International conference on High Technology for ... · IEEE Bulgarian Section Federation of the...
Transcript of International conference on High Technology for ... · IEEE Bulgarian Section Federation of the...
International conference on
High Technology for
Sustainable Development
HiTECH 2018
PROGRAMME
11 – 14 June 2018
Sofia
National Science and Technical Centre
108 Rakovski Str.
2
International conference on High Technology for
Sustainable Development
HiTECH 2018
Organized by:
Technical University of Sofia (TU-Sofia)
IEEE Bulgarian Section
Federation of the Scientific and Technical Unions in Bulgaria
(FSTU)
University of Technology of Troyes
In cooperation with:
Institut Francais Bulgarie
The Union of Electronics, Electrical Engineering and
Communications (CEEC)
3
International conference on High Technology for
Sustainable Development
HiTECH 2018
Honorary chairmen:
Georgi MIHOV – TU - Sofia
Conference chairmen:
Kiril ANGUELOV, TU-Sofia
Scientific Secretaries:
Iliana MARINOVA, TU-Sofia
Local Organizing Committee:
Stefan PATCHEDJIEV, CEEC
Kiril ALEXIEV, Bulgarian IEEE Section
Rossitza GOLEVA, Bulgarian IEEE Section
Katya Asparuhova, Bulgarian IEEE Section
Nikolay HINOV, Bulgaria
Kidiyo KPALMA, France
Roumen KOUNTCHEV, Bulgaria
Joseph RONSIN, France
Kazumi NAKAMATSU, Japan
Nikolay MIHAILOV, RU-Rousse
Abdel-Badeeh SALEM, Egypt
Christian-SCHAEFFER, France
Nadege TROUSSIER, France
Ludmil STOYANOV, Bulgaria
Georgy POPOV, Bulgaria
Agata MANOLOVA, Bulgaria
Program Committee:
Slavoljub ALEKSIC, Serbia
Alexander ALEXANDROV, Bulgaria
Chavdar ALEXANDROV, Bulgaria
Gancho BOJILOV, Bulgaria
Grigore CIVIDJIAN, Romania
Octavian CORNEA, Romania
Peter DINEFF, Bulgaria
Bruno FRANCOIS, France
Fernando GARCIA, Spain
Zeljko HEDERIC, Croatia
Nikolay HINOV, Bulgaria
Nikolay HRISTOV, France/Bulgaria
Barna IANTOVICS, Romania
Yasushi KANAI, Japan
Kidiyo KPALMA, France
Antonios KLADAS, Greece
Roumen KOUNTCHEV, Bulgaria
Vladimir LAZAROV, Bulgaria
Iliana MARINOVA, Bulgaria
Ivan MASLAROV, Bulgaria
Nicolae MUNTEAN, Romania
Kazumi NAKAMATSU, Japan
Ludmila NIKOLOVA, Russia
Kiril ANGUELOV, Bulgaria
Antero ARKKIO, Finland
Laura BACALI, Romania
Aleksander BEKIARSKY, Bulgaria
Gilles NOTTON, France
Vassil PALANKOVSKI, Austria
Ioan POPA, Romania
Maurizio REPETTO, Italy
Joseph RONSIN, France
Sergey RYVKIN, Russia
Yoshifuru SAITO, Japan
Abdel-Badeeh SALEM, Egypt
Christian-SCHAEFFER, France
Wlodzimierz SROKA, Poland
Dimo STOILOV, Bulgaria
Stoyko STOYKOV, Bulgaria
Rima TAMUSHIUNIENE, Lithuania
Atanaska TENEVA, Bulgaria
Hannes TÖPFER, Germany
Nadege TROUSSIER, France
Boriana TZANEVA, Bulgaria
Sergey VOYTKO, Ukraine
Ivan YATCHEV, Bulgaria
Zahary ZARKOV, Bulgaria
Gennadiy ZINOVIEV, Russia
4
General Programme
Day Hour Event
Monday
11 June
16.00 – 18.00 Registration of participants
Tuesday
12 June
09.00 – 10.00 Registration of participants
Hall 4
10.00 – 12.00 Opening Session
Hall 4
12.00 – 14.00 Lunch break, Cocktail-party
Hall 2
14.00 – 16.00 Invited Papers
Hall 4
16.30 – 18.00 Session 1
Hall 4
16.30 – 18.00 Session 2, Automation, Robotics and Control,
Advanced materials
Hall 2
19.00 – 22.00 Cocktail-party
Sofia, blvd Dondukov 11, restaurant Panorama
Wednesday
13 June
08.30 – 09.45 Session 3, Engineering Management
Hall 3
09.45 – 10.45 Session 4, Education 4.0
Hall 3
10.45 – 11.00 Coffee break
11.00 – 12.00 Session 5, Smart city and smart factory, High
technologies management and Industry
Applications
Hall 3
12.00 – 13.00 Session 6 Electronics
Hall 3 13.00 – 14.00 Lunch break
14.00 – 15.30 Session 7 Electrical machines and apparatus
Hall 3 15.30 – 15.45 Coffee break
15.45 – 17.15 Session 8 System Engineering, Computer
Technologies, Telecommunications Engineering Hall 3
17.15 – 17.30 Closing Session
Thursday
14 June
10.00 – 14.00
Cultural Events
5
Opening Session
Hall 4, Tuesday 12 June
10.00 - 12.00.
