

Transportation and Lifting of Materials : The rates quoted should include cost of transportation,

Caring, wastages and lifting for all leads, work etc.

Note:

The bank is not bound to accept the lowest tender & reserves the right to accept or reject any or all the tender

without assigning any reason whatever.


3 | P a g e

PROPOSED INTERIOR FURNISHING WORKS FOR BANK OF INDIA, BAGAN DADPUR BRANCH,

MURSHIDABAD

1. Tender are hereby invited on behalf of M/s BANK OF INIDA, Zonal Office, Siliguri to carry out the furnishing

works.

2. Contract document/ consisting of the plans, Complete Specification, the schedule of quantities of the various

classes of work to be done and the set of condition of contract to be complies with by the person whose tenders may

be accepted, which will also found in the form of tenders.

3. Tenders which should always be placed in sealed cover with the name of project written on the envelopes will be

received by BANK OF INDIA, ZONAL OFFICE, siliguri up to 4:00 P.M on 02/06/2016 And will be opened by

him/ authorized office in his office on the same day at 5:00 P.M. The tenders received after the stipulated time will

not be accepted.

4. Tender are to be on the prescribed format which can be obtained from the office of BANK OF INDIA, ZONAL

OFFICE, SILIGURI. The time allowed for carrying out of the work for the Furnishing will be 30 days from the

same day after the date of written orders to commence work.

5. The contractors should quote in figures as well as in words the rate and amount tendered by them. The amount for

each item should be worked out and requisite totals given.

6. When contractors signs a tender in an Indian Language the tendered amount and the total amount tendered should

also be written in the same language. In the case of illiterate contractors the rate or the amounts tendered should be

attested by a witness.

7. Issue of tender form will be upto 2.00 p.m on 02-06-2016.

8. Each tender is to be in a sealed cover super/ scribed “Tender for the Interior Furnishing & Renovationwork for Bank

of India, Bagan Dadpur Branch, Murshidabad, West Bengal”.

9. Clarification, if any to be

Obtained from STHAPATI – AK-66, Saltlakecity, Kolkata-700091. Phone- 9231595296, 9830862564.

11. The contractor, whose tender is accepted will be required to furnished by the way of security deposit by cheque or

bank guarantee for the due fulfillment of his contract, such sum as will amount to:

a) 2% of the estimated cost of work.

12. The acceptance of the tender will rest with BANK OF INDIA, ZONAL OFFICE, SILIGURI. And will not be bound

to accept the lowest tender, and reserve the authority to reject any or all of the tender received without assigning any

reason. All the tender in which any of the prescribe condition are not fulfilled or are incomplete in any respect are

liable to be rejected.

13. Canvassing in connection with tender is strictly prohibited and the tender submitted by the contractor who resort to

canvassing will be liable to rejection.

14. All rate shall be quoted on the proper form of the tender alone.

15. An item rate tender containing percentage below/ above will be summarily rejected. However, where a tender

voluntarily offers a rebate for payment with a stipulated period , this may be considered.

16. On acceptance of the tender, the name of the accredited representatives of the contractor who would be responsible

for taking instruction for the bank/ architect shall be communicated to the bank.

17. Special care should be taken to writ the rates in figure as well as in words and the amount in figures only, in such a

way that inter collation is not possible . The total amount should be written both in figures and in words. In case of

figures the words ‘Rs’ should be written before the figures of rupees and words ‘P’ after the decimal figures. e.g.


4 | P a g e

Rs.2.15 “P” and in case of words. The word ‘ Rupees’ should precede and the word paisa should be written at the

end, unless the rate is in whole rupees and followed by the words ‘only’. It should invariably be upto two decimal

places. While quoting the rate in schedule of quantities the word ‘only’ should be written closely following the

amount and it should not be written in the next time.

18. Sales tax or any other tax on material or on finished works like works contract tax, turnover tax, etc., in respect of

this contract shall be payable by the contractor and the bank will not entertain any claim, whatsoever in this respect.

19. The tender for works shall remain open for acceptance for a period of 4 weeks from the date of opening of tenders.

If any tenderer withdraws his tender before the said period, then the bank shall be at liberty to forfeit the Earnest

Money paid along with the tender.

20. The tender of the work shall not be witnessed by a contractor or contractors who himself / themselves has/have

tendered or who may had/ have tendered for the same work. Failure to observe this condition would render tender of

the contractors tendering as well as witnessing the tender liable to summary rejection.

