International Engineering Research...
Transcript of International Engineering Research...
International Engineering Research Conference
3rd to 4th July 2019
9.00am – 5.00pm
Taylor’s University, Lakeside Campus
WELCOMING NOTE BY CHAIRPERSON OF THE 12th EURECA 2019
On behalf of the organizing committee, I am delighted to welcome
all the delegates, speakers and sponsors to Taylor’s University for the
12th International Engineering research conference (eureca) held on
3 – 4 July 2019. Eureca allows for the combination of research
initiatives with the presently entrenched culture of project-based
learning, as exemplified through the implementation of CDIO
initiatives at Taylor’s School of Engineering. We believe that the
superior combination will further propel our students towards
enhanced challenge-solving skills to contribute massively to the
development of the nation and mankind.
Our technical program is rich and comprises of 3 keynote speeches, one from academia
and two from industries such as Top Glove and BASF. We have 103 technical papers in
total split into 16 parallel session. Besides, there will be a session for final year students
poster presentations.
As the conference chair of 12th eureca, I know that the success of the conference
depends ultimately on the many people who have worked with us in planning and
organizing the event with us. In particular, we thank the Program Chairs for their wise
advice and brilliant suggestion on organizing the technical program; the external
reviewers for their thorough and timely reviewing of the papers, all the external judges
who accepted our invitation and our sponsors for providing their kind contributions to
the event.
We hope this conference will offer participants a platform to exchange ideas, discover
novel opportunities, reacquaint with colleagues, meet new friends and broaden
knowledge. Lastly, I would like to extend my sincerest gratitude to my organizing team in
making eureca to be yet another success story of Taylor’s School of Engineering!
Associate Professor Dr. Rashmi Gangasa Walvekar
Chairperson of the 12th Eureca 2019 conference,
School of Engineering,
Faculty of Innovation and Technology,
Taylor’s University Lakeside Campus.
KEYNOTE SPEAKER
Associate Professor Dr. Ghafour Amouzad
Mahdiraji
Associate Professor, School of Engineering, Taylor’s
University
Tailored Defecto-Glass as Radiation Dosimeter
Sensor – From Fabrication to Application
SYPNOSIS Ionizing radiation is radiation with enough energy so that
during interaction with an atom, it can remove tightly
bonded electrons from their orbits, causing the atom to
become charged or ionized. Radiation dosimetry is a measurement and calculation of
the radiation dose received by a matter or tissue resulting from the exposure to ionizing
radiation. Ionizing radiation dosimetry has wide range of applications such as personal
dose monitoring, radiation diagnosis, cancer/tumor therapy, food/spice and surgical
tools sterilization, nuclear association industries and etc. This talk demonstrates how by
tailoring glass-based optical fibers, radiation dose detection sensitivity of a material can
be improved more than 400 times. Also, the influence of fiber structures, dimensions, and
doping materials on performance of dosimeters will be discussed. Finally, several
practical applications such as in-vivo dosimetry that the developed dosimeters have
been used will be presented.
PROFILE Since May 2016, Dr. Ghafour joined the School of Engineering, Taylor’s University. Apart from
Optical Communication Systems, his current research interests are on photonic sensors based on
microstructured optical fibers. So far, he published more than 70 refereed journals, 35 conferences,
9 patents, and achieved several research and teaching excellence awards. In teaching, he has
experienced different Electrical and Communication courses and supervised several
undergraduate and postgraduate students. He involved in several research grant projects (total
of >RM 10 Million) as investigator/member. The significance of finding output form his research
projects are different types of optical fiber dosimeter sensors.
KEYNOTE SPEAKER
Ms. Agnes Lau Shok Chien
Head of Product Safety Asia Pacific, BASF.
Come create chemistry! People and talent
development in BASF
SYPNOSIS At BASF, we create chemistry for a sustainable future. We
combine economic success with environmental protection
and social responsibility. Chemical innovations play a key
role as they make a crucial contribution, above and
beyond existing solutions and to virtually all industry sectors.
At BASF, we believe that people are the key to our long-
term success and that talent is in everyone. Come and find
out with Agnes Lau, Head of Product Safety Asia Pacific about how 'you' can create
chemistry with us!
