INTELLIGENTWiFi&PoESOLUTIONS TABLEOFCONTENTS - Access...

INTELLIGENT WiFi & PoE SOLUTIONS

TABLE OF CONTENTSPrice Book No. 30 | September 1, 2017

Copyright © 2017 Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without theexpress written permission of Sargent Manufacturing Company is prohibited. Contact us at: 800-727-5477 or visit www.intelligentopenings.com

PROFILE SERIES v.S1 and v.S2 Prox and iCLASS

How to Order/ANSI Finish & Function Comparison ..................IP-1

Profile Series v.S1 Prox 10-Line Cylindrical Lock

Profile Series v.S1 10-Line Options...........................................IP-2

Profile Series v.S1 10-Line Cylindrical Lock..............................IP-3

Profile Series v.S1 Prox 8200 Mortise Lock

Profile Series v.S1 8200 Options...............................................IP-4

Profile Series v.S1 8200 Mortise Lock.......................................IP-5

Profile Series v.S1 Prox 80 Series Exit Device

Profile Series v.S1 80 Series Options .......................................IP-6

Profile Series v.S1 80 Series Exit Device..................................IP-7

Profile Series v.S1 iCLASS 10-Line Cylindrical Lock

Profile Series v.S1 10-Line Options...........................................IP-8

Profile Series v.S1 10-Line Cylindrical Lock..............................IP-9

Profile Series v.S1 iCLASS 8200 Mortise Lock

Profile Series v.S1 8200 Options.............................................IP-10

Profile Series v.S1 8200 Mortise Lock.....................................IP-11

Profile Series v.S1 iCLASS 80 Series Exit Device

Profile Series v.S1 80 Series Options .....................................IP-12

Profile Series v.S1 80 Series Exit Device................................IP-13

Profile Series v.S2 Prox 10-Line Cylindrical Lock

Profile Series v.S2 10-Line Options.........................................IP-14

Profile Series v.S2 10-Line Cylindrical Lock............................IP-15

Profile Series v.S2 Prox 8200 Mortise Lock



Profile Series v.S2 Prox 80 Series Exit Device



Profile Series v.S2 iCLASS 10-Line Cylindrical Lock

Profile Series v.S2 10-Line Options.........................................IP-20

Profile Series v.S2 10-Line Cylindrical Lock............................IP-21

Profile Series v.S2 iCLASS 8200 Mortise Lock



Profile Series v.S2 iCLASS 80 Series Exit Device



IN120 & IN220 Intelligent WiFi Access Control

IN120 & IN220 10 Line Cylindrical Locks................................IP-26

IN120 & IN220 10 Line Cylindrical Options.............................IP-27

IN120 & IN220 7900 Series Mortise Locks .............................IP-28


IN120 & IN220 7900 Series Mortise Options ..........................IP-30



IN120 & IN220 8200 Series Mortise Options ..........................IP-33

IN120 & IN220 80 Series Exit Devices....................................IP-34

IN120 & IN220 80 Series Exit Devices....................................IP-35

IN120 & IN220 80 Series Exit Devices Options ......................IP-36

IN120 & IN220 FM7300 Series Multi-Point Locks ...................IP-37



IN120 Replacement Parts .......................................................IP-40

Price Book No. 30 | September 1, 2017


IP-1INTELLIGENT WiFi and PoE SOLUTIONS

PROFILE SERIES v.S1 & v.S2

How to Order

Step Description ExampleBored

Quantity Each 10 Ea.Option Consult catalog for options available 10 Ea. 10-Product Series 10L Profile Series 10 Ea. 10-10Function Consult catalog for available functions 10 Ea. 10-10G77Technology/Trim Consult catalog for available technology and lever designs 10 Ea. 10-S2-10G77 PKLFinish Consult catalog for available finishes 10 Ea. 10-S2-10G77 PKL 26DHand Specify hand 10 Ea. 10-S2-10G77 PKL 26D RHMortiseQuantity Each 10 Ea.Option Consult catalog for options available 10 Ea. 10-Product Series 8200 Profile Series 10 Ea. 10-82Function Consult catalog for available functions 10 Ea. 10-82276Technology/Trim Consult catalog for technology and available lever designs 10 Ea. 10-S2-82276 PKLFinish Consult catalog for available finishes 10 Ea. 10-S2-82276 PKL 26DHand Specify Hand 10 Ea. 10-S2-82276 PKL 26D RHExitQuantity Each 10 Ea.Option Consult catalog for options available 10 Ea. 12-Technology PA 10 Ea. 12-S2-PAProduct Series 80 Series Profile Series 10 Ea. 12-S2-PA-88Function Consult catalog for available functions 10 Ea. 12-S2-PA-8877Rail Size E, F, J, G consult catalog for descriptions 10 Ea. 12-S2-PA-8877 FTrim - ET Consult catalog for available lever designs 10 Ea. 12-S2-PA-8877 F ETLFinish (Trim/ET) Consult catalog for available finishes 10 Ea. 12-S2-PA-8877 F ETL 26D/32DHand Specify Hand 10 Ea. 12-S2-PA-8877 F ETL 26D/32D RHRDoor Size Specify Door width 10 Ea. 12-S2-PA-8877 F ETL 26D/32D RHR x 36"TechnologyCatalog # DescriptionS1 & S2 IA Profile Series – iCLASS OnlyS1 & S2 IK Profile Series – iCLASS & KeypadS1 & S2 PA Profile Series – Prox onlyS1 & S2 PK Profile Series - Prox & Keypad

FunctionCatalog # DescriptionBored Lock

10G77 Entry Lock with cylinder override

Mortise Lock82276 Entry Lock with cylinder override and deadbolt82277 Entry Lock with deadbolt (no cylinder)82278 Entry Lock with cylinder override (no deadbolt)82279 Entry Lock (no cylinder or deadbolt)

80 Series Exit - Rim8877 with cylinder override8878 without cylinder override

80 Series Exit - Mortise8977 with cylinder override8978 without cylinder override

FinishSARGENT Description ANSIUS3 Polished brass 605US4 Satin brass 606US9 Polished bronze 611US10 Satin bronze, clear powder coat 612US10B Oxidized satin bronze oil rubbed 613US10BE Dark Oxidized Satin Bronze - equivalent 613EUS10BL Oxidized satin bronze, clear powder coat —US14 Bright nickel, clear coated 618US15 Satin nickel, clear coated 619US20D Dark statuary bronze, clear powder coat —US26 Polished chrome 625US26D Satin chrome 626US32 Polished stainless steel 629US32D Satin stainless steel 630Note: Refer to each price page for available finishes by

product series.

Available through Authorized Channel Partners only.Contact your local ASSA ABLOY Door Security Solutions sales consultant for details.

IP-2INTELLIGENT PoE SOLUTIONS

PROFILE SERIES v.S1 PROX10 LINE CYLINDRICAL LOCKPrice Book No. 30 | September 1, 2017


Options Description Price10 SARGENT Signature Key System $54.00 /cyl11 SARGENT XC Key System (not available with 10, 22, SC, SE) No addition1160 Sargent XC Large Format Interchangeable Plastic Disposable Construction Core No addition1163 Sargent XC Large Format Interchangeable Core Cylinder - Includes masterkeying charges $71.001164 Sargent XC Large Format Interchangeable Construction Core Cylinder See CK-21170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-211737P Small Format interchangeable core - to accept 7 pin XC permanent core $63.00 / cyl.21 SARGENT Construction Key System (lost ball) - for new systems est. since 5/1/96 $16.00 /cyl22 SARGENT Construction Key System (split key) - for pre-est. split key systems only $32.00 /cyl23 Lockset x 3-3/4" Backset $10.0025 Lockset x 5" Backset $15.0028 Lockset x ANSI A115.2-1971 Strike #808: - Lip lengths 1-1/8", 1-1/4" or 1-3/8" No addition

