Interlope africa company profile

INTERLOPE AFRICAR e g n o : 2 0 1 3 / 0 6 3 4 2 0 / 0 7

INTERLOPE AFRICA

Interlope Mining Solutions Pty Ltd • 19 Crn Kruger and Human street • Office 103 • Old Absa Building • Krugersdorp

Tel: 011 692 4528 / 011 660 7422 • Fax is 086 218 7699 • Email: [email protected] • Web: www.interlopeafrica.co.za

Company ProleCompany Prole


INTERLOPE AFRICA

INDUSTRIES SERVED ARE

Page 1


INTERLOPE AFRICA

Power Plant Coal Mining

Port Transportation Chemical Plant

Cement Plant Steel Plant



Wedge wrapped V-belts offer high t r a n s v e r s e st i f fness and a t r a n s m i s s i o n power 50-100%higher than classical V-belts. the transmission limiting velocity constant reaches 40m/s and the transmission efciency over constancy? .90MARKING: Wedge wrapped V-belts is divided into two categories: the metyic SP include 3V(9N),5V(15N)and 8V(25N)Models. V-belts of these types are marked according to the outside length of factory V-belts. Specic noting should be made on the order list if the customer ha s sp ec ia l req u i re me nts . The l en gth conservation table is available for conversion between various models.

Belt conveyers is the production made no joint belt ,which is characterized with core no joints ,adhesive tape surface smooth ,uniform tensions the tape running smoothly, the use of small elongation.

USAGE: Owing to space limitation or in case of lifting materials at large slope, raised edge conveyor belt is often used to prevent scatter of convinced materials. It is suitable for conveying materials at a large slope from 0 degree to 90 degrees

CHARACTERISTICS:1. When the material is convinced, can realize large angle to 9002. Large conveying capacity, the material will not be scattered.3. From the horizontal to inclined, the tilt to level angle transition shift transmission.4. Conveyor has the advantages of simple structure, exible layout, and small occupied area.

The carcass material and strength of the belt can be selected according to requirements of users; we have the following carcass materials: Cotton (CC), Nylon (NN), and Polyester and nylon (EP).

WEDGE WRAPPED V BELT ENDLESS CONVEYOR BELT

SIDEWALL CONVEYOR BELT

CHARACTERISTICS: Ordinary at belt is also known as the drive belt, generally use high-quality cotton as the skeleton Layer, canvas, rub the surface of paste for the compound, then the multilayer canvas together constitute a at belt, at belt has the advantages of high strength, aging resistance ,exibility good, use small elongation and other excellent performance. Mainly used for mining, metallurgy, port. It is also widely used in mechanical transmission where large power rice processing, agricultural irrigation, timber cutting and other industrial and agricultural power equipment in power equipment plays a more and more important role.

CHARACTERISTIC:1. Flat belt cutting edge and adhere to the production of several layer of canvas air conduit together, with sides cut form, with the edge surface are coated with rubber paste.

FLAT TAPE

Page 2


INTERLOPE AFRICA



STEEL CORD CONVEYOR BELT

USAGE: Steel wire rope core conveyer belt,

suitable for high strength long distance largecapacity occasions for conveying materials, under special circumstances, also suitable for high strength, short distance transportation.

CHARACTERISTICS:1. High tensile strength: the belt is suitable for large span, long distance transportation of materials.2. Little elongation: required tight short stroke. 3. Drive roller with steel wire rope diameter is small: a layer is longitudinally arranged in the core skeleton, ex fatigue. It can be equipped with smaller diameter roller, so that the equipment is compact.4. Rubber and steel wire rope adhesion is good: steel wire galvanized surface, at the same time with rubber excellent adhesion with the steel wire rope, and wire rope adhesive impact resistance, not easy to fall together, block, the use of the original long life.5. Wire rope tension uniform: because of advanced manufacturing technology, wire rope arranged uniformly, tension, balanced running, without deviation.6. Channel performance: core without transverse frame, easy to form a deep trough, loading material, and prevent the scattered.7. Available x ray inspection: the skeleton wire rope on the conveyor, available X ray aw detection, prevent the matter to occur.

POLYESTER CONVEYORPolyester belt is also called the EP conveyor belt, its tensile strength is t h e p o l y e s t e r , polyamide weft interwoven into the canvas, i ts characteristic is the low elongation and zonal good channel performance, good water resistance, wet strength is not reduced, not mildew, initial modulus polyester higher, desirable safety coefcient is low, suitable for long distance high load, high speed conditions for conveying materials.

NYLON (NN) CONVEYOR

Nylon is a rubber industry is the one of the best v a r i e t y p e r f o r m a n c e synthetic bre, the structure of longitude and l a t i t u d e a r e

Nylon Braided, most versatile foretaste, the most prominent advantage is good wear resistance, high fatigue resistance, nylon canvas conveyor belt, high strength, impact resistance, into a good groove, interlayer adhesion force ,features excellent ex and long service life, suitable for long distance less, high load, material conveying speed conditions, widely used in mining, metallurgy, construction, ports and other industries.


INTERLOPE AFRICA



ELECTRICAL DIVISION

LIGHTING

T8 1.2Mwarmwhite- CCT:3000-3500K

Naturewhite - CCT:4000-5000KDaywhite- CCT:6000-6500K

CHARACTERISTICS:• Dimension: Φ26*30*L1200mm• Led Qty ( pcs): 96 120• Power: (w) 18 20• Luminous Flux(lm): 1800• View Angle: 120°• Power Factor: >0.90• Material: Aluminium Alloy and PC• Voltage: 85-264V AC• Working time: >35000 hours

GET T8 1.2m: T8 1.5m: T8 1.8m: T8 2.4m

ALL IN STORE AND JUST STATE YOUR WATTAGE

18W LED CONE LAMP & 6W LED CONE LAMP

T8 Led tube 12VDC T8 Fixture 1.2m Single tubeGET T8 Fixture 1.2m: T8 1.5m:

ALL IN STORE FOR YOU

Material: Aluminum AlloyIron thickness: 0.4mmCover: powder-coated ONE SIDE electricityL2426m*W30mm* H20 mm For single tube

Material: Aluminium AlloyIron thickness: 0.4mmCover: powder-coatedONE SIDE electricityL1826m*W30mm* H20 mm for single tube

Find Various wattages “In clear and Green”

colour: 6 W,8W ,10W,12W,18W,20W,24W,

40W and 60W.

INTERLOPE MINING SOLUTIONS ELECTRICAL CONTRACTORS & SUPPLIES DIVISION

T8 FIXTURE 1.8M

Page 4


INTERLOPE AFRICA



18 W Normal Lights 6 W Normal Lights

Input Voltage: A C85-264V

* Wattage: � �� 1 50W±5%

* LED Qty/Typ: 3*50W

* Luminous Flux: 14000LM ±5%

* Beam Angle: 120°

* Dimension: L400*W230*H150mm

WARNINGFLASHING LIGHTSRECHARGEABLE

INTERLOPE MINING SOLUTIONS ELECTRICAL CONTRACTORS & SUPPLIES DIVISION

LED FLOODLIGHT 50 to 150W

1 Rechargeable Surround LED Stope Light System

2 Rechargeable Compact Surround LED Light

System

3 Rechargeable Heavy Duty Surround LED Light

System

4 Rechargeable 222 LED Area Light System

5 Personal LED Work Light - Rechargeable

6 Portable, Rechargeable High Power Mining LED

Light

7 Cap Lamp Powered 222LED Light Units

8 Rechargeable, High Power 18W LED Work Light

Units

9 High Intensity LED Flood Lights

10 Critical Area LED Light with Back Up Battery

11 Emergency Back-up LED Light Systems

12 G24 Haulage Illumination String Light Systems

13 G24 Plug & Operate Gully Illumination Light

Systems

14 LED Strip Rope Lights

15 LED Fluorescent Replacement Tube

Lights

16 Vapour, Dust and Corrosion Proof

Fluorescent Light Units

17 Energy Saving Replacement Bulbs

18 32VAC Winch Lights

Intrinsic Safe Compact Rechargeable Strip LED Light Systems


INTERLOPE AFRICA

Find normal lights from:

