INVENTING BEAUTYFUL HAIR FOR YOU - …HairBalance Styling Cream Wax“High-definition without...
Transcript of INVENTING BEAUTYFUL HAIR FOR YOU - …HairBalance Styling Cream Wax“High-definition without...
Beauty Made Possible.
INVENTING BEAUTYFUL HAIRFOR YOU
HairCare Product Lines
HairBalanceUnite the extremes.
04
HairProtectAvoid the unavoidable.
12
HairRepairRepair the irreparable.
16
HairControlControl the uncontrollable.
20
Around the world, notions of beauty are as colorful as the people who pursue them. There is certainly more than just one kind of beauty, and everybody has their own idea of what beauty involves. Although personal definitions may differ, one aspect remains the same: Everyone wants to be beautiful in some way. And that’s what Baycusan® is all about – enabling individual beauty through your products.
Baycusan® is your key ingredient for creating products that enable people to be as beautiful as they would like to be. We are passionate about inventing prod-ucts – for you and together with you – that expand the possibilities for being beautiful. We like to keep raising the bar, re-inventing and perfecting, so that in the end it’s not just products but Beauty Made Possible.
This brochure presents four formulation lines that feature our innovative film-former Baycusan® C 1008. It sets new benchmarks in hair care with out-standing results in protection, repair and style – for beautiful hair, every day.
Hair can be the mirror of one’s soul. Let’s polish and protect it and keep it in balance.
HairBalance HairProtect HairRepair HairControl
HairBalance – Smoothly combining hold and flexibility.
Great hairstyles need strong hold. What’s the point in spending precious time in front of the mirror if the first gust of wind ruins everything? Unfortunately “strong hold” often is associated with an unnatural feeling of stiffness. For a long time, it was either strong hold or lightweight flexibility: Choosing one more or less ruled out the other … until now!
Our new polymer Baycusan® C 1010 enables advanced hair stylingformulations that combine strong hold with a natural & non-tacky feel. The result? Long-lasting, high humidity resistance and best style retention with superior sensory properties, in all climate types – made possible byour HairBalance formulation line!
– HairBalance Styling Cream Wax– HairBalance Matte Styling Wax– HairBalance Style & Care Mousse
Unite the extremes.
5
HairBalanceStyling Cream Wax“High-definition without leaving your hair looking greasy.”
Key Benefits:– Strong hold– Long-lasting style– High humidity resistance– Low tackiness– Creamy texture– Suitable for dry & humide climates
HairBalance HairProtect HairRepair HairControl
6
Formulation: RR 8126
Phase Ingredient % by wt.
A Aqua 53.05
Aminomethylpropanol 0.30
Acrylates/C10-30 Alkyl Acrylate Crosspolymer1 0.10
B
Cera Alba 10.00
Isopropyl Myristate 4.00
Caprylic/Capric Triglyceride 3.00
Tridecyl Trimellitate 2.00
Butyrospermum Parkii (Shea) Butter 2.00
Copernicia Cerafera Cera 2.00
Stearic Acid 2.00
Cetearyl Alcohol 4.00
Ceteareth-25 4.00
C
Methylpropanediol (and) Caprylyl Glycol (and) Phenylpropanol2 1.50
Cyclopentasiloxane (and) Dimethicone/Vinyltrimethylsiloxysilicate Crosspolymer3 7.00
Fragrance 0.05
D Baycusan® C 1010 5.00
100.00
Raw materials: 1 Pemulen® TR-1, Noveon. 2 Dermosoft® OMP, Dr. Straetmans.3 Belsil® RG 100, Wacker.Processing: For phase A, add Aminomethylpropanol to water and mix until homogeneous. Add Acrylates/C10-30 Alkyl Acrylate Crosspolymer and mix until dispersed. Heat to 80 °C and maintain at that temperature. Combine all ingredients in phase B in a seperate vessel and heat to 80 °C. When both phases A and B are at 80 °C, add phase B to phase A and mix homogeneous.Adjust pH of the phase A + B mixture 7.0 with Aminomethylpropanol, if necessary. When batch has cooled to 65 °C, add phase C to batch and mix until homogeneous. When batch has cooled to 55–60 °C, add phase D. Cool down and pour into containers.
