INSTRUCTIONS FOR ACTIVATING YOUR NAVIGATION SYSTEM 1 …
2
WRITE DOWN YOUR VIN GET YOUR EXCLUSIVE REQUEST CODE Locate the following three buttons on the Center Control Panel: A. Driver-side Temp Up B. Driver-side Temp Down C. Front Defrost Hold all three buttons simultaneously for five seconds. PLEASE NOTE: Button location may vary by vehicle. Next, the following screen will appear. Select “VP3 Activate Navigation.” WRITE DOWN YOUR SOFTWARE VERSION Your VIN can be found on your Proof of Registration and also on the inside left corner of your dashboard, under the front windshield. Your Software Version can be found by following these steps: A. Press “Apps” and select “Settings” OR Press “Settings” B. Scroll to page two of the “Settings” list by using the white down arrow. C. Select the “System Information” option YOUR VIN INSTRUCTIONS FOR ACTIVATING YOUR NAVIGATION SYSTEM YOUR SOFTWARE VERSION: (INCLUDE THE DOTS) Now you will see a screen that provides the necessary “Request Code.” This is your exclusive 22-digit alphanumeric code. Write your Request Code below. Dashes are included. You will also need your vehicle’s VIN (above). YOUR REQUEST CODE: 1 2
Transcript of INSTRUCTIONS FOR ACTIVATING YOUR NAVIGATION SYSTEM 1 …
WRITE DOWN YOUR VIN
GET YOUR EXCLUSIVEREQUEST CODELocate the following three buttons on the Center Control Panel:
A. Driver-side Temp UpB. Driver-side Temp DownC. Front Defrost
Hold all three buttons simultaneously for five seconds.PLEASE NOTE: Button location may vary by vehicle.
Next, the following screen will appear.Select “VP3 Activate Navigation.”
WRITE DOWN YOURSOFTWARE VERSION
Your VIN can be found on your Proof of Registration and also on the inside left corner of your dashboard, under the front windshield.
Your Software Version can be found by following these steps:
A. Press “Apps” and select “Settings” OR Press “Settings”B. Scroll to page two of the “Settings” list by using the white down arrow.C. Select the “System Information” option
YOUR VIN
INSTRUCTIONS FOR ACTIVATING YOUR NAVIGATION SYSTEM
YOUR SOFTWARE VERSION: (INCLUDE THE DOTS)
Now you will see a screen that provides the necessary “Request Code.”This is your exclusive 22-digit alphanumeric code. Write your Request Code below. Dashes are included. You will also need your vehicle’s VIN (above).
YOUR REQUEST CODE:
1
2
GO ONLINE FOR YOUR PERSONAL ACTIVATION CODEVisit chryslergroup.navigation.com/activateRA3
You will need to input your Request Code,VIN and Software Version.
Please be sure to have your credit card ready.* Once you add the activation product to your cart, proceed to check out. You must input your Request Code, VIN and Software Version before completing your purchase, so have those numbers ready. You will receive an Activation Code on screen and via email after you have completed your purchase.
If you need assistance, please call the Contact Center at 1-866-471-7444.
ACTIVATE YOUR NAVIGATION SYSTEMReturn to your vehicle to input the Activation Code.
Select “OK” on the screen.
PLEASE NOTE: If you have exited this screen, repeat Step 1 to return to the screen. You will then receive a different RequestCode, but please ignore it. Your Activation Code will still work.
Now the following screen will appear. Enter the Activation Code exactly as sent to you,with the dashes.Then select “OK.”
YOUR EXCLUSIVE ACTIVATION CODE:
* The standard MSRP is $595. Sales tax may apply. © 2016 HERE. © 2016 FCA US LLC All rights reserved. Chrysler, Jeep, Dodge, Ram, SRT, Mopar and Uconnect are registered trademarks of FCA US LLC.
3
4
Congratulations, your navigation system is activated.You will see a “Nav” icon at the bottom of the screen. This means the system is available for use.
PLEASE NOTE: It may take about 10 minutes of unobstructed satellite signal for the navigation system to be fully functional. You will also want to select the “Nav” icon twice to ensure your navigation system is activated.