- Lip Lengths 1-5/8" to 2-7/8" in 1/4" increments $11.0030 10 Line Lever to accept Schlage cylinder (no cylinder provided) No addition36 6 Lobe head security screws $14.0037 Spanner head security screws $9.0041 3/4" throw with latch $94.0060 SARGENT Large Format Interchangeable Plastic Disposable Construction Core No addition63 SARGENT Large Format Interchangeable Core Cylinder includes master and grandmaster keying charge $71.0064 SARGENT Large Format Interchangeable Construction Core Cylinder See CK-26573 Small Format 6-Pin Uncombinated Core (Refer to CK-12) Not available with J lever $53.0065737P Small Format 7-Pin Uncombinated Core (Refer to CK-12) Not available with J lever $53.0070 Small Format Interchangeable disposable plastic construction core (not avail. w/J Lever) No addition72 Small Format Interchangeable 6-Pin construction core (not avail. w/J Lever)(7-Pin with 11 option) See page CK-273 Small Format Interchangeable 6-Pin core (not avail. w/J Lever) $63.00 /cyl.737P Small Format Interchangeable 7-Pin core (not avail. w/J Lever) $63.00 /cyl.75 Tactile Warning - Milled on backside of inside lever (Not available with Coastal Levers) $35.0076 Tactile Warning - Milled on backside of outside lever (Not available with Coastal Levers) $35.0077 Tactile Warning - Milled on backside of both levers (Not available with Coastal Levers) $70.0080 Levers to accept KESO and KESO F1 - no cylinder provided (not avail. w/J Lever) -$81.00/cyl.85 Tactile Warning - Abrasive coating on inside lever $41.0086 Tactile Warning - Abrasive coating on outside lever $41.0087 Tactile Warning - Abrasive coating on both levers $82.00BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE) Add $22.00 /cyl.F182 SARGENT KESO Security Cylinder - Patented - (not available w/J Lever) $78.00 /cyl.82 SARGENT KESO Security Cylinder (existing Key Systems only) $78.00DG1 Patented Degree DG1 Key System No AdditionDG160 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG163 Patented Degree DG1 Large Format Interchangeable Core Cylinder - Includes master keying charges $71.00DG164 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG2 Patented Degree DG2 Key System incorporating a locking sidebar $54.00/cyl.DG260 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG263 Patented Degree DG2 Large Format Interchangeable Core Cylinder - Includes master keying charges $125.00DG264 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG3 Patented Degree DG3 Key System incorporating a locking sidebar and UL437 listed $76.00/cyl.DG360 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG363 Patented Degree DG3 Large Format Interchangeable Core Cylinder - Includes master keying charges $147.00DG364 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2LC Less Cylinder -$81.00/cyl.SC Schlage C Keyway cylinder, 0-bitted No AdditionSE Schlage E Keyway cylinder, 0-bitted No AdditionSF L Lever to accept Medeco Key Mark Large Format Interchangeable

and Schlage Full Size Interchangeable Core (no cylinder provided) No AdditionSG MicroShield™ an antimicrobial powder coat finish $62.00WBS Wrought Box Strike No AdditionCPC Clear Powder Coat over 26/26D. All orders will continue to be handled as a “special” when CPC is ordered. $58.00


PROFILE SERIES v.S1 PROX10 LINE CYLINDRICAL LOCK



10L Profile Series 03/04/09/10/10B/10BLOption Function Trim Description 10BE/26D 14/15/20D/26

S1 10G77 PA x Lever Design Proximity Only Entry Lockwith Cylinder Override $2,250.00 $2,355.00

S1 10G77 PK x Lever Design Proximity and Keypad Entry Lockwith Cylinder Override $2,335.00 $2,440.00

Note:The WFCD1 Network and Lock Configuration Tool is required to configure each v.S1 lock system.

CD Tool Kits Price

WFCD1 Network and Lock Configuration CD Tool Kit $123.00WFCD2 Lock Management Tool CD (up to 25 locks) $1,316.00WFCD3 Lock Management Tool CD (up to 50 locks) $3,464.00DHTA PoE Cable Tester $161.00


ACP and CI certification required for every order.

LEVERS:

Standard: B, J, L, P

Coastal: Y & G


PROFILE SERIES v.S1 PROX8200 MORTISE LOCKPrice Book No. 30 | September 1, 2017


Options Description Price3 Stainless Steel hub for institutional specifications $61.0010 SARGENT Signature Key System $54.00 /cyl11 SARGENT XC Key System (not available with 10, 22, SC, SE) No addition1160 Sargent XC Large Format Interchangeable Plastic Disposable Construction Core No addition1163 Sargent XC Large Format Interchangeable Core Cylinder - Includes masterkeying charges $71.001164 Sargent XC Large Format Interchangeable Construction Core Cylinder See CK-21170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-211737P Small Format interchangeable core - to accept 7 pin XC permanent core $63.00 / cyl.21 SARGENT Construction Key System (lost ball) - for new systems est. since 5/1/96 $16.00 /cyl22 SARGENT Construction Key System (split key) - for pre-est. split key systems only $32.00 /cyl23 4-7/8" ANSI Strike No addition36 6 Lobe head security screws $22.0037 Spanner head security screws $16.0060 SARGENT Large Format Interchangeable Plastic Disposable Construction Core No addition63 SARGENT Large Format Interchangeable Core Cylinder includes master and grandmaster keying charge $71.0064 SARGENT Large Format Interchangeable Construction Core Cylinder See CK-26573 Small Format 6-Pin Uncombinated Core (Refer to CK-12) $53.0065737P Small Format 7-Pin Uncombinated Core (Refer to CK-12) $53.0070 Small Format interchangeable disposable plastic construction core (Not available with J lever) No addition72 Small Format interchangeable 6-Pin construction core (not available with J lever) See page CK-273 Small Format interchangeable core 6-pin Includes MK and GMK keying charges

(Not available with J lever) $63.00737P Small Format interchangeable core 7-pin (refer to CK-12 for available keyways)

Includes MK and GMK keying charges (Not available with J lever) $63.0075 Tactile Warning - Milled on backside of inside lever

(Not available with Studio & Coastal Levers and the A Lever) $66.0076 Tactile Warning - Milled on backside of outside lever

(Not available with Studio & Coastal Levers and the A Lever) $66.0077 Tactile Warning - Milled on backside of both levers

(Not available with Studio & Coastal Levers and the A Lever) $132.0081 Cylinder to accept KESO & KESO F1 removable core - no core provided No Addition82 SARGENT KESO Security Cylinder (for existing systems) $78.00 /cylF182 SARGENT KESO Security Cylinder - Patented $78.00 /cyl83 SARGENT KESO Security Removable core cylinder (for existing systems) $111.00 /cylF183 SARGENT KESO Security Removable core cylinder - Patented $111.00 /cyl84 SARGENT KESO Security removable construction core cylinder See page CK-1885 Tactile Warning - Abrasive coating on inside lever $41.0086 Tactile Warning - Abrasive coating on outside lever $41.0087 Tactile Warning - Abrasive coating on both levers $82.00BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE) Add $22.00 /cyl.DG1 Patented Degree DG1 Key System No AdditionDG160 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG163 Patented Degree DG1 Large Format Interchangeable Core Cylinder - Includes master keying charges $71.00DG164 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG2 Patented Degree DG2 Key System incorporating a locking sidebar $54.00/cyl.DG260 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG263 Patented Degree DG2 Large Format Interchangeable Core Cylinder - Includes master keying charges $125.00DG264 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG3 Patented Degree DG3 Key System incorporating a locking sidebar and UL437 listed $76.00/cyl.DG360 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG363 Patented Degree DG3 Large Format Interchangeable Core Cylinder - Includes master keying charges $147.00DG364 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2LC Less Cylinder -$83.00/cyl.OBS Open Back Strike $70.00SG MicroShield™ an antimicrobial powder coat finish $62.00WBS Wrought Box Strike No Addition

CPC Clear Powder Coat over 26/26D. All orders will continue to be handled as a “special” when CPC is ordered. $58.00


PROFILE SERIES v.S1 PROX8200 MORTISE LOCK



8200 Profile Series 03/04/09/10/10B/Option Function Trim Description 10BE/26D 10BL/14/15/20D/26

S1 82276 PA x Lever Design Proximity ONLY Entry Lock w/Cylinder Override,

with Deadbolt $2,458.00 $2,616.00

S1 82276 PK x Lever Design Proximity and Keypad Entry Lock w/Cyl. Override,

with Deadbolt $2,541.00 $2,699.00

S1 82277 PA x Lever Design Proximity ONLY Entry Lock w/o Cylinder Override,

with Deadbolt $2,388.00 $2,546.00

S1 82277 PK x Lever Design Proximity and Keypad Entry Lock w/o Cyl. Override,

with Deadbolt $2,469.00 $2,627.00


without Deadbolt $2,435.00 $2,593.00







Specify hand when ordering* Following levers not available in 32 & 32D: MA, MC, MH, MK, MM, MN, MO, MP, MQ, MS, MT, MU, MV, MX, MY, MZ, NS, NU

Note: Consult catalog for available finishes & ordering information.



CD Tool Kits Price



LEVERS:Standard: A, B, E, F, J, L, P, WCoastal: G, R, S, Y*Studio Collection Except for Gramercy, Wooster Square, & Grant Park SeriesFor Gramercy: RAG, RAL, RAM, RAS, RAW, RCM, REM, RGM – Add $138.00 to below 10BE/26D prices.For Wooster Square: H001, H002, H003, H004, H005, H006 – Add $138.00 to below prices.For Grant Park: H007, H008, H009, H010, H011 – Add $138.00 to below prices.


