INTRODUCTION - BlackVel Flexitank Brochure.pdf · underneath the solidified Flexitank. In extreme...
Transcript of INTRODUCTION - BlackVel Flexitank Brochure.pdf · underneath the solidified Flexitank. In extreme...
INTRODUCTION
Cost:Loading / Discharge:Storage Cost:Hygiene:Disposal:
FLEXITANK
FLEXITANK
BlackVel Solutions Pte Ltd is no strangerto bulk packaging. With decades ofexperience in packaging, ourexperienced Management Team strive tobring the most innovative andeconomical bulk packaging for yourindustrial needs.
Since 1970s, Flexitank (which is aspecial bladder that is designed to fitinside a 20FT freight container) has beenused as a carriage for non-hazardousliquid. This unique packaging offersconsiderable savings in transporationcosts and eliminates the possibility ofproducts contamination. Ever since then,more and more companies are changingtheir bulk shipment from traditionalpacking to Flexitank.
Cost: HighLoading / Discharge: DifficultStorage Cost: Very HighHygiene: Risk of ContaminationDisposal: Harmful to Environment
200L Drum
Cost: Very HighLoading / Discharge: Very DifficultStorage Cost: HighHygiene: Risk of ContaminationDisposal: Harmful to Environment
1,000L IBC
Cost: Extremely ExpensiveLoading / Discharge: ModerateStorage Cost: Very very HighHygiene: Risk of ContaminationDisposal: Harmful to Environment
ISO Tanker
Flexitank has proven to be a moreeconomical bulk packaging for thepast decades. Let’s have a look at thea brief illustration on the advantages ofFlexitank compared to other traditionalpackaging.
195, Pearl’s Hill Terrace, #03-31 Singapore 168976 | T: +65-65368220 | F: +65-65362303 | www.blackvel.com
FLEXITANK SPECIFICATIONS
Item: BV Flexitank (Highly Recommended)
Type: Standard
Capacity: 24000L
Specifications: 2 Inner LLDPE (Food Grade)& 1 Layer Outer PP Woven
LLDPE Thickness 350 micron per layer
Bulkhead: PP Woven
Valve Type: 3" Top Load & Discharge / 2" Bottom Load & Discharge
No. Of Valve: 1
Air Vent: Yes
Galvanised Steel Bar: Yes
Accessories: Yes (E.g. Caution Sticker, Cable Tie etc)
Corrugated Paper: Yes
PACKED DIMENSION (ONE FLEXITANK)
Packed Size 113cm x 56cm x 45cm (H)
Weight / Carton Approx 60kg (Flexitank Set Only)
Weight per set(including Metal Bars)
Approx 100kg
Quality ManagementSystem
ISO 9001:2000 Supervision
Insurance Product Liability Insurance
Product Material FDA, EC Standard
Kosher Certificated Yes
QUALITY ASSURANCE
BlackVel carries onestandard Flexitank in our warehouse as we believethat is the best combination of specifications.However, we understand that different companieshave different requirements, we also providecustomise design on the Flexitank to cater fordifferent needs.
SPECIFICATIONS
195, Pearl’s Hill Terrace, #03-31 Singapore 168976 | T: +65-65368220 | F: +65-65362303 | www.blackvel.com
TECHNICAL SPECIFICATIONS
195, Pearl’s Hill Terrace, #03-31 Singapore 168976 | T: +65-65368220 | F: +65-65362303 | www.blackvel.com
PP WOVEN :
Description WovenPolypropylene
Yarn Count:TD (DIN 53864)MD (DIN 53864)
1500 Denier2000 Denier
Tensile Strength:TD (DIN 53857)MD (DIN 53857)
190 DAN/5cm200 DAN/5cm
Elogation at Break:TD (DIN 53857)ND (DIN 53857)
18%14%
Nominal Thickness 350 micron each ply
Tensile Strength:MD (ASTM D6381V at
50mm)TD (ASTM D6381V at
50mm)
>= 36Mpa>= 36Mpa
Tear Resistance:MD (ASTM D1004)TD (ASTM D1004)
>=90N>=90N
Puncture Resistance:(ASTM D4833) >=99N
ElongationMD (ASTM D6381 at
50mm)TD (ASTM D6381 at
50mm)
>=675%>=675%
INNER FILM:
3" Valve 2" Valve
Valve Type Butterfly , Camlock Ball, Camlock
Material PP (Food Grade) PP (Food Grade)
Color Gray Black
ExternalDiameter
85mm 62mm
Internal Diameter 62mm 40mm
Material ofHandle
Metal + Rubber PP
Advantage Faster FlowSlower Flow (Compared to 3"
Valve)
ApplicationsVariety
(Able to connect to areducer to change 3" to 2")
Limited
VALVE :
Woven is typicallyused in 1 tonBulkbag or FIBC, Asit can withstand hightemperature and itsabrasive to friction, itis chosen to be thebest material for theFlexitank’s protectivelayer.
isused predominantlyin Film Applicationdue to its toughness,Flexibility and relativetransparency.