7
HairBalance Matte Styling Wax“Add the perfect matte finish to your hair style.”
Key Benefits: – Strong hold– Long-lasting style – High humidity resistance– Matte finish– Suitable for dry & humide climates
HairBalance HairProtect HairRepair HairControl
8
9
Phase Ingredient % by wt.
A
Aqua 37.85
Aminomethylpropanol 0.30
Propylene Glycol 2.00
Hydroxyethylcellulose1 0.30
B
Cera Alba 18.00
Isopropyl Myristate 6.00
Butyrospermum Parkii (Shea) Butter 2.00
Copernicia Cerafera Cera 6.00
Stearic Acid 4.00
Kaolin 2.00
Glyceryl Stearate 4.00
Ceteareth-25 4.00
C
Methylpropanediol (and) Caprylyl Glycol (and) Phenylpropanol2 1.50
Cyclopentasiloxane(and) Dimethicone/Vinyltrimethylsiloxysilicate Crosspolymer3 7.00
Fragrance 0.05
D Baycusan® C 1010 5.00
100.00
Raw materials: 1 Tylose® H 100070 NP2, Shin Etsu. 2 Dermosoft® OMP, Dr. Straetmans. 3 Belsil® RG 100, Wacker.Processing: For phase A, add Aminomethylpropanol to water and mix until homogeneous. Add Hydroxyethylcellulose and mix until dispersed. Heat to 80 °C and maintain at that temperature. Combine all ingredients in phase B in a seperate vessel and heat to 80 °C. When both phases A and B are at 80 °C, add phase B to phase A and mix homogeneous. Adjust pH of the phase A + B mixture to 7.0 with Aminomethylpropanol, if necessary. When batch has cooled to 65 °C, add phase C to batch and mix until homogeneous. When batch has cooled to 55–60 °C, add phase D. Cool down and pour into containers.
Formulation: RR 8127
HairBalanceStyle & Care Mousse
HairBalance HairProtect HairRepair HairControl
“For long-lasting hold and conditioning.”
Key Benefits: – Flexible & strong hold– Long-lasting style – High humidity resistance– Frizz control– Low tackiness– Conditioning – Soft feeling on hair– Suitable for dry & humide climates
10
11
Formulation: RR 8128
Phase Ingredient % by wt.
A
Aqua 81.25
Sodium Stearyl Glutamate 0.20
Glycerin 0.10
Aqua (and) Hydrolyzed Keratin 0.40
Sorbitol 1.00
Lauryl Glucoside 0.30
Laureth-4 0.50
Polyquaternium-39 2.50
Panthenol 0.10
Tocopherol Acetate 0.10
Methylpropanediol (and) Caprylyl Glycol (and) Phenylpropanol1 1.50
Amodimethicone 1.00
Fragrance 0.05
Baycusan® C 1010 5.00
BButane 3.00
Propane 3.00
100.00
Raw materials: 1 Dermosoft® OMP, Dr. Straetmans.Processing: Add all ingredients of phase A in a vessel under stirring, at RT. Transfer phase A in a pressure vessel. Inject under pressure phase B at RT to the pressure vessel.
HairProtect – Superior protection against heat damage.
Straightening hair opens up a whole new world of styling possibilities, but at what cost? Flat irons inevitably damage hair with high heat, and it goes without saying that the damage gets worse the more regularly it occurs. Well, sometimes it’s simply a matter of either-or.
Unless you take advantage of our innovative film-former Baycusan® C 1008. It lends hair superior heat protection by shielding it against temperatures of up to 270 °C! At the same time, it provides flexible hold and a perfect finish on dry hair – made by HairProtect formulation line!
– HairProtect HeatFight Spray
Avoid the unavoidable.
HairBalance HairProtect HairRepair HairControl
12
HairBalance HairProtect HairRepair HairControl
Phase Ingredient % by wt.