21. It will be obligatory on the part of the tendered to tender and sign and tender documents for all the component parts

and that, after the work is awarded, he will have to enter into an agreement for each component with the component

authority in the bank.

22. The tender apart from being a component contractor must associate and co-ordinate with the other allied agencies of

the appropriate class.

23. In the event of correction, overwriting, addition occurrence at the time of filling rate in words and figures, the

number of such correction, overwriting, alternation shall be entered at the relevant space marked as “C” , “O” and

“A” in each pages of schedule of quantities.


5 | P a g e

ESTIMATE FOR INTERIOR FURNISHING WORK OF BAGANDADPUR BRANCH PART A: INTERIOR WORK FOR BRANCH

SL. DESCRIPTION UNITS QTY RATE AMOUNT

1 FALSE CEILING

a

Providing , fabricating and erecting lay in type tegular or drop type ARMSTRONG false ceiling of 600 mm x 600 mm grid with approved brand of armstrong. The rate shall include the additional cost of Tee and L supports and other accessories near the ends/ odd size edges/corners. Provide additional length support from the ceiling to the false ceiling grid wherever necessary, making necessary openings for electrical light fittings, alarm detectors and any other fixtures. No extra payment for making openings in the panel/grids for the purpose of light fittings. Item rate shall include all the taxes, transportation, erection, loading and unloading and any other incidental expenditure for completing the work.Making nevessary framwork for AC ducting, if any, and necessary cutout fos, taping and finishing to proper line and level including making grovves and trap doors for ac. unit in 18mm.thk M.r.grade plywood with stainless steel hinges and locks with moulding 1" x1" for edge including finished with white plastic paint. diffusers and light fitting.

Sq.Ft. 604.00

c

GYPBOARD CEILING :Providing and fixing 12.5mm tapered edge Gypboard (confirming to IS: 2095 - 1982) is then screw fixed to existing ceiling section with 25mm drywall screws at 230mm centers. Screw fixing is to be done mechanically either with screw driver or drilling machinewith suitable attachment. The boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound. No extra payment will be made for the cutting of the light points, stain glass , cove lighting, etc.Rate should also include the dismantling of the existing gypboards and extra perimeter channel, ceiling section and hangers if necessary. The joints to be properly mended with papertapes and gypsum compounds, two coats of drywall topcoat all complete.The rate should include the full completion of the ceiling along with levels as per design including acrylic emulsion paint finish.At the time of handing over the site,all necessary repairing workto be considered if required. The work to be completed as per the spec ification, design, drawing and approval of the architect.

Sqft 308

2 WALL PANELLING

Providing and fixing wall panelling consisting of 1 1/2"x 1" finished sal wood section without sap and joints at maximum 2'-0" c/c both horizontally and vertically treatedwith pentapehene pale from STP as antitermite and fire retardent from viper. To be fixed screwed on the existing walls. The frame work to be claded with 6mm BWR ply with 1mm thk laminate of approved colour. The work to be completed in all respect as per drawing, specification and approval of the Architects. The rate shall also include the making of boxes 6" out from the wall surface and also the making of niches 6" deep wherever the design demands

Sqft 352.5

3 PARTITIONS


6 | P a g e

Providing and fixing of 2 1/2" x 2" finished saal wood section without sap and joints at maximum 2'- 0" C/C both horizontaly and vertically treated with pentapehene pale from STP as antitermite and fire reterdant from Viper. To be fixed screwed to the floor and ceiling with MS cleats.The framework will be claded with 6mm thick BWR plywood both sides and finished with 1mm thick approved shade laminate as per design with approved .Extra framework to be fixed for fixing glass.In case of partly glazed and low height partition (4'-0" ) partition, 8mm thick glass to be provided with 3" x 3/4" white beach/white cedar moulding with natural polish all complete. For full height semiglazed partition there will be some totally solid portion to block the vision as required or as per the drawing.The work to be completed as per the specification, design and approval of the Architects.

a Full Blocked Partition SFT 60.80

b Full ht. Partly Glazed Partition(Glass Height 3'-0" to7'0"0 ( UPS Room) SFT 102.00

c Low ht. Partly Glazed Partition (4'-0" ht)(Glass ht. will start from 2'-9" to 4') (work stations)