PROFILE Agnes Lau is Head of Product Safety Asia Pacific. She joined BASF in 2012 and is responsible for
creating, building and moulding the Chemical Regulations team into what is it today. Based in
Kuala Lumpur, Agnes frequently visits BASF sites across Asia Pacific markets and has gained insights
on the region’s developing and evolving chemical and trade control regulation landscape over
the years. In her current role, Agnes leads a diverse expertise team across different countries in
Asia Pacific. Agnes is passionate in people development and enabling talent in living their fullest
potential
KEYNOTE SPEAKER
Ms. Mei Ng
HR Senior Manager of Top Glove, Chairman of Top
Glove Foundation
Employers’ Expectations and
Employability Skills of Fresh Graduates
SYPNOSIS Employability skills refer to set of skills and knowledge
required by the graduates in the workplace to satisfy
their needs and corporate expectations. In this talk, we will discuss the expectation from
the recruiters and how the students can develop their employability skills and how it
should be applied in the interview session.
PROFILE Ms. Mei Ng is the Senior Manager, HR of Top Glove. She has more than 20 years of talent acquisition
experience and recruits more than 2300 graduates yearly and globally for the company. A
graduate from RMIT, Australia and a council member of the Malaysian Rubber Export Promotion
Council (MREPC), Ms. Ng is also the Chairman for Top Glove Foundation.
Engineering Education Workshop: Conceiving - Designing - Implementing -
Operating (CDIO) Framework
SYNOPSIS:
Ever since developed by MIT in year 2000, the CDIO Framework has emerged as the
core of Engineering Education globally and being adapted if not adopted by
engineering schools internationally. A statement of the underlying need for
engineering education is that: Graduating engineers should be able to conceive-
design-implement-operate complex value-added engineering systems in a modern
team-based environment [CDIO Syllabus Version 2.0, 2011]. CDIO-ability has been seen
as the ultimate aim for engineering graduate whereas to attain this skill, an engineering
graduate will have to master 1. Technical Knowledge and Reasoning 2. Personal and
Professional Skills and 3. Interpersonal Skills and these can be achieved through project-
based learning. This workshop will introduce CDIO framework, how it is implemented
though project-based learning and some innovative deliveries that may be useful to
all engineering educators.
Trainers biodata:
Dr Se Yong is a lecturer in the School of Engineering, Taylor’s University.
He was the Programme Director for Foundation in Engineering, which
allows him to adopt many teaching and learning initiatives in the
programme to improve student learning experience and knowledge
attainment. Dr Se Yong is actively participated in teaching and
learning exhibition, nationally and internationally. In year 2018, he has
won 3 medals from the competitions and also presented 2 papers in
international engineering education conferences. Dr Se Yong is a fond
user of CDIO and adopting it in his project-based modules.
Dr Rashmi Walvekar obtained her bachelor’s in Chemical
Engineering from SDM college of engineering and Technology,
Dharwad (India). She completed her PhD in the area of nanofluids for
heat transfer application. During her PhD she won several awards at
university, national and international level. She has published more
than 30 journal papers appearing in both ISI and Scopus indexed
journals. Her other research output includes 3 patents and 4 book
chapters. Dr Rashmi has been awarded with vice chancellor most
cited academic award and best paper presentation at Taylor’s
research fair in year 2016. Her research area includes nanofluid
synthesis for heat transfer application, deep eutectic solvents as
alternative solvents, recycle of waste rubber tire, production of
nanoparticles from biomass and bio-nanolubricants.
