Introduction - Furniture Catalogue · PDF fileS STORAGE r r r r r r r r r r r r r r r r r r r...
26
INTRODUCTION: This catalogue has been developed by Campus Planning and Development to assist University staff in identifying and purchasing suitable furniture items for offices, classrooms and shared areas. The aim is to establish a recognisable and consistent furniture standard across campus. All items have been selected based on sustainability, longevity, value for money, usability and efficiency. An extensive process of procurement was completed and all furniture has been preͲapproved by the University, so no further procurement processes are required. In line with the Universitys Sustainability Strategy 2010 2015, purchasing decisions have taken into account the environmental and health impact of the products, as well as their endͲofͲlife disposal. This catalogue has adopted the Good Environmental Choice Australia (GECA) certification across all furniture ranges. GECA is an independent, notͲforͲprofit organisation that oversees the Environmental Choice Australia Labeling Program and provides certification to products that exhibit superior environmental performance. For more information see http://www.geca.org.au/ HOW TO PURCHASE 1. Select the item from the Furniture Catalogue. (If assistance requiredͲ please fill in order form ) 2. Request for quote directly through supplier 3. Seek Business Manager approval 4. Provide the correct Cost Centre number 5. Prior to submitting the order, approval is required from CP&D for quality control. (Please attach the purchase order and order form and email to CP&D: [email protected]/ [email protected]) 6. Request for accessories such as; monitor arm, CPU holder, desk shelving and screens to be directed straight to supplier.
Transcript of Introduction - Furniture Catalogue · PDF fileS STORAGE r r r r r r r r r r r r r r r r r r r...
INTRODUCTION:
This catalogue has been developed by Campus Planning and Development to assist University staff in
identifying and purchasing suitable furniture items for offices, classrooms and shared areas.
The aim is to establish a recognisable and consistent furniture standard across campus. All items have
been selected based on sustainability, longevity, value for money, usability and efficiency.
An extensive process of procurement was completed and all furniture has been pre approved by the
University, so no further procurement processes are required.
In line with the University�‘s Sustainability Strategy 2010 �– 2015, purchasing decisions have taken into
account the environmental and health impact of the products, as well as their end of life disposal.
This catalogue has adopted the Good Environmental Choice Australia (GECA) certification across all
furniture ranges. GECA is an independent, not for profit organisation that oversees the Environmental
Choice Australia Labeling Program and provides certification to products that exhibit superior
environmental performance.
For more information see http://www.geca.org.au/
HOW TO PURCHASE
1. Select the item from the Furniture Catalogue. (If assistance required please fill in �“order form�” )
2. Request for quote directly through supplier
3. Seek Business Manager approval
4. Provide the correct Cost Centre number
5. Prior to submitting the order, approval is required from CP&D for quality control.
(Please attach the purchase order and order form and email to CP&D: [email protected]/
6. Request for accessories such as; monitor arm, CPU holder, desk shelving and screens to be directed
straight to supplier.
TABLE OF CONTENTS
Key:- Student�– S- Staff�– T- Executive�– X- MEETING M
REFERENCENUMBER
TYPE NAME
C CHAIRS
CSA1 STUDENT SLED BASE CHAIR
CSA2 STUDENT TABLET ARM CHAIR
CTA1 BREAKOUT SPACE CHAIR
CTB1 STAFF VISITOR CHAIR
CTC1 STAFF MEETING ROOM CHAIR
CTD1 STAFF CONFERENCE ROOM CHAIR
CTE1 ERGONOMIC OFFICE/ TASK CHAIR
CXA1 EXECUTIVE TASK CHAIR
D DESKS
DSA1 HEIGHT ADJUSTABLE STUDENT DESK(Class room style)
DSB1 FIXED STUDENT DESK(Class room style)
DTA1 FIXED RECTANGLE DESK
DTB1 HEIGHT ADJUSTABLE RECTANGLE DESK
DTC1 HEIGHT ADJUSTABLE WORKSTATION/ DESK
DTD1 HEIGHT ADJUSTABLE WORKSTATION/ DESK
DXA1 EXECUTIVE HEIGHT ADJUSTABLE DESK
DMA1 HEIGHT ADJUSTABLE SIT TO STAND ELECTRIC ANDMANUAL.
DMB1 HEIGHT ADJUSTABLE SIT TO STAND ELECTRIC ANDMANUAL.