SFT 70.80

4 PARTITION FOR CASH CABINS

Providing and fixing in position 7'-7" high partly glazed partition for cash cabins as per drawing. including door drawing in frame work at 2' x2' grid (horizontally and vertically) comprising of 2" x1-1/2" finished saal wood section and /or as per frame work shown in the drawings with 6 mm plywood on both sides finished with 1 mm thick laminates of approved shade and colour as shown in drawings.Item to include 8 mm thick glass with etching and forsting as per design and glass with etching and frosting The door will be provided with teak wood louvers finished in melamine polish of matching laminate colour . The door are also to be provided with godrej Night latch. Two wooden trays are also being provided as per drawing Necessary cutouts are to be finished in mirror polish. All exposed teak wood surfaces to be finished in melamine polishof maching laminate colour as directed including all necessary Stainless Steel finish fitting/hardware, door closer,Godrej locks and wood preservative paint etc. as per list of approved metrial and as approved by the project Consultant/bank complete in all respect.

SFT 208.45

5 DOORS

5 Full height partly glazed / Full Blocked door

Providing and fixing solid core flush door of 35mm thick, finished with 1mm thick approved colour laminate.A wooden cover moulding of3"x 3/4" thick white beach/ white ceader with natural polish should be provided for floor spring fitted door. 8mm thick glass with etching (approved design) shall be provided with 1 1/2"x 3/4" thk. white beach/ white ceaderglass moulding (as per approved design) with natural polish for full height partly glazed door. In case of vision panel door 18"x 9" 8mm thick clear glass with mouldingwith natural polish to be provided. The rate shall be inclusive of floor spring (heavy duty), 4" brass hinges, doorstopper, screws, 10" "H" shape brass handle (Kitch) , dead lock of godrej, key hole cover, night latches, tower bolt, door closer of approve make.All edges of the door to be covered with necessary lipping with natural polish. The edges of the door frame shall also be covered with wooden bead and finished with natural polish. The work shoud be completed as per the specification, design, and approval of the architect.


7 | P a g e

Note : Wooden door frame fixed to the wall shall have 4" x 2 1/2" white beach/ white cedar (seasoned) section with natural polish.The doors fitted with door closures shall be provided 3" x 1 1/2" white beach/ white cedar section with natural polish for door frame work

a Full.ht. Partly Glazed door with door frame (3'-0"x 7'-0") Manager's Cabin, and Cash

NO 3

b Full.ht. Partly Glazed door with door frame (2'-6"x 7'-0") UPS Room& Locker room

NO 2

c Solid Core Flush door for manager toilet entrance, Record Room & pantry ( 3'-0"x 7'-0")

NO 3

e Solid flush door finished with prescribed shades of laminates as per design (Cash cabin entrance & Safe Entrance ) 3'-0" x 7'-0"

No. 2

f Wicket door (4'-0"x 2'0") No. 1

5 Full glazed Door

Providing and fixing of fully glazed pivolted door at the main entrance .12mm thk modi guard/saint gobain clear float glass with Company's Logo ( as per design) and S/S matt finish handle (6'-0" long) of neki /haffle make to be fixed onboth sides.The rate should be inclusive of heavy duty floorspring of approved make.The work to be completed in all respect as per design, direction and approval of the architect.

a Main Entrance Door 4'-6' x 7'-0" Sqft. 32

6 ENCASEMENTS FOR MAIN ENTRANCE DOOR

a Encasement for entrance doors with 6 mm ply finished with the desired shades of laminates.(Inside &Outside)

Sqft. 120

MAIN ELECTRIC PANEL ENCASEMENT

b

Providing and fixind main electric panel encasement in position fabricated out of 19mm BWP BB with 1mm thk laminate for top, both sides and front. Encasementwill be having powder coated alluminium louver & 6mm thk glass for seeing the indicator in both pallahs. The exposed surface of 19mm thk BWP BB finished with white beach/white ceader lipping & inside to be enamel painted. The item to be completed in all respect as per design, direction and approval of the architects.

