Interest and Engagement Metrics with Certain and Marketo › webhelp › certain5.9 › ... ·...
Transcript of Interest and Engagement Metrics with Certain and Marketo › webhelp › certain5.9 › ... ·...
Interest & Engagement Metrics (with Marketo) | 1
©2015 Certain, Inc. All rights protected and reserved.
Interest and Engagement Metrics
(using Certain and Marketo)
This document describes how you can use event data in Certain to create a more complete picture of
your prospects and leads. You can send integrated uploads of attendees’ engagement statistics and
interest metrics from Certain to Marketo. (The information is also available in reports.)
This added level of event intelligence uses Connectors in Certain, to which there is a separate guide, but
you shouldn’t need to refer to that to set up and run the Connectors jobs described here. Since those
jobs are integrations with Marketo, you do need to be using Marketo in your organization, and the
Marketo setup steps starting on page 12 do assume a good working knowledge of Marketo.
Contents
What are Jobs? ...................................................................................................................................................... 2
Job 1: Upload Engagement Metrics to Marketo ..................................................................................................... 2
What is Uploaded from Certain to Marketo? ......................................................................................................... 2
What Certain Modules does an Event Require? ..................................................................................................... 3
Setup in Marketo ................................................................................................................................................... 4 1. Deploy Custom Engagement Object .............................................................................................................. 5 2. Populate the attendeeID field ....................................................................................................................... 5 3. Behavioral Score ............................................................................................................................................ 6 4. Create Campaigns ......................................................................................................................................... 6 5. Campaign Smart List ...................................................................................................................................... 7 6. Define Trigger or Filter Criteria...................................................................................................................... 7 7. Define Campaign Workflow Steps. ................................................................................................................ 8 8. Activate Trigger Campaign or Schedule Run. ................................................................................................ 9
Running the Certain job: Upload Engagement Metrics to Marketo ........................................................................ 9
Job 2: Upload Interest Metrics to Marketo .......................................................................................................... 10
What is Uploaded from Certain to Marketo? ....................................................................................................... 10 Registration Criteria ........................................................................................................................................ 11
Setup in Certain ................................................................................................................................................... 11 1. Set Up Account-Level “Tags” ....................................................................................................................... 11 2. Assign Tags and Points to Agenda Items or Sessions ................................................................................. 11
Setup in Marketo ................................................................................................................................................. 12 1. Deploy Custom Object ................................................................................................................................. 12 2. Populate the attendeeID field ..................................................................................................................... 12 3. Create Interest Score Fields......................................................................................................................... 13 4. Create Event-Level Campaigns .................................................................................................................... 14 5. Define Campaign Smart List ........................................................................................................................ 14 6. Define Campaign Workflow ........................................................................................................................ 14
Running the Certain job: Upload Interest Metrics to Marketo ............................................................................. 15 Example Interest Metrics ................................................................................................................................ 16
Suggested Best Practices...................................................................................................................................... 18 Clone Event with Engagement/Interest Scoring.............................................................................................. 18
Reports ................................................................................................................................................................ 19
Interest & Engagement Metrics (with Marketo) | 2
©2015 Certain, Inc. All rights protected and reserved.
What are Jobs?
In Certain, as explained in the separate Connectors Guide, each "job" is a pre-defined program,
developed using the Certain API, to connect to a target application – Marketo is the target application in
this document. A job runs in the background as a batch job, drawing data from that application into
Certain, and/or sending data from Certain to that application.
For purposes of the integration described in this document, there are two jobs which concern us here,
both of which you would normally run after an event:
1. “Upload Engagement Metrics to Marketo”. This job uploads statistics about attendees’ sessions and
appointments from Certain to Marketo, where they inform behavioral scoring. See the next section,
on this page.
2. “Upload Interest Metrics to Marketo”. This job uploads metrics for attendees’ interests, based on
the sessions for which they registered. See page 10.
Job 1: Upload Engagement Metrics to Marketo
What is Uploaded from Certain to Marketo?
The Upload Engagement Metrics to Marketo job in Certain uploads the statistics listed below.
Metric Attendee-Based Calculations Example
1 Number of Sessions
Registered Sessions in “registered” + “attended” 20 Sessions Registered
2 Number of Sessions
Attended Sessions in “attended” 9 Sessions Attended
3 Number of Sessions
Rated Count of sessions in any status with rating 5
4 Average Session
Rating Sum of ratings / count of sessions rated 4.5 (rounded up to 5)
5
Number of SSA
Count of appointments in which registrant can be a
‘source' or ‘target’ attendee and Appointment
Type = REG and Source = SDA
11 Self-Scheduled
Appointments
6 Number of Matched
Appointments
Count of appointments in which registrant can be a
‘source' or ‘target’ attendee and Appointment
Type = REG and Source = AME
15 Matched
Appointments
Interest & Engagement Metrics (with Marketo) | 3
©2015 Certain, Inc. All rights protected and reserved.