S STORAGE
SA1 TAMBOUR CABINET
SB1 BOOKCASE
SC1 LATERAL FILM CABINET
O OTHER
OMA1 MEETING TABLE ROUND/LAMINATED TOP
OMB1 MEETING RECTANGLE TABLE
OMC1 RECTANGLE MEETING TABLE (FLIP UP)
OA1 FREE STANDING SCREENS
OB1 MOBILE PEDESTAL
OC1 EXECUTIVE CUSTOM JOINERY ITEMS
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 1
CONSTRUCTION:
SUSTAINABILITY: 100% recyclable. AFRDI and
GECA approved with 10 year warranty.
FEATURES:
Light weight 3.5kg
Stackable up to 40high
Ergonomically contoured.
Waterfall mesh seat and torsion bar frame
prevents pressure points.
FINISH:
BASE: Available in red, white or black.
SEAT AND BACK:
All red mesh with red sled base and linking glides.
All white mesh with white sled base and linking
glides.
All black mesh with black sled base and linking
glides.
MODEL: Tipo Chair.
SUPPLIER: ZENITH
http://www.zenithinteriors.com.au/
MANUFACTURER : AXONA AICHI
COUNTRY OF MANUFACTURE: JAPAN
NO COMMENTS SIZE
CSA1 DIMENSIONS 520mmWx545mmDx815mmH
SEAT HEIGHT 470mm
CSA1STU
DENTSLED
BASECHAIR
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 2
CONSTRUCTION:
SUSTAINABILITY: 15% Recycled content, 75%
Recyclable). Certified by SCS (indoor advantage), SCS
(BIFMA), MBDC (Cradle to Cradle). Approved with a life
time warranty.
FEATURES:
Polypropylene shell.
Flexible back for relaxed support.
Open seat design offering easy access.
Arms also serve as backpack holders.
Base can facilitate storage for bags etc.
FINISH:
BASE: Tripod base and castors available in platinum,
black and metallic.
SEAT AND BACK:
Available in different colours as desired and approved by
CP&D.
MODEL: NODE
SUPPLIER: STEELCASE AUSTRALIAMANUFACTURER: STEELCASE INC.
COUNTRY OF MANUFACTURE: USA
NO COMMENTS SIZE
CSA2 DIMENSIONS 495mmWx420mmDx464mmH
SEAT HEIGHT 464mm
CSA2STU
DENTTABLET
ARMCHAIR
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 3
CONSTRUCTION:
SUSTAINABILITY: Zero Waste to Landfill (71% Recycled
content, 98% recyclable). AFRDI and GECA approved with
10 year warranty. Green guard Children and Schools
Certified.
FEATURES:
Flexible back for relaxed support.
Ergonomically contoured.
Armrest in black or grey.
Polypropylene shell.
Option for arms, upholstery and painted base.
Light weight stacking 10 high and 40 high on cart.
FINISH:
BASE:Wire sled base �– Trivalent Chrome
SEAT AND BACK:
Available in different colours as desired and approved by
CP&D.
MODEL: �“Very�” Wire Stacking Chair.
SUPPLIER: INO CONTRACT FURNITUREMANUFACTURER : HAWORTH
http://www.haworth.com/en us/Products/Pages/Products.aspx
COUNTRY OF MANUFACTURE: CHINA
NO COMMENTS SIZE
CTA1 DIMENSIONS 554mmWx591mmDx778mmH
SEAT HEIGHT 461mm
CTA1BREAKO
UTSPACE
CHAIR
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 4
NO COMMENTS SIZE
CTB1 DIMENSIONS 597mmWx559mmDx861mmH
SEAT HEIGHT 461mm
CONSTRUCTION:
SUSTAINABILITY: Zero Waste to Landfill (71%
Recycled content, 98% recyclable). AFRDI and GECA
approved with 10 year warranty.
FEATURES: Stackable up to 4 high on floor
And 8 on cart.
Ergonomically contoured.
Armrest in black or grey.
Polypropylene shell.
FINISH:
BASE: 4 leg frame Aluminium
SEAT AND BACK:
Polypropylene available in glacier, slate, grass,
canvass, snow, fog, black, cocoa, tomato and ember.
MODEL: �“Very�” Side Chair.