Sqft. 52

7 FURNITURES

7 TABLE

Providing and fixing of tables with 25 mm thick plywood for top and 19 mm thick plywood for all horizontal and vertical members. Telescopic CPU stand/ ready made keyboard tray shall be provided of approved model and make. Foot rest made from TW member of size 4" x 1 1/2 " finished with french polish. All exposed plywood surfaces to be finished with 1mm thick laminate of approved make and shade and all exposed edges of table top and ply verticals shall have TW lipping. All exposed TW sections to be melamined and internal surfaces to have white enamel paint as directed. Item shall include plywood boxin, all necessary hardware and fittings in staineless steel finish, etc. complete in all respects. drawer units (for cerk tables) shall be provided with multipurpose godrej locks in each drawer. Facia of each drawer unit shall be finished with 1 mm thick laminate and all other sides shall be finished with white enamel paint. The drawers will be provided with handles and channels as per approval of the architect.

a Br manager (6'-0"x 3'-0") No. 1


8 | P a g e

b Officer (5'-0"x 2'-6") No. 2

c Clerk & daftary (4'-3" x 2'-0") No. 2

d UPS Table (6'-3" x 2'-0") One end shall have a credenza unit with a drawer and a a storage unit below. The table shall have a Keyboard tray and a CPU trolley.

NO 1

Cash Table

7

Providing and fixing in position cash counter 2'-9" wide as per drawing comprising of the following: 1. working top: made out of 25 mm thick plywood finished with 1 mm thick laminate. outside edge of the working top shall be provided with 1 1/4 "x 1" teak wood moulding finished with melamine polish. Inside edge shall be provided with 1/2" x 1" TW beading patti with melamine polish. 2. Vertical facia (Apron): It is made with 19 mm thick finished with 1 mm thick laminate wit 1 mm thick groove at the joint of laminates of different shades. 3. Vertical Drop (Horizontal Band) : It shall be provided on the facia below the working top made with 19 mm thick plywood finished 1mm thick laminate with provision for concealed light. 1 mm thick grrove shall be provided at the joint of two different shades of laminates. 4. Glazed partition (height 1'-4") : To be provided above working top with 12 mm thick toughenedand frosted glass besides non-transparent film from inside fixed to partition as per fixing details provided by the consultant and to boxing with concealed S.S. finished 'D' brackets.

RFT 10.5

The exposed edges of the glass shall be finished with mirror polish. 5. Transaction top : it shall be provided with 12 mm thick toughened glass(partly glazed and partly frosted) fixed horizontally with concealed stainless steel 'D' bracket. Both exposed edges(inside and outside) shall be moulded and finished in mirror polish. 6. Glazed partition (height 1'-0") : This shall be above the transaction top (in facia) and shall be provided with 12 mm glass with cut out 8" x 4" as per drawing. The edges of the cut out and the top edge of the glass are to be mirror polished and to be fixed to partition as per fixing details and to the boxing with concealed S.S finished 'D' brackets in glass above the slit to be fixed to the partition. 7. 7'-7" high boxing : Size 10" x 10" made out of 19 mm plywood with 1'-6" horizontal extension at the top including providing and fixing 6 mm thick square frosted glass at a height of 5'-11" above finished floor level 8. Boxing (1'-9" high) : Size 5" x 5" made out of 12 mm thick plywood finished with 1 mm thick laminate.

9. Telescopic CPU stand and ready made keyboard tray shall be provided of approved make. 10. Footrest made with T.W member of size 4" x 1 1/2" finished with french polish. 11. Drawer units : This shall be provided as per drawing and each drawer shall have vertical partition for keeping the currency notes and multipurpose godrej locks. Facia of the drawer unit shall be finished with 1 mm thick laminate and all other sides shall be finished with white enamel paint. the drawers shall be provided with handles (stainless steel finish) and channels as per approval of the architect.

7 SIDE UNITS


9 | P a g e

a

Providing and fixing side unit/ back unit made out of 19mm MR block board for top, sides and 6mm thk MR ply for back finish with 1mm thk laminate. The drawers to be made out of 19mm BWR block board in the front cladded with 1mm laminate. Side to be made out of 12mm plywood and bottom, back made out of 6mm plywood and it should play on drawer sliding channel. Drawer and sliding shutter inside to be synthetic enamel painted. The sliding shutter made out of 19mm block board with 1mm laminate finished and should play on alluminium channel all four sides. The necessary godrej multipurpose lock, brass hinges, 4" brass matt finish handle,4" brass matt finish sliding handle etc to be provided. 3"x 1/2" white beach/ white cedar wooden skirting with natural polish to be provided as per matching tone all along the visible areas. Inside of the unit to be synthetic enamel painted in matching tone. All the expose edges of the boards/plywood to be covered with white beach/white ceader lipping/ mouldings with natural polishall completed. side and back unit top will have 1 1/2"x 1" white beach/white ceader moulding with natural polish at front facia. The work to be completed as per specification, design and approval of the architect.