10.00 - Opening Session
Invited Papers
Hall 4, Tuesday 12 June
14.00 - 16.00.
Session 1
Hall 4, Tuesday 12 June
16.30 - 18.00
Chairpersons: Roumen KOUNTCHEV, Dimo STOILOV, Nikolay HINOV
1. PRODUCTION STRUCTURE OPTIMIZATION FOR THE BULGARIAN POWER
SYSTEM
Dimo Stoilov, Konstantin-Kiril Savov, Kristina Hadzhiyska, Vesselina Trashlieva, Plamen
Tzvetanov
2. INFRARED ARRAY SENSOR WIRELESS NETWORK
Kalin Dimitrov, Yuliyan Velchev
3. SOME ASPECTS FOR THE INTEGRATION OF SENSOR NETWORKS IN CLOUD
STRUCTURES
Filip Tsvetanov, Martin Pandurski
4. MECHANICAL RESPONSE OF A FRICTIONAL SEISMIC ISOLATOR
Todor Zhelyazov, Karl DEBRAY
5. A COMPUTATIONAL APPROACH TO TEACHING THE IS-LM MODEL
Iordan Iordanov, Andrey Vassilev
6. VIRTUAL GAMING PLATFORM CUSTOMER EXPERIENCE EVALUATION
Roumiana Ilieva, Kiril Angelov, Vladislav Lazarov, Violeta Goleshevska
7. A CYNEFIN FRAMEWORK FOR AGILE DECISION MAKING OF AI BOTS
Roumiana Ilieva, Kiril ANGELOV, Mario NIKOLOV
6
Session 2 Hall 2, Tuesday 12 June 16.30 - 18.00
Chairpersons: Boriana TZANEVA, Pancho TOMOV
Automation, Robotics and Control
Pancho Tomov Possibilities for implementing production "automation islands" in an automatic production system
Bogdan Gilev Modeling the vehicle traction system and developed neural predictive controller
George Popov
Estimation of Hard Real-Time System Workability
Nikolay Brayanov
Aleksandar Balevski
George Popov Use a System Diversity as Tool for Identification
Veska Georgieva
A Nonlinear Moving Target Tracking Control of Nonholonomic Wheeled Mobile Robots Plamen Petrov
Reneta Parvanova Mariyana Todorova
Identification of the parameters of a dual-mass DC electromechanical system using Daubechies wavelets
Advanced materials
Mihaela Georgieva Obtaining of copper coatings on dielectrics from non-formaldehyde electroless copper plating bath
Vesselina Milusheva
Effect of treatment in copper (ii) electrolyte on the structure of a copper/alumina nanocomposite
Tobia KARAGYOZOV
Boriana TZANEVA
Valentin VIDEKOV
Boriana Tzaneva Georgi Todorov Rayna Dimitrova Chemical and electrochemical growth of hydroxyapatite on 3D machined titanium alloy
Session 3
Hall 3, Wednesday 13 June, 08.30 – 09.45
Chairpersons: Kiril ANGUELOV, Ognian ANDREEV
Engineering Management
Kiril Anguelov Research and Evaluation of Factors and Sub-Factors That Affect on the Timeliness and Reliability of Deliveries and Their Importance for the Efficiency of the Logistic Processes Rossitza Kenova
7
Miglena Angelova
Cultural and creative business through investment plan for Europe Tsvetana Stoyanova
Valentina Alexieva
Survey of how process modeling works in the Bulgarian organizations
Atanaska Teneva
Petya Yordanova
Atanaska Teneva
Maintaining steady cost projection on wastewater engineering projects in Bulgaria
Valentina Alexieva
Atanaska Tuntova
Atanaska Teneva
Concept model for assessment of the economic security level in food industry enterprises
Valentina Alexieva
Ana Yaneva
Georgi Toskov
E-commerce as a possibility for the HoReCa sector in the Plovdiv region
Ana Yaneva
Iva Bichurova
Hafize Fidan
Consumer’s behavior of restaurant selection
Stanko Stankov
Atanaska Teneva
Tsvetana Stoyanova Miglena Angelova
Impact of internal factors on the competitiveness of business organizations