5W,7W,9W,12W,16W and 18W



ELECTRICALELECTRIC MOTORS

Main White/Red Lamp Current = 820mA ± 10%

Dimmed White Lamp Current = 82 mA ± 10%

Standby “OFF” Current = 12uA Typical

Battery Type = Lithium-ion

Battery Construction = 3x3 cell array

Battery voltage = 11.8volts Nominal

Battery Capacity = 6.6 A/Hrs

Battery protection:

- Cell balance

- Under voltage cut-off

- Over Charge cut-off

Charge Current = 3.0 Amps Max

Charge time = 3 Hrs Max

Charge pins output = Diode protected

Charging Voltage = 12.9 volt

“Find Me” strobe repetition rate = 50 – 70 Seconds

“Find Me” strobe pulse length = 30 – 50 Milliseconds

MECHANICALWeight = 1087g

Dimensions

(L)Length - 290mm

(H)Height - 100mm

(HB)Height Bracket - 135mm

Case Materials;

Handle - Carbon re-enforced nylon

End caps - ABS

Optical Tube cover - Clear polycarbonate

Environmental Protection

DISTRIBUTION BOXES

Supply of Electrical Products

Electrical Toolbox

Page 6


INTERLOPE AFRICA



SOLAR POWERED LIGHTS

1- Solar Power Area Illumination2- Solar Powered Robot Units & System

VEHICLE LIGHTS

1- LED High Intensity Vehicle Lights2- LED Vehicle Warning Lights

SEARCH & INSPECTION LIGHTS

1- Handheld Inspection Lights2- Vehicle Roof Mounted Xenon HID Search Light3- Rechargeable Flash Lights4- Micro, Rechargeable, High Power LED Work & Inspection Light

SEARCH & INSPECTION LIGHTS

1- Handheld Inspection Lights2- Vehicle Roof Mounted Xenon HID Search Light3- Rechargeable Flash Lights4- Micro, Rechargeable, High Power LED Work & Inspection Light

HOPPER LIGHTS

1- Rechargeable Dual Colour LED Hopper Light2- 24V Dual Colour LED Hopper Light

SAFETY & WARNING LIGHTS

1- Flashing LED String Lights2- Dual Colour LED Robot Units & Systems3- Starter Box Status Warning LED Light and Siren Unit4- Dual Colour LED Indication Units5- Vehicle Proximity Warning System

ELECTRICAL DIVISION

WINCH STARTER BOX525 VAC 37KW 3 PHASE WINCH SWITCHER WITH 32

NO VOLT COILS FOR 525VAC37//55kW&75kW 3 PHASE

WINCH STARTER BOXES37/55kW No VoltCoil 75kWNo Volt Coil

LED StripLED Strip LED StripCABLES

CUSTOMISED STARTER BOX PER YOUR NEED

ELECTRONIC MEASURE EQUIPMENT

LIGHTING DIVISION


INTERLOPE AFRICA

TransformersUPS




INTERLOPE AFRICA



ELECTRICAL DIVISION

WE SUPPLY, INSTALL AND ALSO DO MAINTENANCE OF GENERATORS

At client Slab preparationAt factory

Generator slab

PLEASE NOTE WE DO ALL OTHER ELECTRICAL RELATED SERVICES:

e.g. supply and install of all electrical appliances Repair of all Electrical appliances

LET US PROVIDE YOU WITH ENERGY SOLUTIONS

EMERGENCY POWER BULB

Power : 5W Lumen : 240-260LMCRI : 70Power in Emergency : 5WLED�� : 35pcs 2835SMDVoltage��: AC85-265VSize : H120X70mmColor : White/Warm white/Cold WhiteEmergency time : 3hours

Function : emergency, rechargeable, flashlight,strobe,distress signal(SOS),camping, readingLamp size : 60*114mm, 60*150mm(stretch)Lifespan : 35,000hoursWarranty : 1 year

Input Voltage : AC90-265V/50-60HZLuminous : 240-280LMCCT : 3000-3200K/4000- 4500K/6000-6500KLamp Base : E27/B22Beam Angle : 160°LED Chips : SMD2835CRI>75Ra Automatically Emergency, neen’t remote controlCharge time : about 5hrsEmergency time : up to 3hrsBattery : 1pcs Lithium battery/1800mAFunction: emergency, rechargeable, flashlight, strobe, distress signal(SOS),camping,readingLamp size : 60*114mm, 60*150mm(stretch)Lifespan : 35,000hoursWarranty : 1 year

Dual Purpose


INTERLOPE AFRICA



GENERAL CATALOGUE EXCLUDING

Model: WTJD-6S

Application

1. Metal and non-metal mineral prospecting 2. Underground water survey and prospecting 3. Environment survey, engineering exploration, geothermal exploration, mine goaf, geology disaster survey etc.

Main technical specicationsHigh voltage input: <900V

Current input: <6000ma

Input protection: overvoltage, overcorrect protection deviceMax transmitting power: 6000WSelf-electricity alignment: ±2500mvPower supply waveform: 1-60s, duty ratio: 1:1Test range: ±4000mvVoltage resolution: 0.01uvCurrent resolution: 0.02uaInternal memory: 2GB( 32GB extensible)Power supply: 14.8V 5200mah Lithium batteryWorking ambient temperature: -10°C~+50°C

EXPLORATION DIVISION

INTERLOPE MINING SOLUTIONS EXPLORATION DIVISION

Model: WTDF-2Features1. Fast and high work efciency, 10 times faster than the human DC electric prospecting apparatus2. Light in weight, easy to carry3. Easy operation, human friendly HMI4. High performance amplier and imported core parts, high performance AD converter5. Wide frequency range, greatly improve the prospecting depth6. Strong disturbance ability, high performance wave trap, 5 steps gain control, suitable to operate in various kinds of geology environment.7. Thin-lm switch panel, ABS enclosure, nice appearance, durable in use

Technical specications1. Voltage input range: ±4V2. Frequency input range: 5-3000HZ3. Frequency test range: 5-3000HZ (constant frequency mode)4. Resolution: 0.001mV5. Repeated test error: ±1% ±1LSB

6. A/D conversion: 16-bit, 1Msps7. Input electric resistance: > 80MΩ8. 50Hz inhibiting ability: > 80dB9 .Data storage: 48W unit data, automatic storage, can display curve and data10. Display: 240×128 LCD11. Data port: USB 2.012. Power supply: DC7.2V 4800mAh13. Power: 300mA14. Working temperature range: -10°C~+50°C15. Suitable working humidity: < 95%16. Main machine weight: 2.5kg17. Main machine size: 310×230×108mm

PORTABLE NATURAL ELECTRIC PROSPECTING APPARATUS

DIGITAL INTENSIFICATION POLARIZATION(IP) INSTRUMENT

Page 10


INTERLOPE AFRICA



Technical specicationsOil consumption: 0.45L/HCore drilling diameter: 20mmDrill diameter: 26mmRotation speed: 1820 rpmDrilling depth: <20mDrilling power: 1.5HP (full speed operation)

MOBILE GASOLINE POWERED DRILLING RIG, PORTABLE DRILLING RIG

Main technical specications d r i l l i n g m ode: H i - s pee d rotation cutC i rcu la r med ium: c lean w a t e r , m u d F i n a l h o l e diameter: 46-60mm Max.

Drill depth: ≤5M Dynamic head rotation speed: 300-800 r/minDynamic head travel: 600mmPower: 5.5HPNet weight: 33 kg

Main features

Wire synchronization technology, suitable for mountain area, complicated geological environment IGBT bridge circuit reaches large power, rapid shut-off light electromagnetic transmitter.

