Instruction Manual for RTN 620 (HW MW).ppt
-
date post
10-Oct-2015 -
Category
Documents
-
view
204 -
download
33
Transcript of Instruction Manual for RTN 620 (HW MW).ppt
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
1/37
HUAWEI TECHNOLOGIES CO., LTD. Page 1
Configuring RTN 600 Series (1+0, 4/8/16E1)
(Instruction Manual)
HUAWEI TECHNOLOGIES CO., LTD.
www.huawei.com
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
2/37
HUAWEI TECHNOLOGIES CO., LTD. Page 2
1. Setting of IP address on your Laptop
1.1 Right Click on
icon of Local Area
Connection (LAN)
1.2 Click on Properties
1.3 Go to Internet
Protocol (TCP/IP)
then clickProperties
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
3/37
HUAWEI TECHNOLOGIES CO., LTD. Page 3
1.4 Type in IP Address then click on OK
ALWAYS USE THE FOLLOWING:IP Address: 129.9.0.12
Subnet mask: 255.255.0.0
(No need to filed-up the Default gateway
and DNS)
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
4/37HUAWEI TECHNOLOGIES CO., LTD. Page 4
2. Open the Web LCT application (pre-installed)
3. Type in your user name and password to Login
Username: admin
Password: T2000
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
5/37HUAWEI TECHNOLOGIES CO., LTD. Page 5
4. To Search for a NE (Network Element), click NE Search
4.1 Click on NE SEARCH first
before you Add NE
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
6/37HUAWEI TECHNOLOGIES CO., LTD. Page 6
Click on NE Search
first to Add NE
4.2 Click on SEARCH
Note: Domain is automatically
set (no need to input)
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
7/37HUAWEI TECHNOLOGIES CO., LTD. Page 7
4.3 Click Add NE
Web LCT will search and detect available NEs
4.4 Available NE will appear
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
8/37
HUAWEI TECHNOLOGIES CO., LTD. Page 8
4.5 Then click on OK
4.6 After pressing OK, all
available NE will be
added on the screen
(Communication Status
will be NORMAL)
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
9/37
HUAWEI TECHNOLOGIES CO., LTD. Page 9
5. To Login into the NE
5.1 Highlight the NE you want to login
5.2 Click on NE Login
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
10/37
HUAWEI TECHNOLOGIES CO., LTD. Page 10
5.3 Enter Password:
password
5.4 Then press Apply and OK
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
11/37
HUAWEI TECHNOLOGIES CO., LTD. Page 11
6. To configure the NE, check if the Login Status then click on NE Explorer
Status will be
already Logged in
6.2 Click on NE
Explorer
6.1 Highlight the NE you
want to configure
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
12/37
HUAWEI TECHNOLOGIES CO., LTD. Page 12
7. Web LCT will automatically detect the available board/card on the Slot Layout
(with color )8. To install the cards, right click on the board then pressed ADD
8.1 Right click on
each available
board then press
ADD
(color will change to
GREEN)`
Note:
PXC Card should be
installed FIRST
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
13/37
HUAWEI TECHNOLOGIES CO., LTD. Page 13
9. Color will change to GREEN after installing all the available boards in the Slot
Layout
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
14/37
HUAWEI TECHNOLOGIES CO., LTD. Page 14
10. Configuring NE attribute Site Name
10.1 Highlight NE
Attribute10.2 Double click
box under NAME
and type SITE
NAME. Then click
apply and query.
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
15/37
HUAWEI TECHNOLOGIES CO., LTD. Page 15
10.3 Click Modify
NE ID and a dialog
box will appear.
10.4 Type Site ID
based on plan
assigned by TNP.
NOTE: ID is aunique number.
Modifying NE ID
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
16/37
HUAWEI TECHNOLOGIES CO., LTD. Page 16
Modifying NE ID
10.5 After you
enter the new ID
and click OK, a
warning sign willappear. Click OK.
10.6 Close this
window.
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
17/37
HUAWEI TECHNOLOGIES CO., LTD. Page 17
Modifying NE ID
10.8 Click Delete NE to register
the NEW NE with modified ID
10.7 Ensure the right NE to be deleted
is highlighted before you go on process
of deleting.
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
18/37
HUAWEI TECHNOLOGIES CO., LTD. Page 18
Modifying NE ID
10.9 Click OK
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
19/37
HUAWEI TECHNOLOGIES CO., LTD. Page 19
Modifying NE ID
10.10 Click NE SEARCH and a
dialog box will appear.
10.11 Click SEARCH
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
20/37
HUAWEI TECHNOLOGIES CO., LTD. Page 20
Modifying NE ID
10.12 A new NE will appear. Click
or highlighted the new NE.
