Introduction to the New Admissions IT Service Request Form
-
Upload
edwin-jackson -
Category
Documents
-
view
22 -
download
0
Transcript of Introduction to the New Admissions IT Service Request Form
INTRODUCTION TO THE NEW ADMISSIONS IT
SERVICE REQUEST FORM
This document outlines how to use the Admissions IT Service Request Form which goes live on Monday, January 5, 2015. It also addresses various issues users may encounter while using the form along with
solutions to these issues, if any.
Page 2 of 36
Page 3 of 36
Introduction
Dear Reader:
As of January 5, 2015, the Admissions IT Department will begin using a new service request log
and, with it, a new service request form. This document has been compiled to provide you with
tips concerning your preparation regarding the use of the new service request form, highlight the
new features of the form, and outline any potential issues you may encounter.
This document is also intended for use by those first gaining access to the Admissions IT
SharePoint Site for the purpose submitting service requests. If you have recently been added to
the Admissions IT SharePoint Group “Outside Admissions with contribute,” please use this
document as a guide when first using the service request form. I hope the information provided
proves helpful.
Sincerely,
Edwin M. Jackson
Page 4 of 36
Page 5 of 36
Contents Introduction...............................................................................................................................3
Accessing the Admissions IT SharePoint Site ..........................................................................7
Known Compatibility Issues between Internet Explorer 11 and SharePoint 2010 ................9
Object doesn’t support property or method ‘addEventListener’ ........................................9
Step 1: Opening the Internet Options Dialogue from the Tools Menu .......................... 10
Step 2: Accessing the Trusted Sites Zone of the Security Tab ....................................... 11
Step 3: Adding the Admissions IT SharePoint Site to the Trusted Sites Zone .............. 12
Step 4: Opening the Compatibility View Settings Dialogue from the Tools Menu ....... 14
Step 5: Adding the University of Houston Domain to the Compatibility View ............. 15
The Admissions IT Service Request Form ............................................................................. 18
The Previous Admissions IT Service Request Form .......................................................... 18
The Current Admissions IT Service Request Form ........................................................... 19
Opening the Admissions IT Service Request Form ............................................................ 20
Warning: An error occurred querying a data source .................................................... 21
Filling Out the Admissions IT Service Request Form ........................................................ 24
Submitting the Admissions IT Service Request Form ....................................................... 26
FYI: Why a “Save” Button and not a “Submit” Button? .............................................. 27
Submitting the Admissions IT Service Request Form (cont’d) ......................................... 28
Versioning on the Admissions IT Service Request Log ................................................. 29
Editing an Admissions IT Service Request List Item ..................................................... 32
Page 6 of 36
Page 7 of 36
Accessing the Admissions IT SharePoint Site
If you are a new hire or otherwise do not have access to the Admissions IT SharePoint site, you
will have to request access by following the instructions in the Microsoft Office Support Article
“Get access to a SharePoint site,” specifically the section Requesting access to a site.
Your request will be referred to the Admissions IT Security Administrator who will then determine
whether or not access will be granted and, if granted, determine what actions you may perform on
the site by assigning a permissions level.
Once you have access, simply navigate to the Admissions IT SharePoint Site and, if prompted,
enter your CougarNet Credentials (i.e. Username and Password). You will then see the
Admissions IT Home Page as viewed below. Your name should appear in the top right corner of
the page.
Figure 1: Admissions IT Home Page
Page 8 of 36
Page 9 of 36
Known Compatibility Issues between Internet Explorer 11 and SharePoint
2010
Object doesn’t support property or method ‘addEventListener’
Before we continue, a known compatibility issue between Internet Explorer 11 and SharePoint
2010 must be addressed. Specifically, users sometimes encounter a Critical Error when attempting
to open the Admissions IT Service Request Form via Internet Explorer 11.
Figure 2: Critical Error, Object doesn’t support property or method ‘addEventListener’
The solution for this error is to have the Admissions IT SharePoint Site load in compatibility mode
when accessed via Internet Explorer 11. Below, you will find the steps necessary to implement
this solution.