Technical specications Transmitter

Power supply: DC 4V~150V

Rated output power: 3Kw Max. Output voltage: 150V Max. Output current: 50A (Continuous), 70A(

pulse) Frequency range: power supply 1.25~125Hz (8 frequency points) Output waveform: two modes (0 and 1) Shut-off time: variable as the loading coil change

Min. shut-off time: 1.2µs, pure resistance loading

Synchronization mode: wire synchronization Overall size: 360mm×250mm×250mm Weight: 9kg Receiver Overall size: 324mm×210mm×230mm Weight: 7Kg (without battery)

Sampling frequency: 5 µs fastest, optional

Dynamic range: 156db Overlay times: 1-9999 optional Bandwidth: DC to 30 Khz Synchronization mode: wire SUNC

BACKPACK TYPE DRILLING RIG, MOBILE DRILLING MACHINE, GEOLOGY EXPLORATION EQUIPMENT

PORTABLE TRANSIENT MAGNETIC ELECTRIC APPARATUS FOR COMPLICATE GEOLOGICAL

CONDITION Model: DZK-EMA03


INTERLOPE AFRICA



Technical specications Receiver 1. A/D converter: 16Bit 1M/s 2. Sampling rate: 1us, 4us, 16us 3. Dynamic range: 140dB 4. Background noise: <1uV 5. RAM: 128M 6. Hard disk: 40G 7. Port: USB, Parallel port, serial port, network cad 8. Display: colourful TFT 9. Main amplier gain: 1/10/100/1000 10. Stacking times: 1-9999 11. Channel number: 2 12. Test channel number: free programming 13. Transmission band: 0-400kHz Transmitter

1. Transmission current: 1-60 adjustable 2. Current transmission frequency: 225, 75, 25, 12 .5, 6. 25 ms 3. Max. Transmission power: 12 KW 4.Output

voltage: 12-96 (v)5. Shut-off time: 1-300 us 6. Delay range: 1us-160ms 7. Input voltage: DC 12-96V 8. Transmission waveform: biopolar rectangular wave 9. Transmission coil: 5*5-300*300 for single-turn

TRANSIENT ELECTROMAGNETIC

ELECTRIC PROSPECTING APPARATUS MODEL:

DZK-EMA-02

MINING EXPLOSION-PROOF

INTRINSIC SAFETY TRANSIENT

ELECTROMAGNETIC APPARATUS MODEL:

DZK-EMA01

SMALL BORE COMPASS INCLINOMETER, WELL LOGGING INCLINOMETER, DRILLING INCLINOMETER MODEL: LCX-2

Specications

Technical specications Master controller: Industry personal computer A/D converter: 16 bit Sampling rate: 1us, 4us, 16us Dynamic range: 140dB Background noise: 1uV RAM: 512MB Hard disk: 1GB Extension disk Port: USB, parallel port, series port, network card Display: 8.4inch TFT LCD and Transmitting current:

<2.5A

Current pulse width (ms): 10, 20, 40 and Current transmission frequency: 75, 25, 12. 5, 6.25(Hz) Transmission coil size: 1X1m~3X3m and Shut-off

time: 0.5~300 (ms)

The small-bore compass inclinometer is specially used to test vertex angle and azimuth in drilling process, it uses overhanging to test vertex angle, magnetic needle orientation to test azimuth, it’s suitable for non-magnetic rock stratum and ledge, diameter larger than 46mm, it’s widely used in engineering, hydrology, coal, metallurgy, petroleum, geology area. It’s kind of very common geology surveying instrument.

Main technical specications

1. Vertex test range: 0°~50°,error ±1°(0°~30°), ±2°(>30°)

2. Azimuth test range: 0°~360°, error:±4°( when

vertex angle >4°)

3. Sealing performance: >15Mpa of hydraulic

pressure

4. Overall size: Ø40mm×1230mm, weight: 6kg 5. Working time: Max. 120min for mechanical timing set, Min. 20mins

Page 12


INTERLOPE AFRICA



Descr ipt ion: The wireless digi ta l compass inclinometer is specially used to test azimuth and vertex angle during drilling, it’s suitable for non-magnetic rock stratum and ledge, diameter larger than 46mm, it’s widely used in engineering, hydrology, coal, metallurgy, geology area, it’s kind of very common geology surveying instruments.

Technical specications

1. Vertex angle test range: 0°~50°/±0.5°

2. Azimuth test range: accuracy: 0°?360°

( Vertex angle ?4°)

3. Sealing ability: ?15Mpa of hydraulic pressure

4. Overall size: Ø40mm×1230mm, Weight: 6kg

5. Working time: ?120mins

6. Work temperature: -20°C ~ +85°C

7. Power supply: DC 9V, Handle controller: 4pcs 5# battery

The Smart three component ux gate magnetometer is widely used for ground magnetic prospect of iron ore, non-ferrous metal ore, also for roadway and tunnel of iron and other metals ore, petroleum and coal, magnetic mixture ore as well. (Technical specications) :::( Prospect axial direction: earth magnetic eld vertical component) :::( Test mode: relative

and absolute) :::( Range: 10000?100000nT) ) :::( Range: 10000?100000nT)

:::(Resolution: 0.1-1nT) :::( Diversion error: Z axial ?±10nT, total eld <±20nT)

:::(Accuracy: ?±0.5%) DAQ sampling rate: 10Hz Display mode: difference

value and absolute value, display data and curve Data storage capacity: 100,000 data points, U disk export data Connection port: USB Total power: 120mA~200mA Power supply: 7.2V 4000mA for 18hours standby time Working

ambient temperature: ?10 ~ +50

WIRELESS DIGITAL COMPASS INCLINOMETER,

WELL LOGGING INCLINOMETER, DRILLING

INCLINOMETER MODEL: LCX-2X

PRECISION WIRELESS GYRO INCLINOMETER,

GYROSCOPIC INCLINOMETER,

WELL SURVEY INSTRUMENT MODEL: TCX-5B

SMART THREE COMPONENT FLUX GATE MAGNETOMETER, GEOPHYSICAL INSTRUMENT MODEL: WTCL-SC7

Description: This type gyro inclinometer is kind of new digital inclinometer used to test magnetic hole well deviation, it’s widely used in engineering, hydrograph, colliery, metallurgy, petroleum, geology area.

Technical specications 1. Vertex angle test range: 0°~50°/±0.1° 2. Orientation test range: 0°~360°/±4°

3. Sealing ability: ?15Mpa

4. Well test depth: ?2500m

5. Overall size: Ø40mm×1230mm, Weight: 7Kg 6. Work temperature: -20°C ~ +85°C 7. Work voltage: DC 9V, Handle set power supply: 4pcs 5# battery 8. Test points: 9 holes and 99 groups data of each hole


INTERLOPE AFRICA



PRECISION FLUX GATE MAGNETOMETER (AUTO LEVELLING), MINERAL EXPLORATION INSTRUMENT

MODEL: WTCL-6A

Features High resolution, high accuracy, stable performance RS232 communication, easy for data transmission, easy for cooperation with software on computer. High performance transducer, high resolution and accuracy, stable performance, no temperature drift. Probe option:

1. Full solid probe (with level base); Technical specications 2. Auto-level probe (silicone oil damp)

Prospect axial direction: earth magnetic eld vertical component Test mode: relative and absolute test

Range: 10000?100000nT

Resolution: 0.1-1nT

Diversion error: ?±10nT

Accuracy: <±0.5% DAQ sampling frequency: 10Hz Data storage capacity: 100,000 points

Total power: 120mA?200mA

Power supply: 7.2V 4000mA, 18hours standby time

Work ambient temperature: ?10°C ??+50°C

Display mode: difference or absolute value, directly magnetic eld intension prole curve graph Probe size: Ф88mm × 60mm Power supply cable: 1.5m Probe weight: 0.5kg Main machine weight: 2kg

TECHNOLOGY IN THE MINING SECTOR TO INCREASE OPERATIONAL EFFICIENCY

INTERLOPE MINING SOLUTIONS IS HERE FOR YOU, BRINGING TECHNOLOGICAL SOLUTIONS AT THE DOOR STEP

MINING ROBOTS UNDERGROUND TRACKING SYSTEMSUNMANNED TRACKING SYSTEMS

Page 14


INTERLOPE AFRICA




INTERLOPE AFRICA



LOCOMOTIVES

‘UNDERGROUND

TRANSPORTATION OF ORE’

INTRODUCTION:• Mining locomotive mainly used for underground transportation

and long distance heavy transportation

Battery LocomotiveBattery locomotive is equipped with battery pack as energy

with no limited of distance. The battery pack need charging

by professional charging equipment accordingly to the

instruction.