PROGRAMME ITINERARY
8.30am-9.00am
Delegate Registration
LT1, Block B,
Level 1
9.00am-9.10am
Welcome Address of 12th Eureca 2019
Associate Professor Dr. Rashmi Gangasa Walvekar
Chairperson, Organising Committee
for the 12th Eureca 2019
LT1, Block B,
Level 1
9.10am-9.20am Official launch and group photo LT1, Block B,
Level 1
9.20am-9.50am
Keynote Session 1
Associate Professor Dr. Ghafour Amouzad Mahdiraji
Taylor’s University
LT1, Block B,
Level 1
9.50am-10.00am
Break
10.00am-12.20pm Session A1
E6.02
Session A2
E6.03
Session A3
E6.04
Session A4
E6.05
Session A5
E6.16
Session A6
E6.17
Session A7
E6.18
Session A8
E6.19
Session A9
E7.02
Session A10
E7.03
Session A11
E7.14
Final Year Project 1 Poster Exhibition Block B,
Level 1
12.20pm-1.30pm Lunch Break
C6.01,
Block C,
Level 6
1.30pm-3.30pm Session B1
E6.02
Session B2
E6.03
Session B3
E6.04
Session B4
E6.05
Session B5
E6.16
Final Year Project 1 Poster Exhibition Block B,
Level 1
3.30pm-4.30pm Keynote Session
1. Top Glove – Ms. Mei Ng
2. BASF Asia Pacific – Ms. Agnes Lau Shok Chien
LT1, Block B,
Level 1
4.30pm-5.00pm Awards and Closing Ceremony LT1, Block B,
Level 1
July 3, 2019
(Wednesday)
PROGRAMME ITINERARY
9.30am-12.30pm
Engineering Education Workshop: Conceiving - Designing -
Implementing - Operating (CDIO) Framework
CDIO
Incubator,
Block D,
Level 1
12.30pm-2.00pm
Lunch
July 4, 2019
(Thursday)
Session A1
Venue: E6.02
Time: 10.00am – 12.20pm
10.00am-10.20am
2CE01
Effect of Turning Frequency on Composting of Empty Palm Fruit Bunches with
Partially Treated Palm Oil Mill Effluent
Alvin Thong Jia Cherng, Phoon Chow Lin
10.20am-10.40am
2CE02
Wastewater treatment using Hibiscus sabdariffa: Drying, extraction and
response surface methodology optimisation studies
Anis Izyani Binti Mohd Ruslee, Nurhazwani Ismail, Chua Bee Lin
10.40am-11.00am
2CE03
Vulnerability Analysis Towards Process Reliability
Bryan Heng Shoong Ern, Leong Yik Teeng, Wan Yoke Kin
11.00am-11.20am
2CE04
Investigation of Foulants in Sewage for the Application of PVDF Membrane
in Membrane Bioreactor
Chu Yu Huan, Oh Kai Siang
11.20am-11.40am
2CE05
Green Wall Filtration System for Lake Water Treatment
Chua Guan Xuan, Oh Kai Siang, Yoon Li Wan
11.40am-12.00pm
2CE06
Preparation and Characterization of Chitosan-Polyvinyl Alcohol Hybrid
Membrane
Emir Danial Iskandar Abdul Razak, Pang Ming Meng, Oh Kai Siang
12.00pm-12.20pm
2CE07
Synthesize an Optimum Combined Heat and Power (CHP) System for Sago
Industry via Mathematical Approach
Gan Sheng Hsien, Wan Yoke Kin, Leong Yik Teeng
Session A2
Venue: E6.03
Time: 10.00am – 12.20pm
10.00am-10.20am
2CE08
Effect of Plasticizer on Properties of Polylactic Acid filled Graphene
Goh Kah Sheng Derek, Pang Ming Meng, Koay Seong Chun
10.20am-10.40am
2CE09
Effect of Phosphorus-Limitation on Glucose and Bioethanol Production from
Microalgae
Isaac James, Yoon Li Wan, Chow Yin Hui
10.40am-11.00am
2CE10
Chitosan-PEG membrane for Greywater treatment: A study of the effect Non-
Woven Fabric support on the membrane properties
Jabe Abdelrahaman Roman Jermalili, Oh Kai Siang
11.00am-11.20am
2CE11
Synthesis of Crumpled Graphene by Fast Cooling Method
Jerald Mulder Semat Anak Marcus, Rashmi Walvekar
11.20am-11.40am
2CE12
Synthesize A Sustainable Wastewater Treatment Plant (WWTP) For Sago
Industry
Kelvin Teo Kai Wen, Wan Yoke Kin, Leong Yik Teeng
