International University 3D Conductive Challenge
2
Kindly Sponsored by The first 8 Universities to apply. 4 from the USA & 4 from the UK will be eligible. The winner will be announced on 27th November 2015. Simple rules and conditions overleaf 3D FilaPrint webstore Think Design Print OF THE YEAR! Competition INTERNATIONAL UNIVERSITY 3D CONDUCTIVE CHALLENGE Plus filament types selected from the amazing Using the latest innovative conductive/ dissipative filaments Graphene 3D Labs Unique 3D printed prizes from Airbus brought to you by
description
Is your University ready for a challenge? Do you have the creativity to design and 3D desktop print something that has never been seen before? We are throwing down the gauntlet - will you accept the challenge? Sponsored by Airbus UK, GlobalFSD.com & 3D FilaPrint.
Transcript of International University 3D Conductive Challenge
Kindly Sponsored by
The first 8 Universities to apply. 4 from the USA & 4 from the UK will be eligible.
The winner will be announced on27th November 2015.
Simple rules and conditions overleaf
3D FilaPrint webstore
Think Design Print
O F T H E Y E A R !Competition
INTERNATIONAL UNIVERSITY 3D CONDUCTIVE CHALLENGE
Plus filament types selected from the amazing
Using the latest innovative conductive/ dissipative filaments
Graphene 3D Labs
Unique 3D printed prizes
from Airbus
brought to you by
Kindly supported by
Your 3D design should be
created for printing on a FFF/FDM 3D printer only.
The winning design will be chosen for its, innovation, imagination and
practical use of 3D Desktop printing.
The winner will be announced on 27th November 2015.
Successful entrants will be made available on the 3Dprint.com University Conductive challenge page.
http://3dprintboard.com/forumdisplay.php?129-International-University-3D-conductive-challengeYou may also publicise the challenge on your own forums & social media. The
3dprint.com conductive challenge page is also available to use as a platform to publicise your competition entry, teasers for the other successful entrants!
UNIVERSITIES FROM WITHIN THE UK AND USA
First 8 entries will be accepted, 4 from each country.4x4
Entrants agree to have their names, title and University details used for marketing and promotion of the 3D Conductive Challenge.
If selected you will have until 7th October 2015 to choose your additional filament types along with submitting your design, (your design will not be disclosed to the other entrants). You can choose up to 180 metres of 1.75mm or 80 metres of 2.85 or 3mm (1 metre = approximately 5gms, 750gms in total) You can make up these lengths from any of the filaments that are available on 3D FilaPrint.com, using any combination. Each successful entrant will also be given 400gms of conductive/dissipative filaments from the 4 supporting manufacturers overleaf = 100 grams of each filament type.
Closing date for entry is Monday 14th Sept 2015. Successful entrants will be notified by email.
Your final 3D printed object, photos and supporting documentation must be submitted no later than 20th November 2105.
Submit your application to [email protected]
Graphene 3D Labs
Unique 3D printed prizes
from Airbus
