INTERIOR RENOVATION BOQ INTERIOR · PDF fileinterior renovation boq shetgiri and associates...

INTERIOR RENOVATION BOQ SHETGIRI and ASSOCIATES

Description Qty. Unit Rate Amount

A SCHEDULE - INTERIOR FIXED ASSETS

WORKS

GENERAL NOTES: -

PARTITIONS / PANELLING

General Specification for partition :-

Finishing :-

SKIN: -12mm Exterior Grade Particle Board shall be screwed to frame work on both sides with

joints as shown or directed.

Make: Associate / Action Tesa / Eco boards/ Archid / Willson.

SKIRTING : In the same alignment, 3" high in 12mm thk Particle Board with a groove finished

with laminate / veneer as the case maybe, or as directed by the Architect.

VENEER:- 4mm thk natural venner with matching superior approved grade to be fixed to the

plywood having joints as shown or directed complete with melamine polish finish.

Make: Century / Durian / Archid or equivalent approved make

INTERIOR RENOVATION WORK FOR STATE BANK OF INDIA, SME

BRANCH MULUND (W) MULUND MUMBAI. (PRICE BID)

1. The plywood considered in this estimate shall be of Archid/Duro/Green/Century or

equivalant approved make commerical Plywood/Block board (as per sample approved by the

Architect/SBIIMS) for all the items of Interior & Furniture works.

2. The rate shall be inclusive of anti termite coating on all sides to plywood, teak wood & all the

other wooden components of Asian paints or equivalent approved make.

3. All internal woodwork / Plywood shall be treated with antitermite preservative.

4. All internal framework shall be of Aluminium unless otherwise specified as Teakwood.

5. AII exposed edges of Plywood shall be fixed with C.P. Teak Lipping of size as directed by

Architect.

6. The skinning shall be in 12 mm thk Exterior Grade Particle Board unless otherwise

specified.

7. All exposed veneer surfaces shall be finished with melamine polish . The thickness of the

veneer shall be 4.0mm & that of laminate shall be 1.0mm thk. However if the same shall vary,

no extra charges are payable for the additional thickness. The approved veneer shall be

finished with natural melamine polish of minimum 2 coats to have desired matt melamine finish

where ever specified.

8. Rate for full height partitions to include the cost of framework above false ceiling as required

to fix the same to the ceiling slab for which no extra payment shall be made and the rate

quoted shall be inclusive of the same.

9. Measurement of Partition & Panelling shall be limited upto 6" above False ceiling & no

separate payment shall be made for the work above 6".

10. Additional item if executed for AC purpose shall be measured in the relevant item.

11. The rate shall be also inclusive of pattas & bands, grooves at any level, any design in

veneer, textures etc including the necessary framing/ openings for Electrical, Telephone & AC

outlets.

Main frame - Aluminium sections of 16 Gauge mentioned are out of size 2"x2". Aluminium

section verticals at minimum 1' 6" - 2'-0" Centre-Centre spacing approx. and 2" X 1" size

Aluminium sections horizontal at 1' 6"-2-'0" Centre-Centre spacing approx. Extra frame below

slab soffit for conduit to run above. All verticals shall be secured to the ceiling.

2" X 2" 16 Gauge Aluminium sections = (3.200 kg/ 12RFt.)

2" X 1" 16 Gauge Aluminium sections = (2.100 kg/ 12RFt.)

Make: Jindal / Hindalco / MAAN

PRICE BID CIVIL,INTERIOR EL. Page1 of 37



1 Providing and fixing Full ht. double skin

Partitions as per specifications and finishes

including skirting, complete as per the drawings

and instructions complete in all respects as under:

Main frame - Consisting of 2" x 2" Vertical 16

Gauge Aluminium sections placed at approx. 1'-

6" to 2'-0" Centre to Centre and horizontal

members of sectional size (16G) 2" X 1" placed

at 1'-6" to 2'-0" C/C including necessary extra

framing below slab soffit for conduits to run

above. All verticals to be secured to ceiling/beams

bottom/sides in approved style using anchor

fastners as directed at site.

2" X 2" 16 Gauge Aluminium sections = (3.200 kg/

12RFt.)


12RFt.)


Skin:- Providing and fixing 12mm thk Exterior

Grade Particle Boards on Both sides using MS

screw to frame work with joints as shown or

directed.

Make: Action Tesa / Eco boards/ Archid / Willson

or equivalent as per sample approved.

SKIRTING : In the same alignment, 3" high in

12mm thk Exterior grade approved quality and

make Particle Board with a groove finished with

laminate / veneer as the case maybe, or as

directed by the Architect.

A --do--- as above but providing both sides of the

Partitions finished with 1.00 mm thk approved

quality and shade Laminate in the pattern &

design as shown in the drawing or as directed by

Architect including necessary grooves, skirting etc

complete.

Laminate Make :Royale touche / Century / Green

lam / Merino or equivalent approved.

Adhessive: Fevicol.

390 Sft

LAMINATE:- Approved laminate shall be of 1.00mm thick.

Make: Royale touche/Century/Green lam/ Merino or equivalent approved make




B --do--- as above but providing Partitions with 1.00

mm thick approved quality and shade Laminate

on One side & other side with 6mm thk Calcium

Silicate Board finished with 2 coats of approved

acryllic emulsion paint including POP punning for

surface preparation including necessary grooves,

skirting etc complete as shown or directed by

Architect.

128 Sft

C --do--- as above but providing Partitions finished

with approved quality and shade 1.0mm thk

laminate on one side & other side of the partition

to be finished with approved quality and make

4mm thk veneer finished with 2 or coats of

melamine polish includining applying

primer/preparation of surface as per sample

approved and as directed by Architect, including

necessary grooves, skirting etc complete.

Venner Make: Century / Durian / Archid or

equivalent approved make

80 Sft

D --do--- as above but providing partitions to be

provided with approved make Exterior Grade

Partical board on one side of the main frame

finished with 1.0mm thk approved laminate and

the other side of the main frame to be provided

with 12mm thick Gypsum board finished with 2

coats of approved acryllic emulsion paint as

shown and as directed by the Architect/SBIIMS

including necessary grooves, skirting etc

complete.

30 Sft

E --do--- as above but providing partitions to be

provided with approved make 12mm thick MDF

Board on both sides of the Aluminium framework

including finishing both sides with PU machine

polish as per sample approved including

necessary surface preparations, final finish etc

complete of approved shade, colour & texture as

shown in the drawing and as directed by the

Architect, including necessary grooves, skirting

etc complete.

205 Sft

F Finishing : Both side finished in 4.0 mm thk

approved Veneer including melamine polish of

desired finish, shade, texture etc complete as

shown in drawing or as directed by Architect,

including necessary grooves, skirting etc

complete.

124 Sft




G Finishing : Both side 6mm thk Calcium Silicate

Board finished with 2 coats of approved acryllic

emulsion paint including POP punning for surface

preparation including necessary grooves, skirting

etc complete as shown or directed by Architect.

80 Sft

2 Providing & Fixing in position full height Semi-

Glazed partition with folowing specifications:

Main frame - Consisting of 2" x 2" Vertical 16

Gauge Aluminium sections placed at approx. 1'-

6" to 2'-0" Centre to Centre and horizontal

members of sectional size (16G) 2" X 1" placed

at Floor/skirting level, 3'0" height level, door

height at 7'0" level for remaining spacing@1'-6" to

2'-0" C/C to be maintained including necessary

extra framing below slab soffit for conduits to run

above. All verticals to be secured to ceiling/beams

bottom/sides in approved style using anchor

fastners as directed at site.


12RFt.)


12RFt.)


Skin:- Both sides of the main frame shall be

finished with 12mm thk approved quality and

make exterior grade Partical board screewed to

the frame with joints as directed upto 3'0" level

and from 7'0" level to the top upto false ceiling

level including providing and fixing 8 mm thk.

clear glass of Saintgobin or equivalant approved

fixed with teak wood moulded beading duly

melamine polished/painted as directed by the

Architects/SBIIMS complete. The rate should

include providing and pasting frosted Polyster film

of Garware or equivalant approved make &

design and as per drawing and as directed by

Architect.

Particle board Make: Eco boards/ Archid /

Willson/Bhutan or equivalant as per sample

approved.

SKIRTING : In the same alignment, 3" high in

12mm thk Particle Board with a groove finished

with laminate / veneer as the case maybe, or as

directed by the Architect.




a --do--- as above but providing Partitions with 1.00

mm thick approved quality and shade Laminate

on One side & other side with 6mm thk Calcium

Silicate Board finished with 2 coats of approved

acryllic emulsion paint including POP punning for

surface preparation including necessary grooves,

skirting etc complete as shown or directed by

Architect.

20 Sft

3 Providing & Fixing in position about 4'-0" high

Low height Partition made out of 16 Gauge

hollow Aluminium section framing (Minimum

standard weigh as mentioned in this item). All

Vertical members to be of sectional size 2" X 2" 1

erected at 1' 6" to 2' 0" centres and Horizontal

members of size 2" X 1" to be placed at floor level

/ skirting ht. level as well as intermediate member

at 3'-0" level. Rate to include providing additional

members as per site requirement without extra

cost. The scope of work includes:

(i) 12mm. thk approved quality Exterior grade

Partical Board skin on both sides of the frame to

be screwed to the frame with joints as directed

upto 3'-0" height

(ii) Providing 8mm thk clear float glass of 1' 6"

height above 3'-0" level. The glass shall have a

height of 1'-0" on sides and 1'-6" in the centre

fixed with SS Studs / D brackets of approved

quality.