Category: Normal type; Security type; Explosion proof type.

• l Normal type locomotive is suitable for underground

transportation with no gas, dust, explosion

problems

• l Security type locomotive is suitable for underground

transportation with good

atmospheric conditions.

• l Explosion proof type locomotive is suitable for underground

transportation which contains gas, dust.

Trolley LocomotiveWorking condition: mainly used for the

no-gas mine,level one, level two gas

mine and underground mine with fresh

wind flow.

LOCOMOTIVES

‘UNDERGROUND


Page 16


INTERLOPE AFRICA

Frame is the overall framework of the

locomotive.

Frame is used to assemble locomotive parts

and enrich the adhesion of locomotive.

Wheel-set is used for supply traction effort to

locomotive which ensure locomotive running

smoothly.

FRAME WHEEL-SETS

Gearbox issued for protect bearings. The wheel

sets is fixed on the frame though the guide slot

at two sides of gearbox which ensure wheel set

works flexible

while running.

Spring is used for release impact to the wheel

while locomotive is running which ensure

locomotive work safety and smoothly.

GEARBOX SPRING

Electric locomotive brake can be divided into mechanical

braking and electrical braking. Mechanical braking use damper

brake or detent. Electric braking is braking by traction motor

which using the controller to change the electrical circuit

with no special setting. Braking torque generated braking

device is used for slow down or stop locomotive.

Damper brake mainly use brake shoe type. Using leverage to

make wheel tread brake shoe press, with the aid of friction

to the brake shoe and wheel braking torque. The operating

methods of manual, pneumatic, hydraulic.

Gearbox

BRAKING SYSTEM

1. Hand wheel 2. Screw 3. Bush 4. Nuts 5. Balance bar 6.Pull rod 7.8. Brake bar 9.10 shoes 11. Positive and

negative buckle adjusting screw




INTERLOPE AFRICA



LOCOMOTIVES

‘UNDERGROUND


Effect of buffer connecting

device is simple and reliable

to connect the vehicle, Slow

vehicle collision impact.

Trolley locomotive with rigid

buffer, Motor vehicle

batteries using spring buffer.

BUFFER CONNECTION DEVICE SANDING DEVICE

• l Used for gas and coal dust accumulated transportation

• l Used for transportation, as well as smaller output less rules of roadway transportation system.

BATTERY LOCOMOTIVE

Sanding device for mine

locomotive

1, 3- pull rod; 2- rocker;

4- cone;

5- sand pipe; 6- spring

LOCOMOTIVES

‘UNDERGROUND


Page 18


INTERLOPE AFRICA

MAIN PRODUCT MODEL NO.CTY2.5/6,7,9G(B)

2.5T Battery Locomotive

Adhesive / total weight (t

Track gauge (mm)

Traction (KN)

Max. Traction (KN)

Speed（km/h)

Battery Voltage (V)

Battery Capacity (Ah)

Power (KW)

Dimensions Length(mm)

Width(mm)

Height(mm)

Wheelbase (mm)

Wheel diameter (mm)

Min Curve radius (m)

Controller

Braking method

2.5

600,762 or 900

2.55

6.13

4.54

48

B330

3.5*1

2360

914,1076 or 1214

1550

650

460

5

Resistance or IGBT

Mechanical Brake

MAIN PRODUCT MODEL NO.CTY5/6,7,9G(B)

5T Battery Locomotive

Adhesive / total weight (t)

Track gauge (mm)

Traction (KN)

Max. Traction (KN)

Speed（km/h)

Battery Voltage (V)


Power (KW)


Width(mm)

Height(mm)

Wheelbase (mm)

Wheel diameter (mm)


Controller

Braking method

5

600,762 or 900

7.06

12.26

7

90

385

7.5*2

2860

920,1082 or 1220

1550

850

520

6

Resistance or IGBT

Mechanical Brake




INTERLOPE AFRICA



LOCOMOTIVES

‘UNDERGROUND





Track gauge (mm)

Traction (KN)

Max. Traction (KN)

Speed（km/h)

Battery Voltage (V)

Battery Capacity

Power (KW)


Width(mm)

Height(mm)

Wheelbase (mm)

Wheel diameter (mm)


Controller

Braking method




Track gauge (mm)

Traction (KN)

Max. Traction (KN)

Speed（km/h)

Battery Voltage (V)


Power (KW)


Width(mm)

Height(mm)

Wheelbase (mm)

Wheel diameter (mm)


Controller Resistance

Braking method

6

600

7.06

12.26

7

90

385

7.5*2

2860

920,1082 or 1220

1550

850

520

6

Resistance or IGBT

Mechanical Brake

8

600,762 or 900

11.18 or 12.83

19.62

6.2 or 7.5 or 7.8

110,132,140 or 144

560

11*2

4430,4420

1054,1356

1600

1100 or 1150

680

7

Resistance or IGBT

Mechanical Brake

LOCOMOTIVES

‘UNDERGROUND


Page 20


INTERLOPE AFRICA




Track gauge (mm)

Traction (KN)

Max. Traction (KN)

Speed（km/h)

Battery Voltage (V)


Power (KW)


Width(mm)

Height(mm)

Wheelbase (mm)

Wheel diameter (mm)


Controller

Braking method

6T BATTERY LOCOMOTIVE

12

600,762 or 900

16.48

29.43

8.7

192

560

22*2

5100

1050,1212 or 1350

1600

1220

680

6

Resistance or IGBT

Mechanical Brake




INTERLOPE AFRICA



LOCOMOTIVES

‘UNDERGROUND


TROLLEY LOCOMOTIVEl Working condition: mainly used for the nogas mine, level one, level two gas mine and underground

mine with fresh wind flow.

MAIN PRODUCT MODEL NO.CJY1.5/6,7,9G(B)

1.5T Trolley Locomotive


Track gauge (mm)

Traction (KN)

Max. Traction (KN)

Speed（km/h)

Battery Voltage (V)


Power (KW)


Width(mm)

Height(mm)

Wheelbase (mm)

Wheel diameter (mm)


Controller

Braking method

1.5

600、762 or 900mm

2.55kN/3.24kN

3.68kN

4.54km/h/ 6.6km/h

100V/250V

385

3.5kW×1~6.5kW×1

2340mm/ 2370mm

950、950 or 1100mm

1550mm

650mm

Φ460mm

5m

Resistance or IGBT

Mechanical Brake

LOCOMOTIVES

‘UNDERGROUND


Page 22


INTERLOPE AFRICA

MAIN PRODUCT MODEL NO.CJY3/6,7,9G(B)

3T Trolley Locomotive


Track gauge (mm)

Traction (KN)

Max. Traction (KN)

Speed（km/h)

Battery Voltage (V)


Power (KW)


Width(mm)

Height(mm)

Wheelbase (mm)

Wheel diameter (mm)


Controller

Braking method




Track gauge (mm)

Traction (KN)

Max. Traction (KN)

Speed（km/h)

Battery Voltage (V)


Power (KW)


Width(mm)

Height(mm)

Wheelbase (mm)

Wheel diameter (mm)


Controller

Braking method

3

600、762 or 900mm

6.1kN/ 5.74kN

7.36kN

10.6km/h/ 7.5km/h

250V/ 550V

385

12kW×1~6.5kW×2

2700mm/ 2750mm

940、1082 or 1220mm

1550mm

816mm/ 850 mm

Φ650mm/ Φ520 mm

1800/ 2000mm

Resistance or IGBT

Mechanical Brake

5t

600、762 or 900mm

2.55kN/ 3.24kN

3.68kN

4.54km/h/ 6.6km/h

100V/ 250V

385

3.5kW×1~6.5kW×1

2340mm/ 2370mm

950、950 or 1100mm

1550mm

650mm

Φ460mm

5m

Resistance or IGBT

Mechanical Brake




INTERLOPE AFRICA



LOCOMOTIVES

‘UNDERGROUND





Track gauge (mm)

