Intercore - Cortech - all rigs - EN
Transcript of Intercore - Cortech - all rigs - EN
CSD 500CDiamond Drill Rig
The CSD 500C man-portable drill rig is specially designed for diamond drilling in poor-access locations. Its modularized design features extreme convenience to break down into light pieces which may be hand-carried to the job site. This rig consists of two diesel power units, a hydraulic system, control panel, mast, main winch, wire-line winch, drill head, feed system, foot clamps, etc. The robust structure and precise control system ensures a high penetration rate and outstanding reliability.
The following points highlight the CSD 500C’s major features:1. All-hydraulic Drill HeadThe drill head is driven by two hydraulic pumps powered by
two diesel engines. The drill head is propelled by a variable speed motor, with a low- and high-speed feed system.2. Easy Assembly/DisassemblyThe power unit, hydraulic tank, control panel and drill system are designed as separated units. Each unit is lightweight to ensure easy transportation. The rig configuration can be adjusted according to particular pad sites, with hole angle capacity of between -45O to -90O.3. Wide-Range of ApplicabilityBesides working extremely well in diamond wire-line drilling, this rig also meets various requirements of core drilling.
CSD 500C Specifications
DrillCapacity
Hydraulic System
PowerSystem
DrillHead
Main Winch
Wire-lineWinch
Mast
FootClamp
TransportDimensions
Max Unit Weight After Disassembly
Drill Rod DiameterBNH
Drill Depth600 m400 m200 m
Pressure:Cooling:
Model:Power:Engine RPM:
Max Torque:Max Rotation:Feed Stroke:Max Inside Diameter:Max Pull:Max Push:
Max Pull:Pull Speed:Rope Diameter:Rope Length:
Max Pull:Pull Speed:Rope Diameter:Rope Length:
Length:Drill Angle:
Drill Rod: B, N, H
Main Frame Unit:Power Unit:Operation Unit:
3,450 x 1,800 x 1,500 mm1,280 x 680 x 980 mm1,030 x 655 x 1,135 mm
280 kg
22 MPaAir Cooled
2x Yanmar 4TNV 84T35.5 kW (each)2,800 rpm
1,120 Nm1,100 rpm1,800 mm97 mm70 kN35 kN
30 kN26 m/min14 mm30 m
11 kN (bare drum)110 m/min5 mm500 m
6.2 m450 - 900
Intercore PerforacionesJalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302Fax: +52 (33) 3686 8128
[email protected] www.intercore.com.mx
CSD 1300GDiamond Drill Rig
The CSD 1300G drill rig is specially designed for surface diamond
drilling under wide-ranging conditions. This track-mounted drill
rig facilitates convenient moves in challenging terrain.
The durable structure and robust power supply ensures a high
penetration rate and outstanding reliability. The up-to-date design
of the hydraulic system makes the CSD 1300G one of the most
favored rig models around the world.
The following points highlight the CSD 1300G’s major features:1. The pilot system improves the efficiency of the hydraulic system.
2. Four-speed gear box, providing a free combination of torque
and spindle speed.
3. 117 mm chuck diameter, suitable for B- to P-sized rods.
4. 3.5 m drill head stroke facilitating the use of 3 m rods.
5. Dump-mast guarantees perfect stability during drilling.
6. Mast folding/stretching structure facilitates rig set up.
7. Independent hydraulic leveling jacks.
8. Convenient control of feed pressure.
9. Floating head enables breaking rods without damage.
10. Pre-installed hydraulic circuit check points and master
hydraulic gauge ensures easy diagnosis of the hydraulic system,
plus front-opening design of the control panel makes repairs easy
& convenient.
11. Control panel gauges provide real-time drill data.
12. Mud-pump and mixer are powered by the rig’s hydraulic
system, controlled independently from the rig’s control panel.