(iii) Including providing Polyster frosted film of

approved make & design on the glass.

(iv) The rate should include providing soft board

panel with felt cloth of approved texture, shade &

design, white board / white laminate in the centre

with a small shelf of 1'-0" projection with bevelled

edges in the centre of the soft board panels on

both sides.

(v) Rate includes sealing all the joints, beading for

the glass, grooves in laminate, melamine polish to

the moulding, beading & t.w members, complete

as per the directions of Architect. All Aluminium

sections shall be smooth, rust free, straight,

mitred and jointed mechanically. All works shall

be carried out as per Architectural drawings and

the directions of Engineer-in-charge.




Minimum Weight and makes of Aluminium

sections to be as under:

-Section 2" X 2" 16 Gauge = weighing @(3.200

kg/ 12RFt.)

-Sections 2" X 1" 16 Gauge = weighing (2.100 kg/

12RFt.)

Make of Aluminium sections: Jindal / Hindalco /

MAAN

Particle board Make: Eco boards/ Archid / Bhutan

/ Willson.

A --do-- as above but providing and fixing Partition

using Both side finished in 1.0 mm thk Laminate

as shown in drawing or as directed by Architect.

Laminate Make : Royale

touche/Century/Greenlam/ Merino or equivalent

approved make

415 Sft

B Partition using Both side finished in with 4.0 mm

thk approved veneer finished with melamine

polish as shown in drawing or as directed by

Architect.

Make: Century / Durian / Archid or equivalent

approved mak

40 Sft

4 Full Height Fully Glazed partition

A Providing and erecting in position full height

12mm thick Toughened Glass partiton fixed on

Patch fittings of Dorma/Hefle/Ozone of equivalant

approved by SBIIMS including 12mm thick

Toughned Glass door fixed on Heavy duty Dorma

or equivalant approved make Floor spring, 30mm

dia. & 600mm long S.S handle and locking

assembly from Dorma/Ozone complete.

The rate includes providing and pasting frosted

polyster film or bank's approved advertising film of

3M with computer aided design & cutting in

various colors & shade on the glass partitions &

Doors.

The scope of work includes cutting chases to the

floor and reinstating the same to its original

position without any extra cost including the cost

of other fittings & fixtures & hardware such as

spider panels, glass to glass contactors etc

complete, making necessary holes, joints to be

sealed with silicone sealant on all sides complete

in all respects etc as per directions of Architect.

The rate shall be inclusive of bent curved glass

panels wherever the partition is curved in profile

as shown in the layout plan.

320 Sft

B Same as above A….providing and fixing BACK

PAINTED 12MM THK. Toughned GLASS.

Make: Modi float Glass, Triveni Glass Ltd., Indo

Asahi Glass Co.Ltd./ Saint Gobain

50 Sft




5 Partitions above False Ceiling

Providing and extending frame works of full height

partitions wherever directed and finishing with 12

mm thk Exterior Grade Particle Board on both

sides and finishing the same with approved paint

including insulating with approved insulating

material upto soffit of beam or ceiling including

properly anchoring the same using Anchor

Fasteners etc. complete making necessary cut-

outs for AC ducts etc. complete wherever

directed.

100 Sft

6 PANELLING : -

(a) Providing and fixing in position wall/column

panelling made out of :

(i) Main frame comprising of 2" X 1" size

Aluminium sections (weighing 2.10 kg/ 12 Rft) of

Jindal / Hindalco / Maan or equivalant approved

make fixed to wall at 1'-6" to 2'-0" C/C in both

horizontal as well vertical direction including

providing extra frame/members as required as per

site condition below beam/slab soffit for running

conduit etc.

(ii) Providing 12mm thk exterior grade approved

quality and make Partical board to the framing.

(iii) Providing and pasting 4mm thk Veneer of

Archid, Green, Duro, Centure or equivalant

approved make including 3 coats of melamine

polish over approved base sealer coat including

contrast skirting & band at top in the same

alignment with a groove, teakwood moulding of

approved size complete as shown in the detailed

drawing or as directed by Architect.

335 Sft

(b) --do-- as above in item No.6(a) but Top finish of

the Column/Wall panelling with 1.0 mm thk

laminate of Century / Durian / Archid or equivalent

approved make including skirting & band at top

complete as shown in detailed drawing or as

directed by Architect

310 Sft

(c ) --do-- as above in item No.6(a) but Top finish of

the panelling with Interior Grade ACP of Aluco

bond/ ALU Decor/ Alstrong / Alstone or equivalent

approved make including skirting & band at top

complete as shown in detailed drawing or as

directed by Architect.

Rate to include cost of necessary partical board /

ply backing to match the level of other finishes

such as veneer /laminate etc. in required areas.

310 Sft




D --do-- as above but providing approved Fabric

over 9 mm thk commercial ply backing over

aluminium frame of specified makes. All around

the panelling, decorative teak wood mouldings

shall be provided and shall be finished with

melamine polish complete as per the instructions

of Architect.(Basic Price of fabric Rs.200/- to Rs.

275/- per meter).

85 Sft

E --do-- as above but providing wall panelling using

12mm thk IS:303 Commerical ply of

Green/Duro/Centure or equivalant approved

makes backing over aluminium framing finished

with 3mm thick designer, decorative MDF board

finished with two or more coats of Duco paint of

approved make, shade, colour & texture including

teakwood moulding of 3mm size all around the

periphery as directed by Architect.

180 Sft

F Providing & Fixing Soft Board panelling over

framework of 25 mm x 18 mm T.W. Frame at 600

mm c/c with 6mm IS:303 Commercial ply skining

on top & 12mm thk. soft board with fabric finishing

over ply complete as per drawings & directions of

the Architect/Engineer-in-charge, 25 mm x 12 mm

T. W.Moulding on edges (Basic Price of fabric

Rs.250/- meter).

55 Sft

G Providing & Fixing in position Mirror Panelling

using 6 mm thick Mirror of approved make over

19mm thick Archid/Green/Duro/Century or

equivalant approved make commercial board

backing. The mirror to be fixed with T.W beading

of size 12.5mm X 19mm, finished including

melamine polish complete as per the instructions

of Architects/SBIIMS.

50 Sft

H --do-- as above in Item No. 6(a) but providing and

fixing column/wall panelling finished with 6mm thk

Corian approved shade, colour & texture over

12mm thk particle board / 9mm thk plywood over

Aluminium frame including teakwood moulding of

3mm size all around the periphery as directed by

Architect

300 Sft

I --do-- as above but providing and fixing Wall &

Column Panelling finished with approved quality

and make 12mm thick MDF board and finished

with PU machine polish including necessary

surface preparations, etc complete in approved

shade, colour & texture including necessary

teakwood moulding of 3mm size all around the

periphery as directed by Architect

260 Sft




7 Flush doors

a Providing and fixing in position 32/35mm thk

factory make water proof Solid Core Flush door

shutters for Toilets, cabins, ancillary areas

specified to match the solid partitions including

2nd class BTC ( Berma Teak Wood ) frame of

100 X 50mm finished with 1.0 mm thk approved

laminate on both sides including providing 6mm

thick seasoned Teak wood lipping to edges duly

polished/painted in matching shade,

Dorma/Dorset/Hefle make door closure,

cylinderical mortise lock of Doset /Godrej with

computerised key, SS handles, 3 Nos. S.S.Butt

hinges (125x32x2mm), S.S.tower bolt 150 mm

etc. complete as per the directions of Architect.

Samples of all Hardware fittings to be got

approved from the SBIIMS/Architect prior to its

use at site.

(i) For Toilets (Without Mortice Lock) 21 Sft

(ii) For Cabins and other ancillary areas. 42 Sft

8 FULLY GLAZED DOOR :

Providing and fixing in position 12mm thick

toughened glass door including fixed side panel.

The door to be fixed with heavy duty Dorma make

floor spring, providing 300mm long 30mm dia SS

pipe handle and door lock of Ozone/Dorma or

equivalent make with necessary cutting chases in

floor and restoring the same to its original position

complete. Rate to include providing suitable

wooden Top and bottom rail, frosted Polyster film

as per detailed Architectural drawing complete.

84 Sft

9 FALSE CEILING

A Gypsum Board Ceiling: Providing, fabrication

and fixing in position of false ceiling at a hight of

10'0" from floor (or the hight will be desided on

spot as per the site conditions) by fixing 12 mm

Th. Gypsum Board sheets on frame work of GI

sheet section. The main runners of 22 gauge GI

sheet and cross runners of 24 gauge GI sheet

must be framed to form a mesh of 2'0"x2'0" c/c.

The Gypsum Board must be fixed to the GI frame

and joints must be properly filled in with POP

paste and paper tape, supplied by the

manufacturer, to get a leveled smooth ceiling,

including acrylic paint three or more coats.

Recessing of the Gypsum Board for light fixtures

must be done alongwith extra frame work of GI

sheet section to hold the consealed light fixtures.

