INSTRUCTION PACKAGE

“HELIOS”PENDANT

2 /7 WWW.CREATE-YOUR-STYLE.COM

Step 2

INSTRUCTION PACKAGE

PENDANT “HELIOS”

STEP 1

STEP 2

SWAROVSKI ELEMENTS Supplies & Tools

Article Product Group Article No. Amount Size Color Color Code

Crystal Pearls 5810 2 pcs. 4 mm Crystal Dark Grey Pearl 001 617

Crystal Pearls 5821 1 pc. 11 x 8 mm Crystal Dark Grey Pearl 001 617

Pendants 6040 1 pc. 40 mm Indicolite 379

Supplies

Chain, silver, 1 mCord, grey, 1 mm, 2 m3x Head pin, silver1x Jump ring, silver, 12 mmSatin ribbon (fl at), grey with white dots,

8 mm, 30 cm

Tools

Flat nose pliersRound nose pliersScissorsSide cutterTape

Level of design: BEGINNERS

Have also a look at the text instruction at the last page!

Wiring

Knotting

3 /7 WWW.CREATE-YOUR-STYLE.COM

30 cm

2.5 cm

2.5 cm

1m x21 m 1mm

p

STEP 3

STEP 4

Repeat

5 cm

Repeat

4 /7 WWW.CREATE-YOUR-STYLE.COM

2 cm

Step 5

Step 6

Repeat step x1

STEP 5

STEP 6

Repeat step x1

5 /7 WWW.CREATE-YOUR-STYLE.COM

STEP 7

Step 7

6 /7 WWW.CREATE-YOUR-STYLE.COM

Step 7

7 /7 WWW.CREATE-YOUR-STYLE.COM

STEP 1: Slide one Swarovski Crystal Pearl article 5821 11 x 8 mm Crystal Dark Grey Pearl onto a head pin and form

a loop. Cut off excess wire.

STEP 2: Open a 12 mm jump ring and slide on the Crystal Pearl headpin and one Swarovski Pendant article 6040

40 mm Indicolite as shown in the illustrations.

STEP 3: Cut a fl at 30 cm ribbon and tie a bow around the Pendant. Trim both ends to 2.5 cm as shown.

STEP 4: Cut a 1 m chain and two 1 m cords, place them together and attach one side with tape. Begin braiding them

together leaving 5 cm at the top and bottom upbraided.

STEP 5: Tie a knot with both ends as indicated in the illustrations and cut off the cords and the chain using a side

cutter and scissors leaving 2 cm on ends.

STEP 6: Slide one Swarovski Crystal Pearl article 5810 4 mm Crystal Dark Grey Pearl onto a head pin and form a loop.

Repeat this step once. Attach both Crystal Pearls headpins onto the chain ends as shown.

STEP 7: Open the 12 mm jump ring that is attached to the Swarovski Pendant with the bow and attach it onto center

of braided cord and chain as shown in the illustrations.

INSTRUCTION PACKAGE

PENDANT “HELIOS”