SUPPLIER: INO CONTRACT FURNITUREMANUFACTURER : HAWORTH
http://www.haworth.com/en us/Products/Pages/Products.aspx
COUNTRY OF MANUFACTURE: CHINA
CTB1VISITO
RCHAIR
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 5
NOTE: SIZES NOT RESTRICTED
CONSTRUCTION:
SUSTAINABILITY: Zero Waste to Landfill (71% Recycled
content, 98% recyclable). AFRDI and GECA approved with
10 year warranty.
FEATURES: Stackable up to 4 high on floor
And 8 on cart.
Ergonomically contoured.
Armrest in black or grey.
Polypropylene shell.
Seat and back upholstery available.
FINISH:
BASE: 4 leg frame Aluminium
SEAT AND BACK:
Polypropylene available in glacier, slate, grass, canvass,
snow, fog, black, cocoa, tomato and ember.
MODEL: �“Very�” Side Chair.
SUPPLIER: INO CONTRACT FURNITUREMANUFACTURER : HAWORTH
http://www.haworth.com/en us/Products/Pages/Products.aspx
COUNTRY OF MANUFACTURE: CHINA
NO COMMENTS SIZE
CTC1 DIMENSIONS 554mmWx678mmDx937mmH
SEAT HEIGHT 521mm
CTC1MEETIN
GRO
OM
CHAIR
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 6
NOTE: SIZES NOT RESTRICTED
CONSTRUCTION:
SUSTAINABILITY: Zero Waste to Landfill (71% Recycled
content, 98% recyclable). AFRDI and GECA approved with
10 year warranty.
FEATURES: Flexible back with intuitive recline.
Ergonomically contoured.
Armrest in black or fog.
Polypropylene shell.
5 star base on castors.
Seat and back upholstery available.
FINISH:
BASE: Aluminium with black or two fog castors.
SEAT AND BACK:
Polypropylene available in glacier, slate, grass, canvass,
snow, fog, black, cocoa, tomato and ember.
MODEL: �“Very�” Conference Chair.
SUPPLIER: INO CONTRACT FURNITUREMANUFACTURER : HAWORTH
http://www.haworth.com/en us/Products/Pages/Products.aspx
COUNTRY OF MANUFACTURE: CHINA
NO COMMENTS SIZE
CTD1 DIMENSIONS 554mmWx678mmDx937mmH
SEAT HEIGHT 521mm
CTD1CO
NFEREN
CECHAIR
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 7
NOTE: SIZES NOT RESTRICTED
CONSTRUCTION:
SUSTAINABILITY: AFRDI and GECA approved with 5
year warranty Green guard certified.
FEATURES:
Slide Seat Instructions �– offering 5 locking
positions larger people more comfort
Ergonomic adjustable back support
Height adj. arm
With or without arms
FINISH:
BASE: Chrome frame, available with brake castors
SEAT AND BACK:
Standard black upholstery, other fabrics available
on request.
MODEL: AXER OFFICE TASK CHAIRS
SUPPLIER: STURDY FRAMA
MANUFACTURER : STURDY FRAMAC
http://www.sturdy.com.au/
COUNTRY OF MANUFACTURE: CHINA
NO COMMENTS SIZE
CTE1 BACK SIZE 430w x 510H
SEAT SIZE 480W x 460D
SEAT HEIGHT 450 x 580
CTE1GEN
ERALTASK
CHAIR
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 8
NOTE: SIZES NOT RESTRICTED
CONSTRUCTION:
SUSTAINABILITY: AFRDI and GECA approved with 5
year warranty Green guard certified.
FEATURES:
Single lever control mechanism
3D dynamic lumber support
4 position adjustable backrest
Multi direction interactive neck support
4D Armrest
FINISH:
BASE: Chrome frame, available with brake castors
SEAT AND BACK:
Standard black upholstery, other fabrics available
on request.
MODEL: lOO MESH
SUPPLIER: STURDY FRAMAC
MANUFACTURER : STURDY FRAMAC
http://www.sturdy.com.au/
COUNTRY OF MANUFACTURE: CHINA
NO COMMENTS SIZE
CXA1 BACK SIZE 520H x 510W
SEAT SIZE 490W x 500D
SEAT HEIGHT 465 x 555
CXA1EXECU
TIVETASK
CHAIR
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 9
NOTE: EXCEPT DEPTH OF 800 SIZES NOT RESTRICTED
CONSTRUCTION:
SUSTAINABILITY: approved with 10 year warranty,100% recyclable content.
