Introduction - 4.imimg.com4.imimg.com/data4/LB/GC/MY-11194479/cl_-gayatree... · Gandhi, presently...
Transcript of Introduction - 4.imimg.com4.imimg.com/data4/LB/GC/MY-11194479/cl_-gayatree... · Gandhi, presently...
Introduction: Gayatree Polymers Pvt. Ltd. (GPPL) was formed in 1985 by N. C.
Gandhi, presently serving as C.E.O. of the company.
GPPL a precision Rubber Molded Parts and specialty Unsaturated
Polyester Resin manufacturer based in Pune, India.
Through the two product lines GPPL caters the automotive, electrical,
infrastructure, telecommunication, consumers products and medical
sectors.
1983 In eption of GPPL’s Ru er Molded Parts
manufacturing
1985 Shifted manufacturing into new unit at
Santosh Nagar (shop floor area 10,000sq ft.)
1995 GPPL ventured into manufacturing
Unsaturated Polyester Resin
2005 Company erected 2nd plant in Nahre Industrial
Zone. (Total shop floor area 35,000 sq. ft.)
2014 GPPL integrated all activities at the Narhe
Plant.
Overview: Located on Mumbai – Pune by-pass
Total shop floor area: 35,000 sq. ft.
Strength: 105 employees
Rubber mixing, rubber molding, testing under one roof
ISO / TS 16949:2009 certified co.
Compounding:
Compounding using various type of polymers.
Nitrile (NBR)
H-NBR
PVC-NBR
Natural (NR)
Silicone (VMQ)
Viton (FKM)
Polyacrylic (ACM)
EPDM (EP)
SBR
Neoprene (CR)
Fluorosilicate (FVMQ)
Vamac
Mixing Dept.
Auto-Weighing System:
Mixing Dept.
Dispersion Kneader
Mixing Dept.
Mixing Mill:
Mixing Dept.
Pre-forming Machine:
Molding: State of art molding facility
Range from 50 - 200 Tons
Total no. of stations twenty
2500 sq. ft., laboratory set up
Latest instruments to check raw material, in-process and finished
products
Testing as per JIS, ASTM, DIN, IS standards
Laboratory & R&D:
• Karl Fischer apparatus
• Flash point
• Refractive Index tester
• Muffle Furnace
• Oscillating Disc Rheometer
• CarbonDispersionAppartus
• Specific Gravity s
• KMI Tensile tester
• Hot Air Oven
• Ozone Chamber
• Video Measuring System
• Universal Testing Machine
Testing Instruments:
Laboratory:
Laboratory
Laboratory:
Tool Room: Well equipped Tool Room
I. Mold designing (CAD-CAM)
II. Prototype and multi-cavity molds
Tool Room Well equipped Tool Room
I. Mold designing (CAD-CAM)
II. Prototype and multi-cavity molds
Inspection: 100% visual inspection as per Final inspection plan
Dimensional inspection, as per sample inspection plan
Automatic optical inspection machine for O Rings
Finish Goods Storage: ERP Software to control & monitor the production, inventory
& traceability from raw material inward to dispatch.
O’Rings
Gaskets
Grommets
Diaphragms
Bearings & Bushes
Seals
Level Indicators
Bellows & Dust Covers
Clientele:
Achievements: EXPORTS TO JAPAN, BRAZIL & IRELAND
VENDOR RATING MORE THAN 98% FOR ALL CUSTOMERS
MORE THAN 80% PARTS ARE USED DOL
ABIDE BY ENVIORNMENTAL NORMS SUCH AS ROHS AND REACH COMPLIANCE
AWARDED FOR BEST QUALIY PERFORMANCE AND JUST-IN
TIME (JIT) DELIVERY FROM VARIOUS CUSTOMERS
COMPOUNDS APPROVED BY INTERNATIONALLY RECOGNIZED LABORATORIES
CERTIFIED ISO / TS 16949:2009 (TUV NORD)
Office: Procurement, Logistics, Accounts & Marketing
Tally ERP 9 software for accounts & finance
THANK Y0u!