1950 Sft

B False Ceiling ( Armstrong )




Providing and erecting false ceiling of Mineral

Fiber ceiling Board Armstrong or equivalent

approved make with framework, runners, cross

runners & suspenders from the existing ceiling as

per the manufacturers details and specification

and 600X 600mmX 15mm thk tiles of approved

design, texture & in microlook pattern including

the grids in black / white silhoutte pattern, 15mm

as per manufacturers specifications complete

including making necessary cut-outs for electrical

fixtures, AC diffusers, access etc as per the

instructions of the Architect.

Approved preminum Tile in Dune RH Microlook

category with black silhouette locking supporting

system, 15 mm grid.

Make: Armstrong /Indian Gypsum Board/Gypro.

600 Sft

C Providing and erecting false ceiling in veneer with

12 mm thk marine ply backing on teak wood

frame to be anchored to the main ceiling with

cross runners tongued and grooved. The ply to be

finished with approved 4mm thk veneer &

melamine polish etc. complete as per directions of

the Architect.

Venner Make: Century / Durian / Archid or

equivalent approved make

80 Sft

D Providing and erecting false ceiling in ACP with

12 mm thk marine ply backing on teak wood

frame to be anchored to the main ceiling with

cross runners tongued and grooved. The ply to be

finished with approved 3mm thk interior grade

ACP complete as per directions of the Architect.

50 Sft

E Providing and erecting false ceiling in colored

Corian with 6mm thk Corian over 12mm thk

marine plywood backing on teak wood frame to

be anchored to the main ceiling with cross

runners tongued and grooved, finishing the same

with corian of approved shade, colour & texture as

directed by Architect & complete as per drawings

& details.

50 Sft

10 Providing & Applying Plaster of Paris Punning up

to average thickness of 12 mm thk. on existing

walls to proper level & plumb, including Groove

Complete as per site conditions & directions of

the Architect.

250 Sft




11 Providing and erecting in position Plaster of Paris

Cornices 3" x 3" in size to the false ceiling.

Including filling the gaps with POP & painting the

same with Acryllic Emulsion paint of approved

colour and texture as per instruction of Architect.

100 Rft

12 Same as above but Roller Blinds of approved

make with supporting framework etc. of approved

make, shade & colour complete in working order

with triple spring arrangement as per

manufacturers specifications & drawings &

directions of the Competent Authority.

Make: Vista / MAC / DACK / Hunter & Douglas

150 Sft.

13 Providing and fixing Full height Storage of ht. 7'-

0" and depth as specified in the drawings as per

specification below.

Skeleton - made out of 19 mm. thk Commercial

ply at end verticals, top and bottom and verticals

450mm to 600mm Centres as shown in drawing

and 6 mm thk back marine ply.

SHELVES - 19mm Thk. Plywood top and edges

finished in 0.8mm thk. Laminate to accommodate

file height removable and supported on pins.

SHUTTERS-made out of 19mm thk. commerical

ply externally finished in 4.0mm thk. Veneer with

melamine polish or 1.0 mm thk laminate and

internally finished in 0.8 mm thk. laminate as

shown or directed.

HINGES - Each shutter shall have 100mm long

oxidised brass butt hinges. Mimimum 4 nos.

hinges for each of the shutter for Full height

Storage and 3 Nos. Brass hinges for each of the

shutter for Low Height Storage to be provided.

BOLTS - Flush tower bolts from inside at top and

bottom to the shutters and magnetic catch fixed

top and bottom.

LOCKS - of approved make 4 -lever brass body

dead lock with S.S. Key.

HANDLES - 100mm wide handles of C.P.. brass

as approved by the Architect.

SKIRTING -As instructed by Architect, in marine

plywood finished in Laminate.

BACK - Back side of storage to have 6mm thk.

Commerical ply with polish finish.

Finishing :- All external surface finish with 1.0mm

thk approved laminate. All the exposed wood

surfaces shall be finished in melamine polish. In

side visible surface complete with 0.8mm thk

Laminate. Top to have Teek wood moulding as

instructed. All internal wood-work to have coat of

anti termite of approved make before polishing.

80 Sft




SUM TOTAL OF SCHEDULES - INTERIOR

FIXED ASSETS WORKS

B SCHEDULE - FURNITURE WORKS

N.B: - The plywood considered in this estimate

shall be IS: 303 grade commerical Plywood for all

the items of Interior & Furniture works. The rate

shall be inclusive of anti termite coating on all

sides to plywood, teak wood & all the other

wooden components of Asian paints or equivalent

approved make.

1 Providing and fixing Low height Storage of ht. 2'-

6" or 4'-0" as desired and depth of 18" as

specified in the drawings as per specification

below.

Skeleton - made out of 19 mm. Thk IS:303 Grade

commerical Plywood (IS:303) at end verticals, top

and bottom and verticals 450mm to 600mm

Centres as shown in drawing and 6 mm thk back

ply.

SHELVES - 19mm Thk. IS:303 Grade commerical

Plywood finished with approved quality 0.8mm

thk. Laminate on both faces including edges to

accommodate file height removable and

supported on pins.

SHUTTERS-made out of 19mm thk. IS:303

commerical Plywood externally finished in MDF

with PU or 1.5mm thk laminate or 3.0mm thk.

Veneer with melamine polish and Internally

finished in 0.8 mm thk. Laminate as shown or

directed.

HINGES - Each shutter shall have 100mm long

oxidised brass butt hinges. Mimimum 4 nos.

hinges for each of the shutter for Full height

Storage and 3 Nos. hinges for each of the shutter

for Low Height Storage to be provided.

BOLTS - Flush tower bolts from inside at top and

bottom to the shutters and magnetic catch fixed

top and bottom.

LOCKS - of approved make 4 -lever brass body

dead lock with S.S. Key.

HANDLES - 100mm wide handles of C.P brass as

approved by the Architect.

SKIRTING -As instructed by Architect, in plywood

finished in approved 1.0 mm thk laminate or 4.0

mm thk veneer with melamine polish.

BACK - Unexposed back side of storage to have

6mm thk 303 commerical Plywood with polish.

However exposed back of the storage shall be

finished with 1.0 mm thk laminate finish.

TOP - To be finished with 12mm thk Corian top

duly finished.




A Finishing :- All external surface finish with 1.0 mm

thk approved laminate. Exposed top to be finished

in 12mm thk designer Corian and shutters in MDF

board with PU including necessary surface

preparation, finishing the same etc complete. All

exposed surfaces shall have beading patti in

laminate. Inside visible surface complete with

0.8mm thk Laminate. Rate shall also include tw

moulding for the top duly polished wherever

instructed.

105 Sft

C Finishing :- All external surface finish with 4.0 mm

thk approved veneer with polycoat polish.

Exposed top to be finished in 12mm thk designer

Corian and shutters in MDF board with PU

including necessary surface preparation, finishing

the same etc complete. All exposed surfaces shall

have beading patti in laminate. Inside visible

surface complete with 0.8mm thk Laminate. Rate

shall also include tw moulding for the top duly

polished wherever instructed.

32 Sft

D Finishing: - Do - Same specifications & including

all items as mentioned above, but Overhead

storage of 2'-0" height and length as desired for

the server room, UPS room & Pantry to be

finished with approved 1.0mm thk approved

laminate. The top of this storage shall also be

finished with approved 1.0 mm thk laminate.

30 Sft

2 Providing and erecting in position Side Credenza

for the tables, 2'6" height and 18" deep to be

made out of 19mm thk 303 commerical Plywood

. All exposed surfaces shall have beading patti in

laminate / veneer with melamine polish. Rate shall

also include tw moulding for the top duly polished

wherever instructed with 2 nos of drawers on top

and openable shutters below. The openable

shutters to be made out of 19mm thk. 303

commerical Plywood with all internal surfaces to

be finished in 0.8 mm thk approved laminate and

externally with 1.0 mm thk laminate or 4.0mm thk

veneer with melamine or polycoat polish including

brass hinges, ball catches, 100mm brass handles,

brass locks etc complete as per the instruction of

the Architect.

A All exposed surfaces to be finished with approved

veneer, 4 mm externally with polycoat polish as

directed.

Make: Century / Durian / Archid or equivalent

approved make

8.75 Sft

B All exposed surfaces to be finished with approved

1.0 mm thk laminate externally as directed.

Make: Royale touche/Century/Green lam/ Merino

or equivalent approved make

44 Sft




C Finishing :- All external surface finish with 4.0 mm

thk approved veneer with polycoat polish.

Exposed top to be finished in 12mm thk designer

Corian and shutters in MDF board with PU


the same etc complete. All exposed surfaces shall

have beading patti in laminate. Inside visible

surface complete with 0.8mm thk Laminate. Rate

shall also include tw moulding for the top duly

polished wherever instructed.

18 Sft

3 Table for B.M (Maximum 6'-6" X 3'-0")

Providing and supplying table for the B.M to be

made out of 19mm thk. IS: 303 Grade commerical

Plywood finished with approved 4.0mm thk high

end veneer with polycoat polish for the top & 4.0

mm thk veneer with melamine polish for all other

exposed areas. The top of the table to have t.w.

moulding all around. The rate shall be inclusive of

providing a keyboard tray on sliding telescopic

channels & a pedestal drawer unit made out of

16mm thk IS: 303 commerical Plywood on side

with 2 nos of equal sized drawers on sliding

channels & openable shutter below. The side

credenza shall be on the other side & shall be

paid for seperately under the relevant item. All

internal surfaces to be finished in approved

0.8mm thk laminate. All the external surfaces

shall be finished with 4.0mm thk approved high

end veneer with melamine polish including the

pedestal drawer unit.