13. Top-grade hydraulic pumps and motors of European/US origin.
14. Powerful main winch of US origin.
15. Self-spooling wire-line winch.
CSD 1300G Specifications
DrillCapacity
Hydraulic System
PowerSystem
DrillHead
Main Winch
Wire-lineWinch
Mast
FootClamp
TravelCapacity
TransportDimensions
TotalWeight
Drill Rod DiameterBNHP
Drill Depth1,300 m1,000 m700 m400 m
Pressure:Cooling:
Model:Type:Power:Engine RPM:
Max Torque:Max Rotation:Feed Stroke:Max Inside Diameter:Max Pull:Max Push:
Max Pull:Pull Speed:Rope Diameter:Rope Length:
Max Pull:Pull Speed:Rope Diameter:Rope Length:
Length:Drill Angle:Dump Length:
Max Permissible Gradient:Max Travel Speed:
300
2 km/h
Drill Rod: B, N, H, P
L x W x H: 5,430 x 2,300 x 2,600 mm
10.3 t
26 MPaAir Cooled
Cummins 6BTA 5.9 - C180Turbo Charged132 kW2,500 rpm
4,257 Nm1,182 rpm3,500 mm117 mm120 kN50 kN
68 kNLow: 28 m/min High: 67 m/min16 mm30 m
11 kN (bare drum)120 m/min6.6 mm1,000 m
10 m450 - 900
1.4 m
Intercore PerforacionesJalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302Fax: +52 (33) 3686 8128
[email protected] www.intercore.com.mx
CSD 1800XDiamond Drill Rig
The CSD 1800X diamond drill rig is specially designed for deep
diamond drilling with ultimate mobility in mind. This
track-mounted rig facilitates moving around with great
convenience in any terrain. The robust structure plus strong
power supply ensures a high penetration rate and outstanding
reliability. The rig is fully hydraulic, including virtually all
operational functions prevalent on the latest model drill rigs
available on the world market.
The following points highlight the rig’s major features:1. Four-speed gear box, providing a free combination of torque and
spindle speed.
2. 117 mm chuck diameter, suitable for B- to P-sized rods.
3. 3.5 m drill head stroke facilitating the use of 3 m rods.
4. Dump-mast guarantees perfect stability during drilling.
5. Independent hydraulic leveling jacks.
6. Convenient control of feed pressure.
7. Standardized parts and components provide efficient repair
and maintenance.
8. Control panel gauges provide real-time drill data.
9. Mud-pump and mixer are powered by the rig’s hydraulic
system, controlled independently from the rig’s control panel.
10. Top-grade hydraulic pumps and motors of European origin.
11. Experienced engineers plus adequate spare parts ready to
provide full service.
CSD 1800X Specifications
DrillCapacity
Hydraulic System
PowerSystem
DrillHead
Main Winch
Wire-lineWinch
Mast
FootClamp
TravelCapacity
TransportDimensions
TotalWeight
Drill Rod DiameterBNHP
Drill Depth2,000 m1,700 m1,200 m700 m
Pressure:Cooling:
Model:Type:Power:Engine RPM:
Max Torque:Max Rotation:Feed Stroke:Max Inside Diameter:Max Pull:Max Push:
Max Pull:Pull Speed:Rope Diameter:Rope Length:
Max Pull:Pull Speed:Rope Diameter:Rope Length:
Length:Drill Angle:Dump Length:
Max Permissible Gradient:Max Travel Speed:
300
2 km/h
Drill Rod: B, N, H, P
L x W x H: 5,250 x 2,320 x 2,600 mm
11 t
28 MPaAir Cooled
Cummins 6CTA 8.3Turbo Charged179 kW2,200 rpm
5,500 Nm1,200 rpm3,500 mm117 mm189 kN50 kN
135 kN40 m/min ( Low), 80 m/min (High)22 mm35 m
11 kN (bare drum)120 m/min6.6 mm1,500 m
10 m450 - 900
1.1 m
Intercore PerforacionesJalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302Fax: +52 (33) 3686 8128
[email protected] www.intercore.com.mx
CSD 1800ADiamond Drill Rig
The CSD 1800A core drill rig is specially designed for deep diamond drilling with ultimate mobility in mind. This track-mounted rig facilitates moving around with great convenience in any terrain. The robust structure plus strong power supply ensures a high penetration rate and outstanding reliability. The rig is fully hydraulic, including virtually all operational functions prevalent on the latest model drill rigs available on the world market.
