Industriestr. 2

36088 Hünfeld

We take no responsibility for damages due to wrong installation.

T-Pipe Installation Chrysler 300C CRD

Remove the engine cover.

The red marked part is getting replaced by the T-pipe.

Industriestr. 2

36088 Hünfeld

We take no responsibility for damages due to wrong installation.

Remove the clamp and pull off the hose.

Remove the red rubber gasket from the hose.

Industriestr. 2

36088 Hünfeld

We take no responsibility for damages due to wrong installation.

The plastic-pipe going to the turbocharger has to be cut like in the picture.

Industriestr. 2

36088 Hünfeld

We take no responsibility for damages due to wrong installation.

Cut the T-pipe along the red line like shown.

Industriestr. 2

36088 Hünfeld

We take no responsibility for damages due to wrong installation.

First connect te T-pipe with the plastic-pipe and then with the turbocharger.

Then re-connect the small hose tot he T-pipe.

After adjusting the position, tighten the clamps.