A
Aqua 84.60
Disodium EDTA 0.50
Acrylates/C10-30 Alkyl Acrylate Crosspolymer1 0.30
Propylene Glycol 3.00
Argania Spinosa Kernel Oil 0.50
BPropylheptyl Caprylate 2.00
Dimethicone 2.00
C
Phenoxyethanol (and) Ethylhexylglycerin2 1.00
Baycusan® C 1008 6.00
Panthenol 0.10
100.00
Formulation: Spray RR 8078
“Stay cool when it gets hot.”
Key Benefits: – Heat protection– Light weight texture– Natural bounce– Anti-frizz (up to 24 hours)– Shine boosting
Raw materials: 1 Pemulen™ TR-2, Lubrizol. 2 Euxyl® PE 9010, Schuelke & Mayr.Processing: Combine phase A at room temperature, stirring rapidly. Add all ingredients of phase B in a separate vessel while stirring. When the phases are uniform, add phase A to phase B, mixing continuously. Add phase C and the emulsion is moderately homogenized. Check pH. If necessary, adjust with Sodium Hydroxide to 5.5.
14
HairProtect HeatFight Spray
15
HairBalance HairProtect HairRepair HairControl
HairRepair – Effective recovery for stressed-out hair and split ends.
Everything has its limits. Sadly, hair is no exception. At some point, it’s stressed-out, overworked and damaged from regular straightening with heat appliances or from coloring products. It becomes brittle, breaks easily and develops split ends.
But now there’s a way out of this misery: Baycusan® C 1008! Applied on a daily basis, it not only visibly repairs split ends, but also restores a healthy overall look and feel – made possible by our HairRepair formulation line!
– HairRepair Extreme Care Spray
Repair the irreparable.
17
HairRepair Extreme Care Spray“The solution – when there is none.”
Key Benefits: – Protects from heat– Increases shine– Effectively repairs split ends– Offers manageable hold
HairBalance HairProtect HairRepair HairControl
18
Phase Ingredient % by wt.
A
Cetearyl Alcohol (and) Ceteth-20 Phosphate (and) DicetylPhosphate1 4.25
C10-30 Cholesterol/Lanosterol Esters2 0.85
Paraffinum Liquidum 6.50
Di-PPG-3 Myristyl Ether Adipate3 2.80
Di-PPG-2 Myreth-10 Adipate4 2.80
Myristyl Myristate 1.00
Dimethicone5 0.75
BAqua 73.59
Sodium Hydroxide (to pH 6.5–7.0) 0.06
C
DMDM Hydantoin6 0.40
Baycusan® C 1008 6.00
Cystine Bis-PG-Propyl Silanetriol7 0.50
Keratin 0.10
Bambusa Vulgaris Shoot Extract8 0.10
Hibiscus Sabdariffa Extract9 0.10
Prunus Cerasus Flower Extract10 0.10
Saccharum Officinarum Extract11 0.10
100.00
Formulation: RR 8063
Raw materials: 1 Crodafos™ CS20A, Croda. 2 Super Sterol Ester, Croda. 3 Cromollient™ DP3A, Croda. 4 Cromollient™ SCE, Croda. 5 Xiameter PMX-200 Silicone Fluid, Dow Corning. 6 Glydant®, Lonza. 7 Crodasone™ Cystine, Croda. 8 Extrapone® Bamboo P, Symrise. 9 Extrapone® Hibiscus, Symrise. 10 Extrapone® Cherry Blossom B, Symrise. 11 Sugar Cane Extract, Premier Specialties.Processing: Heat all ingredients of phase A to 75 °C while stirring. Add phase B in a separate vessel while stirring and heating to 75 °C. When the phases are uniform, add phase A to phase B at 75 °C and mix with moderate agitation for 15 minutes. Cool down to room temperature. Add all ingredients of phase C successively with moderate agitation. Continue mixing until homogeneous. Adjust pH if necessary to 6.5–7.0.
19
HairControl – Fighting frizz and taming wild curls.
