Your Design | Perfected

INTRODUCING

PIGMENTO ZINC

THE NATURAL TEXTURES OF ZINC COMBINED WITH ORGANIC COLORS

OZZ Orange

NZZ Brown

GZZ Grey

RZZ Red

BZZ Blue

S U R FA C E T R E AT M E N TWith PIGMENTO®, the sur face of QUARTZ-ZINC® coi l is glazed with mineral color pigments to produce r ich ear thy hues. The vis ible and natural texture of the QUARTZ-ZINC® wil l remain, but the resul t is a dis t inct ive shine that of fers the deep texture of a natural metal wi th the wide palet te of man-made colors.

F I N I S H T O L E R A N C EFin ish color of natura l meta l cannot be cont ro l led and some var ia t ion should be expected.

P R O D U C T T O L E R A N C EWidth: ± 0.08” (2mm)

Length: ± 0.16” (4mm)

Thickness: 3mm ± 0.008” (0.2mm)

4mm ± 0.008” (0.2mm)

6mm ± 0.012” (0.3mm)

Bow: Maximum 0.5% of length and/or width

Squareness: Maximum 0.2” (5mm)

Peel Strength: >22.5 in lb/in (ASTM D1781)

ALPOL IC® mate r ia l i s t r immed and squared wi th cu t

edges to of fer the bes t sheet edge condi t ions in the

indus t r y.

P R O D U C T D ATA• Standard Sheet Size : 38” x 146”• Stock: Cus tom order a t th is t ime• Thickness: 4mm s tandard, 3 or 6mm avai lable• Core: ALPOLIC/fr s tandard, ALPOLIC PE avai lable

WA R R A N T Y

Standard sheet : 10 Year

F in ish: Not appl icable

Cal l ALPOLIC® Cus tomer Ser v ice for exc lus ions and

warranty detai l s .

F I R E P E R F O R M A N C EALPOL IC® shee t s can be p roduced wi t h a f i r e res is tan t ( f r ) minera l f i l led core or a polyethy lene (PE) core. Each has been tes ted by independent tes t ing labora to r ies us ing na t iona l ly recognized s tandards.

ALPOLIC®/fr mater ia l meets a l l requi rements of the In ternat ional Bui ld ing Code ( IBC) for non-combus t ib le cons t ruc t ion and the ICC-ES ESR 2653.

ALPOLIC®/PE meets a l l requi rements for bui ld ing appl icat ions under 40 feet f rom grade and the ICC-ES ESR 3704.

P R O D U C T N O T E S

– Zinc composi te mater ia ls should only be used in a rainscreen sys tem.

– Sheets should be s tored f la t in a dr y, indoor envi ronment.

– Fabr icate sheets a t temperatures above 55°F.

– Refer to ALPOLIC® fabr icat ion manuals for rou t ing and fabr icat ion recommendat ions.

– Pro tec t ive f i lm should be removed soon af ter ins ta l la t ion.

– Zinc needs to be iso la ted f rom aluminum and other diss imi lar meta ls to avoid galvanic cor ros ion.

– ALPOLIC® and VMZINC® recommend the use the same metal on both s ides of composi te mater ia l in order to avoid sheet dis tor t ion caused by the di f fer ing ra tes of thermal expansion of diss imi lar meta ls .

METAL COMPOSITE MATERIALSSOLID

PIGMENTO ® SERIES

Natural Metal Skin

PE or fr Core

Natural Metal Skin

Zinc Skin

Zinc Skin

PIGMENTO® Finish

401 Volvo Parkway, Chesapeake, VA 23320Telephone 1.800.422.7270 | Fax 757.436.1896

www.alpolic-americas.com | Email: info@alpolic.com

ALPOLIC® TECHNICAL ASSISTANCE1.800.422.7270 | technicalservices@alpolic.com

LITAP3009/REV 1011319