Sqft. 25

7 STORAGES

Providing and fixing storage made out of 19mm MR block board for top, sides and 6mm MR ply for back finished with 1.0mm laminate. The shutter to be made out of 19mm block board with 1mm laminate. The necessary multipurpose locks, 6" brass matt finished handle, brass hinges etc to be provided. 3"x1/2" white beach/white ceader skirting to be provided duly natural polish as per matching tone, Inside of the unit to be synthetic enamel paintedn in matching tone.All the exposes edges of the boards/ plywoods to be covered with white beach / white ceader lipping 1 1/2"x 1" moulding duly natural polish all complete. For full height storage file divider made out of 6mm thk ply to be provided, The work to be completed as per approval and specification of the Architect.

a wall Rack with self (Manager room) & upper banker door Sqft. 16.2

b Upper Banker door with laminated finish& all Hardwaer item. Sqft. 87.5

c Full Height storage (upto 7'-0" high) (1'-6" wide) Sqft. 101.5

d Low Height storage (upto 2'-6" high) (1'-6" wide) Sqft. 84.25

8 WRITING LEDGE (size: 3'-6"x1'-4")

Providing and fixing writing ledge as per design made out of 19mm block board with necessary groves pattern, 1.0mm laminate to be cladded. 18mm thk approved colour italian marble with bull nase moulding (double) at facia to be provided on top of the writing ledge. A divider made of 19mm thk block board to be provided. White beach / white cedar lipping with natural polish to be used in all exposed areas. Inside of writing ledge to be enamel painted.The work to be completed as per design and approved of the architect.

NO 1

9 CHEQUE DEPOSIT BOX

Providing and fixing cheque deposit box made out of 19mm thk block board & finished with 1mm thk laminate and inside to be synthetic enamel painted. A1"high slit & small door with key and locking arrengement to be done for droping and taking out the slips. The work to be completed as per design, direction and approval of the architect.

NO 1

10 SUGGESTION BOX


10 | P a g e

Providing and fixing suggestion box made out of 19mm block board and finished with 1mm thk laminate and inside to be synthetic enamel painted. A 1" high slit & small door with key and locking arrengement to be done for droping and taking out the slips. The work to be completed as per design, direction and approval of the Architects. NO 1

11 SOFT BOARD / NOTICE BOARD

Providing and fixing soft board with necessary framework with 12mm bwp plywood on top 12 jolly board to be fixed finished with fabric @Rs80 , with necessary mouldings duly polished along the periferi.

SFT 24

12 VERTICAL BLINDS

Providing and fixing vertical blinds of 100mm thk (Mac/annums) of approved shade and pattern having handrail made of high strength alluminiun alloyed wall thickness of 1.2mm thk. Handrail to have25mm decorative insert.Control unit shall be ofderlin.The runnerd are also to be a derlin with anti flixtion adhesive.Spacers should be made of stainless steel. fabric should be polyster viscosted/ polyester yarn having protective coating with chemicals for stain resistence and soil repelancy. The rates shall include necessary scotch guard treatment on both sides. The overlaping should be uniform and adequate. Necessary operative arrangements , frames to be provided. The work to be completed as per specification and approval of the architect.

SFT 102

13 CIVILWORK

a

Providing and laying Kota stone platform of 19 mm thick and 2'-0" wide and at 2'-8" high above finished floor level with machine polished edge in the pantry. The rate shall include the profile cutting and fixing of below counter sink and polishing the exposed edges of the stone. A 2" kota stone shall be provided below the moulded edge. The rate shall also include the dismantiling of the exsiting slab and clearing the site of the waste and the debris.

sqft 12

b

Providing of stainless steel sink, faucet and trap fixing in the pantry and wooden overhead cabinet made out of 19 mm thick BWR grade ply and finished with 1mm thick laminate of prescribed shade and all open edges finished with lipping and polished with prescribed polish colour

Ls. 1

c 150 mm. thick brick wall in cement mortar 1:6(1 cement : 6 sand ). Sqft 35

d

6 mm thick Rough plaster in cement mortar 1:4 ( 1 cement : 4 coarse sand ) to wall mixed with water proofing chemicals

SqFt. 80

e plumbing work for pantry with metrial. Ls. 1

TOTAL FOR PART A: INTERIOR WORK FOR BRANCH 0.00

DATE SIGNATURE OF CONTRACTOR


11 | P a g e

10. Clarification, if any regarding drawing to be

Obtained from STHAPATI – AK-66, Saltlakecity, Kolkata-700091. Phone- 9231595296, 9830862564.


