INSTEEL WIRE PRODUCTS MATERIAL CERTIFICATION OF COMPLIANCE ... · 411100 INSTEEL WIRE PRODUCTS...
Transcript of INSTEEL WIRE PRODUCTS MATERIAL CERTIFICATION OF COMPLIANCE ... · 411100 INSTEEL WIRE PRODUCTS...
INSTEEL WIRE PRODUCTS
MATERIAL CERTIFICATION OF COMPLIANCE and TEST REPORT Hazie Twp, PA
Insteel Wire Products hereby certifies that the Steel Welded Wire Reinforcement material identified below has been manufactured in accordance with and meets the requirements of: ASTM - A 497 —07.
Sales Order Number: 387844-1 BOL Number: 0114368
387848-1 P0 Number: VERBAL—YOSSI 387848-2
Job/Heat Number: 635367 Item: 553-201869 Product Description: 6 X 6 D4/D4 (.226/.226) JR 60 (+) X 10' (+) RG PKG:50
EPDXY WELD SHEAR TESTS
Quality Assurance Manager: Date: 24-SEp-2012
Page: 7 of 7
THE GORDON SUPM, CO. 131-15 MERRIC1( BLVD JAMAICA, NY 11434
1(718) 527-8827 FAX (718) 527-89k
CUSTOMER NAME: STOCK
CUSTOMER P0 #: 0
IVY ITEM 4: 87-003
SHEET DESIGNATION: 4 x 4 D 4.0 /
CERTIF ICATION TEST REPORT IVY STEEL & WIRE, INC.
QUALITY CONTROL DEPARTMENT 503 FOREST RD. HAZLETON, PA 18202
TELEPHONE (570)450-2090 .(800)821-1323
ORDER #: 12787
MESH # 3048
0 4.0 60 x 10.00 GRADE: 70
THE GORDON SUPPLY, Co. 131-15 MERRICK BLVD JAMAICA NY 11434
1(718) 527-8827 FAX (718) 527-8955
CURRENT DATE: 03/18/08
DATE TESTED: 02/07/08
SAMPLES REQUIRED 4
SHEET QUANTITY: 9602
THE PROPERTIES OF THE MATERIAL ORDERED WERE TESTED FOR COMPLIANCE WITH ASTM SPECIFICATIONS A496 AND A497 WITH THE FOLLOWING RECORDED RESULTS:
LONGITUDINAL SAMPLE ( 4.0 ) 1 2 3 4 AVG NOMINAL RESULT HEAT NO: 41462c
WEIGHT PER FOOT(LBS): 0.130 0.131 0.130 0.130 0.130 0.136 PASS
YIELD LOAD(LBS): 3350 3190 3200 3180 3230 2800 PASS
YIELD STRENGTH(KSI): 83.8 79.8 80.0 79.5 80.8 70.0 PASS
TENSILE LOAD(LBS): 3986 4085 4062 4153 4072 3200 PASS
TENSILE STRENGTH(KSI): 99.7 102.1 101.6 103.8 101.8 80.0 PASS
DEFORMATION HEIGHT(IN): 0.0180 0.0180 0.0160 0.0160 0.0170 0.0102 PASS
BEND TEST: PASS
TRANSVERSE SAMPLE ( 4.0 ) 1 2 3 4 AVG NOMINAL RESULT HEAT NO: 42544d
WEIGHT PER FOOT(LBS): 0.130 0.131 0.135 0.131 0.132 0.136 PASS
YIELD LOAD(LBS): 3300 3280 3220 2920 3180 2800 PASS
YIELD STRENGTH(KSI): 82.5 82.0 80.5 73.0 79.5 70.0 PASS
TENSILE LOAD(LBS): 4211 4166 4211 4018 4152 3200 PASS
TENSILE 5TRENGTH(KSI): 105.3 104.2 105.3 100.5 103.8 80.0 PASS
DEFORMATION HEIGHT(IN): 0.011 0.011 0.013 0.013 0.0120 0.0102 PASS
BEND TEST: PASS
WELD SHEAR(PSI) 1641 2031 2469 1759 1975 1400 PASS
STATEMENT THE UNDERSIGNED CERTIFIES THAT THE ABOVE IS A TRUE AND ACCURATE REPRESENTATION OF THE TEST RESULTS OBTAINED ON THE DESCRIBED MATERIAL AS APPEARING ON COMPANY RECORDS. THIS DOCUMENT CERTIFIES THAT THE MATERIAL MENTIONED ABOVE MEETS THE REQUIRED ASTM SPECIFICATIONS AND THAT ALL MATERIAL WAS PROCESSED WITHIN THE UNITED STATES OF AMERICA.
