Instruciones de armado kit VC TAM 2C 1/72 Tactical Models
-
Upload
cibersocrates -
Category
Documents
-
view
13 -
download
0
description
Transcript of Instruciones de armado kit VC TAM 2C 1/72 Tactical Models
-
www.tacticalmodels.com.ar
Instrucciones de Armado / Assembly Instructions
Gracias por adquirir nuestro kit! Recomendamos leer este instructivo y visitar nuestra pgina para mas referencias fotogrficas y consejos antes de comenzar.
Thanks for purchase our kit! We recommend read this instruction and visit or web page for more photo references and tips before start the ensamble.
Consejo / Tip
Lije las superficies que sern pegadas para uniones mas firmes.
Sanding the gluing surfaces before glue it improve the bonding results.
Pieza de latn fotograbadoPhotoetched brass part
Posicin de las piezas pequeas en la torretaPosition of small parts on turret
Pegamento / Glue
Recomendamos pegar las piezas con adhesivo epoxi de dos componentes.
We recommend a two components epoxi adhesive for best results
Coloque la pieza de acetato transparente en el eje de la torreta para evitar el rozamiento y que gire suavemente.
Place this plastic piece in the turret axis for a smooth rotation and prevent the friction
Arandela de metalSteel washer
Imn de neodimioNeodymium magnet
Arandela de metalSteel washer
Lijar / SandingAlgunas partes necesitan ser lijadas para un correcto encastre, recuerde volver a imprimar la parte que quede expuesta antes de pintar.
If you need sanding a part in order to fit properly dont forget apply a primer in the exposed area before paint.
Enmasillado / Filling
Para una terminacin de calidad recomendamos enmasillar las uniones entre partes con masilla epoxy o polister y una vez seco lijar.
For a quality finish we recomend fill the joins with polyester o epoxi putty and sanding once cured.
Fijar el APU (Auxiliary Power Unit) pegndolo en la base y con ayuda de una pieza de latn doblada en forma de V.Paste de Auxiliary Power Unit with a help of a V shape bended brass piece
-
www.tacticalmodels.com.ar
Pegar por fuera del canastoPaste from outside of the basket
PIEZAS DE FOTOGRABADO / Photoetched parts
Detalle del espejo retrovisorRearview mirror detail
Doblar cuidadosamente las placas de latn utilizando una regla o algo similar como gua para marcar los angulosBend the brass sheet carefully, in order to achieve best results use a ruler to aid to achieve pronounced angles
Detalle del espejo retrovisorRearview mirror detail
Posicin de la calcas en ambos ladosDecals position in both sides
Pegar por fuera del canastoPaste from outside of the basket
Pegar por dentro del canastoPaste inside of the basket
Pegar por dentro del canastoPaste inside of the basket
PINTURA / PAINT Desert YellowHumbrol Nr.93 - Tamiya XF-59
Posicin de la calcas en ambos ladosDecals position in both sides
Pgina 1Pgina 2