1 Nos

The table shall have 6mm thk clear glass on top

with bevelled edges. The rate shall also include

CPU trolley of reputed manufacturer, keyboard

tray as per the approved makes which shall be

heavy duty. The necessary hardware such as

automatic locking, ball catches, wire managers

etc. to be provided as per the instructions of the

Architect. The Elevation of the table shall be as

directed by Architect on site.

4 OfficersTable (5'-0" X 2'-6")




Providing and supplying table for the Senior

Officer / Manager to be made out of 19mm thk

IS:303 Grade commerical Plywood finished with

approved 12mm thk Corian for top including 1.0

mm thk laminate for all other exposed areas. The

top of the table to have corian moulding all

around. The rate shall be inclusive of providing a

keyboard tray on sliding telescopic channels & a

pedestal drawer unit made out of 16mm thk IS :

303 Grade commerical Plywood on side with 2

nos of equal sized drawers on sliding channels &

openable shutter below finished in 1.0 mm thk

laminate. The side credenza shall be on the other

side & shall be paid for seperately under the

relevant item. All internal surfaces to be finished

in approved 0.8mm thk laminate.

5 Nos

All the external surfaces shall be finished with

1.0mm thk approved laminate including the

pedestal drawer unit. The rate shall also include

CPU trolley of reputed manufacturer, keyboard

tray as per the approved makes which shall be

heavy duty. The necessary hardware such as

automatic locking, ball catches, wire managers

etc. to be provided as per the instructions of the

Architect. The Elevation of the table shall be as

directed by Architect on site.

5 Linear Work Stations for Staff

Providing and erecting in position linear work

station of 3'-0" in length and 2'-0" in width as per

the instructions to be made out of 19mm thk. ply

for work top with the top to be finished with 3.0mm

thk approved veneer with melamine polish for the

top surface with front part of it in t.w moluding out

of 1 1/2" X 1 1/2" t.w section to be finished with

veneer and melamine polish & 0.8mm thk

approved laminate for the bottom portion of the

work top to be supported on the adjacent low

height partitions. (The partitions shall be paid for

seperately under the relevant item). The rate shall

be inclusive of necessary fittings, supporting

arrangements to the partitions, heavy duty

keyboard tray of standard make, CPU trolleys of

approved make & a pedestal drawer unit with

castors to be made out of 16mm 303 commerical

Plywood with 3 nos of equal sized drawers on

telescopic channels.

2 Nos




The external exposed surface of the drawer unit

shall be finished with 4.0mm thk approved veneer

with melamine polish. The unit shall have locks,

handles, hinges, channels, necessary fittings,

fixtures, hardware, automatic locking

arrangement, wire managers etc. The internal

surfaces of the drawer unit shall have polish and

the internal surfaces of individual drawers shall be

finished with 0.8mm thk approved laminate

including providing the necessary openings for

electrical/computer wiring complete as per the

instructions of Architect. The rate shall also

include providing stand-alone foot rest to the table

of projection width as directed to be finished with

approved veneer with melamine polish etc

complete for the entire length of the table.

Elevation of the table shall be as directed by

Architect on site.

The unit shall have heavy duty locks, handles,

hinges, channels, necessary fittings, fixtures,

hardware, automatic locking arrangement, wire

managers etc. The internal surfaces of the drawer

unit shall have polish and the internal surfaces of

individual drawers shall be finished with 0.8mm

thk approved laminate including providing the

necessary openings for electrical/computer wiring

complete as per the instructions of Architect.

Elevation of the table shall be as directed by

Architect on site.

6 WORKSTATION FOR SWO's & CASH ( 5'-0" x

2'-9" )

Providing and erecting in position linear work

station of maximum of 5'-0" length and 2'-9" width

as per the instructions and drawings to be made

out of 19mm thk. 303 commerical Plywood for

work top and verticals finished with 1.0mm thk

approved laminate externally for all the exposed

surfaces except the top, which shall be finished

with 12mm thk Corian top including necessary

surface preparation, finishing the same etc

complete & 0.8mm thk approved laminate

internally. The top of the table to have Corian

nosing mould all around. The rate shall be

inclusive of providing a keyboard tray on sliding

channels & a drawer unit on side with 2 nos of

equal sized drawers on channels with internal

seperations in ply for keeping temporary cash &

openable shutter below.

5 Nos




The side credenza however shall be paid for

seperately in the relevant item. The rate shall be

inclusive of CPU trolley of approved make,

necessary fittings, fixtures, hardware such as

channels, hinges, ball catches, automatic locking

arrangament, wire managers etc including

providing the necessary openings for

electrical/computer wiring complete as per the

instructions of Architect. Elevation of the table

shall be as directed by Architect on site.

7 Providing & Errecting in position, bevelled Glass

dividers out of 10mm thk glass between the two

workstations admeasuring approx 2''-3" X 1'-6" to

be placed in position with the D-brackets including

bevelled edging of the glass, etching / frosted film

etc complete

4 Nos

8 Grahak Mitra counter

Providing and supplying Grahak Mitra counter of

size 6'-0" in curvature and 2'-6" height with

chamfer edge glass 12mm thk for top on stainless

steel hollow pipes 75mm dia & height below 1'-0".

The table below the pipe to be made out of 19mm

thk IS:303 grade commerical Plywood with front

apron to have 19mm thk IS:303 grade

commerical Plywood hollow box to be finished

with approved 18mm thk onyx italian marble

including provision of coloured lighting behind the

onyx for glowing effect. The top of the table shall

be provided with approved 12mm thk Corian


the same etc complete with a cut out for Monitor

with 12mm thk glass on the top of the table with

pedestal drawer unit with castors comprising of 3

nos of drawers on side to be finished with

approved 3.0mm thk approved veneer with

melamine polish, CPU trolley of standard make

and a shelf for keeping the Monitor below the

glass top with heavy duty keyboard tray on sliding

channels of standard make including s curved in

profile as shown in the layout plan.

1 No

All exposed surfaces of the counter shall be

finished with approved 18mm thk italian marble

except for the top in Corian & drawer unit which

shall be finished with 4.0mm thk veneer with

melamine polish & internal surfaces shall be

finished with 0.8mm thk laminate including

making the necessary openings for wires of

telephone boards, PC, grooves, mouldings, etc

complete.

9 DINING TABLE




Providing and supplying 5'-0" rectangular dining

tables made out of 10mm thk Glass top with

design etching pattern with bevelled edges. The

table to have Stainless steel stand of 4" dia. Pipe

in the centre with 4 flange supports in a cross

pattern at top & bottom etc. complete as per

instructions and drawings.

1 No.

10 Computer Counter

Providing and erecting computer counter (2'-3")

wide to made out of 19mm thk. 303 commerical

Plywood . The counter to have lockable heavy

duty keyboard trays with a pedestal drawer unit

with 3 nos of equal sized drawers at regular

intervals as per the plan in 19mm thk. IS: 303

commerical Plywood with necessary opening for

electrical wiring & sockets. The counter shall be

finished with approved 1.0mm thk laminate for all

the external exposed areas and polish internally

etc complete as per design & instructions. The

rate shall be inclusive of CPU trolleys, foot rest,

wire manager, provision for electrical sockets etc

complete.

5 Rft.

11 Corner Table ( 2'-0" x 2'-0" )

Providing and supplying in position corner table to

be made out of 2" x 2" t.w. frame with 12mm thk.

clear glass top with bevelled edges and etching

with melamine polish etc. complete.

1 No.

12 Center Table (3'-0" X 2'-0" Oval / Rectangular)

Providing and supplying in position oval center

table to be made out of 2" x 2" t.w. frame with

12mm thk. clear glass top with bevelled edges

and etching with melamine polish etc. complete

as instructed by Architect.

1 No.

13 WRITING DESK

Writing desk at entrance area in 19mm 303

comm. Ply and 1mm laminate finish surface 12

mm clear glass on top with shelves/partation in

glass to keep sleep books including acid etching /

frosting of approved design and exposed edges in

machine polished.and bank’s printed broachers

for public complete as per Architect’s design and

instructions. Size: 3’-0” x 1’-6” x 1 no.

1 No.

14 Planter Boxes (18" Dia)

Providing and supplying 14" dia planter boxes to

be made out of 19mm thk. 303 commercial ply to

be with approved veneer,4mm thk externally &

painted from inside including G.I. Tray for the

base as per the drawing and instructions of the

Architect etc. complete.

5 Nos.




15 Artificial Plants

A Providing and supplying artificial plants approved

by Architect such as moss and including

necessary stand for holding the plants as per the

approved sample.

5 Nos.

B Same as above but medium size 8 Nos.

16 Trap Door

Providing and erecting in position trap door in

12mm thk 303 commerical Plywood to house,

A.C. ductable units to be made out of 2" x 11/2"

t.w. frame with openable shutter in ply with

necessary hinges, tower bolts, locks, painting etc.

finished as per the instructions and design.