THE MATERIAL TESTED DOES DOES NOT CONFORM WITH THE ABOVE STATEMENT
ALL MATERIAL USED IN THIS PRODUCT IS OF PURELY DOMESTIC ORIGIN
REGARD
Justin Kammerdiener QUALITY CONTROL
411100 INSTEEL WIRE PRODUCTS
MATERIAL CERTIFICATION OF COMPLIANCE and TEST REPORT Hazie Twp, PA
Insteel Wire Products hereby certifies that the Steel Welded Wire Reinforcement material identified below has been manufactured in accordance with and meets the requirements of: ASTM - A 497 —07.
Sales Order Number: 387844-1 BOL Number: 0114368
387848-1 P0 Number: VERBAL—YOSSI 387848-2
Job/Heat Number: 605312 Item: 533-170737 Product Description: 6 X 6 D5.51D5.5 (.265/.265) DR 60' (.50+50) X 10' (3+3)
YIELD TESTS
I Wire Size Test No.
Req'd Yield Strength psi
Actual Yield Strength psi Pass/Fail
I Longitudinal Transverse Convoluted
D5.5 1 80000 96851 PASS
D5.5 1 80000 95215 PASS
TENSILE TESTS
Wire Size Test No.
Deformed Nominal
Lbs/Ft
Nominal Wire DIA (Inches)
Nominal Area
Sq. In. Tensile ROA Bend Heat No Longitudinal Transverse Convoluted
D5.5 1 0.1870 0.265 0.0550 112085 PASS DL12103314
D5.5 1 0.1870 0.265 0.0550 107848 PASS DL12103314
WELD SHEAR TESTS
WIRE SIZES: p5 5 PU
Test Number 1 2 3 4 Average Pass/Fail I Break Load I
4102 I
3969 I
4423 I
3568 I
4016 I
PASS (Lbs Of Force)
MINIMUM BREAK LOAD REQUIRED: 1925 LBS OF FORCE
The use of this product conforms with Buy America Requirements set forth in 23 CFR Subpart D, Section 635.410, Buy America Requirements and Title 49 - Transportation, Chapter VI - Federal Transit Administration, Department of Transportation Part 661 - Buy America Requirements - Surface Transportation Assistance Act of 1982, As Amended.
Quality Assurance Manager: Date: 24—SEP-2012
Page: 3 of 7
THE GORDON WPM, CO. 13115 MERRICK BLVD JAMAICA. Y 11434
1 (718)27 9827 FAX (718) 527-EN 411100 INSTEEL WIRE PRODUCTS
MATERIAL CERTIFICATION OF COMPLIANCE and TEST REPORT Hazie Twp, PA
Insteel Wire Products hereby certifies that the Steel Welded Wire Reinforcement material identified below has been manufactured in accordance with and meets the requirements of: ASTM - A 497 —07.
Sales Order Number: 389971-1 BOL Number: 0117819
389983-1 P0 Number: YOSSI1 109 Job/Heat Number: 689783 YOSSI1 109A
Item: 533-176543 Product Description: 6 X 6 D7.51D7.5 (.3091.309) DR 60' (.50+.50) X 10'(3+3)
YIELD TESTS
Wire Size Test No.
Req'd Yield Strength psi
Actual Yield Strength psi Pass/Fall Longitudinal Transverse Convoluted
D7.5 1 80000 83686 PASS
D7.5 1 80000 86336 PASS
TENSILE TESTS
Wire Size Test No.