11.40am-12.00pm
2CE13
Direct Saccharification of Lignocellulosic Biomass by Using Deep Eutectic
Solvent for Reducing Sugar Production
Ker Wei Hang, Yoon Li Wan, Chow Yin Hui
12.00pm-12.20pm
2CE14
Studies of Hybrid Drying Optimisation of Ultrasound Assisted Osmotic
Dehydration (UOAD) and Hot-Air Drying on Eucalyptus Deglupta (Rainbow
Eucalyptus)
Khor Yit Cheng, Chua Bee Lin
Session A3
Venue: E6.04
Time: 10.00am – 12.20pm
10.00am-10.20am
2CE15
Extraction of Bioactive Compounds with Potential Antioxidant activity from
Carica papaya Leaves with Aqueous Micellar Two-Phase System
Lee Teck Yiet, Chow Yin Hui, Chua Bee Lin
10.20am-10.40am
2CE16
Development Of Handmade Papers Based On Tree Pruning Waste
Lee Zheng Xun, Low Jiun Hor Low, Yoon Li Wan
10.40am-11.00am
2CE17
Development of Eco-friendly Polymer Films based on Liberica Spent Coffee
Ground Extract and Poly(vinyl alcohol) for Active Packaging Application
Lim Shu Wen, Low Jiun Hor, Chow Yin Hui
11.00am-11.20am
2CE18
Preparation and characterisation of polylactic acid composites filled with
hybrid conductive filler
Mohamad Amirul Haziq Mohd Azhar, Pang Ming Meng, Koay Seong Chun,
Yose Fachmi Buys
11.20am-11.40am
2CE19
Synthesis and Characterization of Hybrid Graphene Oxide/Gold
Nanoparticle
Muhammad Aizat Bin Mohamed Zahari, Rashmi Gangasa Walvekar,
Mahesh Vb, Khalid Mc, Priyanka R. Jd
11.40am-12.00pm
2CE20
Experimental Measurement Of Viscosity Of Blood Mimic For 3D-Printed
Medical Simulator
Muhammad Faris Mohd Fauzi, Anis Suhaila Shuib1, Muhammad Izzat
Ahmad Sabri, Ahmad Sobri Muda
12.00pm-12.20pm
2CE21
Potential of Using Hibiscus Sabdariffa in Treating Greywater
Nadia Falihah Ahmad Yani, Nurhazwani Ismail
Session A4
Venue: E6.05
Time: 10.00am – 12.20pm
10.00am-10.20am
2CE22
Effect of Activated Organic Sludge on the Process and Quality of
Composting Palm Oil Empty Fruit Bunches
Nur Lyana Bt. Mohamad Azhar, Phoon Chow Lin
10.20am-10.40am
2CE23
Preparation and Characterization of Thermoplastic Starch and Garden
Waste Fibers as Green Composites
Ong Qi Sean, Phang Siew Wei, Yoon Li Wan
10.40am-11.00am
2CE24
Separation of Intracellular Ectoine Produced by Halomonas salina Cells
using Aqueous Biphasic System
Poh Chin Tee, Ng Hui Suan, Yoon Li Wan, Chow Yin Hui
11.00am-11.20am
2CE25
Protein Partitioning In Sugaring-Out Assisted Aqueous Biphasic System
Sahlini Alagan, Chow Yin Hui, Yoon Li Wan
11.20am-11.40am
2CE26
Bioactivity Analysis of Solution Casted Bio-composite Made Up of Polyvinyl
Alcohol and Natural Hydroxyapatite Derived from Fish Bones
Sandy Song Chia Shuen, Phang Siew Wei, Yap Wei Hsum
11.40am-12.00pm
2CE27
The Development of Blood Mimicking Fluid with Polymer Particles
Selena Ng Hwei Ying, Anis Suhaila Shuib, Eunice Phang Siew Wei,
Muhammad Izzat Ahmad Sabri
12.00pm-12.20pm
2CE28
Ultrasound-assisted Extraction of Phenolic Compounds from Salvia
officinalis L. using Deep Eutectic Solvents: Antioxidant Capacity
Sem Yong Hao, Chua Bee Lin, Yoon Li Wan
Session A5
Venue: E6.16
Time: 10.00am – 12.20pm
10.00am-10.20am
2ME01
Development and Design of a Non-Rigid Blimp Shape to Improve its
Aerodynamic Efficiency at Different Altitudes
Aaron Gayvin, Abdulkareem Sh. Mahdi Al-Obaidi, Phang Swee King,
Shahrooz Eftekhari
10.20am-10.40am
2ME02
Development of a Computational Fluid Dynamics (CFD) Flow Model for
