INTERNATIONALLY ACCREDITED INSTITUTE OF ENGINEERING AND TECHNOLOGY ULAANBAATAR, MONGOLIA.
-
Upload
moses-whitehead -
Category
Documents
-
view
216 -
download
0
Transcript of INTERNATIONALLY ACCREDITED INSTITUTE OF ENGINEERING AND TECHNOLOGY ULAANBAATAR, MONGOLIA.
INTERNATIONALLY ACCREDITED
INSTITUTE OF ENGINEERING AND TECHNOLOGY
ULAANBAATAR, MONGOLIA
1984 5th Secondary School of Construction technicians 1995 Mongolian Turkish joint construction technical college2000 Restructured and became TECHNICAL AND
TECHNOLOGICAL COLLEGE, trains skilled workers through vocational and higher education in the areas of construction, road construction and food industry
2007 Accredited for our educational accomplishment by the National Educational Accreditation Commission
2012 Successfully certified by the Ministry of Education and Science in May
2012 Updated to the INSTITUTE OF ENGINEERING AND TECHNOLOGY in July
September 2012 we were accredited by APACC with a ”Silver Award” valid for next three years.
For the current academic year we have a total of 2628 students. Vocational education and training 73,3% Technical education 270 students 10,2% Vocational education 1532 students 58,3% Vocational training 124 students 4,7%
Higher education 26,7% Higher education 702 students 26,7%
160 teachers and admin personnel
118 teachers Over 75% of teachers have a Professional, Master or Doctor’s degree
From October 2011 we have run 3 courses for 7 different subject involving a total of 290 students.
This year we 90 students participating in the following courses:
• Welding -15
• Plumbing -16
• Road construction -17
• Heavy machinery operator-22
• Interior decoration -20
1. Interior decoration & painting2. Bricklaying 3. Reinforced concrete working4. Plumbing5. Welding 6. Carpentry 7. Electrical installation 8. Road construction, bridge work9. Auto mechanic10. Chef
1. Construction technician
2. Plumbing technician
3. Auto technician
4. Road technician
5. Electrical technician
1. Civil engineering
2. Road construction engineering
3. Plumbing- mechanical services
4. Architecture
5. Food preparation and services
technologist
OVER 50 CONSTRUCTION COMPANIES SUCH AS
ZAG Co., Ltd, Т&G Co., Ltd, NIISEL ORGOO Co., Ltd, EREL CONSTRUCTION, MONTER, MONHOURUS, 017TH MILITARY DIVISION OF CONSTRUCTION, INKON Co., RISING SUN CONSTRUCTION PROJECT, SAN Co., Ltd, HURD Co., Ltd etc
OVER 30 ROAD CONSTRUCTIN COMPANIES AUTHORITY OF ROAD CONSTRUCTION, YALGUUSAN, NARANBULAG
KHAN, ALTAIN ZAM, TUV AZZA STATE OWNED Co. Ltd, CTC, ERDENESUVARGA, HIGHSPEEDROAD, ESTO, ORKHONAZZA, PERFECT ROAD, MONROAD, NASNYZAM, GANGUUR etc
OVER 40 AUTO TRANSPORT COMPANIES ZIG ZAG Co., Ltd, MASTER PLAZA,‘FIVE’COMPANY of auto transport,
HUANDAI MONGOLIA Co.,Ltd, MONNIS GROUP the official distributor of NISSAN MOTORS COMPANY, AUTO service company of traffic police etc
OVER 30 IN FOOD PROCESSING AND CATERING ULAANBAATAR Hotel, BAYANGOL Hotel, TERELJ 5 star hotel, BROADWAY
Chain restaurant of ENZOKO Co., Ltd, BRAU HOUSE of Khanbrau Co., Ltd, MONGOLIAN PALACE RESORT, STATE RESORT COMPLEX, GENERAL AUTHORITY of POLICE, RAMADA Restaurant, BERLINBURGER restaurant etc
In total we work with more than 200 companies and organizations.
EUROPEState Construction University of Moscow, RUSSIAKomzet Vocational Training Center, Kottbus, GERMANY
ASIATomakomai national college of technology, Sapporo city , JAPANDONG-EUI Institute of Technology, BUSAN city, KOREAEngineering and Pedagogical College of Ulan-Ude, RUSSIA
АUSTRALIAHolmesglen, Melbourne, AUSTRALIA
USA
MCC, MCA-MONGOLIA
ЕUROPE
ЕUROPEAN UNION – European Reconstruction and Development Bank
GERMANY –GIZ /German Cooperation Agency/
GERMANY –SES /Senior Experten Service/
АSIA
PHILIPPINES -CPSC / Colombo Plan Staff College/
АUSTRALIA
AUSTRALIA -AusAID, Austraining International
Workshop of Electronics
Workshop of Carpentry
Workshop of Plastering and Decorating
Workshop of Concrete work Workshop of Concrete work
Heavy machinery simulator room
Library
Workshop of Food processing
Mock restaurant
PROJECT FOR ESTABLISHING CENTER OF EXCELLENT IN CONSTRUCTION
TRADE
PROJECT IMPLMENTATION TERM: 2010-2013
PROJECT AIM : Support developing leading Center of Excellence in the sector that could be an ideal example for other vocational training institutions
COMPONENT 1. POLICY OPERATION FRAMEWORK REVIEW
1.EMPLOYER AND TRAINING INSTITUTION COOPERATION
2.MANAGEMENT CAPACITY BUILDING PARTNERS
3.TWINNING
COMPONENT 2. CURRICULUM DEVELOPMENT
1.CURRICULUM DEVELOPMENT
2.INTENSIVE TECHNICAL ENGLISH LANGUAGE TRAINING
COMPONENT 3. COMPETENCY BASED TRAINING
1.MASTER TEACHERS
2.TEACHER INSTRUCTORS
3.INSTRUCTIONAL MEDIA EQUIPMENT & MATERIAL
COMPONENT 4. LABOR MARKET INFORMATION SYSTEM AND CAREER GUIDANCE SERVICE
1.CAREER GUIDANCE SERVICE TRAINING
COMPONENT 5. IMPROVEMENT OF LEARNING ENVIRONMENT
1.CIVIL WORK -REHABILITATION
2.EQUIPMENT -EQUIPMENT PROVISION
NUMBER OF ACTIVITIES TOTAL 11