Metric Attendee-Based Calculations Example
7 Total Number of
Appointments Count of SSA + Matched 26 Total Appointments
8 Number of
Appointments
Attended
Count of appointments Type = REG and ‘source’ =
SSA or AME or ADMIN where source or target does
not have rating = "No Show"
13 Appointments
Attended
9 Number of
Appointments Rated
Count of appointments Type = REG and ‘source’ =
SSA or AME or ADMIN where Attendee has rated
(i.e. 1 - 5) appointment
6 Appointments Rated
10 Average Appointment
Rating Given
Sum of appointments rated / count of
appointments rated 3.4 (rounded down to 3)
11 Average Appointment
Rating Received
Sum of rating given by ‘other' attendees / count of
appointments where ‘other’ has given 1 - 5 rating 2.7 (rounded up to 3)
What Certain Modules does an Event Require?
Some of the statistics listed above require one or more of the following modules to be enabled for the
event (in Plan > Configure > Options), as noted in the table below.
Agenda Item Management (sub-module of the Agenda Module) or Speaker and Session Management module
Appointments module, with one or both of these sub-modules: o Appointment Matching and/or o SSA (Self-Scheduled Appointments)
Certain Mobile or Event Views
Interest & Engagement Metrics (with Marketo) | 4
©2015 Certain, Inc. All rights protected and reserved.
Engagement Metric Modules Required in Event
1. Number of Sessions Registered Agenda Item Management or Speaker and Session Management.
2. Number of Sessions Attended Agenda Item Management or Speaker and Session Management.
3. Average Session Rating Event Views and/or Certain Mobile
4. Number of SSA Appointments SSA (Self-Scheduled Appointments)
5. Number of Matched Appointments Appointment Matching
6. Number of Appointments Scheduled (= total, i.e. both Matched and SSA)
Appointment Matching and/or SSA
7. Number of Appointments Attended (= total, i.e. both Matched and SSA)
Appointment Matching and/or SSA
8. Average Appointment Rating Received Appointment Matching and/or SSA and Certain Mobile or Event Views
9. Average Appointment Rating Given Appointment Matching and/or SSA and Certain Mobile or Event Views
If an event does not have one of those modules enabled, the only effect on the Upload Engagement
Metrics to Marketo job is that those particular statistics are not uploaded; the others still are. So, for
example, if you aren’t using the Appointments module, Session statistics are still uploaded when you
run the job.
Setup in Marketo
The following steps assume you are an experienced user of Marketo.
1. Deploy Custom Engagement Object
2. Populate the attendeeID field
3. Set up behavioral score field in Marketo
4. Create Campaigns
5. Campaign Smart List
6. Define Trigger or Filter Criteria
7. Define campaign workflow steps
8. Activate trigger campaign or schedule run
Interest & Engagement Metrics (with Marketo) | 5
©2015 Certain, Inc. All rights protected and reserved.
1. DEPLOY CUSTOM ENGAGEMENT OBJECT Contact your account rep at Marketo to request setup instructions for custom
CertainEngagementMetrics and CertainInterestPoints objects. (The latter is needed for the Upload
Interest Metrics job, which is described on page 10, below.)
Complete that form and email it to [email protected], to get the objects set up in your Marketo
instance.
2. POPULATE THE attendeeID FIELD This step is required for uploading engagement metrics, as described here, and interest metrics as
described on page 10, below.
The attendeeID field in Marketo must have the same value as the Marketo LeadID field in Certain. You
can achieve this by setting up the following campaign in Marketo:
Smart List setup
Flow Setup
Interest & Engagement Metrics (with Marketo) | 6
©2015 Certain, Inc. All rights protected and reserved.
3. BEHAVIORAL SCORE Set up a Behavioral Score field in Marketo.
4. CREATE CAMPAIGNS Create campaigns under event program for scoring event engagements.
Interest & Engagement Metrics (with Marketo) | 7
©2015 Certain, Inc. All rights protected and reserved.
5. CAMPAIGN SMART LIST Campaign smart list. Look up criteria by searching for “certain”.
6. DEFINE TRIGGER OR FILTER CRITERIA Define trigger or filter criteria, which can be based on any value.
Use range to define criteria (e.g. number of appointments is greater than x).
