Installation Instructions - Truss Ties and Accent Plates

V2.00 - Installation Instructions, Specifications and Project Plans are effective 11/6/2017 . This information is updated periodically and should not be relied upon after 2 years from 11/6/2017 . Please visit OZCOBP.com to get current information.

for details on Truss cut lengths, see available instructions• Truss Base Fan Calculator• Truss Base Fan King & Web Post Cuts• Truss Base Fan Custom Angle

product is versatile and not limited to installation shown

Truss Connectors can be installed on both sides of lumber for additional beauty & strength (not required)

Installation Instructions, OZCO Truss System 1

Installation Instructions, OZCO Truss System


8:12 Truss Base Fan (TBF-8-12)56619

centerline alignment feature

additional fastener location(optional)

6:12 Truss Base Fan (TBF-6-12)56643 4:12 Truss Base Fan (TBF-4-12)

56642



Fastener NOT included as each installation is unique depending on strength required and

lumber size usedsee Fasteners page

all connectors to be centered on lumber unless noted

Large TBFInstallation Instructions, OZCO Truss System 3


Truss Base Fan-T (TBF-T)56645



Truss Base Fan 3 Point (TBF-3-PT)56646

Fastener NOT included as each installation is unique depending on strength required and lumber size used

see Fasteners page


Large TBF Installation Instructions, OZCO Truss System 4


Truss Accent (TA-IW)51711

Truss Accent (TA-LS)56611

Hex Cap Nut

for use with Truss Base Fan and Large Truss Ties.this accessory compliments a strong connection

(56611 shown throughout this installation instruction)

Hex Cap Nuts included

Fastener NOT included as each installation is unique depending on strength required and lumber size used

see Fasteners page

Installation Instructions, OZCO Truss System 5Truss Accents (2 per package)


2 great styles

Same functionality

choose your connection lifestyle

both styles available for most products

Ironwood(517XX series)

Laredo Sunset(566XX series)

Laredo Sunset & Ironwood

Laredo Sunset & Ironwood 6


Flush Inside 90 (FI-90)56615

2108.25

"T" Tie Plate (TTP)56612

260

10.25

"T" Tie Plate Extended (TTP-EXT)57712

Flush Inside 45 (FI-45)56616

Butt Joint Flush56613

Fastener NOT included as each installation is unique depending on strength required and

lumber size usedsee Fasteners page


Large Truss Ties (2 per package)Installation Instructions, OZCO Truss System 7


4" 90 Flush Outside (FO-90-LS-4)56674 (2 per package)



centerline alignment

feature

4" 90 Flush Outside (FO-90-IW-4)51774 (2 per package)

T-Tie 4" Plate (TTP-LS-4)56667 (2 per package)

4" Flush Inside 45 (FI45-IW-4)51768 (4 per package)

T-Tie 4" Plate (TTP-IW-4)51767 (2 per package)

4" Flush Inside 45 (FI45-LS-4)56668 (4 per package)


4" Truss TiesInstallation Instructions, OZCO Truss System 8

Tool Required3/8" Driver

Cap (finger tight)

(Timber Bolt)

Tool Required3/8" Driver

OWT Timber Screw


OWT Timber Bolt

OWT Timber Screw

Reference 56615(all Truss connectors have

both mounting holes)

Timber Screw mounting hole

Timber Bolt mounting hole

2" Timber Bolt Heavy Duty Washer (OWT-TBW-2)56680

for additional Timber Bolt holding power

Fasteners purchased separately.

Must be selected based on length and strength requirements

or

9

FastenersInstallation Instructions, OZCO Truss System

V2.00 - Installation Instructions, Specifications and Project Plans are effective 11/6/2017 . This information is updated periodically and should not be relied upon after 2 years from 11/6/2017 . Please visit OZCOBP.com to get current information. 10Installation Instructions, OZCO Truss

System

Suggested Tools(others may be required)


can be used with other lumber sizes

note: no fasterners shown; customer selection required based on lumber size and strength needed

11Basic Assembly-Truss Base FansInstallation Instructions, OZCO Truss System



note: no fasterners shown; customer selection required based on lumber size and strength needed

12Basic Assembly-Truss TiesInstallation Instructions, OZCO Truss System



Basic Assembly-4" Truss TiesInstallation Instructions, OZCO Truss System 13


56616

56612

56668

1/2"

56619-2056642-44

CL56674

56615Truss Connectors can be installed on both sides of lumber for additional beauty & strength (not required)

14Typical InstallationInstallation Instructions, OZCO Truss System


56646

asdesired

56645

CL

5771257767

57713

Truss Connectors can be installed on both sides of lumber for additional beauty & strength (not required)

15Typical InstallationInstallation Instructions, OZCO Truss System


not sold as shown; end user must choose Truss Accent Style and appropriate fasteners (Timber Screws or Timber Bolts-not shown)

Truss Base FanKing & Web Post Cuts

Truss Base Fan King & Web Post Cuts 1

cutcut

Truss Base Fan

Post King Post

Web

Truss Accent

Post

Web

cut

(Laredo Sunset shown)

cut

cut

cut


Suggested Tools(others may be required)

10Truss Base Fan King & Web Post Cuts


step 2mirror cut

miter saw recommended for best results

step 2

How-To...King Post cutTruss Base Fan King & Web Post Cuts 4

see following pages for A dimension

step 1angle length

cut

CL

your beamwidth

~1.75-2.00 A

step 1

King Post cuts vary depending on individual preference & size of upper beam. This one is for 2x upper beam

raw stock


step 1

raw stock

see following pages for L1, L2 & A dimensionsHow-To...Web cutTruss Base Fan King & Web Post Cuts 5

step 1angle length

cut

L1 A

miter saw recommended for best results

step 2

step 2perpendicular

cut

L2


Truss Base Fan 4:12 (TBF-4-12)Item #: 56642 Typical Installation & Basic Assembly

Truss Base Fan King & Web Post Cuts

Product & Packaging Specs

Weight: 87.59 LBSScale: 1:6Last updated: 6/23/2017

6

see 56642 Truss Base Calculator for King Post, Web Post and Rafter (now shown) cut lengths

all lumber/dimension shown is 4x6. cuts will be different if other sizes are used.

backside

L1=3 516 "

L2=5 116 "

A =19.43°

12 "








7

backside

L1=2 58 "

L2=5 14 "

A =26.57°

12 "






8



backside

L1=2 316 "

L2=5 58 " A =34°

12 "








9

backside

L1=1 1516 "

L2=6 116 "

A =40°

12 "






10



backside

L1=1 1316 "

L2=6 12 "

A =45°

12 "

Installation Instructions - Truss Ties and Accent Plates

Documents

Transcript of Installation Instructions - Truss Ties and Accent Plates