12 | P a g e

LIST OF APPROVED MAKE OF MATERIALS FOR BRANCH

SL. NO. ITEMS APPROVED MAKE

1

Wood Frame work /wood section: All Wood Must be well seasoned free from knots, other defects decay and defects due to handling and Transportation. Whever necessary, provide with antitermite Treatment.

Teak wood

2 WoodSkirting/Moulding/Lipping/ Bidding/Door Frame:

Teak wood

3 Wood Preservative: Termiseal by PCI/Bison by British Paint

4 Fire Reterdent Paint Industrial grads of Noble/Viper

5 M R Grade Ply

Sarada Plywood Duro Ply/Green Ply Ecotech/ Century Sainik/URO/Archid Ply/ Mayur Ply/Samrat/ Pines/Times/Century Ply./Sylvan

6 Flush Door Duro/Green/URO

7 Laminate (1.0mm thk) Blue

Greenlam (291 Suede)/century Ply Mica (245 Suede)/Samrat (137 SF Blue)/Merino(21122 Seude Blue)/Optus(SF21)/Amulya(1306)/Associates(U437(1mm)Texture 5101 Electric Blue/Archidply (AS1025 Electric Blue) Timex (163 Sapphire)

ii) Orange

Greenlam (213 Suede)/century Ply Mica (217Classic Orange Suede)/Sunmica/Aica (pp60)Samrat (146 SF Orange)/Merino(21014Classic Orange Seude )/Bloom(5414 SS Fanta)/ Timex (114Orange)


13 | P a g e

iii)Grey Grey Silicon(9850 SF)/Century Ply Mica (734 Redisa Grey suede)/Sunmica/Aica Grey-(SF 1691)/Samrat (4590).

iv)Silver Silver Greenlam (9001 Super Matt)/century Mica (1001 Silver Brush)/800SS Silent Shen Silver/Optus Silver MF/Amulya (10101 MF Silver Foil/ Bloom(8400 SS Silver)?Associates (8001Texture 5102)/FM 7004 Silver Foil.

8 door Closure Godrej/Archi/Sterling(Heavy Duty)

9 Floor Spring Godrej/Archi/Sterling(Heavy Duty)

10 Door Lock/Door Handles Godrej/Hafele/ Hettich/Kich/Doorset/Acme

11 Drawer/Storage Handle Neki/Hassley/EGL

12 Drawer/Storage Lock Godrej

13 Night Latch Godrej

14 Screws GKW/Nettle Fold

15 Hinges CiEF

16 Sliding Telescopic Drawer Channel Ebco

17 Key Board drawer (Metal0 Ebco

18 Telescopic CPU Stand (Metal) Ebco

19 Cable Organiser Ebco

20 Adhesive Fevicol

21 Aluminium Door Frame Jindal

22 Soft Board Jolly Board

23 Vertical Blinds Mac/window Fashion

24 Glass Modi/Ashai/Saint Gobain

25 Paints(Synthetic Enamel/Plustic Emulsion) Asian Paints/Berger/ICI Dulux

26 Mirror Modi/Ashai/Saint Gobain

27 Ceramic Tiles jhonson/Kajaria

28 Vitrified Tiles Euro(Athena) /RAK(OFGY-IMP)/Jhonson Equivalent

29 Tiles Chemical Bal-endute/Litticrete.

30 European WC/Washbasin Hindware/Parryware

31 Sanitary afitting Jaquar/Essco

32 G.I Pipe (Medium) Tata/Jindal/Bansal

33 Cement Ambuja/Laferge/ACC

34 Flase Celling Armstrong, Indian Gypsum Board


14 | P a g e

35 All Other Items not covered Above as per sample approved by Employer /Consultant

INVITATION TO TENDER - Bank of India FURNISHING...INVITATION TO TENDER INSTRUCTION TO TENDERERS ......

Documents

Transcript of INVITATION TO TENDER - Bank of India FURNISHING...INVITATION TO TENDER INSTRUCTION TO TENDERERS ......