Must define program name.
Interest & Engagement Metrics (with Marketo) | 8
©2015 Certain, Inc. All rights protected and reserved.
7. DEFINE CAMPAIGN WORKFLOW STEPS. Translate engagement into a behavioral score value
Interest & Engagement Metrics (with Marketo) | 9
©2015 Certain, Inc. All rights protected and reserved.
8. ACTIVATE TRIGGER CAMPAIGN OR SCHEDULE RUN. Best Practice: Schedule run once after event.
For triggered run, ensure campaign is set to run only once per lead
Running the Certain job:
Upload Engagement Metrics to Marketo
Run or preschedule the Upload Engagement Metrics to
Marketo job in Certain, after the event.
1. In the event, click Plan on the Top Navigation
Bar, click Configure on the Plan menu, and then
click Connectors page link in the Left Navigation
Panel.
Interest & Engagement Metrics (with Marketo) | 10
©2015 Certain, Inc. All rights protected and reserved.
2. Click New Event Job.
The New Job Configuration page opens.
3. Enter job details and your Marketo credentials in the usual way:
a. Application – Select Marketo
b. Job Name – Select the Upload Engagement Metrics to Marketo job
c. Job Description – Enter a description of your choice. (The default is the Job Name.)
d. Optionally, enter an email address to be sent details if the job fails.
e. Select Run Once, or Schedule Recurring Job* (with parameters to run it once at a later
date and time), and click Submit Job.
*(See the separate Connectors guide for full details of scheduling jobs.)
Job 2: Upload Interest Metrics to Marketo
Upload interest-based metrics per account-level tag assigned to agenda items (or sessions if Speaker and
Session Management is enabled) for which the attendee is registered in the event, using the numbers of
points assigned to the agenda items / sessions.
What is Uploaded from Certain to Marketo?
The Upload Engagement Metrics to Marketo job in Certain sends the following information to the
CertainInterestPoints custom object in Marketo (see Marketo Setup, step 1, on page 12). It does so for
all registrations in the event that meet the registration criteria listed below.
Certain Field Marketo Field
Interest & Engagement Metrics (with Marketo) | 11
©2015 Certain, Inc. All rights protected and reserved.
Certain Field Marketo Field
1 Event Name Program Name
2 Tag Name Interest
3 Agenda Item Points or
Session Points Interest Points
Registration Criteria
Information is uploaded for registrations that meet the following criteria:
• Registration is marked as Complete
• Registration is Active (not deleted)
• Registration has an Accepted or Pending registration status (it is not cancelled or denied)
• Agenda Item or session status is one you select when running the job: Registered and/or Attended.
“Tags” and “points” are explained next.
Setup in Certain
1. SET UP ACCOUNT-LEVEL “TAGS” An Administrator-level user needs to have set up “Tags” for your account. They only need to do that
once, so that the tags can be applied to agenda items (or sessions if Speaker and Session Management is
enabled) in any events. (They can of course add new tags whenever needed.)
The administrator sets up tags by going to Account Settings > Administration > Tags. Each tag consists
of just its name, which might be one of your products, for instance, or any another area of interest you
want to track.
2. ASSIGN TAGS AND POINTS TO AGENDA ITEMS OR SESSIONS When setting up agenda items (in Plan > Event Setup > Agenda) or sessions (in Manage > Session
Management), you can assign tags and points to each one for tracking purposes.
Tags – Select any of the tags set up for the current account. Start typing for matching tags to be
displayed incrementally. You can select multiple tags per agenda item.
Points – Enter the number of points to be used as the measurement of interest level for an attendee
registering for this agenda item or session.
Some examples of calculations for attendees are included under the final step, running the job: see page
16.
Interest & Engagement Metrics (with Marketo) | 12
©2015 Certain, Inc. All rights protected and reserved.
Setup in Marketo
The following steps assume you are an experienced user of Marketo.
1. Deploy Custom Object
2. Populate the “attendeeID” Field
3. Create Interest Score Fields
4. Create Event-Level Campaigns
5. Define Campaign Smart List
6. Define Campaign Workflow
See brief descriptions and illustrations below.
1. DEPLOY CUSTOM OBJECT As described in step 1 of the Marketo setup for the Upload Engagement Metrics job above, you should
already have arranged for a custom CertainInterestPoints object to have been set up in your instance of
Marketo. See page 5, above.
