Introducing Belliss USA Inc.
description
Transcript of Introducing Belliss USA Inc.
1
Introducing Belliss USA Inc.
A SUBSIDIARY OF
A LEADING INTERNATIONAL
STEAM TURBINE MANUFACTURER
BELLISS INDIA LIMITED
2
Belliss USA Inc.
InternationalSourcing
Eng/DftgServices
ComponentManufacturing
Project Management
InstallationField
Services
SteamTurbines
Belliss USA Inc. 3
Belliss India Limited
Incorporated in 1960 - OVER 48 YEARS Originally turbines built under license from
W.H. ALLEN (UK) Previously a division of Rolls Royce Product range -100KW TO 20,000KW 0ver 2,500 turbines shipped to date 55,000 square feet of manufacturing and
test space Turbines consistent with API/ISO standards Units installed in 11 different industries Units operating in 15 different countries
Belliss USA Inc. 4
Bhadreshar Works
Belliss USA Inc. 5
Worldwide Installations
AUSTRALIA BANGLADESH FIJI ISLAND NEPAL NEW ZEALAND NIGERIA SINGAPORE
SPAIN SOUTH AFRICA TANZANIA UGANDA VIETNAM PHILIPINES UGANDA
We have not only made our mark in India but in other countries such as…
The first Indian company to export to South Africa and Australia
Belliss USA Inc. 6
Technical Strength Technology company with 250 engineers designing,
manufacturing and servicing steam turbines Partnering with USA design engineering company
with extensive steam turbine design and packaging experience
Products consistent with international standards including, NEMA, ISO and API
Design and performance tools used for the design of thousands of turbines by Belliss and W.H. Allen
Development tools including 3-D design and modeling software
Belliss USA Inc. 7
Infrastructure Three (3) Manufacturing, assembly and test facilities
Bucket and rotor shop with multi-axis NC machining
In house fabrication and machining of diaphragms
Fully computerized engineering and design facility
Proven analysis software and design tools
Project execution team
Over 50 Field service engineers on staff
Steam testing facility
In house parts warehouse
Complete lubrication system design and testing
Digital and mechanical controls expertise including system integration and testing
Belliss USA Inc. 8
Bio Mass – Turbine Generator Sets for Uruguay
Two fundamental choices for steam turbine exhaust:
Non Condensing-Exhaust above atmospheric pressure Pros: Steam at lower pressures can be used in food processing,
heating, air conditioning, process or for other small turbine drivers.
Cons: Since exhaust pressure is high, depending on the pressure level, it will require 2 to 3 times as much steam to make the same output.
Potentially 100% Make up water will have to be treated.
Condensing Turbine –Vacuum or sub-atmospheric Pros: Due to the higher available energy, more power will be
generated for the available steam. Cons: Requires a condenser, cooling towers and a larger turbine Only choice if no steam host available
Belliss USA Inc.
NON CONDENSING (SNC) STRAIGHT CONDENSING (SC)
Bio Mass – Turbine Generator Sets for Uruguay
1.5-5 Kg/cm²g
Turbine
Condenser
Generator Gear
45 Kg/cm²g/@450 ºC
Belliss USA Inc. 10
Bio Mass – Turbine Generator Sets for Uruguay
Belliss India Limited has experience in both Condensing and Non Condensing turbines in this size range.
Geared turbine generator sets are the norm for this size range to take advantage of higher speed turbine designs
If High power sales is key, a condensing turbine is best
If Process steam is more valuable, a non condensing turbine may be best
Belliss USA Inc. 11
Turbine Generator Inlet Steam Inlet Flow Exhaust
Speed Kwe Conditions kg/hr Conditions
Normal 450 ___ Kg/cm² g/ ____°C ___Kg/cm² ABS
Rated 495 ___ Kg/cm² g/ ____°C ___Kg/cm² ABS
Bio Mass – Turbine Generator Sets for Uruguay
Required steam data:(If steam flow is known, output will be calculated)
Note: Every turbine/generator set is custom designed
Inlet steam conditions:(The higher pressure & temperature, the greater the available energy
will be but, the cost of hardware will likely increase as will the plant piping)
Belliss USA Inc. 12
Single Stage TurbineMODEL SS4AMODEL SS4A
Max Output • 700 HPRated Speed • 7,000 RPM Max Inlet Pressure • 640 PsigMax Inlet Temp • 842 °FttMax Exhaust • 80 PsigNumber of Hand Valves: 2Standards Followed BS/NEMA/APIApplication: Mechanical Drives & Power Gen
Belliss USA Inc. 13
MODEL SS6AMODEL SS6A
Single Stage Turbine
Max Output • 1,200 HPRated Speed • 6,000 RPM Max Inlet Pressure • 640 PsigMax Inlet Temp • 842 °FttMax Exhaust Pressure • 80 PsigS6H : 1,200 HP @ 256 Psig ExhaustNumber of Hand Valves: 2Standards Followed: BS/NEMA/APIApplication: Mech. Drives & Power Gen
Typical Scope Turbine Gear Generator Oil System Turbine Controls Generator Excitation and Protection Base mounted turbine, gear and generator Steam testing Condenser when required
Belliss USA Inc. 14
After Market Support
Large spare parts inventory at Kolkata factory
Fifty (50) Experienced service engineers trained and ready
for deployment world wide
Association with USA Engineering and service companies
Belliss USA Inc. 15
Summary Belliss Turbines
Incorporated in 1960 Heritage from W. H ALLEN/ ROLLS ROYCE Over 1200 single stage turbines in service Over 1300 multi stage turbines in service Highly standardized frame sizing designs Complete packaging including controls and oil
system Detail design and analysis on every unit ISO 9001:2000 Certified Material certification and inspection by LLOYDS