30 Sft

17 Sun Control film

Providing and fixing designer etching frosted film

of approved make and shade (3M, Llumar or

approved equivalent make by the Bank) to the

glass complete as instructed by Architect

130 Sft.

18 PELMETS:

Providing and fixing 5" wide Pelmet with 18mm

thk IS:303 commerical Plywood including t.w

lippings on all edges of the plywood and finished

on both sides etc complete as per the

instructions.

Finished in 1.0mm thk approved laminate on both

sides100 Sft

Finished in 4.0mm thk approved veneer with

melamine polish on both sides60 Sft

19 Collapsible Gate

Providing and fixing in position collapsible steel

shutters with vertical channels 20x10x2mm and

braced with flat iron diagonals 20x5mm size, with

top and bottom rail of T-iron 40x40x6mm, with

40mm dia steel pulleys, complete with bolts, nuts,

locking arrangement, stoppers, handles, including

applying a priming coat of approved steel primer

and 2 or more coates of approved synthetic

enamel paint of approve shade and make to give

and even shade.

90 Sft

20 NOTICE BOARD:

Providing and Supplying Notice Boards 8 cm

deep made out of BTC T.W framing 8cm X 24mm

with 12mm thick Soft Board covered with cloth felt

on 6mm IS:303 Commerical grade Ply back and

glass shutters openable on pivot hinges complete

with lock and handle. Size-1.20 m X 60 cm

complete as per the drawings, details &

instructions of Architect.

1 Nos

21 WHITE BOARD WITH CERAMIC COATING:




Providing and fixing White board(magnetic) with

ceramic coating including soft board with fabric of

approved shade and design complete as per the

drawing & specification given by Architect .

20 Sft

22 PATTA & BANDS:

Providing and fixing 75mm wide Patta on the wall

with 12mm thk IS:303 Grade commerical

Plywood including 12 mm t.w beading with

polishing etc complete as per the instructions.

aFinished in 4.0mm thk approved Veneer with

melamine polish30 Sft

b Finished in 1.0mm thk approved laminate. 40 Sft

cFinished in 4mm thk MDF with melamine polish /

acryllic emulsion paint 80 Sft

23 KEY HIVE:

Providing & Fixing Key hive of size 600 X 900mm

made out of 12mm thk IS:303 grade commerical

Plywood backing with openable type shutter to be

made out of 19 X 75mm outer frame with 6mm thk

glass. All exposed surfaces to be finished with

1.0mm thk approved laminate and all internal

surfaces to be finished with 0.8mm thk approved

laminate including 75mm handle, 2 nos of 75mm

hinges for the shutter, locks etc complete as per

the drawing.

1 Nos

SUM TOTAL OF SCHEDULES - FURNITURE

WORKS

C SCHEDULE - CIVIL WORKS

1 Demolition / dismantaling

A Demolishing brick work manually/ by

mechanical means on Ground floor level and all

floors up to 6th floor including stacking of

serviceable material and disposal of

unserviceable material within 50 metres lead.

Including carting away the unserviceable material

to dumping ground Location as approved by

Municipal Corporation of Navi Mumbai

immediately at intervals

Cu.ft. 120

B Demolishing R.C.C. work,flooring, precast

concrete jalli manually/ by mechanical means

on Ground floor level and all floors up to 6th floor;

including stacking of steel bars and disposal of

unserviceable material within 50 metres lead.

Including carting away the unserviceable material

to dumping ground Location as approved by

Municipal Corporation of Greater Mumbai

immediately at intervals

Cu.ft. 160




C Demolishing/dismantaling loose furniture,

false ceiling, electrical fixture etc. of all type of

existing , partitions, false ceiling, loose

equipments, doors, windows & fixed glazing,

fans, lighting fixtures, electrical assessories of all

types, gadgets, cables & wires, AC ducts & grills,

All type of AC assessories, Fire pipes, Sprinklers,

All other type of Electrical Assessories, table &

credenzas, storage units of all types, all types of

furniture & fixtures, workstations, Interior items,

fixed & loose items, as per directions etc and any

other material required for working on site &

compliance of all the activities on site

L.S

The quoted amount shall also include the removal

of debris from site on day to day basis including

removing the same with utmost care to ensure no

damage in case of reusable fixtures, fittings,

assessories & materials of all types including

handing over the same to the State Bank or

shifting the same to a new desired place and re-

fixing the same if desired under the instructions

and directions of the Consultant or Bank's

Engineer-in-charge.

2 PAINTING :

Note : The Rates for the Painting works shall be

inclusive of three coats. The paint should be free

from lead and Arsenic.

A Painting of wall with minimum of 3 coats of Flat

Oil Paint of approved shade & make on the wall,

plywood or gypboard including all necessary

surfaces preparation. The wall shall be cleaned,

filled with putty & applied with one coat of primer

so as to achieve a even surface to apply paint. As

per the directions / to the satisfaction of the

Architect / Engineer in charge.

Make: Asian/Nerolac/ Berger/Dulex.

100 Sft

B Providing and applying acrylic aggregate textured

wall coating in oikos pigmented Ornaplast finish in

any shade spray coat bubble or compact or rustik

shade, maintaining material consumption rate of

average 2.25 Kg. Per sq.mt. and 1.5mm thickness

on walls. The rate shall include POP punning to

the wall up to average thickness of 12 mm to

proper level & plumb, including grooves etc,

scrapping, base coats etc, cleaning of the walls

etc complete.

Make:Sandtex Matt/ Dulux/Berger.

80 Sft




C Providing and applying Acrylic Emulsion Paint in

minimum of three coats of approved make and

shade on Walls, Ceiling, plywood, gypsum board,

surfaces etc including all the necessary surfaces

preparation, POP punning to the wall up to

average thickness of 12 mm to proper level &

plumb, including grooves etc scrapping, base

coats etc to receive 3 coats of paint. The wall

shall be cleaned, filled with putty & applied with

one coat of primer so as to achieve a even

surface to apply paint. As per the directions / to

the satisfaction of the Architect.

Make: Asian/Nerolac/ Berger/Dulex

3500 Sft

3 FLOORING :

a Providing and laying 9mm thk Mirror finish super-

premium range, digital and high gloss Vitrified

Tiles of approved makes of size 600 x 600 x

9mm thk (Min) laid in required pattern on an avg.

25 to 30mm thk. bed of 1:4 cement mortar (1

cement : 4 coarse sand) including inlay design

work in 18mm thk Granite stone and contrast dark

coloured Vitrified tiles approved by the Architects

and approved design in proper line and level

including neat white cement float, filling joints with

neat cement slurry, of appropriate colour, curing

and cleaning complete.Tiles shall be free of any

variation in colour or texture, and laying plastic

sheet & 18mm thk. POP protective cover on

flooring and removing when directed.

The cost to include sealer treatment of approved

brand. The rate shall be inclusive of application

chemicals and Roffe and levelling with min 3"

PCC wherever level difference is observed to

attain a uniform level all throughout the premises.

The rate shall also include providing and fixing

heavy duty brass patti of desired length, width for

the areas of the inlay works etc complete as

directed by the Architects.

Make: Kajaria/ Somany / H.R.Johnson/ Nitco /

Simpolo

2471 Sft

b Providing and laying Laminated Wooden flooring

of approved make on floor in a design

combination of two different colours as per the

drawing & instructions on levelled floor including

levelling the surface of application area with

P.C.C, insulating the areas, surface preparation,

bedding, finishing, polishing, cleaning including

skirting patti as per manufacturers specifications,

moulding etc complete as per the directions and

instructions of the Consultant. The rate shall be

inclusive of edge moulding & end strips at the

junction between the floor and the vertical

surfaces and mouldings, T grooves etc complete.

(Basic rate of tiles = Rs. 180 / Sq Fts.)

Make: Pergo/Tiles/ Xylos/Armstrong/Vista.

170 Sft




c Providing and laying wall tiles toilet premium

quality textured design digital series ceramic tiles

of approved size such as 12" X 18" or 12" X 24"

etc or appropriate size matching the floor grooves

of approved make and shade in dado in

combination with black granite skirting, blach

granite patta as wash basin level and at 7'-0" level

including designer tiles in combination in a

required pattern and design including Cement

Mortar 1:4 ( 1 Cement : 4 Coarse sand ) in proper

line and level including neat white cement float,

filling joints with neat cement slurry, of appropriate

colour, curing and cleaning complete.Tiles shall

be free of any variation in colour or texture. (Basic

Rate of Tile shall be Rs. 80/- S.Ft)

210 Sft

e Providing and laying flooring tiles toilet premium

quality textured design digital series ceramic tiles

of approved size such as 12" X 12" or 24" X 24"

etc or appropriate size matching the grooves of

wall tiles of approved make and shade laid in

required pattern on an avg. 25 to 30mm thk. bed

of 1:4 cement mortar (1 cement : 4 coarse sand)

in proper line and level including neat white

cement float, filling joints with neat cement slurry,

of appropriate colour, curing and cleaning

complete.Tiles shall be free of any variation in

colour or textureetc complete. (Basic Rate of Tile

shall be Rs. 80/- S.Ft)

42 Sft

f Providing and fixing approved Mirror polished

approved Granite slab flooring (Raw Silk Granite /

Lakha Red Granite) with inlay work in jet black

granite wherever instructed for treads, risers,

landings, toilet floors, pantry, bunds, entrance

areas, waiting lounge, cills, urinal partitions,

counters of any type, jambs, strips & frames of

18mm thk. and size upto 8' x 6' as shown over

and including avg. 25 to 30mm thk. 1:4 (1 cement

: 4 coarse sand) bedding in proper line & level

including the joints to be finished flushed in

matching colour cement, curing, washing,

cleaning and rate to include for chipping and

levelling existing floor and laying plastic sheet &

18mm thk. POP protective cover on flooring and

removing when directed as req., including

moulding and 1/8" grooves complete as per

drawings & details, and as directed. Basic rate of

Granite shall be With rate dubble patti Rs. 200 /

sq fts.