PROFILE SERIES v.S1 PROX80 SERIES EXIT DEVICEPrice Book No. 30 | September 1, 2017


Options Description Price10 SARGENT Signature Key System $54.00 /cyl11 SARGENT XC Key System (not available with 10, 22, SC, SE) No addition1160 Sargent XC Large Format Interchangeable Plastic Disposable Construction Core No addition1163 Sargent XC Large Format Interchangeable Core Cylinder - Includes masterkeying charges $71.001164 Sargent XC Large Format Interchangeable Construction Core Cylinder See CK-21170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-211737P Small Format interchangeable core - to accept 7 pin XC permanent core $63.00 / cyl.12 UL Fire Label Exit Devices (not available with 16- option) $163.0016 Cylinder lockdown feature in rail (not available with 12- option) $118.0019 80 Series pushbar without Lexan Touchpad No addition21 SARGENT Construction Key System (lost ball) - for new systems est. since 5/1/96 $16.00 /cyl22 SARGENT Construction Key System (split key) - for pre-est. split key systems only $32.00 /cyl23 4-7/8" ANSI Strike No addition36 6 Lobe head security screws (8800) $44.0036 6 Lobe head security screws (8900) $48.0037 Spanner head security screws (8800) $29.0037 Spanner head security screws (8900) $32.0043 Flush End Cap No Addition60 SARGENT Large Format Interchangeable Plastic Disposable Construction Core No addition63 SARGENT Large Format Interchangeable Core Cylinder includes master and grandmaster keying charge $71.0064 SARGENT Large Format Interchangeable Construction Core Cylinder See CK-26573 Small Format 6-Pin Uncombinated Core (Refer to CK-12) $53.0065737P Small Format 7-Pin Uncombinated Core (Refer to CK-12) $53.0070 Small Format Interchangeable disposable plastic construction core No addition72 Small Format Interchangeable 6-Pin construction core (7-Pin with 11 option) See page CK-273 Small Format Interchangeable 6-Pin core $63.00 /cyl.737P Small Format Interchangeable 7-Pin core $63.00 /cyl.76 Tactile Warning - Milled on backside of outside lever

(Not available with Studio & Coastal Levers and the A Lever) $66.0081 Cylinder to accept KESO & KESO F1 removable core - no core provided No Addition82 SARGENT KESO Security Cylinder (for existing systems) $78.00 /cylF182 SARGENT KESO Security Cylinder - Patented $78.00 /cyl83 SARGENT KESO Security Removable core cylinder (for existing systems) $111.00 /cylF183 SARGENT KESO Security Removable core cylinder - Patented $111.00 /cyl84 SARGENT KESO Security removable construction core cylinder See page CK-1885 Tactile Warning - Abrasive strip on push rail $89.0086 Tactile Warning - Abrasive coating on outside lever $41.0087 Tactile Warning - Abrasive strip on push rail & abrasive coating on outside lever $130.00BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE) Add $22.00 /cyl.DG1 Patented Degree DG1 Key System No AdditionDG160 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG163 Patented Degree DG1 Large Format Interchangeable Core Cylinder - Includes master keying charges $71.00DG164 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG2 Patented Degree DG2 Key System incorporating a locking sidebar $54.00/cyl.DG260 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG263 Patented Degree DG2 Large Format Interchangeable Core Cylinder - Includes master keying charges $125.00DG264 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG3 Patented Degree DG3 Key System incorporating a locking sidebar and UL437 listed $76.00/cyl.DG360 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG363 Patented Degree DG3 Large Format Interchangeable Core Cylinder - Includes master keying charges $147.00DG364 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2LC Less Cylinder -$83.00/cyl.PL SARGuide™ PL – Photoluminescent Coating – (Pushbar w/o Lexan Touchpad

- 19 option is supplied as standard) Require handing $335.00SC Schlage C Keyway cylinder, 0-bitted (8800 Series Only) No AdditionSE Schlage E Keyway cylinder, 0-bitted (8800 Series Only) No AdditionSG MicroShield™ an antimicrobial powder coat $76.00

CPC Clear Powder Coat – Recommended for exit devices used in full exterior application and highly corrosiveareas with 32 and 32D finishes. Discount Do Not Apply $198.00


PROFILE SERIES v.S1 PROX80 SERIES EXIT DEVICE



8800 Profile Series Rim Exit Device 03/04/09/10/10BOptions Function Trim Description 10BE/32D 10BL/20D/32S1PA 8877 ET x Lever Design Proximity ONLY Rim Exit Device

with Cylinder Override $3,531.00 $3,584.00S1PK 8877 ET x Lever Design Proximity and Keypad Rim Exit Device

with Cylinder Override $3,617.00 $3,670.00S1PA 8878 ET x Lever Design Proximity ONLY Rim Exit Device

without Cylinder Override $3,457.00 $3,510.00S1PK 8878 ET x Lever Design Proximity and Keypad Rim Exit Device

without Cylinder Override $3,543.00 $3,596.00

8900 Profile Series Mortise Exit Device

S1PA 8977 ET x Lever Design Proximity ONLY Mortise Exit Devicewith Cylinder Override $3,813.00 $3,866.00

S1PK 8977 ET x Lever Design Proximity and Keypad Mortise Exit Devicewith Cylinder Override $3,899.00 $3,952.00

S1PA 8978 ET x Lever Design Proximity ONLY Mortise Exit Devicewithout Cylinder Override $3,738.00 $3,791.00

S1PK 8978 ET x Lever Design Proximity and Keypad Mortise Exit Devicewithout Cylinder Override $3,824.00 $3,877.00

Specify hand when ordering.

Notes: 15 or 26D finishes are available on outside trim only, the exit evices will be supplied in 32D.14 or 26 Finishes are available on outside trim only, the exit devices will be supplied in 32 finish.Consult catalog for available lever designs, finishes, and ordering information

The WFCD1 Network and Lock ConfigurationTool is required to configure each v.S1 lock system.


CD Tool Kits Price



ESCUTCHEON: ET

LEVERS:Standard: A, B, E, F, J, L, P, WCoastal: G, R, S, YStudio Collection Except for Gramercy, Wooster Square, and Grant Park SeriesFor Gramercy: RAG, RAL, RAM, RAS, RAW, RCM, REM, RGM – Add $160.00 to below prices.For Wooster Square: H001, H002, H003, H004, H005, H006 – Add $160.00 to below prices.For Grant Park: H007, H008, H009, H010, H011 – Add $160.00 to below prices.


PROFILE SERIES v.S1 iCLASS10 LINE CYLINDRICAL LOCKPrice Book No. 30 | September 1, 2017




and Schlage Full Size Interchangeable Core (no cylinder provided) No AdditionSG MicroShield™ an antimicrobial powder coat finish $62.00WBS Wrought Box Strike No Addition



PROFILE SERIES v.S1 iCLASS10 LINE CYLINDRICAL LOCK



10L Profile Series 03/04/09/10/10B/10BL/Option Function Trim Description 10BE/26D 14/15/20D/26

S1 10G77 IA x Lever Design iCLASS Only Entry Lockwith Cylinder Override $2,375.00 $2,480.00

S1 10G77 IK x Lever Design iCLASS and Keypad Entry Lockwith Cylinder Override $2,460.00 $2,565.00


CD Tool Kits Price




LEVERS:


Coastal: Y & G


PROFILE SERIES v.S1 iCLASS8200 MORTISE LOCKPrice Book No. 30 | September 1, 2017







(Not available with Studio & Coastal Levers and the A Lever) $132.0081 Cylinder to accept KESO & KESO F1 removable core - no core provided No Addition82 SARGENT KESO Security Cylinder (for existing systems) $78.00 /cylF182 SARGENT KESO Security Cylinder - Patented $78.00 /cyl83 SARGENT KESO Security Removable core cylinder (for existing systems) $111.00 /cylF183 SARGENT KESO Security Removable core cylinder - Patented $111.00 /cyl84 SARGENT KESO Security removable construction core cylinder See page CK-1885 Tactile Warning - Abrasive coating on inside lever $41.0086 Tactile Warning - Abrasive coating on outside lever $41.0087 Tactile Warning - Abrasive coating on both levers $82.00BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE) Add $22.00 /cyl.DG1 Patented Degree DG1 Key System No AdditionDG160 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG163 Patented Degree DG1 Large Format Interchangeable Core Cylinder - Includes master keying charges $71.00DG164 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG2 Patented Degree DG2 Key System incorporating a locking sidebar $54.00/cyl.DG260 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG263 Patented Degree DG2 Large Format Interchangeable Core Cylinder - Includes master keying charges $125.00DG264 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG3 Patented Degree DG3 Key System incorporating a locking sidebar and UL437 listed $76.00/cyl.DG360 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG363 Patented Degree DG3 Large Format Interchangeable Core Cylinder - Includes master keying charges $147.00DG364 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2LC Less Cylinder -$83.00/cyl.OBS Open Back Strike $70.00SG MicroShield™ an antimicrobial powder coat finish $62.00WBS Wrought Box Strike No Addition



PROFILE SERIES v.S1 iCLASS8200 MORTISE LOCK




S1 82276 IA x Lever Design iCLASS ONLY Entry Lock w/Cylinder Override,

with Deadbolt $2,583.00 $2,741.00

S1 82276 IK x Lever Design iCLASS and Keypad Entry Lock w/Cyl. Override,

with Deadbolt $2,666.00 $2,824.00

S1 82277 IA x Lever Design iCLASS ONLY Entry Lock w/o Cylinder Override,

with Deadbolt $2,513.00 $2,671.00

S1 82277 IK x Lever Design iCLASS and Keypad Entry Lock w/o Cyl. Override,

with Deadbolt $2,594.00 $2,752.00









Notes: * Following levers not available in 32 & 32D: MA, MC, MH, MK, MM, MN, MO, MP, MQ, MS, MT, MU, MV, MX, MY, MZ, NS, NUSpecify hand when orderingConsult catalog for available finishes & ordering information.