Traction (KN)

Max. Traction (KN)

Speed（km/h)

Battery Voltage (V)


Power (KW)


Width(mm)

Height(mm)

Wheelbase (mm)

Wheel diameter (mm)


Controller

Braking method


7t

600、762 or 900mm

2.55kN/ 3.24kN

3.68kN

20

100V/ 250V

385

3.5kW×1~6.5kW×1

2340mm/ 2370mm

950、950 or 1100mm

1550mm

1100mm

Φ460mm

7m

Resistance or IGBT

Mechanical Brake

Subway Project Case

LOCOMOTIVES

‘UNDERGROUND


Page 24


INTERLOPE AFRICA

THE CHARACTERISTICS OF AC FREQUENCY CONVERSION ELECTRIC LOCOMOTIVE:

l Frame control mothod:

The electric locomotive adopts the frame control and AC dragging. Good performance of balanced

traction motor power is suitable for sharp slope overload operation.

l Good adhesion utilization and start traction:

Adhesion condition is the key factor in engine performance. The locomotive adhesion coefficient is 0.285,

the measured adhesion coefficient is above 0.32, which makes it has big starting tractive effort. The

electric locomotive can pull train which weighs 250 tons at 8 ~ 9 km/h speed run uphill on the slope of 35

‰. The locomotive is particularly for tunnel boring machine(TBM) construction of traction transportation.

l Others：Button switch use Schneider Electric products;

Warning light and ordinary light use LED DC 24v combination lamps and lanterns;

Can install video motor system according to client’s requirement, monitor screen in driver cab,

infrared cameras on the rolling stock car, which can monitor the rear of locomotive and the entire

locomotive space;

Traction battery brand is ZIBO or ZHENGJIANG;

Battery charger is Xi 'an Kaiyuan’s.

l Good braking performance

Because of large load capacity and sharp slope (up to 35 ‰), especially locomotive traction is

overloaded downward, the braking performance must be good. We design electric braking, compressed

air braking, spring parking braking and emergency braking security measures according to the aboved

requirements.

Electrical braking: Used as a conventional brake, with functions of regenerative braking energy,

locomotive kinetic energy turns into electrical energy by converter to the battery. Compressed air braking:

In order to make the locomotive traction transport safety and reliable, electric locomotive is also

equipped with air braking system. Air braking system adopts dual circuit air brake system to get automatic

braking force distribution function, exhaust brake control to control the locomotive operating condition.

The locomotive brake using tread brake, shoe brake on both sides. Muck car and segment car use

unilateral shoe brake. Spring parking braking: When electric locomotive is powered off to park as usual or

on the ramp, spring parking brake is to be used to prevent the slipping; When air system pipe leaking, air

pressure drops to the set value, electric locomotive brakes run automatically to ensure safety




INTERLOPE AFRICA



THE CHARACTERISTICS OF AC FREQUENCY CONVERSION ELECTRIC LOCOMOTIVE:

OFF ROAD TRUCK TYERS


INTERLOPE AFRICA



GET THE CUSTOM BUILT, SPECIALIZED ROBOT YOU REQUIRE. DO YOU NEED A CUSTOMIZED ROBOT? DON'T LET THE WORD "CUSTOM" SCARE YOU. THE WORD "CUSTOM" TO US SIMPLY MEANS THAT WE WILL PROVIDE YOU WITH A SOLUTION THAT PERFECTLY SUITS YOUR NEEDS AND FITS WITHIN YOUR BUDGET.

ROBOTS AND UNMANNED AUTOMATED TRUCKING SYSTEMS INCREASES OPERATIONAL EFFICIENCY AND PRODUCTIVITY

TRANSFORM YOUR EARTH MOVING OPERATIONS WITH COMMAND AND CONTROL SOFTWARE. ALLOW ONE OPERATOR TO CONTROL MULTIPLE R O B O T I C E A R T H M O V I N G E Q U I P M E N T . VEHICLE AUTOMATION TECHNOLOGY CAN OPERATE IN UNSTABLE OR OTHERWISE UNSAFE AREAS WHILE AT THE SAME TIME IMPROVING EFFICIENCY AND PRODUCTIVITY.

INTERLOPE MINING SOLUT IONS BR INGS AUTOMATED HAULING SYSTEM SOLUTION. EACH AUTONOMOUS DUMP TRUCK IS EQUIPPED WITH VEHICLE CONTROLLERS, A HIGH PRECISION GPS SYSTEM, AN OBSTACLE DETECTION SYSTEM AND A WIRELESS NETWORK SYSTEM. THESE FEATURES ALLOW THE DUMP TRUCK TO SAFELY OPERATE THOUGH A COMPLEX LOAD, HAUL AND DUMP CYCLE AND TO INTEGRATE WITH THE DOZERS, LOADERS AND SHOVELS THAT ARE ALSO PART OF THE AUTONOMOUS SYSTEM.THE AUTONOMOUS HAULAGE SYSTEM (AHS) ALLOWS UNMANNED OPERATION OF ULTRA-CLASS MINING TRUCKS.

AN UNDERGROUND ROCK BREAKER CAN NOW BE REMOTELY USED

REMOTE ROBOTIC MINING SYSTEM WITH COLLISION AVOIDANCE

When you think of mining, you think of breaking rocks. You think big rocks, you think danger. In the interest of safety and through-put, Mining engineers have come up with an Underground Rock Breaker - a system which remotely controls these huge hydraulic rock-breaker machines that weigh-in at ten tonnes. This system will allow operators to prevent accidents and collisions involving massive rock-breaking equipment at mines that might be thousands of kilometres away.It can sort you out from copper, iron, gold and other mining environment

RELATED VEHICLES

AHS (Automated Hauling System) to deliver these key benets for you Reduced number of drivers working in hostile and remote condition

• Increased safety on mine sites• Reduced operating costs – extended tyre life• Increased productivity and efciency

• The environmental benets of the AHS systems are reduced fuel consumption and emissions.

ADT EXCAVATOR DOZER

MINING ROBOTS UNMANNED AUTOMATED TRUCKING SYSTEMS


INTERLOPE AFRICA



REDUCE MAINTENANCE COST

By cloning thePractices of your veryBest drivers, haul truckComponentsExperience less wearAnd tear.

ROBOT DROPPED IN THEMINE SHAFT

AUTOMATED HAUL TRUCK CAN SUBSTANTIALLYPRODUCTION COSTS

ENHANCED SAFETY

METRICS

COAL RESCUE ROBOT

This robot was built to be sent down a mine shaft. This was a low cost platform that could be abandoned at the bottom of the mine when the inspection was completed. It was outtted with a pan and tilt camera, lights and a ber

This is a robot that was built for a mining company to drive into abandoned mineshafts to search for potash leftover from years ago. This Robot built the platform to carry camera equipment and an array of other sensors to get feedback from underground.

In a mining accident rst responders are workingagainst the clock and against a myriad of dangers to assess the s i tuat ion and rescue trapped miners. The mine has unknown and potent ia l ly deadly conditions creating a challenge for rst responders and often limits their ability to assess the situation in a timely matter. There is a need for a robotic system that could be used to support a mine rescue team, functioning primarily as a “scout”, allowing for the exploration and assessment of the mine conditions.

INCREASED OPERATIONAL EFFICIENCYThrough more Consistent and precise Haul truck operation, Cycle time is reduced. The crusher is never Kept waiting, and Product is produced in less time.

REDUCED EXPOSURE TO LABOUR SCARCITYAutomated haul trucks ensure that your operations are protected when access to labor iscompromised.

Through more Consistent operations, and a signicant reduction in driver hours, incidents due to fatigue or errors are greatly reduced.