90 Sft.

4 Pantry Counter




Providing and erecting pantry counter 2'-0" wide

in kadappa undercarriage of 11/2" thk. one side

polished and top to be in 20mm thk Raw silk

granite of the desired shape & size. The counter

to be supported with sandwitch cadappa verticals.

The granite facia 4" & 6" to be fixed to verticals

and top with edge polish and cutting for sink etc.

complete as per instructions of the Architect

including required nos of S.S service trolleys

below with sliding standard sections as per

manufacturers specifications, S.S Sink of nirali

make of size 24" X 17"X 8" and necessary piping,

plumbing fittings, fixtures of jaguar make etc

complete.

6 Rft

4 Providing and Fixing Synthetic Door matting

system from LG or Nomad as per manufacturers

specifications to match the finished floor level in

the adjoining areas

20 Sft

4 Providing and placing ready made SS'dust bins'

of diameter not less than 300 mm made out of

perforated SS sheet with edges rounded, the

base shall be of SS plate of thickness not less

than 2.00 mm

9 Nos

5

ALUMINIUM COMPOSITE PANELS &

STRUCTURAL GLAZING CLADDING ON

EXTERNAL FRONTAGE WALLS

Supplying and errecting in position combination of

Exterior Grade Aluminium Composite Panels and

Structural coloured Glass of approved make

including 4 mm thick comprising of polyethylene

core between two skins of Aluminium with exterior

surface coated with DVDF resins as per ASTM or

BS standards including Aluminium wall brackets.

Aluminium runners horizontal and vertical as per

the Manufacturers standard errection including

filling of the gaps etc finish. Detailed technical

annexure of manufacturer will be approved by the

Architects.

200 Sft

6 MISCELLANOUS CIVIL WORK

A Plumbing work




Providing and fixing in position internal and

external damaged Sanitary and Water supply

pipelines to be PVC and / or c-PVC concealed in

wall / floor with bitumen treatment and covered

with hessain cloth. All joints to be water tight and

properly sealed. Drainage pipes shall be heavy

duty ISI marked including all necessary high

quality fitting such as bends, tees, flanges,

elbows, coupling, reducer, unions, checknuts etc.

joining with taflon tapes, excavation, refilling,

consolidating where ever required. Note: - since

all the pipelines are already covered under the

respective items of WC's and Wash basins, the

said item shall be operated and items quntified

only as per the directions of the Architect or Client

and whenever any additional pipelines are

required to be laid within the toilets or any other

area, within the premises and on the floor.

L.S

B Sanitary Ware

Providig and fixing of white coloured sanitaryware

of approved make and shape.

I Wall mounted EWC (36X34.5X54.5cms) including

its complete set of assessories such as flushing

cistern - flush tank, water jet arrangement,

telephone jet arrangement for WC, M.S.chair -

PVC seat cover, bends, other assessories,

fittings, fixtures etc complete. The rate shall also

be inclusive of concealed flush tank or with

provision for flush valve including necessary

supply line from external point source upto the

flush valve / flush tank, water jet and telephone jet

etc complete as per approved makes.

2 Nos.

C Sanitary Fittings & Fixtures

Providing and fixing CP sanitary fittings of Jaquar

make as follows.

I Angle Cock 3 No.

ii Stop Cock 4 No.

iii Bib Cock 2 No.

iv Soap Holder 4 No.

v Towel Rod 3 No.

vi Coat Hooks 2 No.

vii Nahani Trap jali 3 No.

viii Pillar cock 3 No.

ix CP brass Liquid Soap containers of Askon or

equivalent make 3 No.

xi Mirror panelling on ply 2 X 2 3 No.

xii Frames for Exhaust Fans in t.w frame 2" X 11/2"

incl painting3 No.




xiii Providing & fixing Oval shaped over mounted

wash basin over granite counter (Granite counter

shall be paid seperately under relevant item) with

moulding below the basin including heavy duty

bottle trap, waste coupling, pillar cock, stop cock

and necessary fittings and fixtures etc. complete

in all respects as per manufacturers

specifications, standard fittings & fixtures etc

complete.

2 No.

SUM TOTAL OF SCHEDULES - CIVIL WORKS

S.N. PARTICULARS QTY UNIT RATE AMOUNT

A MAIN LT PANEL / DB'S

1

Supply, installation, testing & commissioning of

125A IC TPN SFU with 125A HRC fuses (L&T /

EE make) 440 V 3 phase & neutral 50 c/s AC23

duty on MS angle iron frame fabricated out of

40 mm. x 40 mm. x 5 mm MS angle duly painted

with cable end boxes, earthing, name plate

danger board fixing accessories etc.

1 Set

2 MAIN ELECTRICAL LT PANEL - Supply and

Installation of main LT panel, floor mounted, front

operated, dead back, totally enclosed vermin

proof, indoor, non-drawout, cubicle type power

dist. panel fabricated out of 2mm thick CRCA

sheet having gasketed hinged door on each

cubicle, fully powder coated / enamel painted after

seven tank treatment, incorporating horizontal and

vertical sleeved copper / aluminium busbars

'complete with all internal wiring, danger board,

two earthing lugs, cable chamber etc. as required

'housing below mentioned switchgears / meters.

Note :- GA & Control Drawing of the panel

shall be approved by the Client / Consultant

before fabrication. (Panel shall be

manufactured from CPRI approved

manufacturer only.) All test certificates for

Panel shall be submitted alongwith the

delivery of Panel at site.

2.1 (MAIN LT PANEL)

INCOMER:

1 no., 125A, (36kA) 415V 50Hz FP MCCB

complete with neutral & accessories as incomer

with O/L, S/C protections

1 no. 4P Voltage Surge Protector / Arrestor

including LED indicators alongwith necessary

accessories.

OUTGOINGS:

1 Nos.,100A,TPN, MCCB as outgoing complete

with neutral & accessories (MAIN AC DB)

INDICATIVE PRICE FOR ELECTRICAL & ALLIED WORKS




5 Nos., 63/40A,TPN, MCB as outgoing complete

with neutral & accessories. (For UPS I/P - 1

no.s, LDB - 1 no.s, RPDB- 1 no.s, ATM - 1 no.s,

Spare - 2 no.s)

3 Nos., 40/32A,DP, MCB as outgoing complete

with neutral & accessories (For Signage - 1 no.s,

Spare - 2 no.s)

BUSBAR:

1 Set of 200A TPN tinned Copper busbar with

PVC sleeving & accessories

INDICATORS:

1 Set, RYB, indicating lamps with resistors and

fuses

METERING:

Load Manager with RS 485 port indicating Pf,

KW, KVA, KVAr with class A CT- 1 no

2.2

INBUILT APFC PANEL - With inbuilt solid state

automatic power factor correction arrangement

having microprocessor based control circuit and

thyristor switching power circuit having a required

capacity of 30KVAR having capacitor bank in

steps of [(1 x 10 KVAR) + (3 x 5 KVAR)+ (1 x 3

KVAR) + (1 x 2 KVAR)], including main MCCB,

MCB's, APFC relay, contactors, capacitors,

indicating lamps, etc. complete with all necessary

hardware & accessories as mentioned below :-

a INCOMER

1 No. 80A, FP, 36kA, MCCB with Thermal

Magnetic release, of approved make with built in

over load (O/L), short circuit (S/C) protection. The

Breaker shall be suitable for 415 Volts 50 Hz., AC

supply. The breaker shall have breaking capacity

of 25 KA for 1 Sec. (For APFC Panel Main

Incomer - 1 no.)

b BUSBARS

1 Set of 150 Amps uniformly rated, continuous

duty, 415V AC, 3-Phase & Neutral electrolytic

grade 99.95% Purity Tinned Copper bus-bars with

colour coded heat sink sleeves supported on

SMC type grip supports. The Horizontal / Vertical

sections of the busbars should all be uniformly

rated for 150 Amps.

1 Set of 25 x 5 mm copper busbars of high

conductivity electrolytic quality shall be provided

throught out the panel for its earthing.

c INSTRUMENTS

1 no. 0-500V Digital Voltmeter of suitable size & 1

no. suitable size Digital Ammeter

1 Set of phase indicating lamps, LED type, RYB.

1 Set of 2A 10kA C curve SP control MCB

1 no. 6 stage microprocessor based digital type

APFC relay

1 set overvoltage, undervoltage, phase protection

relay.PRICE BID CIVIL,INTERIOR EL. Page27 of 37



6 set On, Off push button, auto manual selector

switch.

6 set On, Off LED type indication lamp

d OUTGOING

1 Nos. 63A, TPN, D curve, MCB

3 Nos. 32/40A, TPN, D curve, MCB

2 Nos. 25A, TPN, D curve, MCB

1 No. 2 kVAR MPP heavy duty capacitor with

capacitor duty contactor & 7% detuned harmonic

filter.



filter.



filter.