The WFCD1 Network and Lock Configuration Tool is required to configure each v.S1 lock system.


CD Tool Kits Price



LEVERS:Standard: A, B, E, F, J, L, P, W

Coastal: G, R, S, Y

*Studio Collection Except for Gramercy, Wooster Square, & Grant Park Series

For Gramercy: RAG, RAL, RAM, RAS, RAW, RCM, REM, RGM – Add $138.00 to below 10BE/26D prices

For Wooster Square: H001, H002, H003, H004, H005, H006 – Add $138.00 to below prices

For Grant Park: H007, H008, H009, H010, H011 – Add $138.00 to below prices


PROFILE SERIES v.S1 iCLASS80 SERIES EXIT DEVICEPrice Book No. 30 | September 1, 2017




- 19 option is supplied as standard) Require handing $335.00SC Schlage C Keyway cylinder, 0-bitted (8800 Series Only) No AdditionSE Schlage E Keyway cylinder, 0-bitted (8800 Series Only) No AdditionSG MicroShield™ an antimicrobial powder coat $76.00CPC Clear Powder Coat – Recommended for exit devices used in full exterior application and highly corrosive

areas with 32 and 32D finishes. Discount Do Not Apply $198.00


PROFILE SERIES v.S1 iCLASS80 SERIES EXIT DEVICE



8800 Profile Series Rim Exit Device 03/04/09/10/10BOptions Function Trim Description 10BE/32D 10BL/20D/32S1IA 8877 ET x Lever Design iCLASS ONLY Rim Exit Device

with Cylinder Override $3,656.00 $3,709.00S1IK 8877 ET x Lever Design iCLASS and Keypad Rim Exit Device

with Cylinder Override $3,742.00 $3,795.00S1IA 8878 ET x Lever Design iCLASS ONLY Rim Exit Device

without Cylinder Override $3,582.00 $3,635.00S1IK 8878 ET x Lever Design iCLASS and Keypad Rim Exit Device



S1IA 8977 ET x Lever Design iCLASS ONLY Mortise Exit Devicewith Cylinder Override $3,938.00 $3,991.00

S1IK 8977 ET x Lever Design iCLASS and Keypad Mortise Exit Devicewith Cylinder Override $4,024.00 $4,077.00

S1IA 8978 ET x Lever Design iCLASS ONLY Mortise Exit Devicewithout Cylinder Override $3,863.00 $3,916.00

S1IK 8978 ET x Lever Design iCLASS and Keypad Mortise Exit Devicewithout Cylinder Override $3,949.00 $4,002.00

Notes: Specify hand when ordering15 or 26D finishes are available on outside trim only, the exit evices will be supplied in 32D.14 or 26 Finishes are available on outside trim only, the exit devices will be supplied in 32 finish.Consult catalog for available lever designs, finishes, and ordering information.



CD Tool Kits Price



ESCUTCHEON: ET

LEVERS:Standard: A, B, E, F, J, L, P, WCoastal: G, R, S, YStudio Collection Except for Gramercy, Wooster Square, and Grant ParkFor Gramercy: RAG, RAL, RAM, RAS, RAW, RCM, REM, RGM – Add $160.00 to below prices.For Wooster Square: H001, H002, H003, H004, H005, H006 – Add $160.00 to below prices.For Grant Park: H007, H008, H009, H010, H011 – Add $160.00 to below prices.

IP-14INTELLIGENT WiFi SOLUTIONS


Options Description Price10 SARGENT Signature Key System $54.00 /cyl11 SARGENT XC Key System (not available with 10, 22, SC, SE) No addition1160 Sargent XC Large Format Interchangeable Plastic Disposable Construction Core No addition1163 Sargent XC Large Format Interchangeable Core Cylinder - Includes masterkeying charges $71.001164 Sargent XC Large Format Interchangeable Construction Core Cylinder See CK-21170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-211737P Small Format interchangeable core - to accept 7 pin XC permanent core $63.00 / cyl.21 SARGENT Construction Key System (lost ball) - for new systems est. since 5/1/96 $16.00 /cyl22 SARGENT Construction Key System (split key) - for pre-est. split key systems only $32.00 /cyl28 Lockset x ANSI A115.2-1971 Strike #808: - Lip lengths 1-1/8", 1-1/4" or 1-3/8" No addition

- Lip Lengths 1-5/8" to 2-7/8" in 1/4" increments $11.0030 10 Line Lever to accept Schlage cylinder (no cylinder provided) No addition36 6 Lobe head security screws $14.0037 Spanner head security screws $9.0041 3/4" throw with latch $94.0060 SARGENT Large Format Interchangeable Plastic Disposable Construction Core No addition63 SARGENT Large Format Interchangeable Core Cylinder includes master and grandmaster keying charge $71.0064 SARGENT Large Format Interchangeable Construction Core Cylinder See CK-26573 Small Format 6-Pin Uncombinated Core (Refer to CK-12) Not available with J lever $53.0065737P Small Format 7-Pin Uncombinated Core (Refer to CK-12) Not available with J lever $53.0070 Small Format Interchangeable disposable plastic construction core (not avail. w/J Lever) No addition72 Small Format Interchangeable 6-Pin construction core (not avail. w/J Lever)(7-Pin with 11 option) See page CK-273 Small Format Interchangeable 6-Pin core (not avail. w/J Lever) $63.00 /cyl.737P Small Format Interchangeable 7-Pin core (not avail. w/J Lever) $63.00 /cyl.75 Tactile Warning - Milled on backside of inside lever (Not available with Coastal Levers) $35.0076 Tactile Warning - Milled on backside of outside lever (Not available with Coastal Levers) $35.0077 Tactile Warning - Milled on backside of both levers (Not available with Coastal Levers) $70.0080 Levers to accept KESO and KESO F1 - no cylinder provided (not avail. w/J Lever) -$81.00/cyl.85 Tactile Warning - Abrasive coating on inside lever $41.0086 Tactile Warning - Abrasive coating on outside lever $41.0087 Tactile Warning - Abrasive coating on both levers $82.0091 Hard power (requires external 3267 power supply) $38.00BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE) Add $22.00 /cyl.DG1 Patented Degree DG1 Key System No AdditionDG160 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG163 Patented Degree DG1 Large Format Interchangeable Core Cylinder - Includes master keying charges $71.00DG164 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG2 Patented Degree DG2 Key System incorporating a locking sidebar $54.00/cyl.DG260 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG263 Patented Degree DG2 Large Format Interchangeable Core Cylinder - Includes master keying charges $125.00DG264 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG3 Patented Degree DG3 Key System incorporating a locking sidebar and UL437 listed $76.00/cyl.DG360 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG363 Patented Degree DG3 Large Format Interchangeable Core Cylinder - Includes master keying charges $147.00DG364 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2F182 SARGENT KESO Security Cylinder - Patented - (not available w/J Lever) $78.00 /cyl.82 SARGENT KESO Security Cylinder (existing Key Systems only) $78.00LC Less Cylinder -$81.00/cyl.SC Schlage C Keyway cylinder, 0-bitted No AdditionSE Schlage E Keyway cylinder, 0-bitted No AdditionSF L Lever to accept Medeco Key Mark Large Format Interchangeable







10L Profile Series 03/04/09/10/10B/Option Function Trim Description 10BE/26D 10BL/14/15/20D/26

S2 10G77 PA x Lever Design Proximity Only Entry Lockwith Cylinder Override $2,140.00 $2,245.00