FEATURES:Straight edges ( No waterfall)Castors mounted on base and weighing only 20kg.Adjustment range of 400mm
FINISH:BASE AND TABLE TOP:Variety of coloured powder coats available.
MODEL: DRIFT TABLESUPPLIER: INO CONTRACT FURNITUREMANUFACTURER : HAWORTH
http://www.haworth.com/en us/Products/Pages/Products.aspx
COUNTRY OF MANUFACTURE: AUSTRALIA
NO COMMENTS SIZE
DSA1 FIXED HEIGHT 950w x 520d x 700H
DSB1 HEIGHT ADJ. 950w x 520d x 650mm1020mm
DSA1,DSB1STU
DENTDESKS
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 10
NOTE: EXCEPT DEPTH OF 800 SIZES NOT RESTRICTED
NO COMMENTS SIZE
DMB1 FIXEDHEIGHT
800mmD x 1500mmW
CONSTRUCTION:
DESKTOP: Power coated frame with 25mm thickMelamine worktop.SUSTAINABILITY: GECA & AFRDI approved with 10year warranty.FEATURES:- Versatile- Light weight- Designed for disassembly- Small kit of parts- Bench tops and screens can be installed after
wiringFRAME: Powder coated Steel. Available in 120degrees, 90 degrees or 180 degrees.ACCESSORIES: Rumba is available with our S30, S50 and S70 screen systems and isalso compatible with 25mm and 33mm bench tops. Cablemanagement can be contained within the screen in cable ducts withservices mounted above or below the desk. Cable reticulation canalso be provided external to the screen in a segregated cable ductmounted off the desk frame and with services again mounted aboveor below the desk.FINISH: Select from list of provided powder coatsand laminates.MODEL: RUMBA HEIGHT ADJ DESK.SUPPLIER: ZENITHhttp://www.zenithinteriors.com.au/
MANUFACTURER : ZENITHCOUNTRY OF MANUFACTURE: AUSTRALIA
DTA1FIXED
RECTANGLE
DESK
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 11
NOTE: EXCEPT DEPTH OF 800 SIZES NOT RESTRICTED
CONSTRUCTION:
DESKTOP: Power coated frame with 25mm thickMelamine worktop.SUSTAINABILITY: GECA & AFRDI approved with 10year warranty.FEATURES:- Height adjustable- Versatile- Light weight- Designed for disassembly- Small kit of parts- Bench tops and screens can be installed after
wiringFRAME: Powder coated Steel. Available in 120degrees, 90 degrees or 180 degrees.ACCESSORIES: Rumba is available with our S30, S50 and S70 screen systems and isalso compatible with 25mm and 33mm bench tops. Cablemanagement can be contained within the screen in cable ducts withservices mounted above or below the desk. Cable reticulation canalso be provided external to the screen in a segregated cable ductmounted off the desk frame and with services again mounted aboveor below the desk.FINISH: Select from list of provided powder coatsand laminates.MODEL: RUMBA HEIGHT ADJ DESK.SUPPLIER: ZENITHhttp://www.zenithinteriors.com.au/
MANUFACTURER : ZENITHCOUNTRY OF MANUFACTURE: AUSTRALIA
NO COMMENTS SIZE
DMB1 HEIGHTADJUSTABLE
800mmD x 1500mmW
DTB1HEIGHT
ADJ.RECTANGLE
DESK
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 12
NOTE: EXCEPT DEPTH OF 800 SIZES NOT RESTRICTED
CONSTRUCTION:
DESKTOP: Power coated frame with 25mm thickMelamine worktop.SUSTAINABILITY: GECA & AFRDI approved with10 year warranty.FEATURES:- Height adjustable- Versatile- Light weight- Designed for disassembly- Small kit of parts- Bench tops and screens can be installed after
wiring
FRAME: Powder coated Steel. Available in 120degrees or 180 degrees.ACCESSORIES:Rumba is available with our S30, S50 and S70 screen systems andis also compatible with 25mm and 33mm bench tops. Cablemanagement can be contained within the screen in cable ductswith services mounted above or below the desk. Cablereticulation can also be provided external to the screen in asegregated cable duct mounted off the desk frame and withservices again mounted above or below the desk.