DECREASE YOUR OPERATING COSTS BY 15¢ PERTON OR MORE

ROBOTS

COAL RESCUE ROBOT


INTERLOPE AFRICA



WIFI UNDERGROUND TRACKING SYSTEM

FORE MORE INFO ON TECHNOLOGY CONTACT US A COMPLETE TECHNOLOGY

BROCHURE WILL BE SENT TO YOU

• Useful to track specic assets and individuals.• You can detect when they are in motion and when they are still• Create specic alerts when: - A tag is moved - The panic button is pressed - The tag falls (fall-detection) - The battery level is low

• Many parameters can be set, such as the scan rate, motion detection, low battery level, panic button behavior.• Battery duration is about 25 days, rechargeable.• Tags are small and light.

PURPOSE

TO

TRACK SPECIFIC ASSETS, PEOPLE & INDIVIDUALS

Using technology-assisted guidance, drivers consistently spot themselves without shovel assistance. The shovel is never kept waiting, and its productivity is increased.

IMPROVE SPOTTING SAFETY

By continuous monitoring of truck and shovel locations, risk of collision is greatly reduced or even eliminated

INCREASE SITE REVENUE

By improving the productivity of the shovel, more ore is produced in the same amount of time.

Technology assisted spotting increases overall revenue as well

as gross margins.

Assisted Spotting Solutions may be installed on existing equipment and can be integrated with installed eet management system if desired

ASSISTED SPOTTINGSOLUTIONS


INTERLOPE AFRICA



REQUIREMENTS

1. A sufcient number of Wi-Fi access points, whether owned by you or by others, broadcasting a signal in the area. Typically, the system would work well if three or more Wi-Fi access points are “visible” at any given time. The number of access points depends on the dimension of the area and on the accuracy required

• Any kind of Wi-Fi access point can work• They do not need to provide connection• They must broadcast a detectable SSID• You can also provide internet connection using the access points.

2. A oor-plan of the facility, of each oor you plan to monitor. You will have to upload the oor-plan (PGN, GIF, JPG formats supported) i n s id e ou r da sh b oa rd , an d properly scaled.

WHAT YOU NEED TO DO

1.-An initial “site survey”, to collect the ambient radio signals. This step must be done using our mobile app (ngerprinting).

2. To use our smart Wi-Fi tags:

- Provide a Smart Tag to each person to track

-Attach a Smart tag to each asset to track

The Smart Tags must be able to connect to the internet through a specic Wi-Fi network in order to communicate to the server.

FEATURES: SMART WIFI TAGS

• Useful to track specic assets and individuals.• You can detect when they are in motion and when they are still• Create specic alerts when:

- A tag is moved- The panic button is pressed the tag falls (fall-detection)- The battery level is low

• Many parameters can be set, such as the scan rate, motion detection, low battery level, panic button behavior.

• Battery duration is about 25 days, rechargeable.• Tags are small and light.

WIFI UNDERGROUND


INTERLOPE AFRICA



Using Our Smart Wi Tags And Our Dashboard

• Track all the individuals carrying a tag, and all the assets with a tag attached, in real time, on different levels.• Manage users, nodes, devices, oor-plans, levels.• See when a tag is still or in motion.• Register specic tag and assign a name and a description to them.• Track only specic devices, and exclude the others.• See the last time a tag or a device has been detected.• Manage the general settings of your site.

LIMITATIONS

There are some limitations to keep in mind

• Only people/assets with a Smart Tag can be tracked.• If the network conguration of the network changes, if a signicant amount of access points are added, moved or removed, it might be needed to re-train the site to keep the ngerprinting database up to date.• The max scan rate is 3 seconds, due to the time it takes to scan W-Fi channels and connect to the server.• Smart Tags must always connect to the same network (SSID) throughout the area to monitor. Please be sure that the same network is available in all the areas to monitor.•Smart Tags operate in accordance to the IEEE 802.11 b/g protocol, therefore the network must comply with this standard in order to allow them to connect.

YOU CAN DEVELOP YOUR OWN DASHBOARD ON TOP OF OUR API

Create Heat Maps.

• Perform historical analysis:

- Analyze dwell time, returning rate, bounce rate, number of devices on site

- Make diagrams showing devices’ paths and movements

• You can gather devices in different groups, and lter them.

• Track devices individually.

• Analyze data coming from different hours/days of the week/ month. AND Measure the effectiveness of the layout of your environment.

• Create specic geo-fences and divide the environment in sub-zones, like aisles of a supermarket, rooms of a building, shops of a shopping mall, or sections of a museum. You can set, for example: Restricted areas , Promotional areas And Temporary exhibitions’ room

PRICING

Interlope Africa and IT Partners: on cloud serversThe pricing is based on a monthly fee, which depends either on the number of devices to be tracked, or on the dimension of the area to monitor.There is an annual contract, for long-term installations, and a month-to-month contract for short installations and one-time events.

Enterprise Standalone InstallationWe can a l so p rov ide a s tandalone installation, which is based on a local instance running on an on-premise server.

WIFI UNDERGROUND


INTERLOPE AFRICA



INTRODUCTION

Page 32


INTERLOPE AFRICA

TECHNOLOGY FOR THINGS

Interlope Mining Solutions trading as Interlope Africa is a mining solutions and supply company based in

Randfontein.

The company is 100% black owned entity and 50% female owned.

We have two directors who are:

Ms Mpho Thantsha:

Mr Thomas Mthoba:

The company has 5 sub-divisions which are: Belts and Conveyor, Electrical, Exploration,

Piping, and Mining Technology

Interlope Mining Solutions was formed to become the leading provider in mining solutions on the

continent.

Interlope Africa will Tailor make Cumulocity for your business

Cumulocity (Internet for Things) gives you fast visibility and control over your remote assets, be it machines

or any other assets that you need to control

Cumulocity provides:

Certified hardware kits and software libraries that allows you to bring remote assets into the cloud It runs on

all networks, mobile or fixed, no need to open your firewalls, no need to purchase additional VPN services

and reduces your mobile traffic using SmarREST by 80% over other HTTP APIS. In a nutshell just connect and

Go.

Proximity detection system for the mining industry

It works by establishing a magnetic marker field, or zone, around machinery using a device called the

generator (or proximity module depending on the mining type). One or more of these may be fitted onto

machinery to create fields designated as the 'warning zone' and 'alert zone'. This marker field can

encompass the entire machine and its turning radius, or be specific to certain areas.

Miners wear a personal-alarm device (PAD) that detects and measures the magnetic marker field to

determine their proximity to the machine, and alert them of possible danger to their safety. The PAD

attaches to the miners belt and has an optional clip-on 'warning module' that attaches to the hard hat

(country specific).

LETS TALK PDS

PROXIMITY DETECTION SYSTEM




INTERLOPE AFRICA

As the miner enters the warning zone around the machinery, visual and audible alarms alert both the

miner and the machine operator. If the miner enters the alert-zone, HazardAvert can be programmed to

disable the machine completely.

HazardAvert can be used in surface and underground, coal and hard-rock applications. The core

technology of the system is consistent across all types of mining, but each system is specifically tailored

according to the mining type and application.

The HazardAvert system incorporates numerous key design features to ensure high reliability and

effectiveness, such as:

• H azardAvert, which can be installed on any and all types of mobile mining machinery and vehicles

• HazardAvert, which uses low-frequency signals that are not affected by the environment

or other objects

• Single, miner-worn PADs that work with all equipped machinery throughout the mine

• Enabling multiple machines and multiple miners to work closely without system conflict

• Allowing low-frequency signals to pass through almost anything, including coal, rock, dust and water

• Ability to be used in hard rock, coal and open cut applications

• Highly accurate and repeatable zones

• Zones may be shaped to suit equipment

A range of data recording and reporting tools include:

• Recording of all events such as miners entering and exiting zones

• Tracking of all miners in the vicinity, even if no alarms are triggered

• Enabling data to be downloaded to hand-held Bluetooth® device or streamed over wireless networks

• Safety data being retrieved for training purposes

HazardAlarm is a simplified, alarm-only proximity detection system that uses a single generator to create

an electromagnetic field around machinery that warns machine operators and individuals of a potential

for collision.