Page 10 of 36
Let us begin by going to the Tools Menu and selecting “Internet options.” This will open the
Internet Options Dialogue.
Figure 3: Opening the Internet Options Dialogue from the Tools Menu
Page 11 of 36
With the Internet Options Dialogue window open, click on the Security Tab and select the Trusted
Sites Zone. Click the “Sites” Button to open the Trusted Sites Dialogue.
Figure 4: Opening the Trusted Sites Zone from the Internet Options Dialogue
Page 12 of 36
The domain for the Admissions IT SharePoint Site should automatically appear in the “Add this
website to the zone:” field of the Trusted Sites Dialogue Window if you are performing these
actions while on the Admissions IT SharePoint Site, but if not, type the following:
https://share.uh.edu. Click on the “Add” Button in the dialogue window and the domain should
appear in the “Websites:” field.
Figure 5: Adding the Admissions IT SharePoint Site Domain to the Trusted Sites Zone
Page 13 of 36
Leave the “Require server verification (https:) for all sites in this zone” Checkbox unchecked.
Close the Trusted Sites Zone Dialogue by clicking the “Close” Button and exit the Internet Options
Dialogue by clicking the “OK” Button.
Figure 6: The Admissions IT SharePoint Site Domain Added to the Trusted Sites Zone
Page 14 of 36
We will once again go to the Tools Menu, but this time we will select “Compatibility View
settings.” This will open the Compatibility View Settings Dialogue.
Figure 7: Opening the Compatibility View Settings Dialogue from the Tools Menu
Page 15 of 36
The University of Houston Domain should automatically appear in the “Add this” field of the
Compatibility View Settings Dialogue Window if you are performing these actions while on the
Admissions IT SharePoint Site, but if not, type the following: uh.edu. Click on the “Add” Button
in the dialogue window and the domain should appear in the “Websites you’ve added to
Compatibility View:” field.
Figure 8: Adding the University of Houston Domain to the Compatibility View
Page 16 of 36
Check the “Display intranet sites in Compatibility View” Checkbox and close the Compatibility
View Settings Dialogue by clicking the “Close” Button.
Figure 9: The University of Houston Domain Added to the Compatibility View
And with that you should no longer encounter the Critical Error, “Object doesn’t support property
or method ‘AddEventListener.’”
Page 17 of 36
Page 18 of 36
The Admissions IT Service Request Form
The Previous Admissions IT Service Request Form
Below, you can see the Admissions IT Service Request form in its previous incarnation. You may
have noticed it is long, not intuitive, and even grants access to fields that should only be viewed
by the Admissions IT Staff. It is also not visually appealing.
Figure 9: The Previous Admissions IT Service Request Form
Page 19 of 36
The Current Admissions IT Service Request Form
The current Admissions IT Service Request Form is shorter and has only the fields in which you,
the end user, are interested. You will also note that more fields on the new form are marked as
required (i.e. Marked with a Red Asterisk, “*”) as compared to the previous form. These fields
will have to be filled before the form may be submitted.
Figure 10: The Current Admissions IT Service Request Form
Page 20 of 36
Opening the Admissions IT Service Request Form
Under the Service Request Resources heading of the Quick Launch Bar (i.e. the Left-Hand Pane
of the Admissions IT SharePoint Site), click on the Admissions IT Service Request Form
navigation link. This will open the service request form.
Figure 11: Opening the Admissions IT Service Request Form
Page 21 of 36
When opening the new Admissions IT Service Request Form, you will likely encounter a Warning
Window that says, “An error occurred querying a data source.”
Figure 12: Warning, An error occurred querying a data source
Page 22 of 36
This warning is caused by the inability of the People Picker field to access the User Profile Service
on the SharePoint server. The User Profile Service would be used to pre-populate the People
Picker field with the User Name associated with your CougarNet account. However, after clicking
the “OK” Button, you will notice the People Picker field is blank. This is the only effect of the
error: All other fields within the form should behave normally.