Ina Nikolova-Jahn Conditions for applying the principles of Total quality management to the requirements of the Fourth industrial revolution
Mina Daskalova Big Data for business - challenges and opportunity for Bulgarian economy
Jordanka Angelova, Vasil Kuzmov Application of Functions in Economic Analysis
Session 4
Hall 3, Wednesday 13 June, 09.45 – 10.45
Chairpersons: Stoyko STOYKOV, Vania DIMITROVA
Education 4.0
Rumen Marinov Dynamics in the theory and practice of the strategic management
Vanya Dimitrova Digitization of education in the field of security
Nataliya Koleva Ognyan Andreev
Aspects of Training in the Field of Operations Management with Respect to Industry 4.0
Malinka Ivanova
Students’ Unsupervised Experience in eAssessment with the TeSLA system Roumiana Ilieva
Stoyko Stoykov
Scientific research in the field of security - problems and solutions Vanya Dimitrova
Stoyko Stoykov Scientific knowledge - sourse of a competitive advantage in security
8
Iordan Iordanov
A computational approach to teaching the IS-LM model Andrey Vassilev
Sergey Krasnov
Problems of quality of education in the implementation of online courses in the educational process
Ekaterina Abushova
Svetlana Kalmykova
Aleks Krasnov
Serhii Voitko The Marshall plan as the path of a country to Industry-4.0
Ivan Nedyalkov Alexey Stefanov Georgi Georgiev E – learning for IP – based telecommunication networks
Kiril Anguelov, Maria Ivanova Impact factors in implementation of EU-Funded Projects in Bulgarian Higher Education Institutions
Session 5
Hall 3, Wednesday 13 June, 11.00 – 12.00
Chairpersons: Ina NIKOLVA JAHN, Ivan DIMITROV
Smart city and smart factory
Ivan Dimitrov Buyer-supplier relationships impact on supplier’s business processes improvement
Lazar Lazarov General terms and conditions for the radio connection jamming
Ventsislav Ivanov Smart People Recruiting
Arga Putra Panatagama Analysis of New Hospital Development Based on Rooms Availability Compared to Population Density to Support Smart Governance Planning (Case Study: Bogor City)
Octavian Wibawa Reksa
Noer Widya Herlambang
Ina Nikolva Jahn
Creating conditions for application of digital dimensions in logistics activity
Siyka Demirova
Emil Entchev
Dimitar Damianov Principles of designing automated logistics systems - hybrid component of cyber-physical systems Siyka Demirova
Siyka Demirova Integration levels of company logistics in intelligent manufacturing
High technologies management and Industry Applications
Pancho Tomov
Approach for development of real-time marshalling yard management system
Lubomir Dimitrov
Sanel Purgich
Mirena Todorova
9
Mihail Draganov
Marking 5.0. Transactions of artificial intelligence systems in the digital environment
Miglena Panicharova
Neziha Madzhirova
Anna KNIAZEVYCH Serhii KRAICHUK Natalia OSTAPCHUK The Concept of Management of the Development of National Innovation Systems
Session 6
Hall 3, Wednesday 13 June, 12.00 – 13.00
Chairpersons: Nikolay HINOV, Hristo TARNEV
Electronics
Gergana Vacheva
Development of control strategy for charging electric vehicles in micro and nanogrid
Bogdan Gilev
Nikolay Hinov
Nikolay Hinov