It is ideal for use on haulage type machinery that moves at higher rates of speed. Since it only uses a single

generator, it is a cost-effective, easy to install proximity detection solution.

If an individual is in the collision path of a piece of machinery, HazardAlarm will alert both the machine

operator and the individual. If the individual is in close proximity, but is not in danger of being struck, the

system will not alarm.

VISIBLE AND AUDIBLE ALARMS FOR MINER AND MACHINE OPERATOR

HazardAlarm™

PROXIMITY DETECTION SYSTEM



PIPING SYSTEMSDIVISION

Page 34


INTERLOPE AFRICA

INTERLOPE MINING SOLUTIONS PIPING AND LOGISTICS DIVISION

INTERLOPE IS TAKING AFRICA

Price(USD) Price(USD) Price(USD) CIF Durban,South AfricaPump

type Pump

head attachment Motor

4/3C-AH 941

234

4

pole

5.5KW 241 1916

4pole

7.5kw 273 1949

6

pole5.5KW 284 1960

6pole

7.5KW 400 2076

4pole

11KW 400 2076

4pole

15KW 466 2142

4pole

18.5KW 591 2266

4pole22Kw 634 2310

4pole

30KW 831 2507

2pole

22Kw 613 2288

2pole

30Kw 809 2485

6pole

3KW 241 1916

6pole

4KW 263 1938

6pole

5.5KW 284 1960

4/3D-AH 1060 234

4

pole

5.5KW 241 2035

4pole

7.5kw 273 2068

4pole

11KW 400 2195

4pole 15KW 466 2261

4pole 18.5KW 591 2385

4pole22Kw 634 2429

4pole 30KW 831 2626

2pole 22Kw 613 2407

2pole 30Kw 809 2604

2pole 37Kw 897 2691

4pole37KW 1017 2812

4pole45KW 1127 2921

4pole55KW 1400 3195

2pole 45KW 1192 2987

2pole 55KW 1477 3271




INTERLOPE AFRICA

6/4D-AH 1868

391

4

pole

55KW 1400 5268

4pole

15KW 466 4334

4pole

18.5KW 591 4459

4pole22Kw 634 4502

4pole

30KW 831 4699

6

pole15KW 634 4502

6pole18.5 777 4644

6pole22Kw 853 4721

4 pole15KW 466 4334

4pole18.5 591 4459

6pole30KW 1127 4994

6pole37KW 1389 5257

4pole37KW 1017 4885

4pole45KW 1127 4994

6/4E-AH 1995 391

4 pole 55KW 1400 4286

4pole22Kw 634 3520

4pole 30KW 831 3717

4pole37KW 1017 3903

4pole45KW 1127 4012

4pole75KW 1824 4709

4pole90KW 2067 4953

4pole110KW 3325 6211

8/6E-AH 3921 547

4 pole 55KW 1400 6368

4pole75KW 1824 6792

4pole90KW 2067 7035

4pole110KW 3325 8293

8pole11KW 623 5591

8pole18.5KW 1006 5974

8pole22KW 1118 6085

8pole30KW 1389 6357

6pole30KW 1127 6094

8pole45KW 2002 6969

6pole30KW 1127 6094

6pole37KW 1389 6357

6pole45KW 1772 6739

6pole55KW 2013 6980

6pole75KW 3522 8489

8pole55KW 3216 8183

8pole75KW 3741 8708

6pole90KW 3741 8708

6pole110KW 4331 9299

8/6R-AH 4268 547

6pole132KW 4791 10105

6pole110KW 4331 9646

6pole185KW 6694 12008

4pole160KW 4331 9646

4pole132KW 4178 9493

4pole160KW 4331 9646





Page 36


INTERLOPE AFRICA

Application: Coal washerprocessing, handling with the ne ore and tailings in metal m ine , hand ing combin ed bottom and y ash in a thermal power station.

We sell quality, with the best prices in the market

• Our products are manufactured by experts, who have been in the industry for years

• Our products are of high quality currently used in various countries which includes Africa, USA, UK, UAE, Germany and India

• Our products meet all global certication standards

• WE don't have buyers! We have partners

: We don't just sell, we work with you.

10/8R – CM SLURRY PUMP

Application:

C o a l w a s h e r p r o c e s s i n g , handling with the ne ore and tailings in metal mine, handingcombined bottom and y ash in a thermal power station.

10/8E-CM SLURRY PUMP

PUMP SPARES



PUMPS

The Delta Force (R) series pumps are vertical, centrifugal slurry pumps submerged in sump during operation. They are designed for delivering highly abrasive, large particles and high density slurries. These pumps have no need of any shaft seal and sealing water.

The pump casing of type Delta Force pumps are made of wear-resistant metal. The wear parts are made of high chromium for the Delta Force series and are rubber lined for the Delta Force R series.

40 PV SUMP

Type Delta Force CHH slurry pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for the handling of highly abrasive, high density slurries in the metallurgical, mining, coal, power generation, construction material and other industry.

The pumps of this type may also be installed in multistage series.

Page 37


INTERLOPE AFRICA



PUMPS

This pump is made of a single casing and it has a wide wet passage. The wet parts are made of abrasion resistant chromium alloy. The discharge branch pump can be oriented in any direction upon request. This type of pump is abrasion-resistant, easy to install, and has good NPSH performance. Gravel pumps are designed for the continuous handling of more abrasive slurries which contain solids that are too big to be pump by other types of pumps. They are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging in dredger and course of rivers, and other elds. The DTF-GH series pump is high heat pump.

6/4D-DTF G Gravel Pump

Table

The DTF L(R) series slurry pumps are cantilevered, horizontal, centrifugal, slurry pumps. They are suitable for delivering less abr as ive , lo w de nse s lu r r y in the m e t a l l u r g i c a l , m i n i n g , c o a l a n d construction material industry. The shaft seal is adopted both gland seal and centrifugal seal.

50B-DTF L SLURY PUMP

150 E-DTF L SLURRY

PUMP

300S-DTF L-SLURRY

PUMP

400S DTF L-SLURRY

PUMP

Page 38


INTERLOPE AFRICA



Submersible Pump

Electrical Submersible Pump

IntegrateElectromagneticFlow meter

HDPE PIPES AND PIPES FITTING

Interlope offers a comprehensive range of HDPE pipe and tting systems specically designed for buried installations in gas distribution applications.

Our HDPE Pipes are available in coil lengths and are specied due to its exible properties as well as its light weight and ease of installation

Hydraulic Driven Top Discharge Heavy Duty Slurry Pumps. It is the hydraulic version of the Series Heavy Duty Submersible Slurry Pump with agitator. Ideal for applications where e lect r ic power i s not available or variable speed is needed for the application. It is the choice of industries that face the most difcult pumping.

LCD display , gallons: : Outputsignal : 4-20m A :: Electrode : 316L SS:: Power supply : 24 VDC:: Protection : IP 68:: Workingpressure 1.6MPa:: Temperature :120C:: Lining Material : PTFE

Page 39


INTERLOPE AFRICA



PINCH VALVES

• SIZE 15MM TO 400MM –• PRESSURE UPTO 25 BAR – IN CLOSED & OPEN POSITION• CYLINDER OPERATED PINCH VALVES• Option – I 2 P CONVERTOR ALONG WITH POSITIONER- 4 TO 20 MA• MANUAL OVER RIDE APPLICATIONS

Chemicals, Alkaline Mixtures Acids, Slurries & intermediates, Liquid Foods, Viscous uids,Sludge’s, GranulesDry SuspensionPowder CollectorsGases

PNEUMATIC CYLINDER OPERATED PINCH VALVES

• SIZE 15MM TO 400MM –• DRILLED TO ANY STANDARD – DIN, ANSI, BS, IS, OR AS REQUIRED.• PRESSURE UPTO 25 BAR – IN CLOSED & OPEN POSITION –• SLEEVE OPTIONS – NEOPRENE, NATURAL, HYPALONE, EPDM, VITON,• HIGH ABRASSION RESISTANT – SPECIAL INVENTED – HIGHLY ELASTIC, SPECIAL EXTRA HIGH PRESSURE MOULDED (FIVE TIMES BETTER ABRASSION RESISTANT & LONG LIFE THAN ANY RUBBER SLEEVE)

