INTRODUCING THE COMBINING TODAY’S MECA500 BEST …...Chandler, AZ 85226 480-893-8086. COLORADO...
Transcript of INTRODUCING THE COMBINING TODAY’S MECA500 BEST …...Chandler, AZ 85226 480-893-8086. COLORADO...
877.478.3241 | www.iptech1.com
INTRODUCING THE MECA500COMBINING TODAY’S
BEST TECHNOLOGIES for Tomorrow’s Breakthrough Discoveries
CALIFORNIA25350 Magic Mountain ParkwaySuite 332Valencia, CA 91355661-383-2693
ARIZONA7403 West Boston StreetBldg D-1Chandler, AZ 85226480-893-8086
COLORADO6531 West 56th AvenueSuite 15Arvada, CO 80002303-231-9955
NEW MEXICO1108 Alvarado NEAlbuquerque, NM 87110505-232-6612
UTAH189 South State Street, 100 Clearfield, UT 84015801-355-9899
GENERAL CONTACT INFORMATIONEverywhere: 877-478-3241 [877-IP-TECH1]General Email: [email protected]
Motion Control Solutions Robot Solutions
VALUE ADDED CENTERWhen it comes to motion control, machine vision, and robotics sub-assemblies there is no substitute for experience. With over 20 years of designing and delivering custom systems, In-Position Technologies’ Value Added Center is the perfect solution for outsourcing your sub-assemblies and other non core products that are causing bottlenecks and quality issues in your production facility. IPT will not only save you time and money, but our Value Added Center will allow your team to focus on your core competencies. Simply stated, we make you more productive.
• Custom engineering
• Mechanical sub-assemblies
• Robot installation and programming
• Machine vision systems
• Multi-axes motion control
• Kitting and custom part numbers
• Electrical enclosures
• Custom cable assemblies
• Structural aluminum framing
• Gantry systems
• Programming and software development
• Control panel design, build, document, and test
• Field support, installation, and training
• Tables and stages
• 3D solid modeling software
• Machine start up and test
Value Added Services Provided by IPT
Why use IPT Value Added Services?• Lower overall cost
• ISO 9001:2008 Certified
• Experience and expertise
• Reduce your time to market
• Allows personnel to focus on their areas of expertise
• Lowers your risk
• Reduces staffing and facility requirements
• Increased quality and documentation
Benefits of using IPT Value Added Services• Improve machine performance
• Reduce cost and scrap
• Improve yield
• Improve safety
• Reduce power consumption
QUALITY POLICYIn-Position Technologies’ Mission is
to provide cost-effective, and quality
products and services to meet the
ever-changing needs of the automation
industry. To do this we conduct our
business with integrity, and maintain an
audited Quality Management System that
enables us to continually improve the
quality of our products and services.
QUALITY OBJECTIVES1. Provide products and services that meet or surpass our customer’s requirements.
2. Provide on-time delivery of our products and services.
3. Maintain accurate record keeping and document control.
4. Reduce customer complaints.
ISO 9001:2008 QMS
877.478.3241 | www.iptech1.com
INTRODUCING THE MECA500
Repeatability 0.005 mmReach (at wrist center) 260 mmTotal weight 4.5 kgRange of joint 1 −175° to +175°Range of joint 2 −70° to +90°Range of joint 3 −135° to +70°Range of joint 4 −170° to +170°Range of joint 5 −115° to +115°Range of joint 6 ±100 revolutions
EtherCAT Control
Speed of joints 1–6 {150, 150, 180, 300, 300, 500} °/sBrakes on joints 1, 2 and 3Robot mounting any orientationSupply voltage 24 V DCPower consumption 50 W (for a typical program)Communication Ethernet TCP Socket, EtherCATController embedded in robot baseProtection rating IP 40
5 Micron RepeatabilitySpecifications