1 Nos. 10 kVAR MPP heavy duty capacitor with


filter.

The panel shall be provided with required nos of

louvers in the capacitor chamber for its cooling.

Also required nos of ventillation fans with auto

sensing thermostat shall be provided in the panel.

The switching of capacitors shall take place at

zero crossing level to reduce harmonics and

improve capacitor life.

Full Set as above 1 NOS

3

Suply and installation of 4-way, VTPN, Double

door, (MCCB DB) Emergency Main Power

Distribution Board (EMG MPDB), having vertical

fishbone busbar type, factory

a INCOMER

1 No. 100A, FP, 36kA / 25kA, MCCB with

Thermal Magnetic release, of approved make with

over load (O/L), short circuit (S/C) & Earth Fault

(E/F) protection. The Breaker shall

b OUTGOINT

4 Nos., 63/40A, TP, MCB, "C" curve type as

outgoings (3P AC M/C-no,s-1, AC M/C- no,s-2,

AC M/C-no,s-3, 4W TPN ACDB)

Full Set as above 1 Nos

4 Suply and installation of 4-way, PPI TPN, Double

Door, Metal type, with Plain / Transperant Door

(As approved by client / consultant / architect),

Lighting Distribution Board (LDB), surface / flush

mounted on wall, interconnected wiring complete

with earthing lugs, including DB wiring dressing

with ferruling, termination of circuits with ping type

copper lugs, blank plates, etc. housing following

switchgears : (Schneider / Hager / Siemens /

Legrand make as approved by client / consultant)




(Note :- DB size & type selection shall be done

with reference to the total number of modules

/ poles available in the DB which shall be

suitable for housing of below mentioned

switchgears & components forming a

complete set.)

a

1 no.,40A, FP MCB, "C" curve type as incomer

with 230V AC, 1M x 3 no.s overvoltage release

protection module.

3 no.s, 32A, DP RCBO with sensitivity of 100mA,

as sub-incomer.

b

9 nos, 10/16A, SP, MCB, "C" curve type as

outgoings + 3 no.s 1M-RYB indicators / lamps

each.

Full Set as above - (For Item No.A-5) 1 Nos

5 Suply and installation of 6-way, TPN, Raw Power

Distribution Board (RPDB), flush mounted on wall,

interconnected wiring complete with earthing lugs

housing following switchgears:

(Similar to MDS / equivalent approved make)

a 1 no., 63A, TP MCB as incomer

b 18 nos, 16/25A, SP, MCB outgoing


6 Suply and installation of 4-way, TPN, AC

Distribution Board (ACDB), flush mounted on wall,

interconnected wiring complete with earthing lugs

housing following switchgears:


a 1 no., 63A, TP MCB+ELCB as incomer



7 Suply and installation of 8-way, SPN, Main UPS /

RAW Power Distribution Board ( MAIN UPSDB),

flush mounted on wall, interconnected wiring

complete with earthing lugs housing following

switchgears:


a 1 no., 40/63A, DP MCB as incomer

b2 no.s 63/40A DP MCB's + 2 nos, 16/20A, SP,

MCB's, "D" curve type as outgoings


8 Suply and installation of 8-way, SPN, Main UPS /

RAW Power Distribution Board (server room

UPSDB), flush mounted on wall, interconnected

wiring complete with earthing lugs housing

following switchgears:





9 Suply and installation of 12-way, SPN, UPS

Power Distribution Board (workstation UPSDB),

flush mounted on wall, interconnected wiring

complete with earthing lugs housing following

switchgears:

(Similar to MDS / equivalent approved make) PRICE BID CIVIL,INTERIOR EL. Page29 of 37






10 Supply & Installation of 20A, SP, MCB, box with

20A, metal clad / modular plug-socket including

power circuit of (2x4 + 1x2.5) sq. mm wires

directly taken from the relevant DB through PVC

conduits for room A/C including all necessary

hardware & accessories, etc.

8 Nos

11 Supply & Installation of 20/32A, DP, MCB, box

with 20A, metal clad plug-socket including power

circuit of (2x4 + 1x4) sq. mm FRLS copper flexible

wires directly taken from the relevant DB through

PVC conduits for termination of strong room main

electrical power supply into 20A metal clad plug

socket mounted / installed outside near strong

room entrance door alongwith 3C x 4 Sq.mm Cu.

flexible cable laid through flexible metal conduit

for connection into the strong room main switch

board / DB including all necessary hardware &

accessories, etc. (Schneider / Hager / Legrand /

Siemens / L&T make)

1 Nos

12 Supply & Installation of 20A, timer switch with 2

no.s of 20A DP MCB's alongwith suitable size

enclosure box for switching for A.C.'s, etc.

alongwith 2NO 63A 1M contactor in the same

enclosure box for controlling 2 no.s of AC power

circuit through Timer including power circuits of

(2x4 + 1x4) sq. mm FRLS copper flexible wires

directly taken from the relevant DB through PVC

conduits for room A/C's through timer & contactor

including all necessary hardware & accessories,

etc. complete as required. (Schneider / Hager /

Legrand / Siemens / L&T make)

2 Nos

13 Supply & Installation of 20A, timer switch for

signage, etc. including power circuit wiring of

(2x4 + 1x2.5 Sq.mm) wires laid through PVC

conduit directly taken from Panel

1 Nos

14 Supply & Installation of 63/40A, TPN, MCB with

box for terminating supply to AHU's, Pump

machines, etc. as required.

1 Nos

15 Supply & Installation of 63A, TPN MCB with

RYB Indicator Lamps with Enclosure for

terminating supply to UPS i/p - o/p alongwith all

necessary hardware & accessories, etc. complete

as required. (Schneider / Hager / Legrand /

Siemens / L&T make)

1 Nos

16 Supply & Installation of 63/40A, DP, MCB with box

for terminating supply to UPS i/p - o/p etc. as

required.

1 Nos




17 Lumpsum charges for arranging temporary power

supply and lighting for all the contractor at site

including the required number of tubelight fittings,

suffficient number of plug points with plug tops

and including all the necessary safety devices like

ELCB etc. to ensure SAFE & CONTINUED supply

at site.

LS

TOTAL of SECTION (A) Rs.

B CABLES / MAINS

1

Supply & Installation of 1100V grade armoured

cable having sector / circular shaped aluminium /

copper conductor PVC insulated cores, laid up,

PVC tape wrappe d inner sheathed, GI strip / wire

armoured and overall extruded PVC sheathed

confirming to IS: 1554, laid on wall / ceiling using

GI clamps & spacers as per route shown at site

and further as directed by Consultant at site in the

following sizes :-

NOTE :- All Armoured cables shall be provided

with temporary labelling at every 5mtrs & then

finally with metal indentification tags showing

the size & the location from/to the respective

Panel / DB, at both the ends.

1.13 1/2 C x 120 Sq.mm Aluminium (Main cable from

Meter Room to SFU at meter room)25 Mtrs


SFU to Main Electrical LT Panel)50 Mtrs

1.33 1/2 C x 50 Sq.mm Aluminium (Main Electrical

LT Panel to Main HVAC VTPN DB)20 Mtrs

1.4 4C x 16 Sq.mm Copper 20 Mtrs





1.9 3C x 2.5 Sq.mm Copper 10 Mtrs

### 3C x 1.5 Sq.mm Copper 5 Mtrs

###25 Sq.mm Copper flexible lead wire through

flexible PVC conduit10

Mtrs



Mtrs


flexible PVC conduit10 Mtrs

2

Supply & Installation of end termination of above

mentioned cables including compressed type

brass glands, crimping type copper lugs,

insulation tape etc. as 'required complete with

earthing of glands in following sizes


Meter Room to SFU at meter room)2 Nos


SFU to Main Electrical LT Panel)2 Nos

2.33 1/2 C x 50 Sq.mm Aluminium (Main Electrical

LT Panel to Main HVAC VTPN DB)2 Nos

2.4 4C x 16 Sq.mm Copper 4 NosPRICE BID CIVIL,INTERIOR EL. Page31 of 37



2.5 4C x 10 Sq.mm Copper 6 Nos




2.9 3C x 2.5 Sq.mm Copper 2 Nos

### 3C x 1.5 Sq.mm Copper 2 Nos



Nos



Nos



Nos

TOTAL of SECTION (B) Rs.

CLIGHTING & POWER WIRING WITH FRLS

WIRES

1

Supply & Installation of concealed point wiring

using 600v grade 1.5 sqmm copper conductor

PVC insulated wires (with proper R,Y,B color

code ) pulled through heavy gauge PVC conduits

laid concealed over false ceiling or in wall chases

or on the ceiling in case of an open ceiling

including 2.5 sqmm circuit wires from the relevant

DB and also including 2.5 sqmm green color

copper earth wire and switch plate, switches, etc.

as approved by the consultant. (Each circuit shall

not feed more than 8 points OR 800 watts as per

following configuration.)