MANUAL OPERATED PINCH VALVES

HDPE PIPES AND PIPES FITTING

Page 40


INTERLOPE AFRICA



ELECTRIC VALVE ACTUATOR

Page 41


INTERLOPE AFRICA



GATE VALVES

BALL VALVES

API Gate Valve

• Class 150 API Gate Valve • Class 300 API Gate Valve • Class 600 API Gate Valve • Class 900~1500 API Gate Valve • Class 600~900 API Gate Valve • Class 1500~2500 API Gate Valve • Class 2500 Gate Valve • Class 900 Gate Valve

Hard sealing ball valve

Size: 2'-32' Pressure: 150LB-2500LB Body: f o r g i n g / c a s t i n g C o n n e c t i o n : a n g e d / w e l d e d Floating ball, full/reduced bore Anti-Static device Anti-yout structure of valve stem Fireproof structure *well appl icable to high temperature working condition Top ange platform in line with ISO5211

Our Gate valves products include Gate valve, American Standard Gate Valve, API JIS Gate Valve, Api Gate Valve, Class 2500 Gate Valve, Class 900 Gate Valve, Forged Steel Gate Valve, Gate Valve Class 150, Parallel Slab Gate Valve Class 150, Stainless and Forged Steel Gate Valve, Parallel Slab Gate Valve Class 600, Wedge Type Flange Gate Valve. If you are interested in any of Gate valves products or have a customized requirement to ll, please contact us right now !

Gate Valve Size: 2'-48' Pressure: 150LB-2500LB Design and manufacture conform to API 600,API 6D & ASME 16.34 Test and check conform to API 598, API 6D Remarks conform to MSS-SP-25 Adopt the following structure Full bore Flexible or rigid disc or soft seal structure Self-centering gland Bolted bonnet, spiral would eight-square gasket sealing bonnet or pressure seal bonnet. According to the following standard Flange ends conform to ASME B16.5 & ASME B 16.47A Butt-welding ends conform to ASME B 16.25. Face to face dimension conform to ASME B 16.10,API 600,API 6D Operation type: hand wheel, worm gear, bevel gear, electrical, pneumatic and hydraulic etc

CUSTOMISE YOUR GATE VALVE WITH US

Orbit ball valve Size: 2'-32' Pressure: 150LB-2500LB Body: forged/casted m a t e r i a l C o n n e c t i o n : anged/welded Sealing: soft/hard Full/reduced bore Anti-Static device Fireproof structure *Hard sealing orbit valve is the best choice under harsh working conditions, such as high tempreture&pressure,or medium solid particulate mater Top ange platform in line with ISO5211

Page 42


INTERLOPE AFRICA



Interlope Mining Solutions Pty Ltd • 55 Park street • Randfontein • Johannesburg • South AfricaTel: 011 692 4528 • Email: [email protected] • Web: www.interlopeafrica.co.za

GATE VALVES

Floating Ball Valve Size: 1/4'-10' Pressure: 150LB-2500LB Connection: anged/welded Body: forging/casting material Structure: two-pieces/three pieces Connection:anged/welded Full/reduced bore Anti-Static device Anti-yout structure of valve stem Fireproof struture Anti-leakage packing design Top ange platform in line with ISO5211

• Class 150 Full Bore Folating Ball Valve • Class 300 Full Bore Folating Ball Valve • Class 400~600 Full Bore Folating Ball Valve • Class 150 Reduced Bore Folating Ball Valve • Class 300 Reduced Bore Folating Ball Valve • Class 400~600 Reduced Bore Folating Ball Valve

Trunnion Mounted Ball Valve Size: 2'-48' Pressure: 150LB-2500LB Body: forging/casting material Connection: anged/welded Ball: Trunnion Bore: full/reduced Anti-yout structure of valve stem Self-relieving structure Two-blocking Fireproof struture Greasing system installed stem and seat(Diameter>6'') Vent valve on body(Diameter>6'') Support plate structure for forged valve(Diameter>8) Top ange platform in line with ISO5211

API Ball Valve API Trunnion Mounted Ball Valves

Trunnion Ball Valve

• Class 150 Full Bore Trunnion Mounted Ball Valve • Class 300 Full Bore Trunnion Mounted Ball Valve • Class 400 Full Bore Trunnion Mounted Ball Valve • Class 600 Full Bore Trunnion Mounted Ball Valve • Class 900 Full Bore Trunnion Mounted Ball Valve • Class 1500 Full Bore Trunnion Mounted Ball Valve • Class 150 Reduced Bore Trunnion Mounted Ball Valve • Class 400 Reduced Bore Trunnion Mounted Ball Valve • Class 900 Reduced Bore Trunnion Mounted Ball Valve

Pig valve Size: 4'-24' Pressure: 150LB-2500LB Body: forged/casted material Connection: anged/welded Sealing:soft/hard Side-entry/top-entry Anti-Static device Electronic sensors device

Top Entry Ball ValveSize: 2'-40' Pressure: 150LB-2500LB Body: forging/casting Connection: anged/welded Trunion ball, full/reduced bore Anti-Static device Anti-yout structure of valve stem Fireproof struture Greasing system installed on stem and seat(Diameter>6'') Top ange platform in line with ISO5211

• Class 150 Top Entry Ball Valve • Class 300 Top Entry Ball Valve • Class 600 Top Entry Ball Valve • Class 900 Top Entry Ball Valve • Class 1500 Top Entry Ball

1-PC Thread Ball Valve with Mounting Pad 2000PSI 2-PC Flanged Ball Valve 3-PC Thread Ball Valve with Mounting Pad

Page 43


INTERLOPE AFRICA

BUTTER FLY VALVES

Bi-directional Hard Sealing Buttery Valve Size:DN50-DN2000

Pressure: PN2.5,PN6,PN10,PN16,PN25,PN40,P64,PN100 Body: Casting Material Disc: Casting Material Connection: Flanged, Welded, Wafer, Lug Wafer Metallic sealing ring installed on the disc Bi-directional hard sealing, Zero leakage.

BUTTER FLY VALVES

Size:DN50-DN4000 Pressure: PN2.5,PN6,PN10,PN16,PN25,PN40,P64,PN100,PN150 Body: Casting Material Disc: Casting Material Connection: Flanged, Welded, Wafer, Lug Wafer Metallic sealing ring installed on the disc Unidirection hard sealing, Zero leakage

• Triple Offset Buttery Valve • High Pressure Buttery Valves • Class 150 Triple Offset Wafe Buttery Valve • Class 300-600 Triple Offset Wafe Buttery Valve • Class 150 Triple Offset Flange Buttery Valve • Class 300-600 Triple Offset Flange Buttery Valve• Class 150LB Triple Offset Butt-welded Buttery Valve• Class 300 Triple Offset Butt-welded Buttery Valve

Double eccentric buttery valve

Size: DN50-DN4000 Pressure: PN2.5,PN6,PN10,PN16,PN25,PN40 Body: casting material Disc: Casting Material Connection: Flanged, Welded, Wafer,Lug Wafer Soft sealing-Non-metallic sealing ring installed on the disc

Center line buttery valve

Size: DN50-DN1200 Pressure: PN6,PN10,PN16, Body: Casting material Disc: Casting Material Connection: Flanged, Wafer, Lug Wafer

GET

Electric Buttery Valve Pneumat ic Hard Sea l Buttery Valve Work Wheel Flexible Hard Seal Buttery Valve Ventilating Buttery Valve

Page 44


INTERLOPE AFRICA




Interlope Mining Solutions Pty Ltd 19 Crn Kruger and Human street • Office 103

Old Absa Building • Krugersdorp

Tel: 011 692 4528 / 011 660 7422Fax is 086 218 7699

Email: [email protected]: www.interlopeafrica.co.za

Interlope africa company profile

Marketing

Transcript of Interlope africa company profile