The following points highlight the CSD 1800A’s major features:1. Four-speed gear box, providing a free combination of torque and spindle speed.2. 117 mm chuck diameter, suitable for B- to P-sized rods.3. 3.5 m drill head stroke facilitating the use of 3 m rods.4. Dump-mast guarantees perfect stability during drilling.5. Independent hydraulic leveling jacks.6. Convenient control of feed pressure.
7. Standardized parts and components provide efficient repair and maintenance.8. Control panel gauges provide real-time drill data.9. Mud-pump and mixer are powered by the rig’s hydraulic system, controlled independently from the rig’s control panel.10. Top-grade hydraulic pumps and motors of European origin.11. Experienced engineers plus adequate spare parts ready to provide full service.12. 9 m rod pull and sub-vertical storing capacity.13. Drill head slide reduces drill helper’s labor intensity.14. The automatic mast “up & down system” reduces auxiliary work time and creates a superior rig structure.15. The rod collection support system has a capacity of 200, 9 m N rods stored sub-vertically creating a more efficient and safe drilling environment.16. Independent hydraulic cooling system. 17. The rig can be track- or truck-mounted.
CSD 1800A Specifications
DrillCapacity
Hydraulic System
PowerSystem
DrillHead
Main Winch
Wire-lineWinch
Mast
FootClamp
TravelCapacity
TransportDimensions
TotalWeight
Drill Rod DiameterBNHP
Drill Depth2,000 m1,700 m1,200 m700 m
Pressure:Cooling:
Model:Type:Power:Engine RPM:
Max Torque:Max Rotation:Feed Stroke:Max Inside Diameter:Max Pull:Max Push:
Max Pull:Pull Speed:Rope Diameter:Rope Length:
Max Pull:Pull Speed:Rope Diameter:Rope Length:
Length:Drill Angle:Dump Length:
Max Permissible Gradient:Max Travel Speed:
300
2 km/h
Drill Rod: B, N, H, P
L x W x H: 6,550 x 2,320 x 2,720 mm
14 t
28 MPaAir Cooled
Cummins 6CTA 8.3Turbo Charged179 kW2,200 rpm
5,500 Nm1,200 rpm3,500 mm117 mm189 kN50 kN
135 kNLow: 40 m/min High: 80 m/min22 mm41 m
11 kN(bare drum)110 m/min6.6 mm1,500 m
13 m450 - 900
1.1 m
Intercore PerforacionesJalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302Fax: +52 (33) 3686 8128
[email protected] www.intercore.com.mx
CSD 3000Diamond Drill Rig
The CSD 3000 core drill rig is specially designed for deep-hole diamond drilling. The robust structure plus strong power supply ensures a high penetration rate and outstanding reliability. The rig is fully hydraulic, including virtually all operational functions prevalent on the latest model drill rigs available on the world market.
The following points highlight the CSD 3000’s major features:1. Combination of international advanced rig design and drill background in China. 2. Four-speed gear box, providing a free combination of torque and spindle speed.
3. 117 mm chuck diameter, suitable for B- to P-sized rods.4. Four independent hydraulic jacks guarantee a secure drill platform.5. Regardless of traditional drilling pressure control, the theory of balance guarantees precise drilling pressure.6. Drill head slide reduces drill helper’s labor intensity.7. The automatic mast “up & down system” reduces auxiliary work time and creates a superior rig structure. 8. Independent hydraulic cooling system.9. The rig can be track- or truck-mounted.