Simulating the Bubble-induced Noise in Refrigerant Piping System
Ahmad Naziirul Bin Ahmad Nazar, Ng Khai Ching
10.40am-11.00am
2ME03
Potential of Sugarcane Ethanol as Fuel for Vehicles in Malaysia
Arisya Hannah Umaruddin, Mohd Faizal Fauzan
11.00am-11.20am
2ME04
Computational Study for the Improvement of Dual Inlet Hydrogen Battery
using Different Flow Field Ratio Dimension Designs
Ashwin A/L Sekaran1, Mohd. Hardie Hidayat bin Mohyi
11.20am-11.40am
2ME05
Design and Fabrication of Novel Sound Insulator Using PLA-Fibre
Benjamin Earl Sinidol, Mohammad Hosseini Fouladi, Satesh Narayana
Namavisayam
11.40am-12.00pm
2ME06
Design And Analysis Of Airborne Wind Energy System (AWES) For
Microgeneration In Malaysia
Brandon Chew Chu Shyan, Douglas Tong Kum Tien, Shahrooz Eftekhari
12.00pm-12.20pm
2ME14
Numerical Investigation of the Effect of Spoiler Shape and Setting Angle on
the Performance of Racing Car
Hesam Eftekhari, Abdulkareem Sh. Mahdi Al-Obaidi
Session A6
Venue: E6.17
Time: 10.00am – 12.20pm
10.00am-10.20am
2ME07
Reduction of Hygroscopicity of PLA Filament for 3D Printing by Introducing
Nano Silica as Filler
Chin Tze Seng, Se Yong A/L Eh Noum
10.20am-10.40am
2ME08
Development of a Novel Multilayer Sound Absorption Panel
Choh Calveen, Mohammad Hosseini Fouladi, Satesh Narayana
Namasivayam
10.40am-11.00am
2ME09
Recycling of Polylactic Acid (PLA) Wastes from 3D Printing Laboratory
Choo Wei Jean, Choo Hui Leng, Ong Thai Kiat
11.00am-11.20am
2ME10
The Impact Of Unilateral And Bilateral Landing In Vertical Jump Among
Basketball Athletes
Darien Wong Wen Han, Ku Pei Xuan
11.20am-11.40am
2ME11
Preparation and Characterisation of Conductive Polymer Composite Made
by Graphite Scrap
Dylan Tong Jia Yee, Koay Seong Chun, Pang Ming Meng, Ong Thai Kiat
11.40am-12.00pm
2ME12
Design and Analysis of a Small- Scaled Compressed Air Energy Storage
System (CAES)
Elisa Eustace Pereira, Douglas Tong Kum Tien
12.00pm-12.20pm
2ME13
Development of Hierarchical Topographies with Benchtop Methods and
Comparisons of Its Self-Cleaning Characteristics with Single-Layered Micro
Topographies
Goeh Kar Jian, Felicia Wong Yen Myan
Session A7
Venue: E6.18
Time: 10.00am – 12.20pm
10.00am-10.20am
2ME15
Densification Behavior and Mechanical Properties of ZTA
Kevin Chandra, Sivakumar Sivanesan, Se Yong Eh Noum
10.20am-10.40am
2ME16
Computational Study for the Improvements of Proton Exchange Membrane
Fuel Cell using Hybrid Flow Design
Kok Ewe Gin, Mohd. Hardie Hidayat bin Mohyi
10.40am-11.00am
2ME17
The Numerical Analysis to Understand the Characteristics of Flow Around a
Honeycomb Topography in Relation to Biofouling Control
Leow Zyncoln, Felicia Wong Yen Myan
11.00am-11.20am
2ME18
Properties of Zirconia Ceramics with Stainless Steel Additions
Lo Wei Liam, Kelvin Chew Wai Jin, Ramesh Singh
11.20am-11.40am
2ME19
Numerical Simulation and Modelling on Thermoelectric and Mechanical
Performance of Thermoelectric Device
Luqman Hakiem Bin Mohd Razib, Lim Joon Hoong
11.40am-12.00pm
2ME20
Study on the Effect of Different Oxidants Used for Dyes Removal from
Wastewater
Mogana Vishnu Uthrapathy, Norhabibah Mohamad
12.00pm-12.20pm
2ME21
Effect of Printing Temperature on The Mechanical Properties of Copper Metal
Polylactide Acid models
Mohd Fara Zureel Ikhqwan bin Mohd Arpan, Lim Joon Hoong
Session A8
Venue: E6.19
Time: 10.00am – 12.20pm
10.00am-10.20am