FINISH: Select from list of provided powder coatsand laminates.MODEL: RUMBA HEIGHT ADJ WORKSTATION.SUPPLIER: ZENITHhttp://www.zenithinteriors.com.au/MANUFACTURER : ZENITHCOUNTRY OF MANUFACTURE: AUSTRALIA
NO COMMENTS SIZE
DMB1 HEIGHTADJUSTABLE
800mmD x 1500mmW
DTC1HEIGHT
ADJ.WORKSTATIO
N
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 13
NOTE: CUSTOMMADE TO SUITE REQUIREMENTSEXCEPT DEPTH OF 800 SIZES NOT RESTRICTEDOPTIONAL MOBILE PEDESTAL AVAILABLE IF REQUIRED(See under other items)
CONSTRUCTION:
DESKTOP: Melamine worktop 25mm thick,parchment, with ABS edging.SUSTAINABILITY: GECA approved with 10 yearwarranty, recyclable materials and ergonomicallyproduced.FEATURES: Height adjustable desk. Possibleintegrated cable management, quick tointerconnect and adjust, min number of legsallowing max space under table.FRAME: Telescopic steel beam 1400/1800mm.Telescopic hex rod 1400/1800.Wire Basket Length 1400mm white.
ACCESSORIES:Q4 Series LCD Arm: worktop clamp or throughdesk roset. Height Adj. and cable slot.Power frame (clamps to workstations for laptopsand mobile chargers).CPU protector: Height and Width Adj. withsecurity locks.Vesa Lap Top support: ideal for laptop and screenuse.
FINISH: Select from list of provided laminates.MODEL:MO4 DesksSUPPLIER: INO CONTRACT FURNITUREhttp://www.inocontract.com.au/homeMANUFACTURER: MARKANT OFFICE FURNITURE.http://www.markantoffice.com/NL/COUNTRY OF MANUFACTURE:MALAYSIA
NO SIZE COMMENTS
DMB1 1500x800x25mm Fixed Height Desks
DMB1 1500x800x25mm Tech Adj. Desks
DMB1 900x600x25mm Computer TrainingDesks
DMB1 1500x800x25mm Fixed Cluster of 6 MO4
DTD1FIXED/
HEIGHTADJ.DESK
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 14
NOTE: EXCEPT DEPTH OF 800 SIZES NOT RESTRICTED
CONSTRUCTION:
DESKTOP: Laminate or timber veneer worktop,25mm thick, parchment, with ABS edging.SUSTAINABILITY: GECA approved with 10 yearwarranty, Recyclable materials, Inbuilt paper andgeneral waste bins.FEATURES: Integrated cable management, CPU isconcealed in specially designed CPU cabinet,Height adjustable desk with crack handle orelectric motor.STORAGE UNIT: Credenza 1100wx500D575Hwith hinged door CPU unit with ventilation grillsand 2 hinged doors with 1 adjustable shelf.FRAME: Scenario C frame front crank/fixedrectangle handle for top 750 800D.ACCESSORIES:3rd level ring binder storage spacePower frame (clamps to workstations for laptopsand mobile chargers).Vesa Lap Top support: ideal for laptop and screenuse.FINISH: Select from list of provided laminates.MODEL: Scenario Executive DesksSUPPLIER: INO CONTRACT FURNITUREhttp://www.inocontract.com.au/homeMANUFACTURER : MARKANT OFFICE FURNITUREhttp://www.markantoffice.com/NL/COUNTRY OF MANUFACTURE: MALAYSIA
NO COMMENTS SIZE
DMB1 1800x800x25mm MOTORISED OR MANUAL
2100x800x25mm MOTORISED OR MANUAL
DXA1EX
HEIGHTADJ.W
ORKSTATIO
N
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 15
NOTE: EXCEPT DEPTH OF 800 SIZES NOT RESTRICTED
CONSTRUCTION:
DESKTOP: Power coated frame with 25mmthick Melamine worktop.SUSTAINABILITY: GECA & AFRDI approved with10 year warranty.FEATURES:- Height adjustable electric and winder- Versatile- Light weight- Designed for disassembly- Small kit of parts- Bench tops and screens can be installed after
wiring
FRAME: Powder coated Steel. Available in 120degrees or 180 degrees.ACCESSORIES:Rumba is available with our S30, S50 and S70 screen systemsand is also compatible with 25mm and 33mm bench tops.Cable management can be contained within the screen in cableducts with services mounted above or below the desk. Cablereticulation can also be provided external to the screen in asegregated cable duct mounted off the desk frame and withservices again mounted above or below the desk.