CSD 3000 Specifications
DrillCapacity
Hydraulic System
PowerSystem
DrillHead
Main Winch
Wire-lineWinch
Mast
FootClamp
TravelCapacity
TransportDimensions
TotalWeight
Drill Rod DiameterBNHP
Drill Depth3,000 m2,300 m1,600 m1,050 m
Pressure:Cooling:
Model:Type:Power:Engine RPM:
Max Torque:Max Rotation:Feed Stroke:Max Inside Diameter:Max Pull:Max Push:
Max Pull:Pull Speed:Rope Diameter:Rope Length:
Max Pull:Pull Speed:Rope Diameter:Rope Length:
Length:Drill Angle:Dump Length:
Max Permissible Gradient:Max Travel Speed:
300
2 km/h
Drill Rod: B, N, H, P
L x W x H: 11,240 x 2,310 x 3,330 mm
23.5 t
28 MPaAir Cooled
Cummins 6LTAA 8.9 - C325Turbo Charged239 kW2,200 rpm
8,170 Nm1,250 rpm3,450 mm117 mm250 kN110 kN
181.44 kNLow: 33 m/min High: 70 m/min24 mm41 m
18 kN (bare drum)150 m/min6.6 mm2,500 m
11.2 - 13.7 m450 - 900
1.4 m
Intercore PerforacionesJalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302Fax: +52 (33) 3686 8128
[email protected] www.intercore.com.mx
CKD 600C Underground Core Drill Rig (wheel-mounted)
(CKD600C Series)
The CKD 600C underground diamond drill rig (wheel-mounted) is specifically designed for underground drilling, and is capable of diamond drilling as well as other advanced drill functions. The whole structure can be divided into three units: the control panel, rig body and power unit. The rig body includes rotatable base, sliding mast, head rotation and feed system, wire-line winch and foot clamps; the power unit includes electromotor, electric control box and hydraulic system. In addition, a mud pump can be equipped to meet a client’s special needs. The CKD 600C underground core drill rig is an all-hydraulic system which features high-efficiency drilling, ease of operation, precise control, and uncomplicated, rapid transport between holes.
The following points highlight the CKD 600C’s major features:1. Combination of advanced international rig design and drill background in China.2. Underground drilling at any angle (-90O to +90O).3. Capable of high-efficiency diamond drilling with self-spooling wire-line winch.4. Adjustable speed head motor (0 - 1,430 rpm).5. Duel pump hydraulic system, utilizing the newest load sensitive technology. The main hydraulic pump features power conservation, increasing the rig’s efficiency. 6. Featured use of imported quick couplings and valves for a compact structure, providing fewer malfunctions and ease of repair.
7. Hydraulic chuck drive, foot clamps, feed cylinder and drill head, achieving quality control for pulling/pushing rods, rising/lowering the drill head, etc. 8. The model design takes advantage of “spring closed, hydraulic open” on the chuck and foot clamps, to avoid accidents in the case of sudden power loss, with a maximum chuck diameter of 97 mm.9. Divided into front mast support, mast and side mast, the mast system slides through the flexible front mast support. The height of the mast can be changed by adjusting the extendable side mast.10. Higher drill efficiency and fewer underground problems result from using a multi-grade, 1.8 m feed stroke cylinder.11. Ease of wheel and towing frame assembly assures access to small drill subs. Modularized design of the rig features easy set-up and disassembly, and rapid moves.12. Large-scale use of standardized parts and accessories makes it easier for maintenance and management.13. The comprehensive gauges on the rig facilitate the hole’s progress in real-time.14. Imported critical components include hydraulic pumps, motors and control valves, assuring the rig’s proficiency.15. An electronic step-down control box is utilized when initiating the power unit, lessoning the sudden impact from the electromotor to the power network.16. The electromotor has intelligent monitor functions which continually check for electrical overloads, short circuits, electrical source variation, and over- and under-pressure, etc.