2ME22
Investigation on Rheological Behaviour of Chrysanthemum stem fiber filled
Polylactic Acid (PLA) biocomposites
Koay Seong Chun, Muhamad Syafiq Aiman Mohamed Kaberi, Chou
Pui May, Ong Thai Kiat
10.20am-10.40am
2ME23
Development of a Visualization Software for Visualizing Computational Fluid
Dynamics Results Based on Mesh-Free Method
Muhammad Amirul Hakim, Ng Khai Ching
10.40am-11.00am
2ME24
An Economical Approach To Detect Cervical Cancer Through PAP Smear Test
Muhammad Bilal Ahmed, Hosseini Fouladi, Chong Pei Pei, Satesh Narayana
Namasivayam
11.00am-11.20am
2ME25
Potential of Waste to Energy in Malaysia
Muhammad Syafiq Mohd Fadli, Mohd Faizal Fauzan
11.20am-11.40am
2ME26
Preparation of Nanocellulose Via Enzymatic Extraction
Naviin Munusamy, Chou Pui May, Koay Seong Chun
11.40am-12.00pm
2ME27
Simulation of Discomfort from Combined Noise and Vibration in Vehicle
Rony Khong, Mohd Farid Bin Aladdin
12.00pm-12.20pm
2ME28
Polymer-Based Adsorbents For Dyes Removal From Aqueous Solution Using
Polypyrrole-Polyethylenimine (Ppy-Pei) Composite
Said Abdallah Al-Ashkhari, Norhabibah Mohamad
Session A9
Venue: E7.02
Time: 10.00am – 12.20pm
10.00am-10.20am
2ME29
A Study of Passengers Vibration Transmission on in a Vehicle
Sarveshkumar a/l Ananda Kumaresh, Mohd Farid Bin Aladdin
10.20am-10.40am
2ME30
Structural Design Optimization of a Reinforced Side Impact Rear Door Beam
of a Vehicle
Shayan Naseri Nia, Noor Zafirah Binti Abu Bakar
10.40am-11.00am
2ME31
Structural Design Optimization of Reinforced Side Impact Front Door Beam of
a Vehicle
Soo Yoong Feng, Noor Zafirah Abu Bakar, Azmi Osman
11.00am-11.20am
2ME32
Production and Characterization of Nanocellulose Produced from Kapok
Husk via Acid Hydrolysis
Tang Mooi Lian, Chou Pui May, Koay Seong Chun
11.20am-11.40am
2ME33
Preparation and Characterization of Corn Husk Fiber Reinforced Epoxy
Composites
Tengku Maimunah Binti Tengku Iskandar, Koay Seong Chun, Chou Pui May,
Ong Thai Kiat, and Chan Ming Yeng
11.40am-12.00pm
2ME34
Assessment of Automobile Flywheel By Using Finite Element Analysis
Tham Zi Bin, Ku Pei Xuan
12.00pm-12.20pm
2ME35
Effects of Two-Step Sintering on MnO2-Doped Zirconia Ceramics
Thevan Raj, Kelvin Chew Wai Jin
Session A10
Venue: E7.03
Time: 10.00am – 12.20pm
10.00am-10.20am
PG04
Modeling of Vienna Rectifier with PFC Controller for Electric Vehicle Charging
Stations
Gowthamraj Rajendran, Chockalingam Aravind Vaithilingam, Oks Prakash
10.20am-10.40am
PG07
Internal Cathodic Protection for Above Ground Storage Tank Using Sacrificial
Anodes
Muhammad N. Jawad, Ghafour Amouzad Mahdiraji, Mohammad Taghi
Hajibeigy
10.40am-11.00am
EUG09
Competency Based-Assessment: Implementation on Manual Polishing
Practice in Housekeeping Department
Yoyoh Jubaedah, Nenden Rani Rinekasari, Neni Rohaeni
11.00am-11.20am
EUG13
Teaching Basic Mathematics and Technology to Elementary Student
Dyah Triwahyuningtyas, Muhammad Nur Hudha, Diyah Ayuning Tyas, Isma
Widiaty, Asep Bayu Dani Nandiyanto, Ida Hamidah
11.20am-11.40am
EUG16
Performance Analysis of Stand-Alone Triple Effect Single Basin Solar Still with
Evacuated Tubes
Reig Hitesh Panchal, Nishant Thakar, Kush Saurin Uday Valmik Patel
11.40am-12.00pm
2EE07
Generating Electricity Through Thermo-Photovoltaic Cells
Mary Robin, Hafisoh
12.00pm-12.20pm
2EE08
Design and Analysis of Self-powered Printed Temperature Sensor