FINISH: Select from list of provided powdercoats and laminates.MODEL: RUMBA HEIGHT ADJ WORKSTATION.SUPPLIER: ZENITHhttp://www.zenithinteriors.com.au/MANUFACTURER : ZENITHCOUNTRY OF MANUFACTURE: AUSTRALIA
NO COMMENTS SIZE
DMD1 HEIGHTADJUSTABLEELECTRICAND
MANUAL
1800mm x 850mm
DMA1
SITTO
STANDDESKS
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 16
NOTE: EXCEPT DEPTH OF 800 SIZES NOT RESTRICTED
CONSTRUCTION:
DESKTOP: Melamine worktop 25mm thick,parchment, with ABS edging.SUSTAINABILITY: GECA approved with 10 yearwarranty, recyclable materials andergonomically produced.FEATURES: Height adjustable sit to stand deskwith crack handle or electric motor. Possibleintegrated cable management, quick tointerconnect and adjust, min number of legsallowing max space under table.FRAME: Telescopic steel beam 1400/1800mm.Telescopic hex rod 1400/1800.Wire Basket Length 1400mm white.
ACCESSORIES:Q4 Series LCD Arm: worktop clamp or throughdesk roset. Height Adj. and cable slot.Power frame (clamps to workstations forlaptops and mobile chargers).CPU protector: Height and Width Adj. withsecurity locks.Vesa Lap Top support: ideal for laptop andscreen use.
FINISH: Select from list of provided laminates.MODEL:MO4 DesksSUPPLIER: INO CONTRACT FURNITUREhttp://www.inocontract.com.au/homeMANUFACTURER: MARKANT OFFICEFURNITURE.http://www.markantoffice.com/NL/COUNTRY OF MANUFACTURE: MALAYSIA
NO COMMENTS SIZE
DMD1 HEIGHTADJUSTABLEELECTRICAND
MANUAL
1800mm x 850mm
DMB1
SITTO
STANDDESKS
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 17
CONSTRUCTION:
SUSTAINABILITY: AFRDI and GECA approved. 10
year warranty. 15 20% Recyclable content.
FEATURES:
Fully welded steel body.
High security locking system.
Available with castors.
FINISH: Various colours of powder coats available.
MODEL: S SERIES MOBILE TAMBOUR CABINET
SUPPLIER: PLANEXhttp://www.planex.com.au/index.phpMANUFACTURER: PLANEXCOUNTRY OF MANUFACTURE: AUSTRALIA
NO SIZE COMMENTS
CTC1 Height:770/800/900/1100Depth: 500
S Series Mobile Tambour900 Wide
CTC2 Height:770/800/900/1100Depth: 500
S Series Mobile Tambour1200 Wide
SA1TAM
BOURCABIN
ET
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 18
CONSTRUCTION:
SUSTAINABILITY: AFRDI and GECA approved. 10
year warranty.
FEATURES:
Fully welded steel body.
No assembly required
FINISH: Various colours of powder coats available.
MODEL: S SERIES BOOKCASE
SUPPLIER: PLANEXhttp://www.planex.com.au/index.phpMANUFACTURER: PLANEXCOUNTRY OF MANUFACTURE: AUSTRALIA
NO SIZE COMMENTS
CTB1 Height: 1000/1200/1300/1675/1980Depth: 370/500
S Series Bookcase900 Wide
CTB2 Height:1000/1200/1300/1675/1980Depth: 370/500
S Series Bookcase1200 Wide
SB1METAL
BOOKCASE
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 19
CONSTRUCTION:
SUSTAINABILITY: AFRDI and GECA approved. 10
year warranty.
FEATURES:
Fully welded steel body.
High security locking system.
Adjustable with feet.
FINISH: Various colours of powder coats
available.
MODEL: S SERIES LATERAL FILING CABINET
SUPPLIER: PLANEXhttp://www.planex.com.au/index.phpMANUFACTURER: PLANEXCOUNTRY OF MANUFACTURE: AUSTRALIA
NO SIZE COMMENTS
CTC1 Height: 700Depth: 500Width: 900
S Series Lateral Film �–2 Drawers
CTC2 Height: 1000Depth: 500Width: 900
S Series Lateral Film �–3 Drawers
CTC3 Height: 1300Depth: 500Width: 900
S Series Lateral Film �–4 Drawers
SC1METAL
LATERALFILE
CABINET
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 20
NOTE: SIZES NOT RESTRICTED
CONSTRUCTION:
SUSTAINABILITY: GECA and AFRDI approved with
10 year warranty.