CKD 600C Specifications
DrillCapacity
Hydraulic System
PowerSystem
DrillHead
Wire-lineWinch
Mast
FootClamp
TransportDimensions
TotalWeight
Drill Rod DiameterDownward
1,000 m750 m600 m350 m
ABNH
Level650 m470 m370 m210 m
Upward750 m650 m370 m210 m
Pressure:Cooling:
Model:Power:Electromotor RPM:
Max Torque:Max Rotation:Feed Stroke:Max Inside Diameter:Max Pull:Max Push:
Max Pull:Pull Speed:Rope Diameter:Rope Length:
Length:Drill Angle:Dump Length:
Drill Rod:
Main Frame Unit:Power Unit:Operation Unit:
B, N, H
330 x 1,800 x 2,170 mm3,300 x 1,210 x 1,380 mm840 x 730 x 1,000 mm
4.03 t
26 MPaWater Cooled
Siemens Y2 - 250M - 4B3555 kW1,480 rpm
1,030 Nm1,250 rpm1,800 mm97 mm65 kN65 kN
10 kN (bare drum)120 m/min (bare drum)6 mm800 m
3.3 - 5.8 m-900 - 900
1.1 m
Drill Depth
Intercore PerforacionesJalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302Fax: +52 (33) 3686 8128
[email protected] www.intercore.com.mx
CMR 1000Multi-purpose Drill Rig
The CMR 1000 is designed for multi-purpose diamond and reverse circulation drilling; this machine is a high-capacity, heavy-duty, multi-purpose drill rig. Air hammer drilling utilizes axial pressure, with hydraulic pistons working against the upward force created when drilling, ensuring the drilling force efficiently passes through the pipe to the bit. When using air hammer drilling, rotation speed is 15-30 rpm.
The following highlights the CMR 1000’s major features:1. High drill efficiency2. Adopted to complicated ground stratum3. Quality hole formation4. Simple drill technique
5. Lower cost6. Reduced sample contamination7. Multi-purpose diamond and RC capability
Combination of Core and RC DrillingThe drill depth of most RC drill equipment is approximately 400 meters due to the use of heavy, double-walled drill pipes. The CMR 1000 is perfectly designed with the combination of diamond and RC drill capabilities; RC for shallow, inexpensive drilling and quality control, and core for deep drilling and reserve estimation – all in one rig.
CMR 1000 Specifications
DrillCapacity
Hydraulic System
PowerSystem
DrillHead
Main Winch
Wire-lineWinch
Mast
FootClamp
Foot ClampShackle Equipment
TransportDimensions
TotalWeight
Dia of Drill RodBNHP4”
4.5”
DiamondDrilling
RC
Drill Depth2,000 m1,500 m1,000 m750 m400 m320 m
Pressure:Cooling:
Model:Type:Power:Engine RPM:
Max Torque:Max Rotation:Feed Stroke:Head Type:Max Pull:Max Push:
Max Pull:Pull Speed:Rope Diameter:Rope Length:
Max Pull:Pull Speed:Rope Diameter:Rope Length:
Length:Drill Angle:Dump Length:
Drill Rod: 3.5”, 4”, 4.5”
Drill Rod: B, N, H, P, PW
L x W x H: 13,300 x 2,500 x 3,230 mm
20 t
29 MPaAir Cooled
Cummins 6LTAA 8.9 - C325Turbo Charged239 kW2,200 rpm
11,400 Nm1,180 rpm7,320 mmTop Drive160 kN80 kN
138 kN @ 50 m/min85 kN @ 80 m/min22 mm25 m
14 kN @ 120 m/min (bare drum)5.5 kN @ 380 m/min (bare drum)6.6 mm2,000 m
13.3 m450 - 900
1.4 m
Intercore PerforacionesJalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302Fax: +52 (33) 3686 8128
[email protected] www.intercore.com.mx