S2 10G77 PK x Lever Design Proximity and Keypad Entry Lockwith Cylinder Override $2,225.00 $2,330.00


CD Tool Kits Price

WFCD1 Network and Lock Configuration CD Tool Kit $123.00WFCD2 Lock Management Tool CD (up to 25 locks) $1,316.00WFCD3 Lock Management Tool CD (up to 50 locks) $3,464.00

LEVERS:


Coastal: Y & G












(Not available with Studio & Coastal Levers and the A Lever) $132.0081 Cylinder to accept KESO & KESO F1 removable core - no core provided No Addition82 SARGENT KESO Security Cylinder (for existing systems) $78.00 /cylF182 SARGENT KESO Security Cylinder - Patented $78.00 /cyl83 SARGENT KESO Security Removable core cylinder (for existing systems) $111.00 /cylF183 SARGENT KESO Security Removable core cylinder - Patented $111.00 /cyl84 SARGENT KESO Security removable construction core cylinder See page CK-1885 Tactile Warning - Abrasive coating on inside lever $41.0086 Tactile Warning - Abrasive coating on outside lever $41.0087 Tactile Warning - Abrasive coating on both levers $82.0091 Hard power (requires external 3267 power supply) $38.00BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE) Add $22.00 /cyl.DG1 Patented Degree DG1 Key System No AdditionDG160 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG163 Patented Degree DG1 Large Format Interchangeable Core Cylinder - Includes master keying charges $71.00DG164 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG2 Patented Degree DG2 Key System incorporating a locking sidebar $54.00/cyl.DG260 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG263 Patented Degree DG2 Large Format Interchangeable Core Cylinder - Includes master keying charges $125.00DG264 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG3 Patented Degree DG3 Key System incorporating a locking sidebar and UL437 listed $76.00/cyl.DG360 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG363 Patented Degree DG3 Large Format Interchangeable Core Cylinder - Includes master keying charges $147.00DG364 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2LC Less Cylinder -$83.00/cyl.OBS Open Back Strike $70.00SG MicroShield™ an antimicrobial powder coat finish $62.00WBS Wrought Box Strike No Addition








with Deadbolt $2,348.00 $2,506.00


with Deadbolt $2,431.00 $2,589.00


with Deadbolt $2,278.00 $2,436.00


with Deadbolt $2,359.00 $2,517.00









Notes: * Following levers not available in 32 & 32D: MA, MC, MH, MK, MM, MN, MO, MP, MQ, MS, MT, MU, MV, MX, MY, MZ, NS, NUSpecify hand when ordering.Consult catalog for available finishes & ordering information.





CD Tool Kits Price



LEVERS:Standard: A, B, E, F, J, L, P, WCoastal: G, R, S, Y*Studio Collection Except for Gramercy, Wooster Square, and Grant Park SeriesFor Gramercy: RAG, RAL, RAM, RAS, RAW, RCM, REM, RGM – Add $138.00 to below 10BE/26D prices.For Wooster Square: H001, H002, H003, H004, H005, H006 – Add $138.00 to below prices.For Grant Park: H007, H008, H009, H010, H011 – Add $138.00 to below prices.




(Not available with Studio & Coastal Levers and the A Lever) $66.0081 Cylinder to accept KESO & KESO F1 removable core - no core provided No Addition82 SARGENT KESO Security Cylinder (for existing systems) $78.00 /cylF182 SARGENT KESO Security Cylinder - Patented $78.00 /cyl83 SARGENT KESO Security Removable core cylinder (for existing systems) $111.00 /cylF183 SARGENT KESO Security Removable core cylinder - Patented $111.00 /cyl84 SARGENT KESO Security removable construction core cylinder See page CK-1885 Tactile Warning - Abrasive strip on push rail $89.0086 Tactile Warning - Abrasive coating on outside lever $41.0087 Tactile Warning - Abrasive strip on push rail & abrasive coating on outside lever $130.0091 Hard power (requires external 3267 power supply) $38.00BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE) Add $22.00 /cyl.DG1 Patented Degree DG1 Key System No AdditionDG160 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG163 Patented Degree DG1 Large Format Interchangeable Core Cylinder - Includes master keying charges $71.00DG164 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG2 Patented Degree DG2 Key System incorporating a locking sidebar $54.00/cyl.DG260 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG263 Patented Degree DG2 Large Format Interchangeable Core Cylinder - Includes master keying charges $125.00DG264 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG3 Patented Degree DG3 Key System incorporating a locking sidebar and UL437 listed $76.00/cyl.DG360 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG363 Patented Degree DG3 Large Format Interchangeable Core Cylinder - Includes master keying charges $147.00DG364 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2LC Less Cylinder -$83.00/cyl.PL SARGuide™ PL – Photoluminescent Coating – (Pushbar w/o Lexan Touchpad

- 19 option is supplied as standard) Require handing $335.00SC Schlage C Keyway cylinder, 0-bitted (8800 Series Only) No AdditionSE Schlage E Keyway cylinder, 0-bitted (8800 Series Only) No AdditionSG MicroShield™ an antimicrobial powder coat $76.00CPC Clear Powder Coat – Recommended for exit devices used in full exterior application and highly corrosive






8800 Profile Series Rim Exit Device 03/04/09/10/10BOptions Function Trim Description 10BE/32D 10BL/20D/32S2PA 8877 ET x Lever Design Proximity ONLY Rim Exit Device

with Cylinder Override $3,421.00 $3,474.00S2PK 8877 ET x Lever Design Proximity and Keypad Rim Exit Device

with Cylinder Override $3,507.00 $3,560.00S2PA 8878 ET x Lever Design Proximity ONLY Rim Exit Device

without Cylinder Override $3,347.00 $3,400.00S2PK 8878 ET x Lever Design Proximity and Keypad Rim Exit Device



S2PA 8977 ET x Lever Design Proximity ONLY Mortise Exit Devicewith Cylinder Override $3,703.00 $3,756.00

S2PK 8977 ET x Lever Design Proximity and Keypad Mortise Exit Devicewith Cylinder Override $3,789.00 $3,842.00

S2PA 8978 ET x Lever Design Proximity ONLY Mortise Exit Devicewithout Cylinder Override $3,628.00 $3,681.00

S2PK 8978 ET x Lever Design Proximity and Keypad Mortise Exit Devicewithout Cylinder Override $3,714.00 $3,767.00

Note: Specify hand when ordering.15 or 26D finishes are available on outside trim only, the exit evices will be supplied in 32D.14 or 26 Finishes are available on outside trim only, the exit devices will be supplied in 32 finish.Consult catalog for available lever designs, finishes, and ordering information





CD Tool Kits Price



ESCUTCHEON: ET

LEVERS:Standard: A, B, E, F, J, L, P, WCoastal: G, R, S, YStudio Collection: Except for Gramercy, Wooster Square, and Grant Park SeriesFor Gramercy: RAG, RAL, RAM, RAS, RAW, RCM, REM, RGM – Add $160.00 to below prices.For Wooster Square: H001, H002, H003, H004, H005, H006 – Add $160.00 to below prices.For Grant Park: H007, H008, H009, H010, H011 – Add $160.00 to below prices.


PROFILE SERIES v.S2 iCLASS10 LINE CYLINDRICAL LOCKPrice Book No. 30 | September 1, 2017


Options Description Price10 SARGENT Signature Key System $54.00 /cyl11 SARGENT XC Key System (not available with 10, 22, SC, SE) No addition1160 Sargent XC Large Format Interchangeable Plastic Disposable Construction Core No addition1163 Sargent XC Large Format Interchangeable Core Cylinder - Includes masterkeying charges $71.001164 Sargent XC Large Format Interchangeable Construction Core Cylinder See CK-21170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-211737P Small Format interchangeable core - to accept 7 pin XC permanent core $63.00 / cyl.21 SARGENT Construction Key System (lost ball) - for new systems est. since 5/1/96 $16.00 /cyl22 SARGENT Construction Key System (split key) - for pre-est. split key systems only $32.00 /cyl28 Lockset x ANSI A115.2-1971 Strike #808: - Lip lengths 1-1/8", 1-1/4" or 1-3/8" No addition