10.13 Click ADD NE.
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
21/37
HUAWEI TECHNOLOGIES CO., LTD. Page 21
10.14 Click Ok
10.15 A new NE was
added to the list.
10.16 Close dialog box
Modifying NE ID
NE L i d ti d NE C fi ti
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
22/37
HUAWEI TECHNOLOGIES CO., LTD. Page 22
NE Login and continued NE Configuration
10.17 A new NE was added to the list. Then higlighted the new NEW NE.
10.18 Click on NE LOGIN and adialog box will appear.
10.19 Enter the Password: password.
10.20 Click OK
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
23/37
HUAWEI TECHNOLOGIES CO., LTD. Page 23
11. NE Cross-Connection Configuration
11.1 Highlight the NE Name
11.2 Scroll down the Configuration Menu
11.3 Click Cross-Connection Configuration.
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
24/37
HUAWEI TECHNOLOGIES CO., LTD. Page 24
Add attributes.
11.4 Right click on NEWand a dialog box will appear.
Entering attributes value by scroll down available choices: level, direction, source,
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
25/37
HUAWEI TECHNOLOGIES CO., LTD. Page 25
11.5a Choose VC12 for LEVEL.
11.5b Choose Bidirectional for DIRECTION.11.5c Choose available IF or PH board and available slot installed as your SOURCE.
11.5d Select your desired timeslot range for SOURCE (example: 1, 2, . . 8 . . 16; 1-8; or 1-16)
11.5e Choose available IF or PH board and available slot installed as your DESTINATION.
11.5f Select your desired timeslot range for SINK (example: 1, 2, . . 8 . . 16; 1-8; or 1-16)
te g att butes a ue by sc o do a a ab e c o ces e e , d ect o , sou ce,
destination, and timeslot. After entering required data, click OK and Apply.
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
26/37
HUAWEI TECHNOLOGIES CO., LTD. Page 26
Cross-connection appear
11.6 Click on QUERY after cross-connection appear.
12 C fi i O d i
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
27/37
HUAWEI TECHNOLOGIES CO., LTD. Page 27
12. Configuring Orderwire
12.1 Highlight Orderwire
12.2 Enter assigned 3-digit Phone Number
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
28/37
HUAWEI TECHNOLOGIES CO., LTD. Page 28
12.3 Highlight available Orderwire port located in the left side
12.4 Click this arrow to transfer the
available port into selected Orderwire port
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
29/37
HUAWEI TECHNOLOGIES CO., LTD. Page 29
12.5 Highlight the selected Orderwire port in the right side.
12.6 Click APPLY and then QUERY.
13 Configuring the IDU IF1A board
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
30/37
HUAWEI TECHNOLOGIES CO., LTD. Page 30
13. Configuring the IDU IF1A board
13.1 Highlight IF1A
13.2 Scroll down Configuration Menu and highlight IF Interface
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
31/37
HUAWEI TECHNOLOGIES CO., LTD. Page 31
13.3 In Radio Work Mode
(for a 16E1), choose no.5:
16E1, 28MHz, QPSK
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
32/37
HUAWEI TECHNOLOGIES CO., LTD. Page 32
13.4 Click on APPLY then
QUERY
14. Configuring the ODU (Frequency Assignment)
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
33/37
HUAWEI TECHNOLOGIES CO., LTD. Page 33
g g ( q y g )
14.1 Highlight 15-ODU
14.2 Highlight ODU Interface
14. 3. Input the Transmit Frequency (KHZ)Make sure you are in Radio Freq Attributes.
14. 4. Click on APPLY then QUERY
15. Configuring the ODU(Transmit Power)
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
34/37
HUAWEI TECHNOLOGIES CO., LTD. Page 34
15.2 Input the Transmit Power (dBm)(Refer to link budget)
15.1 Click Power Attributes
15.3 Click on APPLY then QUERY
16. Configuring the ODU(Transmission Status)
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
35/37
HUAWEI TECHNOLOGIES CO., LTD. Page 35
16.2 Change mute to UNMUTE
16.3 Click on APPLY then QUERY
16.1 Click Advanced Attributes
17. Monitor the RSL level while doing the Panning of Antenna
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
36/37
HUAWEI TECHNOLOGIES CO., LTD. Page 36
Monitor the Actual Receive Power (RSL level)
while doing Antenna Panning.
(Check the link budget for the target value)
-
5/20/2018 Instruction Manual for RTN 620 (HW MW).ppt
37/37
HUAWEI TECHNOLOGIES CO., LTD. Page 37
Thank You
www.huawei.com