2. POPULATE THE attendeeID FIELD And as described in step 2 of the Marketo setup for the Upload Engagement Metrics job above, you
should already have set up a Marketo campaign to ensure that the attendeeID field in Marketo has the
same value as the Marketo LeadID field in Certain. See page 5, above.
Interest & Engagement Metrics (with Marketo) | 13
©2015 Certain, Inc. All rights protected and reserved.
3. CREATE INTEREST SCORE FIELDS Add product interest scoring fields and campaigns for each product/area of interest.
Define as a “score” type field.
Interest & Engagement Metrics (with Marketo) | 14
©2015 Certain, Inc. All rights protected and reserved.
4. CREATE EVENT-LEVEL CAMPAIGNS Create interest scoring campaign under the event program in Marketo.
5. DEFINE CAMPAIGN SMART LIST Define trigger or filter criteria in smart-list.
Use range to define criteria (e.g. mobile interest score is greater than x).
Must define program name.
6. DEFINE CAMPAIGN WORKFLOW Translate into Interest-score.
Can also include any follow-up workflow steps.
Interest & Engagement Metrics (with Marketo) | 15
©2015 Certain, Inc. All rights protected and reserved.
Repeat for additional interests.
Running the Certain job:
Upload Interest Metrics to Marketo
Run or preschedule the Upload Interest Metrics to Marketo job in Certain, after the event.
1. In the event, click Plan on the Top Navigation
Bar, click Configure on the Plan menu, and then
click the Connectors page link in the Left
Navigation Panel.
2. Click New Event Job.
The New Job Configuration page opens; see
screenshot overleaf.
Interest & Engagement Metrics (with Marketo) | 16
©2015 Certain, Inc. All rights protected and reserved.
3. Enter job details and your Marketo credentials in the usual way:
a. Application – Select Marketo
b. Job Name – Select the Upload Interest Metrics to Marketo job
c. Job Description – Enter a description of your choice. (The default is the Job Name.)
d. Agenda Status - Select “REGISTERED” and/or “ATTENDED”. Only agenda items (or
sessions if Speaker and Session Management is enabled for the event) of the status(es)
you select will be included in the calculation.
e. Optionally, enter an email address to be sent details if the job fails.
f. Select Run Once, or Schedule Recurring Job* (with parameters to run it once at a later
date and time), and click Submit Job.
*(See the separate Connectors guide for full details of scheduling jobs.)
EXAMPLE INTEREST METRICS For example:
You have tags set up in your account for "Mobile" and for "Appointments".
In your event, you assign both tags to session A, and only the "Mobile" tag to session B.
You assign 5 points to session A (an introductory overview), and 10 to session B (a specialized
workshop).
John Citizen registers for both sessions.
Interest & Engagement Metrics (with Marketo) | 17
©2015 Certain, Inc. All rights protected and reserved.
You include “Registered” as an Agenda Status when submitting the job.
This job uploads the following interest metrics for John for this event
"Mobile" = 15 (calculation: 5 points for session A + 10 for session B)
"Appointments" = 5 (calculation: 5 points for session A)
Suggested Best Practices
See overleaf for a list of some suggested best practices.
Interest & Engagement Metrics (with Marketo) | 18
©2015 Certain, Inc. All rights protected and reserved.
Suggested Best Practices
Create Interest-based scores for product lines and other important areas of interest. (For example,
role-based or content-type interests.)
Embed Marketo web tracking code on mobile, event site, and event view pages to indicate
interest/engagement.
Use thresholds values to differentiate levels of interest or engagement. For example, high, medium,
low.
Create a template event program in Marketo with a scoring model, to clone for future events. (See
screenshot below.)
Run the two Certain integration jobs once after the event is over, to ensure all engagement and
interest statistics are collected.
Use trigger campaigns in Marketo to auto-run engagement/interest workflows once the Certain jobs
have run.
For reference, you may find this glossary of Marketo terminology useful:
http://www.marketo.com/marketing-glossary/
CLONE EVENT WITH ENGAGEMENT/INTEREST SCORING As recommended above, build out the master event scoring model just once in Marketo.
Clone and update that for future events.
Interest & Engagement Metrics (with Marketo) | 19
©2015 Certain, Inc. All rights protected and reserved.
Reports
You can run reports in Certain that provide the same information as these jobs, but as “information
only” on screen (or as an Excel export), without connecting to Marketo or providing the benefits of that
integration.
Go to the Reports/Analyze page in an event, where you will find:
Interest and Engagement Reports
Engagement Metrics Report
Interest Metrics Report