NECKLACEFANCY SQUARE

INSTRUCTION PACKAGE XILION BEAD

2 /12 WWW.CREATE-YOUR-STYLE.COM

4 mm A = 55 cmB = 52 cmC = 55.5 cmD = 47.5 cmE = 55 cm

SWAROVSKI ELEMENTS Supplies & Tools

Stringing

Wiring

Article Product Group Article No. Amount Size Color Color Code

Fancy Stones 4437 1 pc. 30 mm Crystal Silver Shade 001 SSHA

Beads 5328 16 pcs. 3 mm Jet Hematite 2x 280 HEM2

Beads 5328 68 pcs. 4 mm Crystal Satin 001 SAT

Beads 5328 38 pcs. 4 mm Jet Hematite 2x 280 HEM2

Beads 5328 3 pcs. 6 mm Jet Hematite 2x 280 HEM2

Supplies

Cord, grey, 4 mm, 2.65 mNylon thread, transparent, 0.3 mm, 10 cmWire, black, 0.7 mm, 5 m

Tools

Chain nose pliersLighterPinsRound nose pliersScissorsSide cutterTape

Level of design: INTERMEDIATE

Have also a look at the text instruction at the last page!

STEP 1

4 mm A = 55 cmB= 52 cmC= 55.5 cmD= 47.5 cmE= 55 cm

A = 55 cmB = 52 cmC = 55.5 cmD

= 47.5 cm

E = 55 cm

INSTRUCTION PACKAGE XILION BEADNECKLACE FANCY SQUARE

3 /12 WWW.CREATE-YOUR-STYLE.COM

A

B

C

D

E

A

B

C

E

D

4 /12 WWW.CREATE-YOUR-STYLE.COM

Step 3Step 3

Step 2

24 cm x10

Step 3

0.7 mm

STEP 2

0.7 mm 24 cm x10

STEP 3

1:2

p

Repeat step x9:

Scale 1:2

STEP 4

5 /12 WWW.CREATE-YOUR-STYLE.COM

x2

Step 5

10 cm

1:1

x10.7 mm

STEP 5

0.7 mm 10 cm

Scale1:1

Repeat step 5 - 6 x2:

STEP 6

Repeat step 5Repeat step 5 - 6 x2:

x2

x1

Scale 1:2

6 /12 WWW.CREATE-YOUR-STYLE.COM

Step 7

1:1

Step 8

12 cm

Step 8888eepp 8ep

0.7 mm

STEP 7

0.7 mm 12 cm

STEP 9

Repeat step 6

Scale 1:1

STEP 8

7 /12 WWW.CREATE-YOUR-STYLE.COM

Step 0

12 cm0.7 mm

STEP 10

0.7 mm 12 cm

STEP 11

8 /12 WWW.CREATE-YOUR-STYLE.COM

0.3 mm 10 cm

x13

10 cm

Step 14

0.7 mm

Step 12

Repeat step 6

x13

10 cm

Repeat step 6

STEP 12

STEP 13

0.3 mm

STEP 14

10 cm0.7 mm

9 /12 WWW.CREATE-YOUR-STYLE.COM

1:2

Step 15

x1 x10 x3

STEP 15

STEP 16

x3x1 x10

Scale 1:2

10 /12 WWW.CREATE-YOUR-STYLE.COM

Step 17

Repeat step x9

Repeat step 14 x10:

8x 10 cm1:1

0.7 mm0.7 mm 8 x 10 cm Scale 1:1

Repeat step x9

STEP 17 Repeat step 14 x10:

11 /12 WWW.CREATE-YOUR-STYLE.COM

1:2

Scale 1:2

12 /12 WWW.CREATE-YOUR-STYLE.COM

STEP 1: Cut a 4 mm cord into fi ve lengths A = 55 cm, B = 52 cm, C = 55.5 cm, D=47.5 cm and E = 55 cm. Pierce pins into the closely placed cords, as shown in the illustrations in this step

STEP 2: Cut ten 24 cm pieces of 0.7 mm wire. Wrap one piece of wire 8 times around round nose pliers and then bend it as shown in the illustrations.

STEP 3: Bend a double loop with the help of round nose pliers as shown in the illustrations and cut off the remaining end with a side cutter.

STEP 4: Pull the wire onto one of the cord ends as depicted in the illustrations, wrap the longer end around the cord tightly two times and cut of the rest of the wire off with a side cutter. Repeat this step nine more times for the rest of the cord ends.

STEP 5: Cut 10 cm of 0.7 mm wire and bend a double loop at one of the ends. Bend the loop at a right angle using pliers as shown.

STEP 6: Replace the pin at the top with the looped wire that was made in step 5. Bend a loop as done in step 5 to close the other end of the wire. Repeat steps 5 and 6 to replace the middle two pins. The lower two pins will later be removed.

STEP 7: Cut 12 cm of 0.7mm wire and bend it in the middle. Bend the closed end to form a loop with round nose pliers as shown in the illustrations. Bend another loop in the other direction.

STEP 8: Attach the loop formed in previous step as shown in the illustration. Wrap the wire ends around the cord as shown in the magnifi er in this step. Replace the pins with these wire ends by piercing in through the cords. Cut off one of the wire ends with a side cutter leaving one end long.

STEP 9: Repeat step 6 to make a double loop on the long wire end.

STEP 10: Cut 12 cm of 0.77 mm wire and bend a double loop on to the end with round nose pliers. Now bend a bigger loop on this wire end as shown in the illustration in this step.

STEP 11: Remove the pin and attach the wire loop created in the previous step as shown in the illustrations in this step. In order to attach this loop onto the cord you have to wrap the wire once more around the cord as shown in the magnifi er in this step and then pierce through all the other cords with this wire end.

STEP 12: Repeat step 6 to make a double loop at the end of the wire shown.

STEP 13: Cut 10 cm of 0.3 mm nylon thread and melt a ball at one end with a lighter. Insert 13 Swarovski XILION Beads article 5328 3 mm Jet Hematite onto the nylon thread. Wrap this Bead string around the Fancy Stones art. 4437 and go through the fi rst Xilion Bead 5328. Melt the nylon thread end into a ball as previously done.

STEP 14: Cut 10 cm of 0.7 mm wire and bend a loop at one end of this wire. Slide on 1 XILION Bead art. 5328 3 mm, 10 XILION Beads 4 mm and 3 XILION Beads 6 mm (all in Jet Hematite). Make a loop at the other end and cut off the excess wire with a side cutter.

STEP 15: Open the loop of the Bead string created in previous step with chain nose pliers and insert it in through the crystal loop created in step 13 and close it as shown in the illustration in this step.

STEP 16: Open and insert the 5 mm jump ring through the bead string and through the left and right closings of the cords and then close it with chain nose pliers.

STEP 17: Cut ten 10 cm pieces of 0.7 mm wire and repeat step 14 ten more times. Open one of the loops with chain nose pliers and hang it onto the cord end and close the loop. Repeat this step 9 more times to attach all the other crystal strands.

CREATE YOUR STYLE with SWAROVSKI ELEMENTS Instruction Package XILION BeadNecklace Fancy Square