Vince Chow Kwai Yuen, Teh Aun Shih
Session A11
Venue: E7.14
Time: 10.00am – 11.40am
10.00am-10.20am
EUG02
Adsorption Isotherm of Submicron Silica Particle Prepared from Rice Husk
Risti Ragadhita, Asep Bayu Dani Nandiyanto, Willy Cahya Nugraha
10.20am-10.40am
EUG04
Effect of pH Condition on the Production of Well-Dispersed Carbon
Nanoparticles from Rice Husks
Ajeng Sukmafitri, Risti Ragadhita, Asep Bayu Dani Nandiyanto, Willy Cahya
Nugraha
10.40am-11.00am
EUG06
Porous Carbon Particles from Rice Husk and Theirs Adsorption Properties
Meli Fiandini, Risti Ragadhita, Asep Bayu Dani Nandiyanto, Willy Cahya
Nugraha
11.00am-11.20am
EUG15
Establishment of Biological Nitrogen Removal Process for Drinking Water
Treatment in Malaysia
Eng Cheong Wong, Ying Hui Ong, Yee Sern Ng
11.20am-11.40am
EUG18
Effect of Graphene Doping on the Charge Carrier and Thermoelectric
Properties of RCF-Bi2S3 Composites
Priyanka R. Jagadish, Mohammad Khalid, Lau Phei Li, Nowshad Amin, Andy
Chan
Session B1
Venue: E6.02
Time: 1.30pm – 3.10pm
1.30pm-1.50pm
2CE29
Application of Black Liquor Derived Carbonaceous Compound in Direct
Carbon Fuel Cell
Teoh Shu Wei, Yoon Li Wan, Low Jiun Hor
1.50pm-2.10pm
2CE30
Fabrication of 3D-Printed Bone Scaffold of Natural Hydroxyapatite from Fish
Bones in Polylactic Acid Composite
Vickneson A/L Nadarajan1, Eunice Phang Siew Wei Phang, Choo Hui Leng
2.10pm-2.30pm
2CE31
Synthesis and Optimization of Sago-Based Biochemical Value Chain
Wong Weng Pin, Wan Yoke Kin, Leong Yik Teeng
2.30pm-2.50pm
2CE32
Resiliency Analysis in process of glove manufacturing line
Wong Yong Liang, Leong Yik Teeng, Wan Yoke Kin
2.50pm-3.10pm
2CE33
Two-stage Hybrid Pre-treatment of Ultrasound-Assisted Osmotic Dehydration
and Freeze Drying of Momordica Charantia leaves
Wong Zhen Bing, Chua Bee Lin
Session B2
Venue: E6.03
Time: 1.30pm – 3.30pm
1.30pm-1.50pm
2EE01
An Intelligent Algorithm for Stock Market Prediction using Long Short Term
Memory (LSTM)
Ang Zhe Han, Edwin C.Y. Chung
1.50pm-2.10pm
2EE02
Traffic Monitoring using Bluetooth Signals
Bryan Chang Xien Qiang, Edwin C.Y. Chung
2.10pm-2.30pm
2EE03
Performance Analysis of Microwave Microstrip Ring Sensor for Determination
of NPK Nutrients Contents of Fertilizer
Cheah Yong Jin, Mun Hou Kit
2.30pm-2.50pm
2EE04
Robust Tracking Drone Flight Controller Design for Target Tracking and
Following
Lee Hou Yuen, Phang Swee King
2.50pm-3.10pm
2EE05
Development of Low Computational Power Vision Tracking Algorithm on
Embedded System
Lee Keifer, Phang Swee King, Chew Wei Jen
3.10pm-3.30pm
2EE06
Low Cost Haptic and Motion Based Mixed Reality Peripheral Interface
Lou Wei Jun, Teh Aun Shih
Session B3
Venue: E6.04
Time: 1.30pm – 2.50pm
1.30pm-1.50pm
PG01
Potential Study of Hybrid Drying on The Reduction of Energy Consumption of
Drying Process
Choong Oon Choo, Chua Bee Lin, Mah Siau Hui
1.50pm-2.10pm
PG02
Dilution and ZnCl2 Impact on Eutectic Solvents as Devulcanizing Reagent in
De-linking Phenomena of Waste Ground Rubber Tire
Ricky Saputra, Rashmi Walvekar, Mohammad Khalid
2.10pm-2.30pm
EUG14
Steady Flow of Power-Law Fluids Past a Sphere in a Tapered Tube
Lubhani Mishra, R. P. Chhabra
2.30pm-2.50pm
EUG19
Feasibility Study of Phosphonium-Based Ionic Liquids As Energy Efficient
Solvents for Extractive Desulfurization of Liquid Fuels