- Lip Lengths 1-5/8" to 2-7/8" in 1/4" increments $11.0030 10 Line Lever to accept Schlage cylinder (no cylinder provided) No addition36 6 Lobe head security screws $14.0037 Spanner head security screws $9.0041 3/4" throw with latch $94.0060 SARGENT Large Format Interchangeable Plastic Disposable Construction Core No addition63 SARGENT Large Format Interchangeable Core Cylinder includes master and grandmaster keying charge $71.0064 SARGENT Large Format Interchangeable Construction Core Cylinder See CK-26573 Small Format 6-Pin Uncombinated Core (Refer to CK-12) Not available with J lever $53.0065737P Small Format 7-Pin Uncombinated Core (Refer to CK-12) Not available with J lever $53.0070 Small Format Interchangeable disposable plastic construction core (not avail. w/J Lever) No addition72 Small Format Interchangeable 6-Pin construction core (not avail. w/J Lever)(7-Pin with 11 option) See page CK-273 Small Format Interchangeable 6-Pin core (not avail. w/J Lever) $63.00 /cyl.737P Small Format Interchangeable 7-Pin core (not avail. w/J Lever) $63.00 /cyl.75 Tactile Warning - Milled on backside of inside lever (Not available with Coastal Levers) $35.0076 Tactile Warning - Milled on backside of outside lever (Not available with Coastal Levers) $35.0077 Tactile Warning - Milled on backside of both levers (Not available with Coastal Levers) $70.0080 Levers to accept KESO and KESO F1 - no cylinder provided (not avail. w/J Lever) -$81.00/cyl.85 Tactile Warning - Abrasive coating on inside lever $41.0086 Tactile Warning - Abrasive coating on outside lever $41.0087 Tactile Warning - Abrasive coating on both levers $82.0091 Hard power (requires external 3267 power supply) $38.00BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE) Add $22.00 /cyl.F182 SARGENT KESO Security Cylinder - Patented - (not available w/J Lever) $78.00 /cyl.82 SARGENT KESO Security Cylinder (existing Key Systems only) $78.00DG1 Patented Degree DG1 Key System No AdditionDG160 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG163 Patented Degree DG1 Large Format Interchangeable Core Cylinder - Includes master keying charges $71.00DG164 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG2 Patented Degree DG2 Key System incorporating a locking sidebar $54.00/cyl.DG260 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG263 Patented Degree DG2 Large Format Interchangeable Core Cylinder - Includes master keying charges $125.00DG264 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG3 Patented Degree DG3 Key System incorporating a locking sidebar and UL437 listed $76.00/cyl.DG360 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG363 Patented Degree DG3 Large Format Interchangeable Core Cylinder - Includes master keying charges $147.00DG364 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2LC Less Cylinder -$81.00/cyl.SC Schlage C Keyway cylinder, 0-bitted No AdditionSE Schlage E Keyway cylinder, 0-bitted No AdditionSF L Lever to accept Medeco Key Mark Large Format Interchangeable




PROFILE SERIES v.S2 iCLASS10 LINE CYLINDRICAL LOCK



10L Profile Series 03/04/09/10/10B/Option Function Trim Description 10BE/26D 10BL/14/15/20D/26

S2 10G77 IA x Lever Design iCLASS Only Entry Lockwith Cylinder Override $2,265.00 $2,370.00

S2 10G77 IK x Lever Design iCLASS and Keypad Entry Lockwith Cylinder Override $2,350.00 $2,455.00


CD Tool Kits Price


LEVERS:


Coastal: Y & G




PROFILE SERIES v.S2 iCLASS8200 MORTISE LOCKPrice Book No. 30 | September 1, 2017







(Not available with Studio & Coastal Levers and the A Lever) $132.0081 Cylinder to accept KESO & KESO F1 removable core - no core provided No Addition82 SARGENT KESO Security Cylinder (for existing systems) $78.00 /cylF182 SARGENT KESO Security Cylinder - Patented $78.00 /cyl83 SARGENT KESO Security Removable core cylinder (for existing systems) $111.00 /cylF183 SARGENT KESO Security Removable core cylinder - Patented $111.00 /cyl84 SARGENT KESO Security removable construction core cylinder See page CK-1885 Tactile Warning - Abrasive coating on inside lever $41.0086 Tactile Warning - Abrasive coating on outside lever $41.0087 Tactile Warning - Abrasive coating on both levers $82.0091 Hard power (requires external 3267 power supply) $38.00BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE) Add $22.00 /cyl.DG1 Patented Degree DG1 Key System No AdditionDG160 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG163 Patented Degree DG1 Large Format Interchangeable Core Cylinder - Includes master keying charges $71.00DG164 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG2 Patented Degree DG2 Key System incorporating a locking sidebar $54.00/cyl.DG260 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG263 Patented Degree DG2 Large Format Interchangeable Core Cylinder - Includes master keying charges $125.00DG264 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG3 Patented Degree DG3 Key System incorporating a locking sidebar and UL437 listed $76.00/cyl.DG360 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG363 Patented Degree DG3 Large Format Interchangeable Core Cylinder - Includes master keying charges $147.00DG364 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2LC Less Cylinder -$83.00/cyl.OBS Open Back Strike $70.00SG MicroShield™ an antimicrobial powder coat finish $62.00WBS Wrought Box Strike No Addition



PROFILE SERIES v.S2 iCLASS8200 MORTISE LOCK





with Deadbolt $2,473.00 $2,631.00


with Deadbolt $2,556.00 $2,714.00


with Deadbolt $2,403.00 $2,561.00


with Deadbolt $2,484.00 $2,642.00









Notes: * Following levers not available in 32 & 32D: MA, MC, MH, MK, MM, MN, MO, MP, MQ, MS, MT, MU, MV, MX, MY, MZ, NS, NUSpecify hand when ordering.Consult catalog for available finishes & ordering information.



CD Tool Kits Price



LEVERS:Standard: A, B, E, F, J, L, P, WCoastal: G, R, S, Y*Studio Collection: Except for Gramercy, Wooster Square, & Grant Park SeriesFor Gramercy: RAG, RAL, RAM, RAS, RAW, RCM, REM, RGM – Add $138.00 to below 10BE/26D prices.For Wooster Square: H001, H002, H003, H004, H005, H006 – Add $138.00 to below prices.For Grant Park: H007, H008, H009, H010, H011 – Add $138.00 to below prices.


PROFILE SERIES v.S2 iCLASS80 SERIES EXIT DEVICEPrice Book No. 30 | September 1, 2017



(Not available with Studio & Coastal Levers and the A Lever) $66.0081 Cylinder to accept KESO & KESO F1 removable core - no core provided No Addition82 SARGENT KESO Security Cylinder (for existing systems) $78.00 /cylF182 SARGENT KESO Security Cylinder - Patented $78.00 /cyl83 SARGENT KESO Security Removable core cylinder (for existing systems) $111.00 /cylF183 SARGENT KESO Security Removable core cylinder - Patented $111.00 /cyl84 SARGENT KESO Security removable construction core cylinder See page CK-1885 Tactile Warning - Abrasive strip on push rail $89.0086 Tactile Warning - Abrasive coating on outside lever $41.0087 Tactile Warning - Abrasive strip on push rail & abrasive coating on outside lever $130.0091 Hard power (requires external 3267 power supply) $38.00BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE) Add $22.00 /cyl.DG1 Patented Degree DG1 Key System No AdditionDG160 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG163 Patented Degree DG1 Large Format Interchangeable Core Cylinder - Includes master keying charges $71.00DG164 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG2 Patented Degree DG2 Key System incorporating a locking sidebar $54.00/cyl.DG260 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG263 Patented Degree DG2 Large Format Interchangeable Core Cylinder - Includes master keying charges $125.00DG264 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG3 Patented Degree DG3 Key System incorporating a locking sidebar and UL437 listed $76.00/cyl.DG360 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG363 Patented Degree DG3 Large Format Interchangeable Core Cylinder - Includes master keying charges $147.00DG364 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2LC Less Cylinder -$83.00/cyl.PL SARGuide™ PL – Photoluminescent Coating – (Pushbar w/o Lexan Touchpad

- 19 option is supplied as standard) Require handing $335.00SC Schlage “C” Keyway cylinder, 0-bitted only (8800 Series Only) No AdditionSE Schlage “E” Keyway cylinder, 0-bitted only (8800 Series Only) No AdditionSG MicroShield™ an antimicrobial powder coat $76.00CPC Clear Powder Coat – Recommended for exit devices used in full exterior application and highly corrosive



PROFILE SERIES v.S2 iCLASS80 SERIES EXIT DEVICE



8800 Profile Series Rim Exit Device 03/04/09/10/10BOptions Function Trim Description 10BE/32D 10BL/20D/32S2IA 8877 ET x Lever Design iCLASS ONLY Rim Exit Device

with Cylinder Override $3,546.00 $3,599.00S2IK 8877 ET x Lever Design iCLASS and Keypad Rim Exit Device

with Cylinder Override $3,632.00 $3,685.00S2IA 8878 ET x Lever Design iCLASS ONLY Rim Exit Device

without Cylinder Override $3,472.00 $3,525.00S2IK 8878 ET x Lever Design iCLASS and Keypad Rim Exit Device



S2IA 8977 ET x Lever Design iCLASS ONLY Mortise Exit Devicewith Cylinder Override $3,828.00 $3,881.00

S2IK 8977 ET x Lever Design iCLASS and Keypad Mortise Exit Devicewith Cylinder Override $3,914.00 $3,967.00

S2IA 8978 ET x Lever Design iCLASS ONLY Mortise Exit Devicewithout Cylinder Override $3,753.00 $3,806.00

S2IK 8978 ET x Lever Design iCLASS and Keypad Mortise Exit Devicewithout Cylinder Override $3,839.00 $3,892.00

Notes: Specify hand when ordering.15 or 26D finishes are available on outside trim only, the exit evices will be supplied in 32D.14 or 26 Finishes are available on outside trim only, the exit devices will be supplied in 32 finish.Consult catalog for available lever designs, finishes, and ordering information



CD Tool Kits Price



Escutcheon: ET

LEVERS:Standard: A, B, E, F, J, L, P, WCoastal: G, R, S, YStudio Collection: Except for Gramercy, Wooster Square, and Grant Park SeriesFor Gramercy: RAG, RAL, RAM, RAS, RAW, RCM, REM, RGM – Add $160.00 to below prices.For Wooster Square: H001, H002, H003, H004, H005, H006 – Add $160.00 to below prices.For Grant Park: H007, H008, H009, H010, H011 – Add $160.00 to below prices.