Heater Pad or Reheating Device is used to reheat solidified products in the flexitank upon arrival atdestination. This Reusable Device is designed to allow maximum exposure of heat when placedunderneath the solidified Flexitank. In extreme case when on heater pad is not enough to liquefy theharden product, another Heater Pad is placed on top as a “blanket” for intense heating.
Heater Pad is packed in compact size to maximise ease of handling.
- Winter
- Transporting products that has high melting point
Layout Dimensions: 5.58 m (Width) X 2.1 m (Length)
Packed Dimensions: 2.25 m (Length) X 0.54 m (Width) X 0.19 m (Height)
Approximate Weight: 55kg
Description: Heater Pad
Material: Caoutchouc + Steel
Inside Diameter: 8 mm
Outside Diameter: 16 mm
Outlet Hose: Reinforced Rubber 25 mm
Inlet Hose: 25 mm
Working Pressure: < 0.5 Mpa
Temperature Range: < 150°C
Heat Source: Steam
195, Pearl’s Hill Terrace, #03-31 Singapore 168976 | T: +65-65368220 | F: +65-65362303 | www.blackvel.com
HEATER PAD
As below are a list of countries that BlackVel isto conduct Emergency Rework
1. Asia - Singapore - Malaysia - Thailand - Philippines - Sri Lanka - China - Korea2. Europe - Russia - England - Turkey
3. South America - Brazil - Argentina
BlackVel has beenactively assisting our overseascounterparts in numerous emergencyrework. We are well versed in handlingdifferent scenario and has successfullyexecuted severe cases at ease.
Our Emergency Rework includes :
- Cross Pumping from leakingFlexitank to new Flexitank
- Cross Pumping from leaking Flexitankto other packaging such as IBC Tank
- Surveying the extend of leakagesfrom the leaking flexitank
- Cross Pumping on the Vessel in thesea
Apart from being an active team inSingapore PSA, we are also wellsituated in different parts of theworld to provide
a completeservice and support for our valuable
customers. As BlackVel carries otherpackaging, we are flexible in repackingthe salvaged products into otherpackaging as required by ourcustomers. This flexibility enables us towin the trust of our local and overseasclients.
195, Pearl’s Hill Terrace, #03-31 Singapore 168976 | T: +65-65368220 | F: +65-65362303 | www.blackvel.com
EMERGENCY REWORK
APPLICATIONS
195, Pearl’s Hill Terrace, #03-31 Singapore 168976 | T: +65-65368220 | F: +65-65362303 | www.blackvel.com
Adhesive Base Oil Biodiesel (Methyl Ester) Castor Oil Detergents Emulsions
Glycerine(Crude/Refined) Fatty Acids Transformer Oil Lube Oil Mineral Oil Natural Latex
Surfactants Synthetic Latex Tall Oil Fatty Acid Furnace Oil Polyol White Oil
If your product is not listed here, please email to us a copy of your product MSDS (Material Safety DataSheet). We will run a check on whether your product is compatible with the Flexitank.
Animal Oils Coconut Oil Corn Oil Dark Soy Sauce Flat Beer Fish Oil/Sauce
Fruit Juice Malt Glucose Jam Oilve Oil Palm Oil
Peanut Oil Soya Bean Oil Syrup Vegetable Oil Water Wine
Our Flexitanks are suitable for the carriage of most types of non-hazardous
BlackVel provides the relevant services for our customers:
BlackVel will request customers to send a copy of the product MSDS before proceeding to procure theFlexitank. This is to ensure that all products loaded are compatible to the Flexitank and eliminate anyforeseen accident.
A list of container selection guide will be given to customers to ensure that the correct containers arearranged
BlackVel will engage her own Team to carry out the Fitting Service as this will ensure that correct procedurehas been carried out.
Our Technical support personnel are capable in all aspects of technical know-how of flexitank operations.
We are able to carry disposal service in different countries but it will be subjected to the respective countriesrules and regulations. An additional disposal charge could incurred in certain countries.
OUR SUPPORT
195, Pearl’s Hill Terrace#03-31Singapore 168976
(65) [email protected]
195, Pearl’s Hill Terrace, #03-31 Singapore 168976 | T: +65-65368220 | F: +65-65362303 | www.blackvel.com