Deformed Nominal
Lbs/Ft
Nominal Wire DIA (Inches)
Nominal Area
Sq. In. Tensile ROA Bend Heat No Longitudinal I
Transverse Convoluted
D7.5 1 0.2550 0.309 0.0750 112726 PASS DL12103690
D7.5 1 0.2550 0.309 0.0750 116465 PASS DL12103687
WELD SHEAR TESTS
WIRE SIZES: D7.5 / D7
Test Number 1 2 3 4 Average Pass/Fail
Break Load 3902 4404 I I
3702 4463 I
4118 PASS (Lbs Of Force)
MINIMUM BREAK LOAD REQUIRED: 2625 LBS OF FORCE
The use of this product conforms with Buy America Requirements set forth in 23 CFR Subpart D, Section 635.410, Buy America Requirements and Title 49 - Transportation, Chapter VI— Federal Transit Administration, Department of Transportation Part 661 - Buy America Requirements - Surface Transportation Assistance Act of 1982, As Amended.
Quality Assurance Manager: Date: 21—NOv-20 12
THE GORDON SUrPLV, CO. 131-15 MERRICK BLVD JAMAICA. V 11434
1(718) r27 9827 FAX (718) 5274O
Page: 2 of 2
7172494991
L5-41/1 (6-U9) I
VeP'
pennsy[vania CERTIFICATE OF COMPLIANCE DEeAIiTMENT OF TRANSPORTATION I
(REPRODUCE LOCAL(Y Fillable Fields/Pr..i
1. • COUNTY:
• LRISR: 4 SEC/SEG: ECMS#:
• (To be completed by the party that will ship the material to the project, otherwise leave blank.)
2. I / WE hereby certify that the material listed on line 5 was:
LI Manufactured LI Fabricated X Coated LI Precasted LI Produced
By Lane Enterprises, Inc. 89-223 (Name of Manufacturer, Fabricator, Coaler. Precaster or Producer) (Supplier Code)
3. and the party listed above certifies that the material(s) on line 5 meets the requirements of
Publication 408, Section(s), 709.3(A), 1092
AASHTO, ASTM, Federal or other designation ASTM A-884
4. The material listed below is being shipped to Ivy Steel & Wire % Callahanjvinci (Company Name)
APPROVED MATERIAL AS LISTED IN BULLETIN # 14 or 15. 5. BULLETIN #41 or 42 PRODUCERS, LIST HMA / PCC JMF.
Heat Number Quantity Description
200 Sheets 6x6D16xDI6 78"x13'-6"
LOTNUMBER DESCRIPTION 9986007450 720A009 Greenbar Long Gel Fushion Bond Epoxy Powder
6. CHECK HERE IF YOUR PRODUCT CONTAINS IRON OR STEEL I/WE certify that we received a copy
of the Mill Certification Form(s) from the manufacturer(s) of any steel or iron materials contained in our product and all manufacturing processes including coatings application (e.g.. epoxy, galvanizing, or painting) have occurred in the United States and we are maintaining copy(s), in our tiles in accordance with Section 106.03(b)3. Note: While coating materialsthemselvesarenotcovered by Buy Americ,a the anDlicaijon of the
i se Liseci in tstllietin T, or I-'roaucer Listed in
materials on steel or iron must occur n the United States. 7.
VENDOR CLASSIFICATION - CHECK ONE BLOCK ONLY X 4 1 Manufacturer Fabricator, Coaler, Precaster LI if 2 Distributor, Supplier or PrivateLabelCompany
Listed in Buietin 4 15. or Producer Listed in Bulletin #14, 41 or42 Not Listed in Bulletin if 15
I certify that the above statements are true and Also, complete line 9
I certify that tF material bejnq supplied is on ariçt the
to the best of my knowledge, fairly and accurately same s provided to us y tli manufacturer, listea on tflis document and quantities listed aoove are accurate.
describe the product(s) listed.
8. NAME (print): GaryHinkelman TITLE: Manager
COMPANY NAME: Lane Enterprises, Inc.
SIGNATURE:
DATE: '
9. List company that sold you the material(s) documented above: (Complete if you checked Block if 2 on line 4 7, otherwise leave blank.) (Company Name)
After completing the Certificate of Compliance form CS-4171, maintain the original at your company's location. A copy of the Certificate of Compliance form must accompany your material shipment to its next destination. Also, if you receive material shipments from other companies related to PennOOT projects, the accompanying
Certificate of Compliance forms must be kept on file at your location. These tiles must be available for inspection and verification by a Department Representative for a period of not less than THREE years from
the date of the last shipment.
* Private Label Companies must identify the true manufacturer (Line 2) and the approved material (Line 5)
as listed in Bulletin # 15.