IP-26INTELLIGENT WiFi & PoE SOLUTIONS

IN120WIFI & IN220 POE 10 LINE CYL. LOCKSPrice Book No. 30 | September 1, 2017


Options Series Function Credentials Reader Rose Lever Finish Handing Price

Select CommonOptions Description Price

LC Less Cylinder -$81.00/cyl.60 SARGENT Large Format Interchangeable Plastic Disposable Construction Core No addition70 Small Format interchangeable disposable plastic construction core

(Not available with J lever) No addition91 Hard power $38.00For complete list of options, please refer to page IP-27.

Select Function10G77 Key override $1,470.00

Select CredentialsIP HID iCLASS®, HID iCLASS SE® (SIO-enabled), HID iCLASS® Seos™,

HID MIFARE® SE, HID DESfire® EV1 SE, HID Prox®, NFC-enabled mobile phones N/CBIP All credentials supported by IP plus Bluetooth Smart support $100.00IPS All credentials supported by the IP option plus MIFARE Classic and DESfire EV1 $133.00BIPS All credentials supported by IPS plus Bluetooth Smart support $233.00CP FeliCa, HID Prox®, NFC-enabled mobile phones Available from Blackboard OnlyBCP All credentials supported by CP plus Bluetooth Smart support Available from Blackboard Only

Select ReaderB Black reader, black trim N/CW White reader, white trim N/CMB Black reader, metal trim $123.00MW White reader, metal trim $123.00

Select Rose

L Rose N/C

Select Lever

N/C

Select Handing

LH – Left Hand, LHR – Left Hand Reverse, RH – Right Hand, RHR – Right Hand Reverse

Select Finish10BE Dark Oxidized Satin Bronze - equivalent (613E)

N/C26D Satin chrome (626)03 Polished brass (605)04 Satin brass (606)09 Polished bronze (611)10 Satin bronze, clear powder coat (612)10B Oxidized satin bronze oil rubbed (613) $105.0010BL Oxidized satin bronze, clear powder coat14 Bright nickel, clear coated (618)15 Satin nickel, clear coated (619)20D Dark statuary bronze, clear powder coat26 Polished chrome (625)

________ IN120 _______ __________ _______ _______ _______ _______ _______ No Addition________ IN220 _______ __________ _______ _______ _______ _______ _______ $125.00Select from the following options to order IN120 and IN220 locks:

Build Your Cylindrical Lock Order String

Options Series Function Credentials Reader Rose Lever Finish Handing

SG- IN120 10G77 IP B L P 26D RH

Cylindrical Lock Order String Example

B J L P G – Gulfport Y – Yarmouth


IN120WIFI & IN220 POE 10 LINE CYL. LOCKSPrice Book No. 30 | September 1, 2017




and Schlage Full Size Interchangeable Core (no cylinder provided) No AdditionSG MicroShield™ an antimicrobial powder coat finish $62.00WBS Wrought Box Strike No AdditionCPC Clear Powder Coat over 26/26D. All orders will continue to be handled as a“special”when CPC is ordered. $58.00

Note: Options in bold text are available to ASSA ABLOY Access Control Partners.


IN120WIFI & IN220 POE7900MORTISE LOCKSPrice Book No. 30 | September 1, 2017


Select Common Options Description PriceLC Less Cylinder -$83.00/cyl.60 SARGENT Large Format Interchangeable Plastic Disposable Construction Core No addition70 Small Format interchangeable disposable plastic construction core

(Not available with J lever) No addition91 Hard power $38.00SG MicroShield™ an antimicrobial powder coat $62.00

For complete list of options, please refer to page IP-30.

Select Function7976 Key override and deadbolt $1,512.007978 Key override and no deadbolt $1,472.007977 Deadbolt and no key override $1,429.007979 No deadbolt and no key override $1,389.00

Select ReaderB Black reader, black trim N/CW White reader, white trim N/CMB Black reader, metal trim $123.00MW White reader, metal trim $123.00Select Rose

N/C

$138.00

Premium (Gramercy, Grant Park, and Wooster Square Series)

N/C

The levers shown here are some of our most popular styles from the Studio Collection. Refer to the catalog for complete range ofavailable levers.

Build Your Mortise Lock Order String

O

RAS

ND NJ

REM

E2 E3 E4LN





MD MJMC

Select Lever

Following levers not available in 32 & 32D: MA, MC, MH, MK, MM, MN, MO, MP, MQ, MS, MT, MU, MV, MX, MY, MZ, NS, NU


IN120WiFi & IN220 PoE 7900MORTISE LOCKSPrice Book No. 30 | September 1, 2017


Select Handing



SG- IN120 7976 IP B L P 26D RH

Mortise Lock Order String Example

Select Finish10BE Dark Oxidized Satin Bronze – equivalent (613E) N/C26D Satin chrome (626)03 Polished brass (605)04 Satin brass (606)09 Polished bronze (611)10 Satin bronze, clear powder coat (612)10B Oxidized satin bronze oil rubbed (613)10BL Oxidized satin bronze, clear powder coat $158.0014 Bright nickel, clear coated (618)15 Satin nickel, clear coated (619)20D Dark statuary bronze, clear powder coat26 Polished chrome (625)32 Polished stainless steel (629)32D Satin stainless steel (630)




Options Description Price

10 SARGENT Signature Key System $54.00 /cyl11 SARGENT XC Key System (not available with 10, 22, SC, SE) No addition1160 Sargent XC Large Format Interchangeable Plastic Disposable Construction Core No addition1163 Sargent XC Large Format Interchangeable Core Cylinder - Includes masterkeying charges $71.001164 Sargent XC Large Format Interchangeable Construction Core Cylinder See CK-21170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-211737P Small Format interchangeable core - to accept 7 pin XC permanent core $63.00 / cyl.21 SARGENT Construction Key System (lost ball) - for new systems est. since 5/1/96 $16.00 /cyl22 SARGENT Construction Key System (split key) - for pre-est. split key systems only $32.00 /cyl23 Flat 4-7/8" ANSI Strike No addition36 6 Lobe head security screws $22.0037 Spanner head security screws $16.0060 SARGENT Large Format Interchangeable Plastic Disposable Construction Core No addition63 SARGENT Large Format IC Cylinder includes master and grandmaster keying charge $71.00 /cyl.64 SARGENT Large Format Interchangeable Construction Core Cylinder See CK-26573 Small Format 6-Pin uncombinated core $53.00 /cyl.65737P Small Format 7-Pin uncombinated core $53.00 /cyl.70 Small Format Interchangeable disposable plastic construction core No addition72 Small Format Interchangeable 6-Pin construction core (7-Pin with 11 option) See page CK-273 Small Format Interchangeable 6-Pin core $63.00 /cyl.737P Small Format Interchangeable 7-Pin core $63.00 /cyl.75 TactileWarning - Milled on backside of inside lever (Not available with Studio & Coastal Levers and the A Lever) $66.0076 TactileWarning - Milled on backside of outside lever (Not available with Studio & Coastal Levers and the A Lever) $66.0077 TactileWarning - Milled on backside of both levers (Not available with Studio & Coastal Levers and the A Lever) $132.0081 Cylinder to accept KESO & KESO F1 removable core - no core provided No Addition82 SARGENT KESO Security Cylinder (for existing systems) $78.00 /cylF182 SARGENT KESO Security Cylinder - Patented $78.00 /cyl83 SARGENT KESO Security Removable core cylinder (for existing systems) $111.00 /cylF183 SARGENT KESO Security Removable core cylinder - Patented $111.00 /cyl84 SARGENT KESO Security removable construction core cylinder See page CK-1885 Tactile Warning - Abrasive coating on inside lever $41.0086 Tactile Warning - Abrasive coating on outside lever $41.0087 Tactile Warning - Abrasive coating on both levers $82.00BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE) Add $22.00 /cyl.DG1 Patented Degree DG1 Key System No AdditionDG160 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG163 Patented Degree DG1 Large Format Interchangeable Core Cylinder - Includes master keying charges $71.00DG164 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG2 Patented Degree DG2 Key System incorporating a locking sidebar $54.00/cyl.DG260 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG263 Patented Degree DG2 Large Format Interchangeable Core Cylinder - Includes master keying charges $125.00DG264 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2DG3 Patented Degree DG3 Key System incorporating a locking sidebar and UL437 listed $76.00/cyl.DG360 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No additionDG363 Patented Degree DG3 Large Format Interchangeable Core Cylinder - Includes master keying charges $147.00DG364 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary keyed construction cores See CK-2LC Less Cylinder -$83.00/cyl.OBS Open Back Strike $70.00SG MicroShield™ an antimicrobial powder coat finish $62.00CPC Clear Powder Coat over 26/26D. $58.00

All orders will continue to be handled as a “special” when CPC is ordered.