FEATURES:
Meeting table 25mm top, with matching ABS
straight edge. Tetra base, Black column, Aluminium
base with adjustable glides.
FINISH:
BASE AND TABLE TOP: Available in various colours
of laminates and powder coats.
MODEL: Alpine Round meeting table.
SUPPLIER:WORKSPACE.
http://www.workspace.com.au/
MANUFACTURER: WORKSPACE
COUNTRY OF MANUFACTURE: AUSTRALIA
NO COMMENTS SIZE
DMA1 25mmlaminated
Top
1000dia x 25mmtop x720h
OMA1
MEETIN
GRO
UNDTABLE
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 21
NOTE: SIZES NOT RESTRICTED
CONSTRUCTION:
SUSTAINABILITY: GECA and AFRDI approved with
10 year warranty.
FEATURES:
Flip meeting table with matching ABS straight edge.
Folding base, standard powder coat, lockable
castors, nesting setting when standing.
FINISH:
BASE AND TABLE TOP:
Standard laminex commercial palette.
MODEL: ALPINE MEETING TABLE.
SUPPLIER:WORKSPACE.
http://www.workspace.com.au/
MANUFACTURER: WORKSPACE
COUNTRY OF MANUFACTURE: AUSTRALIA
NO COMMENTS SIZE
DMB1 25mmlaminated
Top
1500x900x720h
OMB1
FLIPUPRECTAN
GLETABLE
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 22
CONSTRUCTION:
SUSTAINABILITY: GECA and AFRDI approved with
10 year warranty.
FEATURES:
Meeting table 25mm top, with matching ABS
straight edge. Tetra base, Black column, Aluminium
base with adjustable glides.
FINISH:
BASE AND TABLE TOP: Available in various colours
of laminates and powder coats.
MODEL: ALPINE RECTANGLE MEETING TABLE.
SUPPLIER:WORKSPACE.
http://www.workspace.com.au/
MANUFACTURER: WORKSPACE
COUNTRY OF MANUFACTURE: AUSTRALIA
NO COMMENTS SIZE
DMB1 25mmlaminated
Top
1500x900x720h
DMB2 25mmlaminated
Top
1200x900x720h
OMC1
MEETIN
GRECTAN
GLETABLE
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 23
ZENITH S30 SCREEN:
FEATURES:
Screen with powder coated frame and
laine Suzette fabric as standard range.
(other fabrics available on request) Screen
comes with top capping and end of run
strips as a finished unit. Available in various
colours.
SUPPLIER: ZENITH
MANUFACTURER: ZENITH
COUNTRY OF MANUFACTURE: AUSTRALIA
FREE STANDING SCREEN:
FEATURES:
Upholstered in lain Suzette (other fabrics
available on request). Available in various colours.
SUPPLIER: ZENITH
MANUFACTURER: ZENITH
COUNTRY OF MANUFACTURE: AUSTRALIA
OA1
SCREENS
© UC CAMPUS PLANNING AND DEVELOPMENT P a g e | 24
METAL MOBILE PEDESTAL UNIT:
FEATURES:
660mmHx453mmWx550mmD.
Rectilinear integral handles. Adjustable
drawer divider, ball bearing runner on all
drawers, anti tilt mechanism, slim line top,
and rubber stops on drawer bodies to
prevent slamming. Lockable drawers with
unobtrusive castors. Powder coat finish in
satin white, other colour available on
request. 5 year warranty.
MODEL: Virtu 2 box/ 1 file drawer
SUPPLIER: PLANEX
http://www.planex.com.au/index.phpMANUFACTURER: PLANEXCOUNTRY OF MANUFACTURE: AUSTRALIA
LAMINATED MOBILE PEDESTAL UNIT:
FEATURES: 610mmHx420mmWx540mmD.
Standard 18mm melamine construction. 2
personal + one file drawer. Metal drawers
with ball bearing runners. Gang Lockable, 5
castors for anti tilt. Available in standard
Laminex Commercial Palette. 5 year
warranty.
MODEL: Standard mobile pedestal
SUPPLIER: ZENITH
http://www.zenithinteriors.com.au/MANUFACTURER: ZenithCOUNTRY OF MANUFACTURE: AUSTRALIA
OA2
MOBILE
PEDESTALS