1.1Primary light points including the cost of 5A switch

55 Nos

1.2Secondary light points looped from the above

point45 Nos

1.3

Fan Point including 120W Electronic type step

regulator, anchor fastner & 'S' type fan hook in

ceiling to suspend ceiling fan by cutting / chiesling

/ painting as required

3 Nos

1.45A plug point as primary point (UPS / RAW

Power)8 Nos

1.5Secondary 5A Plug point on switch board (UPS /

RAW Power)25 Nos

1.6Exhaust fan point consisting of 5A socket near fan

and switch on light switch board3 Nos

2

Supply & installation of 5/15A Plug Point directly

taken from DB for Pantry / geyser / zerox / printer /

fridge, etc. including 2 x 2.5 sqmm circuit wires

directly taken from the relevant DB and also

including 2.5 sqmm green color copper earth wire

all laid through PVC conduit with all necessary

hardware& accessories, etc. (UPS/Raw

PowerONLY FOUR tables served by one circiut

from DB))

10 Nos




3

Supply & Installation of point wiring for UPS or

stabilized power plug points on workstations /

table for computers using 3C X2.5 Sqmm copper

conductor PVC sheathed white color flexible

cable pulled through already laid floor raceways

and taken upto table top using PVC rigid or

flexible conduits run within wooden/metal

partitions. Each point consisting of 4 nos of 5A

, 2/3 pin sockets & 1 No., 15A Switch , wired

together forming one point. The earth wire of 3

core flexible cable to be of yellow-green color

only. (ONLY FOUR tables served by one

circiut from DB)

6 Nos

4













circiut from DB)

11 Nos

5













circiut from DB)

3 Nos

6Supply & installation of T.V. outlet point including

all necessary hardware, accessories, etc.1 Nos

7

Supply & laying of RG-6 TV cable through heavy

guage PVC conduit including all necessary

hardware, accessories, etc.

55 Rmt

TOTAL of SECTION (C) Rs.

D TRENCHING / FLOOR -RACEWAYS:

1

Supply and installation of extruded aluminium

raceway of 1.6 mm minimum thickness and

complete with all clamping or Fixing accessories

& Interconnecting earthing strip / wire for earthing

continuity complete with all necessary hardware &

accessories, etc.

1.1 100 mm X 40 mm 8 Mtrs

1.2 80 mm X 40 mm 8 MtrsPRICE BID CIVIL,INTERIOR EL. Page33 of 37



1.3 60 mm X 40 mm 52 Mtrs

2Supply & Installation of 32mm heavy guage PVC

conduit (FRLS)150 Mtrs

3Supply & Installation of 25mm heavy guage PVC

conduit (FRLS)120 Mtrs

4

Supply & Installation of floor junction boxes with

top cover for above raceways, of size 250mm x

250mm x 50mm x 2.5mm thick , fabricated out

of M.S. sheetsfully powder coated with removable

screwed cover plates on all four sides for blocking

the entry. One side cover plate having 4 nos. 1'

dia knockouts for flexible conduit outlets as per

the requirement. All the junction boxes to be (with

stud) 'properly earth - bonded with the raceways

pipe using 12 SWG Copper bare wire as directed

at site.

10 Nos

5











at site.

4 Nos

6











at site.

1 Nos

7











at site.

1 Nos

8

Chesling of flooring including tile cutting &

recementing the flooring surface uniformly for

underfloor trenching as per required sizes along

with necessary hardware & acessories, etc.

100 Mtrs

TOTAL of SECTION (D) Rs.




E EARTHING

1

Supply & Installation of earth pit comprising of

600mm x 600mm x 3mm thick copper plate buried

at a minimum depth of 2.5 meter including

necessary materials like charcoal,salt etc as

required conforming to BIS standards having brick

masonary chamber with hinged cover and

watering arrangement. (Earth Pit - 1) (Dedicated

UPS Earthing Pit)

1 Nos

2

Supply & Installation of earth pit comprising of

600mm x 600mm x 3mm thick GI plate buried at a

minimum depth of 2.5 meter including necessary

materials like charcoal,salt etc as required

conforming to BIS standards having brick

masonary chamber with hinged cover and

watering arrangement. (Earth Pit - 2) (Electrical

Earthing Pit)

1 Nos

3

Supply & Installation of copper /GI earthing

wires/strips in following sizes including all

necessary hardware & accessories, etc.:-

3.1

8 SWG copper bare wire (From Main Electrical

Earthing Busbar to LDB, RPDB, ACPDB, UPSDB,

A.C. m/c's i/p MCB boxes etc.)

250 Mtrs

3.2

12 SWG copper bare wire (From Main Electrical

Earthing Busbar to A.C. m/c's i/p MCB boxes,

etc.)

50 Mtrs

3.3 25 x 3 Cu. Strip (Electrical Earthing) 5 Mtrs

3.4 8 SWG GI bare wire (External Lighting Earthing) 5 Mtrs

3.5 12 SWG GI bare wire (External Lighting Earthing) 5 Mtrs

3.6

32 x 6 GI. Strip (Electrical Earthing) (From

Electrical Earthing Pit to Main Electrical Earthing

Busbar)

69 Mtrs

3.71C x 16 sq.mm flexible Cu. Wire through heavy

guage PVC conduit (Dedicated UPS Earthing)5 Mtrs

3.81C x 10 sq.mm flexible Cu. Wire through heavy

guage PVC conduit (Dedicated UPS Earthing)70 Mtrs

4

Supply & Installation of (32 x 6) mm of 300mm

length Cu. earthing bus with enclouser with

sufficient no. of hole for connecting earthing wire

with necessary accessories, hardware, etc.

1 Nos

5

Supply & Installation of (32 x 6) mm of 300mm

length GI. earthing bus with enclouser with

sufficient no. of hole for connecting earthing wire

with necessary accessories, hardware, etc.

1 Nos

TOTAL of SECTION (E) Rs.

F VOICE NETWORKING (38V)

1Supply & laying of 2-pair telephone wire through

already laid pvc conduits.450 Rmt.

2

Supply & installation of RJ-11 1M telephone

socket outlet point including PVC back box

alongwith necessary hardware & accessories, etc.20 Nos.




3Supply & Installation of 50 pair MDF with Krone

module 1 Nos.

4 Supply & Installation of Data point outlet PVC back box20 Nos.

5Termination, Testing and Documentation of

Telephone Points20 Nos.

6Supply & Laying of 10 pair telephone cable

through PVC conduit30 Rmt

TOTAL of SECTION (F) Rs.

G MUSIC CUM PUBLIC ADDRESS SYSTEM

1

Supply, Installation, Testing, Commisioning of

point wiring for music - cum PA system

comprising of 2x 1.0 sqmm stranded , copper

conductor , flexible PVC insulated and PVC

Sheathed wire pulled through 20 mm dia. PVC

heavy gauge conduits and looped from one

speaker to other and to the volume control switch

wherever applicable and finally terminated an

tagblock

7 Nos

2

Supply, Installation, Testing, Commisioning of of

6" dia music speakers to be flushed mounted on

false ceiling similer to BOSCH / approved

equivalent make.All speakers to be equipped with

matching transformer for direct connection to

100v output line

7 Nos

3

Supply, Installation, Testing, Commisioning of

volume control - cum - ON - OFF switch flush

mounted on wall along with other electrical

switches .The size and plate of the regulating

knob should match with other switches nearby.

2 Nos

4Supply, Installation & Testing of Microphone of

Ahuja / approved equivalent make1 Nos

5

Supply, Installation & Testing of Amplifier for

Public Address System suitable to operate on

230V A.C. / 12V D.C. supply with two low

impedence microphone input, tone control,

protection circuit complete for the speakers output

lines.(Ahuja / approved equivalent make)

1 Nos

6

Supply, Installation & Testing of Music system

(but cost of the player not more than Rs. 6500/-),

the system to be of Philips/Sony or equivalent

approved make. The system to comprise of MP3

compatible discs, FM radio, Audio casette, etc.

complete with all neccessary hardware &

accessories, etc.

1 Nos

TOTAL of SECTION (G) Rs.

HBUY - BACK OF REMOVED ELECTRICAL

MATERIAL




1

Removing, storing & Buy -Back of all removed un-

useable electrical materials including wires, pvc

conduits, casing caping, switchs, sockets, tube

lights, light fittngs, MCB's, DB's, Panel, etc. as per

instructions given & approved by the Client /

Branch Manager / Consultant at site. Contractor

shall take approval & official permission before

dispatching the buy-back material from site. (Item

to be quoted as one JOB on Lumpsum basis.)

1 LS

NOTE :- Client reserves final authority / right to

allow buy back's scope into contractor's scope of

work or not. And contractor shall take final

approval from Bank's Branch Manager / Engineer

for buy-back's final approval before taking away

buy-back material from the site.

TOTAL Electrical works Rs.

No. Description Qty. Unit Rate Amount

ATOTAL OF INTERIOR FIXED ASSET

WORKSRs.

B TOTAL OF FURNITURE WORKS Rs.

C TOTAL OF CIVIL WORKS Rs.

D TOTAL OF ELECTRICAL WORKS Rs.

TOTAL COST OF INTERIOR RENOVATION

& FURNISHING AND ELECTRICAL

WORKS (A+B+C+D)

Rs.

GRAND TOTAL

(GST will be paid extra as per actual )

SUMMARY STATEMENT


INTERIOR RENOVATION BOQ INTERIOR · PDF fileinterior renovation boq shetgiri and associates...

Documents

Transcript of INTERIOR RENOVATION BOQ INTERIOR · PDF fileinterior renovation boq shetgiri and associates...