What’s the perfect curl? This question might be hard to answer, but there’s definitely no place for frizzy, flyaway hair. Taming frizz, especially when it’s wet outside, will always be a hopeless task – or maybe not?
Baycusan® C 1008 not only succeeds in preventing weather-related frizz all day long, it also creates smooth and well-defined strands. For bouncy, natural curls with a radiant shine – made possible by our HairControl formulation line!
– HairControl Hydracharge Leave-In Cream– HairControl Soft Straightening Balm– HairControl Shine & Style Anti-Frizz Cream– HairControl FrizzFight Cream– HairControl Touch of Magic Spray
Control the uncontrollable.
HairBalance HairProtect HairRepair HairControl
20
22
HairBalance HairProtect HairRepair HairControl
HairControlHydracharge Leave-In Cream“For manageable & healthy hair.”
Key Benefits: – Well-defined curls with natural bounce– Frizz control– Heat protection
23
Phase Ingredient % by wt.
A
Aqua 63.80
Glycerin 3.00
Xanthan Gum 0.20
Microcrystalline Cellulose (and) Algin1 0.50
B
Sweet Almond Oil 2.00
Sorbitan Laurate (and) Polyglyceryl-4 Laurate (and) Dilauryl Citrate2 2.00
Candelilla/Jojoba/Rice Bran Polyglyceryl-3 Esters (and) Glyceryl Stearate (and) Cetearyl Alcohol (and) Sodium Stearoyl Lactylate3
1.00
Cetyl Alcohol 2.00
Caprylyl Caprylate/Caprate 3.00
Coco-Caprylate 5.00
Octocrylene 2.00
Shea Butter 1.00
Methylpropanediol (and) Caprylyl Glycol (and) Phenylpropanol4 1.00
C
Carthamus Tinctorius (Safflower) Seed Oil 1.00
Ethanol Denat. 4.00
Dimethicone5 3.00
Bamboo Extract 0.50
D Baycusan® C 1008 5.00
100.00
Formulation: RR 8129
Raw materials: 1 Avicel® PC 815, FMC Health and Nutrition. 2 Tego® Care LTP, Evonik. 3 Emulium® Kappa 2, Gattefosse. 4 Dermosoft® OMP, Dr. Straetmans. 5 Xiameter® 1.5 cs, Dow Corning.Processing: Combine phase A at 80 °C. Add phase B to phase A and homogenize very strongly for 3 minutes. Stop heating and add ingredients of phase C one after the other. Add phase C, phase D and phase E to phase A + B below 40 °C.
HairControl Soft Straightening Balm
Phase Ingredient % by wt.
A Aqua 47.46
Hydroxyethylcellulose1 1.60
Cetearyl Alcohol 6.00
Dicaprylyl Ether 0.50
B Aqua 36.00
C
Panthenol 0.66
Phenoxyethanol (and) Ethylhexylglycerin2 1.00
Glycerin (and) Butylene Glycol (and) Aqua (and)Avena Sativa3 0.10
Baycusan® C 1008 6.67
Sodium Hydroxide (pH 5.5–6.0) 0.01
100.00
Formulation: RR 8077
“Sleek around the clock.”
Key Benefits: – Straightening– Light texture– Heat protection
Raw materials: 1 Tylose® H 10000 NG4, Shin Etsu. 2 Euxyl® PE 9010, Schuelke & Mayr. 3 Drago-Beta-Glucan, Symrise.Processing: Combine phase A at room temperature and mix thoroughly while stirring. Heat up to 80 °C. Add phase B and start to cool down. At 40 °C add the ingredients of phase C step by step while mixing. Cool down to room temperature while stirring. Check pH. If necessary, adjust with Sodium Hydroxide to 5.5–6.0.
HairBalance HairProtect HairRepair HairControl
24
25
HairBalance HairProtect HairRepair HairControl
26
HairControl Shine & Style Anti-Frizz Cream
Phase Ingredient % by wt.