Evaluation and verification of series resonant converter with transformer operating regimes Tsveti HRANOV
Hristo TARNEV
Numerical modeling of the electromagnetic system in an induction brazing system
Dragomir Grozdanov
Nikolay Hinov
Nikolay Hinov Bogdan Gilev Modeling of series resonant dc-dc power converters
Session 7
Hall 3, Wednesday 13 June, 14.00 – 15.30
Chairpersons: Iliana MARINOVA, Bohos APRAHAMIAN
Electrical machines and apparatus
Valentin Mateev
High voltage bushings seismic analysis
Georgi Ivanov
Iliana Marinova
Iliana Marinova
Coaxial magnetic gears losses Valentin Mateev
Valentin Mateev
Machine learning for magnetic fields Iliana Marinova
Ivan Hadzhiev
Conjugate heat transfer analysis using 3D FEM model of an oil-immersed distribution transformer
Emil Mechkov
Ivan Yatchev
Bohos Aprahamian
3D modeling of the magnetostatic field in separation apparatus Tatyana Dimova
10
Maik Streblau
Bohos Aprahamian
Analysis of the thermal process of volume induction heating in continuous working regime
Maik Streblau
Tatyana Dimova
Ilonka Lilyanova
Investigation of electrodynamic forces in a flat induction system
Mariya Marinova
Marin Marinov
Pavel Andreev Investigation of the battery life versus the broadcast interval for abeacon_46bf
Renewable energy and power quality
Zahari Zarkov
Theoretical and experimental study of interleaved non-inverting buck-boost converter for RES
Ivan Bachev
Ludmil Stoyanov
Vladimir Lazarov
Ludmil Stoyanov
Methods for energy production estimation from photovoltaic plants: review and application
Iva Draganovska
Zahari Zarkov
Vladimir Lazarov
Kamen SEYMENLIYSKI
Reducing the environmental impact of electrical installations
Eldar Zaerov
Radoslav SIMIONOV
Silviya LETSKOVSKA
Silviya LETSKOVSKA Eldar Zaerov Kamen SEYMENLIYSKI Stefan MIKHOV Environmental influence on renewable sources productivity
Economic generation, transmission, distribution, conversion, measurement and
control of electric energy
Vikas Gaikwad
Matlab Modeling of a Real Grid for Fault Analysis
Angel Tcolov
Ivan Yatchev
Dimitar Georgiev Modelling of Underground Cables
11
Session 8
Hall 3, Wednesday 13 June, 15.45 – 17.15
Chairpersons: Alexander BEKIARSKI, Veska GEORGIEVA
System Engineering, Computer Technologies
salma boumiza
Developmen of simulation models for interactive Audiovisual contraol of students in the e-learning environment
Alexander Bekiarski
Dalila Souilem
Snejana Pleshkova
Ivan Nedyalkov
Modeling and studying of cloud infrastructures
Alexey Stefanov
Georgi Georgiev
Joseph RONSIN Kidiyo KPALMA Hua LU Mingqiang YANG
Facial identification and macro expression recognition with a new textural featuring approach
Telecommunications Engineering
Veska Georgieva
Prostate segmentation in ultrasound images using hybrid method
Antonia Mihaylova
Plamen Petrov
Veska Georgieva
A Multistage Approach for Detection of Objects with Rectangular Forms
Plamen Petrov
Lubomir Dimitrov
Snejana Pleshkova
Secure audio information transmission with encryption algorithms in pki.
Dimitar Kinanev
Alexander Bekiarski
Ivan Nedyalkov Alexey Stefanov Georgi Georgiev Characterization of the traffic in ip-based communication networks
12
INFORMATION
The presented papers will be submitted for inclusion in the IEEE Xplore on-line digital
library.
ДНТ