Swapnil Dharaskar, Kailas Wasewar, Mika Sillanpaa
Session B4
Venue: E6.05
Time: 1.30pm – 3.30pm
1.30pm-1.50pm
PG03
Validation of Finite Element Model of Human Lumbar Vertebrae under
Mechanical Forces
Palaniswamy Mohankumar, Anis Suhaila Shui, Ng Khai Ching, Shajan Koshy,
Karuthan Chinna, Chin Seong Lim
1.50pm-2.10pm
PG05
A Review of Transformative Learning Theory with Regards to its Potential
Application in Engineering Education
Douglas Kum Tien Tong, Satesh Narayana Namasivayam, Logendra Stanley
Ponniah
2.10pm-2.30pm
PG08
Hardware Simulation of Semi-Decoupled Tuning Gain Anti-windup PI
Controllers for Motor Speed Application
Thong Ling Chiah, Choon Lih Hoo, Chin Yau Chung
2.30pm-2.50pm
EUG01
Simulation Quality Factor of Microring Resonator Concentration Glucose
Sample 0 – 1.5%
Cahya Julian, Budi Mulyanti, Lilik Hasanah, Ahmad Aminudin, Roni Sumantri,
Ananda Aransa
2.50pm-3.10pm
EUG03
Simulation of Hemoglobin Detection Using Surface Plasmon Resonance
Based on Kretschmann Configuration
Roni Sumantri, Cahya Julian, Ananda Aransa, Lilik Hasanah, Ahmad
Aminudin, Budi Mulyanti
3.10pm-3.30pm
EUG05
Simulation of Microring Resonator Based on Racetrack Shaped
Configuration For Glucose Sensing
Ananda Aransa, Cahya Julian, Roni Sumantri, Lilik Hasanah, Ahmad
Aminudin, Budi Mulyanti
Session B5
Venue: E6.16
Time: 1.30pm – 3.30pm
1.30pm-1.50pm
EUG07
Commercial Automatic Voltage Stabilizer (AVS) and Programmable
Automatic Voltage Stabilizer (PAVS) Comparison Performance
Doni Fajar Ramadhan, In Mustagisin, Sriyono, Ade Gafar Abdullah, Agus
Solehudin, Ida Hamidah
1.50pm-2.10pm
EUG08
Assessment of Student Competence Using Electronic Rubric
Ana Ana, Cica Yulia, Yoyoh Jubaedah, Muktiarni Muktiarni, Vina Dwiyanti,
Asep Maosul
2.10pm-2.30pm
EUG10
Water Quality Monitoring in Citarum River (Indonesia) Using IoT (Internet of
Thing)
Lazuardi Fenjano, Budi Mulyanti, Rizki Dwi Purnomo, Arjuni Budi Pantjawati,
Roer Eka Pawinanto and Asep Bayu Dani Nandiyanto
2.30pm-2.50pm
EUG11
Design and Fabrication of Fiber Optic Chemical Sensors (FOCS) System for
Salinity Detection of NaCl Solutions
Eris Rifaldi, Budi Mulyanti, Gandi Sugandi, Arjuni Budi Pantjawati, Lilik Hasanah,
Roer Eka Pawinanto, Asep Bayu Dani Nandiyanto
2.50pm-3.10pm
EUG12
Speed Adjusment Simulation Using Voltage Divider Circuit
In Mustagisin, Doni Fajar Ramadhan, Sriyono, Ade Gafar Abdullah, Agus
Solehudin, Ida Hamidah
3.10pm-3.30pm
EUG17
Smart Vehicle Headlights Control System
Suresh Manic Kesavan, N. Hasoon Feras
THE 12TH EURECA 2019 COMMITTEE
STEERING COMMITTEE
Conference Chair
Prof. Ir. Dr. Satesh Namasivayam
Past Head of School, School of Engineering
Ir. Dr. Siva Kumar A/L Sivanesan
Acting Head of School, School of Engineering
Co-Chairs
Assoc. Prof. Dr. Mohammad Hosseini Fouladi
Ir. Eunice Phang Siew Wei
ORGANISING COMMITTEE
Chair
Assoc. Prof. Dr. Rashmi Gangasa Walvekar
Co-Chair 1
Dr. Phang Swee King
Co-Chair 2
Dr. Yoon Li Wan
Secretary
Dr. Chow Yin Hui
Treasurer
Dr. Anis Suhaila Shuib
Event Manager
Dr. Low Jiun Hor
Members
Assoc. Prof. Ir. Dr. Ng Khai Ching
Dr. Chew Wei Jen
Dr. Chou Pui May
Dr. Chua Bee Lin
Dr. Emy Marlina Samsudin
Dr. Hafisoh Ahmad
Dr. Hoon Yap
Dr. Kelvin Chew Wai Jin
Dr. Ku Pei Xuan
Dr. Leong Yik Teeng
Dr. Lim Joon Hoong
Dr. Mun Hou Kit
Dr. Oh Kai Siang
Dr. Pang Ming Meng
Dr. Tee Lee Hong
Dr. Wan Yoke Kin
Ms. Nurhazwani Ismail