Bottle Opener56600

V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, Bottle Opener 1

120.654.75

77.223.04

78.493.09

76.203.00

134.495.29

Bottle Opener

28.991.14

66.522.62

fasteners included

Catcher

56600V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, Bottle Opener 2

V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, Bottle Opener

Suggested Tools(others may be required)

3

4x4 post

do not fully tighten Catcher fasteners to allow for easy removal to discard bottle caps

1x6 board

50 MIN2 MIN

Tool Required3/8" Driver

139.705.50

1x6 boardshown with .125 chamfered edges

see next page for 1:1 hole location template

19.05.75

304.8012.00

this procedure is for mounting to 4x4 post only

board mount to postV1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, Bottle Opener 4

7.94.31

69.852.75

152.406.00

CL

CL

this procedure is for mounting to 4x4 post only

board mount to post1x6 board1:1 scale template

V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, Bottle Opener 5

6x6 (or larger) post

do not fully tighten Catcher fasteners to allow for easy removal to discard bottle caps

50 MIN2 MIN

Tool Required3/8" Driver

7

mounted to postV1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, Bottle Opener

brick or masonry wall

do not fully tighten Catcher fasteners to allow for easy removal to discard bottle caps

50 MIN2 MIN

note:for this application, supplied fasteners will NOT be used.see local home improvement center for proper fastener recommendation

7

mounted to brick wallV1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationInstallation Instructions, Bottle Opener