Figure 13: People Picker with No Name Present
Page 23 of 36
Enter your CougarNet user name and click on the “Check Names” Icon and your name will appear
in the field. You will have to perform this action each time you open a new service request form
until such time as the server issue is resolved.
Figure 14: People Picker with Name Present
NOTE: Before my name appeared in the People Picker, I typed my CougerNet Username,
emjackso, and then clicked on the outlined “Check Names” Icon.
Page 24 of 36
Filling Out the Admissions IT Service Request Form
To fill out the service request form, simply make appropriate selections from the drop-down menus
and enter the necessary information in the other fields. If you are not sure what information should
be placed in a certain field, hover over it to display a screen tip. Otherwise, consult with your
superior(s).
Figure 15: Example of a Screen Tip for the Attachments Field
Page 25 of 36
Figure 16: Completed Form before Submission
Page 26 of 36
Submitting the Admissions IT Service Request Form
To submit your completed service request form to the service request log, simply click on the
“Save” Button located at the far left on the ribbon. You will then be notified as to whether or not
your submission was successful.
Figure 17: The “Save” Button
Figure 18: “The form was submitted successfully” Pop-Up Window
Page 27 of 36
Some of you may be wondering why there is a “Save” Button and not a “Submit” Button. After
all, this is a form to submit a request to be addressed by the Admissions IT Department, correct?
This may be the chief reason for the Service Request Log, but this is not what is actually occurring.
The service request log is a list and the service request form is a graphical user interface (GUI)
used to add new items to this list. When you open the service request form, you are creating a new
item on the list. The fields on the service request form represent attributes a single list item may
have. When you fill out the form, you are assigning values to particular attribute for that list item.
And, as this is a new list item, it must be saved to the list and assigned an issue ID.
This is why we see a “Save” Button and not a “Submit” Button on the ribbon.
Page 28 of 36
Submitting the Admissions IT Service Request Form (cont’d)
After saving the new item to the service request log, you will be able to view it in the Admissions
IT Service Request Log as seen below in Figure 18.
Figure 19: Submitted Item in Service Request Log
Page 29 of 36
Notice that versioning is active on the new Admissions IT Service Request Log as indicated by
the list column “Version.” Versioning allows you to see changes via the version history. To open
the version history, click the check box next to the list item for which you wish to view the version
history.
Figure 20: Selecting a List Item
Page 30 of 36
This action will open the List Tools, Items Tab in the ribbon. Click on the “Version History” icon
in the Manage Group and the Version History window will open.
Figure 21: Opening the Version History
Page 31 of 36
From the Version History window, you can view all changes made to various list item attributes,
the date and time such changes were made, and the name of the individual who made the
aforementioned changes. If you wish to know what the value of an attribute was before the change,
simply hover over the change in question and the pervious value will appear.
When you are done reviewing the changes made, close the Version History Window by clicking
the “X” in the upper right corner. Note that you may also delete all versions of a list item, thereby
sending it to the site Recycle Bin and removing the item from the list: THIS SHOULD NEVER
BE DONE!
Figure 22: Closing the Version History Window
Page 32 of 36
If you entered some information in error or made an errant selection in one of the drop-down
menus, you may edit the list item by selecting it as described previously in the Versioning on the
Admissions IT Service Request Log section. Instead of clicking on the “Version History” icon in
the Manage Group of the List Tools, Items Tab, click on the “Edit Item” icon. This will re-open
the service request form for editing.
Figure 23: Editing an Admissions IT Service Request List Item
Page 33 of 36
Make any changes you desire to the list item via the form and click the “Save” Button in the upper
left corner of the Edit Tab in the Admissions IT Service Request Log window when you are done.
You will once again receive a pop-up notifying you of a successful submission.
Figure 24: Saving Your Changes
Page 34 of 36
Page 35 of 36
© 2014 University of Houston. All rights reserved.