IN120WIFI& IN220POE8200MORTISE LOCKSPrice Book No. 30 | September 1, 2017





Select Function82276 Key override and deadbolt $1,686.0082278 Key override and no deadbolt $1,646.0082277 Deadbolt and no key override $1,603.0082279 No deadbolt and no key override $1,563.00


Select Rose

N/C

$138.00


N/C



O

RAS

ND NJ

REM

E2 E3 E4LN

Select Lever

MD MJMC








Select Handing



SG- IN120 82276 IP B L P 26D RH

Mortise Lock Order String Example



IN120WIFI& IN220POE80SERIESEXITDEVICESPrice Book No. 30 | September 1, 2017





Select Function8877 Rim exit device, key override $2,793.008878 Rim exit device, no key override $2,710.008977 Mortise lock exit device, key override $3,354.008978 Mortise lock exit device, no key override $3,271.00


Select Escutcheon

ET Control N/C

$160.00


N/C


RAS

ND NJ

REM

Select Lever

MD MJMC


HID MIFARE® SE, HID DESfire® EV1 SE, HID Prox®, NFC-enabled mobile phones N/CBIP All credentials supported by IP plus Bluetooth Smart support$100.00IPS All credentials supported by the IP option plus MIFARE Classic and DESfire EV1 $133.00BIPS All credentials supported by IPS plus Bluetooth Smart support $233.00CP FeliCa, HID Prox®, NFC-enabled mobile phones Available from Blackboard OnlyBCP All credentials supported by CP plus Bluetooth Smart support Available from Blackboard Only





IN120WIFI& IN220POE80SERIESEXITDEVICESPrice Book No. 30 | September 1, 2017


Select Handing


Options Series Function Credentials Reader Escutcheon Lever Finish Handing

SG- IN120 8877 IP B ET MD 26D RH

Exit Device Order String Example

Select Finish10BE Dark Oxidized Satin Bronze – equivalent (613E) N/C32D Satin Stainless Steel (630)03 Polished brass (605)04 Satin brass (606)09 Polished bronze (611)10 Satin bronze, clear powder coat (612) $53.0010B Oxidized satin bronze oil rubbed (613)10BL Oxidized satin bronze, clear powder coat20D Dark statuary bronze, clear powder coat32 Polished stainless steel (629)


IN120WIFI& IN220POE80SERIESEXITDEVICEPrice Book No. 30 | September 1, 2017




- 19 option is supplied as standard) Require handing $335.00SC Schlage C Keyway cylinder, 0-bitted (8800 Series Only) No AdditionSE Schlage E Keyway cylinder, 0-bitted (8800 Series Only) No AdditionSG MicroShield™ an antimicrobial powder coat $76.00

CPC Clear Powder Coat – Recommended for exit devices used in full exterior application and highly corrosiveareas with 32 and 32D finishes. Discount Do Not Apply $198.00


IN120 WIFI & IN220 POEFM7300 SERIES MULTI-POINT LOCKS






Select FunctionFM 73277 Deadbolt and no key override $3,731.00


Select Rose

N/C

$138.00


N/C



O

RAS

ND NJ

REM

E2 E3 E4LN

Select Lever

MD MJMC






IN120 WIFI & IN220 POEFM7300 SERIES MULTI-POINT LOCKSPrice Book No. 30 | September 1, 2017


Select Handing



SG- IN120 FM73277 IP B L P 26D RH

Multi-Point Lock Order String Example



IN120 WIFI & IN220 POEFM7300 SERIES MULTI-POINT LOCKS








IN120 REPLACEMENT PARTSPrice Book No. 30 | September 1, 2017


IN120/IN220 Replacement Parts Finish03/04/09/10/10B,

Catalog # Description 10BE/26D 10BL/14/15/20D/26

*IN-120-EM01-IP-B Reader Assemby, HID 125kHz Prox, and 13.56 MHz Prox $520.00 (Black plastic)

*IN-120-EM01-IP-W Reader Assemby, HID 125kHz Prox, and 13.56 MHz Prox $520.00 (White plastic)

*IN-120-EM01-IP-MB Reader Assemby, HID 125kHz Prox, and 13.56 MHz Prox- Black Plastic & Metal Trim $577.00 $636.00

*IN-120-EM01-IP-MW Reader Assemby, HID 125kHz Prox, and 13.56 MHz Prox- White Plastic & Metal Trim $577.00 $636.00

*IN-120-EM01-BIP-B Reader Assemby, HID 125kHz Prox, and 13.56 MHz Proxwith Bluetooth Smart Support $620.00 (Black plastic)

*IN-120-EM01-BIP-W Reader Assemby, HID 125kHz Prox, and 13.56 MHz Proxwith Bluetooth Smart Support $620.00 (White plastic)

*IN-120-EM01-BIP-MB Reader Assemby, HID 125kHz Prox, and 13.56 MHz Prox– Black Plastic & Metal Trim with Bluetooth Smart Support $677.00 $736.00

*IN-120-EM01-BIP-MW Reader Assemby, HID 125kHz Prox, and 13.56 MHz Prox– White Plastic & Metal Trim with Bluetooth Smart Support $677.00 $736.00

*IN-120-EM01-IPS-B Reader Assemby, HID 125kHz Prox, and 13.56 MHz Prox $649.00 (Black plastic)

*IN-120-EM01-IPS-W Reader Assemby, HID 125kHz Prox, and 13.56 MHz Prox $649.00 (White plastic)

*IN-120-EM01-IPS-MB Reader Assemby, HID 125kHz Prox, and 13.56 MHz Prox- Black Plastic & Metal Trim $706.00 $765.00

*IN-120-EM01-IPS-MW Reader Assemby, HID 125kHz Prox, and 13.56 MHz Prox- White Plastic & Metal Trim $706.00 $765.00

*IN-120-EM01-BIPS-B Reader Assemby, HID 125kHz Prox, and 13.56 MHz Proxwith Bluetooth Smart Support $749.00 (Black plastic)

*IN-120-EM01-BIPS-W Reader Assemby, HID 125kHz Prox, and 13.56 MHz Proxwith Bluetooth Smart Support $749.00 (White plastic)

*IN-120-EM01-BIPS-MB Reader Assemby, HID 125kHz Prox, and 13.56 MHz Prox– Black Plastic & Metal Trim with Bluetooth Smart Support $806.00 $865.00

*IN-120-EM01-BIPS-MW Reader Assemby, HID 125kHz Prox, and 13.56 MHz Prox– White Plastic & Metal Trim with Bluetooth Smart Support $806.00 $865.00

IN-120-EM03 WiFi Controller Assembly $520.00*IN-120-EM04 Mounting Plate Assembly $87.00IN-EM02-B Inside Escutcehon Assembly with Privacy Button $59.00 (Black plastic)

IN-EM02-W Inside Escutcehon Assembly with Privacy Button $59.00 (White plastic)

IN-EM02-MB Inside Escutcehon Assembly with Privacy Button- Black Plastic & Metal Trim $115.00 $174.00

IN-EM02-MW Inside Escutcehon Assembly with Privacy Button- White Plastic & Metal Trim $115.00 $174.00

IN-220-EM03 PoE Controller Assembly $645.00

NOTE: *Parts suitable for IN-120 and IN-220 products.

INTELLIGENTWiFi&PoESOLUTIONS TABLEOFCONTENTS - Access...

Documents

Transcript of INTELLIGENTWiFi&PoESOLUTIONS TABLEOFCONTENTS - Access...