Interlock® Standing Seam Spec Manual

8
Interlock ® Standing Seam Specification Manual Lifetime Roofing Systems®

description

Classic weather-tight panel roofing system.

Transcript of Interlock® Standing Seam Spec Manual

Interlock® Standing SeamSpecification Manual

L i f e t i m e R o o f i n g S y s t e m s ®

1 DESCRIPTION

Interlock® Standing Seam aluminum roofing is a fully interlocking system. Unlike other metal panel roofs, no rivets or screws are exposed on the surface of the panels.

It may be installed on new construction, or applied over existing roofs. All trims and caps are designed to ensure an integrated weather-proof roof.

Interlock® Standing Seam has many advantages when compared to other roofing products.

Longevity: Interlock has a lifetime warranty.

Energy Efficient: Energy Star® Rated. (U.S. Only)

Note: It is the responsibility of architects, builders and roof installers to ensure that all construction bylaws and building codes are adhered to.

L i f e t i m e R o o f i n g S y s t e m s ®

Nailing Slot for Aluminum Nails

Interlocking Panel.028” (.70mm) Gauge Aluminum

Special Roofing Underlayment

Roof Surface, 1/2” (1.3cm) Plywood

2 DESCRIPTION

Interlock Standing Seam is composed of panels, which can be manufactured to any pre determined length. The panels are coated with Alunar®, embedded with Dupont™ Teflon® to provide an extremely durable and attractive surface.

The panels are roll formed with a ribbed contour to give added strength. A uniquely designed ridge on each panel provides a secure system of interlocking the panels together.

Weight: Interlock Standing Seam weights considerably less than most other types of roofing systems. No special preparation is needed, resulting in less structural cost.

Application: Aluminum nails of varying lengths with a shank diameter of 0.155” and a head diameter of 1/2” are used to attach panels and accessories.

Sheathing: For new construction, sheathing should not be less than 1/2”.

Underlayment: They are then covered with a special roofing underlayment. Interlock’s panels are then installed and nailed through to sheathing.

Starter Strip1st Row Underlayment

2nd row Underlayment3rd Row Underlayment

Plywood Roof

L i f e t i m e R o o f i n g S y s t e m s ®

Roof Panel

Manufactured to length, in continuous form. Runs are vertical. Panels lock into each other on one edge and are nailed to the roof on the other edge.

PROFILE FORSTARTER STRIP

Starter strip has been technically designed to provide a starting point where panels are locked and secured.

The manufacturing characteristics of the Starter Strip provides a water barrier which prevents water back-up.

3 COMPONENTS

Starter Strip

Interlock Panel

11.75” (29.845CM)15” (38.1 CM)

18.75” (47.625 CM)

L i f e t i m e R o o f i n g S y s t e m s ®

TWO STANDING SEAM PANELSINTERLOCKING1 1/8"

1 1/4"

1"

3/8"

1/2"

3/8"

RIDGES TO PREVENT WATER BACK-UP

PROTRUDINGDRIP CAP

SPECIAL SCREW WITHNEOPRENE WASHER

3 COMPONENTS

4 COMPONENTS

An inner gable is installed and a gable end trim is then applied over top to form a protec-tive cap, and secured by special screws with neoprene washers.

Provides a weather-tight seal around chimneys. Roof panels are secured around the chimney and a collar is cut into the brick and morter, covering the roof panels.

GABLE END TRIM

L i f e t i m e R o o f i n g S y s t e m s ®

2” (5.08CM)

2 7/8” (7.3025CM)

END WALLCHIMNEY

COLLAR

BACK PAN

INNER GABLE

SIDE WALL

Gable End Trim

Chimney/Skylight Collar

5 COMPONENTS

Provides smooth, obstruction-free path for precipitation. Roof panels are trimmed and folded inside the locking joint to form a solid weather-proof unit. This specially designed trim is manufactured in 10’ lengths.

WEATHER-SEALEDLOCKING JOINTS

RAFTERS SHEATHING1/2” (1.27cm) ply (min.)

After roof panels have been , special 1-1/2” self-tapping wood screws with neoprene washers are used to secure the ridge cap to the roof. This ensures that no nails or screws are exposed to rain or to the weather.

L i f e t i m e R o o f i n g S y s t e m s ®

4”30

degrees

5”

ROOF LINE

(7.8125”)

(0.75”)(0.5”)

1”

Valley Trim

Two Piece Ridge Cap

6 APPLICATION

END-WALL FLASHING

ROOF PANELS STARTER STRIP

UNDERLAYMENT

GABLE TRIM

TWO PIECE RIDGE CAP

VALLEY TRIM

UNDERLAYMENT

SHEATHING: 1/2”

TESTING REPORTSICC Evaluation Report 1790CCMC Evaluation Report 10475-RFlorida Report FL 7263-R4Texas Department of Insurance - Hail Impact UL2218 Class IV

The Best roof for Planet Earth. The Last roof you will ever need.

L i f e t i m e R o o f i n g S y s t e m s ®

Interlock Roofing Ltd.9969 River Way, Delta, BC V4G 1M8 1-866-766-3388 www.InterlockRoofing.com

Color GuideInterlock Roofing Ltd. offers a highly durable aluminum roofing product available in a range of different colors, opening up an extensive palette for homeowners and designers.

Interlock® roofs are exclusively protected for a lifetime by the Alunar® Coating System embedded with TEFLON® surface protector.

© 2015 The Interlock Group. Interlock®, Interlock Lifetime Roofing Systems®, Alunar® are registered trademarks of I.E.L. Manufacturing Ltd. and are used under license.TEFLON® is a registered Trademark of E.I. du Pont de Nemours and Company used under license.

When installed properly, this product will help reduce energy costs. Actual savings will vary based on geographic location and individual building characteristics. CS20150324

L i f e t i m e R o o f i n g S y s t e m s ®

Aged Copper Weathered Solid Copper

Musket Grey

Black

Deep Charcoal Grey Colonial Brown Tudor Brown

EMBEDDEDWITH

The Interlock® Roof featuring the Alunar® Coating embedded with TEFLON® surface protector provides homeowners the ultimate in durability and protection from stains, moisture and organic debris.Actual product color may differ to that represented on manual. Product design and installation technique may vary from represented shown on manual. Installation methods may vary by structure, region, climate, and local building codes. Certain variables and factors specific to your home may inhibit the product’s ability to shed snow. Roofing products and components may change without notice. Please see our website for more information. Roofing products are NOT included in Canada's ENERGY STAR program.

Interlock Roofing Ltd.9969 River Way, Delta, BC V4G 1M8 1-866-766-3388 www.InterlockRoofing.com

© 2015 The Interlock Group. Interlock®, Interlock Lifetime Roofing Systems®, Alunar® are registered trademarks of I.E.L. Manufacturing Ltd. and are used under license.

The ENERGY STAR name and the ENERGY STAR symbol are registered trademarks of the United States Environmental Protection Agency and are used with permission. When installed properly, this product will help reduce energy costs. Actual savings will vary based on geographic location and individual building characteristics. Consult your product manufacturer, roofing contractor, or call 1-888-STAR-YES

(1-888-782-7937) for more information.

TEFLON® is a registered Trademark of E.I. du Pont de Nemours and Company used under license. When installed properly, this product will help reduce energy costs. Actual savings will vary based on geographic location and individual building characteristics. LC20150601

L i f e t i m e R o o f i n g S y s t e m s ®

Tile RedHunter Green(U.S. Only)

NAT-127679-1 / 36156-1 / 34864-1

NORTH/EAST ROOFING CONTRACTORS ASSOCIATION