V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

Installation Instructions,4x4 Twin Rail Saddle (56630)

4x4 Single Rail Saddle (56631)2x4 Top Rail Saddle (56641)

Installation Instructions, Rail Saddles 1

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

56641

56630

OZCO3Installation Instructions, Rail Saddles

56631

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

Suggested Tools(others may be required)

4Installation Instructions, Rail Saddles

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

4x

1x

Mount Base to Surface

or

4x

4x

Base Mounting-56630 & 56631(select fastener that suits your installation)

5Installation Instructions, Rail Saddles

1x

or

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

= =

= =

step 1 -56630 & 566316Installation Instructions, Rail Saddles

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

inline configuration

Tool Required3/8" Driver

(HCN)

(OWT Timber Screw)

corner configuration

step 2 566307Installation Instructions, Rail Saddles

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

step 3 566308Installation Instructions, Rail Saddles

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

Tool Required3/8" Driver

(HCN)

(OWT Timber Screw)

step 2 566319Installation Instructions, Rail Saddles

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

step 3 5663110Installation Instructions, Rail Saddles

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

shown with 56607(sold separately)

56641 installation11Installation Instructions, Rail Saddles

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

step 4

base mounting

38

1.50

step 1

step 2

additional instructionscenter post as shown in •previous stepsinstall 1 compression plate •with fastenersremove, reposition & reinstall •post/compression plate as shown with plate facing wallcomplete assembly as shown•

this procedure applies to all OZCO Post Bases & Post Anchors utilizing compression plates (56607 shown)

step 3

Special Instructions-mounting next to wall12Installation Instructions, Rail Saddles

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

relief cut

Installation Idea's-5664113Installation Instructions, Rail Saddles

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

56641

56631

56630(corner

configuration)

56630(inline

configuration)

Porch standalone14Installation Instructions, Rail Saddles

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

Multi-level15Installation Instructions, Rail Saddles

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.

Stairs16Installation Instructions, Rail Saddles