A
Aqua 87.30
Disodium EDTA (10 wt.% solution) 0.50
Acrylates/C10-30 Alkyl Acrylate Crosspolymer1 0.50
Aminomethyl Propanol 0.50
Propylene Glycol 2.00
Dimethicone2 0.10
Panthenol 0.10
B Baycusan® C 1008 8.00
Phenoxyethanol (and) Ethylhexylglycerin3 1.00
100.00
Formulation: RR 8066
“Don’t frizz out.”
Key Benefits: – Built-in humidity resistance, 24 hours– Anti-frizz– Curl retention– Shine
Raw materials: 1 Carbopol® Ultrez 21, Lubrizol. 2 Xiameter® 1.5 cs, Dow Corning.3 Euxyl® PE 9010, Schuelke & Mayr.Processing: Add phase A and mix thoroughly while stirring until homogeneous. Add phase B to phase A, stirring moderately. Mix until uniform.
27
HairBalance HairProtect HairRepair HairControl
28
HairControl FrizzFight Cream
Phase Ingredient % by wt.
A Aqua 71.40
Xanthan Gum 0.40
B
Cetearyl Alcohol (and) PEG-40 Castor Oil (and) SodiumCetearyl Sulfate1 3.00
Cetearyl Alcohol 6.00
Caprylic/Capric Triglyceride2 4.00
Simmondsia Chinensis Seed Oil 4.00
Avocado Oil 2.00
Argania Spinosa Kernel Oil 0.50
C
Caprylyl Methicone3 1.00
Phenoxyethanol (and) Ethylhexylglycerin4 1.00
Baycusan® C 1008 6.70
100.00
“Simply soothing savage curls.”
Key Benefits: – Built-in humidity resistance, 24 hours– Anti-frizz– Curl retention
Raw materials: 1 Emulgade® F, BASF. 2 Myritol® 312, BASF. 3 Silsoft™ 034, Momentive. 4 Euxyl PE® 9010, Schuelke & Mayr.Processing: Phase A is combined under stirring and homogenizing at RT. Add all ingredients of phase B in a separate vessel under stirring, while heating to 80 °C. When the phases are uniform, phase A is added to Phase B under continuous mixing. The emulsion is homogenized with high shear. At 40 °C ingredients of phase C are added one by one. The emulsion is moderately homogenized. Cool down to room temperature under stirring. Check pH. If necessary, adjust with Sodium Hydroxide to 6.5–7.0. Additional Info: Tested on mulato hair.
Formulation: RR 8088
29
30
HairBalance HairProtect HairRepair HairControl
HairControlTouch of Magic Spray
Phase Ingredient % by wt.
A
Alcohol Denat. 42.63
Baycusan® C 1008 6.67
Panthenol 0.50
Bambusa Vulgaris Shoot Extract 0.20
B Dimethylether 50.00
100.00
Formulation: RR 8047
“The all-in-one solution for any hair affair.”
Key Benefits: – Flexible hold– Shine enhancement– Heat protection– Anti-frizz control
Processing: Add Alcohol and Baycusan® C 1008 in a vessel and stir until uniform.Once in solution, add Panthenol and mix until homogeneous. Filter and fill in aerosol cans. Charge cans with Dimethylether. Additional infos: VOC 50 aerosol formulation. Packaging type: NKPM 425.834 (Coster), Body orifice: 3.9 mm Ø, Stem orifice: 1 x 0.3 mm Ø, Actuator: V21.85/212 (Coster).
31
Covestro Deutschland AGBusines UnitCoatings, Adhesives, SpecialtiesD-51365 [email protected]
This information and our technical advice – whether verbal, in writing or by ways of trial – are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. The information is provided by Covestro Deutschland AG without assumption of any liability. If any of the above mentioned regulations change after the date of declaration, this decla-ration is no longer valid. Covestro Deutschland AG will strive to keep this information up-to-date. Our advice does not release you from the obligation to verify the information provided – especially that contained in our safety data and technical information sheets –, to check for updates of any information provided by us and to test our products as to their suitability for the intended process-es and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with the current version of our General Conditions of Sale and Delivery.Edition: 2016-03 · Order-No.: COV00080302 · Printed in Germany